file pdf - Dipartimento di Energia

Antonino Di Gerlando
ELENCO PUBBLICAZIONI E TITOLI
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
E. Tironi, A. Di Gerlando, I. Vistoli: “Energy Characteristics of Road Electric Drives”; International Conference
on Electrical Machines, Lausanne, Svizzera, 18-21 Settembre 1984, Conference Proceedings, Part 1, pp.197-200.
E. Campanari, A. Di Gerlando, E. Tironi: “Energetica del riscaldamento Joule in c.a. di barre cilindriche di
acciaio”; “L'Energia Elettrica”, N°4 v. LXII, 1985, pp.174-181.
A. Di Gerlando, E. Tironi, G. Ubezio: “Modulo di potenza di azionamento a transistori per veicolo elettrico ad
accumulatori”; Atti della Conferenza Drive Electric, Sorrento, Italia, 1-4 Ottobre 1985, Memoria 3.11.
A. Di Gerlando, R. Buccianti, P. Spada: “Applicabilità del metodo calorimetrico per la valutazione delle
prestazioni energetiche dei motori asincroni di bassa tensione”; Rivista “L'Energia Elettrica”, N° 5, vol. LXIII,
1986, pp.196-208.
E. Campanari, A. Di Gerlando, E. Tironi, I. Vistoli: “Tecniche di ottimizzazione della gestione dell'energia
elettrica in una rete metropolitana mediante modellistica per impianti innovativi e supervisione automatizzata di
impianti esistenti”; Convegno sull'Automazione nei Trasporti, Trieste, Italia, 28-30 Ottobre 1986, Vol.2.
A. Di Gerlando, E. Tironi: “Sviluppo modello matematico barra di conversione ed ottimizzazione della stessa”;
Seminario Generale delle Unità Operative del Piano Finalizzato Energetica, Pisa, Italia, 3-6 Novembre 1986; Atti
del Convegno, Tema UT.G - Trazione Elettrica Ferroviaria, pp.171-175.
A. Di Gerlando, E. Tironi, I. Vistoli: “Perdite in avvolgimenti di armatura alimentati da chopper”; Rivista
“L'Energia Elettrica”, N° 7-8, vol. LXIII, 1986, pp.281-290.
A. Di Gerlando, P. Zanotti: “A New Equipment for the Measurement of Torque and Speed of Rotating
Machines”; International Conference on Electrical Machines, Proceedings Part III, pagg.257-262, Pisa, Italia, 1214 Settembre 1988.
A. Di Gerlando, E. Tironi, I. Vistoli: “Indagini preliminari di un sistema distribuito di conversione c.a.-c.c.”;
Rivista “L'Energia Elettrica” N°4, 1989, pagg.155-163.
A. Di Gerlando, E. Tironi, D. Zaninelli: “Studio di fattibilità di un sistema di conversione c.a.-c.c. distribuito”;
Rivista “L'Energia Elettrica” N°5, 1989, pagg.243-250.
A. Di Gerlando, E. Tironi, I. Vistoli, D. Zaninelli: “A.C.- D.C. Distributed Conversion: Feasibility and first
Experiences”; International Symposium on “Electric Energy Conversion in Power Systems”, Capri, Italia,
Maggio 1989; Memoria F-T.1 .
A. Di Gerlando: “Doppi bipoli e quadripoli nelle reti a scala”; Rivista “L'Energia Elettrica”, N° 7-8, 1989,
pagg.331-338.
A. Di Gerlando, L. Dossi: “La magnetostrizione e sua applicabilità alla diagnostica di strutture in acciaio
magnetico.”; Rivista “L'Elettrotecnica” N°2, Febbraio 1988, Vol. LXXV, pp.145-156.
A. Di Gerlando, L. Dossi: “Magnetostrictive Excitation of Vibrations for a Structural Diagnostics”; International
Conference on Electrical Machines, Proceedings Part I, pagg.593-597, Pisa, Italia, 12-14 Settembre 1988.
L. Dossi, A. Di Gerlando: Verbale di deposito per brevetto di invenzione industriale dal titolo: “Eccitatore
torsionale perfezionato per prove non distruttive di diagnostica strutturale”; Domanda di brevetto N° 20885 A/87,
presentata il 12 Giugno 1987 all'Ufficio Provinciale Industria Commercio ed Artigianato di Milano.
A. Di Gerlando, E. Ecclesia: “Calculation of the Static Characteristic of a Hybrid Stepping Motor by means of an
Energetic Method”; International Conference on Electrical Machines, Proc. Part III, pagg.141-147, Pisa, Italia,
12-14 Settembre 1988.
A. Di Gerlando, I. Vistoli: “A Synthetic Method for the Efficiency Measurement of Three-Phase Induction
Motors”; International Conference on Electrical Machines, Proceedings Part III, pagg.880-887, Massachusetts
Institute of Technology, Cambridge, Massachussetts, U.S.A., 13-15 Agosto 1990.
A. Di Gerlando, M. Galasso: "Problematiche di alimentazione nei sistemi Maglev"; Atti del Workshop su
Azionamenti Elettrici con Motori Lineari; Milano, Italia, 13-14 Aprile 1992, Memoria N°4, pp.1-30.
A. Di Gerlando, I. Vistoli: “Special Transformers for the Measurement of Harmonic Noise of D.C. Currents”;
Speedam Conference - Symposium on Power Electronics, Electrical Drives, Advanced Electrical Motors,
Positano, Italia, 19-21 Maggio 1992, pp.209-214.
A. Di Gerlando, I. Vistoli: “Une méthode synthétique pour la modélisation des moteurs pas a pas hybrides dans le
but du projet”; 7ème Colloque International sur les Moteurs Pas a Pas, Nancy, Francia, 1-3 Luglio 1992, pp.1320.
A. Di Gerlando, G. Colombo: “Use of Energetic Methods for the Optimized Design of Hybrid Stepping Motors”;
International Conference on Electrical Machines, ICEM Proceedings Part 2, Manchester, Gran Bretagna, 15-17
Settembre 1992, pp.503-507.
22.
A. Di Gerlando, I. Vistoli: “D.C. Polarized Current Transformers for the Measurement of Harmonic Noise:
Design and Modelling Methodologies”; IEEE-ICHPS V Conference - 5th International Conference on Harmonics
in Power Systems, Atlanta, Georgia (USA), 22-25 Settembre 1992, pp.323-329.
23a. A. Di Gerlando, I. Vistoli: “D.C. Polarized Current Transformers for the Measurement of Harmonic Noise:
Numerical and Experimental Analysis”; IEEE-ICHPS V Conference - 5th International Conference on Harmonics
in Power Systems, Atlanta, Georgia (USA), 22-25 Settembre 1992, pp.316-322.
23b. A. Di Gerlando, I. Vistoli: “D.C. Polarized Current Transformers for the Measurement of Harmonic Noise”;
Rivista “Electric Machines and Power Systems”, Syed A. Nasar Editor, c/o University of Kentucky (USA),
Vol.24, N°7, Ottobre-Novembre 1996.
