Canne Spinning / Spinning Rods

Transcript

Canne Spinning / Spinning Rods
Spinning
COSMIC
Codice
Lungh.
Peso gr
Ø mm
N° sez
N° Anelli
Ing. cm
Casting gr
370CS0221
2,10
173
12,5
2
6
113
20/50
370CS0224
2,40
210
13
2
6
126
20/50
370CS0227
2,70
239
13,8
2
6
141
20/50
370CS0121
2,10
154
12
2
6
113
10/30
370CS0124
2,40
184
12,8
2
6
126
10/30
370CS0127
2,70
206
13
2
6
141
10/30
Canna da spinning in due sezioni ad innesti realizzata in carbonio “IM6” high resistance. Prodotta in tre metrature
con due casting di potenza diversa, esprime un’azione potente che però non spezza l’armoniosità della curvatura sotto trazione. Monta passanti “ADVANCED SIC” a ponte medio, porta mulinello a vite, impugnatura in sughero
naturale e gancio “hook retainer”. Grande rapporto qualità – prezzo.
This two-piece take-apart spinning rod is built from high-strength IM6 carbon and comes in three lengths with two casting weights.
Despite its powerful action, the Cosmic will exhibit a smooth bending curve with no flat spots when under load. It comes fitted with
medium-leg Advanced SIC guides, screw reel seat, cork handle and hook retaining ring. Excellent value for money.
FAITH SPIN
Codice
Lungh.
Az.
Peso gr
Ø mm
N° sez
N° Anelli
Ing. cm
370FS0U67
6’7” - 2,01 mt
UL
83
9
2
9
103
Casting gr
1/8
370FS0U71
7’1” - 2,13 mt
UL
88
9,5
2
9
108
1/8
370FS0U76
7’6” - 2,30 mt
UL
95
10
2
10
116
1/8
Codice
Lungh.
Az.
Peso gr
Ø mm
N° sez
N° Anelli
Ing. cm
Casting gr
370FS0067
6’7” - 2,01 mt
M
96
10
2
9
103
2/15
370FS0071
7’1” - 2,13 mt
M
97
10
2
9
108
2/15
370FS0076
7’6” - 2,30 mt
M
103
10,5
2
10
116
2/15
Nuova serie di canne in due pezzi realizzate in carbonio alto modulo, ideate per uno spinning medio-leggero e con ottimo rapporto qualità prezzo. Caratterizzate da una cosmetica e da una grafica molto sobrie ed eleganti, si presentano in tre differenti lunghezze con due
casting diversi. Montano passanti della serie “K”, porta mulinello a vite con particolare sagomatura dal design “sensivity touch”, che permette un’immediata percezione dell’entità della preda
“trasmettendola” nella mano del pescatore, impugnatura sdoppiata e gancino “hook-retainer”.
New range of value-for-money two-piece rods specially designed for medium-light spinning. Built on a high modulus carbon blank with simple, classy cosmetics, these rods come in two lengths with different casting weights.
Key features include K-Series guides, a blank-through reel seat for additional feel and improved rod sensitivity, a split-grip handle and a hook
retaining ring.
www.milo.it
www.facebook.com/milomclass
www.milo.it/mcmag
1
Spinning
PANACEA FORCE MONOPEZZO
Questa nuova serie di canne è stata ideata per angler molto esigenti, puntando alla realizzazione di attrezzi molto bilanciati e leggeri, in grado di
trasmettere al massimo anche la più impercettibile tocca del pesce. Per raggiungere questo risultato è stata scelta la migliore graphite alto modulo
che ci ha permesso di realizzare fusti da diametro ridotto ottenendo vette sottili, in grado di donare alle canne azioni fast, tipicamente AMERICANE,
capaci di adattarsi a molteplici esigenze. La serie completa è composta da 4 modelli casting, che spaziano dalle hard bait alle soft lure, senza tralasciare
le swim bait. Il grip in E.V.A. è stato opportunamente modificato per venire incontro alle nuove tecniche di lancio, si presenta splittato per meglio bilanciare il blank, mentre il portamulinello è stato alleggerito, eliminando il foregrip, andando così ad aumentare ulteriormente il touch con il grezzo
stesso. Per questa serie di canne sono stati scelti speciali anelli in carburo di silicio. Per queste canne, si è optato per l’utilizzo di un sistema “semi-micro”
per permettere al grezzo di curvare in maniera molto armonica, anche nei combattimenti più impegnativi. Un look elegante rifinisce questa linea di canne
dall’ottimo rapporto qualità/prezzo che le colloca in una fascia medio-alta, sono state sviluppate per l’utilizzo delle hard e wire bait, ma soprattutto per
tutte le soft lure.
Designed to satisfy the needs of the most demanding anglers, this new range of one-piece rods offers a lightweight, balanced feel combined with
the sensitivity to detect even the lightest of bites. Built with the highest-quality, high-modulus graphite available on the market, these rods feature
slimline blanks with ultra fine tips that deliver extremely fast actions, making them ideal to cover a variety of fishing situations. The range includes four
casting rods that can handle a variety of artificial baits such as soft lures, hard baits and swimbaits. To suit the requirements of modern casting techniques, these rods feature a split-grip EVA handle for improved rod balance and a lighter real seat that eliminates the need for a foregrip, thus allowing
direct finger contact on the rod blank for greater sensitivity. For this rod range silicone carbide guides were chosen. Casting rods feature a semi-micro
guide system which allows the rod blank to bend smoothly even when fighting big fish. All models in the range feature a stylish look and offer excellent
value for money, making them a great choice for anglers looking for mid/high-end quality rods at an affordable price.
2
Codice
Mod
370PNC681
CASTING
MXFC
370PN0HC7
CASTING
MHFC
7’
134
13,5
1
370PN00X7
CASTING
HXFC
7’
147
13,5
1
370PN0X73
CASTING
MEGAHXXFC
7’3”
145
13,8
1
10
www.milo.it
Lungh. ft
Peso gr
Ø mm
N° sez
N° Anelli
Ing. cm
Azione
6’8”
121
13
1
10
205
1/4-5/8 oz
10
210
3/8-1 oz
10
210
1-5 oz
223
1-5 oz
www.facebook.com/milomclass
www.milo.it/mcmag
Spinning
Spinning
PANACEA FORCE 2 Sezioni
Codice
Mod
370PNS682
SPINNING
MXFS
Lungh. ft
Peso gr
Ø mm
N° sez
N° Anelli
Ing. cm
Azione
6’8”
105
12
2
7
105
1/4-5/8 oz
370PN00S7
SPINNING
MHXS
7’
115
13
2
7
110
3/8-1 oz
370PNC682
CASTING
MXFC
6’8”
129
12,5
2
10
105
1/4-5/8 oz
370PN00C7
CASTING
MHXC
7’
137
13
2
10
110
3/8-1 oz
Questa nuova serie di canne è stata
ideata per una nuova generazione di pescatori, la new generation degli street
fisher, pescatori concreti che richiedono
attrezzi polivalenti, ben rifiniti e bilanciati, ma sempre compatti atti ad
agevolare il trasporto. Grazie all’utilizzo
dei più innovativi tessuti di carbonio
alto modulo abbiamo ottenuto fusti
con azioni fast, capaci di adattarsi a
molteplici esigenze e allo stesso tempo
le abbiamo potute costruire in 2 pezzi
senza perdere sensibilità, potenza e bilanciatura. La serie completa è composta attualmente da 2 modelli casting e 2 spinning. Il grip in E.V.A. è stato opportunamente modificato per venire incontro alle nuove tecniche
