LAN recorder 4/8/16 cameras
Transcript
LAN recorder 4/8/16 cameras
LAN recorder 4/8/16 cameras Guida Rapida • Quick Start Guide LE04260AC-12W12 391 515/516/517 LAN recorder 4/8/16 cameras 2 IT ITALIAN 3 UK ENGLISH 23 Indice 1 2 Contenuto Dell’imballaggio.................................................................................... 4 Ubicazioni E Comandi.............................................................................................. 5 2.1 2.2 2.3 2.4 2.5 2.6 2.7 391 515 Pannello Anteriore.................................................................................................... 4 391 515 Pannello Posteriore.................................................................................................. 6 391 516/391 517 Pannello Anteriore ................................................................................... 7 391 516/391 517 Pannello Posteriore.................................................................................. 8 Collegamento Di Una Telecamera Dome Motorizzata, Di Un’uscita Allarme O Di Un Sensore.................................................................................. 9 Telecomando ................................................................................................................. 11 Comando Dal Mouse............................................................................................................... 13 3 Funzionamento Di Base E Configurazione Dei Menu ....................................... 15 3.1 3.2 3.3 3.4 3.5 Menu Principale .................................................................................................................... 15 Configurazione Del Sistema ............................................................................................................16 Modalità Lettura....................................................................................................................... 17 Configurazione Ptz E Rs-485.................................................................................................. 18 Modalità Ptz.............................................................................................................................. 19 3 Guida Rapida Registratore LAN 4/8/16 telecamere 1 Contenuto Dell’imballaggio 1. Registratore video digitale 2. CD d'installazione, software Client Viewer 5. Cavo di alimentazione 3. Manuale d'uso 6. Adattatore settore 4. Telecomando 7. Batterie 8. Connettore Sub-D (DB25) femmina IT Istruzioni per la sicurezza Il prodotto deve essere installato attenendosi alle regole di installazione, preferibilmente da parte di un elettricista qualificato. L’installazione e l’utilizzo scorretti possono comportare rischi di scossa elettrica o incendio. Prima di effettuare l’installazione, leggere le istruzioni e prendere in considerazione il luogo specifico in cui il prodotto sarà montato. Non aprire, smontare, alterare o modificare il dispositivo salvo specificatamente richiesto dalle istruzioni. Tutti i prodotti Bticino devono essere aperti e riparati esclusivamente da personale qualificato ed approvato da Bticino. Qualsiasi eventuale apertura o riparazione non autorizzata causerà l’annullamento di ogni responsabilità, diritto di sostituzione e garanzia. Utilizzare esclusivamente accessori di marca Bticino. 4 2 Ubicazioni E Comandi 2.1 391 515 Pannello Anteriore Comando Descrizione Esce dalla schermata del menu e dalle varie funzioni. Accede al menu di back-up. 1 ESC/BACKUP 2 SEARCH Accede alla schermata del menu di ricerca. Utilizzare i tasti alto/basso per navigare. Premere 17 (ENTER) per accedere all'elemento desiderato. 3 PIP Attiva il formato "immagine nell'immagine". Utilizzare i tasti alto/basso per navigare. Premere 17 ( ) per accedere all'elemento desiderato. 4 ZOOM Attiva o disattiva la funzione zoom. Premere 17 (ENTER) per cambiare canale. 5 AUTO Attiva la modalità Sequenziale definita dai parametri SPOT. 6 SPIA REC 7 SPIA POWER 8 USB 2.0 9 REC Lancia/arresta una registrazione 10 PLAY Lancia la lettura. 11 12 13 14 MENU/PAUSE ( Spia di registrazione. Indica che il registratore è alimentato. La porta USB 2.0 può essere utilizzata per collegare un mouse USB o un dispositivo di memorizzazione USB. ) SENSORE IR Sensore IR dei segnali del telecomando TASTO DIREZ. DESTRA / AVANZAMEN- Tasto direzionale Destra. TO RAPIDO ( ) Avanzamento rapido, velocità: 2x, 4x, 8x, 16x, 32x, 64x. TASTO DIREZ. ALTO / RALLENTATORE ( ) 15 TASTO DIREZ. BASSO / STOP ( ) 16 TASTO DIREZ. SINISTRA / RIAVVOLGIMENTO RAPIDO ( ) 17 Accede alla modalità Menu. Utilizzare i tasti alto/basso per navigare nella schermata del menu. Consente di mettere in pausa la lettura. ENTER/MODE ( ) Tasto direzionale Alto. Avanzamento al rallentatore, velocità: 1/2x, 1/4x, 1/8x, 1/16x e immagine/immagine. Tasto direzionale Basso. Consente di arrestare la lettura. Tasto direzionale Sinistra. Riavvolgimento rapido, velocità: 2x, 4x, 8x, 16x, 32x, 64x. Passa in modalità Schermo interno o consente di frazionare lo schermo in 4 (schermo quadruplo). Consente di convalidare una selezione. 5 Guida Rapida Registratore LAN 4/8/16 telecamere In modalità Visualizzazione diretta, i tasti 13 - 14 - 15 e 16 consentono di configurare gli schermi PIP e di attivare il suono sulla telecamera: 6 2.2 391 515 Pannello Posterior 1 INGRESSO VIDEO 2 USCITA VGA 3 INGRESSO AUDIO 4 RS485/RELÈ/SENSORE 5 COLLEGAMENTO RETE 9 USB 6 ALIMENTAZIONE 1 2 3 4 5 6 8 USCITA AUDIO 7 USCITA VIDEO/SPOT Elemento RS485DRelè1_CM TERRA SENSORE2 SENSORE4 TERRA 14 15 16 17 18 9-13, 21-25 RS485 D+ RELÈ1_ND RELÈ1_NC SENSORE1 SENSORE3 Descrizione 1 INGRESSI VIDEO Ingressi 4 x BNC. Collegamento di 4 telecamere analogiche. 