smart 42 selv new - TCI professional led applications

Commenti

Transcript

smart 42 selv new - TCI professional led applications
NEW
Available
SMART 42
professional led applications
Direct current electronic drivers with DIP-SWITCH
Alimentatori elettronici in corrente continua con DIP-SWITCH
Made in Europe
(3)
SELV
Multipower LED drivers
Alimentatori LED multipotenza
2.1
SMART 42
Rated Voltage
Tensione Nominale
220 ÷ 240 V
Frequency
Frequenza
50...60 Hz
Article
Articolo
Code
Codice
P out
W
V out
DC
I out
DC
SMART 42(3)
122223
SMART 42 BI
122224
22
25
27
29
32
33
35
36
36
38
40
42
30...45
30...45
30...45
30...45
30...45
30...44
30...44
28...43
26...40
26...40
26...40
26...40
500 mA cost.
550 mA cost.
600 mA cost.
650 mA cost.
700 mA cost.
750 mA cost.
800 mA cost.
850 mA cost.
900 mA cost.
950 mA cost.
1000 mA cost.
1050 mA cost.
AC Operation range
Tensione di utilizzo AC
198 ÷ 264 V
DC Operation range
Tensione di utilizzo DC
198 ÷ 264 V
Power
Potenza
12 ÷ 42 W
Typical ripple at max
output current
Ondulazione tipica
alla massima corrente
uscita
± 20 %(1)
Reference Norms
Norme di riferimento:
EN 50172 (VDE 0108)
EN 55015
EN 61000-3-2
EN 61000-3-3
EN 61347-1
EN 61347-2-13
EN 61547
VDE 0710-T14
44
SMART 42 BI
n° LED V out
max.(1) max.
11/12
11/12
11/12
11/12
11/12
11/12
10/11
10/11
10/11
10/11
10/11
10/11
50
ta
°C
tc
°C
-25...+40(3) 70(3)
-25...+45 75
l max.
Power
Factor
0,95(2)
h max.
Efficiency(1)
> 90
Referred to Vin = 230 V, 100% load - Riferito a Vin = 230 V, carico 100%
Pout > 25 W
NEW - NOVITÀ
(1)
(2)
Features
•Multipower driver supplied with dip-switch for the selection of the output current.
•IP20 independent driver, for indoor use (SMART 42).
•Class I protection against electric shock for direct or indirect contact (SMART 42).
•Driver for built-in use (SMART 42 BI).
•It can be used for lighting equipment in protection class I
(SMART 42 BI).
•Active Power Factor Corrector.
•Analogical input (NTC) for thermal sensor connection.
•Current regulation ±5 % including temperature variations.
•Input and output terminal blocks on opposite sides
(wire cross-section up to 1,5 mm2 / AWG15).
•Clamping screws on primary and secondary circuits for cables with diameter: min. 2 mm - max. 9 mm (SMART 42).
•Driver can be secured with slot for screws.
•Protections:
- against overheating and short circuits;
- against mains voltage spikes;
- against overloads.
•Thermal protection = C.5.a.
www.tci.it
Caratteristiche
•Alimentatore multipotenza fornito di dip-switch per la selezione della corrente in uscita.
•Alimentatore indipendente IP20, per uso interno (SMART 42).
•Protetto in classe I contro le scosse elettriche per contatti
diretti e indiretti (SMART 42).
•Alimentatore da incorporare (SMART 42 BI).
•Utilizzabile per apparecchi di illuminazione in classe di
protezione I (SMART 42 BI).
•PFC attivo.
•Entrata analogica (NTC) per connessione sensore termico.
•Corrente regolata ±5 % incluse variazioni di temperatura.
•Morsetti di entrata e uscita contrapposti (sezione cavo fino a
1,5 mm2 / AWG15).
•Serracavo su primario e secondario per cavi di diametro:
min. 2 mm - max. 9 mm (SMART 42).
•Fissaggio dell’alimentatore tramite asole per viti.
•Protezioni:
- termica e cortocircuito; - contro le extra-tensioni di rete;
- contro i sovraccarichi.
•Protezione termica = C.5.a.
TCI professional LED applications
SMART 42
professional led applications
Direct current electronic drivers with DIP-SWITCH
Alimentatori elettronici in corrente continua con DIP-SWITCH
Made in Europe
Weight - Peso gr. 105 / 3,7 oz.
Pcs - Pezzi 40
Ø54
2,13’’
Weight - Peso gr. 98 / 3,7 oz.
Pcs - Pezzi 88
3,46’’
42
1,65’’
32
1,26’’
2.1
33,5
1,32’’
42,5
1,67’’
30
1,18’’
Multipower LED drivers
Alimentatori LED multipotenza
114
4,49’’
30
1,18’’
129,5
5,10’’
97
3,82’’
Wiring diagram - Schema di collegamento (Max. LED distance on page info8 - Massima distanza LED a pagina info8)
DIP-SWITCH
4
3
2
1
SEC
Vin
L
PRI
N
NTC
TCI professional LED applications
_
+
+
_
LED
THERMAL
SENSOR
www.tci.it
45

Documenti analoghi

MP 39 K2 SELV - TCI professional led applications

MP 39 K2 SELV - TCI professional led applications • Class II protection against electric shock for direct or indirect contact (MP 39 K2). • Driver for built-in use (MP 39 BI). • It can be used for lighting equipment in protection class I and I...

Dettagli

MWU SELV - TCI professional led applications

MWU SELV - TCI professional led applications EN 50172 (VDE0108) EN 55015 EN 60598-2-22 EN 61000-3-2 EN 61000-3-3 EN 61347-1 EN 61347-2-13 EN 61547 VDE 0710-T14

Dettagli

ATON 30/250-700 SELV NEW - TCI professional led applications

ATON 30/250-700 SELV NEW - TCI professional led applications Referred to Vin = 230 V, 100% load - Riferito a Vin = 230 V, carico 100% Pout > 12 W NEW - NOVITÀ

Dettagli

MAXI JOLLY SLIM HV DALI 60 SELV

MAXI JOLLY SLIM HV DALI 60 SELV • Active Power Factor Corrector. • Analogical input for thermal sensor connection. • Auxiliary output 12 V max. 100 mA. • Current regulation ±5 % including temperature variations. • Input and outpu...

Dettagli

sirio 150/200-700 - TCI professional led applications

sirio 150/200-700 - TCI professional led applications - against overloads. • Thermal protection = C.5.a. • Drivers with conformal coating option are available upon request (add CC after the code of article).

Dettagli

KU2 SELV - TCI professional led applications

KU2 SELV - TCI professional led applications Tensione di utilizzo DC 170 ÷ 280 V Power Potenza 0 ÷ 10 W

Dettagli