di lancio, si presenta splittato per meglio bilanciare il blank, mentre il portamulinello è stato alleggerito, eliminando il foregrip, andando così ad aumentare ulteriormente il touch con il grezzo stesso. Per questa serie di
canne sono stati scelti speciali anelli in carburo di silicio e si è optato per due tipologie di montaggio. La serie
K è stata utilizzata per la canna da spinning, sviluppata per impedire al filo di venire in contatto con il grezzo,
aumentando in questo modo la distanza di lancio, fondamentale in questa tecnica. Per le canne da casting, si è
optato per l’utilizzo di un sistema “semi-micro” per permettere al grezzo di curvare in maniera molto armonica,
anche nei combattimenti più impegnativi. Un look elegante rifinisce questa linea di canne dall’ottimo rapporto
qualità/prezzo che le colloca in una fascia medio-alta. Le canne da casting sono state sviluppate per l’utilizzo
delle hard e wire bait, ma soprattutto per tutte le soft lure. Le canne da spinning hanno un’azione fast con un
tip moderato che permette di adoperarle sia con tecniche light, che con moltissime hard bait compatte, adatte
ad insidiare molteplici predatori.
This new rod series has been specially designed for street fishers, a new generation of down-to-earth anglers who
look for well-finished, perfectly-balanced all-round rods that are also compact in size for easy portability. All models in the range feature two-piece fast-action blanks that are made from the very latest high-modulus carbon cloths and
deliver balance and strength without sacrificing sensitivity. The range comprises 2 casting and 2 spinning models. The
casting rods are specially designed for the use of soft lures, but are equally at home with hard and wire baits. The spinning models are fast-action rods with a medium-action tip that makes them ideally suited for light spinning methods,
as well as for targeting many predators species with a wide variety of small-sized hard baits. To suit the requirements of
modern casting techniques, these rods feature a split-grip EVA handle for improved rod balance and a lighter real seat
that eliminates the need for a foregrip, thus allowing direct finger contact on the rod blank for greater sensitivity. For
www.milo.it
www.facebook.com/milomclass
Casting
this rod
range two
different
styles of
silicone
carbide guides were chosen. The spinning rod is fitted
with K series guides that minimise line contact with
the blank; this increases the casting distance which is
paramount to this fishing technique. Casting rods feature a semi-micro guide system which allows the rod
blank to bend smoothly even when fighting big fish.
All models in the range feature a stylish look and offer excellent value for money, making them a great
choice for anglers looking for mid/high-end quality
rods at an affordable price.
www.milo.it/mcmag
3
Spinning
PANACEA SPIN
Codice
Lungh. ft
370PN0176
5,8
370PN0190
6,3
370PN0196
6,6
370PN0210
370PN0230
Peso gr
Ø mm
N° sez
N° Anelli
Ing. cm
Azione
Casting gr
90
7
2
8
90
UL
0,4/5
100
7,2
2
9
99
UL
0,4/5
98
7
2
9
103
UL
0,5/3
7,2
104
8,5
2
9
111
UL
0,4/7
7,6
107
8,9
2
9
117
L
0,4/7
Canne in 2 sezioni ad innesti realizzate in carbonio alto modulo. Specificatamente prodotte per uno
spinning molto raffinato, ultra leggero per la versione “Spin” e medio leggero per la versione “Prestige”,
si presentano come veri e propri ‘gioiellini’ per componentistica di qualità ed estetica. Perfette per pescare con i nuovi artificiali Kamagotchi Leaf in abbinamento al nuovo micro trecciato Iron Trex, montano
passanti Kappa-W con pietra inscalfibile, porta mulinello sagomato a vite ed impugnatura sdoppiata in
neoprene e carbonio.
Designed to meet the needs of the most sophisticated spinning techniques, this two-section takeapart rod comes in two versions: ‘Spin’ for ultra-light spinning and ‘Prestige’ for medium-light spinning.
High-quality components and stunning looks make these rods real gems. They are made from high modulus carbon and fitted with scratch-resistant Kappa-W guides, a moulded screw reel seat and a neoprene and carbon split-grip handle. Perfect for fishing with our new Kamagotchi Leaf spoons and our new
Iron Trex micro braid.
PANACEA PRESTIGE
4
Codice
Lungh. ft
Peso gr
Ø mm
N° sez
N° Anelli
Ing. cm
Azione
Casting gr
370PN0U21
370PN0L21
370PN0H21
7,00
7,00
7,00
105
113
124
8
8,2
9
2
2
2
8
8
8
110
110
110
UL
ML
MH
1/8
5/18
7/28
www.milo.it
www.facebook.com/milomclass
www.milo.it/mcmag
Spinning
FINESSELURE SPINNING MONO
Cod.
Lungh. mt
Peso gr
Ø mm
N° Sez.
N° Anelli
Ing. cm
Casting gr
370FM198M
370FMH198
370FM198H
1,98 M
1,98 MH
1,98 H
114
116
120
11,5
12
12,3
1
1
1
9
9
9
198
198
198
5-20
8-25
10-30
Prestigiosa canna monopezzo realizzata in carbonio super alto modulo, prodotta in tre azioni differenti, “medium” – “medium-heavy” – “heavy”. Perfetta per la pesca del black bass e per la tecnica del
“flipping”, sia dalla barca che da riva, monta un equipaggiamento “griffato” Fuji, che comprende i passanti in “Alconite” a ponte basso, il porta mulinello sagomato in graphite e l’impugnatura in neoprene
con la parte superiore a vite munita di un piccolo intarsio con carbonio a vista. Lavorazione del grezzo
simile alla versione in due pezzi.
Made from super high modulus carbon, this superb one-piece rod is perfect for black bass fishing
as well as for flipping from either shore or boat. It comes in a choice of three actions: medium, medium-heavy and heavy. It is built with Fuji high-grade components, including short-leg Alconite guides,
a moulded graphite reel seat and a neoprene handle with carbon insets on the foregrip. The blank
manufacturing process is similar to that used for the two-piece version.
FINESSELURE ULTRALITE
Cod.
Lungh. mt
Peso gr
Ø mm
N° Sez.
N° Anelli
Ing. cm
Casting gr
370KF0180
370KF0211
370FI0220
370KF0240
370FI0270
370FI0275
1,80
2,10
2,20
2,40
2,70
2,70
90
98
110
110
137
153
6
7
9
10
12
12,5
2
2
2
2
2
2
7
7
8
8
9
9
94
109
114
124
139
139
2-6
3-12
2-15
5-25
10-30
15-45
Un “gioiello” in due pezzi, realizzata in carbonio super alto modulo, incredibilmente sottile,
leggera e maneggevole. Il processo di lavorazione delle fibre, tipo “marezzatura”, impresso sulla
base, oltre a rendere la canna più solida e affidabile ne valorizza ulteriormente l’aspetto nobile.
Perfetta per uno spinning leggero e medio-leggero, si presenta con un equipaggiamento di prima
classe, che comprende gli anelli in “Alconite” originali Fuji, il porta mulinello sagomato in graphite,
anch’esso originale Fuji ed un’elegante impugnatura in neoprene, con la parte superiore a vite
intarsiata in carbonio ed il calcio in sughero.
Incredibly slim, ultra lightweight and easy to handle, this two-piece rod is a real gem. It is built
