44 cilindri graduati forma alta graduated measuring cylinders, tall
Transcript
44 cilindri graduati forma alta graduated measuring cylinders, tall
70787_interno_030-050:70787_interno_030-050 7-11-2007 12:25 Pagina 44 INDEX CILINDRI GRADUATI FORMA ALTA CILINDRI GRADUATI FORMA ALTA Materiale: Polipropilene Realizzati secondo le Norme ISO 6706 - 1981 (E) e BS 5404 Parte 2 1977 in polipropilene speciale ad alta trasparenza; sono autoclavabili a +121°C per 20 minuti e resistono a +100°C durante l’uso continuato. Graduazioni permanenti stampate in rilievo, pareti a trascurabile bagnabilità, completa assenza di menisco, chimicamente più puliti del vetro poiché non danno luogo a cessioni o assorbimenti chimici. Eccellente resistenza chimica; base pentagonale per assicurare un’elevata stabilità. Materiale: PMP (TPX®) Realizzati secondo le Norme ISO 6706 - 1981 (E) e BS 5404 Parte 2 1977 perfettamente trasparenti, autoclavabili, possono essere usati con liquidi a temperature fino a +170°C. Trascurabile bagnabilità e assenza totale di menisco; graduazioni permanenti stampate in rilievo. Chimicamente più puliti del vetro poiché non danno luogo a cessioni o assorbimenti. Eccellente resistenza chimica; base pentagonale per assicurare un’elevata stabilità. GRADUATED MEASURING CYLINDERS, TALL FORM GRADUATED MEASURING CYLINDERS, TALL FORM Material: Polypropylene Conforms to ISO 6706 - 1981 (E) and BS 5404 Part 2 1977. Special polypropylene giving very high translucency. Autoclavable to 121°C for 20 min., continuous work at 100°C. Permanent graduations are moulded in for reproducibility. No wetting. Chemically cleaner than glass. Chemically nonabsorbant. Excellent chemical resistance. Pentagon base for added stability. Material: PMP (TPX®) Conforms to ISO 6706 - 1981 (E) and BS 5404 Part 2 1977. Crystal clear. Autoclavable. Can be used for liquids up 170°C. No wetting. No meniscus. Permanent graduations are moulded in for reproducibility. Chemically cleaner than glass. Chemically nonabsorbant. Excellent chemical resistance. Pentagon base for added stability. EPROUVETTES GRADUÉES FORME HAUTE Matière: Polypropylène EPROUVETTES GRADUÉES FORME HAUTE Matière: PMP (TPX®) Réalisées selon les Normes ISO 6706 - 1981 (E) et BS 5404 (2eme Partie 1977) en polypropylène spéciale, très transparent; autoclavables à 121°C pendant 20 minutes et supportent une température de 100°C pendant utilisation continue. Graduations permanentes en relief, parois hydrorépulsives, absence total de ménisques, chimiquement plus propres que le verre car elles ne donnent pas lieu à cession ou absorptions chimiques. Excellente résistance chimique; base pentagonale pour assurer une grande stabilité. Réalisées selon les Normes ISO 6706 - 1981 (E) et BS 5404 (2eme Partie 1977) parfaitement transparentes; autoclavables, elles peuvent être utilisées avec liquides aux températures jusqu’à 170°C. Parois hydrorépulsives et absence total de ménisque, graduations permanentes en