24. A. Di Gerlando, D. Zaninelli: “Harmonic Analysis in A.C.-D.C. Distributed Conversion Systems”; IEEE-ICHPS
V Conference - 5th International Conference on Harmonics in Power Systems, Atlanta, Georgia, (USA), 22-25
Settembre 1992, pp.121-127.
25. A. Di Gerlando, M. Galasso, I. Vistoli: “Comparative Analysis of EDS and EMS Maglev Systems”; Maglev '93,
13th Int. Conf. On Magnetically Levitated Systems and Linear Drives; Argonne National Labor., Illin., (USA),
19-21 Maggio 1993, pp336-341.
26. A. Di Gerlando, I. Vistoli: “Design Problems of Linear On Board Generators in EMS Maglev Transportation
Systems”; Maglev '93, 13th International Conference On Magnetically Levitated Systems and Linear Drives;
Argonne National Laboratory, Argonne, Illinois (USA), 19-21 Maggio 1993, pp.342-347.
27. A. Di Gerlando, I. Vistoli: “A New Method for the Synthetic Determination of the Losses of Three-Phase
Induction Motors”; Rivista “Electric Machines & Power Systems”, Nasar Ed., Univ. of Kentucky (USA);
Vol.21,N°3, 1993, pp.371-392.
28. A. Di Gerlando, I. Vistoli: “Computational Strategies for Design Oriented Stepping Motor Modelling”; IMACSTC1 '93 Conference, Computational Aspects of Electromechanical Energy Converters and Drives, Ecole
Polytechnique de Montréal, Canada, 7-9 Luglio 1993, pp.619-624.
29. A. Di Gerlando, I. Vistoli: “Improved Thermal Modelling of Induction Motors for Design Purposes”; Conference
EMD '93 - 6th Intern. Conference on Electrical Machines and Drives, Oxford University, UK, 8-10 Settembre
1993, pp.381-386.
30. A. Di Gerlando: “Design Characterization of Active Magnetic Bearings for Rotating Machines”; ICEMA
Conference - International Conference on Electrical Machines in Australia, Adelaide, Australia, 14-16 Settembre
1993, Proc. Vol.3, pp.606-611.
31. A. Di Gerlando, I. Vistoli: “Analisi di progetto di generatori lineari di bordo per veicoli Maglev di tipo EMS”;
Atti del 1° Convegno Nazionale Progetto Finalizzato Trasporti 2 del CNR, Roma, Italia, 19-21 Ottobre 1993,
Vol.3, pp.1489-1508.
32.
A. Di Gerlando, R. Perini, I. Vistoli: “Operation Analysis of Controlled Rectifying Bridges fed by Wind Driven
Self Excited Inductions Generators”; Speedam'94 Conference - Symposium on Power Electronics, Electrical
Drives, Advanced Electrical Motors; Taormina, Italia, 8-10 Giugno 1994, pp.459-464.
33.
A. Di Gerlando: “Modelling for the Optimized Design of Active Magnetic Bearings and Dampers”; ICEM'94,
International Conference on Electrical Machines, Parigi, Francia, 5-8 Settembre 1994, pp.40-45.
34.
A. Di Gerlando, I. Vistoli: “Thermal Networks of Induction Motors for Steady State and Transient Operation
Analysis”; ICEM'94, International Conference on Electrical Machines, Parigi, Francia, 5-8 Settembre 1994,
pp.452-457.
35.
A. Di Gerlando, R. Perini, I. Vistoli: “Evaluation of No-Load Voltage Harmonics of Salient-Pole A.C.
Generators: Analytical-Numerical Methodologies”; IEEE-ICHPS VI Conference - 6th International Conference
on Harmonics in Power Systems, Bologna, Italia, 21-23 Settembre 1994, pp.104-110.
36.
A. Di Gerlando, R. Perini, I. Vistoli: “Analytical Modelling of the Field at the Air-Gap of Salient-Pole A.C.
Generators for the Estimation of the No-Load Voltage Harmonics”; IEEE-ICHPS VI Conference, 6th
International Conference on Harmonics in Power Systems, Bologna, Italia, 21-23 Settembre 1994, pp.97-103.
37.
A. Di Gerlando: “Tipologie ed applicazioni di cuscinetti elettromagnetici per organi rotanti”; Rivista
“Automazione, Energia, Informazione”, Vol. 82, N°2, Febbraio 1995, pagg.138-145.
38.
A. Di Gerlando: “Design Modelling and Performance Analysis of Active Magnetic Bearings with Distributed
Windings”; Stockholm Power Tech Conference, IEEE International Symposium on Electric Power Engineering,
Stoccolma, Svezia, 18-22 Giugno 1995, Vol. Electrical Machines and Drives, pagg. 322-327.
39.
F. Castelli Dezza, A. Di Gerlando, R. Perini: “Performance Comparison among Different Converters Fed by Self
Excited Wind Driven Induction Generators”; Conference “Electric Machines and Drives 95”, Durham, UK, 1113 Sett. 1995; pp.438-443.
40.
A. Di Gerlando, R. Perini, I. Vistoli: “A Field-Circuit Approach to the Design Oriented Evaluation of the NoLoad Voltage Harmonics of Salient Pole Synchronous Generators”; Conference “Electric Machines and Drives
41.
42.
43.
44.
45.
46.
47.
48.
49a.
49b.
50.
51.
52.
53.
54.
55.
56.
57.
95”, Durham, Gran Bretagna, 11-13 Settembre 1995; pp.390-394.
F. Castelli Dezza, A. Di Gerlando, R. Perini, I. Vistoli: “Efficiency and Safety Features of Autonomous Wind
Energy Conversion-Storage Systems Using Self Excited Induction Generators”; III International Congress on
Energy, Environment and Technological Innovations, Caracas, Venezuela, Novembre 1995.
A. Di Gerlando, S. Fortuna, I. Vistoli: “Armature Current Unbalance Detection using On-board Probe Windings
for the Stator On-line Diagnostics of EMS Maglev Systems”, International Conference on Magnetically
Levitated Systems (Maglev), Brema, Germania, 27-29 Novembre 1995.
F. Castelli Dezza, A. Di Gerlando, R. Perini: “Conversion Systems Using Wind-Driven Induction Generators
with Electronically Controlled Reactive and Active Powers - Part I: Design Modelling”, Speedam,
Symposium on Power Electronics Industrial Drives Power Quality Traction Systems, Capri, Italia, 5-7/6/96.
F. Castelli Dezza, A. Di Gerlando, R. Perini: “Conversion Systems Using Wind-Driven Induction Generators
with Electronically Controlled Reactive and Active Powers - Part II: Dynamical Analysis”, Speedam,
Symposium on Power Electronics Industrial Drives Power Quality Traction Systems, Capri, Italia, 5-7 Giugno
1996.
