VXE - Plastic Systems
Transcript
VXE - Plastic Systems
VXE VXE Sistema di etichettatura personalizzabile Easyfit Tappo trasparente con porta etichette Easyfit Custom Labelling System Transparent service plug with tag holder Stelo e sfera di tipo flottante ad alta finitura superficiale High finishing stem and floating ball Supporto tenute sfera Safe blocked carrier Montaggio radiale secondo EN 1452 “short” True union installation according to EN 1452 “short” VXE maniglia multifunzione Easyfit Comando rotazione ghiere easyfit multifunctional handle Union nut rotation control Regolazione supporto tenute e sfera Ball seat carrier adjustment Regolazione del serraggio delle ghiere Easyfit Easyfit union nut gear tightening Corpo valvola PN16 PVC-U K62 e PVC-C CorzanTM Certificata 97/23/CE Valve body PN16 PVC-U K62 and PVC-C CorzanTM 97/23/CE Certified VXE FIP e Giugiaro Design hanno progettato e sviluppato VX Easyfit , l’ultima evoluzione di prodotto nel campo delle valvole a sfera realizzate in materiale termoplastico. VX Easyfit è una innovativa valvola a sfera a smontaggio radiale con regolazione del serraggio delle ghiere, che consente una installazione semplice e sicura per un servizio affidabile nel tempo. FIP and Giugiaro Design have designed and developed VX Easyfit, the last product evolution in the thermoplastic ball valve manufacturing technology. VX Easyfit is the innovative true union gear ball valve introducing an advanced method of installation for a long trouble free service. Easyfit System The principle of the bevel gear pair has been applied to design the Easyfit mechanism that controls the rotation of the union nuts during the valve installation. Thanks to the reducing ratio of the torque, the valve union nuts are easily and safely tightened or un-tightened without over stressing the threaded components of the valves and the pipeline jointing fittings. The Easyfit mechanism can be very useful in a wide range of pipeline layout, especially in narrow spaces, because the stem of the valve is the pivot of the bevel gearing. Sistema Easyfit Easyfit è l’innovativo meccanismo basato sulla cinematica delle ruote dentate coniche, che comanda la rotazione delle ghiere durante l’installazione della valvola. Grazie ad un favorevole rapporto di riduzione delle forze, le ghiere vengono serrate in modo sicuro e controllato durante il montaggio ed il collegamento della valvola alla tubazione e vengono allentate in maniera analoga durante le operazioni di smontaggio. Easyfit risulta particolarmente efficace in quanto il fulcro di rotazione della coppia conica è lo stelo di manovra, componente facilmente accessibile in qualunque configurazione di impianto. Le ghiere ruotano tramite la maniglia di manovra multifunzione o tramite la chiave dinamometrica Easytorque posizionate direttamente sull’asse dello stelo. L’uso della chiave dinamometrica è sempre raccomandato quando si vogliano calibrare le coppie di serraggio delle ghiere per evitare la distorsione delle tenute elastomeriche e ridurre gli sforzi meccanici sulle filettature termoplastiche. La maniglia multifunzione risulta, invece, estremamente utile nelle operazioni di manutenzione, ove si operi in spazi limitati e di difficile accessibilità. Il suo uso è comunque sempre consigliato poiché garantisce una perfetta tenuta idraulica grazie alla graduale compressione delle guarnizioni O-ring ed evita il danneggiamento accidentale delle ghiere che può essere causato dall’impiego di