on a super high modulus carbon blank and features a special ‘marbling’ process on the butt section which makes the rod more rugged and reliable, while giving it a uniquely attractive appearance. Perfect for light and medium-light spinning, the Ultralite is fitted with high-grade components, including original Fuji Alconite guides, a Fuji
moulded graphite reel seat and a stylish neoprene handle with a cork butt grip and carbon insets in the foregrip.
www.milo.it
www.facebook.com/milomclass
www.milo.it/mcmag
5
Spinning
FINESSELURE SPINNING
Cod.
Lungh. mt
Peso gr
Ø mm
N° Sez.
N° Anelli
Ing. cm
Casting gr
370FSH198
370FS0198
370FSM198
1,98 H
1,98 MH
1,98 M
98
104
106
9
10
10,5
2
2
2
8
8
8
94
94
102
10-30
8-25
5-20
Prestigiosa canna in due pezzi realizzata in carbonio super alto modulo, disponibile in tre versioni, con casting differenti, appartenenti comunque ad uno spinning medio-pesante. La base
presenta un aspetto “marezzato” dato dalla particolare lavorazione delle fibre, impiegate per rendere il prodotto più solido e affidabile. La “MH” esprime un’azione progressiva di punta, la “H” spicca per la totale rigidità, mentre la "M" spicca per azione progressivo-parabolica. Montano i passanti in “Alconite” originali Fuji, il porta mulinello sagomato in graphite, anch’esso originale Fuji, ed
un’impugnatura in neoprene con la parte superiore a vite intarsiata in carbonio.
A superb two-piece casting rod made from super high modulus carbon, specially designed for
medium-heavy spinning. It comes in three versions with different casting weights. The butt section has a marble-like appearance resulting from a special fibre processing method which gives
this rod extra strength and reliability. The “MH” version delivers a progressive tip action, the “H” version is ultra stiff, while the "M" version delivers
a parabolic-progressive tip action. All versions are equipped with original Fuji Alconite guides, a Fuji moulded graphite reel seat and a neoprene
handle with carbon insets in the foregrip.
FINESSELURE CASTING
Cod.
Lungh. mt
Peso gr
Ø mm
N° Sez.
N° Anelli
Ing. cm
Casting gr
370FC0198
370FM0198
370FH0198
1,98 M
1,98 MH
1,98H
113
102
96
11
10
9
2
2
2
9
9
9
102
94
94
5-20
8-25
10-30
Canna da casting di elevata fattura, in due pezzi,
realizzata in carbonio super alto modulo. E’ disponibile nell’azione “MH”, progressiva di punta, “H”, totalmente rigida e "M" progressivo-parabolica. Si presentano con lo stesso grezzo e tipo di lavorazione della
“Finesselure Spinning”. La differenza la fa l’equipaggiamento, sempre comunque “targato” Fuji, che
comprende i passanti monoponte sulla cima, ad eccezione del primo a ponte doppio sulla base, ed il
porta mulinello a vite in graphite munito del tipico
“grilletto”. Impugnatura in neoprene.
This finely crafted two-piece casting rod is manufactured from super
high modulus carbon. It comes in three versions, "MH" with a progressive tip
action, "H" providing an ultra stiff action and "M" delivers a parabolic-progressive
tip action. This rod is based on the same blank and building process as the Finesselure Spinning
but differs for the type and quality of rod components, which include Fuji single-leg guides on the tip section plus a double-leg guide on the butt
section, a Fuji graphite screw reel seat with trigger grip and a neoprene handle.
6
www.milo.it
www.facebook.com/milomclass
www.milo.it/mcmag
Spinning
TECHNOCRAFT SPIN
Cod.
Lungh. mt
Peso gr
Ø mm
N° Sez.
N° Anelli
Ing. cm
Casting gr
370TF0210
370TF0240
2,10
2,40
209
231
11
12
2
2
7
8
110
125
20-50
20-50
Prestigiosa canna in due pezzi ad innesti, in altissimo modulo di carbonio, progettata per uno
spinning in mare dalla barca, rivolto soprattutto alle spigole. Si presenta con calciatura sottilissima,
legature accurate, passanti “low profile” con pietra inscalfibile ed un’impugnatura con porta mulinello
a vite, in neoprene ed alluminio anticorrosione, contornata, nella parte superiore, da piccoli incavi per
il fissaggio dell’amo.
Made from super high modulus carbon, this stylish
and classy two-piece take-apart spinning rod, specially
designed for sea spinning and ideal for sea bass, offers a super slim butt and top-quality whippings.
It features “low profile” guides with anti-scratch
coating and a neoprene and corrosion-resistant
aluminium handle fitted with screw reel seat and
provided in the upper section with a series of
notches to retain the hook.
www.milo.it
www.facebook.com/milomclass
www.milo.it/mcmag
7
Spinning
SR 5 - CASTING E SPINNING
Modello
Cod.
Lungh. mt
Peso gr
Ø mm
N° Sez.
N° Anelli
Ing. cm
Casting gr
Line Rating lbs
Casting
Spinning
370SRC005
370SRS005
2,10/2,40 M
2,10/2,40 M
154
162
12
12
2+1
2+1
8-9
8-9
110
110
5-25
5-25
8-20
8-20
Canna in due sezioni prevista nella versione “casting” e “spinning”, realizzata in carbonio alto modulo giapponese e caratterizzata dalla possibilità di passare da mt 2,10 a mt 2,40 con l’aggiunta di uno spezzone di cm 30 comprensivo di passante. Questa opzione consente di avere due
canne in una e ne favorisce l’utilizzo in ambienti diversi (torrente-fiume-lago). Molto curata l’estetica sobria ed essenziale, con componenti di
pregio come i passanti in pietra in Carburo di Silicio ( ponte basso per la “casting” e ponte alto per la “spinning”), placca porta mulinello a vite in
graphite ( a pistola nella versione “casting”) e impugnatura sdoppiata in neoprene antiscivolo. Il tallone ha la parte inferiore in sughero. Raccomandata da M. Altamura.
This two-piece rod is offered in two versions for casting and spinning. It is made from Japanese high modulus carbon and can be extended
from 2.10 m to 2.40 m with the addition of a 30 cm extension fitted with a guide. This extension system gives two rods in one, allowing the rod to
be quickly adapted to different fishing conditions (stream, river, lake). Aesthetically plain and accurate in every detail, this rod is finished with highgrade components: silicone carbide guides (short-leg for the casting version, long-leg for the spinning version), graphite screw reel seat (triggertype for the casting version), neoprene handle with non-slip double grip and cork butt. Recommended by Marco Altamura.
8
www.milo.it
www.facebook.com/milomclass
www.milo.it/mcmag
Spinning
SR 2B - CASTING E SPINNING
Modello
Cod.
Lungh. mt
Peso gr
Ø mm
N° Sez.
N° Anelli
Ing. cm
Casting gr
Line Rating lbs
Casting
Spinning
370SRC02B
370SRS02B
2,10 M
2,10 M
165
140
11,5
10
2
2
8
8
110
110
5-25
5-21
8-20
8-18
Prestigiosa canna da “spinning” e da “casting” in due sezioni realizzata in carbonio alto modulo giapponese caratterizzata da una spiccata
azione di punta e da un’accattivante veste grafica. Monta passanti in pietra in Carburo di Silicio ( ponte basso per la “casting” e ponte alto per la