2 USCITA VGA Uscita per un monitor VGA. 3 INGRESSO AUDIO Ingresso RCA per il segnale audio. 4 RS485/RELÈ/SENSORE Connettore Sub-D (DB25) maschio, ingressi e uscite per collegare le telecamere PTZ, relè e allarmi (consultare il paragrafo 2.5 per i collegamenti). 5 COLLEGAMENTO RETE Collegamento alla LAN, presa RJ45. 6 ALIMENTAZIONE CC 12 V. 7 USCITA VIDEO/SPOT Uscita BNC per monitor analogico, che consente anche una visualizzazione sequenziale delle telecamere (in modalità SPOT). 8 USCITA AUDIO Uscita RCA per un segnale audio. 9 USB Porta USB per collegare una periferica (mouse, hard disk esterno, chiavetta USB, ecc.). Nota: Dopo che l’uscita video è configurata in modalità Spot, non è più possibile utilizzare lo schermo per disattivare questa funzione. A questo punto si deve collegare uno schermo supplementare all’uscita VGA. 7 Guida Rapida Registratore LAN 4/8/16 telecamere 2.3 391 516/391 517 Pannello Anteriore Comando Descrizione 1 Ubicazione masterizzatore CD/DVD Funzione non disponibile. 2 SENSORE IR Sensore IR dei segnali del telecomando. 3 EJECT Funzione non disponibile. 4 USB 2.0 La porta USB 2.0 può essere utilizzata per collegare un mouse USB o un dispositivo di memorizzazione USB. 5 Tasti numerici Selezionano una telecamera (utilizzare il tasto "+10" per le telecamere da 10 a 16) e consentono di digitare numeri. 6 LOCK Blocca i tasti del pannello anteriore (ON/OFF). 7 PTZ Menu Pan/Tilt/Zoom (panoramica/verticale/zoom). 8 REC Lancia/arresta una registrazione. 9 SPIE POWER: indica che il DVR è alimentato. LAN: spia della rete. HDD: lettura /scrittura sull'hard disk. 10 TASTO DIREZ. SINISTRA / RIAVVOLGIMENTO RAPIDO ( 11 TASTO DIREZ. ALTO / RALLENTATORE ( ) Tasto direzionale Alto. Avanzamento al rallentatore, velocità: 1/2x, 1/4x, 1/8x, 1/16x. 12 TASTO DIREZ. DESTRA / AVANZAMENTO RAPIDO ( Tasto direzionale Destra. Avanzamento rapido, velocità: 2x, 4x, 8x, 16x, 32x, 64x. 13 TASTO DIREZ. BASSO / STOP ( 14 PLAY Lancia la lettura. 15 SEARCH Accede alla schermata del menu di ricerca. Utilizzare i tasti alto/basso per navigare. 16 ESC/BACKUP Esce dalla schermata del menu e dalle varie funzioni. Accede al menu di back-up. 17 ENTER/MODE ( 18 MENU/PAUSE ( Tasto direzionale Sinistra. Riavvolgimento rapido, velocità: 2x, 4x, 8x, 16x, 32x, 64x. ) ) ) Tasto direzionale Basso. Arresta la lettura. Tasto di convalida. Visualizza in ciclo tutte le telecamere a schermo intero, poi in schermo multiplo. ) ) Accede alla modalità Menu. Utilizzare i tasti alto/basso per navigare nella schermata del menu. Mette in pausa la lettura. 19 MUTE Attiva gli ingressi audio o la modalità Silenzio. 20 AUTO Attiva la modalità Sequenziale. Passa in ciclo le telecamere. 21 FREEZE Congela l'immagine (ON/OFF) in modalità Visualizzazione diretta. 22 ZOOM Attiva o disattiva la funzione zoom che raddoppia le dimensioni dell'immagine visualizzata sullo schermo. Premere 17 ( ) per cambiare canale. 23 STATUS (stato) Visualizza la versione del software, l'indirizzo IP, l'indirizzo MAC e lo stato dell'hard disk (Menu DIAGNOSTICA) 24 PIP Attiva il formato "immagine nell'immagine". Utilizzare i tasti alto/basso per navigare. 25 MULTI CH1->...CH16->CH1-4->CH5-8->CH9-12->CH13-16->CH1-9->CH8-16>CH1-13->CH1-16 In modalità Visualizzazione diretta, i tasti 13 - 14 - 15 e 16 consentono di configurare gli schermi PIP (vedere figura pagina 5). 8 2.4 391 516/391 517 Pannello Posteriore Registratore a 8 canali 1 TELECAMERA 1-8 2 INGRESSO AUDIO 3 COLLEGAMENTO RETE 4 USCITA VGA 5 ALIMENTAZIONE 8 USCITA USB 9 RS485/RELÈ/SENSORE 7 USCITA AUDIO 6 USCITA VIDEO/SPOT Registratore a 16 canali 1 TELECAMERA 1-16 Nota: Dopo che l’uscita video è configurata in modalità Spot, non è più possibile utilizzare lo schermo per disattivare questa funzione. A questo punto si deve collegare uno schermo supplementare all’uscita VGA. D E-SATA 6 USCITA VIDEO/SPOT 5 ALIMENTAZIONE A PULSANTE ON/OFF 2 INGRESSO AUDIO 8 USCITA USB 7 USCITA AUDIO 4 USCITA VGA C IR B NTSC/PAL 3 COLLEGAMENTO RETE 9 RS485/RELÈ/SENSORE Elemento Descrizione 1 INGRESSI VIDEO Ingressi 8x o 16x BNC di collegamento per telecamere analogiche. 2 INGRESSI AUDIO Ingressi RCA per il segnale audio. 3 COLLEGAMENTO RETE Collegamento alla LAN, presa RJ45. 4 USCITA VGA Uscita per un monitor VGA. 5 ALIMENTAZIONE Ingresso CC 12 V. 6 USCITA VIDEO/SPOT Uscita BNC per monitor analogico, che consente anche una visualizzazione sequenziale delle telecamere. 7 USCITE AUDIO Uscite RCA per un segnale audio. 8 USB Porta USB per collegare una periferica (mouse, hard disk esterno, chiavetta USB). 9 RS485/RELÈ/SENSORE Connettore Sub-D (DB25) maschio, ingressi e uscite per collegare le telecamere PTZ, relè e allarmi (consultare il paragrafo 2.5 per i collegamenti). 10 Pulsante ON/OFF Pulsante dell'alimentazione elettrica. 11 NTSC/PAL Commutatore NTSC/PAL. In Europa lasciare il commutatore in posizione PAL. 12 IR Connettore per una estensione di un sensore IR. 13 E-SATA Connettore per un hard disk esterno E-SATA. 9 Quick Guida StartRapida Guide Registratore LAN 4/8/16 telecamere 2.5 Collegamento Di Una Telecamera Dome Motorizzata, Di Un’uscita Allarme O Di Un Sensore Connettore sub DB25 N. COLORE 391 515 1. MARRONE 2. ARANCIONE 3. 