attrezzi non idonei. The Easytorque wrench or the valve multifunctional handle are the power driving tools to be placed on the stem axis and used to turn the union nuts. Easytorque wrench is recommended whenever the tightening torque of the union nut must be set and recorded in order to prevent distortion of the elastomeric seals and to reduce the mechanical stress of the plastic threads. The use of the multifunctional handle is the best solution to carry out maintenance operations in narrow spaces with limited access to the valve location but it is always recommended to grant a gradual compression of O-ring seals and to avoid non specific tools causing union nut damaging or fluid leakage. VxE Corpo valvola Valve body La valvola a sfera VX Easyfit è stata interamente progettata utilizzando l’analisi agli elementi finiti delle tensioni e deformazioni (FEM) e viene prodotta in PVC-U K62 e PVC-C CorzanTM, sfruttando le più recenti tecnologie di stampaggio per iniezione. Questa valvola garantisce pressioni di esercizio fino a 16 bar a 20 °C in accordo alla norma ISO 9393 ed è conforme alla Direttiva Europea 97/23/CE per attrezzature a pressione PED, certificata dall’istituto Pascal (1115). Le dimensioni e le quote di installazione della valvola rispondono ai requisiti delle normative internazionali ISO 7508 “Serie III” ed europee EN 1452”short”. Il corpo valvola è realizzato per il montaggio radiale sulle tubazioni ed è garantita la completa intercambiabilità con i precedenti modelli di valvole a sfera FIP serie VX o VB. VX Easyfit ball valve has been designed through the stress and strain analysis (FEM) and is made of PVC-U K62 and PVC-C CorzanTM resin employing the most up to date injection moulding technology. The valve can withstand working pressure up to 16 bar at 20 °C according to ISO 9393 International Standards and complies the European Directives 97/23/CE for pressure equipments PED, certified by the Pascal Institute (1115). Installation and overall dimensions are in accordance with the requirements of ISO 7508 “Series III” International Standards and EN 1452 “ Short” European Standards. The valve body is designed for true union installation and is fully interchangeable with the previous FIP ball valves models type VX and type VB. Ball seat design Configurazione delle tenute della sfera La valvola è dotata di supporto regolabile delle tenute della sfera direttamente avvitato al corpo valvola. Il supporto garantisce adeguata sicurezza durante le operazioni di manutenzione, quando occorra smontare le ghiere dal corpo valvola in presenza di fluidi all’interno delle tubazioni. La regolazione e la rimozione del supporto stesso sono agevolmente effettuabili tramite l’impiego della maniglia multifunzione in dotazione alla valvola. Le tenute della sfera sono in PTFE, mentre le guarnizioni tipo O-ring, in EPDM o FPM, sono idonee al convogliamento di acqua e molti altri fluidi compatibili. The VX Easyfit ball valve is equipped with a safe blocked and adjustable ball seat carrier. The carrier is made in one piece and screwed into the valve body. During maintenance in depressurized pipelines it is possible to unscrew one single union nut and disconnect the downstream or the upstream pipe end from valve body with valve in closed position, without fluid leakage. The ball seat carrier should be removed only with the multifunctional handle, which also grants the ball seats adjustment. Ball seats are made by compression moulding of PTFE