Car alarm DACIA DUSTER 2010 A47.3

Car alarm
Tipo di autovettura ed anno di produzione
Scheda numero
DACIA DUSTER 2010
A47.3
LOCATION OF THE CAR ALARM CONTROL UNIT
Compact control units and sirens: Placed with a stirrup on the metal wall on the left of the battery
(driver side), using the original 6mm diameter bolt (Image A)
Modular control units and accesories: Under the dashboard, driver side.
CAR ALARM SUPPLY
Positive: Red wire (position n. A3) of the 15-pin White connector on the Black central unit, located under the
dashboard driver side. (Image B)
Negative: Dark grey wire (postiton n. A1) of the 15-pin White connector on the Black central unit, located
under the dashboard driver side. (Image B)
POSITIVE IGNITION KEY (+15)
Yellow wire (position n A5) of the 15-pin White connector on the Black centra unit, located under the
dashboard driver side. (Image B)
IMMOBILISER
Starter Motor: Orange wire behind the ingintion key block directly, under the wheel on the right of the
steering column.
REMOTE CENTRAL LOCKING (Connection for RF remote controller alarm only)
Negative Control.
Beige/Black wire (position n. 17) for the LOCKING of the 40-pin Black connector Brown part, on the Black
central unit located under the dashboard driver side.
Grey wire (position n 8) for the OPENING of the 40-pin Black connector Brown part, on the Black central
unit, located under the dashboard driver side.
ARMING OF PASSIVE TYPE ALARM (Connectin with alarm armed by vehicle’s original remote control)
Follow the method of connections attached.
DIRECTION INDICATORS
Green/White wire (position n.A8) of the 15-pin White connector on the Black central unit, located under
the dashboard driver side.
Green/ Red (position n A9) of the 15-pin White connector on the Black central unit, located under the
dashboard driver side.
DOORS AND BOOT PROTECTION
Connect to wires: Green position n. 40 (front doors) and Brown position n. 30 (rear doors and boot) of the
40-pin Black connector Green part, on the Black central unit located under the dashboard driver side.
ATTENTION: Negative control segnals, it is necessary to use the M166 inverter module and separate lines with
diodes.
BONNET PROTECTION
Bonnet:Fit the switch provided, fastened on the iron crossbar, above the headlamp driver side.
WINDOW WINDER
27/09/2010 rev.00Le informazioni riportate su questa scheda sono da considerarsi indicative e da verificarsi prima di eseguire ogni collegamento in quanto
il costruttore puo,’ in qualsiasi momento , introdurre modifiche. In ogni caso la MetaSystem declina ogni responsabilità per eventuali danni arrecati alla
vettura da un montaggio errato.
Car alarm
Tipo di autovettura ed anno di produzione
Scheda numero
DACIA DUSTER 2010
A47.3
FITTING INSTRUCTIONS FOR EASYCAN DIGITAL ALARM
After completing connections, set the control unit for “STATICI” type controls.
Use the Car Alarm Programmer.
Remaining connections see previous diagnam.
FUNCTION
Arming Control
COLOUR CABLE ALARM
COLOUR CABLE CAR
POSITION ON THE CAR
Red/Black
White
B2
Black/Purple
Green
B4
Inhibition
Light blue/Yellow
Beige/Black
17
Inhibition
Red/Yellow
Grey
Disarming Control
A
B
8
15-pin White connector
on the Black central unit
located under the
dashboard driver side.
40-pin Black connector
brown part, on the Black
central unit under the
dashboard driver side.
Red positon A3
(+30)
Dark grey
Position A1 (GND)
Yellow position A5
(+15)
27/09/2010 rev.00Le informazioni riportate su questa scheda sono da considerarsi indicative e da verificarsi prima di eseguire ogni collegamento in quanto
il costruttore puo,’ in qualsiasi momento , introdurre modifiche. In ogni caso la MetaSystem declina ogni responsabilità per eventuali danni arrecati alla
vettura da un montaggio errato.