391 516 391 517 N. COLORE 391 515 391 516 RS 485_B- 14. ROSSO RS 485_D+ RELÈ1_COMUNE 15. GIALLO RELÈ 1 NO (2) VERDE SENSORI_COMUNE 16. BLU RELÈ 1 NC (3) 4. VIOLA SENSORE 2 17. GRIGIO SENSORE 1 5. BIANCO SENSORE 4 18. NERO 6. MARRONE 7. (1) SENSORE 6 SENSORE 6 19. ARANCIONE NA (1) NA SENSORE 8 SENSORE 8 20. 8. VERDE NA (1) NA (1) SENSORE 10 9. VIOLA NA (1) NA (1) 10. BIANCO NA (1) 11 MARRONE 12. 13. SENSORE 3 ROSSO NA (1) SENSORE 5 SENSORE 5 GIALLO NA (1) SENSORE 7 SENSORE 7 21. BLU NA (1) NA (1) SENSORE 9 SENSORE 10 22. GRIGIO NA (1) NA (1) SENSORE 11 NA (1) SENSORE 14 23. NERO NA (1) NA (1) SENSORE 13 NA (1) NA (1) SENSORE 16 24. ROSSO NA (1) NA (1) SENSORE 15 ARANCIONE NA (1) NA (1) RELÈ 2 COMUNE 25. GIALLO NA (1) NA (1) RELÈ 2 NO (2) VERDE NA (1) NA (1) RELÈ 2 NC (3) NA : non applicabile NO : normalmente aperto NC : normalmente chiuso (1) (2) (3) Specifiche relè Relé AC DC Potenza massima erogabile 120 W 48 W Tensione massima fornita 120 V 24 V Amperaggio massimo previsto 1A 2A Collegamento per una telecamera PTZ - Collegamento di un dispositivo all’uscita sensore (esempio relè 1NC) Collegamento di un dispositivo all’ingresso sensore (esempio sensore 1) + NF 10 391 517 2.6Telecomando 2 3 4 6 8 5 10 9 7 12 13 11 15 19 18 3 3 27 22 21 2 2 14 16 17 20 26 Nota: il modello del telecomando può essere diverso da quello raffigurato. 23 28 24 30 29 31 25 32 33 2 Descrizione dei tasti del telecomando 2 3 3 2 STATUS Visualizza il menu "DIAGNOSTICA". 3 REC Lancia/arresta la registrazione. 4 MUTE 5 PIP 5 5 6 6 6 6 6 7 8 8 4 4 4 4 10 10 9 8 8 9 5 12 13 10 5 10 14 11 12 13 9 14 16 7 11 9 15 9 7 19 16 15 13ZOOM 19 12 A 121813 14 11 14 17 11 15 16 1518B ESC 16 17 19 19 22 20 21 22 18 20 21 18 17 24 25 23 17 25 23 3024 26 28 32 7 78 Disattiva il segnale audio in diretta. Attiva/disattiva il formato "immagine nell'immagine" (PIP). Utilizzare i tasti direzionali per navigare nel menu e premere il tasto "ENTER" per accedere all'elemento desiderato. Passa in visualizzazione multipla. Passa in visualizzazione a 9 canali. (Funzione non supportata sul registratore a 4 telecamere). Passa in visualizzazione a 13 canali. (Funzione non supportata sul registratore a 4/8 telecamere). Passa in visualizzazione a 16 canali. (Funzione non supportata sul registratore a 4/8 telecamere). Attiva o disattiva la funzione zoom. Utilizzare i tasti direzionali per navigare nel menu e premere il tasto "ENTER" per cambiare la telecamera. Esce dal menu. 11 Guida Rapida Registratore LAN 4/8/16 telecamere 2 3 2 3 Accede al menu di ricerca. Utilizzare i tasti direzionali per navigare nel menu e premere il tasto "ENTER" per accedere all'elemento desiderato. C SEARCH 2 3 29 D PLAY 6 23 28 26 33 31 8 4 8 10 7E 9 10 7 12 13 9 21 20 32 24 30 5 27 5 6 4 4 14 11 F 12 15 613 16 8 14 11 19 5 15 10 16 19 18 G 9 17 7 18 17 H 13 20 21 12 22 14 11 15 22 16 20 21 25 23 24 19 26 23 3024 28 I 32 25 18 26 28 30 32 17 27 31 / MODALITÀ 29 ENTER 33 J 25 22 18 11 17 19 15 12 13 7 14 16 9 10 5 6 27 29 20 3121 33 22 8 4 K COPY 25 23 24 26 28 30 32 L FREEZE 27 29 M AUTO 31 33 Lancia la lettura dell'ultima registrazione. Utilizzare visualizzazione in schermo semplice per visualizzare il video registrato con il parametro di fotogrammi al secondo precedentemente impostato nel menu “CONFIGURA REGISTRAZIONI” -> “Configura Qualità e frame rate”. Attiva o disattiva il menu principale. Mette in pausa la lettura. Tasto direzionale Alto. Avanzamento al rallentatore, velocità: 1/2x, 1/4x, 1/8x, 1/16x e immagine/ immagine. Tasto direzionale Destra. Avanzamento rapido, velocità: 2x, 4x, 8x, 16x, 32x, 64x. Tasto direzionale Basso. Arresta la lettura. Tasto direzionale Sinistra. Riavvolgimento rapido, velocità: 2x, 4x, 8x, 16x, 32x, 64x. Convalida una selezione, un inserimento. In modalità Visualizzazione passa dallo schermo semplice allo schermo quadruplo. Accede al menu di esportazione delle registrazioni. Attiva/disattiva la funzione FREEZE (congela l'immagine). Attiva la modalità Sequenziale. 3 N PTZ Attiva/disattiva i comandi PTZ. O LOCK Scollega l'account utente. 2 P OSD Attiva o disattiva la visualizzazione delle informazioni sullo schermo. Questi tasti hanno una funzione dedicata alla telecamera PTZ. 12 Q IRIS + PTZ - Apre il diaframma. R IRIS - PTZ - Chiude il diaframma. S ZOOM + PTZ - Zoom + T ZOOM - PTZ - Zoom - U FOCUS + PTZ – Focus + V FOCUS - PTZ – Focus - W PRESET + cifre Non disponibile. X TOUR Non disponibile. 2.7Comando Dal Mouse Modalità Visualizzazione diretta Visualizzazione di una telecamera Spostare il mouse sulla telecamera desiderata e fare doppio clic con il tasto sinistro. Passaggio dalla visualizzazione di una telecamera a Fare doppio clic con il tasto sinistro. quella di molteplici telecamere Mouse - Modalità Menu Accesso alla configurazione Menu Fare clic con il tasto destro. Seleziona/Convalida Clic con il tasto sinistro. Ritorna alla pagina precedente senza salvare Clic con il tasto destro. Mouse - Icone Quando il mouse è posizionato su questa icona, compaiono le quattro icone del menu (Menu principale / Ricerca / Back-up / PTZ). CONFIGURAZIONE MENU PRINCIPALE Registrazione / Eventi / Programma / Foto / Account / Internet / PTZ ed RS485 / Parametri Sistema, Utility e Diagnostica. RICERCA ESPORTAZIONE REGISTRAZIONI CONTROLLO PTZ Attiva/disattiva la registrazione se non è attiva alcuna modalità Registrazione configurata in "Parametri Calendario". LETTURA registrazione. Quando il mouse è posizionato su questa icona, compaiono le cinque icone di visualizzazione (PAUSA / PIP / ZOOM / AUTO SEQ / LOCK). PAUSA, per mettere un'immagine LIVE in pausa. PIP, immagine nell'immagine. CONFIGURAZIONE VISUALIZZAZIONE ZOOM, consente di raddoppiare le dimensioni dell'immagine. Sequenziale. BLOCCO, attiva il blocco dei tasti. Visualizzazione a schermo intero, passaggio da un canale all'altro mediante molteplici clic. Visualizzazione 4 canali Visualizzazione 9 canali (DVR 8/16CH). Visualizzazione 13 canali (DVR 16CH). Visualizzazione 16 canali (DVR 16CH). 