case history Irplast Tassoni
Transcript
case history Irplast Tassoni
Packagin Filling & Machinery & Development Irplast per Tonica Superfine Tassoni I rplast, uno dei principali operatori del settore packaging a livello europeo, è un’azienda italiana integrata verticalmente (dalla produzione di film in polipropilene biorientato, alla stampa delle etichette e dei nastri adesivi) da anni fornitore di fiducia dello storico marchio Tassoni. Per l’ultima nata in casa Tassoni, la Tonica Superfine - che si contraddistingue nel packaging per la caratteristica bottiglia in vetro ad effetto “corrugato” - Irplast ha previsto l’applicazione delle etichette Label Tape Shrink, termoretraibili preadesivizzate in bobina, senza supporto siliconato. Grazie all’elevata termoretrazione l’etichetta (l’etichettatrice Adhesleeve è di PE Labellers, partner di Irplast in numerosi progetti) aderisce perfettamente alla bottiglia: in questo modo rimane evidente la caratteristica lavorazione della bottiglia che altrimenti andrebbe persa con l’applicazione di una etichetta tradizionale. Infatti la retrazione è talmente perfetta che la bottiglia della tonica Tassoni mantiene al tatto la “rugosità” anche nella zona di applicazione dell’etichetta. La particolare trasparenza della label, inoltre, aiuta ad avere un effetto “no-label look” di forte appeal. La facilità di rimozione dell’etichetta, e l’assenza di residui di colla sulla bottiglia facilitano un’ottima riciclabilità dei materiali. Le Label Tape Shrink di Irplast sono ideali per sistemi e soluzioni di imballaggio per bevande, liquidi alimentari e detergenti, per applicazioni wrap-around (etichette rollfed). Economicità di gestione, alta produttività di applicazione, rispetto ambientale e sostenibilità, aspetti questi ultimi determinati dall’eliminazione della stazione colla a caldo nel processo di etichettatura (che consente un importante risparmio di colla ed energia) e dalla riduzione dei fumi e dei fermi per pulizia. Inoltre, tutte le miscele di adesivi vengono sviluppate secondo g GRAZIE ALL’ELEVATA TERMORETRAZIONE L’ETICHETTA ADERISCE PERFETTAMENTE ALLA BOTTIGLIA LASCIANDONE IN EVIDENZA LA CARATTERISTICA LAVORAZIONE rigidi criteri di eco-sostenibilità. La tecnologia di etichettatura preadesivizzata “linerless” si pone anche come valida alternativa all’impiego di shrink sleeve sui contenitori la cui forma richiede un grado medio-basso di termo retrazione. Infatti gli adesivi sono pienamente compatibili con il processo di termo retrazione dei film plastici e garantiscono la giusta tenacia. In fase di produzione delle etichette Label Tape Shrink l’adesivo è personalizzato e specifico per ogni necessità applicativa, per bottiglie standard in PET, per quelle in HDPE con superficie ruvida e per bottiglie in vetro (liscio e lavorato, come nel caso della Tonica Tassoni). La superficie adesiva è settoriale a registro. L’applicazione dell’adesivo in fase di produzione dell’etichetta si traduce nella possibilità di ottimizzare le quantità dello stesso in funzione dello specifico processo produttivo. Irplast sarà espositore a Ipack-Ima, Pad. 02 - stand D01 E10. Irplast and Tassoni Tonica Superfine THANKS TO HIGH SHRINKAGE CAPACITY, THE LABEL PERFECTLY ADHERES TO THE BOTTLE, THUS LETTING ITS CLASSIC SURFACE BE SEEN 116 I rplast, one of the major players in the European packaging sector, is a vertically integrated Italian company (from bi-oriented polypropylene film production, to label and adhesive tape printing), and for some years it has been a trusted partner of the historic soft-drink brand Tassoni. Irplast has agreed to apply pre-glued, heat- shrinkable & roll fed Label Tape Shrink labels without silicon backing liner, for Tassoni’s latest product, Tonica Superfine, whose packaging stands out for its classic corrugated glass bottle. Febbraio / February 2015 Thanks to the high shrink capability, the label (applied on the Adhesleeve labeler of PE Labellers, a longtime industrial partner of Irplast), perfectly adheres to the bottle: this way, the traditional bottle glass can be fully seen without any label to hide it. In fact, the shrinkage achieved is so flawless that even the bottle area of Tassoni tonic water where the label is applied is “rough” to the touch. The particular transparency offered by the label also gives a sort of “no-label look” of strong appeal to consumers. The materials can also be easily recycled thanks to easy removal of the label and zero glue residue on the bottle. Irplast Label Tape Shrink is ideal for packaging systems and solutions for beverages, edible liquids and detergents, and as an alternative for wraparound applications (roll-fed labels). Cost- efficiency, high speed application, respect for the environment and sustainability, are the features deriving from the elimination of the hot- glue station from the labelling process (which enables significant glue and energy savings), not to speak of the reductions in factoryfumes and stoppages for cleaning. In addition to this, adhesive mixes are also developed according to strict eco-sustainable criteria. “Linerless” pre-glued labelling technology is also a sound alternative to the use of shrink sleeves on containers whose shapes require low to medium shrinkage. In fact, the adhesives used are fully compatible with the heat shrink process of plastic films and help to achieve the perfect firm feel on the bottle. Label Tape Shrink labels have adhesives which are customized to application requirements, for PET standard bottles, HDPE bottles of rough surface and glass bottles (smooth and elaborated, as it is the case of Tonica Tassoni). The adhesives are applied to register during the label production process, with the unique possibility to optimize the quantity of glue used for the specific final product. Irplast will exhibit at Ipack-Ima – Hall 02 – Stand D01 E10. www.tecnalimentaria.it BEVERAGE INDUSTRY