to get the file
Transcript
to get the file
Pubblications Rocco Rizzo Rocco Rizzo is author of more than 30 of papers, technical reports and scienti…c studies, as a result of his research activity. International Journals: 1J- S. Barmada, A. Musolino, R. Rizzo, B. Tellini; ”Transient Electromagnetic Response of a Tubular linear Induction Motor”, Studies in Applied Electromagnetics and Mechanics, vol. 18, pp. 513 - 516 IOS Press, 2000. 2J- S. Barmada, A. Musolino, R. Rizzo, B. Tellini; ”A Hybrid Formulation for Nonlinear Magnetostatic Analysis”, Studies in Applied Electromagnetics and Mechanics, vol. 18, pp. 343 - 346 IOS Press, 2000. 3J- S. Barmada, A. Musolino, F. Nencioni, R. Rizzo, A. Tellini; ”Analysis of Non-linear Electrostatic Devices by a Hybrid FEM-MOM Formulation”, COMPEL, vol. 19, n. 2, 2000 pp 217 - 223. 4J- S. Barmada, A. Musolino, F. Nencioni, R. Rizzo, A. Tellini; ”Design of a Two-axes Active Electromagnetic Sidestick Actuating System”, COMPEL, vol. 19, n. 2, 2000 pp. 582 - 588. 5J- S. Barmada, A. Musolino, R. Rizzo, A. Tellini; ”Fields Analysis in Axysimmetric Actuators”, IEEE Trans. on Mag., Vol. 36, Issue 4, July 2000 pp. 1906 - 1909. 6J- S. Barmada, A. Musolino, M. Raugi, R. Rizzo; ”Analysis of the Performance of a MultiStage Pulsed Linear Induction Launcher”, IEEE Trans. on Mag., Vol. 37, Issue 1, Jan. 2001 pp. 111 - 115. 7J- A. Musolino, M. Raugi, R. Rizzo, A. Tellini; ”The Multi-Stage Railgun”, IEEE Trans. on Mag., Vol. 37, Issue 1, Jan. 2001 pp. 445 - 449. 8J- S. Barmada, A. Musolino, M. Raugi, R. Rizzo; ”Force and Torque Evaluation in Hybrid FEM-MOM Formulations”, IEEE Trans. on Mag., Vol. 37, Issue 5, Sept. 2001 pp. 3108 - 3111. 1/4 Elenco Pubblicazioni Rocco Rizzo 9J- S. Barmada, A. Musolino, M. Raugi, R. Rizzo; ”Numerical Solution of Maxwell’s Equations by Wavelets on the Interval and Equivalence Theorem”, IEEE Trans. on Mag., Vol. 38, Issue 2, March 2002 pp. 381 - 384. 10J- S. Barmada, A. Musolino, M. Raugi, R. Rizzo; ”Analysis of the performances of a Combined Coil-Rail Launcher”, IEEE Trans. on Mag., Vol. 39, Issue 1, Jan. 2003 pp. 103 - 107. 11J- S. Barmada, A. Musolino, M. Raugi, R. Rizzo; ”Analysis of a Homopolar Disk Generator via Equivalent Network”, IEEE Trans. on Mag., Vol.39, Issue 1, Jan. 2003 pp. 125 - 128. 12J- A. Musolino, M. Raugi, R. Rizzo, A.Tellini; ”Analysis of the performance of a MultiStage Railgun”, IEEE Trans. on Mag., Vol. 39, Issue 1, Jan. 2003 pp. 462 - 467. 13J- S. Barmada, A. Musolino, R. Rizzo; ”E¢ ciency improvement of Integral Formulation Algorithms via Multiresolution Analysis”, IEEE Trans. on Mag., Vol. 39, Issue 3, May 2003 pp. 1417 - 1420. 14J- S. Barmada, A. Musolino, R. Rizzo; ”Analysis of Trasmission Lines with FrequencyDependent Parameters by Wavelet-FFT Method”, IEEE Trans. on Mag., Vol. 39, Issue 3, May 2003 pp. 1602 - 1605. 15J- S. Barmada, A. Musolino, M. Raugi and R. Rizzo; ”Numerical Simulation of a Complete Generator-Rail Launch System”, IEEE Trans on Mag., Vol. 41, Issue 1, Jan. 2005 pp. 369 - 374. 16J- A. Bicchi, M. Raugi, R. Rizzo, and N. Sgambelluri; ”Analysis and Design of an Electromagnetic System for the Characterization of Magneto-Rheological Fluids for Haptic Interfaces”, IEEE Trans on Mag., Vol. 41, Issue 5, May 2005 pp. 1876 - 1879. 17J- S. Barmada, A. Musolino, and R. Rizzo; ”Equivalent Network Approach for the Simulation of MEMS Devices”, ACES Journal, Vol. 21, Issue 1, March 2006 pp. 16 - 25. International Conferences: 1C- S. Barmada, A. Musolino, M. Raugi, R. Rizzo; ”Wavelet analysis of MTL equations with frequency dependent parameters and arbitrary load”, Proceedings of CEFC 2000, Milwaukee, USA 4-7 June 2000, p. 180. 