13 Guida Rapida Registratore LAN 4/8/16 telecamere Mouse - Astuzie e consigli per l'interfaccia grafica utente (IUG) Registrazione in corso. Il suono diretto è attivato. Il suono diretto è disattivato. Movimento rilevato sulla telecamera. Sensore attivato sulla telecamera. Perdita del segnale video rilevata sulla telecamera. Periferica USB rilevata. Il registratore è collegato a Internet. La modalità SEQUENZIALE è attiva. La funzione FREEZE è attiva, lo schermo è congelato. La funzione di blocco (LOCK) è attiva. La modalità PTZ è attiva. Indica il volume dell'hard disk utilizzato (99%). Data/ora del sistema utilizzata al momento della conversione dei file video. 14 3 Funzionamento Di Base E Configurazione Dei Menu 3.1 Menu Principale Per accedere al menu principale, fare clic con il tasto destro e poi clic sull’icona indicata dal cursore di seguito. Per accedere al menu principale e configurare il registratore, utilizzare l’account “Admin” e la password di default “123456”. Tastiera virtuale Menu principale - Uso della tastiera virtuale Passa dalle maiuscole alle minuscole, e viceversa. Passa dalle cifre alle lettere, e viceversa. Chiude la tastiera senza salvare. Cancella l'ultimo carattere digitato. Salva un inserimento. 15 Guida Rapida Registratore LAN 4/8/16 telecamere 3.2 Configurazione Del Sistema Parametro Descrizione Nome DVR (nome registratore) (DVR Name) Il nome del registratore sarà indicato nel momento in cui gli utenti si collegano a distanza. Ubicazione del registratore (DVR Location) Lingua (Language) Telecomando (identificativo remoto) (Remote ID) L'ubicazione del registratore sarà indicata nel momento in cui gli utenti si collegano a distanza. Fare clic o premere per selezionare la lingua visualizzata sullo schermo. Lasciare a 1, in quanto il parametro consente di identificare il registratore utilizzando un solo telecomando per molteplici registratori. Dopo un minuto di inattività, il DVR passa automaticamente in modalità Visualizzazione diretta. In base alla parametrizzazione, l'utente è scollegato e i tasti del pannello anteriore vengono simultaneamente disattivati. Quindi il DVR attende un movimento del mouse e l'inserimento di una password. Blocco automatico (Auto Lock) Parametri Visualizzazione (Display Setup) Parametri Data e ora (Date/Time Setup) 16 Scollegamento automatico Blocco della tastiera Con blocco Blocca pulsante Sì Sì Senza blocco Sblocca pulsante Sì No Disattivato No No Regolazione Funzione Configura la visualizzazione. Regola la data e l'ora. Parametri Vari (Device Setup) Configura l'allarme sonoro e il relè, e regola i parametri di visualizzazione dello schermo (risoluzione VGA, ecc.). Parametri Spot (Spot Setup) Consente di configurare la modalità Spot. 3.3 Modalità Lettura Fare clic con il tasto destro sullo schermo e selezionare la freccia indicata di seguito. Il pannello di comando (cfr. immagine seguente) compare in basso nell’angolo destro dello schermo. È possibile spostare il pannello ovunque sullo schermo facendolo scorrere con il mouse. Il video registrato è visualizzato sullo schermo in modalità 4, 9 o 16 telecamere. Se si vede una sola immagine al secondo, selezionare la telecamera e metterla a schermo intero. Potrai vedere il video registrato con il numero di fotogrammi al secondo precedentemente impostato nel menu “CONFIGURA REGISTRAZIONI” -> “Configura Qualità e frame rate”. Lettura - Icone di funzione rapida Riavvolgimento rapido. Velocità: 2x, 4x, 8x, 16x, 32x, 64x Avanzamento rapido. Velocità: 2x, 4x, 8x, 16x, 32x, 64x Lettura o pausa. Attiva l'avanzamento al rallentatore. Velocità: 1/2x, 1/4x, 1/8x, 1/16x Arresta la lettura. Velocità: 1/2x, 1/4x, 1/8x, 1/16x Lettura canale per canale con visualizzazione istantanea (lettura immagine per immagine). Visualizzazione a schermo intero. Visualizzazione 4 canali. Visualizzazione 9 canali (DVR 8/16CH). Visualizzazione 16 canali (DVR 16CH). Funzione "Zoom". Funzione "Cattura di schermo". 17 Guida Rapida Registratore LAN 4/8/16 telecamere 3.4 Configurazione Ptz E Rs-485 Il registratore consente agli utenti di pilotare una telecamera motorizzata. Per attivare la funzione PTZ, collegare il cavo RS485 alla porta RS-485 del registratore (consultare il paragrafo 2.5, Collegamento per una telecamera PTZ). Parametro Descrizione Attiva controllo PTZ (Enable PTZ) Selezionare o deselezionare questa casella per attivare o disattivare la funzione PTZ su ogni telecamera. Protocollo (Protocol) Configura il protocollo della telecamera PTZ. I protocolli utilizzati sono PELCO-P, PELCO-D, KND, Luch, LG e Samsung. PTZ ID (identificativo PTZ) Fare clic o premere per configurare l'identificativo PTZ. Deve essere compreso tra 1 e 64. Baud Rate (velocità di trasmissione in Baud) Selezionare la velocità del PTZ (2400, 4800, 9600, 19200). RS-485 ID RS-485 Baud Rate Non applicabile. Keyboard Per le telecamere motorizzate della gamma attuale: configurare il registratore con il protocollo “Pelco D” e una velocità di “2400 Baud”. 