cimas group - TecnAlimentaria

Commenti

Transcript

cimas group - TecnAlimentaria
The production activity started some years ago
in Bizerte (Tunisia) through a new facility for the
manufacturing of machinery and complete systems for
cereals receiving & storage and feed mill plants, has by
now reached its seventh year of workability.
Compared to the initial forecasts the results till now
obtained, both on a product quality point of view and
production efficiency, surpassed the expectations.
On the 24th of April 2014, CIMAS obtained the
ISO 9001:2008 Quality Certification thanks to
manufacturing processes and overall company
structure’s levelling to the European standards.
CIMAS SRL
VIA VAL DI ROCCO, 42
06134 PONTE FELCINO (PERUGIA) ITALY
TEL. +39 075 59 18 339 - FAX +39 075 591 30 63
[email protected]
CIMAS INDUSTRIE SARL
241-243 AV. HABIB BOURGUIBA
7000 BIZERTE, TUNISIE
TEL. +216 72 42 01 10 – FAX +216 72 42 06 89
[email protected]
www.cimasitalia.it
www.cimasindustrie.tn
In the Bizerte’s factory the company nowadays
manufactures roughly 80% of all the system’s
equipment, the production is not only exported in the
Maghreb area (Algeria, Morocco, etc..) but even in
Europe and in particular in Italy and Romania.
The winning point that enabled it to reach good results
on all points of view has been its capacity to train and
manage the Tunisian staff; thanks to the know-how of
the all Italian technical staff, high-grade roles within
the company have raised in all the departments. Today,
CIMAS can go on record as saying that the choice of
outsourcing in Tunisia has been – without any doubt –
CIMAS GROUP
CIMAS INDUSTRIE SARL
241-243 Av. Habib Bourguiba 7000 Bizerte, Tunisie
Tel. +216 72 42 01 10 - Fax +216 72 42 06 89
[email protected]
www.cimasindustrie.tn
CIMAS SRL
Via Val di Rocco, 42
06134 Ponte Felcino (Perugia) Italy
Tel. +39 075 59 18 339 - Fax +39 075 591 30 63
[email protected]
www.cimasitalia.it
positive, even in consideration of the development that
the African market will have in the next years.
In Italy, in the production facility in Perugia, the
prevalent word carried out is engineering, research &
development of new technologies and manufacturing
of high-efficiency machinery (pellet mills, hammer
mills, electric & electronic devices for system’s control
and management, etc.).
Both facilities are perfectly integrated with the
common goal to engineer and manufacture machinery
and systems as efficient and long-lasting as possible,
to fully satisfy the market requirements.