capitolato tecnico
Transcript
capitolato tecnico
ST Protect S.p.A. Servizio Tecnico COMPLETO DA INTERVENTO MODELLO “STARK” a norma UNI-EN 469:2007 per Vigili del Fuoco Il completo da intervento specifico per Vigili del Fuoco modello “STARK” per la lotta contro gli incendi, costituito da un GIACCONE e da SOVRAPANTALONE è conforme alle norme UNI EN 340:2004 e UNI-EN 469:2007 livelli Xf2, Xr2, Y2, Z1. Il DPI è così confezionato: - Tessuto esterno 93% meta aramide, 5% para aramide, 2% fibra antistatica da 180 gr/mq - Tessuto membrana composizione 70% poliestere e 30 % poliuretano - Tessuto interno FELT composizione 100% aramidico - Tessuto fodera 50% Nomex e 50% Viscosa GIACCONE STARK codice identificativo 49335 GIACCONE protettivo con imbottitura fissa, dotato di apertura frontale, fermata tramite cerniera a doppio cursore, protetta nella parte interna ed in quella esterna da patella, fermata con nastro velcro ignifugo. Collo alto, chiudibile tramite alamaro, fermato con nastro velcro. Cappuccio staccabile a mezzo bottoni a scatto e dotato di cordoncino di regolazione. Maniche a spallone con polsino in maglia di NOMEX interno, munite di sistema di regolazione al fondo tramite alamaro con nastro velcro. Due tasche applicate ai fianchi, chiuse tramite aletta di protezione fermata con nastro velcro. Una tasca interna nella fodera, al petto sinistro chiusa tramite tratto di nastro velcro. Bande di materiale catarifrangente ignifugo di colore GRIGIO/ARGENTO ignifughe alte 50 mm. cadauna, applicate al fondo giacca, al fondo manica ed alla circonferenza torace. Tutte le cuciture esterne sono realizzate impiegando esclusivamente filati in NOMEX ad alta tenacità. Lo strato interno realizzato con la MEMBRANA IMPERMEABILE viene completamente termosaldato nelle cuciture di assemblaggio al fine di assicurare la massima garanzia di impermeabilità del capo; appositi occhielli con funzione di drenaggio dell’acqua che viene fermata dalla membrana impermeabile sono previsti al fondo giacca. SOVRAPANTALONE STARK codice identificativo 49336 SOVRAPANTALONE protettivo, dotato di elasticizzazione in vita fermata nella parte anteriore con abbottonatura a scatto. Tutte le cuciture esterne sono realizzate impiegando esclusivamente filati in NOMEX ad alta tenacità. Lo strato interno realizzato con la MEMBRANA IMPERMEABILE garantisce l’impermeabilità del capo; appositi occhielli con funzione di drenaggio dell’acqua che viene fermata dalla membrana impermeabile sono previsti al fondo. Disponibile nelle taglia dalla 44 alla 66. APPROVATO secondo quanto previsto dal DL 407 del 06/10/1999 Regolamento recante norme di attuazione delle direttive 96/98/CE come emendata dalla 2011/75/UE relative all’equipaggiamento marittimo, certificazione rilasciata dall’organismo notificato – 0407 – ISTITUTO GIORDANO spa - Via Rossini n. 2 – 47814 Bellaria (RN) - ITALY – sulla base dell’articolo 11 della direttiva sopra menzionata. 0161 APPROVATO in ottemperanza alla direttiva 89/686/CEE, recepita nel Regio Decreto Spagnolo 1407/1992, in conformità alle norme UNI EN 340:2004 e UNI EN 469:2007 ed identificato sulla base delle legislazioni sopra esposte come DPI di III categoria. Rev.4 del 22/03/2013 ST Protect S.p.A. Servizio Tecnico FIRE-FIGTHING SUIT STYLE “STARK” according to UNI EN 469:2007 for Fire-fighters This PPE developed for fire-fighting style “STARK”, is composed of jacket and trousers in compliance with technical specification UNI EN 340:2004 e UNI-EN 469:2007 levels Xf2, Xr2, Y2, Z1. This PPE is composed of: a) Outer layer: 93% meta aramide 5% para aramide 2% antistic fibre weight 180 gr/m 2 b) Waterproof layer: 70% polyester 30%polyurethane c) Isolation: 100% aramide FELT d) Lining: 50% Nomex 50% Viscose Protective JACKET with fixed padding. Front fastening by means of 2-runner zipper, protected by flap, both in the inner and outer part, fixed with flame resistant Velcro ®. High style neck fastened with Velcro®. Removable hood by means of press studs, with adjusting cord. Kimono sleeves with inner cuff in NOMEX®, with adjusting system at the bottom by Velcro®. Two patched pockets closed by protective flap fastened by Velcro ® tape. One inner pocket in the lining, on the left chest , operated by Velcro ® tape. Reflective flame resistant tapes silver grey colour type 3M 8930 5 cm high placed around the bottom of the jacket and around the thorax and on lower sleeves. All outer seams made with Nomex® high quality yarn. The internal layer made of WATERPROOF MEMBRANE is taped on all its seams in order to assure the garment waterproof property. Drainage holes on the lower jacket. Protective TROUSERS, elastic at waist closed with press-studs at the front. All the outer seams are made with NOMEX® high quality yarn. The inner layer with WATERPROOF MEMBRANE guarantees the trousers waterproof, more likely to be in contact with splashes; drainage holes on lower trousers. Available in sizes from 44 to 66. APPROVED according to Law Decree 407 dated 06/10/1999, as per directive 96/98/CE and 2011/75/CE concerning marine equipment ; this certification approval is issued by notified body 0407 – ISTITUTO GIORDANO spa, Via Rossini n° 2 – 47814 Bellaria (RN) – ITALY. 0161 APPROVED according to directive 89/686/CEE – Royal Spanish Decree 1407/1992 in conformity to UNI EN 340:2004 and UNI EN 469:2007 standards and identified as 3rd category PPE. Rev.4 del 22/03/2013