Datasheet

VPX
(OpenVPX)
TR 90x/x1x
N - Series
3rd Generation
Intel® Core™ Processor
Single Board Computer
APPLICATIONS
The TR 90x/x1x is a PC-compatible high performance
systems defined by OpenVPX (VITA 65). For rugged
3U VPX processor board supporting the 3rd generation
applications VPX-REDI Type 1 and VPX-REDI Type 2
Intel® Core™ processors and the Mobile Intel® QM77
conduction- cooled versions are available. The board is
Express Chipset with up to 16 Gbytes of DDR3-1600 ECC
suitable for a range of applications within industrial
DRAM. The TR 90x/x1x features an optional XMC site
control, transport, aerospace, security and defense
and a range of I/O interfaces including two SATA600
applications. To simplify integration many standard
channels, dual 1000Base-BX, serial and USB
operating systems are supported.
interfaces. The board provides a flexible PCI Express®
(Gen 1 and Gen 2) backplane fabric interface for use in
HIGHLIGHTS
n 3U VPX (VITA 46.0) N-Series single board computer:
- air-cooled
- 0°C to +55°C operating temperature
- use in commercial (non-rugged) applications
- 3U VPX 0.8 inch slot or 1.0 inch slot
- optional rear transition module available
n Up to 2 x serial interfaces and up to 3 x USB interfaces
n Analog graphics via rear
n Configurable control plane fabric interface supports:
- 2 x SerDes (1000Base-BX) ports or
n Compatible with the FR 331/x06 VPX Switch
n
n I/O interfaces compatible with several OpenVPX profiles
n
n
rd
n 3 generation Intel® Core™ processor:
- 4-core 2.1 GHz Intel Core i7-3612QE processor
- 2-core 2.5 GHz Intel Core i7-3555LE processor
n Up to 16 Gbytes DDR3-1600 DRAM with ECC
n Configurable PCI Express® (PCIe) data plane fabric
interface supports:
8 x1 PCIe ports, 2 x4 PCIe ports,
1 x4 + 4 x1 PCIe ports or a 1 x8 PCIe port
support for Gen 1 and Gen 2
compatible with OpenVPX module profiles
supports up to six non-transparent links
n 2 x SATA600 mass storage interfaces
n Support for onboard SATA Flash Drive Module
-
CONCURRENT
TECHNOLOGIES
n
n
n
n
n
n
n
1 x SerDes plus 1 x Gigabit Ethernet ports or
2 x Gigabit Ethernet ports
IPMI (Intelligent Platform Management Interface)
Watchdog and long duration timers
Optional high definition stereo audio
Optional front panel I/O:
1 x USB, 1 x RS232, 1 x Gigabit Ethernet
Optional XMC module interface (with rear I/O):
XMC module interface (x8 PCI Express® Gen 2)
Optional security packages
Optional Built-In Test (BIT) supports:
Power-on BIT, Initiated BIT, Continuous BIT
Ruggedized conduction-cooled VPX-REDI versions (RCx-Series):
conduction-cooled to VITA 48.2, conformally coated
-40°C to +85°C operating temperature (at card edge)
Rear plug compatible with the popular TR 80x/x9x family
Support for Linux®, Windows® 7, Windows® Embedded Standard
7, Windows® XP, Windows® XP Embedded, QNX® and VxWorks®
-
Concurrent Technologies Plc
Concurrent Technologies Inc
4 Gilberd Court, Colchester, Essex, CO4 9WN, UK
Tel: +44 (0)1206 752626 Fax: +44 (0)1206 751116
6 Tower Office Park, Woburn, MA 01801, USA
Tel: (781) 933 5900 Fax: (781) 933 5911
email: [email protected]
http://www.gocct.com
Specification
Gigabit
Ethernet
1x
USB 3.0
SATA
Flash
Module
SPI
BIOS
Flash
Intel
82579
Central Processor
3rd Gen
x8