A. Di Gerlando, R. Perini, I. Vistoli, G. Bosi: “Design and Operation Improvements of Inverter Fed Adjustable
Speed Induction Motors for Pumping Applications”, Proceedings del Congresso ICEM'96, International
Conference on Electrical Machines, Vigo, Spagna, 10-12 Settembre 1996.
A. Di Gerlando, S. Fortuna: “Design and Experimental Analysis of On-Board Probe Windings for the Stator OnLine Diagnostics of EMS Maglev Systems”, ICEM'96 Proceedings, Intern. Conf. on Electrical Machines, Vigo,
Spagna, 10-12 Sept. 1996.
A. Di Gerlando, S. Fortuna, I Vistoli: “Design Oriented Analytical Modelling of Linear Synchronous On-Board
Generators for EMS Maglev Systems”; Electrimacs 96, 5th International Conference Organized by the Technical
Committe N°1 of the International Association for Mathematics and Computers in Simulation, Saint Nazaire,
France, 17-19 Settembre 1996, pp.793-800.
A. Di Gerlando, R. Perini, I. Vistoli: “Design and Experimental Investigation of the Voltage Distortion of
Salient-Pole Synchronous Generators”, IEEE-ICHQP VII Conference, 7th International Conference on
Harmonics and Quality of Power, Las Vegas, NV (USA), Ottobre 16-18, 1996, pp.392-399.
A. Di Gerlando, Perini: “Evaluation of the Effects of the Voltage Harmonics on the Extra Iron Losses in the
Inverter fed Electromagnetic Devices”, IEEE-ICHQP VII Conference, 7th International Conference on
Harmonics and Quality of Power, Las Vegas, NV (USA), Ottobre 16-18, 1996, pp.448-455.
A. Di Gerlando, Perini: “Evaluation of the Effects of the Voltage Harmonics on the Extra Iron Losses in the
Inverter fed Electromagnetic Devices”, IEEE Transactions on Energy Conversion, Vol.14, N°1, March 1999.
A. Di Gerlando, S. Fortuna, I. Vistoli: “Studio di avvolgimenti indotti di bordo per la generazione e la
diagnostica nei sistemi di trasporto Maglev di tipo EMS con motori sincroni lineari a statore lungo.”, 2°
Workshop Nazionale su Azionamenti Elettrici con Motori Lineari, Pisa Domus Galilæana, 17 Dic. 1996, pp.89108.
F. Castelli Dezza, A. Di Gerlando, R. Perini: “Modelling and Experimental Investigation of Energy Conversion
Systems Employing Wind-Driven Induction Generators with Electronically Controlled Self-Excitation and
Power Output”, EPE’97 7th European Conference on Power Electronics and Applications, 8-10 Sept. ‘97,
Trondheim, Norway.
F. Castelli Dezza, A. Di Gerlando, S. Fortuna: “Analisi progettuale e sperimentale di sistemi Maglev di tipo
EMS con apparati di eccitazione-levitazione elettromagnetici e ibridi.”, III Convegno Nazionale del Progetto
Finalizzato Trasporti 2 del CNR, 10-12 Novembre 1997, Taormina.
F. Castelli Dezza, A. Di Gerlando, I. Vistoli: “Modelling and Experimental Approach to the Design of EMS
Maglev Systems with Electromagnetic and Hybrid Levitation Devices. Proceedings of the World Congress on
Railway Research, WCRR’97, Firenze, 16-19 Novembre 1997.
F. Castelli Dezza, A. Di Gerlando, I. Vistoli: “Sizing and performance comparative analysis of field-levitation
devices for EMS Maglev transportation systems”; MAGLEV ‘98, 15th International Conference On Magnetically
Levitated Systems And Linear Drives 12th-15th April, 1998, Mt. Fuji, Japan.
A. Di Gerlando, R. Perini, I. Vistoli: “Modelling and Design Aspects of Inverter Fed Solid Rotor Submersible
Induction Motors for Pumping Drives”; ICEM’98, International Conference on Electrical Machines, Vol.3/3,
Istanbul, Turkey, 2nd - 4th September 1998.
A. Di Gerlando, I. Vistoli: “Distortion Problems And Design Solutions Of Converter Fed Single-Phase
Permanent Magnet Motors For Small Power Applications”; ICHQP VIII, International Conference on
Harmonics and Quality of Power, Vol.2/2, Athens, Greece, 14th -16th October 1998.
A. Di Gerlando, D. Zaninelli: “Criteria for Designing a 100 MVA Statcom”; 1st European Workshop on Custom
Power Technologies, Barcellona, Spagna, 22-23 March 1999.
58.
A. Marioni, M. Battaini, G. Del Carlo, F. Casciati, A. Di Gerlando, R. Perini, A. Silvestri, M. Ubaldini:
“Development and Application of Electro-Inductive Dissipators”: International Post-SmiRT Conference Seminar
on Seismic Isolation, Passive Energy Dissipation and Active Control of Vibrations of Structures, Cheju, Korea,
August 23-25, 1999, pp.347-354.
59.
A. Di Gerlando, G. M. Foglia: “Improved Analytical Evaluation of Air-Gap Fluxes and Forces of Ferromagnetic
Smoothed and Toothed Structures and Pole Shoes”, Proceedings of the International Symposium on
Electromagnetic Fields in Electrical Engineering, ISEF ’99, September 23-25, 1999, Pavia, Italy, pp.224-227.
59.b
A. Di Gerlando, G. M. Foglia: “Improved Analytical Evaluation of Air-Gap Fluxes and Forces of Ferromagnetic
Smoothed and Toothed Structures and Pole Shoes”, COMPEL, The International Journal for Computation and
Mathematics in Electrical and Electronic Engineering, V. 19, N° 2, 2000, MCB University Press, p.438-445
60.
F. Castelli Dezza, A. Di Gerlando, G. M. Foglia: “Field-Circuit Integrated Methodologies for Design and
Modelling of Permanent Magnet Levitation Devices for Maglev Transportation Systems”, Proceedings of the
International Symposium on Electromagnetic Fields in Electrical Engineering, ISEF ’99, September 23-25,
1999, Pavia, Italy, pp.433-436.
60.b
F. Castelli Dezza, A. Di Gerlando, G. M. Foglia: “Field-Circuit Integrated Methodologies for Design and
Modelling of Permanent Magnet Levitation Devices for Maglev Transportation Systems”, COMPEL, The
International Journal for Computation and Mathematics in Electrical and Electronic Engineering, Vol.19, N° 2,
2000, MCB University Press, p.698-705
61.
M. Andriollo, A. Di Gerlando: “Guide lineari di tipo elettromagnetico: Principi di funzionamento ed
applicazioni”, Giornata di studio Le guide Lineari: tipi e caratteristiche di impiego, organizzata da Associazione
Italiana Progettisti Industriali c/o FAST, Milano 27 settembre 1999, pagg.30.
