EM 2330 INTUMESCENT CLEAR BASE-COAT
Transcript
EM 2330 INTUMESCENT CLEAR BASE-COAT
TECHNICAL DATA SHEET REV.1 – 30.03.00 EM FF1 FIREPROOF CLEAR SYSTEM OF VARNISHING FIRE CLASS OF REACTION : 1st. DENOMINATION : EM EM EM EM 2330 2332 C.60 722 INTUMESCENT CLEAR BASE-COAT FIREPROOF MAT CLEAR TOP-COAT HARDENER AT 100% THINNER GENERAL FEATURES : Fireproof varnishing products, based on satured polyester resins, fit for the treatment of wood when the flame-retardant property is required. PHYSICAL-CHEMICAL FEATURES : VISCOSITY ( FORD C. 8 at 20°C ) DENSITY ( at 20°C ) SOLID CONTENTS POT-LIFE ( at 20°C ) MATTNESS ( glossmeter 60° ) : : : : : EM 2330 EM 2332 25" 1.210 66 % ± 1 3 hs. / 28” 1.170 66 % ± 1 3 hs. 40 APPLICATION : By spraying. Base-coat EM 2330 Sanding of the substrate. 1st coat : EM 2330 added with 100% of EM C.60 and reduced with 50% of EM 722; amount to apply is 180 gr/sqm. Drying-time : at least 12 hours. Sanding of the 1st coat. 2nd coat : EM 2330 added with 100% of EM C.60 and reduced with 25% of EM 722; amount to apply is 150 gr/sqm. Top-coat EM 2332 Drying-time (of the base-coat) : at least 24 hours. Sanding of the base-coat. 3rd coat : EM 2332 added with 100% of EM C.60 and reduced with 20% of EM 722; amount to apply is 150 gr/sqm. Total amount of wet products applied: 480 gr/sqm. PAGINA N.1 VERNICI EGIDIO MILESI S.p.A. Sede Legale: 20149 Milano - Via Marcantonio Colonna, 46 - Stabilimento: 20017 RHO (MI) - Via Olona, 37 Telefono 02932618.1 - Telefax 02932618.300 Follows technical data sheet EM 2230/2232 DRYING - TIME: DUST FREE TOUCH FREE DEEP DRY READY TO SAND : : : : EM 2330 EM 2332 15-20 ' 70-80 ' 24 hs. 12 hs. 15-20 ' 90’ 24 hs. EMPLOYMENTS: These products are suitable for a full varnishing system of flat panels and rounded furniture and fittings both. SPECIAL WARNING/REMARK: the following materials can not be treated with this varnishing system: · ) veneered panels, based on sheared and/or flaked wood, glued by thermoplastic resins. · ) assembled materials, divided into cells or strips structured, including cavity of air or filled with different materials. For these materials, specific tests of fire reaction must be necessarily made by authorized laboratories, in observance of the law. The method of the application and the amount to apply must be fixed for each different case. MAINTENANCE/CLEANING: It is unnecessary a maintenance treatment if the film is undamaged. It is possible clean the surface with neutral or mild detergent. WARNING: Shake energetically the products before the use.. Take care to have thoroughly mixed the two components (varnish and hardener) before to add the thinner. It is not possible to apply the products without the adding of the hardener. The top-coat EM 2332 is not overcoatable: if it was necessary a 2nd coat of top-coat, the 1st one should be completely dried and lightly sanded before to apply. VERNICI EGIDIO MILESI S.p.A. Sede Legale: 20149 Milano - Via Marcantonio Colonna, 46 - Stabilimento: 20017 RHO (MI) - Via Olona, 37 Telefono 02932618.1 - Telefax 02932618.300 PAGINA N.2