INDEXRETARD - photo 03
Transcript
INDEXRETARD - photo 03
INDEXRETARD RETARDANT ADDITIVE FOR MORTAR AND CONCRETE FIELD OF USE FOR 4 TH DIVISION PRODUCTS PROBLEM How to increase the workable time of mortars and concrete? SOLUTION FIELDS OF USE An odourless, transparent, water-based solution to retard cement setting and keep the mix workable for as long as possible. A secondary effect improves the fluidity of the mix more or less significantly depending on the amount of product used. INDEXRETARD is mainly intended for concrete with a medium mechanical resistance (Rck 20-30 Mpa). It is particularly suitable for all applications where you want to keep the mix workable and/or have a moderate hydration speed of the cement with fast curing. The most common fields of use are: • pre-packed concrete, especially in warm climates • pumped concrete • concrete casting • retarded cement mortar that can be used many hours after mixing INDEXRETARD is compatible with the other additives for mortar and concrete. METHOD OF USE INDEXRETARD can be added to the water of the mix before the cement so the cement granules will be mixed better, or after having introduced all the components of the mix. In this case the action of the additive is more effective in time. PRECAUTIONS • Don't use in winter or in very cold climates • Mix the product well before using • Don't exceed the recommended doses. SAFETY REGULATIONS • Protect the eyes when mixing • If the product comes into contact with the eyes, wash immediately with abundant water. Construction Systems and Products 4th DIVISION 2nd LINE TECHNICAL CHARACTERISTICS Appearance INDEXRETARD Liquid Colour Transparent/amber Volumic Mass 1,35±0,1 kg/litro Solid residue 18% Main Application Chlorides Delays the initial hydration and maintains workability Water reduction and increase of the workability none Noxious no Flammability no Amount used 0,1-0,6% on the weight of the cement Shelf life 12 months in the original packaging Secondary Application + 5°C WATER-BASED MIX MECHANICALLY MINIMUM TEMPERATURE OF APPLICATION ADVANTAGES RUINED BY FROST RECYCLABLE PRODUCT NON-DANGEROUS WASTE PACKAGING 20-kg cans. 1-kg cans. • Improved workability • Improved fluidity • Increases the duration of the mix INDEX RETARD I GB USO PROFESSIONALE PRIMER PENETRANTE, CONSOLIDANTE PER LASTRE DI CEMENTO AMIANTO E INCAPSULANTE PRIMER PENETRANTE, CONSOLIDANTE PER LASTRE DI CEMENTO AMIANTO E INCAPSULANTE ONE-COMPONENT WATER BASED A TO BE MECHANICALLY MIXED SPRAY APPLICATION H2O TO BE APPLIED BY BRUSH MONOCOMPONENTE VEICOLO TO BE APPLIED BY ROLLER ACQUA MESCOLARE MECCANICAMENTE MINIMUM TEMPERATURE FOR APPLICATION APPLICARE SPRUZZO A KEEP AWAY FROM FROST Partita Lot TEMPERATURA MIN. DI APPLICAZIONE 37060 Castel APPLICARE CON PENNELLO D.P.I. STOCCAGGIO: TEME IL GELO d’Azzano - Verona • FOR PROFESSIONALE USE ONLY • CAMPI D’IMPIEGO. WATERBASE mano di fondo,PRIMER è impiegato per la I prima degli interventi bonifica delle lastre PRIMER, penetrando di cemento amianto, in profondità di demolizione o di sopracopertura. come e di legare le fibre di amianto nell’impasto di cemento WATERBASE dispersione nell’ambiente, superficiale, non amianto, ben coesionate, consente di fissare • MODALITÁ evitando D’IMPIEGO. tutelando i lavoratori addetti Applicare WATERBASE alla bonifica della così la loro copertura. PRIMER, tal quale, superficie nono con pompe Airless • CONSUMO. necessariamente deve essere a bassa pressione, pulita. Circa 0,250 kg/m2 la • AVVERTENZE. per mano. Mani consigliate: due mani. - Applicare WATERBASE PRIMER solo - Il prodotto teme a temperature - Mescolare primail gelo. superiori a +5°C. dell’uso. • NORME DI SICUREZZA - Non respirare i vapori aerosoli. - Evitare il contatto con la pelle e - Non gettare con gli occhi. i residui nelle fognature. - In caso di ventilazione insufficiente usare un apparecchio respiratorio adatto. USE SUITABLE PROTECTION + 5°C APPLICARE CON RULLO UTILIZZARE DISPOSITIVI DI PROTEZIONE INDIVIDUALI - ITALY kg • CAMPI D’IMPIEGO. WATERBASE mano di fondo,PRIMER è impiegato per la GB prima degli interventi bonifica delle lastre PRIMER, penetrando di cemento amianto, in profondità di demolizione o di sopracopertura. come e di legare le fibre di amianto nell’impasto di cemento WATERBASE dispersione nell’ambiente, superficiale, non amianto, ben coesionate, consente di fissare • MODALITÁ evitando D’IMPIEGO. tutelando i lavoratori addetti Applicare WATERBASE alla bonifica della così la loro copertura. PRIMER, tal quale, superficie nono con pompe Airless • CONSUMO. necessariamente deve essere a bassa pressione, pulita. Circa 0,250 kg/m2 la • AVVERTENZE. per mano. Mani consigliate: due mani. - Applicare WATERBASE PRIMER solo - Il prodotto teme a temperature - Mescolare primail gelo. superiori a +5°C. dell’uso. • NORME DI SICUREZZA - Non respirare i vapori aerosoli. - Evitare il