Stampa

CLT10 sc Sensore per il cloro totale con sensore differenziale
pHD (su pannello)
Numero
prodotto: LXV45B.98.23022
EUR Prezzo: Contatti
Disponibile
CLT10 sc / CLF10 sc: Sensori per l'analisi del cloro libero e totale senza reagenti
Sensore per il cloro totale con sensore differenziale pHD (su pannello)
The CLT10 sc Total Chlorine Analyser measures total chlorine continuously for real time process control. It is based on amperometric
technology and is fully compatible with all of Hach's digital controllers. The CLT10 sc can be used in most municipal and industrial
applications, and is best utilised where waste stream management is a constraint. Hach‘s self diagnostics alerts you when the
process has changed or the instument needs servicing.
Diagnostic features include the CAL WATCH algorithm
for warning of pH and chlorine calibration deviation and
a non-contacting sample flow sensor for notification of
insufficient sample flow. All warnings are easy to configure.
Disinfezione sotto controllo
The CLF10 sc and CLT10 sc Chlorine Analyzers are designed to be used with all Hach sc digital controllers. Set up is fast and easy, and the
system is compatible with the full line of Hach digital sensors.
Costi di esercizio minimi
Plug & play
Controllo dei processi in tempo reale
Conforme ai requisiti EPA secondo la metodica 334.0
Specifiche tecniche
Accuratezza:
Total Chlorine: ± 10 % of the reference test** (DPD) at stable pH less than 8.5 (±0.5 pH unit from
the pH at calibration)
Cavo di collegamento:
5 pin, M12 connector
Certificazioni:
CE compliant for conducted and radiated emissions:
- CISPR 11 (Class A limits)
- EMC Immunity EN 61326-1 (Industrial limits)
Additional certifications when connected to an sc controller
Collegamento:
1/2 in ID
Compatibilità centralina:
sc controller platforms
Compensazione della temperatura:
Internal temperature compensation in the sensor
Condizioni di stoccaggio:
-20 °C - 60 °C dry
Diametro:
25 mm
Dimensioni:
mm x 25 mm (7.68 in x 0.98 in)
Dimensioni (H x L x P):
483 mm x 495 mm x 151 mm
Garanzia:
2 anni
interferenze:
Cloro libero: monocloroammine, biossido di cloro, ozono e carbonati. Cloro totale: biossido di
cloro, ozono e carbonati.
Intervallo di misura:
0 - 20 ppm ppm
Intervallo di pressione:
0.5 bar, no pressure impulses and/or vibrations
Intervallo pH:
4-9
Larghezza:
495.3 mm
Limite di rilevamento:
30 ppb (0.03 ppm)
lunghezza:
Sensor: 195 mm
Lunghezza del cavo:
1 m (between gateway and sc controller)
Materiale:
Panel: Corrosion-resistant, fully-submersible (stainless steel, PVC, silicon rubber and
polycarbonate)
Metodo di misura:
Reagentless, electrochemical, three-electrode amperometric system
Metodo di taratura:
1-point or 2-point (zero and slope) calibration
Montaggio:
Panel or Wall Mounting
Parametro:
Total Chlorine
Peso:
5.5 kg Approximately 5.5 kg (12 lbs)
Panel and empty panel-mounted components only
Peso della spedizione/Peso spedizione:
Approximately 20 lbs (9.1 kg)
Portata:
Metric
Requisiti Alimentazione (Voltaggio):
None
Ripetibilità:
30 ppb ppb or 3%, whichever is greater
Risoluzione:
0.001 ppm (1 ppb)
Temperatura del campione:
5 - 45 °C (41 to 113 °F)
Temperatura di lavoro:
0 - 45 °C
Tempo di risposta:
Total Chlorine: 100 s seconds or less for 90% change (T90) at a stable temperature and pH
Velocità di flusso del campione:
30 - 50 L/h L/hour (7.9 to 13.2 gal/hour),Optimal is 40 L/hour (10.5 gal/hour)
Product details pdf footer