photovoltaic ceramic - EnergyGlass Home page

Transcript

photovoltaic ceramic - EnergyGlass Home page
PHOTOVOLTAIC CERAMIC
SPL - BA - P6
The photovoltaic ceramic with slab function produced
by EnergyGlass were designed for the construction
of photovoltaic ventilated facades, thus exploiting the
aesthetic and functional characteristics of this building technique. These are elegant, robust and reliable products, made to enhance the concept of “functional skin” which is central to modern architectural
principles.
Architectura integration
EnergyGlass photovoltaic ceramics thanks to their
elegant appearance, the absence of the aluminum
frame, and their strength, are ideal for architectural
integration. The availability of colors and of passive tiles manufactured in the same size and with the
same ceramic material, allows implementations that
would have been unthinkable up to now.
The data shown are not binding on the company, which reserves the right to make changes without notice.
Uffici e stabilimento produttivo
Via Domea, 79 – 22063 – Cantù (CO)
Tel: +39 031 4120388 – fax: +39 031 4250105
www.energyglass.eu
[email protected]
[email protected]
PHOTOVOLTAIC CERAMIC
PHOTONICS Power srl
Via Don Gnocchi, 68
21040 Gerenzano (VA) – Italy
Tel. +39 02 96382933
Fax. +39 02 93660678
SPL - BA - P6
www.photonicspower.com
[email protected]
Le misurazioni sono state effettuate in condizioni di prova standard (STC), irraggiamento di 1000W/m2, massa
dell’aria AM 1,5 e temperatura della cella di 25°C
The following were measured in standard test conditions (STC) with radiation at 1000W/m2, an air mass of AM
1.5 and cell temperature at 25°C
Caratteristiche Elettriche
Electrical characteristics
Potenza nominale / Rated power (+/- 3%)
Pnom
205 W
210 W
Tensione a circuito aperto / Open circuit voltage
Voc
31.82 V
32.54 V
Corrente di cortocircuito / Short-circuit current
Isc
8.72 A
8.72 A
Tensione massima potenza / Voltage at max power
Vmp
24.87 V
25.39 V
Corrente massima potenza / Current at max power
Imp
8.26 A
8.27 A
Capacità di carico di corrente inversa / Max reverse current
12 A
Tensione Massima del Sistema / Max system voltage
IEC
1.000 V
Condizioni operative di temperatura / Operating temperature
Coefficienti di temperatura
Temperature coefficients
IEC
Tra -40 °C e +85 °C (-40 °F e +185 °F)
Potenza / Power
Pmp
- 0.45 % /°C
Tensione / Voltage
Voc
-0.32 % /°C
Corrente / Current
Isc
+0.05 % /°C
NOCT*
*Valore misurato con il Backsheet color nero / Value measured with Black backsheet
45 ° C
Dati Meccanici / Mechanical data
Celle / Cells
Tipo / Type
Silicio Poli-cristallino 6” / Multi-crystal silicon 6”
Numero / Number
54 celle/ cells (6 x 9)
Copertura Anteriore / Front cover
3.2 mm (0,125”) Vetro temprato extra chiaro / Extra-clear tempered glass
Scatola di giunzione / Junction box
1 JBox IP-65
Cavi di uscita / Outlet cables
Lunghezza dei cavi / Cable length 1000 mm - Connettori / Connectors MC4
Dimensioni / Dimensions
1500 mm x 1000 mm x 8 mm
Peso / Weight
26 kg (~ 57.3 lb)
Carico Massimo / Max load
> 2800 Pascal (286 kg/m²)
Garanzie, Certificazioni e Conformità / Warranties, Certifications and Compliance
Garanzia / Warranty
25 anni di garanzia sulla potenza / 25-year power warranty
10 anni di garanzia sul prodotto** / 10-year product warranty**
CEI EN 61215 (IEC 61215)
CEI EN 61730-1&2 (IEC 61730-1&2) (test di sicurezza / safety test)
Certificazioni /
Certifications
IEC 61701:1995 Salt Mist Corrosion Testing of PV modules
Ammonia Corrosion Testing of PV modules
Classe di protezione II / Protection class II
CE
Made in EU
Conformità / Compliance
UNI EN 538 UNI EN 539-1 UNI EN 1024 UNI EN 539-2 UNI EN 1304
** Valido solo nel territorio Europeo / Valid only in the European territory
I dati esposti non sono vincolanti per l’azienda, che si riserva di apportare variazioni senza preavviso.
The data shown are not binding on the company, which reserves the right to make changes without
notice.
Manufactured by:
Via Domea, 79 – 22063 – Cantù (CO)
Tel: +39 031 4120388 – fax: +39 031 4250105
[email protected]
[email protected]