18 3.5 Modalità Ptz In modalità Visualizzazione diretta l’icona PTZ [ ] compare nella parte superiore dello schermo. PTZ - Comandi del telecomando F / Sposta la telecamera verso l'alto. H / Sposta la telecamera verso il basso. I / Sposta la telecamera a sinistra. G / Sposta la telecamera a destra. S / ZOOM + Zoom + T / ZOOM - Zoom - U / FOCUS + Focus + V / FOCUS - Focus - Q / IRIS + Apre il diaframma. R / IRIS - Chiude il diaframma. X / TOUR Non disponibile. W / PRESET + N° Non disponibile. D / PLAY + N° Non disponibile. A / ZOOM Non disponibile. 5 / PIP Non disponibile. L / FREEZE Non disponibile. 19 Guida Rapida Registratore LAN 4/8/16 telecamere PTZ - icone delle funzioni rapide Esce dalla modalità PTZ per tornare in modalità Visualizzazione diretta. Posizione predefinita n. (da 1 a 128). Porta alla posizione predefinita n. Memorizza l'ubicazione della camera alla posizione n. Non disponibile. Non disponibile. Non disponibile. Non disponibile. Consente di spostare la telecamera di 360°. Zoom + o Zoom Focus + o Focus - (disattivare prima l'autofocus della telecamera). Apre o chiude il diaframma (disattivare prima l'autofocus della telecamera). I comandi PTZ avanzati consentono di definire i parametri di una telecamera speed dome accedendo al menu di configurazione (OSD). Richiamo del menu della speed dome: “PRESET 95”: con l’azione 1 poi 2: 2 20 1 PTZ - comandi avanzati Tasto "Focus -" Entra nei sottomenu e convalida le modifiche ai parametri. Tasto "Focus +" Esce dal menu e/o annulla l'azione. Frecce Consentono la navigazione dei menu e la modifica di un parametro. 21 Guida Rapida Registratore LAN 4/8/16 telecamere 22 Contents 1 2 Contents Of The Packaging..................................................................................... 24 Controls and locations............................................................................................. 25 2.1 2.2 2.3 2.4 2.5 2.6 2.7 391 515 Front Panel................................................................................................................. 25 391 515 Rear Panel ................................................................................................................. 27 391 516/391 517 Front Panel ................................................................................................ 28 391 516/391 517 Rear Panel................................................................................................... 29 Connecting A Motorised Dome Camera, An Alarm Output Or A Sensor....................... 30 Remote Control ................................................................................................................. 31 Control Via The Mouse............................................................................................................. 33 3 Standard Operation And Menu Setup ................................................................. 35 3.1 3.2 3.3 3.4 3.5 Main Menu ............................................................................................................................... 35 System Setup ........................................................................................................................................36 Playback Mode.......................................................................................................................... 37 Ptz And Rs-485 Setup.............................................................................................................. 38 Ptz Mode.................................................................................................................................... 39 23 Quick Start Guide LAN recorder 4/8/16 cameras 1. Contents Of The Packaging 1. Digital video recorder 2. Installation CD, Client Viewer software 3. User Manual 5. Power supply cord 6. Mains adaptor 4. Remote control 7. Batteries 8. Female SUB-D (DB25) connector GB Safety instructions This product should be installed in line with installation rules, preferably by a qualified electrician. Incorrect installation and use can lead to risk of electric shock or fire. Before carrying out the installation, read the instructions and take account of the product’s specific mounting location. Do not open up, dismantle, alter or modify the device except where specifically required to do so by the instructions. All Bticino products must be opened and repaired exclusively by personnel trained and approved by Bticino. Any unauthorised opening or repair completely cancels all liabilities and the rights to replacement and guarantees. Use only Bticino brand accessories. 24 2. Controls And Locations 2.1 391 515 Front Panel Control Description Exits the menu screen and the various functions. Accesses the backup menu. 1 ESC/BACKUP 2 SEARCH Accesses the search screen menu. Use the up/down keys to move around the menu. Press 17 (ENTER) to access the required item. 3 PIP Enables “picture in picture” format. Use the up and down keys to move around. Press 17 ( ) to access the required item. 4 ZOOM Enables or disables the zoom function. Press 17 (ENTER) to change channel. 5 AUTO Enables sequential mode, as defined in the SPOT Setup. 6 REC INDICATOR 7 POWER INDICATOR 8 USB 2.0 Recording indicator. Indicates that the recorder is on. The USB 2.0 port can be used to connect a USB mouse or a USB storage device. 9 REC Starts/stops a recording. 10 PLAY Starts playback. 