and the EPDM or FPM O-ring seals are suitable to convey water and harmless fluids. Connessione stelo-sfera Stem ball connection La valvola VX Easyfit prevede l’utilizzo di otturatori sferici di tipo flottante. La sfera e lo stelo di manovra sono realizzati in centri di lavoro CNC per ottenere precise tolleranze dimensionali ed elevate finiture con totale assenza di imperfezioni superficiali dalle zone di tenuta. I componenti della valvola sono assemblati in isole di lavoro robotizzate e le tenute della valvola totalmente controllate con aria pressurizzata. The VX Easyfit ball valve is designed with floating ball obturating system. The valve stem and ball are fully machined after moulding by automatic CNC tool-machines achieving high surface finishing, removing all possible surface imperfections and giving accurate dimensional tolerances. All valve components are fully robotic assembled and the complete valve is air tested in open and closed position. VxE Personalizzare Customize VX Easyfit VX Easyfit Spesso si rende necessario personalizzare una valvola It is often necessary to customize a valve by labelling or per poterla identificare in funzione di specifiche esigenze. tagging it in order to mark, protect and identify it. Le valvole VX Easyfit sono dotate perciò, di un modulo plastico, resistente all’acqua, appositamente disegnato per la personalizzazione del prodotto tramite etichettatura. 1 - Tappo di protezione trasparente in PVC-U Trasparent PVC-U service plug 2 - Piastrina porta etichette di PVC-U PVC-U Tag holder NaOH 1 2 FILTER BACK WASH BV 145-23 3 COLD WATER TO GAS HEATER THERME MERAN TERME MERANO VX Easyfit valves are therefore equipped with a plastic water-resistant module specially designed to meet this specific need. The module housed in the handle, is made by a transparent PVC service plug and a white circle tag Il modulo è alloggiato nella maniglia ed è composto holder, FIP branded on one side. da un tappo di PVC rigido trasparente e da una piastrina The tag holder is embedded in the plug and can be easily bianca dello stesso materiale, su un lato della quale removed to be used for self labelling on its blank side. è riportato il marchio FIP. Self labelling can be done in several ways, but we recommend to design and print custom labels through Easyfit Labelling System. Easyfit Labelling System is a complete product line created to customize each single Easyfit valve. 3 - Maniglia multifunzione Easyfit Easyfit Multifunctional handle La piastrina, inserita all’interno del tappo, può essere rimossa e, una volta capovolta, utilizzata per per essere personalizzata direttamente o tramite applicazione di etichette. Per creare e stampare etichette personalizzate sono disponibili i set LSE To make your own custom label for VX Easyfit valve model, della linea di prodotti Easyfit Labelling System. you need to use the LSE Set. I set LSE contengono speciali etichette circolari autoadesive pre-fustellate su fogli di polietilene, formato A4. Nella confezione è incluso anche il CD-Rom con il software per la composizione delle etichette e la gestione delle stampanti. The LSE set includes circle labels die cut on white polyethylene self-adhesive A4 sheets and a CD-Rom with the label design and printer management software. LSE Sets are available packed by valve size form from d20 to d63. VxE Dati tecnici Technical Data Variazione della pressione in funzione della temperatura per acqua o fluidi non pericolosi nei confronti dei quali