Release Date: 2014-06-05 Version
Transcript
Release Date: 2014-06-05 Version
Version: V1.04.328010 Release Date: 2014-06-05 Copyright 2014, Builder: 2.3.4.2, Time: 10:11:15 PN Vendor ID Vendor Name Vendor Text Vendor URL Device ID 310 / 0x0136 - Bytes: 01 54 / 0x01 0x36 ifm electronic gmbh www.ifm.com http://http://www.ifm.com/ifmgb/web/io-link-download.htm 442 / 0x0001BA - Bytes: 00 01 186 / 0x00 0x01 0xBA Communication IO-Link Revision Bitrate Minimum Cycle Time SIO Mode Supported V1.1 COM2 2.300 ms Yes Features Block parametrization Data storage Yes Yes Device Variant PN7039 Sensore di pressione elettronico, -0.1...0.1 MPa, G1/4 I Page 1 Process Data (Dati di processo di ingresso) Total BitLength = 16 Name Description Datatype Bitoffset Bitlength Value Range Gradient Offset Unit con pressione Pressione attuale IntegerT 2 14 1101 to 5000 (OL) 0.001 0 bar -1000 to 1100 Stato di commutazione Stato in funzione di [OU2] [OUT2] BooleanT Stato di commutazione Stato in funzione di [OU1] [OUT1] BooleanT 1 (false) non attivo (true) attivo 0 (false) non attivo (true) attivo Page 2 Variables Name Standard Command Description Index Subindex DataType bitOffset 2 Sub 0 UIntegerT Length Access Default Rights 8 Bit wo Value Range Gradient Offset Unit (130) Restore Factory Setting (161) Reset memoria [HI] e [LO] (162) Reset memoria [LO] (163) Reset memoria [HI] (169) Reset overload counter [HIPC] (240) Test di sistema IO-Link 1.1 comando 240, si verifica evento 8DFE (241) Test di sistema IO-Link 1.1 comando 241, evento 8DFE scompare (242) Test di sistema IO-Link 1.1 comando 242, si verifica evento 8DFE (243) Test di sistema IO-Link 1.1 comando 243, evento 8DFE scompare (255) Comando senza conseguenza, solo per uso interno Device Access Lock Data Storage Lock 12 Sub 0 RecordT 16 Bit bitOffs 1 BooleanT 1 Bit rw (0) Page 3 Variables Name Description Device Access Lock Index Subindex DataType bitOffset 12 Sub 0 bitOffs 3 Local User Interface Lock Length Access Default Rights RecordT 16 Bit rw BooleanT 1 Bit 16 Sub 0 max 19 Byte ro ifm electronic gmbh Vendor Text 17 Sub 0 max 11 Byte ro www.ifm.com Product Name 18 Sub 0 max 6 Byte ro PN7039 Product ID 19 Sub 0 max 6 Byte ro PN7039 Product Text 20 Sub 0 max 26 Byte ro Electronic pressure sensor Serial Number 21 Sub 0 max 12 Byte ro Hardware Version 22 Sub 0 max 2 Byte ro Firmware Version 23 Sub 0 max 5 Byte ro Application Specific Tag 24 Sub 0 max 16 Byte rw *** Device Status 36 Sub 0 8 Bit ro 0 Detailed Device Status 37 Sub 0 21 Byte ro 00 00 00 h 500 Sub 0 8 Bit rw (0) PnP P-n Polarità delle uscite di commutazione UIntegerT Gradient Offset Unit (0) Vendor Name UIntegerT Value Range (0) PnP (1) nPn Page 4 Variables Name Description Index Subindex DataType bitOffset DAP Tempo di risposta tra 510 variazione del valore di processo e variazione dell'uscita di commutazione Sub 0 LOC [Loc] blocca il sensore per 550 proteggerlo da manomissione involontaria. [Loc] può essere resettato sul prodotto Sub 0 Length Access Default Rights Value Range Gradient Offset Unit UIntegerT 16 Bit rw 60 0 to 4000 0.001 UIntegerT 8 Bit rw (1) uLoc 0 s (0) Loc (1) uLoc Sub 0 RecordT 16 Bit bitOffs 7 BooleanT 1 Bit (false) ON Orientamento dell'indicazione bitOffs 6 BooleanT 1 Bit (false) Non ruotata Frequenza di aggiornamento bitOffs 0 diS Indicazione