Intel
Core CPU
x4
Management
Controller
Board
Logic
SM0-1
SM2-3
(P0)
1x
RS232/
RS422/
RS485
Intel
82580DB
DRAM
n 1 x XMC site, in a single VPX slot (VITA 42.0):
è XMC (Switched Mezzanine Card) interface
supported by x8 PCI Express® Gen 2 (VITA 42.3)
è +5V or +12V powered (build option)
n rear XMC I/O configuration is changed by including
the HD audio build option:
è without the HD audio the XMC rear I/O is
P2w1-X24s+X8d+X12d (VITA 46.9)
è with the HD audio the XMC rear I/O is
P2w1-X18s+X8d+X12d (VITA 46.9)
è factory build option, please refer to the manual
Mass Storage Interfaces
n 2 x SATA600 interfaces via P1 connector:
è transfer rate up to 600 Mbytes/s
n optional SATA Flash Drive Module supports at least
8 Gbytes
Ethernet Interfaces
n factory build option for 2 x 1000 Mbps IEEE802.3z
SerDes (1000Base-BX) ports via P1:
è with software switchable option for
1 x 10/100/1000 Mbps Ethernet port (with
magnetics) plus 1 x SerDes port
n alternative factory build options for
2 x 10/100/1000 Mbps Ethernet ports:
è one port with and one port without magnetics or
è both ports with magnetics
è both ports without magnetics
n implemented by Intel® 82580DB Ethernet controller
n optional 10/100/1000 Mbps Ethernet:
è implemented using the Ethernet controller within
the PCH and via an Intel® 82579 PHY
è via RJ45 connector on front panel
Graphics Interface
n implemented by PCH
n analog VGA accessed via P2 rear I/O:
è resolutions up to 2048 x 1536 @ 75 Hz
n support for Microsoft® DirectX 10
n support for OpenGL 2.0 under Windows® and Linux
Serial Interfaces
n 1 x RS232/422/485 channel accessed via P1:
è supporting Tx/Rx CTS/RTS in RS-232 only
è supporting Transmit Control in RS-485 mode
n optional 1 x RS232 channel accessed via
front panel, full modem support
n 16550 compatible UARTs
ORDERING INFORMATION
x8
PCIe
Switch
+NTB +DMA
w1-w8
n up to 16 Gbytes DDR3-1600 ECC DRAM:
è soldered
è single bit error correction
è peak bandwidth of 25 Gbytes/s
è dual channel architecture
n accessible from processor or VPX fabric
XMC Interface
DDR3
DRAM
+ ECC
Mobile Intel Express Chipset
TPM
n 3rd generation Intel® Core™processors:
è 4-core 2.1 GHz Intel Core i7-3612QE processor
è 2-core 2.5 GHz Intel Core i7-3555LE processor
è up to 6 Mbytes of shared Last-Level on-die cache
n utilizes Mobile Intel® QM77 Express Chipset
MRAM
XMC Module
1x
RS232
n 3U VPX SBC (N-Series) utilizing the 3rd generation
Intel® Core™processor:
è air-cooled
è optional rear transition module
n compatible with several OpenVPX module profiles
n for ruggedized VPX-REDI (RCx-Series) versions:
è conduction-cooled to VITA 48.2
è -40°C to +85°C at card edge
è conformally coated
è see TR 90x/31x-RCx datasheet
XMC
VPX Single Board Computer
2x 2x
2 x 1000Base-BX
3 x Battery HD
Audio SATA USB
or
GPIO
(P2)
2.0 2 x Gigabit Ethernet
(P1/P2)
1 x8, 2 x4,
1 x4 + 4 x1,
8 x1
PCIe Fabric
VGA
P2w1-X24s
+X8d+X12d
(P2)
(P2)
(P1)
Stereo Audio
System Management
n optional Intel® High Definition Audio build option:
è requires suitable codec fitted to the Rear
Transition Module
n IPMI Version 1.5 via SM0-1 and SM2-3
n on-board BMC (Baseboard Management
Controller)
Optional Security Packages
Non-Volatile Memory
n Trusted Platform Module (TPM)