il materiale è classificato CHIMICAMENTE RESISTENTE. In altri casi è richiesta un’adeguata diminuzione della pressione nominale PN. (25 anni con fattore sicurezza). PVC-U pressione di esercizio - working pressure 16 0 20 40 60 PVC-C 80 100 °C -20 16 DN 10 ÷ 50 14 12 10 8 6 4 2 0 temperatura di esercizio - working temperature 1 10 bar 100 pressione di esercizio - working pressure -20 Pressure/temperature rating for water and harmless fluids to which the material is RESISTANT. In other cases a reduction of the rated PN is required. (25 years with safety factor). 0 20 40 60 80 100 °C DN 10 ÷ 50 14 12 10 8 6 4 2 0 temperatura di esercizio - working temperature 1000 10000 l/min perdita di carico -pressure loss 1 0,1 0,01 0,001 portata - flow rate Coefficiente di flusso kv100 Per coefficiente di flusso kv100 si intende la portata Q in litri al minuto di acqua a 20°C che genera una perdita di carico p=1 bar per una determinata apertura della valvola. I valori kv100 indicati in tabella si intendono per valvola completamente aperta. Flow coefficient kv100 Kv100 is the number of liters per minute of water at a temperature of 20°C will flow through a valve at 1 bar differential pressure at a specified rate. The Kv100 values shown in the tables are calculated with the valve completely open. d 16 20 25 32 40 50 63 DN 10 15 20 25 32 40 50 Kv100 80 200 385 770 1100 1750 3400 VXE – PVC-U Dimensioni Dimensions VXEIV Valvola a sfera Easyfit con attacchi femmina per incollaggio serie metrica. VXEIV Ball valve Easyfit with metric series plain female ends for solvent welding. d DN PN L Z H E B C 16 20 25 32 40 50 63 10 15 20 25 32 40 50 16 16 16 16 16 16 16 14 16 19 22 26 31 38 54 50 53 59 68 77 98 82 82 91 103 120 139 174 54 54 63 72 85 100 118 49 49 62 71 82 92 110 64 64 78 87 102 109 133 C1 g 20 180 20 175 23 260 27 365 30 565 33 795 39 1325 Code EPDM VXEIV016E VXEIV020E VXEIV025E VXEIV032E VXEIV040E VXEIV050E VXEIV063E Code FPM VXEIV016F VXEIV020F VXEIV025F VXEIV032F VXEIV040F VXEIV050F VXEIV063F VXEFV VXEFV Valvola a sfera Easyfit con attacchi femmina, Ball vavle Easyfit with BS parallel threaded filettatura cilindrica gas. female ends. R DN PN 3/8" 1/2" 3/4" 1" 1 1/4" 1 1/2" 2" 10 15 20 25 32 40 50 16 16 16 16 16 16 16 L Z H E B C 11,4 59,2 15 60 16,3 60,4 19,1 71,8 21,4 84,2 21,4 88,2 25,7 109,6 82 90 93 110 127 131 161 54 54 63 72 85 100 118 49 49 62 71 82 92 110 64 64 78 87 102 109 133 C1 g 20 180 20 175 23 260 27 365 30 565 33 795 39 1325 Code EPDM VXEFV038E VXEFV012E VXEFV034E VXEFV100E VXEFV114E VXEFV112E VXEFV200E Code FPM VXEFV038F VXEFV012F VXEFV034F VXEFV100F VXEFV114F VXEFV112F VXEFV200F VXELV VXELV Valvola a sfera Easyfit con attacchi femmina Ball vavle Easyfit with BS series plain female ends per incollaggio serie BS. for solvent welding. d DN PN L Z H E B C 1/2" 3/4" 1" 1 1/4" 1 1/2" 2" 15 20 25 32 40 50 16 16 16 16 16 16 16,5 19 22,5 26 30 36 49 53 58 68 79 102 82 91 103 120 139 174 54 63 72 85 100 118 49 62 71 82 92 110 64 78 87 102 109 133 C1 g 20 175 23 260 27 365 30 565 33 795 39 1325 Code EPDM VXELV012E VXELV034E VXELV100E VXELV114E VXELV112E VXELV200E Code FPM VXELV012F VXELV034F VXELV100F VXELV114F VXELV112F VXELV200F VXE – PVC-U Dimensioni Dimensions VXEAV Valvola a sfera Easyfit con attacchi femmina per incollaggio serie ASTM. VXEAV Ball valve Easyfit with ASTM series plain female ends for solvent welding d DN PN L Z H E B C 1/2" 3/4" 1" 1 1/4" 1 1/2" 2" 15 20 25 32 40 50 16 16 16 16 16 16 22,5 25,5 28,7 32 35 38,2 