61.b
M. Andriollo, A. Di Gerlando: “Guide lineari di tipo elettromagnetico: Principi di funzionamento ed
applicazioni”, lavoro [61] ripubblicato, diviso in tre parti, nella Rivista Italiana “Componenti Industriali”,
Numeri 46-Dic.1999, 47-Feb.2000 e 48-Mar. 2000.
62.
A. Di Gerlando, I. Vistoli: “Indagini teoriche e sperimentali sui sistemi di trasporto Maglev”, 4° Convegno
Nazionale del PFT2 del CNR, Roma, 3-5 Nov. 1999, pagg.17.
63.
F. Castelli Dezza, A. Di Gerlando, G.M. Foglia: “Theoretical Studies and Experimental Activities on EMS
Levitation Devices for Maglev Transportation Systems”, Congresso Internazionale Maglev 2000, Rio de Janeiro,
Brasile, 7-10 Giugno 2000; pagg.213-218
64.
A. Di Gerlando, R. Perini: “Energy saving improved evaluation of inverter upgrade in submersible pump induction
motor drives”, Congresso Internazionale Speedam 2000, Ischia, Italia, 13-16 Giugno 2000; pagg.C3.1-C3.6
65.
A. Di Gerlando: “ Modelling and design analysis of small rating single-phase permanent magnet motors”,
Congresso Internazionale Speedam 2000, Ischia, Italia, 13-16 Giugno 2000; pagg.C2.19-C2.24
66.
A. Di Gerlando, R. Perini: “Analytical evaluation of the stator winding temperature field of water-cooled
induction motors for pumping drives”, Int. Conf. ICEM 2000, Espoo, Finlandia, 28-30/08/00; pagg.130-134.
67.
A. Di Gerlando, R. Perini, A. Silvestri, M. Ubaldini: “Design criteria and performance analysis of passive
permanent magnet electro-inductive devices for seismic vibrations damping”, Congresso Internazionale ICEM
2000, Espoo, Finlandia, 28-30 agosto 2000; pagg. 582-586
68.
A. Di Gerlando, R. Perini: “A Field - Circuit Approach to the Thermal Model of Water Cooled Induction
Motors”; Proceedings of The 4th International Symposium on Advanced Electromechanical Motion Systems Electromotion ’01; June 19-20, 2001; Bologna, Italy; pp.47-52.
69.
M. Andriollo, A. Di Gerlando, D. Porzio: “A Design Oriented Magnetic Circuit Model of Low-Power
Synchronous Generators”; Proceedings of the 4th International Symposium on Advanced Electromechanical
Motion Systems - Electromotion ’01; June 19-20, 2001; Bologna, Italy; pp.535-540.
70.
A. Di Gerlando, R. Perini: “A Model for the Operation Analysis of High Speed Universal Motors with Triac
Regulated Mains Voltage Supply”; Proceedings of The International Conference SPEEDAM 2002: Symposium
on Power Electronics, Electrical Drives, Automation And Motion: Ravello, Italy, June 11-14, 2002
71.
A. Di Gerlando, M. Ubaldini: Verbale di Deposito di Domanda di Brevetto di Invenzione Industriale dal titolo
“Macchina elettrica sincrona a bobine concentrate”, presentata alla Camera di Commercio Industria Artigianato
e Agricoltura di Milano il 31/05/2002; Domanda N° MI2002A 001186.
71.b
A. Di Gerlando, M. Ubaldini: European Patent EP 1514340: “Synchronous Electrical Concentrated Coil
Machine”, date of publication: 09 August 2006.
72.
A. Di Gerlando, R. Perini: “Modelling and Experimental Analysis of Core Saturation and Losses of Universal
Motors”; Intern. Conf. on Electrical Machines - ICEM 2002; Brugge, Belgium, 25-28 August 2002; Conf.
Record on CD: Paper N° 090
73.
M. Andriollo, T. Bertoncelli, A. Di Gerlando: “ A Magnetic Network Approach to the Transient Analysis of
Synchronous Machines”; Intern. Conf. on Electrical Machines - ICEM 2002; Brugge, Belgium, 25-28 August
2002; Conference Record On CD: Paper N° 354
73.b
M. Andriollo, T. Bertoncelli, A. Di Gerlando: “ A Magnetic Network Approach to the Transient Analysis of
Synchronous Machines”; Compel, The International Journal for Computation and Mathematics in Electrical and
Electronic Engineering, Vol.22, N°4, 2003, pp.953-968.
74.
F. Castelli Dezza, A. Di Gerlando, G.M. Foglia: “Improved Magnetic Modelling of EMS Maglev Levitators”;
International Conference on Magnetically Levitated Systems and Linear Drives – Maglev 2002, Lausanne,
Switzerland, September 3-5, 2002, Conference Record on CD – Paper N° 08101
75.
F. Castelli Dezza, A. Di Gerlando, G.M. Foglia: “Design of Scaled Prototypes of EMS Maglev Levitators, based
on an Improved Magnetic Modelling”; International Conference on Magnetically Levitated Systems and Linear
Drives – Maglev 2002, Lausanne, Switzerland, Sept. 3-5, 2002, Conf. Record on CD – Paper N° 08102
76.
N. Bianchi, A. Boglietti, A. Di Gerlando, M. Villani: “Motors and Drives Energy Efficiency Increase in
Industrial and Civil Applications: the Research Approach by a Pool of Italian Universities”, 3rd International
Conference on Energy Efficiency in Motor Driven Systems EEMODS 02, Treviso, Italy, 18-20 Sept. 2002.
77.
A. Di Gerlando, R. Perini: “Model of the Commutation Phenomena in a Universal Motor”, International Electric
Machines and Drives Conference, IEMDC 2003, Conference Record on CD, Paper N° 10076, Madison,
Wisconsin, USA, June 1-4, 2003.
78.
A. Di Gerlando, R. Perini, M. Ubaldini: “Permanent Magnet Linear Actuators with Concentrated Coils”, 4th
International Symposium on Linear Drives for Industry Applications, LDIA 2003, Birmingham, UK, 8-10
September 2003, pp.371-374.
79.
A. Di Gerlando, G. M. Foglia, R. Perini: “Analytical Model of Air-Gap Magnetic Field in Doubly Slotted
Electrical Machines with Distributed Windings, XI International Symposium on Electromagnetic Fields in
Electrical Engineering, ISEF 2003, Maribor, Slovenia, 18-20 September 2003, pp.67-72.
80.
A. Di Gerlando, G. M. Foglia, R. Perini: “Analytical Computation of the Electromagnetic Torque in Doubly
Slotted Synchronous Machines with Distributed Windings, XI International Symposium on Electromagnetic
Fields in Electrical Engineering, ISEF 2003, Maribor, Slovenia, 18-20 September 2003, pp.399-404.
81.
A. Di Gerlando, G. M. Foglia, R. Perini: “Analytical Evaluation of Electromotive Forces in Doubly Slotted
Synchronous Machines with Distributed Windings, XI International Symposium on Electromagnetic Fields in
Electrical Engineering, ISEF 2003, Maribor, Slovenia, 18-20 September 2003, pp.405-410.
