ESTASTIR: Polistirolo • Polystyrene
Transcript
ESTASTIR: Polistirolo • Polystyrene
E S TA S T I R : Polistirolo • Polyst yrene ESTASTIR: Polistirolo • Polystyrene Estastir è un compound dedicato al Polistirolo per applicazione termoformatura, in grado di garantire elevate prestazioni sia in termini di processo che in termini di prodotto finito. Estastir is a compound dedicated to the Polystyrene in the application thermoforming, that is able to assure high performances both in terms of processing and in terms of finished product. In particolare l’uso di Estastir utilizzato nella produzione di piatti termoformati in polistirolo in percentuali non inferiori al 10% consente di ottenere un aumento della produttività unito ad un consistente aumento delle proprietà meccaniche del prodotto finito, inoltre le straordinarie caratteristiche del prodotto ne permettono l’utilizzo anche per la produzione di bicchieri e bicchierini. L’eccezionale aumento della rigidità del prodotto unito con il mantenimento delle caratteristiche elastiche consentono la diminuzione degli spessori mantenendo il peso tipico del prodotto standard. Inoltre le caratteristiche tipiche dell’Estastir eliminano i fenomeni di instabilità dimensionale come il ritiro e lo svergolamento. Tutto questo, unito all’economicità dell’Estastir rendono questo prodotto irrinunciabile per tutti coloro che cercano qualità e competitività per i loro prodotti. In particular the use of Estastir in the production of Polystyrene thermoformed dishes, in percentages not below the 10 %, allows to obtain an increase of the throughput together with a sensible improvement of the mechanical properties of the end product, besides this the outstanding characteristic of the material suggest the use also in the production of cups . The important increase of the stiffness, keeping the elasticity and the impact properties allows a decrease in the wall thickness keeping that typical weight of the standard products. The typical characteristic of the Estastir are able to cancel the possibility of dimensional instability like shrinkage and warpage. What above, together with the economical advantage make of the Estastir the perfect material for the one’s that are targeting quality and competitiveness for their products. FI-PLAST s.r.l. • Via Vignolo, 55 • 21050 Gorla Maggiore (VA) • Tel. +39 0331 607 815 • Fax. +39 0331 366 164 www.fiplast.it