speed, simplicity, shaping
Transcript
speed, simplicity, shaping
SIAPI S.R.L. SIAPI AFRICA via Ferrovia Nord, 45 31020 San Vendemiano (TV) Italy tel. +39.0438.4096 fax +39.0438.401016 [email protected] Complexe Administratif et commercial “le Millenium” Route de la Marsa - Tunis - Tunisie tel. +216 71 854 294 / 71 854 295 fax +216 71 854 296 [email protected] SIAPI AMERICA INC SIAPI RUSSIA + CIS - Representative Office in Russian Federation 3190 Reps Miller Road, Suite 320 Norcross, GA, 30071 USA tel. 001.678.892.7200 tel. 001.877.834.5709 (toll free) tel. 001.678.892.7201 (fax) [email protected] 117292, Russia, Moscow, Dmitry Ulyanova Str. 16, build. 2, office 522 (entrance 8) tel. / fax +7 (499) 124-07-64 mobile +7 (916) 682-76-35 [email protected] Please note that some GPS might have the address listed as 3190 Reps Miller Court www.siapi.it speed, simplicity, shaping wide mouth / SW www.siapi.it wide mouth descrizione dell’applicazione La conversione di vasi e contenitori in VETRO, HDPE e METALLO verso il PET e il PP offre la possibilità di esplorare nuovi mercati con soluzioni di packaging altamente competitive ed innovative. Gli ambiti d’utilizzo sono molti, ad esempio: ALIMENTARE, FARMACEUTICO, CHIMICO, PITTURA/ VERNICI, GIOCATTOLI, CIBO PER ANIMALI, ALTRO. Dal 2004 SIAPI ha iniziato a sviluppare la tecnologia “Bocca Larga” lanciando sul mercato la serie di soffiatrici lineari SW ad 1-2-3-4 cavità per contenitori con imboccatura fino a 180 mm di diametro e 12 l di capacità. SIAPI può indirizzare il cliente nell’individuare un pacchetto completo che parte dalla fornitura della preforma per arrivare alla produzione del contenitore attraverso una fase preliminare di prototipazione per validare l’applicazione. La tecnologia SIAPI permette anche la produzione di contenitori dedicati al riempimento a caldo, utilizzando preforme sia in PET che in PP. description of application Converting GLASS, HDPE and METAL jars and containers to PET and PP makes it possible to explore new markets with highly competitive innovative packaging. Such containers can be used in many fi elds, such as: FOOD, PHARMACEUTICALS, CHEMICALS, PAINT/VARNISH, TOYS, PET FOOD, OTHERS. SIAPI has been working on “Wide Mouth” technology since 2004 and has launched on the market the SW series of linear blow-molding machines with 1-2-3-4 cavities for containers with mouth diameter up to 180 mm and a capacity of 12 litres. SIAPI can assist customers in fi nding a full package that includes preform supply and container production through a preliminary prototyping stage for application validation. SIAPI technology can also be used for producing hot fill containers in PET or PP. BLOW-MOLDING MACHINES AVAILABLE MAIN FEATURES Number of cavities Bottle capacity Max body diameter Max body height Max neck diameter Max nominal output 0,5 l Max nominal output 5 l Max nominal output 8 l Max nominal output 12 l Heating power Total installed power Length-width-height (mm) Weight Technological Options MAIN FEATURES Number of cavities Bottle capacity Max body diameter Max body height Max neck diameter Max nominal output 0,5 l Heating power Total installed power Length-width-height (mm) Weight Technological Options SW1* 1 12 l 260 mm 375 mm 63-180 mm 1200 bph** 1000 bph** 1000 bph** 800 bph** 50 Kw 60 Kw 2900-2120-2200 5500 Kg SW2* 2 8 l 220 mm 370 mm 63-180 mm 2400 bph** 2000 bph** 1400 bph** - 120 Kw 136 Kw 5500-2200-2500 6500 Kg SW3* 3 5 l 140 mm 370 mm 63-120 mm 3600 bph** 2700 bph** - - 120 Kw 136 Kw 5500-2200-2500 6500 Kg PH, HDMPRE, HDMPOS, ARSLP, ARSHP, SG, NO, HS, DB PH, HDMPOS, ARSLP, ARSHP, SG, HS, DB PH, HDMPOS, ARSLP, ARSHP, SG, HS, DB SW4* 4 2 l 100 mm 370 mm 53-90 mm 4800 bph** 120 Kw 136 Kw 5500-2200-2500 6500 Kg SW4-2* 4 or 3 or 2 - - - - - 120 Kw 136 Kw 5500-2200-2500 6500 Kg SW40 4 1,5 l 100 mm 200 mm 48-89 mm 4800 bph** 45 Kw 60 Kw 4500-2150-2600 4300 Kg PH, HDMPOS, ARSLP, ARSHP, SG, HS, DB PH, HDMPOS, ARSLP, ARSHP, SG, HS, DB PH, HDMPOS, ARSLP, ARSHP, SG, HS, DB * Up Side Down System. ** It depends on the preform design, preform thickness, bottle design and quality of PET resin. Technological Options Siapi SIAPI offre una soluzione a 360° che comprende: PSB Preform Stretch Booster HDMPRE HandleMatic During Blow Molding HDMPOS HandleMatic Post Blow Molding ARSLP Air Recovery System Low Pressure ARSHP Air Recovery System High Pressure (include ARSLP) SW1 PH Preferential Heating SG Super Grip NO Neck Orientation HS Heat Set DB Deep Bottom SW2 • sviluppo del disegno del contenitore • sviluppo del disegno della preforma • individuazione del produttore di preforme più vicino al sito produttivo del cliente • sviluppo della soluzione completa sia per il cold che per l’hot filling • realizzazione della soffiatrice e messa a punto del processo per ottimizzare la capacità produttiva • progettazione e realizzazione degli stampi di soffiaggio • assistenza tecnica programmata, straordinaria e fornitura di ricambi • fornitura di stampi ad iniezione e produzione di campioni di preforme attraverso partner qualificati length Le macchine soffiatrici SIAPI sono completamente elettriche, con motori brushless e tutte possono essere configurate con il sistema di recupero dell’aria di soffiaggio. • container design development • preform design development • identification of preform manufacturer nearest to customer’s production facilities • complete solution development for both cold and hot filling • manufacture of blow-molding machine and set-up to optimize production capacity • design and construction of blower molds • routine and extraordinary maintenance and provision of spare parts • provision of injection molds and production of sample preforms by qualified partners width width SIAPI offers a 360° solution including: SW40 length width SIAPI mold-blowing machines are fully electric with brushless motors, and they can all be configured with a blowing-air recovery system. length