82.
A. Di Gerlando, G. Esposito, R. Perini, A. Silvestri, M. Ubaldini: “Dispositivi Antisismici Elettroinduttivi”, AEI,
Rivista ufficiale dell’Associazione Elettrotecnica ed Elettronica Italiana, Vol.90, Ottobre 2003, pp.49-59.
83.
A. Di Gerlando, R. Perini, G. Rapi: “Equivalent Circuit for the Performance Analysis of Universal Motors”,
IEEE Transactions on Energy Conversion, Vol.19, N.1, March 2004, pp.18-27.
84.
A. Di Gerlando: “Caratterizzazione energetica di motori elettrici di piccola potenza per applicazioni ad alta
velocità”, Workshop AC Motor Drives Technology, Sala Convegni della Fiera di Vicenza, 7 Maggio 2004, pp.11.
85.
A. Di Gerlando, R. Perini, L. Madonini: “Brush Wear Modelling in High Speed Universal Motors”, Speedam
2004, Proceedings of the International Symposium on Power Electronics, Electrical Drives, Automation, Motion,
Palazzo dei Congressi - Capri, Italy, June 16-18, 2004, ISBN 88-89389-00-1
86.
A. Di Gerlando, R. Perini, M. Ubaldini: “Axial Flux, Field Regulated PM Synchronous Generators with
Concentrated Armature Windings”, Speedam 2004, Proceedings of the International Symposium on Power
Electronics, Electrical Drives, Automation, Motion, Palazzo dei Congressi - Capri, Italy, June 16-18, 2004,
ISBN 88-89389-00-1.
87.
A. Di Gerlando, M. Ubaldini: “Nuovo motore elettrico sviluppato dal Politecnico di Milano”, Rivista Via Mare
(By Sea), in italiano e in inglese, N° 3, vol.4, maggio-giugno 2004, pp.31-32.
88.
A. Di Gerlando, R. Perini: “Low-Cost Redesign Criteria for the Efficiency Improvement of Universal Motors
used in Domestic Appliances”, Proceedings of the 3rd International Conference on Energy Efficiency in
Domestic Appliances and Lighting, 1-3 October 2003, Torino, Italy, ISBN 88-901329-0-6.
89.
A. Di Gerlando, R. Perini: “Efficiency Improvement of Universal Motors Used in Domestic Appliances”,
Proceedings of ICEM04, International Conference on Electrical Machines, Cracow, Poland, 5-8 September
2004, Conf. Record on CD: Paper N° 174, ISBN 83-921428-0-2
90.
A. Di Gerlando, R. Perini, M. Ubaldini: “High Pole Number, PM Synchronous Motor with Concentrated Coil
Armature Windings”, Proceedings of ICEM04, International Conference on Electrical Machines, Cracow,
Poland, 5-8 September 2004, Conf. Record on CD: Paper N° 58, ISBN 83-921428-0-2
90.b A. Di Gerlando, R. Perini, M. Ubaldini: “High Pole Number, PM Synchronous Motor with Concentrated Coil
Armature Windings”, Book “Recent Developments of Electrical Drives”, Best Papers from ICEM04
International Conference on Electrical Machines; Springer, 2006, pp. 307-320, ISBN-10 1-4020-4534-4.
91.
F. Castelli Dezza, A. Di Gerlando, G.M. Foglia, R. Perini: “Analytical Evaluation of the Electromotive Forces in
Synchronous Linear Electrical Machines”, Proc. of Maglev’04, the 18th Intern. Conf. on Magnetically Levitated
Systems and Linear Drives, Shanghai, China, 26-28th Oct. 2004, Conf. Record on CD: Paper N° 7-10
92.
F. Castelli Dezza, A. Di Gerlando, G.M. Foglia, R. Perini: “Analytical Computation of the Electromagnetic
Forces in Synchronous Linear Electrical Machines”, Proc. of Maglev’04, the 18th Intern. Conf. on Magnetically
Levitated Systems and Linear Drives, Shanghai, China, 26-28th Oct. 2004, Conf. Record on CD: Paper N° 7-9.
93.
M. Andriollo, A. Di Gerlando, M. Ubaldini: “Attuatori lineari per applicazioni industriali: tipologie,
disposizioni, caratteristiche. Aspetti innovativi di attuatori a magneti permanenti con avvolgimenti concentrati.”,
Atti della Giornata di Studio Anipla “Motori lineari: caratteristiche costruttive e applicazioni in ambito
industriale”, Cinisello Balsamo (MI), Italia, c/o Sede Ucimu, 18 novembre 2004, Atti su CD: memoria n° 1.
94.
A. Di Gerlando, G. Foglia, R. Perini: “Analytical Model of The Magnetic Field in Doubly Slotted Electrical
Machines With Distributed Windings and Evaluation of E.M.F. and Torque”, Post Conference Book of ISEF
2003 – 11th International Symposium On Electromagnetic Fields in Electrical Engineering, Maribor, Slovenia,
September 18-20 2003: Sławomir Wiak, Andrzej Krawczyk, Mładen Trlep Editors, Computer Engineering in
Applied Electromagnetism, © 2005 Springer, Printed In Great Britain, ISBN 1-4020-3168-8, pp.129-136.
95.
A. Di Gerlando, G.M. Foglia, R. Perini, M. Ubaldini: “Design and Operation Aspects of Field Regulated PM
Synchronous Machines with Concentrated Armature Windings”, Proceedings of IEMDC 05, International
Electric Machines and Drives Conference, S. Antonio, Texas, USA, May 15-18 2005, Conference Record on
CD: Paper N° 10247; ISBN: 0-7803-8988-3.
96.
A. Di Gerlando, R. Perini: “Modelling and Test Validation of High Speed Universal Motors Fed via a Triac”,
Proceedings of IEMDC 05, International Electric Machines and Drives Conference, S. Antonio, Texas, USA,
May 15-18 2005, Conference Record on CD: Paper N° 10257; ISBN: 0-7803-8988-3.
97.
A. Di Gerlando, G. Foglia, R. Perini: “Analytical Calculation of the Air-Gap Magnetic Field in Salient-Pole
Three-Phase Synchronous Machines with Open Slots”, ISEF 2005 - XII International Symposium on
Electromagnetic Fields in Mechatronics, Electrical and Electronic Engineering, Baiona, Spain, September 1517, 2005, Proceedings on CD, ISBN N° 84 – 609 – 7057 – 4, paper EE-3.14.
97.b A. Di Gerlando, G. Foglia, R. Perini: “Analytical Calculation Of The Air-Gap Magnetic Field In Salient-Pole
Three-Phase Synchronous Machines With Open Slots”; Electromagnetic Fields In Mechatronics, Electrical and
Electronic Engineering, A. Krawczyk et al. (Eds.), IOS Press, 2006, Vol. 27, pp. 312-318; ISBN 1-58603-627-0.