relief. Chimiquement plus propres que le verre car elles ne donnent pas lieu à cession ou absorptions chimiques. Excellente résistance chimique; base pentagonale pour assurer une grande stabilité. CILINDRI GRADUATI FORMA ALTA GRADUATED MEASURING CYLINDERS, TALL FORM EPROUVETTES GRADUÉES FORME HAUTE CILINDRI GRADUATI FORMA ALTA GRADUATED MEASURING CYLINDERS, TALL FORM EPROUVETTES GRADUÉES FORME HAUTE CILINDRI FORMA ALTA CON GRADUAZIONI DI COLORE BLU BLUE GRADUATED MEASURING CYLINDER TALL FORM EPROUVETTES FORME HAUTE AVEC GRADUATION DE COULEUR BLEU 44 CILINDRI FORMA ALTA CON GRADUAZIONE DI COLORE BLU Materiale: Polipropilene Realizzati secondo le Norme ISO 6706 - 1981 (E) e BS 5404 Parte 2 1977 in polipropilene speciale ad alta trasparenza; sono autoclavabili a +121°C per 20 minuti e resistono a +100°C durante l’uso continuato. Graduazioni permanenti, pareti a trascurabile bagnabilità, completa assenza di menisco. BLUE GRADUATED MEASURING CYLINDER TALL FORM Material: Polypropylene Conforms to ISO 6706 - 1981 (E) and BS 5404 Part 2 1977. Special polypropylene giving very high translucency. Autoclavable to 121°C for 20 min., continuous work at 100°C. Permanent graduations. EPROUVETTES FORME HAUTE AVEC GRADUATION DE COULEUR BLEU Matière: Polypropylène Réalisées selon les Normes ISO 6706 - 1981 (E) et BS 5404 (2eme Partie 1977) en polypropylène spéciale, très transparent; autoclavables à 121°C pendant 20 minutes et supportent une température de 100°C pendant utilisation continue. Graduations permanentes parois hydrorépulsives, absence total de ménisques. Art. 1075 1077 1078 1079 1080 1081 1082 1094 Cap. ml 10 25 50 100 250 500 1000 2000 Grad. ml 2 5 10 10 20 50 100 200 Subdivis. ml 0,2 0,5 1,0 1,0 2,0 5,0 10,0 20,0 Tol. ml +/- 0,2 +/- 0,5 +/- 1,0 +/- 1,0 +/- 2,0 +/- 5,0 +/- 10,0 +/- 20,0 O.D. Ø mm 13,5 18 25,5 30,5 41,5 55 66 84 h mm 140 195 199 249 315 361 439 531 Art. 1570 1571 1572 1573 1574 1575 1576 1577 Cap. ml 10 25 50 100 250 500 1000 2000 Grad. ml 2 5 10 10 20 50 100 200 Subdivis. ml 0,2 0,5 1,0 1,0 2,0 5,0 10,0 20,0 Tol. ml +/- 0,2 +/- 0,5 +/- 1,0 +/- 1,0 +/- 2,0 +/- 5,0 +/- 10,0 +/- 20,0 O.D. Ø mm 13,5 18,5 26 31 41,5 55 66 84 h mm 139 195 199 249 315 361 438 531 Art. 2560 2561 2562 2563 2564 2565 2566 2567 Cap. ml 10 25 50 100 250 500 1000 2000 Grad. ml 2 5 10 10 20 50 100 200 Subdivis. ml 0,2 0,5 1,0 1,0 2,0 5,0 10,0 20,0 Tol. ml +/- 0,2 +/- 0,5 +/- 1,0 +/- 1,0 +/- 2,0 +/- 5,0 +/- 10,0 +/- 20,0 O.D. Ø mm 13,5 18 25,5 30,5 41,5 55 66 84 h mm 140 195 199 249 315 361 439 531 70787_interno_030-050:70787_interno_030-050 7-11-2007 12:25 Pagina 45 INDEX GRADUATI E TARATI - GRADUATED AND VOLUMETRIC PLASTICWARE - CONTENEURS VOLUMÉTRIQUES ET GRADUÉS CILINDRI FORMA ALTA CON GRADUAZIONE DI COLORE BLU CILINDRI GRADUATI FORMA BASSA CILINDRI GRADUATI FORMA BASSA Materiale: PMP (TPX ) Realizzati secondo le Norme ISO 6706 - 1981 (E) e BS 5404 Parte 2 1977 perfettamente trasparenti, autoclavabili, possono essere usati con liquidi a