11 12 13 MENU/PAUSE ( IR SENSOR IR sensor for signals from the remote control. RIGHT DIR. KEY/FAST FORWARD ( 14 UP DIR. KEY/SLOW FORWARD ( ) 15 DOWN DIR. KEY/STOP ( ) 16 17 Accesses menu mode Use the up and down keys to move around the menu screen. Pauses playback. ) LEFT DIR. KEY/FAST REWIND ( ENTER/MODE ( ) ) Right direction key. Fast forward, speed: 2x, 4x, 8x, 16x, 32x, 64x. Up direction key. Slow forward, speed: 1/2x, 1/4x, 1/8x, 1/16x and frame by frame. Down direction key. Stops playback. ) Left direction key. Fast rewind, speed: 2x, 4x, 8x, 16x, 32x, 64x. Switches between full screen mode or division of the screen into 4 (quad screen). Confirms a selection. 25 Quick Start Guide LAN recorder 4/8/16 cameras In direct view mode, keys 13 - 14 - 15 and 16 are used to set up the PIP screens and to enable the sound on the camera: 26 2.2 391 515 Rear Panel 1 VIDEO INPUT 2 VGA OUTPUT 3 AUDIO INPUT 4 RS485/RELAY/SENSOR 5 NETWORK CONNECTION 9 USB 6 POWER SUPPLY 8 AUDIO OUTPUT 7 VIDEO/SPOT OUTPUT Item 1 2 3 4 5 6 RS485DRelay1_CM GND SENSOR2 SENSOR4 GND 14 15 16 17 18 9-13, 21-25 RS485 D+ RELAY1_ND RELAY1_NC SENSOR1 SENSOR3 Description 1 VIDEO INPUTS 4 x BNC inputs. Connection of 4 analogue cameras. 2 VGA OUTPUT Output for a VGA monitor. 3 AUDIO INPUT RCA input for the audio signal. 4 RS485/RELAY/SENSOR Male SUB-D (DB25) connector, inputs and outputs for connecting PTZ cameras, relays and alarms (see section 2.5 for the connections). 5 NETWORK CONNECTION Connection to the LAN, RJ45 connector. 6 POWER SUPPLY 12 VDC. 7 VIDEO/SPOT OUTPUT BNC output for an analogue monitor, for sequential display of the cameras (in SPOT mode). 8 AUDIO OUTPUT RCA output for an audio signal. 9 USB USB port for connecting a peripheral (mouse, USB key, external hard disk, etc.). Note: Once the video output is set up in “Spot” mode, it is no longer possible to use the screen to disable this function. An additional screen must be connected to the VGA output. 27 Quick Start Guide LAN recorder 4/8/16 cameras 2.3 391 516/391 517 Front Panel Control Description 1 CD/DVD recorder location Function not available. 2 IR SENSOR IR sensor for signals from the remote control. 3 EJECT Function not available. 4 USB 2.0 The USB 2.0 port can be used to connect a USB mouse or a USB storage device. 5 Numeric keys Used to select a camera (use the "+10" key for cameras 10 to 16) and for entering numbers. 6 LOCK Locks the keys on the front panel (ON/OFF). 7 PTZ Pan/Tilt/Zoom menu. 8 REC Starts/stops a recording 9 INDICATOR LIGHTS POWER: Indicates that the DVR is on. LAN: Network indicator. HDD: Playing from/writing to the hard disk. 10 LEFT DIR. KEY/FAST REWIND ( 11 UP DIR. KEY/SLOW FORWARD ( ) Up direction key. Slow forward, speed: 1/2x, 1/4x, 1/8x, 1/16x. 12 RIGHT DIR. KEY/FAST FORWARD ( ) Right direction key. Fast forward, speed: 2x, 4x, 8x, 16x, 32x, 64x. 13 DOWN DIR. KEY/STOP ( 14 PLAY Starts playback. 15 SEARCH Accesses the search screen menu. Use the up/down keys to move around the menu. 16 ESC/BACKUP Exits the menu screen and the various functions. Accesses the backup menu. 17 ENTER/MODE ( 18 MENU/PAUSE ( ) Left direction key. Fast rewind, speed: 2x, 4x, 8x, 16x, 32x, 64x. ) Down direction key.Stops playback. Confirmation key. Displays all the cameras in full screen then in multi-screen, in a loop. ) ) Accesses menu mode. Use the up and down keys to move around the menu screen. Pauses playback. 19 MUTE Enables the audio inputs or mute mode. 20 AUTO Enables sequential mode. Shows all cameras in loop mode. 21 FREEZE Freezes the frame (ON/OFF) in direct view mode. 22 ZOOM Enables or disables the zoom function which doubles the size of the image on the screen. Press 17 ( ) to change channel. 23 STATUS Displays the software version, the IP address, the MAC address and the status of the hard disk (DIAGNOSTIC menu). 24 PIP Enables “picture in picture” format. Use the up and down keys to move around. 25 MULTI CH1->...CH16->CH1-4->CH5-8->CH9-12->CH13-16->CH1-9>CH8-16-> CH1-13->CH1-16 In direct view mode, keys 13 - 14 - 15 and 16 are used to set up PIP screens (see image on page 5). 28 2.4 391 516/391 517 Rear Panel 8-channel recorder 1 CAMERA 1-8 3 NETWORK CONNECTION 2 AUDIO INPUT 4 VGA OUTPUT 5 POWER SUPPLY 8 USB OUTPUT 9 RS485/RELAY/SENSOR 7 AUDIO OUTPUT 6 VIDEO/SPOT OUTPUT Note: Once the video output is set up in “Spot” mode, it is no longer possible to use the screen to disable this function. An additional screen must be connected to the VGA output. 16-channel recorder 1 CAMERA 1-16 D E-SATA 6 VIDEO/SPOT OUTPUT 5 POWER SUPPLY A ON/OFF BUTTON 2 AUDIO INPUT 8 USB OUTPUT 7 AUDIO OUTPUT 4 VGA OUTPUT C IR B NTSC/PAL 3 NETWORK CONNECTION 9 RS485/RELAY/SENSOR Item Description 1 VIDEO INPUTS 8x or 16x BNC inputs for connecting analogue cameras. 2 AUDIO INPUTS RCA inputs for the audio signal. 3 NETWORK CONNECTION Connection to the LAN, RJ45 connector. 4 VGA OUTPUT Output for a VGA monitor. 5 POWER SUPPLY 12 VDC input. 6 VIDEO/SPOT OUTPUT BNC output for an analogue monitor, for sequential display of cameras. 7 AUDIO OUTPUTS RCA outputs for an audio signal. 8 USB USB port for connecting a peripheral (mouse, external hard disk, USB key). 9 RS485/RELAY/SENSOR Male SUB-D (DB25) connector, inputs and outputs for connecting PTZ cameras, relays and alarms (see section 2.5 for the connections). 10 ON/OFF button Electricity supply button. 11 NTSC/PAL NTSC/PAL switch. In Europe leave the switch in PAL position. 