CCT-SENSOR Datasheet
Transcript
CCT-SENSOR Datasheet
www.zetaqlab.com CCT-SENSOR Correlated Color Temperature sensor (Lux and °K) Sensore di luminosità (Lux) e temperatura di colore della luce (°K) CCT-SENSOR communicates via Modbus to the Server light level (Lux) and color temperature (°K). CCT-SENSOR is composed by a small 25x25 mm sensor connected to a Modbus controller that ensures the communication with the Server. CCT Control System manages DALI or DMX Tunable White and RGB/RGBW luminaires and is able to set light level and color in relation to the values read by CCT-SENSORs according to user defined algorithms. Il sensore CCT-SENSOR permette di comunicare al Server via Modbus l’intensità luminosa (Lux) e la temperatura di colore della luce (°K) rilevata. CCT-SENSOR è composto da un piccolo sensore di 25x25 mm e dal controller Modbus che permette la comunicazione con il Server. Il sistema CCT Control System controlla apparecchi Tunable White e RGB/RGBW DALI o DMX, impostando intensità e colore in relazione ai valori rilevati dai sensori CCT-SENSOR con algoritmi configurabili dall’utente. Features Caratteristiche • Detects light level (Lux) • Rilevazione dell’intensità luminosa (Lux) • Detects light color temperature (°K) • Rilevazione della temperatura di colore (°K) • Detects R,G,B light components • Rilevazione delle componenti colore R,G,B • Sensor sensibility settable by remote software • Sensibilità del sensore impostabile da remoto via software • Compact 25x25 mm sensor for OEM projects • Sensore compatto (25x25 mm) per progetti OEM • Modbus controller with 150 mm sensor cable • Controller Modbus con cavo sensore da 150 mm • 12 Vdc direct power supply or through control bus • Alimentazione 12Vdc diretta o tramite cavo bus di controllo • Double RJ45 plug for IN/OUT Modbus control bus • Doppio plug RJ45 per IN/OUT bus di controllo Modbus • Diagnostics LED • LED per la diagnostica del modulo • 868/915 MHz wirelles versione available on request • Versione wireless 868/915 MHz disponibile su richiesta • IP20 plastic enclosure • Contenitore plastico IP20 • NOTE: a colorimeter is required during the startup • NOTA: lo stratup richiede la calibrazione con colorimetro Hardware & Software Engineering Via E. Borgazzi 51, 20823 Lentate sul Seveso (MB) Italy www.zetaqlab.com CCT-SENSOR datasheet Rev. 23/01/2015 Specifications subject to change without notice 1 27 mm www.zetaqlab.com Dimensions / Dimensioni 125 mm 27 mm 65 mm 25 mm 25 mm CCT Sensor www.zetaqlab.com 150 mm 125 mm 65 mm Networking / Cablaggio 25 mm CCT Sensor www.zetaqlab.com Controller Sensor 150 mm RJ45 plug for Modbus and power IN CCT Sensor RJ45 plug for Modbus and power OUT www.zetaqlab.com Input power (direct): 12 Vdc, consumption max 3W Alimentazione (diretta): 12 Vdc, consumo max 3W CCT Control System Server Debug ON 5 6 7 8 9 10 Serial 2 Serial 3 Error Ethernet C IN1 IN2 IN3 IN4 C C IN5 IN6 IN7 IN8 C 1 2 3 4 5 6 GND A1 B1 GND A2 B2 www.zetaqlab.com Serial 1 CCT Sensor PSU 12Vdc SD www.zetaqlab.com CCT Sensor 4 www.zetaqlab.com 3 www.zetaqlab.com 2 Power CCT Sensor 1 SD - Vin + Modbus + power DALI or DMX WARNING / ATTENZIONE CCT-SENSOR have to be calibrated during startup by means of a colorimeter. CCT-SENSOR deve essere calibrato utilizzando un colorimetro in fase di startup. Hardware & Software Engineering Via E. Borgazzi 51, 20823 Lentate sul Seveso (MB) Italy www.zetaqlab.com CCT-SENSOR datasheet Rev. 23/01/2015 Specifications subject to change without notice 2