IRIS - Internal Rotary Inspection System
Transcript
IRIS - Internal Rotary Inspection System
IRIS www.img-us.com IRIS - Internal Rotary Inspection System APPLICATIONS • Tube inspection with ultrasound technique IMG ULTRASUONI srl via agli archi 8/c , 23826 Mandello del Lario (LC) ITALY Tel : +39 0341 733723 Fax : +39 0341 720004 [email protected] www.img-us.com REV.2 | 30/09/2013 IRIS www.img-us.com IRIS PRO is a very high speed data acquisition UT system, designed to be employed with any IRIS (Internal Rotary Inspection System) mechanics. The high end performance UT board used ensures top quality measurement and perfect adaptation to any IRIS probe. The software has been designed in order to satisfy the requirements raised from a pool of IRIS inspection field engineers. Simplicity, reliability and top end performances makes it a perfect field inspection tool. Being battery operated (optional) IRIS PRO allows unique flexibility in on site operation. The operating, reporting and data archiving software may be customized upon specific request. Some preview of the software GUI The setup procedure is very straightforward. All the necessary parameters to be set are displayed on only one page. The double A-Scan representation allows to properly set all the parameters in few clicks. The function of sum A-Scan on the wider area allows fast and reliable identification of pin, inner surface and outer surface echoes identification. IMG ULTRASUONI srl via agli archi 8/c , 23826 Mandello del Lario (LC) ITALY Tel : +39 0341 733723 Fax : +39 0341 720004 [email protected] www.img-us.com REV.2 | 30/09/2013 IRIS www.img-us.com Inspection and analysis layout The Side View (B-Scan) can be presented in black (just profile) or colored with the same palette logics of the C-Scan. The C-Scan and the B-Scan are displayed in real time at the same rotation rate of the turbine. The high performance real-time analysis UT board and the optimized software allow ultra fast rotation speed of the turbine ( > 50 rounds per second) still ensuring 360 measurements per rotation. All main controls: Main Gain, Pin Gain, Range, Nominal Tube Diameter, Minimum Thickness, Peak/Flank Measurement… are accessible on-the-fly even during scanning. The surpassing automatic files organization allows hassle-free archiving and dramatically enhances field operations. The free-licenced IRIS-VIEWER software allows off-line analysis of data and final report generation. The GUI can be adapted to specific needs (optional) standard probes and centering devices Higher diameter centering devices upon request, up to 8”. IMG ULTRASUONI srl via agli archi 8/c , 23826 Mandello del Lario (LC) ITALY Tel : +39 0341 733723 Fax : +39 0341 720004 [email protected] www.img-us.com REV.2 | 30/09/2013 IRIS www.img-us.com TECNICHAL SPECIFICATIONS UT board Software High performance board specifically • Powerful and easy to use IRIS-PRO sofware designed for IRIS inspection • Intuitive, user friendly interface DSP processor for real-time complex • Auto detection of reference pin echo analisys • Dual gain setting for front and back wall • 20 KHz PRF rate • High speed data analysis • 15 ns pulse transmission width • Maximum turbine rotation speed: 50 turns • 80 dB low noise amplifier • 30 Mhz bandwidth • Real-time C-Scan and B-Scan • 100 Mhz sampling rate • Powerful tube unique identification • Real-time DAC/TCG (Distance Amplitude • Possibility to add free comment notes to • • per second Correction) synchronized with the ID echo inspections for critical measurement of the back-wall • Cursors measurements echo • Versatile zoom features Real-time front and back wall Time Of • Automatic file name creation Flight measurement • Customizable colour palette • Real-time A-Scans transfer • Automatic report generation • Encoded C-Scan (optional) • B-Scan smoothing settable feature • Peli case enclosure available • Free postprocessing and data viewer • software • Lifetime software upgrade (optional) Reporting software can be customized (optional) IMG ULTRASUONI srl via agli archi 8/c , 23826 Mandello del Lario (LC) ITALY Tel : +39 0341 733723 Fax : +39 0341 720004 [email protected] www.img-us.com REV.2 | 30/09/2013