contatto con la pelle e - Non gettare con gli occhi. i residui nelle fognature. - In caso di ventilazione insufficiente usare un apparecchio respiratorio adatto. e USO PROFESSIONALE • FOR PROFESSIONALE USE ONLY I • CAMPI D’IMPIEGO. è consigliato per impermeabilizzare muri di fondazione in calcestruzzo. • MODALITÁ D’IMPIEGO. La superficie da trattare deve essere asciutta, pulita e priva di parti di distacco. Le parti friabili vanno eliminate e ricostruite. Per l’adesività sulle superfici porose e secche, è consigliabile la stesura una mano di diluita al 30% con acqua. va mescolato prima dell’uso con trapani mmani di prodotto. Non eccedere nel consumo per mano per non l’evaporazione dell’acqua contenuta nel prodotto applicato. • CONSUMI. 0,500 kg/m2 per mano. INDEXRETARD I GB D F NL ONE-COMPONENT RIVESTIMENTO ELASTOMOERO-BITUMINOSO ALL’ACQUA WATER-BASED ELASTOMER/BITUMINOUS COATING RIVESTIMENTO ELASTOMOERO-BITUMINOSO ALL’ACQUA WATER-BASED ELASTOMER/BITUMINOUS COATING GB • APPLICATIONS. is recommended to waterproof foundations walls made in concrete. • DIRECTIONS. The surface to be treated has to be dry, clean and with no detaching parts. Weak parts have to be eliminated and replaced with new material. In order to improve the adhesive onto porous and dry surfaces, it is recommended to previously spread a first layer consisting in a 30% water-diluted . has to be mixed before use with mechanic drills. Application can be made with brushes, rollers or spraying devices. • CONSUMPTION. 0.5 kg/square metre/year. WATER-BASED ELASTOMER/BITUMINOUS COATING WATER BASED TO BE MEHANICALLY MIXED SPRAY APPLICATION TO BE APPLIED BY PLASTERING TROWEL D A MONOCOMPONENTE • APPLICATIONS. is recommended to waterproof foundations walls made in concrete. • DIRECTIONS. The surface to be treated has to be dry, clean and with no detaching parts. Weak parts have to be eliminated and replaced with new material. In order to improve the adhesive onto porous and dry surfaces, it is recommended to previously spread a first layer consisting in a 30% water-diluted . has to be mixed before use with mechanic drills. Application can be made with brushes, rollers or spraying devices. • CONSUMPTION. 0.5 kg/square metre/year. H2O VEICOLO ACQUA MESCOLARE MECCANICAMENTE TO BE APPLIED BY BRUSH TO BE APPLIED BY ROLLER MINIMUM APPLICATION TEMPERATURE APPLICARE CON PENNELLO APPLICARE CON RULLO TEMPERATURA MIN. DI APPLICAZIONE APPLICARE A SPRUZZO APPLICARE CON FRATTAZZO KEEP AWAY FROM FROST USE SUITABLE PROTECTION STOCCAGGIO: TEME IL GELO UTILIZZARE DISPOSITIVI DI PROTEZIONE INDIVIDUALI D.P.I. + 5°C F • APPLICATIONS. is recommended to waterproof foundations walls made in concrete. • DIRECTIONS. The surface to be treated has to be dry, clean and with no detaching parts. Weak parts have to be eliminated and replaced with new material. In order to improve the adhesive onto porous and dry surfaces, it is recommended to previously spread a first layer consisting in a 30% water-diluted . has to be mixed before use with mechanic drills. Application can be made with brushes, rollers or spraying devices. • CONSUMPTION. 0.5 kg/square metre/year. NL 37060 Castel d’Azzano - Verona - ITALY S.7 - 1.500 - 09/2003gb Partita • FOR ANY FURTHER INFORMATION OR ADVICE ON PARTICULAR APPLICATIONS, CONTACT OUR TECHNICAL OFFICE • IN ORDER TO CORRECTLY USE OUR PRODUCTS, REFER TO INDEX TECHNICAL SPECIFICATIONS © INDEX S.p.A. kg e • APPLICATIONS. is recommended to waterproof foundations walls made in concrete. • DIRECTIONS. The surface to be treated has to be dry, clean and with no detaching parts. Weak parts have to be eliminated and replaced with new material. In order to improve the adhesive onto porous and dry surfaces, it is recommended to previously spread a first layer consisting in a 30% water-diluted . has to be mixed before use with mechanic drills. Application can be made with brushes, rollers or spraying devices. • CONSUMPTION. 0.5 kg/square metre/year. TOTAL QUALITY Environmental Management Systems INTERNET:www.index-spa.com E-MAIL: [email protected] Construction Systems and Products Via G. Rossini, 22 - 37060 Castel D’Azzano (VR) - Italy - Tel. +39.045.8546201 - Fax +39.045.512444 UNI EN ISO UNI EN ISO 9001 14001 ed. 2000 - Vision The figures shown are average indicative figures relevant to current production and may be changed or updated by INDEX S.p.A at any time without previous warning. The advice and technical information provided, is what results from our best knowledge regarding the properties and the use of the product. Conside ring the numerous possible uses and the possible interference of conditions or elements beyond our control, we assume no responsibility regarding the results which are obtained. The purchasers, of their own accord and under their own responsibility, must establish the suitability of the product for the envisaged use. %