Manuale utente - ITA
Transcript
Manuale utente - ITA
DV7411EM_LGEIS_ITA LETTORE DVD MANUALE DELL'UTENTE MODELLO : DVD-630 Leggere attentamente l'intero manuale di istruzioni prima collegare, utilizzare o regolare questo prodotto. di Sito Internet: www.melchioni.it Precauzioni di sicurezza Dichiarazione di conformita ATTENZIONE La societa Melchioni PERICOLO DI FOLGORAZIONE NON APRIRE S.p.A. dichiara che il prodotto lettore DVD, IRRADIO, DVD-630 e costruito in conformita alle prescrizioni del D.M.n˚548 del 28/8/95, pubblicato sulla - G.U.n˚301 del 28/12/95 ed in ATTENZIONE: PER RIDURRE IL RISCHIO DI FOLGORAZIONE NON RIMUOVERE IL PANNELLO quanto indicato nell'art.2, particolare comma e conforme a 1 dello stesso - descreto. NON CONTIENE PARTI UTILIZZABILI DALL'UTENTE. PER LE RIPARAZIONI CONSULTARE PERSONALE SPECIALIZZATO. Note sui diritti di Il fulmine con la punta a freccia all'interno di un triangolo equilatero avverte l'utente della presenza di tensioni pericolose sprovviste di isolamento all'interno del prodotto, sufficientemente potenti da causare il rischio di folgorazione alle persone. Il punto esclamativo all'interno di un triangolo equilatero avverte l'utente della presenza di istruzioni importanti relative alla manutenzione (assistenza) fornite con la documentazione in dotazione. AVVERTENZA: PER RIDURRE IL RISCHIO DI INCENDI O FOLGORAZIONE, NON ESPORRE QUESTA APPARECCHIATURA ALLA PIOGGIA O AVVERTENZA : Non installare spazio limitato, ad esempio una ALL'UMIDITA. questo apparecchio libreria o una in uno La legge proibisce copiare, trasmettere, mostrare, trasmettere via cavo, riprodurre in pubblico e noleggiare senza autorizzazione il materiale protetto da diritti di riproduzione. Questo prodotto e dotato della funzione di protezione dalla registrazione sviluppata da Macrovision. I segnali di protezione dalla registrazione sono presenti su alcuni dischi. Durante la registrazione e la riproduzione di questi dischi su un VCR, l'immagine apparira danneggiata. Questo prodotto incorpora tecnologie di protezione del copyright protette da alcuni brevetti degli Stati Uniti e da altri diritti di proprieta intellettuale di proprieta di Macrovision Corporation ed altri titolari di diritti. L'uso della tecnologia di protezione di diritti di riproduzione deve essere autorizzato dalla Macrovision Corporation, solo per uso domestico ed altre visioni limitate, salvo diversa autorizzazione da parte della Macrovision Corporation. La scomposizione della programmazione o il disassemblaggio sono proibite. struttura simile. NUMERO SERIALE: Il dell'unita. Il e non e numero disponibile di PERICOLO: Digital Video Disc Lettore utilizza Per assicurare l'uso corretto di contattare di un Nel caso sistema laser. su e conservarlo per futura che l'unita necessiti di servizio di assistenza autorizzato riparazione, (cf. Procedura assistenza). L'uso di comandi o regolazioni o l'esecuzione di procedure quelle specificate in questa documentazione possono causare gravi rischi di esposizione a radiazioni pericolose. diverse da Per evitare l'esposizione diretta al raggio laser, non tentare di aprire la parte interna dell'apparecchio. Il raggio laser e visibile se l'apparecchio viene aperto. NON GUARDARE IL RAGGIO LASER. PERICOLO: L'apparecchio non deve essere esposto a gocce o d'acqua e nessun oggetto contente liquidi, ad es. vasi, essere appoggiato su di esso. schizzi deve Questo prodotto e conforme alle norme interferenze radio DIRETTIVE CEE 89/336/EEC, 93/68/EEC 2 e 73/23/EEC. sulle altre. Si e di seriale si trova sul retro esclusivamente consiglia conservare a questa unita di annotare questa guida qui N. Modello le come acquisto permanente. N. Seriale questo prodotto, leggere attentamente il manuale dell'utente consultazione. un numero appartiene informazioni richieste Questo riproduzione: di ___________________________________ ___________________________________ prova Sommario Funzionamento Introduzione Precauzionidisicurezza....................2 Sommario................................3 Primadell'uso...........................4-5 Dischiriproducibili.........................4 Precauzioni.............................5 Notesuidischi..........................5 Simboli................................5 PannellofrontaleeFinestradisplay . . . . . . . . . . .6 Telecomando..............................7 Pannelloposteriore.........................8 con CD audio e disc MP3/WMA Riproduzione di un CD audio e disc NotasulleregistrazioniMP3/WMA Preparazione . . . . Primadell'uso..........................11-14 Spiegazionegenerale....................11 DisplayschermoTV......................11 Impostazioniiniziali....................12-14 12 Impostazioni iniziali: funzioni generali Lingua.............................12 Immagine..........................12 . . . . . . Suono.............................13 . . . . . . . . . . 