Tama v1 - World of FINAL FANTASY

Transcript

TAMA
Start with a square coloured side up.
1
3
2
Fold and unfold the square in half
diagonally along both axes. Then
turn the paper over left to right.
4
Fold the model in half diagonally.
5
Fold the corner up separate the
layers and squash flat.
Fold one corner in to the middle.
6
Fold and unfold the edges to the
middle.
Fold the top layer up causing the
sides to fold in.
WORLD OF FINAL FANTASY © 2016 SQUARE ENIX CO., LTD. All Rights Reserved.
CHARACTER DESIGN: TETSUYA NOMURA / YASUHISA IZUMISAWA.
Diagrams © 2016 Creaselightning Limited www.creaselightning.co.uk
7
8
9
(3-6)
1
Open the model back to a
square.
Repeat steps 3 to 6 on the other
side.
10
Refold the outer corner along the
creases made previously.
12
11
(9-11)
Fold point down to the right.
Fold the corner up.
14
13
Fold the sides behind.
Fold the edges in to the middle.
Repeat steps 9 to 11 on the other
side.
15
Fold and unfold the upper
section.
16
18
17
Fold out the edges and open
out the upper section.
19
Fold the section up
diagonally.
21
20
Fold the corner up. Separate the
layers and squash flat.
Fold the tip of the corner over.
Fold the edge down to the
crease made previously and
unfold..
Fold and unfold the upper section
along the middle.
23
22
Fold the section to the right.
24
Fold the upper section over.
Fold the edges of the upper layer
behind.
26
25
Fold the upper section down and
then up again making a zig zag fold.
27
Fold and unfold the lower section.
30
29
28
Fold the lower section up.
Fold the edges of the upper section
in between the creases.
31
32
Fold the opposite side over.
Turn the model over.
Fold the section back over and
reverse fold the edge behind.
Fold and unfold the edge down to
the lower edge.
33
Fold and unfold the lower
section up and down again.
35
34
36
(35)
Fold the lower corner and pinch the
corner together.
Turn the section inside out along
the creases made previously.
Fold the tail over and repeat step 35
on the other side.
38
37
Turn the model over left to right.
39
Complete.
Slide the ears out, separate the legs
slightly and open the tail.
Bows
1
3
2
Fold the model in half behind.
Fold and unfold the rectangle
in half.
4
6
5
Fold and unfold the outer edges
to the middle.
7
x2
Fold both sides in and out
again making zig-zag folds.
Fold one side over.
Rotate.
Complete. Make two and add them
to the model.
TAMA
CROWN
12 cm
19 cm
TAMA’s CROWN
Start with a square coloured side up.
1
3
2
Fold and unfold the outer edges
to the middle.
Fold and unfold the square in half
diagonally along both axes. Then
turn the paper over left to right.
4
6
5
90°
Fold and unfold between the
Fold and unfold between the
Rotate the model 90°.
(2-4)
Repeat steps 2 to 4.
7
8
up again making a zig zag fold.
10
9
up again making a zig zag fold.
12
11
14
Fold the corner back up.
Fold the sides in and out making a
zig zag fold. At the same time fold
the inner section down.
Fold the sides in and out again and
unfold.
13
Fold the upper corner behind.
15
Reverse fold out the
trapped paper.
16
18
17
Fold the upper corner
down.
Fold the corners over.
19
21
20
Fold the corner up.
22
Fold the edge over.
Fold the lower corner up.
24
23
Fold the edge up again.
Fold the corners in.
Tuck one end into the other and
connect the two ends together.
Crown complete.
TAMA’S CROWN
TAMA

Tama v1 - World of FINAL FANTASY

Transcript

Documenti analoghi

World Time Zone Chart

FINAL FANTASY Series Achieves Over 100 Million

RHINOPLASTY INTERNATIONAL DISSECTION COURSE

Coording error

WE MATTER WHAT THE FUTURE BRINGS CALL FOR PAPERS

EUROPEAN COMMISSION Brussels, 26.01.2016 Subject

letters

F - hn.org

MITROPA CUP 2016

Popup Workshop: Computationally Enhanced Paper Engineering for