ON / OFF Impostazioni display 552 rw (false) ON (true) OFF (false) Non ruotata (true) Ruotata di 180° UIntegerT 6 Bit (2) d2 / media (1) d1 / rapida (2) d2 / media (4) d3 / lenta Page 5 Variables Name Description Index Subindex DataType bitOffset COLR Assignment of the display colours 'red' and 'green' within the measuring range 554 Sub 0 UIntegerT Length Access Default Rights 8 Bit rw Value Range Gradient Offset Unit (2) rEd (2) rEd (3) GrEn (4) r1ou (5) G1ou (6) r2ou (7) G2ou (8) r-12 (9) G-12 (10) r-cF (11) G-cF CFL Lower value for colour change. 555 Sub 0 IntegerT 16 Bit rw -1000 -1000 to 990 0.001 0 bar Parameter only active after selection of a freely definable colour window in the coLr parameter: [r-cF] or [G-cF]. The setting range corresponds to the measuring range and its maximum limit is [cFH] Page 6 Variables Name Description Index Subindex DataType bitOffset Length Access Default Rights Value Range Gradient Offset Unit CFH Upper value for colour change. 556 Sub 0 IntegerT 16 Bit rw -990 to 1000 0.001 0 bar 560 Sub 0 IntegerT 16 Bit ro 0.001 0 bar 0.001 0 bar 1000 Parameter only active after selection of a freely definable colour window in the coLr parameter: [r-cF] or [G-cF]. The setting range corresponds to the measuring range and its minimum limit is [cFL] HI Memoria valore massimo 1101 to 5000 (OL) -1000 to 1100 LO Memoria valore minimo 561 Sub 0 IntegerT 16 Bit ro 1101 to 5000 (OL) -1000 to 1100 Ou1 Configurazione dell'uscita [OUT 1] 580 Sub 0 UIntegerT 8 Bit rw (3) Hno / Funzione isteresi, NO (3) Hno / Funzione isteresi, NO (4) Hnc / Funzione isteresi, NC (5) Fno / Funzione finestra, NO (6) Fnc / Funzione finestra, NC Page 7 Variables Name Description Index Subindex DataType bitOffset Length Access Default Rights Value Range Gradient Offset Unit dS1 Tempo di ritardo per [SP1] / 581 finestra. Se la pressione di sistema è superiore a [SP1] o se subentra nel campo accettabile (finestra), l'uscita cambia lo stato di commutazione al termine del tempo [dS1] Sub 0 UIntegerT 16 Bit rw 0 0 to 500 0.1 0 s dR1 Tempo di ritardo per [rP1] / 582 finestra. Se la pressione di sistema è inferiore a [rP1] o abbandona il campo accettabile (finestra), l'uscita cambia lo stato di commutazione al termine del tempo [dr1] Sub 0 UIntegerT 16 Bit rw 0 0 to 500 0.1 0 s SP_FH1 Punto di commutazione 1, 583 [SP1] deve essere maggiore di [rP1]. Considerare il valore attuale [rP1]. Se viene impostato un valore [SP1] inferiore a [rP1], questo viene scartato. Sub 0 IntegerT 16 Bit rw -500 -980 to 1000 0.001 0 bar RP_FL1 Punto di disattivazione 1, 584 [rP1] deve essere inferiore a [SP1]. Considerare il valore attuale [SP1]. Se viene impostato un valore [rP1] superiore a [SP1], questo viene scartato. Sub 0 IntegerT 16 Bit rw -540 -990 to 990 0.001 0 bar Page 8 Variables Name Description Index Subindex DataType bitOffset Ou2 Configurazione dell'uscita [OUT 2] 590 Sub 0 UIntegerT Length Access Default Rights 8 Bit rw Value Range Gradient Offset Unit (3) Hno / Funzione isteresi, NO (3) Hno / Funzione isteresi, NO (4) Hnc / Funzione isteresi, NC (5) Fno / Funzione finestra, NO (6) Fnc / Funzione finestra, NC dS2 Tempo di ritardo per [SP2] / 591 finestra. Se la pressione di sistema è superiore a [SP2] o se subentra nel campo accettabile (finestra), l'uscita cambia lo stato