18 18 .18 Pausa.............................19 .19 Passaggioadun'altratraccia. RipetiTraccia/Tutto/Off.................19 . . . . . . . . . . Ricerca............................19 Casuale............................19 RipetiA-B..........................19 3DSurround........................19 CambiodiCanaleAudio...............19 FunzionamentoconJPEGDisc. VisualizzazionediunJPEGdisc Collegamenti............................9-10 CollegamentoaunaTV...................9 10 Collegamento ad apparecchiature opzionali . MP3/WMA . . . . . . . . . . . . . . . . . . . . . . . .20 .20 PassaggioadunaltroFile..............20 Fermoimmagine.....................20 Immaginespeculare..................20 Immagineruotata.....................20 .20 NotesulleRegistrazioniJPEG. Riproduzioneprogrammata.................21 Riproduzione programmata con CD audio . . . . . . . . . eMP3/WMA...........................21 Tracce Ripetizione Cancellare Programmate . . . . . . . traccia dall'Elenco programma Cancellazione completa dell'Elenco programma una . . . . . 21 21 21 Altro..............................13 Informazioniaggiuntive.....................22 .22 UltimeImpostazioniinMemoria. Controlloparentale...................14 Salvaschermo..........................22 . . . . . . . . . . . SistemaSelezionare.....................22 Funzionamento FunzionamentoconDVD................15-17 RiproduzionediunDVD..................15 Caratteristichegenerali...................15 .15 PassaggioaunaltroTITOLE. .15 PassaggioadunaltroCAPITOLO. . . . . . . . . . . . . . . . . Riferimenti Risoluzionedeiproblemi...................23 ElencoCodiciLingue......................24 ElencoCodicePaese......................25 Specifiche..............................26 Ricerca............................15 Fermo immagine e riproduzione per fotogrammi 16 Rallentatore.........................16 . Simboli delle istruzioni Casuale............................16 Ripeti..............................16 RipetiA-B..........................16 RicercaTempo......................16 3DSurround........................16 Rischi di danno all'unita stessa o altro danno materiale. Caratteristiche speciali di funzionamento di questa unita. Zoom..............................17 Ricercasegnalibro....................17 CaratteristicheSpecialiDVD................17 Suggerimenti e consigli per facilitare l'uso. Menutitolo..........................17 Menudisco.........................17 Angolodiripresa....................17 CambiodiLinguaAudio................17 Sottotitoli...........................17 3 INTRODUZE Prima dell'uso Dischi Termini relativi ai dischi riproducibili Titolo (solo DVD) principale o il DVD Il film (disco8cm/12cm) materiale addizionale sul film materiale che lo accompagna, il o l'album musicale. ogni titolo e assegnato un numero di riferimento titolo, per poterlo localizzare facilmente. Ad CD Audio (disco8cm/12cm) Questa unita IMAGE CD, MP3, WMA, riproduce CD-R o o inoltre DVD-R, DVD±RW, Kodak audio, CD-RW contenenti titoli File JPEG. Notes -- Alcuni dischi CD-R/RW (o DVD-R/±RW) non possono riprodotti su questa unita, a causa delle condizioni di registrazione o del disco stesso. L'unita non puo riprodurre dischi CD-R/RW che non contengono dati o contengono tipi di dati non in formato MP3 e CD-DA. Non applicare etichette adesive su nessuna delle due superfici (il lato registrato o quello con l'etichetta) di un disco. Non usare CD dalla forma irregolare (ad es. ottagonali o a forma di cuore). essere -- -- Potrebbero causare danni al funzionamento. Nota sui DVD Alcune operazioni essere state intenzionalmente bloccate dai di riproduzione