sct-IT-EN Terminal block TB0190
Transcript
sct-IT-EN Terminal block TB0190
0 49,5 ±0,3 41,8 ±0,1 11,2 ±0,1 7,7 ±0,1 B A Backgroung surface shiny 0 3,5 ±0,5 +0,2 10 - 0,1 2 == 2 +0,2 10 - 0,1 90,8 ±0,3 6 == 81,8 ±0,3 3 49,2 ±0,1 5 55,7 ±0,3 30,2 ±0,1 24,6 ±0,3 == Letter surface dull 14,4 ±0,1 +0,2 10 - 0,1 Date stamp 35,1 ±0,1 Letter surface dull 25,9 10° Backgroung surface shiny 5 7 1 1 L-N-PE VERSION for codes see the configuration table 1 B SEZIONE B-B A Auxiliary screw (tie side) is used only for Canadian market. Torque wrench setting 0.5+,1/-0 Nm at 650 rpm TECHNICAL DATA UM EU RATING V rms 450V Tabs Ambient temperature Protection degree Plastic material Terminal Block screw Cable clamp screw A rms mm2 n. °C IP 41A (3 tabs connected) 6mm2 Flexible 3-6 01 6,3x0,8 T125 IP20 According to EN 60335-1 GWT 750° (2sec.)/ GWFI 850° M6 x 11 Torx T20 3.5x19 Torx T20 8 31/01/14 7 23/01/14 6 12/11/13 5 4 3 24/09/13 01/03/13 21/02/13 2 20/12/12 1 17/09/12 Rev. DATA Terminal screws Cable clamp screw Modified metric-screw head: from T25 to T20. Modified screwplast head: from T10 to T20. Updated assembled codes. Added new code version: TB0190.05.03. Description: TB190/5P/NF/WSA/WCK. Added new code version: TB0190.05.01. Description: TB190/5PE/NF/WSA. Added new code version: TB0190.06.04. Description: TB190/6P/NF/WSA/BR4-5/WCK L-N. Updated plastic components codes Added note for auxiliary screw screwing and changed tollerances in the sec. B-B (was 81.8+0.5/-0) Removed recycling mark from the body and cover. Updated UL mark Updated drawing to the dimensional report and configurations Descrizione Revisione disegno / Modifiche ( Change) Disegno eseguito con sistema cad Min. thickness Kind of construction Armaroli Armaroli Armaroli Armaroli Chirumbolo Chirumbolo Chirumbolo Chirumbolo Progettista Non sono ammesse variazioni o modifiche manuali PROPRIETA ITW FASTEX ITALIA S.p.A. - IL PRESENTE DISEGNO NON PUO ESSERE UTILIZZATO, PRODOTTO O COMUNICATO A TERZI SENZA PREVENTIVA AUTORIZZAZIONE, OGNI VIOLAZIONE SARA PERSEGUITA A TERMINI DI LEGGE TORQUE WRENCH SETTING 2 N/m (650rpm) 0.8 N/m (650 rpm) 18 lb/in 7 lb/in * Torque values indicated in the table are for the assembly process. 3,5 +/-0,5: is the position of the screw M6x11 Empty box: contact not assembled OLD REF. PD: 4768 PER PARTI NON QUOTATE Angoli di spoglia : (Draft degree) Per dim. lineari: m; per dim. angolari: v TERMINAL BLOCK CONFIGURATION Rated current Rated connecting capacity Conductor type Number of poles US RATING 300V 35A 8 - 22 AWG (for linear dim.: m; for angular dim.: v.) Per dim. < 0,5: ±0,05 (for dim. < 0,5: ±0,05) TB0190.06.00.01 TB190/6P/NF/WSA/BR4-5/WCK 3,5 +/-0,5 *1.3Nm (+0.1/0) 3,5 +/-0,5 3,5 +/-0,5 3,5 +/-0,5 WCK With cover closed BR Bridge assembled into the T.B. (followed by the poles number where bridge is assembled) WSA With screw assembled in the cable clamp K Cover supplied separatly NF No Flame plastic material WS With screw for cable clamp supplied into the box E With Grounding Plate or earth bracket. Symbol Property Rated insulation voltage *1.3Nm (+0.1/0) TB0190.06.01.01 TB190/6P/NF/K 3,5 +/-0,5 3,5 +/-0,5 3,5 +/-0,5 3,5 +/-0,5 3,5 +/-0,5 3,5 +/-0,5 TABS POSITION