12 IR Connector for an IR sensor extension. 13 E-SATA Connector for an E-SATA external hard disk. 29 Quick Start Guide LAN recorder 4/8/16 cameras 2.5 Connecting A Motorised Dome Camera, An Alarm Output Or A Sensor Sub DB25 connector No. COLOUR 1. BROWN 2. ORANGE 3. 4. 391 515 391 516 391 517 No. COLOUR 391 515 391 516 RS 485_B- 14. RED RS 485_D+ RELAY1_COMMON 15. YELLOW RELAY 1 NO (2) GREEN SENSORS_COMMON 16. BLUE RELAY 1 NC (3) PURPLE SENSOR 2 17. GREY SENSOR 1 5. WHITE 18. BLACK 6. BROWN NA (1) SENSOR 6 SENSOR 6 19. RED 7. ORANGE NA (1) SENSOR 4 SENSOR 8 8. GREEN NA (1) 9. PURPLE 10. SENSOR 3 NA (1) SENSOR 5 SENSOR 5 SENSOR 7 SENSOR 7 SENSOR 8 20. YELLOW NA (1) (1) SENSOR 10 21. BLUE NA (1) NA (1) NA (1) SENSOR 10 22. GREY NA (1) NA (1) SENSOR 11 WHITE NA (1) NA (1) SENSOR 14 23. BLACK NA (1) NA (1) SENSOR 13 11. BROWN NA NA SENSOR 16 24. RED NA NA 12. ORANGE NA (1) RELAY 2 OMMON 25. YELLOW 13. (1) NA (1) NA (1) (1) NA (1) NA (1) (1) NA (1) GREEN NA (1) NA (1) RELAY 2 NC (3) (2) NA : Not applicable NO : Normally open NC (3): Normally closed (1) Relay specifications Relays AC DC Maximum Switch Power 120 W 48 W Maximum Switch Voltage 120 V 24 V Maximum Switch Current 1A 2A Connection for a PTZ camera - Connecting a device to the relay output (example: relay 1NC) + NF Connecting a device to the sensor input (example: sensor 1) 30 391 517 SENSOR 9 SENSOR 15 RELAY 2 NO (2) 2.6 Remote Control 2 3 4 6 8 5 10 9 7 11 15 19 18 3 3 27 14 16 17 20 26 Note: The remote control model may differ from that shown. 12 13 22 21 25 23 24 282 30 32 2 31 29 33 2 2 Description of the keys on the remote control 3 3 2 STATUS Displays the DIAGNOSTIC menu. 3 REC Starts/stops recording. 4 MUTE 5 PIP 5 5 6 6 6 6 6 7 8 8 4 4 4 4 10 10 9 8 8 9 5 12 13 10 5 10 14 11 12 13 9 14 16 7 11 9 15 9 7 19 16 15 13ZOOM 19 12 A 121813 14 11 14 17 11 15 16 1518B ESC 16 17 19 19 22 20 21 22 18 20 21 18 17 24 25 23 17 7 78 Disables the direct audio signal. Enables/disables “picture in picture” (PIP) format. Use the direction keys to move around in the menu and press the “ENTER” key to access the required item. Switches to quad display. Switches to 9-channel display. (Function not available on 4-camera recorder). Switches to 13-channel display. (Function not available on 4/8-camera recorder). Switches to 16-channel display. (Function not available on 4/8-camera recorder). Enables or disables the zoom function. Use the direction keys to move around in the menu and press the“ENTER”key to change camera. Exits the menu. 31 Quick Start Guide LAN recorder 4/8/16 cameras 22 33 2 3 C SEARCH 29 27 66 23 28 26 77 33 31 32 24 30 21 25 22 11 F 11 5 15 15 99 17 18 15 H 11 21 21 12 13 14 14 16 16 8 17 13 12 17 1522 22 7 I 23 4 11 19 18 18 19 19 7 G Starts playback of the last recording. Use the full screen mode to display the recorded video with the image per second you have set in the menu :“Record Setup” -> “Quality & Frames Setup ...”. 10 10 20 E 10 14 16 Down direction key. Stops playback. 19 25 25 27 27 20 3121 33 K 29 COPY 33 22 31 29 5 29 9 10 8 4 O LOCK 33 3 P OSD 31 Accesses the backup menu. 25 32 Left direction key. Fast rewind, speed: 2x, 4x, 8x, 16x, 32x, 64x. Confirms a selection or an entry. In view mode switches between single screen and quad screen. 6 14 16 N PTZ 27 24 30 Up direction key. Slow forward, speed: 1/2x, 1/4x, 1/8x, 1/16x and frame by frame. Right direction key. Fast forward, speed: 2x, 4x, 8x, 16x, 32x, 64x. 26 26 L FREEZE 23 Enables or disables the main menu. Pauses playback. 9 24 23 24 18 30 28 30 28 32 17 J ENTER/MODE 32 26 28 M AUTO 2 32 88 13 12 613 12 20 20 44 D PLAY 55 Accesses the search menu. Use the direction keys to move around in the menu and press the “ENTER” key to access the required item. Enables/disables the FREEZE function (freezes the frame). Enables sequential mode. Enables/disables the PTZ controls. Disconnects the user account. Enables or disables the on-screen display of information. These keys have functions specifically for the PTZ camera Q IRIS + PTZ – Open the diaphragm. R IRIS - PTZ – Close the diaphragm. S ZOOM + PTZ - Zoom + T ZOOM - PTZ - Zoom - U FOCUS + PTZ – Focus + V FOCUS - PTZ – Focus - W PRESET + numbers Not available. X TOUR Not available. 2.7 Control Via The Mouse Direct View mode Display one camera Move the mouse over the required camera, then double-click the left button. Switch from display of one camera to display of several cameras Double-click the left button. Mouse – Menu mode Access to Menu setup Right-click. Select/Confirm Left-click. Back to previous page without saving Right-click. Mouse – Icons When the mouse is positioned over this icon, the four menu icons (Main menu/Search/Backup/PTZ) appear. SETUP MAIN MENU Record/event/schedule/camera/account/Internet/PTZ & RS485/system setup, Utility, Diagnostic. SEARCH BACKUP PTZ CONTROL Enables/disables recording, if no other recording mode set up in “Schedule Setup” is in progress. PLAY recording. When the mouse is positioned over this icon, the five display icons (PAUSE/PIP/ZOOM/AUTO SEQ/LOCK) appear. PAUSE, to pause a LIVE frame. PIP, picture in picture. DISPLAY SETUP ZOOM, for doubling the size of the image. Sequential. LOCK, enables locking of the keys. Full screen display, switch from one channel to another using multiple clicks. 4-channel display. 9-channel display (8/16 CH DVR). 13-channel display (16 CH DVR). 16-channel display (16 CH DVR). 