di DVD potrebbero produttori del software. Dato che questa unita riproduce DVD a seconda del contenuto immesso nel disco dai produttori del software, alcune funzioni di riproduzione dell'unita potrebbero essere assenti (o presenti).Consultare anche le istruzioni in dotazione con i DVD. Alcuni DVD prodotti per scopi promozionali potrebbero riproducibili su questa unita. Codice area del lettore DVD e non essere dei DVD Questo lettore DVD e progettato e fabbricato per del software DVD codificato per l'area "2". Il codice area sulle etichette di alcuni la riproduzione 2 dischi DVD indica quale tipo di lettore puo riprodurli. puo riprodurre solo dischi indicati con "2" o "ALL". Tentando di riprodurre qualsiasi altro disco, apparira sullo schermo il messaggio "Controllare codice Questa unita area". Alcuni dischi DVD non hanno un codice area sull'etichetta, anche se la loro riproduzione e comunque protetta da limitazioni di area. 4 Capitolo (solo DVD) Una sezione di un film o di un album piu piccola di un titolo. Un titolo e composto da uno o piu capitoli. Ad ogni capitolo e assegnato un numero di riferimento capitolo, per poterlo localizzare facilmente. I capitoli potrebbero non essere presenti su alcuni dischi. n essere presenti su alcuni dischi. Traccia (CD Audio) sono parti Le tracce musicale su un numero di un film o di un programma CD audio. A ciascuna traccia e assegnato di traccia, che ne permette la localizzazione. Prima dell'uso (segue) Conservazione dei dischi Precauzioni Dopo l'uso, Maneggiare l'unita Spedizione dell'unita Sono utili la scatola dell'unit . Al fine di e i materiali da garantire all'origine imballaggio originali protezione, la massima imballare l'unit nello stesso modo imballata conservare il disco nella sua confezione. Non esporre il disco a luce solare diretta o fonti di calore. Non lasciarlo in una macchina parcheggiata con cui esposta alla luce solare diretta, nella quale potrebbe un notevole aumento della temperatura. verificarsi stata Pulizia dei dischi in fabbrica. Posizionamento dell'unita La riproduzione potrebbe causare distorsioni delle immagini o dell'audio di TV, VCR o radio poste nelle vicinanze. In questo caso, posizionare l'unit lontano dalla TV, VCR o radio, o spegnere l'unit dopo aver estratto il Le impronte e la polvere sul disco possono causare immagini di scarsa qualit e distorsione del suono. Prima dell'uso, pulire il disco con un panno pulito. Passare il panno dal centro verso l'esterno del disco. disco. Pulizia delle superfici esterne liquidi volatili (ad esempio spray insetticida) vicino all'unit . Non lasciare prodotti in gomma o plastica a contatto dell'unit per lunghi periodi: potrebbero lasciare segni sulla superficie. Non usare Non Pulizia dell'unita Utilizzare un panno morbido e asciutto. Se le superfici sono utilizzare un panno morbido leggermente sporche, inumidito detergente delicata. solventi forti come alcool, benzina o acquaragia, potrebbero danneggiare la superficie dell'unit . con una solventi forti soluzione Non come alcool, benzina disponibili in commercio o o spray Simboli usare che Display Il simbolo chiara Ottenere solventi antistatici per dischi in vinile. Pulizia del cassettino molto usare acquaragia, un'immagine Il lettore DVD un dispositivo di precisione ad alta tecnologia. Se la lente ottica del pick-up e gli elementi del gruppo conduttore del disco sono sporchi o usurati, la qualit dell'immagine scarsa. Si consiglia un'ispezione e manutenzione regolare ogni 1000 ore di utilizzo. (A seconda dell'ambiente operativo.) Per ulteriori dettagli si prega di rivolgersi al rivenditore pi vicino. simboli " " potrebbe apparire sullo schermo significa che la TV durante il funzionamento. L'icona funzione illustrata in questo manuale utente disponibile su quel disco DVD specifico. non Simboli per le istruzioni del disco Una sezione il cui titolo presenta uno dei seguenti applicabile solo al disco rappresentato dal simboli simbolo. DVD Note sui dischi CD Maneggiare i dischi Non toccare il lato registrato Maneggiare il disco superficie. MP3 del disco. dai bordi per non lasciare impronte DVD CD Audio Disco MP3 WMA Disco WMA. JPEG Disco JPEG . sulla Non incollare carta o nastro adesivo sul disco. 