Mechanics
Transcript
Mechanics
Mechanics 2013 Publications Journals with Impact Factors I. Kuselman, F. Pennecchi, A. Fajgelj, Y. Karpov: Human errors and reliability of test results in analytical chemistry. Accreditation and Quality Assurance, Vol. 18, no. 1, pp. 3-9, 2013 (IF 1.132). A. Malengo, F. Pennecchi: A weighted total least-squares algorithm for any fitting model with correlated variables. Metrologia, Vol. 50, pp. 654-662, 2013 (IF 1.902). A. Malengo, N. Testa, D. Torchio: Final report on EURAMET.M.M-S4: Bilateral comparison of mass standards between INRIM and MCCAA. Metrologia Technical Supplement, Vol. 50, art. 07011, 2013 (IF 1.902). I. Kuselman, E. Kardash, E. Bashkansky, F. Pennecchi, S.L.R. Ellison, K. Ginsbury, M. Epstein, A. Fajgelj, Y. Karpov: House-of-security approach to measurement in analytical chemistry: quantification of human error using expert judgments. Accreditation and Quality Assurance, Vol. 18, no. 6, pp. 459-467, 2013 (IF 1.132). O. Francis, H. Baumann, T. Volarik, C. Rothleitner, G. Klein, M. Seil, N. Dando, R. Tracey, C. Ullrich, S. Castelein, H. Hua, W. Kang, S. Chongyang, X. Songbo, T. Hongbo, L. Zhengyuan, V. Pálinkás, J. Kostelecký, J. Mäkinen, J. Näränen, S. Merlet, T. Farah, C. Guerlin, F. Pereira Dos Santos, N. Le Moigne, C. Champollion, S. Deville, L. Timmen, R. Falk, H. Wilmes, D. Iacovone, F. Baccaro, A. Germak, E. Biolcati, J. Krynski, M. Sekowski, T. Olszak, A. Pachuta, J. Agren, A. Engfeldt, R. Reudink, P. Inacio, D. McLaughlin, G. Shannon, M. Eckl, T. Wilkins, D. van Westrum, R. Billson: The European Comparison of Absolute Gravimeters 2011 (ECAG-2011) in Walferdange, Luxembourg: results and recommendations. Metrologia, Vol. 50, pp. 257-268, 2013 (IF 1.902). K. Jousten, K. Arai, U. Becker, O. Bodnar, F. Boineau, J.A. Fedchak, V. Gorobey, W. Jian, D. Mari, P. Mohan, J. Setina, B. Toman, M. Vicar, Y. Hong Yan: Final report of key comparison CCM.P-K12 for very low helium flow rates (leak rates). Metrologia, Vol. 50, Tech. Suppl., art. 07001, 2013 (IF 1.902). N. Owen, M. Bergoglio: Final report on APMP.M.P-S3: Results of the supplementary comparison in gas media in the range 1.77 MPa to 6.8 MPa. Metrologia (Technical Supplement), Vol 50, art. 07007, 2013 (IF 1.902). F. Pennella, G. Cerino, D. Massai, D. Gallo, G. Falvo D'Urso Labate, A. Schiavi, M.A. Deriu, A. Audenino, U. Morbiducci: A survey of methods for the evaluation of tissue engineering scaffold permeability. Annals of Biomedical Engineering, Vol. 41, no. 10, pp. 2027–2041, 2013 (IF 2.575). M. Zucco, L. Robertsson, J.-P. Wallerand: Laser-induced fluorescence as a tool to verify the reproducibility of iodine-based laser standards: a study of 96 iodine cells. Metrologia, Vol. 50, pp. 402-408, 2013 (IF 1.902). C.P. Sasso, E. Massa, G. Mana: The watt-balance operation: magnetic force and induced electric potential on a conductor in a magnetic field. Metrologia, Vol. 50, pp. 164-169, 2013 (IF 1.902). D. Quagliotti, G. Mana, E. Massa, C. Sasso, U. Kuetgens: A finite element analysis of surfacestress effects on measurement of the Si lattice parameter. Metrologia, Vol. 50, pp. 243-248, 2013 (IF 1.902). L. Bergamaschi, G. DAgostino, L. Giordani, G. Mana, M. Oddone: The detection of signals hidden in noise. Metrologia, Vol. 