di commutazione al termine del tempo [dS2] Sub 0 UIntegerT 16 Bit rw 0 0 to 500 0.1 0 s dR2 Tempo di ritardo per [rP2] / 592 finestra. Se la pressione di sistema è inferiore a [rP2] o abbandona il campo accettabile (finestra), l'uscita cambia lo stato di commutazione al termine del tempo [dr2] Sub 0 UIntegerT 16 Bit rw 0 0 to 500 0.1 0 s SP_FH2 Punto di commutazione 2, 593 [SP2] deve essere maggiore di [rP2]. Considerare il valore attuale [rP2]. Se viene impostato un valore [SP2] inferiore a [rP2], questo viene scartato. Sub 0 IntegerT 16 Bit rw 500 -980 to 1000 0.001 0 bar Page 9 Variables Name Description Index RP_FL2 Punto di disattivazione 2, 594 [rP2] deve essere inferiore a [SP2]. Considerare il valore attuale [SP2]. Se viene impostato un valore [rP2] superiore a [SP2], questo viene scartato. Sub 0 HIPS Impostazione della soglia per 5003 il contatore di sovraccarico HIPC Numero di sovraccarichi 5004 Subindex DataType bitOffset Length Access Default Rights Value Range Gradient Offset Unit IntegerT 16 Bit rw 460 -990 to 990 0.001 0 bar Sub 0 IntegerT 16 Bit rw 1000 -1000 to 1000 0.001 0 bar Sub 0 UIntegerT 32 Bit ro 0 to 4294967295 Events Code Name Type Description 20480 d / 50 00 h Device hardware fault Error Device Exchange 25376 d / 63 20 h Parameter error Error Check data sheet and values 30480 d / 77 10 h Short circuit Error Check installation 35856 d / 8C 10 h Process variable range over-run Warning Process data uncertain 35888 d / 8C 30 h Process variable range under-run Warning Process data uncertain 36350 d / 8D FE h Test Event 1 Warning Event appears by setting index 2 to value 240, Event disappears by setting index 2 to value 241 36351 d / 8D FF h Test Event 2 Warning Event appears by setting index 2 to value 242, Event disappears by setting index 2 to value 243 Page 10 Error Types ErrorCode Name Description 32768 d / 80 00 h Device application error - no details Service has been refused by the device application and no detailed information of the incident is available 32785 d / 80 11 h Index not available Access occurs to a not existing index 32786 d / 80 12 h Subindex not available Access occurs to a not existing subindex 32800 d / 80 20 h Service temporarily not available Parameter is not accessible due to the current state of the device application 32803 d / 80 23 h Access denied Write access on a read-only parameter 32816 d / 80 30 h Parameter value out of range Written parameter value is outside its permitted value range 32819 d / 80 33 h Parameter length overrun Written parameter length is above its predefined length 32820 d / 80 34 h Parameter length underrun Written parameter length is below its predefined length 32821 d / 80 35 h Function not available Written command is not supported by the device application 32822 d / 80 36 h Function temporarily unavailable Written command is not available due to the current state of the device application 32832 d / 80 40 h Invalid parameter set Written single parameter collides with other actual parameter settings 32833 d / 80 41 h Inconsistent parameter set Parameter inconsistencies were found at the end of block parameter transfer, device plausibility check failed 32898 d / 80 82 h Application not ready Read or write service is refused due to a temporarily unavailable application Page 11