“spinning”), placca porta mulinello a vite in graphite ( a pistola nella versione “casting”) , impugnatura sdoppiata in neoprene antiscivolo e calcio
in gomma. Ottimo attrezzo per la pesca del bass da natante o dal belly boat. Raccomandata da Marco Altamura.
Designed to suit both casting and spinning needs, this superb two-piece rod is made from Japanese high modulus carbon and delivers a fast
tip action. It features attractive cosmetics and comes fitted with silicone carbide guides (short-leg for the casting version, long-leg for the spinning
version), a graphite screw reel seat (trigger-type for the casting version) and a neoprene handle with non-slip double grip and rubber butt. Perfect
for bass fishing from boat or belly boat. Recommended by Marco Altamura.
www.milo.it
www.facebook.com/milomclass
www.milo.it/mcmag
9
Spinning
SR 2C / 2D / 2E / 2F - SPINNING
Cod.
Lungh. mt
Peso gr
Ø mm
N° Sez.
N° Anelli
Ing. cm
Casting gr
Line Rating lbs
370SRS02C
370SRS02D
370SRS02E
370SRS02F
2,40 M
2,70 M
3,00 MH
3,30 MH
200
205
225
275
12
13,5
13
14
2
2
3
3
8
8
9
9
125
140
105
105
7-35
10-45
20-60
20-60
8-22
10-25
15-40
15-40
Prestigiosa serie di canne da spinning in due / tre sezioni realizzata in carbonio alto modulo giapponese caratterizzata da grande potenza, precisione, leggerezza e robustezza. Monta passanti
in pietra in Carburo di Silicio ponte alto , placca porta mulinello a
vite in graphite, impugnatura sdoppiata in neoprene antiscivolo
con finitura “camou” e calcio in sughero. Progettate anche per insidiare predatori marini quali spigole e serra o grosse trote e lucci in
fiume e lago. Raccomandata da Marco Altamura.
Made from Japanese high modulus carbon, this range of superb two/three-piece spinning rods combine power and ruggedness with lightness and accuracy. Main features include long-leg
silicone carbide guides, a graphite screw reel seat and a non-slip double-grip neoprene handle with camo finish and cork butt. Specially designed
to target sea predators such as bass and bluefish or to fish for big trout and pike on rivers and lakes. Recommended by Marco Altamura.
SR 1B / 1C / 1D / 1E - SPINNING
Cod.
Lungh. mt
Peso gr
Ø mm
N° Sez.
N° Anelli
Ing. cm
Casting gr
Cimini
Line Rating lbs
370SRS01E
370SRS01B
370SRS01C
370SRS01D
1,98 ML/M
2,10 M/MH
2,40 M/MH
2,70 M/MH
130
130
180
195
11
12
12
13
2
2
2
2
7
7
8
8
102
108
124
140
3-18/5-25
5-25/10-30
6-28/12-35
5-21/14-28
2
2
2
2
5-10 / 8-14
6-12 / 10-20
8-17 /12-25
8-17 / 10-20
Prestigiosa serie di canne da spinning in due sezioni
previste con doppio cimino e quindi con due azioni differenti. Realizzate in carbonio alto modulo giapponese,
sono rivolte principalmente agli amanti del Bass Fishing
sia a piede asciutto che da natante o da belly boat. Hanno
finiture di pregio ed un’accattivante veste grafica tipica dei
prodotti del “Sol Levante”. Montano passanti in pietra in
Carburo di Silicio ponte alto , placca porta mulinello a vite
in graphite, impugnatura sdoppiata in neoprene antiscivolo e calcio in gomma. Possono essere utilizzate sia nella
pesca “finesse” che nel “power fishing”. Raccomandata da Marco Altamura.
This superb range of two-piece spinning rods comes with a choice of two tips providing different actions. Made from Japanese high modulus
carbon, these rods are designed for bass fishing either from the shore or from a boat or belly boat. They feature distinctive Japanese-style cosmetics and top-quality fittings, including long-leg silicone carbide guides, a graphite screw reel seat and a non-slip double-grip neoprene handle with
rubber butt. They can be used also for finesse and power fishing. Recommended by Marco Altamura.
10
www.milo.it
www.facebook.com/milomclass
www.milo.it/mcmag
Spinning
SR 1A / 1B / 1G - CASTING
Cod.
Lungh. mt
Peso gr
Ø mm
N° Sez.
N° Anelli
Ing. cm
Casting gr
Cimini
Line Rating lbs
370SRC01G
370SRC01A
370SRC01B
1,80 ML/M
1,98 M/MH
2,10 M/MH
120
122
126
12
11,5
12
2
2
2
8
8
8
95
102
110
3-18/5-25
4-14/7-21
5-25/10-30
2
2
2
5-10 / 8-14
6-12 / 10-20
6-12 / 10-20
Prestigiosa serie di canne da casting in due sezioni
previste con doppio cimino e quindi con due azioni differenti. Realizzate in carbonio alto modulo giapponese,
sono rivolte principalmente agli amanti del Bass Fishing
sia da riva che da natante o da belly boat. Hanno finiture di
pregio ed un’accattivante veste grafica tipica dei prodotti
del “Sol Levante. Montano passanti in pietra in Carburo di
Silicio ponte basso , placca a pistola porta mulinello a vite
in graphite, impugnatura sdoppiata in neoprene antiscivolo e calcio in gomma. Possono essere utilizzate sia nella
pesca “finesse” che nel “power fishing”. Raccomandata da Marco Altamura.
This superb range of two-piece casting rods comes with a choice of two tips providing different actions. Made from Japanese high modulus
carbon, these rods are designed for bass fishing either from the shore or from a boat or belly boat. They feature distinctive Japanese-style cosmetics and top-quality fittings, including short-leg silicone carbide guides, a graphite trigger-style screw reel seat and a non-slip double-grip neoprene handle with rubber butt. They are ideal also for finesse and power fishing. Recommended by Marco Altamura.
ROLIX SLIM BASS
Cod.
Mod.
Lungh. mt
Peso gr
Ø mm
N° Sez.
N° Anelli
Ing. cm
Casting oz
Line Rating lbs
370RX0168
370RX0180
370RX0019
370RX0210
MONOPEZZO
-
1,68
1,80
1,98
2,10
127
164
168
190
10
11
12
13
2
2
1
2
7
7
8
9
87
95
198
110
3/8-1
3/8-1
3/8-1
3/8-1
12-20
12-20
12-20
12-20
Canna in due sezioni ad innesti, realizzata in carbonio alto modulo ultraresistente. E’ dedicata alla
tecnica del “Bass Fishing” e possiede un’azione super rigida. Indicata per l’utilizzo con fili da 12 a 20 lb.
Monta passanti SIC II ed impugnatura in neoprene con porta mulinello sagomato a vite. Presenta impeccabili rifiniture.
Designed with bass fishing in mind, this two-piece take-apart rod is built on a blank of ultra-strong
high modulus carbon providing a super stiff action. Ideal to be used with 12 to 20 lbs lines, this
rod is accurate in every detail and comes fitted with SIC II guides and a neoprene handle with
moulded screw reel seat.
www.milo.it
www.facebook.com/milomclass
www.milo.it/mcmag
11
Spinning
EXCEL SPIN
Cod.
Lungh. mt
Peso gr
Ø mm
N° Sez.
N° Anelli
Ing. cm
Casting gr
370EX0240
370EX0260
2,40
2,70
196
219
11,5
12
2
2
8
9
125
135
35 max
35 max
Serie in due pezzi, con innesto riportato, meglio noto
come “spigot”. E’ realizzata in carbonio alto modulo e la
struttura di quest’ultimo è a celle a nido d’ape. Monta passanti in SIC II nella doppia versione “low-profile” e