33 Quick Start Guide LAN recorder 4/8/16 cameras Mouse – Tips and hints for using the Graphical User Interface (GUI) Recording in progress. Direct sound is enabled. Direct sound is disabled. Motion detected on the camera. Sensor triggered on the camera. Loss of video signal detected on the camera. USB peripheral detected. The recorder is connected to the Internet. SEQUENTIAL mode is enabled. The FREEZE function is enabled, the screen is frozen. The LOCK function is enabled. PTZ mode is enabled. Indicates the amount of hard disk space used (99%). Date/time the system used when converting video files. 34 3 Standard Operation And Menu Setup 3.1 Main Menu To enter the main menu, right-click then click on the icon indicated by the cursor below. To access the main menu and set up the recorder, use the “Admin” account and the default password "123456". Virtual keyboard Main menu - Using the virtual keyboard Switches from upper case to lower case and vice versa. Switches from numbers to letters and vice versa. Closes the keyboard without saving. Deletes the last character entered. Saves an entry. 35 Quick Start Guide LAN recorder 4/8/16 cameras 3.2 SYSTEM SETUP Parameter DVR Name DVR Location Description The name of the recorder will be shown when users connect remotely. The location of the recorder will be shown when users connect remotely. Language Click or press Remote ID Leave set at 1. This setting is used to identify the recorder when one remote control is used for several recorders. to select the language of the screen display. After one minute with no activity, the DVR switches automatically to direct view mode. Depending on the setup, the user is disconnected and the keys on the front panel are disabled at the same time. The DVR then waits for the mouse to be moved followed by entry of a password. Auto Lock Display Setup Date/Time Setup Device Setup Spot Setup 36 Function Automatic disconnection Locking of the keypad With locking Lock button Yes Yes Without locking Unlock button Yes No Disable No No Setting Sets up the display. Sets the date and time. Sets up the audible warning device and the relay, and sets the screen display settings (VGA resolution, etc.). Sets up Spot mode. 3.3 PLAYBACK MODE Right-click on the screen and select the arrow as shown below. The control panel (see image below) appears in the bottom right-hand corner of the screen. You can move the panel anywhere on the screen by dragging it with the mouse. The recorded videos are displayed on the screen in 4, 9 or 16 channels display mode. If you can see only one frame per second, select the channel and put it in full screen. You will see the recorded video with the frames per second you have set in the menu “Record Setup” -> “Quality & Frames Setup...” Playback - Quick function icons Fast rewind. Speed: 2x, 4x, 8x, 16x, 32x, 64x Fast forward. Speed: 2x, 4x, 8x, 16x, 32x, 64x Play or pause. Enables slow forward. Speed: 1/2x, 1/4x, 1/8x, 1/16x Stops playback. Speed: 1/2x, 1/4x, 1/8x, 1/16x Play back channel by channel with instant display (play frame by frame). Full screen display. 4-channel display. 9-channel display (8/16 CH DVR). 16-channel display (16 CH DVR). Zoom function. Snapshot function. 37 Quick Start Guide LAN recorder 4/8/16 cameras 3.4 PTZ AND RS-485 SETUP The recorder enables users to control a motorised camera. To enable the PTZ function, the RS485 cable must be connected to the RS-485 port on the recorder (see section 2.5, Connection for a PTZ camera). Parameter Description Enable PTZ Check or uncheck this box to enable or disable the PTZ function on each camera. Protocol PTZ ID Baud Rate Sets up the protocol of the PTZ camera. The following protocols are supported: PELCO-P, PELCO-D, KND, Luch, LG and Samsung. Click or press to set up the PTZ ID It must be between 1 and 64. Select the PTZ baud rate (2400, 4800, 9600, 19200). RS-485 ID RS-485 Baud Rate Not applicable. Keyboard For motorised cameras in the current range: set up the recorder with the “Pelco D” protocol and a baud rate of “2400 Bauds”. 38 3.5 PTZ MODE In direct view mode the PTZ icon [ ] appears at the top of the screen. PTZ – Controls on the remote control F / Move the camera upwards. H / Move the camera downwards. I / Move the camera to the left. G / Move the camera to the right. S / ZOOM + Zoom + T / ZOOM - Zoom - U / FOCUS + Focus + V / FOCUS - Focus - Q / IRIS + Open diaphragm. R / IRIS - Close diaphragm. X / TOUR Not available. W / PRESET + No. Not available. D / PLAY + No. Not available. A / ZOOM Not available. 5 / PIP Not available. L / FREEZE Not available. 39 Quick Start Guide LAN recorder 4/8/16 cameras PTZ – Quick function icons Exits PTZ mode and return to direct view mode. Preset position No. (1 to 128). Goes to preset position N. Memorises the location of the camera in position N. Not available. Not available. Not available. Not available. Moves the camera 360°. Zoom + or Zoom Focus + or Focus - (disable the camera's autofocus beforehand). Open or close the diaphragm (disable the camera's autofocus beforehand). Advanced PTZ controls are used to set up a speed dome by going into its setup menu (OSD). Call the speed dome menu: “PRESET 95”: using action 1 then action 2: 2 40 1 PTZ – advanced controls “Focus -” key Goes to submenus and confirms setting changes. “Focus +” key Exits the menu and/or cancels the action. arrows For moving around in the menus and modifying a setting. 41 Quick Start Guide LAN recorder 4/8/16 cameras 42