SCALA 2:1 UNI EN 22768 TB0190.06.02.01 TB190/6PE/NF/WSA/BR4-5/WCK *1.3Nm (+0.1/0) *1.3Nm (+0.1/0) 3,5 +/-0,5 3,5 +/-0,5 3,5 +/-0,5 *1.3Nm (+0.1/0) TB0190.05.00.01 TB190/5P/NF/K 3,5 +/-0,5 3,5 +/-0,5 3,5 +/-0,5 3,5 +/-0,5 3,5 +/-0,5 3,5 +/-0,5 3,5 +/-0,5 3,5 +/-0,5 TB0190.04.00.01 TB190/4P/NF/K 3,5 +/-0,5 TB0190.04.01.01 TB190/4PE/NF/K *1.3Nm (+0.1/0) 3,5 +/-0,5 3,5 +/-0,5 3,5 +/-0,5 NOTE GWT 750° (2sec.) - GWFI 850° GWT 750° (2sec.) - GWFI 850° GWT 750° (2sec.) - GWFI 850° Nikel plated steel Zinc plated steel Brass Zinc plated steel SUPPLIED IN THE CARTON BOX ASSEMBLED IN THE CABLE CLAMP (For dimension without tolerance see) TB0190.04.02.01 TB190/4P/NF/WSA/WCK 3,5 +/-0,5 3,5 +/-0,5 3,5 +/-0,5 COLOR BLACK BLACK BLACK Per quote prive di tolleranza vedere TB0190.03.00.01 TB190/3PE/NF/WSA/WCK *1.3Nm (+0.1/0) 3,5 +/-0,5 3,5 +/-0,5 3,5 +/-0,5 6 6 1 1 6 6 2 3,5 +/-0,5 3,5 +/-0,5 3,5 +/-0,5 3,5 +/-0,5 3,5 +/-0,5 3,5 +/-0,5 1 3,5 +/-0,5 1 5 5 1 6 6 3 1 1 ITW CODE 1905572F0100 1905662F0100 1905582F0100 140167FENI00 140170FEZN01 140169OT0000 140168FEZN00 606459FEZNA 606459FEZNA Denomination 190 BODY 1-5-PE 190 BODY L-N-PE 190 COVER CONTACT 3 TABS SCREW M6X11 TORX T20 BRIDGE 19mm GROUNDING PLATE SCREW 3.5X19 TORX T20 SCREW 3.5X19 TORX T20 660 1 1 4 4 1 1 DESCRIPTION 1 4 4 1 3,5 +/-0,5 2 1 RIF. 1 1 2 3 4 5 6 7 7 CODE 1 1 3,5 +/-0,5 1 3,5 +/-0,5 1 TB0190.05.03.01 TB190/5P/NF/WSA/WCK 1 4 4 1 TB0190.06.03.01 TB190/6PE/NF/WSA/BR4-5/WCK L-N *1.3Nm (+0.1/0) *1.3Nm (+0.1/0) *1.3Nm (+0.1/0) 3,5 +/-0,5 L 3 3,5 +/-0,5 PANEL CUT OUT THICKNESS: 0.7-1.5mm (**) alternative for grounding plate fixing 4 3,5 +/-0,5 40 ±0,1 L 5 3,5 +/-0,5 33,5 ±0,1 (**) 1 3 3 1 3,5 +/-0,5 L 1 5 5 2 1 1 3,5 +/-0,5 N 1 5 5 1 1 *1.3Nm (+0.1/0) 10 ±0,1 N 1 1 1 6 6 3 1 *1.3Nm (+0.1/0) 18,3 ±0,1 15,5 ±0,1(**) 10 ±0,1(**) 82,5 ±0,2 +0,3 50,5 0 1 1 1 6 6 2 *1.3Nm (+0.1/0) (*) Value for the the wiring connection. 1 TB0190.06.04.01 TB190/6P/NF/WSA/BR4-5/WCK L-N NOTES: -COVER: pulling force to remove: min. 50N -BRIDGE: when it is assembled on the terminal block, torque wrench setting: 2+0,1/-0 Nm (*) -GROUNDING PLATE: when it is assembled on the terminal block, torque wrench setting: 2+0,1/-0 Nm (*) -CONTACT FASTONS 6,3x0,8: according to EN 61210. Pull out force >80 N. -SCREW M6x11 T20: jointed with an 6mm2 wire inserted must withstand without any damage 5x an assembly/disassembly with an electric screw driver adjusted to 2+0,1/-0 Nm at 650 rpm. -SCREW 3,5x19 T20: jointed must withstand without any damage 5x an assembly/disassembly with an electric screw driver adjusted to 0,8+0,1/-0 Nm at 650 rpm. -Max wiring diameter 17mm -Min wiring diameter 9,5mm 1 TB0190.05.01.01 TB190/5PE/NF/WSA PART LIST 1 3 SEZIONE A-A ITW CODE: TB0190.06.00 Spessori : (Thickness) - Raggi : (Radius) - Q QUOTE FUNZIONALI Materiale (Material) Trattamento (Treatment) Superficie (Finishing) Colore (Color) Data (Date) Scala - (Scale) 1:1 Cap./Norma - - (Specifications) Peso (Weight) - Dis. Dis. 12/04/2012 Visto (Drn) (Checked) Chirumbolo EN60998-1 EN60998-2-1 EN61210 - P.D. - gr. PR190 Classe Funzionale - A1 Denominazione (Name) N° Disegno (Part. N°) TB190 BUILT IN TERMINAL BLOCK TB0190_DSP01 Esp. Mod. Mod. (Mod. N°) 0