ponte basso, porta mulinello a vite in lega d’alluminio e presa in neoprene sul calcio della base. E’ una
canna che si distingue, sia per l’estetica raffinata che,
in termini tecnici, per essere molto “dura” sotto, ma piuttosto “dolce” in punta. Pregevole, il livello di legature, verniciatura e rifiniture in generale.
Range of two-piece rods with spigot joint, manufactured from honeycomb high modulus carbon. All models are fitted with a combination of low-profile
and low-leg SIC II guides, aluminium alloy screw reel seat and neoprene butt grip. The action is tough in the lower part of the blank but softer in
the tip. The Excel Spin rods feature stylish cosmetics with accurate whippings and top-quality finish.
HYPNOS SPIN
Cod.
Lungh. mt
Peso gr
Ø mm
N° Sez.
N° Anelli
Ing. cm
Casting gr
370HYA210
370HYA240
370HYB240
370HYB270
370HYC240
370HYC270
370HYD270
370HYD300
2,10 - HA
2,40 - HA
2,40 - HB
2,70 - HB
2,40 - HC
2,70 - HC
2,70 - HD
3,00 - HD
123
145
154
170
190
196
238
288
9
9
9,5
10
11
12
13
14
2
2
2
2
2
2
2
2
9
10
9
9
8
8
8
8
110
124
125
138
125
140
140
155
3-12
3-12
10-30
10-30
30-50
30-50
60-100
60-100
Serie di canne, in due pezzi con innesto a spigot, per la pesca a spinning. Sono realizzate in alto
modulo di carbonio e presentano spirali circolari esterne, molto ravvicinate, su entrambi gli elementi.
Si distinguono per le ottime rifiniture, per la rapidità d’azione, per i diametri sottilissimi e per essere
perfettamente bilanciate e maneggevoli, prerogative fondamentali appartenenti alle canne di alto
pregio, quali le “Hypnos” che devono subito balzare all’occhio dell’esperto. Hanno l’impugnatura in
sughero naturale a bassissima porosità, montano passanti in SIC a basso profilo e il porta mulinello a
vite, sagomato nella parte superiore.
This series of two-piece spinning rods with spigot joint is built with high modulus carbon and reinforced with spiral wraps on both sections. Perfectly balanced and easy to handle, these rod offers
ultra-slim diameters and a fast action. They come with a top-quality finish, a low-porosity natural cork
handle, low-profile SIC guides and a screw reel seat moulded on the top.
12
www.milo.it
www.facebook.com/milomclass
www.milo.it/mcmag
Spinning
SALT BASSER XX SUPER HEAVY
Cod.
Lungh. mt
Peso gr
Ø mm
N° Sez.
N° Anelli
Ing. cm
Casting gr
370BA0270
370BA0300
370BA0330
370BA0360
2,70
3,00
3,30
3,60
240
278
303
359
12,5
13
14
16
2
2
2
2
7
7
7
7
138
148
171
185
14-60
14-60
14-60
14-60
SALT BASSER X HEAVY
Cod.
Lungh. mt
Peso gr
Ø mm
N° Sez.
N° Anelli
Ing. cm
Casting gr
370BH0270
370BH0300
370BH0330
2,70
3,00
3,30
238
251
264
12
12,5
13
2
2
2
7
7
7
140
158
172
10-50
10-50
10-50
Canne con fibre polimeriche compattissime che donano all’attrezzo una eccellente risposta in ferrata e una potenza senza pari. L’attrezzo, indicato ad una elite di estimatori, è preciso nel lancio, non
“svirgola”, non dà contraccolpi e le risposte alle sollecitazioni dell’esca sono tutte efficienti, anche
quando l’artificiale è molto lontano da riva. Gli anelli a ponte doppio sono SIC II, affidabili e performanti. L’impugnatura è in neoprene e la placca portamulinello è a vite. In dotazione una custodia rigida con
tracolla regolabile.
Rod featuring an exceptional high modulus carbon construction with ultra compact polymeric fibres ensuring unequalled power and excellent responsiveness on strike. Accurate on casting, this rod
responds smoothly to all the movements of the lure, even at long distance from the shore. Sea spinning is a highly specialised techniques which requires specific technical skills, therefore this rod is intended for a narrow circle of connoisseurs. Features reliable and performing double-legged SIC II
guides, neoprene handle and screw real seat and comes with a rigid holdall with adjustable shoulder strap.
TAKAIDA FINESSE
Cod.
Lungh. ft
Peso gr
Ø mm
N° Sez.
N° Anelli
Ing. cm
Casting gr
370TF0200
370TF0U70
370TF0220
370TF0M73
370TF0237
6,7
7,0
7,3
7,3
7,9
100
83
105
110
88
9
7
10
9
10,2
2
2
2
2
2
9
9
9
9
9
104
110
115
115
122
0,5-5,0
0,3-4,5
0,5-5,0
0,6-7,0
0,6-7,0
Prestigiose canne in due pezzi con innesto a spigot realizzate in carbonio alto modulo.
Concepite appositamente per uno spinning ultra leggero e molto raffinato, con piccoli cucchiaini o con artificiali in silicone, dispongono di un’azione progressiva super rapida e si presentano montate con passanti SIC II a ponte basso, porta mulinello a vite sagomato in graphite, impugnatura sdoppiata in neoprene e gancio “ hook-retainer”. La particolarità dei piccoli anelli sul primo elemento, oltre a favorire i lanci, permette anche
di armonizzare al meglio il grezzo nei recuperi delle prede più impegnative.
This superb range of high modulus carbon two-piece rods with spigot joint is specially designed for ultra-light spinning with small spoons or
silicone lures. They feature short-legged SIC II guides, a moulded graphite screw reel seat, a split-grip neoprene handle and a hook retaining ring.
The action is super fast and progressive and the smaller-diameter guides on the butt section deliver better casting performance and allow for a
smooth curve and bending action when playing large fish.
www.milo.it
www.facebook.com/milomclass
www.milo.it/mcmag
13
Spinning
TECHNOCRAFT SEA BASS
Cod.
Lungh. mt
Peso gr
Ø mm
N° Sez.
N° Anelli
Ing. cm
Casting gr
370TF0212
370TF0273
2,12 MH
2,73 MH
143
190
10
12
2
2
9
9
110
140
10-32
10-32
Canna in due pezzi ad innesti, di elevata fattura, costruita in alto modulo di carbonio. E’ stata progettata per uno spinning in mare dalla barca, rivolto soprattutto alle spigole, ma può anche essere
sfruttata per quello tradizionale in acque dolci. Possiede un’azione “medium – heavy”, è anellata con
passanti in SIC a ponte basso e presenta l’impugnatura in neoprene con porta mulinello sagomato a
vite.
Made from high modulus carbon, this finely-crafted two-piece, take-apart rod has been designed
for sea spinning from boat for bass, but is equally perfect for freshwater predator fishing. Very attractive in cosmetics, the Technocraft comes with a medium-heavy action and features short-leg SIC
guides and a neoprene handle with a moulded screw reel seat.
KERAK SPIN
Cod.
Lungh. mt
Peso gr
Ø mm
N° Sez.
N° Anelli
Ing. cm
Casting gr
370HV0210
370HV0240
370HV0270
370KM0210
2,10 HV
2,40 HV
2,70 HV
2,10 ML
143
162
175
136
10
11,5
12
9
2
2
2
2
9
9
9
9
110
126
139
110
14-36
14-36
14-36
8-22
KERAK SPIN HV - Serie di canne in due pezzi, costruite in high modulus carbon e
concepite per uno spinning con artificiali medio – pesanti. La gamma “Kerak”, contrassegnata dalla sigla “HV”, è proposta in tre metrature, con diametri sottili. Possiedono