5 INTRODUZE Pannello frontale e Finestra POWER (ALIMENTAZIONE) Accende (ON) o spegne (OFF) display Forward Skip/Scan ( T / R ) capitolo/traccia. Passa al PROSSIMO il lettore. Per la ricerca veloce, tenere premuto per due secondi. Indicatore di stato Quando il lettore DVD acceso, la luce verde. Reverse Passa all'inizio del capitolo/traccia Skip/Scan ( Q / S ) o al capitolo/traccia attuale PRECEDENTE. Per la ricerca veloce all'indietro, tenere premuto per due secondi. Termina la STOP(9) riproduzione. PAUSE(;) Interruzione temporanea della riproduzione / premere ripetutamente per la riproduzione per singolo fotogramma. Avvia la OPEN/CLOSE Apre Vassoio Inserire o PLAY(2) riproduzione. (APRI/CHIUDI) ( / ) portadisco. chiude il vassoio portadisco qui il disco. Finestra del display Mostra lo stato attuale del lettore. Sensore telecomando ANGOLO attivo TITOLO indica il numero del titolo corrente CHP/TRK Indica il DVD numero del capitolo o traccia corrente. DVD inserito Indica la durata totale della CD Audio CD inserito MP3 Disco MP3 o della WMA inserito riproduzione PROG. La fino a riproduzione questo ripetizione programmata RANDOM Indica la funzione casuale / la durata momento La attivata riproduzione attivata corrente del lettore: Riproduzione, Pausa, Indica la modalit ecc. di MP3 6 CD DVD TITLE CHP/TRK PROG. ripetizione RANDOM ALL AB Telecomando MARKER Segna con un (INDICATORE) indicatore scelta della un punto a riproduzione. (ALIMENTAZIONE) (ON) o spegne (OFF) il lettore DVD. lingua o un dell'audio canale audio Permette di entrare (DVD) (CD). (SOTTOTITOLI) lingua dei sottotitoli. numero o un ; ) ? ? SKIP/SCAN all'indietro ? * Tenere premuto il pulsante per SELECT/ENTER (SELEZIONA/INVIO) SLOW(,/.) Riproduzione al rallentatore (destra/sinistra/alto/basso) menu SETUP o Selezionare ? ? disco DVD. TITLE Visualizza il titoli del menu. 1234 Indietro/Avanti MENU ) circa due secondi. Conferma la selezione del un S ( capitolo/traccia corrente o torna capitolo o traccia precedente. al schermo TV di ) del DISPLAY menu T Ricerca all'indietro* / torna all'inizio Accede alla visualizzazione sullo ? ? del menu REPEAT Ripete disco, se presente. una voce il (RIPETI) capitolo, la traccia, il titolo o tutto. A-B Ripete la sequenza. (IMPOSTAZIONI) menu impostazioni. ? rimuove il RETURN - ( ?PLAY(2) Avvia la riproduzione. Interrompe temporaneamente riproduzione / premere ripetutamente per la riproduzione per singolo fotogramma. Visualizza SKIP/SCAN in avanti Ricerca in avanti* / passa al prossimo capitolo o traccia. la Accede al un ? ? ( menu (Ricerca Indicatori). menu. video. PAUSE/STEP di traccia dall'elenco indicatore dal Selezionano le voci numerate di STOP(9)? riproduzione. Termina la Rimuove il programmi Tasti numerici 0-9 le tracce in sequenza casuale. Ingrandisce l'immagine uscire dalla programmi. MARKER SEARCH (ANGOLO) l'angolo di ripresa del DVD, se disponibile. ZOOM o CLEAR RANDOM Riproduce (APRI/CHIUDI) portadisco. chiude il vassoio modalita modifica ANGLE Seleziona o RICERCA INDICATORE. PROGRAM SUBTITLE Seleziona la menu Apre AUDIO Seleziona la (RICERCA) Visualizza il OPEN/CLOSE POWER Accende SEARCH Rimuove il menu (RITORNO) impostazioni. ? Installazione della batteria del telecomando Raggio di Funzionamento del Telecomando Puntare il telecomando telecomando verso il sensore Rimuovere il AAA premere i pulsanti. Distanza: Circa 7 metri (23') dalla parte anteriore del telecomando. Angolo: ogni anteriore del telecomando. direzione dalla parte della batteria due batterie R03 e Circa 30° in coperchietto sul retro del telecomando ed inserire del , in (AAA) con i poli posizione corretta. Attenzione Non contemporaneamente batterie vecchie e mai contemporaneamente tipi diversi di batterie (standard, alcaline, ecc.). 7 usare nuove. Non mai usare INTRODUZE Pannello posteriore COASSIALE Collega ad (Jack digitale audio in uscita) apparecchiatura audio digitale (coassiale) Cavo Alimentazione AC Collega Collega ad un (Destra/Sinistra) amplificatore, ricevitore ad una fonte di alimentazione. USCITA AUDIO o impianto stereo. USCITA VIDEO Collega ad una TV con entrate video. Jack verso Collega Non toccare i pin interni del jack sul pannello postepotrebbe danneggiare riore. La scarica elettrostatica l'unita in modo permanente. 