2C- S. Barmada, A. Musolino, R. Rizzo; ”Design Criteria for a Tubular Linear Induction Motor as a Fast Actuator”, Proceedings of The 9th International IGTE Symposium on Numerical Field Calculation in Electrical Engineering, 11-13 September 2000, Graz, Austria, pp. 231-236. 3C- S. Barmada, R. Rizzo; ”Equivalent Electric Network for the Evaluations of Radiated Electromagnetic Fields”, Proceedings of PIERS 2002, Cambridge, Massachusetts, USA 1-5 July 2002, p. 17. 2/4 Elenco Pubblicazioni Rocco Rizzo 4C- S. Barmada, Del Vecchio C., R. Rizzo; ”Advanced Modeling of Induction Coils for Fast Actuators in a Large Binocular Telescope”, 10th International IGTE Symposium on Numerical Field Calculation in Electrical Engineering, 16-18 September 2002, Graz, Austria, pp. 28-33. 5C- S. Barmada, A. Musolino, R. Rizzo; ”A Quasi-Analytical Model for Remote Field Eddy Current Inspection”, 10th International IGTE Symposium on Numerical Field Calculation in Electrical Engineering, 16-18 September 2002, Graz, Austria, pp. 34-38. 6C- R. Rizzo; ”Design, Realization and Analysis of the Performance of a Device for the Energization and Characterization of Magneto-Rheological Fluids”, 10th International IGTE Symposium on Numerical Field Calculation in Electrical Engineering, 16-18 September 2002, Graz, Austria, pp. 108-113. 7C- R. Bassani, A. Musolino, R. Rizzo; ”Controlled Passive Maglev Transport”, Book of Reports International Congress MTT2003-Mechanics and Tribology of Transport Systems2003- 10-13 September 2003, Rostov on Don, Russia, pp. 65-71. 8C- S. Barmada, A. Musolino, M. Raugi, R. Rizzo; ”Grid Truncation in FDTD Formulations via Equivalence Theorem”, Proceedings of PIERS 2003, Honolulu, USA, 13 –16 October 2003, pp. 705-705. 9C- R. Rizzo, N. Sgambelluri; ”Design of a System for the Energization of MagnetoRheological Fluids”, PIERS 2004, Pisa, Italy, 28-31 March 2004, pp. 921-924. 10C- R. Rizzo; ”Stability Analysis of a Passive MAGLEV System”, PIERS 2004, Pisa, Italy, 8-31 March 2004, pp. 843-846. 11C- N. Sgambelluri, R. Rizzo, E. P. Scilingo, A. Bicchi, M. Raugi; ”Analysis and Design of a New Haptic Box Display Based on Magneto-Rheological Fluids”, EUROHAPTICS 2004, Munich, Germany, June 5-7, 2004. 12C- N. Sgambelluri, R. Rizzo, E. P. Scilingo, M. Raugi, A. Bicchi; ”The CYLHAB MRFBased Electromagnetic Device for Haptic Interfaces”, WORLDHAPTICS, Pisa, Italy, March 18-20, 2005. Ph.D Thesis: - R. Rizzo:”Analytical and Numerical techniques for the analysis of electromagnetic devices with moving parts”, Pisa, Dicembre 2002. Technical Reports: - R. Rizzo:”Analysis and Design Criteria of Electromagnetic Actuators for an Adaptive Secondary Mirror for the MMT Telescope”. Pisa, June 2001 R. Rizzo:”Synthesis of Electromagnetic Devices”, Pisa, May 2003 . 3/4 Elenco Pubblicazioni Rocco Rizzo - R. Rizzo:”Analysis of Devices for the Energization of Magneto-Rheological Fluids for Haptic Interfaces”, Pisa, October 2003. - R. Rizzo:”National Project for Recognition and Analysis of Italian Ph.D. Courses and Investigation about Professional Placement of Ph.D.”, Rome, February 2004 (First Part). - N. Sgambelluri, R. Rizzo, E. P. Scilingo, A. Bicchi: ”Speci…cations and prototype of Rheological Device”, Pisa, March 2004. Scienti…c Studies: - M. Bianchetti, F. Della Ratta, M. Lanzoni, V. Pischedda, R. Rizzo, M. C. Usai, ADI - Associazione Dottorandi e Dottori di Ricerca Italiani, ”Studio e sperimentazione di un sistema di valutazione dei dottorati di ricerca dell’Università degli Studi di Milano-Bicocca - area dottorandi di ricerca” (2002). (In Italian). - M. Bianchetti, F. Della Ratta, M. Lanzoni, V. Pischedda, R. Rizzo, M. C. Usai, ADI - Associazione Dottorandi e Dottori di Ricerca Italiani, ”Studio e sperimentazione di un sistema di valutazione dei dottorati di ricerca dell’Università di Pisa - area requisiti di idoneità e dottorandi di ricerca” (2002). (In Italian). Pisa, March, 2006 Rocco Rizzo 4/4