51 54 59,5 72 77 97,6 96 105 117 136 147 174 54 63 72 85 100 118 49 62 71 82 92 110 64 78 87 102 109 133 C1 g 20 175 23 260 27 365 30 565 33 795 39 1325 Code EPDM VXEAV012E VXEAV034E VXEAV100E VXEAV114E VXEAV112E VXEAV200E Code FPM VXEAV012F VXEAV034F VXEAV100F VXEAV114F VXEAV112F VXEAV200F VXENV VXENV Valvola a sfera Easyfit con attacchi femmina, Ball vavle Easyfit with NPT threaded filettatura NPT. female ends. R DN PN 1/2" 3/4" 1" 1 1/4" 1 1/2" 2" 15 20 25 32 40 50 16 16 16 16 16 16 L Z H E B C 17,8 54,4 18 57 22,6 64,8 25,1 76,8 24,7 81,6 29,6 101,8 90 93 110 127 131 161 54 63 72 85 100 118 49 62 71 82 92 110 64 78 87 102 109 133 C1 g 20 175 23 260 27 365 30 565 33 795 39 1325 Code Code EPDM FPM VXENV012E VXENV012F VXENV034E VXENV034F VXENV100E VXENV100F VXENV114E VXENV114F VXENV112E VXENV112F VXENV200E VXENV200F VXEJV VXEJV Valvola a sfera Easyfit con attacchi femmina Ball vavle Easyfit with JIS series plain female ends per incollaggio serie JIS. for solvent welding. d DN PN L Z H E B C 1/2" 3/4" 1" 1 1/4" 1 1/2" 2" 15 20 25 32 40 50 16 16 16 16 16 16 30 35 40 44 55 63 50 53 59 68 77 102 110 123 139 156 187 228 54 63 72 85 100 118 49 62 71 82 92 110 64 78 87 102 109 133 C1 g 20 175 23 260 27 365 30 565 33 795 39 1325 Code EPDM VXEJV012E VXEJV034E VXEJV100E VXEJV114E VXEJV112E VXEJV200E Code FPM VXEJV012F VXEJV034F VXEJV100F VXEJV114F VXEJV112F VXEJV200F VXE – PVC-U VxE Dimensioni Dimensions VXEGV Valvola a sfera Easyfit con attacchi femmina, filettatura JIS. R DN PN L Z 1/2" 3/4" 1" 1 1/4" 1 1/2" 2" 15 20 25 32 40 50 16 16 16 16 16 16 16 19 22 25 26 31 50 53 59 70 87 112 VXEGV Ball valve Easyfit with JIS threaded female ends. . H E B C 82 91 103 120 139 174 54 63 72 85 100 118 49 62 71 82 92 110 64 78 87 102 109 133 C1 g 20 175 23 260 27 365 30 565 33 795 39 1325 Code Code EPDM FPM VXEGV012E VXEGV012F VXEGV034E VXEGV034F VXEGV100E VXEGV100F VXEGV114E VXEGV114F VXEGV112E VXEGV112F VXEGV200E VXEGV200F VXEBEV VXEBEV Valvola a sfera Easyfit con connettori maschio in PE100 SDR11 Ball vavle Easyfit with PE100 SDR11 metric series long per saldatura testa a testa o per elettrofusione (CVDE*). spigot ends for butt fusion or electrofusion (CVDE*). d 20 25 32 40 50 63 DN L Z H E B C 15 41 20 52 25 54,5 32 56 40 58 50 66 72 82 90 105 120 136 154 186 199 217 236 268 54 63 72 85 100 118 49 62 71 82 92 110 64 78 87 102 109 133 * Connettori CVDE venduti separati come accessorio. C1 g 20 180 23 269 27 379 30 591 33 851 39 1407 Code EPDM VXEBEV020E VXEBEV025E VXEBEV032E VXEBEV040E VXEBEV050E VXEBEV063E * CVDE end connectors supplied separately as accessories. Code FPM VXEBEV020F VXEBEV025F VXEBEV032F VXEBEV040F VXEBEV050F VXEBEV063F VXE – PVC-C Dimensioni Dimensions VXEIC VXEIC Valvola a sfera Easyfit con attacchi femmina Ball valve Easyfit with metric series plain female ends per incollaggio serie metrica. for solvent welding. d DN PN L Z H E B C 20 25 32 40 50 63 15 20 25 32 40 50 16 16 16 16 16 16 16 19 22 26 31 38 50 53 59 68 77 98 82 91 103 120 139 174 54 63 72 85 100 118 49 62 71 82 92 110 64 78 87 102 109 133 C1 g 20 175 23 260 27 365 30 565 33 795 39 1325 Code EPDM VXEIC020E VXEIC025E VXEIC032E VXEIC040E VXEIC050E VXEIC063E Code FPM VXEIC020F VXEIC025F VXEIC032F VXEIC040F VXEIC050F VXEIC063F VXEAC VXEAC Valvola a sfera Easyfit con attacchi femmina Ball vavle Easyfit with ASTM series plain female ends per incollaggio serie ASTM. for solvent welding. d DN PN L Z H E B C 1/2" 3/4" 1" 1 1/4" 1 1/2" 2" 15 20 25 32 40 50 16 16 16 16 16 