98.
A. Di Gerlando, G. Foglia, R. Perini: “Calculation of Self and Mutual Inductances in Salient-Pole, Three-Phase
Synchronous Machines with Open Slots”, ISEF 2005 - XII International Symposium on Electromagnetic Fields
in Mechatronics, Electrical and Electronic Engineering, Baiona, Spain, September 15-17, 2005, Proceedings on
CD, ISBN N° 84 – 609 – 7057 – 4, paper EE-3.15.
99.
A. Di Gerlando, G. Foglia, R. Perini: “E.M.F. and Torque Analytical Calculation in Salient-Pole, Three-Phase
Synchronous Machines with Open Slots”, ISEF 2005 - XII International Symposium on Electromagnetic Fields
in Mechatronics, Electrical and Electronic Engineering, Baiona, Spain, September 15-17, 2005, Proceedings on
CD, ISBN N° 84 – 609 – 7057 – 4, paper EE-3.16.
100.
A. Di Gerlando, R. Perini: “Model of the Commutation Phenomena in a Universal Motor”, IEEE Transactions
on Energy Conversion, Vol.21, N.1, March 2006, pp.27-33, ISSN: 0885-8969.
101.
G.M. Foglia, P. Calzoni, F. Castelli Dezza, A. Di Gerlando, “Control system and experimental results on a PM
maglev test bed”, in Proceedings of MAGLEV’2006, Dresden, Germany, September 13-15, 2006, Paper N° 31.
102.
A. Di Gerlando, R. Perini “Model to Evaluate the Influence of the Winding Data on the Brush Wear in Universal
Motors”, in Proceedings of ICEM 2006, XVII International Conference on Electrical Machines, September 2-5,
2006, Chania, Crete Island, Greece, Conference Paper N° 207.
103.
A. Di Gerlando, G. M. Foglia, R. Perini, M. Ubaldini, “Electromagnetic Design Analysis of Tooth Coil, Voltage
Regulated, PM Synchronous Generators”, in Proceedings of ICEM 2006, XVII International Conference on
Electrical Machines, September 2-5, 2006, Chania, Crete Island, Greece, Conference Paper N° 235.
104.
A. Di Gerlando, G. M. Foglia, R. Perini, M. Ubaldini, “Cooling and Thermal Modelling Aspects of Tooth Coil,
Permanent Magnet Synchronous Machines”, in Proceedings of ICEM 2006, XVII International Conference on
Electrical Machines, September 2-5, 2006, Chania, Crete Island, Greece, Conference Paper N° 236.
105.
A. Di Gerlando, G. M. Foglia, R. Perini, M. Ubaldini, “Steady State Equivalent Model of PM Generators
Feeding Capacitor Loaded Diode Bridges, for Wind Energy Generation”, in Proceedings of ICEM 2006, XVII
International Conference on Electrical Machines, September 2-5, 2006, Chania, Crete Island, Greece,
Conference Paper N° 242.
106.
A. Di Gerlando, G. M. Foglia, R. Perini: “Electromagnetic and Thermal Aspects of Special PM Generators for
Short Term, Controlled Damping of Mechanical Oscillations”; Proc. of IECON06, IEEE Industrial Electronics
Soc. 32nd Annual Conf.; Paris, France; Nov. 7-10, 2006; IEEE Catalog N°: 06CH37763C; ISBN: 1-4244-0136-4;
Library of Congress: 1553-572X; Conf. Record. on Cd: Paper N° PF-005282, pp.4859-4864
107.
A. Di Gerlando, G. Foglia, R. Perini: “FEM Identification of D-Q Saturation Functions in Salient-Pole
Synchronous Machines”, ISEF 2007 - XIII Intern. Symposium on Electromagnetic Fields in Mechatronics,
Electrical and Electronic Engineering, Prague, Czech Republic, Sept. 13-15, 2007, Proc. on CD-Rom, ISBN
978-80-01-03784-3, Paper N° 85
108.
A. Di Gerlando, G. Foglia, R. Perini: “Analytical Model of the Air-Gap Magnetic Field in Synchronous
Machines Considering Slotting, Saliency and Saturation Effects”, ISEF 2007 - XIII Intern. Symposium on
Electromagnetic Fields in Mechatronics, Electrical and Electronic Engineering, Prague, Czech Republic, Sept.
13-15, 2007, Proc. on CD-Rom, ISBN 978-80-01-03784-3, Paper N° 87
108b. A. Di Gerlando, G. Foglia, R. Perini: “Analytical Evaluation of Flux-Linkages and Electromotive Forces in
Synchronous Machines Considering Slotting, Saliency and Saturation Effects”; Advanced Computer Techniques
in Applied Electromagnetics; S. Wiak et al. Ed.s, Series “Studies in Applied Electromagnetics and Mechanics”
IOS Press, 2008, Vol. 30, ISBN 978-1-58603-895-3, pp. 192-201.
109.
A. Di Gerlando, G. Foglia, R. Perini: “Analytical Evaluation of Flux-Linkages and Electromotive Forces in
Synchronous Machines Considering Slotting, Saliency and Saturation Effects”, ISEF 2007 - XIII Intern.
Symposium on Electromagnetic Fields in Mechatronics, Electrical and Electronic Engineering, Prague, Czech
Republic, Sept. 13-15, 2007, Proc. on CD-Rom, ISBN 978-80-01-03784-3, Paper N° 86
110.
A. Di Gerlando, G. Foglia, R. Perini: “Analytical Calculation of the Electromagnetic Torque in Synchronous
Machines Considering Slotting, Saliency and Saturation Effects”, ISEF 2007 - XIII Intern. Symposium on
Electromagnetic Fields in Mechatronics, Electrical and Electronic Engineering, Prague, Czech Republic, Sept.
13-15, 2007, Proc. on CD-Rom, ISBN 978-80-01-03784-3, Paper N° 88
111.
A. Di Gerlando, G. Foglia, R. Perini, M. Ubaldini: “Permanent Magnet Synchronous Machines with
Concentrated Coil Armature Windings: Analysis and Test Validation of Single Stator – Double Rotor, Axial
Flux Machines”, Electrical Engineering (Archiv fur Elektrotechnik), Vol. 90, N° 1, Nov. 2007, pp. 65-77.
112.
A. Di Gerlando, G. Foglia, L. Frosio, R. Perini: “An Analytical Thermal Model Applied To A Tooth Coil
Permanent Magnet Synchronous Machine”; Proc. of ICEM08, International Conference on Electrical Machines,
Vilamoura, Portugal, 6-9 September 2008, Conf. Record on CD: Paper N° 941, ISBN 978-1-4244-1736-0.
113.
A. Di Gerlando, G. Foglia, R. Perini: “Analytical Modelling Of Unbalanced Magnetic Pull In Isotropic Electrical
Machines”; Proc. of ICEM08, International Conference on Electrical Machines, Vilamoura, Portugal, 6-9
September 2008, Conf. Record on CD: Paper N° 1098, ISBN 978-1-4244-1736-0.