un fusto decisamente rigido ed un’azione dura in punta. Sono equipaggiate con l’accoppiata di passanti in SIC low profile e SIC a ponte corto, porta mulinello a vite in lega
d’alluminio bronzata, impugnatura con base in neoprene e gancino ferma amo.
KERAK SPIN ML - Versione unica, per uno spinning con artificiali medio-leggeri. Rispetto al modello “HV”, di cui mantiene l’equipaggiamento simile, questa presenta un’azione ovviamente più “dolce”, in virtù del casting inferiore.
KERAK SPIN HV - Range of high modulus carbon two-piece rods, specially designed for spinning with medium-heavy lures. The “Kerak” range, marked with the
initials “HV”, has low diameters and comes in three lengths. They feature a very stiff
blank and provide a stiff tip action. All rods come fitted with a combination of lowprofile and short-leg SIC guides, screw reel seat made from bronzed aluminium alloy,
neoprene handle and hook retainer.
KERAK SPIN ML - Specially designed for spinning with medium-light lures, this rod comes in one version only. The Kerak Spin "ML" has the same
fittings as the “HV” range, but provides a softer action due to its lower casting weight.
14
www.milo.it
www.facebook.com/milomclass
www.milo.it/mcmag
Spinning
COREGONE ADJ
Cod.
Lungh. mt
Peso gr
Ø mm
N° Sez.
N° Anelli
Ing. cm
370CG0240
2,40 - 3,00
184
9 - 11,5
2
8
111
Canna in carbonio, in due sezioni con cimino telescopico, per la pesca del coregone dalla barca. Estremamente sensibile e precisa, è caratterizzata dalla possibilità di potersi allungare oltre la metratura originale, grazie ad una parte di base telescopica pari a 52 cm. Monta passanti SIC II
a ponte basso, impugnatura in sughero naturale e porta mulinello ad anelli in graphite.
Specially designed to target whitefish from boat, this two-piece carbon rod with telescopic tip is extremely sensitive and precise. The butt
section has a telescopic extension that extends rod length by 50 cm. Main features include short-legged SIC II guides, a natural cork handle and a
graphite slip-ring reel seat.
HOLIDAY 4X4
Cod.
Lungh. mt
Peso gr
Ø mm
N° Sez.
N° Anelli
Ing. cm
Casting gr
370HD0210
2,10
78
8
4
6
52
0-7
Realizzata in carbonio alto modulo è unica nel suo genere per lo spinning ultra leggero estremo. È lunga mt. 2,10 e divisa in quattro sezioni di soli 52 cm. con innesti a spigot di gran precisione.
Lancia da 0 a 7 gr. monta anelli in SIC, manico in sughero con anelli portamulinello scorrevoli per
ottimizzare la bilanciatura della canna. Ha un corredo di quattro vettini sdoppiati, su cui è indicato
l’ uso delle esche ottimali. Insuperabile per lanciare artificiali di peso infinitesimale, è affidabile anche nei recuperi impegnativi.
This high modulus carbon rod for extreme ultra-light spinning has no equal in its class. It’s 2.10
m in length and features 4 sections of 52 cm with precision spigot joints. Provides a casting power
of up to 7 gr. Has SIC guides and a cork handle with reel sliding rings for improved rod balance.
Comes with a kit of four two-piece tips, each tip bearing the indication of the most appropriate bait
to be used. Offers unequalled performance when casting ultra-light lures, but it is also extremely
reliable on difficult retrieves.
www.milo.it
www.facebook.com/milomclass
www.milo.it/mcmag
15
Spinning
HOLIDAY LAKE QUEEN
Cod.
Lungh. mt
Peso gr
Ø mm
N° Sez.
N° Anelli
Ing. cm
Casting gr
370LQ0235
2,35
162
9
4
8
63
4-21
Realizzata in carbonio alto modulo in quattro sezioni con innesto a spigot. La particolare azione leggera-progressiva, la lunghezza di mt. 2,35
e la grammatura da 4 a 21 gr. la rendono adatta a tutte le occasioni di lancio in laghetto. Monta anelli in SIC, impugnatura in sughero.
4-section rod from high modulus carbon with spigot joints. With a length of 2.35 m, a
casting power of 4 to 21 gr. and a light-progressive action this rod covers any casting situation
on lakes. Features SIC guides and cork handle. Closed length 63 cm only.
HOLIDAY RIVER QUEEN SPIN
Cod.
Lungh. mt
Peso gr
Ø mm
N° Sez.
N° Anelli
Ing. cm
Casting gr
370RQ0240
2,35
160
9
4
8
64
10-28
Realizzata in carbonio alto modulo in quattro sezioni con innesto a spigot. La particolare
azione medio-progressiva, la lunghezza di mt. 2,35 e la grammatura da 10 a 28 gr. la rendono
adatta a tutte le occasione di lancio medio in fiume. Monta anelli in SIC, impugnatura in sughero.
This rod features 4 sections from high modulus carbon with spigot joints. With a length of
2.35 m, a casting power of 5 to 15 gr. and a progressive action, this rod is ideal for light casting
on rivers. Fitted with SIC guides and cork handle. Closed length 63 cm only.
16
www.milo.it
www.facebook.com/milomclass
www.milo.it/mcmag
Spinning
HOLIDAY RIVER QUEEN LIGHT
Cod.
Lungh. mt
Peso gr
Ø mm
N° Sez.
N° Anelli
Ing. cm
Casting gr
370HD0235
2,35
160
9
4
8
64
5-15
Canna in carbonio alto modulo in quattro sezioni con innesto a spigot. La particolare azione progressiva, la lunghezza di mt 2,35 e la grammatura da 5 a 15 gr. la rendono adatta a tutte le occasioni di lancio leggero in fiume. Monta anelli in SIC, impugnatura in sughero.
This rod features 4 sections from high modulus carbon with spigot joints. With a length of 2.35 mt. a casting power of 5 to 15 gr. and a progressive action, this rod is ideal for light casting on rivers. Fitted with SIC guides and cork handle.
www.milo.it
www.facebook.com/milomclass
www.milo.it/mcmag
17
Spinning
STRATEGY SPIN TRAVEL 1,50
STRATEGY SPIN TRAVEL 1,80
Cod.
Lungh. mt
Peso gr
Ø mm
N° Sez.
N° Anelli
Ing. cm
Casting gr
370ST0150
370ST0180
1,50
1,80
80
85
9
9
4
4
5
6
43
51
3-10
3-10
Dei piccoli gioielli di tecnologia. Leggere, sottili, sensibilissime, queste le caratteristiche
della serie in carbonio alto modulo studiata per la pesca leggera a corta e media distanza.
La ripartizione in quattro pezzi non provoca perdite di sensibilità e precisione, irrigidisce
leggermente gli attrezzi rendendo ancor più divertente l’azione. Maneggevoli e precise, le
Spin Travel rientrano nel progetto di canne da viaggio Milo e dispongono quindi dei migliori componenti accessori: manico in sughero, portamulinello a vite, innesti spigot precisissimi, verniciatura antigraffio del fusto, anelli SIC II e una pratica custodia rigida.
Slim, lightweight and extremely responsive, these high modulus carbon rods are little
gems of technology specially designed for short and medium-range light fishing. While the
four-section construction does not compromise the rod performance in terms of accuracy
and sensitivity, it makes the tool slightly stiffer resulting in a more exciting fish-playing action. Easy to handle and precise, the Spin Travel rods offer the best features of the Milo “travel range”: cork handle, screw reel seat, precisionground spigot joints, anti-scratch finish, SIC II guides and a practical stiff holdall.