50, pp. 269-276, 2013 (IF 1.902). H. Bettin, K. Fujii, J. Man, G. Mana, E. Massa, A. Picard: Accurate measurements of the Avogadro and Planck constants by counting silicon atoms. Annalen der Physik, Vol. 525, nos. 8-9, pp. 680-687, 2013 (IF 1.510). E. Massa, G. Mana: An automated resistor network to inspect the linearity of resistancethermometry measurements. Measurement Science and Technology, Vol. 24, art. 107001, 2013 (IF 1.435). E. Massa, G. Mana, J. Krempel, M. Jentschel: Polarization delivery in heterodyne interferometry. Optics Express, Vol. 21, no. 22, pp. 27119-27126, 2013 (IF 3.546). Other journals L.O. Becerra, S. Lorefice, F. Pennecchi: Hydrometer Calibration: Linking Sim Nmis to the Euramet Key Comparison Reference Value of Euramet.M.D-K4. Ingenieria – Revista de la Universidad de Costa Rica, Vol. 22, no. 2, pp. 95-105, Agosto /Dicembre 2012. G.E. D'Errico, N. Murru: In-Process Estimation of Time-Variant Contingently Correlated Measurands. International Journal of Metrology and Quality Engineering, Vol. 3, no. 3, pp. 137 – 143, 2012 (online version issued in 2013). International Conference Proceedings A. Malengo, G. La Piana, A. Rivetti, G. Martini: The centrifugal balance for mass measurement in space. 84th Annual Meeting of the Aerospace Medical Association, Chicago (USA), May 2013 (slides online proceedings). A. Piccato, P.G. Spazzini, R. Malvano: Flow features in a renewed wind tunnel. Proceedings of the 16th International Flow Measurement Conference (FLOMEKO), Paris (France), September 2013 (USB Pen Drive). A. Piccato, P.G. Spazzini, R. Malvano: Traceability in anemometry: a rotating arm as airspeed primary standard. Proceedings of the 16th International Flow Measurement Conference (FLOMEKO), Paris (France), September 2013 (USB Pen Drive). C. Marinari: The new INRIM primary standard of water flow rate. Proceedings of the 16th International Flow Measurement Conference (FLOMEKO), Paris (France), September 2013 (USB Pen Drive). C. Marinari, F. Saba: The INRIM Water Flow Rate Primary Standard revamping. Proceedings of the 16th International Metrology Congress, “Metrologie 2013”, Paris (France), October 2013 (online at http://cfmetrologie.edpsciences.org/). M. Pisani, M. Zucco, V. Caricato, A. Egidi: Hyperspectral imaging: a tol for biological measurements. Proceedings of the 16th International Congress of Metrology, Paris (France), October 2013 (online at http://cfmetrologie.edpsciences.org/). M. Pisani, M. Astrua: Towards the realization of the new INRIM angle comparator. Proceedings of the 13th Euspen International Conference, pp. 179-183, Berlin (Germany), May 2013. R. Bellotti, G.B. Picotto: A modified z-stage control of the metrological AFM at INRIM. Nanoscale 2013, 10th Int. Seminar on Quantitative Microscopy, pp. I1.7, Paris (France), April 2013 R. Bellotti, G.B. Picotto: Calibration and testing of an optical profilometer. Nanoscale 2013, 10th Int. Seminar on Quantitative Microscopy, pp. I4.1, Paris (France), April 2013. Book chapters W. Bich: Error, uncertainty and probability. Proceedings of the International School of Physics "Enrico Fermi", Course 185, "Metrology and Physical Constants", edited by E. Bava, M. Kühne, A.M. Rossi, pp. 47-73, 2013. M. Pisani: Interferometric