114.
A. Di Gerlando, G. Foglia, R. Perini, M. Ubaldini: “Operation And Sizing Aspects of Converters For Wind
Energy Systems Equipped With Direct-Drive, Permanent Magnet Generators”; Proc. of ICEM08, International
Conference on Electrical Machines, Vilamoura, Portugal, 6-9 September 2008, Conf. Record on CD: Paper N°
1534, ISBN 978-1-4244-1736-0.
115.
A. Di Gerlando, G. Foglia, R. Perini: “Permanent Magnet Machines for Modulated Damping of Seismic
Vibrations: Electrical and Thermal Modeling”, IEEE Trans. on Industrial Electronics, Vol. 55, Issue 10, Oct.
2008 Page(s): 3602 - 3610 Digital Object Identifier 10.1109/TIE.2008.928105.
116.
A. Di Gerlando, G. Foglia, M. Iacchetti, R. Perini: “Analytical Modelling of the Air-Gap Magnetic Field in
Surface Permanent Magnet Machines, Based on Selective FEM Magneto-Static 2D-Simulations”; ISEF 2009 XIX Intern. Symposium on Electromagnetic Fields in Mechatronics, Electrical and Electronic Engineering;
Arras, France, Sept. 10-12, 2009; Proc. on CD-Rom; ISBN: 978 - 2 - 84832 - 115 – 8 Paper N° 173.
116b. A. Di Gerlando, G. Foglia, M. Iacchetti, R. Perini: “Analytical Modelling of the Air-Gap Magnetic Field in
Surface Permanent Magnet Machines, Based on Selective FEM Magneto-Static 2D-Simulations”, Computer
Field Models of Electromagnetic Devices, S. Wiak and E. Napieralska-Juszczak Editors, Series “Studies in
Applied Electromagnetics and Mechanics” IOS Press, 2010, Vol. 34 ISBN 978-1-60750-603-4, pp.144-154.
117. A. Di Gerlando, G. Foglia, M. Iacchetti, R. Perini: “2-D Analytical Evaluation of Magnetic Field and Unbalanced
Magnetic Pull in Isotropic Electrical Machines with Eccentric Rotor”; ISEF 2009 - XIX Intern. Symposium on
Electromagnetic Fields in Mechatronics, Electrical and Electronic Engineering; Arras, France, Sept. 10-12,
2009; Proc. on CD-Rom; ISBN: 978 - 2 - 84832 - 115 – 8 Paper N° 109.
117b. A. Di Gerlando, G. Foglia, M. Iacchetti, R. Perini: “2-D Analytical Evaluation of Magnetic Field and Unbalanced
Magnetic Pull in Isotropic Electrical Machines with Eccentric Rotor”, Computer Field Models of
Electromagnetic Devices, S. Wiak and E. Napieralska-Juszczak Editors, Series “Studies in Applied
Electromagnetics and Mechanics” IOS Press, 2010, Vol. 34 ISBN 978-1-60750-603-4, pp.164-176.
118.
A. Di Gerlando, G. Foglia, M. Iacchetti, R. Perini: “Magnetic Circuit Based Criteria for the Transformation of
FEM 3D Structures to FEM 2D Equivalent Problems of Radial Flux, PM Rotating Machines”; ISEF 2009 - XIX
Intern. Symposium on Electromagnetic Fields in Mechatronics, Electrical and Electronic Engineering; Arras,
France, Sept. 10-12, 2009; Proc. on CD-Rom; ISBN: 978 - 2 - 84832 - 115 – 8 Paper N° 108.
118b. A. Di Gerlando, G. Foglia, M. Iacchetti, R. Perini: “Magnetic Circuit Based Criteria for the Transformation of
FEM 3D Structures to FEM 2D Equivalent Problems of Radial Flux, PM Rotating Machines”, Computer Field
Models of Electromagnetic Devices, S. Wiak and E. Napieralska-Juszczak Editors, Series “Studies in Applied
Electromagnetics and Mechanics” IOS Press, 2010, Vol. 34 ISBN 978-1-60750-603-4, pp.270-278.
119.
A. Di Gerlando, G. Foglia, M. Iacchetti, R. Perini: “Analytical Model and Implementation by Equations of
Three-Phase Diode Bridge Rectifiers Operation”, ICEM 2010, Rome, Italy, Sept. 6-8, 2010, Proc. on CD, IEEE
Catalog N°: CFP1090B-CDR, ISBN: 978-1-4244-4175-4, Paper N° RF-005002, pp. 1-6.
120.
A. Di Gerlando, G. Foglia, M. Iacchetti, R. Perini: “Analysis and Comparison of Different Diode Rectifiers
Solutions in Grid Connected WECS Employing Modular PMSGs”, ICEM 2010, Rome, Italy, Sept. 6-8, 2010,
Proc. on CD, IEEE Catalog N°: CFP1090B-CDR, ISBN: 978-1-4244-4175-4, Paper N° RF-005029, pp. 1-6.
121.
A. Di Gerlando, G. Foglia, M. Iacchetti, R. Perini: “Simulation and Test Results of Grid connected WECSs with
Diode Rectifiers and Modular PMSGs”, ICEM 2010, Rome, Italy, Sept. 6-8, 2010, Proc. on CD, IEEE Catalog
N°: CFP1090B-CDR, ISBN: 978-1-4244-4175-4, Paper N° RF-008133, pp. 1-6.
122.
A. Di Gerlando, G. Foglia, M. Iacchetti, R. Perini: “Design Criteria of Axial Flux PM Machines for Direct Drive
Wind Energy Generation”, ICEM 2010, Rome, Italy, Sept. 6-8, 2010, Proc. on CD, IEEE Catalog N°:
CFP1090B-CDR, ISBN: 978-1-4244-4175-4, Paper N° RF-008168, pp. 1-6.
123.
A. Di Gerlando, G. Foglia, M. Iacchetti, R. Perini: “Design Criteria and Operation Analysis of a High Speed
Brushless PM Micro-Motor”, ICEM 2010, Rome, Italy, Sept. 6-8, 2010, Proc. on CD, IEEE Catalog N°:
CFP1090B-CDR, ISBN: 978-1-4244-4175-4, Paper N° RF-004995, pp. 1-8.
124.
A. Di Gerlando, G. Foglia, M. Iacchetti, R. Perini: “Torque and Losses in the Metallic Shell of a Dual
Mechanical Port PM Electrical Machine, for Dangerous Fluid Pumps”, ICEM 2010, Rome, Italy, Sept. 6-8,
2010, Proc. on CD, IEEE Cat. N°: CFP1090B-CDR, ISBN: 978-1-4244-4175-4, Paper N° RF-013749, pp.1-6.
125.