FASTLURE SPINNING
Cod.
Lungh. mt
Peso gr
Ø mm
N° Sez.
N° Anelli
Ing. cm
Casting gr
370FL0198
370FL0210
370FL0240
370FL0270
1,98
2,10
2,40
2,70
144
149
220
230
9,5
10
12
13
2
2
2
2
7
7
8
8
104
111
126
145
7-30
7-30
7-30
7-30
Canna in due pezzi realizzata in carbonio ad alta resistenza, ideale per uno spinning medio - pesante, soprattutto pescando dalla barca. Ha
un’azione progressiva di punta ed è montata con una coppia iniziale di passanti “low profile”, seguita da una serie a ponte basso, tutti con pietra
inscalfibile. Impugnatura in neoprene e porta mulinello a vite. Ottimo rapporto qualità-prezzo.
This two-piece high-strength carbon rod delivers a progressive tip action ideal for medium-heavy spinning, especially when boat fishing. It
features two low-profile guides, one on the butt and one on the second section, followed by a series of short-leg guides, all with scratch-resistant
inserts. Neoprene handle and screw reel seat. True value for money.
18
www.milo.it
www.facebook.com/milomclass
www.milo.it/mcmag
Spinning
SHOBAK SPIN
Cod.
Lungh. mt
Peso gr
Ø mm
N° Sez.
N° Anelli
Ing. cm
Casting gr
370SS0066
370SS0076
370SS0090
1,98
2,28
2,70
128
151
197
10
10,5
11,5
2
2
2
8
9
10
102
118
140
10-30
10-30
10-30
Classica canna in due pezzi, costruita in carbonio high resistance, indicata per gli amanti dello spinning che si avvicinano a questa tecnica di
pesca. Viene prodotta in tre lunghezze, di cui la centrale abbastanza singolare, ma con un casting unico. Possiede un’azione rigida e secca, ma in
situazioni estreme evidenzia una curvatura armoniosa che si protrae lungo tutto il fusto. Monta anelli in SIC II a ponte basso, porta mulinello a vite
ed impugnatura in neoprene, sagomata nella parte inferiore.
Made from high-resistance carbon, this classic two-piece rod is specially designed for spinning beginners. It comes in one casting weight only
and three different lengths, with the middle one being quite unusual. It provides a crisp and rigid action, but under extreme fish-playing situations
it produces a flawless curve over the entire length of the blank. Fitted with low-leg SIC II guides, screw reel seat and neoprene handle moulded in
the bottom section.
RAPSODIA SPINNING
Cod.
Lungh. mt
Peso gr
Ø mm
N° Sez.
N° Anelli
Ing. cm
Casting gr
370RA5210
370RA5240
370RA5270
370RA1210
370RA1240
370RA1270
370RA2210
370RA2240
370RA2270
370RA3210
370RA3240
370RA3270
2,10 S
2,40 S
2,70 S
2,10 M
2,40 M
2,70 M
2,10 H
2,40 H
2,70 H
2,10 U
2,40 U
2,70 U
130
145
180
150
165
200
170
185
220
185
210
240
10
12,5
13,5
10
12,5
13,5
10
12,5
13,5
10
12,5
13,5
2
2
2
2
2
2
2
2
2
2
2
2
8
8
8
8
8
8
8
8
8
8
8
8
105
120
135
105
120
135
105
120
135
105
120
135
5-21
5-21
5-21
10-30
10-30
10-30
20-40
20-40
20-40
30-60
30-60
30-60
Serie di canne in due pezzi realizzate in carbonio alto modulo con finitura satinata opaca antiriflesso e passanti in Alconite , porta mulinello a vite in graphite ed impugnatura in E.V.A. con tallone in sughero alta
densità. Sono previste quattro azioni (Soft- Medium-Heavy-Ultra) per rispondere a tutte le esigenze dello spinner
evoluto. Risultano molto ben bilanciate, rapide in ferrata e
al contempo progressive con il pesce in canna. Ottimo
rapporto qualità-prezzo.
This range of two-piece spinning rods are made from
high modulus carbon with non-glare satin finish. Rod features include Alconite guides, a graphite screw reel seat
and an EVA handle with high-density cork butt. Well balanced with a fast strike-response and a progressive fish-playing action, these rods offer a
choice of four actions (Soft, Medium, Heavy, Ultra) to meet the needs of the most demanding angler. Excellent value for money.
www.milo.it
www.facebook.com/milomclass
www.milo.it/mcmag
19
Spinning
CONCEPT SPINNING LURES
CONCEPT CASTING LURES
Cod.
Mod.
Lungh. mt
Peso gr
Ø mm
N° Sez.
N° Anelli
Ing. cm
Casting gr
370CS1019
370CS1021
370CS1023
370CS1519
370CS1521
370CS1523
370CC0198
Spinning
Spinning
Spinning
Spinning
Spinning
Spinning
Casting
1,98
2,10
2,28
1,98
2,10
2,28
1,98
124
129
141
130
140
150
129
9
9
10
11
11,5
11
10
2
2
2
2
2
2
2
8
8
9
8
8
9
8
105
110
120
104
110
120
104
10-30
10-30
10-30
15-40
15-40
15-40
15-40
Serie di canne ad innesti in due sezioni in versione da spinning e da casting, realizzate in carbonio alto modulo e caratterizzate da un’azione
“fast” adatta principalmente al “Bass Fishing”, ma utilizzabili anche per insidiare altri predatori sia nelle acque dolci che in mare. La componentistica di qualità, prevede l’utilizzo di passanti SIC II con all’interno la pietra in carburo di silicio ad alta dispersione del calore nella versione a doppio
ponte basso per il modello Casting e ponte basso singolo nella versione Spinning. Completano la dotazione l’impugnatura sdoppiata in materiale
E.V.A. di colore nero ed arancio con porta mulinello sagomato in grafite a vite e l’hook retainer per l’aggancio dell’artificiale.
This range of two-section take-apart rods is offered in two versions for casting and spinning. Made from high modulus carbon, they have a fast
action which makes them ideal for bass fishing but also suitable for targeting other fresh and saltwater predators. All rods are finished with highgrade components including SIC II guides with heat-dissipating silicon carbide inserts in two versions - short-leg for casting, long-leg for spinning,
and a black and orange double grip EVA handle complete with a graphite moulded screw reel seat. A small hook retaining ring is placed on the
underside of the rod to secure the fishing lure
CONCEPT SPINNING LURES
Cod.
Lungh. mt
Peso gr
Ø mm
N° Sez.
N° Anelli
Ing. cm
Casting gr
370CS0627
370CS0630
370CS0827
370CS0830
2,70
3,00
2,70
3,00
256
274
267
312
14
16
16
18
2
2
2
2
7
7
7
7
144
158
144
158
60
60
80
80
Gamma di quattro canne che rappresentano la versione “heavy” della stessa serie; sono anch’esse realizzate in carbonio alto modulo in due
sezioni ad innesti indicate per uno spinning decisamente pesante rivolto ai grandi predatori sia delle acque dolci che di mare. La gamma comprende due modelli da mt 2,70 e due modelli da mt 3,00 con differenti range di potenza. La componentistica di qualità prevede l’utilizzo di passanti robusti in SIC II a doppio ponte con all’interno la pietra in carburo di silicio ad alta dispersione del calore, impugnatura mista in materiale
E.V.A. di colore nero e sughero primo fiore con porta mulinello in grafite a vite. Tutti i modelli sono caratterizzati da un’azione molto potente.
This range of four rods represents the ‘heavy action’ version of the Concept series. All rods are two-piece take apart and feature high modulus