n proprietary security features:
è contact sales for further information
n 8 Mbytes of BIOS SPI Flash EPROM
n 128Kbytes MagnetoResistive RAM (MRAM)
VPX Backplane Interface
n typical current consumption (2.1 GHz Intel
Core i7-3612QE with 8 Gbytes DRAM):
è +5V @ 4.3A, voltage +5% / -2.5%
è +3.3V @ 5.0A, voltage +5% / -2%
è +3.3V AUX @ 0.2A, voltage +5% / -2%
n +12V AUX and -12V AUX routed to XMC site
n P0, P1 and P2 support OpenVPX configuration
n configurable PCI Express® (PCIe) fabric interface
supports:
è 8 x1 PCIe ports, 2 x4 PCIe ports,
1 x4 + 4 x1 PCIe ports, or a 1 x8 PCIe port
è support for Gen 1 and Gen 2
è compatible with OpenVPX module profiles
n supports up to six Non-Transparent Bridge (NTB)
links for multi-processing configurations
n two channel DMA engine for fast data block moves
n supported by Fabric Interconnect Networking
Software (FIN-S):
è see SW FNS/nnn datasheet
Other Peripheral Interfaces
n PC Real Time Clock
n long duration timer; watchdog timer
n CPU temperature monitor; voltages monitor;
accessed via System Management interface
n 2 x USB 2.0 interfaces accessed via P1
n optional 1 x USB 3.0 interface via front panel
n 3 x GPIO signals via P1 and P2
Software Support
n support for Linux®, Windows® 7, Windows®
Embedded Standard 7, Windows® XP, Windows® XP
Embedded, Windows® Server 2008, QNX® and
VxWorks®
Optional Built-In Test (BIT) Support
n Power-on BIT (PBIT)
n Initiated BIT (IBIT)
n Continuous BIT (CBIT)
Firmware Support
Electrical Specification
Safety
n PCB (PWB) manufactured with flammability
rating of 94V-0
Environmental Specification
n operating temperature (air-cooled):
è VITA 47 Class AC1, 0°C to +55°C
n storage temperature:
è VITA 47 Class C1, -40°C to +85°C
n operating altitude:
è 0 to 15,000 feet (0 to 4,572 meters)
n relative humidity (operating/storage):
è 5% to 95%, non condensing
Mechanical Specification
n 3U VPX form-factor (VITA 46.0, VITA 48.0)
n 3.9 inches x 6.3 inches (100mm x 160mm)
n optional slot widths:
è 0.8-inch (VITA 46.0)
è 1.0-inch (IEEE 1101.10 as per VITA 46.0)
è 1.0-inch (VITA 48.0 as per VITA 65)
n connectors to VITA 46.0 for P0, P1 and P2
n operating mechanical:
è shock - VITA 47 Class OS1, 20g
è random vibration - 0.002g²/Hz
Optional VPX Switch
n SBC compatible with FR 331/x06 VPX Switch
n Insyde Software InsydeH20™ BIOS:
è includes Compatibility Support Module
n based upon Intel® Platform Innovation Framework
for EFI
n comprehensive Power-On Self-Test (POST)
n LAN boot firmware included
Order Number
Product Description (Hardware)
TR 903/x1x-yz
TR 905/x1x-yz
2-core 3rd generation processor, N-Series
4-core 3rd generation processor, N-Series
For the order number suffix (yz) options please contact your local sales office:
where y = Ethernet I/O
where z = DRAM size; front I/O type
y - rear Ethernet configuration z - up to 16 Gbytes DRAM; front I/O
For accessories please contact your local sales office.
For further information on the VPX (N-Series) and VPX-REDI (RCx-Series) boards please contact your local sales office.
All companies and product names are trademarks of their respective organizations.
Specification subject to change; E and OE. RoHS 2002/95/EC compliant.
Datasheet Code 1688/0413
© Concurrent Technologies 2013