16 22,5 25,5 28,7 32 35 38,2 51 54 59,5 72 77 97,6 96 105 117 136 147 174 54 63 72 85 100 118 49 62 71 82 92 110 64 78 87 102 109 133 C1 g 20 175 23 260 27 365 30 565 33 795 39 1325 Code EPDM VXEAC012E VXEAC034E VXEAC100E VXEAC114E VXEAC112E VXEAC200E Code FPM VXEAC012F VXEAC034F VXEAC100F VXEAC114F VXEAC112F VXEAC200F Code EPDM VXENC012E VXENC034E VXENC100E VXENC114E VXENC112E VXENC200E Code FPM VXENC012F VXENC034F VXENC100F VXENC114F VXENC112F VXENC200F VXENC VXENC Valvola a sfera Easyfit con attacchi femmina, Ball valve Easyfit with NPT threaded filettatura NPT. female ends. R DN PN 1/2" 3/4" 1" 1 1/4" 1 1/2" 2" 15 20 25 32 40 50 16 16 16 16 16 16 L Z H E B C 17,8 54,4 18 57 22,6 64,8 25,1 76,8 24,7 81,6 29,6 101,8 90 93 110 127 131 161 54 63 72 85 100 118 49 62 71 82 92 110 64 78 87 102 109 133 C1 g 20 175 23 260 27 365 30 565 33 795 39 1325 VxE Maniglia multifunzione Multi functional handle La valvola VX Easyfit è dotata di una maniglia di manovra progettata e realizzata per eseguire un avanzato numero di funzioni. La maniglia, oltre a garantire un’ottima manovrabilità, è caratterizzata da un ingombro ridotto ed è uno dei componenti principali del meccanismo di regolazione del serraggio delle ghiere Easyfit. La maniglia, infatti, può essere estratta dallo stelo ed inserita nuovamente sullo stesso in posizione capovolta, dopo aver rimosso il tappo di protezione. Si ottiene così un ingaggio con l’ingranaggio presente sulla ghiera e si può procedere al serraggio o allo svitamento della ghiera stessa tramite la semplice rotazione della maniglia. La maniglia può anche essere usata come attrezzo per lo smontaggio, il montaggio o la regolazione del supporto delle tenute della sfera. Per questa funzione, occorre rimuovere la maniglia dallo stelo di manovra e posizionare gli appositi inserti presenti sulla sua parte inferiore, nelle opportune sedi ricavate nel supporto e procedere all’avvitamento o allo svitamento del supporto stesso. The new VX Easyfit handle is designed to make advanced service functions. The compact design handle provides very good manoeuvrability and is one of the core components of the nut gear tightening Easyfit. The handle can be removed from valve stem, turned upside down and repositioned on the stem after pulling out the service plug. Pawls of nut gear are easily engaged and it is possible to tighten or un-tighten the union nut simply rotating the handle. VX Easyfit handle is also provided with moulded-in inserts that allow the user to dismount, install or adjust the ball seat carrier into the valve body. The handle should be removed from the stem and used as a tool to screw or unscrew the ball seat carrier after engaging the inserts into the carrier. No need for additional tool. VX Easyfit handle is fully compatible with all the products of Easyfit Labeling System. The handle incorporates the transparent service plug with tag holder LCE Module. For more information please, refer to the technical leaflet Easyfit Labelling System. Si ricorda che la maniglia VX Easyfit è predisposta per l’utilizzo del sistema di etichettatura e identificazione Easyfit Labeling System in quanto alloggia il tappo trasparente con porta etichette del Modulo LCE. Per maggiori informazioni consultare la relativa documentazione tecnica Easyfit Labeling System. LEIVXEPROM - 09 - 2009 FIP Formatura Iniezione Polimeri Loc. Pian di Parata 16015 Casella Genova Italy tel. +39 010 9621.1 fax +39 010 9621.209 [email protected] www.fipnet.it