A. Di Gerlando, G. Foglia, M. Iacchetti, R. Perini: “Axial Flux PM Machines with Concentrated Armature
Windings: Design Analysis and Test Validation of Wind Energy Generators”, IEEE Trans. on Industrial
Electronics, Vol. 58, Issue 9, Sept. 2011 Pages:3795 – 3805 DOI 10.1109/TIE.2010.2081956
126.
A. Di Gerlando; G. Foglia; M. Iacchetti; R. Perini, "Analysis and Test of Diode Rectifiers Solutions in Grid
Connected Wind Energy Conversion Systems Employing Modular Permanent Magnet Synchronous Generators,"
Industrial Electronics, IEEE Trans. on , vol.59, no.5, pp.2135-2146, May 2012 doi: 10.1109/TIE.2011.2157295
127.
A. Di Gerlando; G. Foglia; M. Iacchetti, R. Perini, "Evaluation of Manufacturing Dissymmetry Effects in Axial
Flux PM Machines: Analysis Method based on Field Functions," Magnetics, IEEE Transactions on, vol.48, no.6,
pp.1995-2008, June 2012, doi: 10.1109/TMAG.2011.2180919
128.
A. Di Gerlando; G. Foglia; M. F. Iacchetti, “Mixed FEM2D – Analytical Method to Evaluate E.M.F. and Torque
in Surface PM Synchronous Machines,” Proc. of ICEM12, XXth Intern. Conf. on Electrical Machines, Marseille,
France, 02 - 05 Sept., 2012, ISBN 978-1-4673-0141-1, pp. 2831-2837.
129.
A. Di Gerlando; G. Foglia; M. F. Iacchetti, “FEM2D Based Analytical Model of the Air Gap Magnetic Field in
Surface PM Synchronous Machines,” Proc. of ICEM12, XXth Intern. Conf. on Electrical Machines, Marseille,
France, 02 - 05 Sept., 2012, ISBN 978-1-4673-0141-1, pp. 2824-2830.
130.
A. Di Gerlando; G. Foglia; M. F. Iacchetti, R. Perini, “Effects of Manufacturing Dissymmetry in Axial Flux PM
Machines,” Proc. of ICEM12, XXth Intern. Conf. on Electrical Machines, Marseille, France, 02 - 05 Sept., 2012,
ISBN 978-1-4673-0141-1, pp. 1285-1291.
131.
A. Di Gerlando, R. Perini, “The Universal Motor: a Classic Machine with Evergreen Challenges in Design and
Modeling,” invited paper in Proc. of WEMDCD 2013, Workshop on Electrical Machines Design, Control and
Diagnosis, Paris, France, March 11-12, 2013, DOI: 10.1109/WEMDCD.2013.6525168; ISBN 978-1-46735657-2, pp. 85-94.
132.
A. Di Gerlando, G. Foglia, M. F. Iacchetti, R. Perini, “Comprehensive steady-state analytical model of a threephase diode rectifier connected to a constant DC voltage source,” IET Power Electronics, The Institution of
Engineering and Technology, pp. 1-12, doi: 10.1049/iet-pel.2013.0026.
133.
A. Boglietti, A. M. EL-Refaie, O. Drubel, A. M. Omekanda, N. Bianchi, E. B. Agamloh, M. Popescu, A. Di
Gerlando, J Borg Bartolo: “Electrical Machine Topologies - Hottest Topics in the Electrical Machine Research
Community”, IEEE Industrial Electronics Magazine, Vol. 8, N 2, June 2014, pp. 18-30.
134.
A. Di Gerlando, G. Foglia, M. F. Iacchetti, R. Perini, “Effects of Manufacturing Imperfections in
Concentrated Coil Axial Flux PM Machines: Evaluation and Tests,” IEEE Trans. on Industrial Electronics, Vol.
61, No 9, September 2014, pp. 5012-5024.
135.
A. Di Gerlando, G. Foglia, M. F. Iacchetti, M. Ubaldini, “Optimized Coil Arrangement in Wound Interphase
Reactors for High-Power Rectifier Systems”, IEEE Trans. on Energy Conversion, Vol. 29, No 3, September
2014, pp. 652-662.
136.
A. Di Gerlando, G. Foglia, M. F. Iacchetti, R. Perini, “Analysis of Stray Paths for Parasitic Currents in
Some Topologies of Yokeless and Segmented Armature Axial Flux PM Machines,” Proc. of International
Conference on Electrical Machines, ICEM 2014, Berlin, Germany, 2-5 Sept. 2014, ISBN 978-1-4799-4775-1,
pp.390-395.
137.
A. Di Gerlando, G. Foglia, M. F. Iacchetti, R. Perini, “Sizing Comparison of Axial Flux PM Motors,
for Automotive Application,” Proc. of International Conference on Electrical Machines, ICEM 2014, Berlin,
Germany, 2-5 Sept. 2014, ISBN 978-1-4799-4775-1, pp.1409-1414.
138.
A. Di Gerlando, G. Foglia, M. F. Iacchetti, R. Perini, “Thermal Modeling for the Design and Check
of an Axial Flux PM Motor,” Proc. of International Conference on Electrical Machines, ICEM 2014, Berlin,
Germany, 2-5 Sept. 2014, ISBN 978-1-4799-4775-1, pp.1441-1447.
Pubblicazioni a carattere didattico
d1. I. Vistoli, A. Di Gerlando: “Appunti di Elettrotecnica”, Edizioni CUSL, Milano, Maggio 1991, 398 pagine.
d2. I. Vistoli, A. Di Gerlando: “Macchine Elettriche Speciali”, Cap.1 del Manuale Cremonese di Elettrotecnica - Parte
Specialistica , Firenze, 1992, 62 pagine.
d3. I. Vistoli, A. Di Gerlando: “Azionamenti con Macchine Elettriche”, Cap.2 del Manuale Cremonese di Elettrotecnica
- Parte Specialistica, Firenze, 1992, 66 pagine.
d4. I. Vistoli, A. Di Gerlando: “Costruzioni Elettromeccaniche”, Cap.8 del Manuale Cremonese di Elettrotecnica - Parte
Specialistica, Firenze , 1992, 108 pagine.
d5. A. Di Gerlando, R. Perini: “Appunti di Macchine Elettriche”, dispensa del Corso di Macchine Elettriche, Laurea
Ing. Elettrica indirizzo formativo, scaricabile da piattaforma Beep del Politecnico di Milano, 2014, 254 pagine
d6. F. Correggiari, A. Di Gerlando, G.M. Foglia: “Costruzione e Progetto di Macchine Elettriche”, dispensa del Corso
di Costruzione e Progetto di Macchine Elettriche, Laurea Magistrale Ing. Elettrica, scaricabile da piattaforma Beep
del Politecnico di Milano, 2013, 343 pagine.
d7. F. Correggiari, A. Di Gerlando, G.M. Foglia: “Construction and Design of Electrical Machines”, dispensa del
Construction and Design of Electrical Machines, Laurea Magistrale Ing. Elettrica, English track, scaricabile da
piattaforma Beep del Politecnico di Milano, 2013, 334 pagine.