temperature fino a +170°C. Trascurabile bagnabilità e assenza totale di menisco. Materiale: Polipropilene Forma bassa, base circolare. Eccellente resistenza chimica. Autoclavabili. Graduazione inalterabile in rilievo. Possono sopportare temperature fino a +120°C. Materiale: PMP (TPX®) Forma bassa, base circolare. Eccellente resistenza chimica. Autoclavabili. Graduazione inalterabile in rilievo. Possono sopportare temperature fino a +170°C. BLUE GRADUATED MEASURING CYLINDER TALL FORM GRADUATED MEASURING CYLINDERS, SHORT FORM GRADUATED MEASURING CYLINDERS, SHORT FORM Material: Polypropylene Low form, circular base. Excellent chemical resistance. Autoclavable. Permanent graduations moulded into cylinders. Can withstand temperatures up to 120°C. Material: PMP (TPX®) Low form, circular base. Excellent chemical resistance. Autoclavable. Permanent graduations moulded into cylinders. Can withstand temperatures up to 170°C. EPROUVETTES GRADUÉES FORME BASSE EPROUVETTES GRADUÉES FORME BASSE Matière: Polypropylène Résistance chimique excellente. Stérilisables en autoclave. Température supportée 120°C. Moulage en une seule pièce avec graduation. Matière: PMP (TPX®) Résistance chimique excellente. Stérilisables en autoclave. Température supportée 170°C. Moulage en une seule pièce avec graduation. ® Material: PMP (TPX®) Conforms to ISO 6706 - 1981 (E) and BS 5404 Part 2 1977. Crystal clear. Autoclavable. Can be used for liquids up 170°C. No wetting. No meniscus. Permanent graduations. EPROUVETTES FORME HAUTE AVEC GRADUATION DE COULEUR BLEU Matière: PMP (TPX®) Réalisées selon les Normes ISO 6706 - 1981 (E) et BS 5404 (2eme Partie 1977) parfaitement transparentes; autoclavables, elles peuvent être utilisées avec liquides aux températures jusqu’à 170°C. Parois hydrorépulsives et absence total de ménisque, graduations permanentes. CILINDRI FORMA ALTA CON GRADUAZIONI DI COLORE BLU BLUE GRADUATED MEASURING CYLINDER TALL FORM EPROUVETTES FORME HAUTE AVEC GRADUATION DE COULEUR BLEU CILINDRI GRADUATI FORMA BASSA GRADUATED MEASURING CYLINDERS, SHORT FORM EPROUVETTES GRADUÉES FORME BASSE CILINDRI GRADUATI FORMA BASSA GRADUATED MEASURING CYLINDERS, SHORT FORM EPROUVETTES GRADUÉES FORME BASSE O.D. Ø mm 13,5 18,5 26 31 41,5 55 66 84 plastilab ® Art. 2570 2571 2572 2573 2574 2575 2576 2577 Cap. ml 10 25 50 100 250 500 1000 2000 Grad. ml 2 5 10 10 20 50 100 200 Subdivis. ml 0,2 0,5 1,0 1,0 2,0 5,0 10,0 20,0 Tol. ml +/- 0,2 +/- 0,5 +/- 1,0 +/- 1,0 +/- 2,0 +/- 5,0 +/- 10,0 +/- 20,0 h mm 139 195 199 249 315 361 438 531 Art. 814 815 816 817 820 821 822 823 Cap. ml 10 25 50 100 250 500 1000 2000 Grad. ml 2 5 10 25 50 100 200 400 Subdivis. ml 0,25 1 2,5 5 10 10 25 50 Ø mm 16 22 29 34 45,5 55,5 70 92 h mm 88 107 143 178 264 305 332 370 Art. 1332 1333 1334 1335 1336 1337 1338 1339 Cap. ml 10 25 50 100 250 500 1000 2000 Grad. ml 2 5 10 25 50 100 200 400 Subdivis. ml 0,25 1 2,5 5 10 10 25 50 Ø mm 16 22 29 34,5 46 56 71 92 h mm 87 107 143 177 263 302 331 369 45