ribbons and preforms
Transcript
ribbons and preforms
RIBBONS AND PREFORMS Our Company is particularly equipped to produce semifactured products, such as ribbons, cutted preforms and washers made of cored or massive wire in Sn-Pb / Sn-Ag / Sn-Pb-Ag / Indium alloys, etc. RIBBONS Our standard sizes are: Minimum Maximum Thickness mm Wideness mm 0.05 20 6 100 Ø int. Ø ext. Spool’s size mm 60 200 Different sizes can be studied according to the Customer requirement (considering the alloy’s mechanical characteristics). Using ductile alloys like Sn60-Pb40 or Sn50-Pb50, it is possible to produce cored ribbons with different cores colophony based, according to the specific needs. PREFORMS Starting from ribbons as above specified, it is possible to obtain preformed elements by means of cutting, in the shape of disks, squares, rectangles, washers or complex geometries on request. CORED OR MASSIVE WASHERS In case of cored or massive washers, the simplest producing method consists in moulding the washer, starting from the wire. It is necessary to respect some standard parameters, quoted in the following list that correlates the wire’s diameter with the internal washer’s hole. Wire’s Ømm from 0.4 to 0.7 from 0.8 to 0.9 from 0.9 to 1.1 from 1.2 to 1.5 Min.Int. Ømm 1 1.5 2.5 3 Max.Int. Ømm 4 7 8 10 Wire’s Ømm from 1.6 to 1.7 from 1.8 to 2.1 from 2.2 to 2.4 from 2.5 to 3.0 Min.Int. Ømm 4 5 7 10 Max.Int. Ømm 12 15 20 25 Different size can be realized according with customer requirements. naspref4e Rev 04 – 25/10/01 Office: 20128 - Milano Via Pontenuovo, 51 Tel. ++39-2-27200522 r.a. Fax ++39-2-2592549 www.omodeo.it Warehouse: 20128 – Milano Via Cesalpino, 2 Tel. ++39-2-27200522 [email protected] Production plant: 20041 - Agrate Brianza Via Talete, 6 Tel/fax ++39-39-654415 Laboratory: 20134 – Milano Via dei Canzi, 14 Tel ++39-2-21591127 Fax. ++39-2-21592336