carbon blanks with powerful actions, making them ideal for heavy spinning for large fresh and saltwater predators. The range offers two models
in the length of 2.70 m and two models in the length of 3.00 m models providing different casting weights. All rods are finished with high-grade
components including heavy-duty double-legged SIC II guides with heat-dissipating silicon carbide inserts and a high-grade cork and black EVA
foam handle complete with a graphite screw reel seat.
20
www.milo.it
www.facebook.com/milomclass
www.milo.it/mcmag
Spinning
SATANIKA SPINNING
Cod.
Lungh. mt
Peso gr
Ø mm
N° Sez.
N° Anelli
Ing. cm
Casting gr
370SS2210
370SS2240
370SS3210
370SS3240
370SS3270
370SS4210
370SS4240
370SS4270
2,10
2,40
2,10
2,40
2,70
2,10
2,40
2,70
123
140
130
142
152
137
149
191
10
11,2
10
11,5
11,8
10
11,8
11
2
2
2
2
2
2
2
2
6
7
6
7
7
6
7
7
110
123
110
123
138
108
123
138
8-25
8-25
10-30
10-30
10-30
15-45
15-45
15-45
SATANIKA SPINNING HH
Cod.
Lungh. mt
Peso gr
Ø mm
N° Sez.
N° Anelli
Ing. cm
Casting gr
370SP0024
370SP0027
2,40
2,70
213
261
16
16,5
2
2
6
6
125
140
40-80
40-80
Canna in carbonio dall’eccellente rapporto qualità-prezzo. E’ in due pezzi, equipaggiata con passanti SIC II a ponte basso, impugnatura in
neoprene e porta mulinello sagomato a vite. Rappresenta la scelta giusta per tutti coloro che, con una spesa modesta, vogliono avvicinarsi alla
tecnica dello spinning utilizzando comunque un prodotto valido ed affidabile. Quattro le azioni differenti, di cui la più potente, contrassegnata con
la sigla “HH”, disponibile nelle due metrature più lunghe.
This two-piece carbon spinning rod is the perfect choice for beginners who want a reliable, high-quality rod at an affordable price. It is fitted
with short-leg SIC II guides, neoprene handle and moulded screw reel seat and offers a choice of four casting weights. The two longest models
provide the most powerful action, marked with the letters HH. Excellent value for money.
REDHEART TWIN TIPS
Cod.
Lungh. mt
Peso gr
Ø mm
N° Sez.
N° Anelli
Ing. cm
Casting gr
370RD0125
1,25
58
7
2
9
80
1-10
Canna prodotta per lanciare grammature molto leggere. E’ in fibra di carbonio e dispone di due vettini in fibra di vetro. La pronunciata elasticità dell’azione si protrae fino all’impugnatura che è in sughero naturale, il porta mulinello è ad anelli in graphite. Specifica per la pesca al coregone
Carbon fibre rod specially designed for casting ultra-light lures. It provides a supple action that allows the blank to flex all the way down to
the cork handle. It features a ring-type graphite reel seat and comes with a choice of two fibreglass tips. Suitable for lake whitefish.
www.milo.it
www.facebook.com/milomclass
www.milo.it/mcmag
21
Spinning
TERMINATOR SPIN
Cod.
Lungh. mt
Peso gr
Ø mm
N° Sez.
N° Anelli
Ing. cm
Casting gr
370TM0180
370TM0210
370TM0240
1,80
2,10
2,40
117
140
174
11
13
14,5
6
7
8
6
7
8
55
59
60
10- 40
10- 40
10- 40
Canna di ottima fattura, in alto modulo di carbonio, telescopica, con ingombro ridotto. Estremamente curata in ogni particolare, monta passanti originali in SIC, porta mulinello a vite con inserto in legno ed impugnatura in sughero naturale a bassa porosità. L’azione versatile di cui dispone, la rende un best-seller per gli estimatori di questa tecnica, che con questo tipo di attrezzo frequentano spesso luoghi disagevoli.
High modulus carbon telescopic rod with a very reduced packed travel length. Finely crafted and extremely accurate in every detail, the Terminator Spin is fitted with genuine SIC guides, screw reel seat with wood insert and low-porosity natural cork handle. The Terminator Spin has
become very popular among spinning anglers, who can rely on its versatility to cope with the most difficult fishing venues.
EXCEL TELESPIN TRAVELLING
Cod.
Lungh. mt
Peso gr
Ø mm
N° Sez.
N° Anelli
Ing. cm
Casting gr
370EG0165
370EG0180
370EG0210
370EG0240
370EG0270
1,65 L
1,80 ML
2,10 ML
2,40 L
2,70 L
110
119
135
153
178
9,5
11
13
14
16
8
9
9
10
11
6
7
8
9
10
37,5
37,5
37,5
42
45
5-15
10-30
10-30
5-15
5-15
Canna da spinning, telescopica, in carbonio alto modulo e dal ridottissimo ingombro. Questa prerogativa è data dal manico smontabile, che
si innesta nel fusto per mezzo di uno spigot. Possiede un’azione ideale per artificiali medio – pesanti ed esprime anche una buona parabolicità,
difficilmente percepibile all’istante. Ha l’impugnatura in sughero e neoprene, il porta mulinello sagomato a vite ed è anellata con passanti SIC II a
ponte medio. Fornita di custodia.
Range of telescopic spinning rods made from high modulus carbon. They feature a detachable handle that fits to the blank via a spigot joint
making these rods ultra compact. Designed for fishing medium to heavy lures, these rods provide a nice parabolic curve. They come fitted with a
cork and neoprene handle, a moulded screw reel seat and medium-leg SIC II guides. Supplied with case.
22
www.milo.it
www.facebook.com/milomclass
www.milo.it/mcmag
Spinning
KINETIX TELE-SPINN
Cod.
Lungh. mt
Peso gr
Ø mm
N° Sez.
N° Anelli
Ing. cm
Casting gr
370KN0165
1,65
101
9,5
5
4
52
5-25
È la classica canna multifunzione: la potenza di lancio effettiva spazia in varie grammature, rendendola efficace in gran parte delle discipline
dello spinning. È realizzata in segmenti telescopici in carbonio, corredati con anelli guida filo a ponte doppio. Rapida e sensibile consente, grazie
all’ingombro ridotto, un facile trasporto ovunque.
All-round rod offering a variety of casting powers to suit most spinning techniques. Features telescopic carbon sections and double-legged
guides. Quick and sensitive, has a very reduced closed length which makes it very easy to transport in any situation.
www.milo.it
www.facebook.com/milomclass
www.milo.it/mcmag
23

Documenti analoghi

Canne Shimano

Canne Shimano compromessi, per il pescatore esigente che desidera sempre il massimo delle prestazioni. Lesath BX La nuova Lesath BX Spinning è stata progettata senza compromessi e rappresenta tutto il meglio del...

Dettagli

Catalogo Pesca

Catalogo Pesca questa superlativa serie di canne la tradizione con l’innovazione: nasce così una canna da Bass dalle prestazioni straordinarie. I grezzi Phenix Rods™, leggeri e sensibili, sono realizzati su diseg...

Dettagli

Conoscere lo spinning - ER Agricoltura e pesca

Conoscere lo spinning - ER Agricoltura e pesca vedere posti nuovi con pochi amici fidati, di stare a contatto con la natura, perchè si tratta di una disciplina pulita ed ecologica che, se correttamente applicata, si coniuga molto bene con l’amb...

Dettagli

Canne da Barca

Canne da Barca DPAXBT2460 DPAXBT2480 DPAXBT2760 DPAXBT2780 DPAXBT24100 DPAXBT27100

Dettagli