measurements at the picometer scale. In Fundamentals of Picoscience, a cura di Klaus D. Sattler, Taylor&Francis Group/CRC Press, 2013. Books G. Barbato, A. Germak, G. Genta: Measurements for decision making. Measurements and Basic Statistics. Società Esculapio Editrice, Bologna (Italy), 2013. Technical Reports and Reports for Research Contracts F. Pennecchi, A. Malengo, W. Bich: Statistical Methods for Measurement Uncertainty. Technical Note 1, contratto n. 1550003960 con Thales Alenia Space, Uncertainty Budgets for Magnetic Dipole Models, maggio 2013. J. Berry, M. Borys, S. Davidson, M. Firlus, P. Fuchs, S. Kacmaz, A. Malengo, N. Medina, P.A. Meury, A. Picard: Report on the CCM WG TG1 pilot comparison to measure water vapour sorption on stainless steel mass standards. NPL REPORT ENG 46, November 2013. W. Bich, I. Mills, C. Thomas: Consultative Committee for Units (CCU)-Report of the 21st meeting (11-12 June 2013) to the International Committee for Weights and Measures. BIPM settembre 2013. E. Biolcati, C. Origlia, A. Germak, F. Mazzoleni, F. Vitiello: Absolute and relative measurements of the free-fall acceleration in Clui-Napoca, Romania. INRIM Technical Report no. 11/2013, May 2013. E. Biolcati, C. Origlia, A. Germak, F. Mazzoleni, F. Vitiello: Absolute measurements of the free-fall acceleration in Arcavacata, CS (Italy). INRIM Technical Report no. 29/2013, December 2013. M. Bergoglio, D. Mari, F. Boineau: Gas flow measurements performed at INRIM and LNE. INRIM Technical Report no. 3/2013, February 2013. A. Piccato: New facility design for weather stations test at INRIM. INRIM Technical Report no. 4/2013, February 2013. F. Saba: Mathematical model and uncertainty propagation for the INRIM Thermal Energy Standard. INRIM Technical Report no. 12/2013, July 2013. F. Saba, M. Orio, F. Grisotto: Metrological characterization of Thermo Fluid Dynamic Bath (BTF01) used to calibrate the temperature transducers of thermal-hydraulically Mockup Ecothermo. INRIM Technical Report no. 14/2013, July 2013. A. Piccato, P.G. Spazzini: Gap analysis per l’accreditamento del laboratorio di taratura Metersit. Rapporto Tecnico INRIM n. 27/2013, novembre 2013. C. Marinari: EURAMET PROJECT – nr. 1233 Intercomparison of Water Meter Reference Standard. Technical memorandum by INRIM. C. Marinari: Technical parameters of MockUp plant. REVIEW MEETING - FP7 Project n. 315025 Ecothermo, Brussel, September 2013. M. Pisani: Technical note 4 – COATS critical design Report. 22 febbraio 2013. M. Pisani: Progress Report, COATS project. aprile 2013. M. Pisani: Technical note 5 – COATS breadbording and test plan Report. novembre 2013. M. Pisani: relazione finale progetto Hyperspectra. dicembre 2013. V. Caricato: Analisi teorica e sperimentale dello shot noise di un sensore CCD per Imaging Iperspettrale. Rapporto Tecnico INRIM n. 21/2013, ottobre 2013. P. Pedone, A. Balsamo: GEMIL (Geometrical Errors by Measurement of Independent Lines). Rapporto Tecnico - fase 3, dicembre 2013. G.B. Picotto, M. Pometto: Confronto interlaboratorio su campioni di rugosità a gradino. Report Draft A, febbraio 2013. G. Mana: JRP Interim Progress Report, project kNOW. 6 month, April 2013. G. Mana: JRP Interim Progress Report, project kNOW. 12 month, October 2013.