8 ad TV una (SCART) TV con jack SCART. Collegamenti Suggerimenti Retro della TV Esistono diversi modi per collegare il lettore, a seconda della vostra TV o dell'altra apparecchiatura al quale desiderate collegarlo. Utilizzare collegamenti descritti di seguito. Consultare i manuali della vostra solo uno o VIDEO INPUT dei R L PREAZION TV, VCR, Sistema apparecchiatura per creare ilo collegamento migliore. Per una migliore riproduzione del suono collegare i jack USCITA AUDIO del lettore ai jack ENTRATA AUDIO dell'amplificatore, ricevitore, stereo o apparecchio audio/video. Cf. "Collegamento ad apparecchiature opzionali" a pagina 10. stereo SCART INPUT AUDIO INPUT altra AV T Attenzione -- Accertarsi che lettore DVD sia collegato direttamente alla TV. Sintonizzare la TV sul corretto canale video in entrata. -- Non collegare il jack USCITA AUDIO del lettore DVD jack entrata phono (giradischi) dell'impianto stereo. Non collegare il lettore DVD attraverso il VCR. L'immagine DVD potrebbe essere distorta dal sistema di protezione anti copia. al -- Collegamento ad una TV Retro del lettore DVD Eseguire uno dei seguenti collegamenti, a seconda delle capacita della vostra apparecchiatura. Collegamento 1 Collegare il video jack VIDEO OUT del lettore DVD al Entrata Video della TV tramite il dotazione 2 Collegare cavo jack video in (V). i jack AUDIO OUT destra/sinistra del jack audio destra/sinistra della TV lettore DVD ai (A) tramite i cavi audio in dotazione. Collegamento SCART Collega il jack SCART TO TV del lettore DVD ai corrispondenti jack in entrata della TV utilizzando cavo SCART opzionale (T). un 9 Collegamenti (Continua) Collegamento ad apparecchiature opzionali Collegamento ad un amplificatore stereo analogico a due canali o Dolby Pro Logic Pro Logic Retro del lettore DVD ll/ Collegare i jack USCITA AUDIO destra/sinistra del lettore DVD ai jack in entrata audio destra/sinistra del vostro amplificatore, ricevitore o impianto stereo tramite i cavi audio in dotazione (A). Collegamento ad un amplificatore dotato di due digitali (PCM) o ad un ricevitore canali stereo X A Audio/ Video dotato di decoder multicanale MPEG 2 (Dolby DigitalTM, 1 o DTS) Collegare uno dei jack in uscita DIGITAL AUDIO (coassiali X) del lettore DVD al jack corrispondente sul vostro amplificatore. Utilizzare un cavo audio digitale opzionale (coassiale X). Attivare l'uscita 2 Digitale" Suono a digitale pagina 13) del lettore (cf. "Uscita Audio . digitale multicanale Un collegamento digitale multicanale offre la migliore qualita sonora. E necessario un ricevitore multicanale Audio/Video che supporta uno o piu formati audio supportati dal vostro lettore DVD (MPEG 2, Dolby Digital e DTS). Controllare il manuale del ricevitore e i logo sulla parte frontale di esso. Avvertenza: Secondo l'Accordo di Licenza sara in output DTS stream DTS. digitale DTS, l'uscita digitale out se e selezionato l'audio Note -- Se il formato audio dell'uscita alle capacita un suono -- Il digitale non corrisponde del vostro forte e ricevitore, il ricevitore produrra distorto, o nessun suono. Digital Surround a sei canali attraverso collegamento digitale puo essere ottenuto solo se ricevitore e dotato di un decodificatore Digital suono il Multicanale. -- Per visualizzare il formato audio del DVD corrente sul Display 10 schermo TV, premere AUDIO. COAXIAL DIGITAL INPUT R L AUDIO INPUT Amplificatore (ricevitore) Prima dell'uso Premere 1 / 2 per cambiare le 3 Avvertenza Prima di utilizzare il telecomando, premere il pulsante DVD o TV per selezionare Il dispositivo che si desidera delle funzioni. Spiegazione generale operazioni speci- Ripeti TITLE permettono solo operazioni limitate durante la riproduzione. In questo caso, appare un simbolo sullo schermo TV, per indicare che l'operazione non o permessa dal lettore DVD CHAPT sul disco. disponibile generale della Titolo Ripeti Capitolo Ripeti AB A-B Ripeti Off OFF Riprendi schermo TV Display Lo stato o non Azione riproduzione pu non consentita non offrono l'intero Premere DISPLAY durante la 1 2 La o non disponibile Note Alcuni dischi Display da questo punto essere visualizzato sullo schermo TV. Alcune voci possono essere modificate dal menu. Funzionamento del PREAZION Icone di feedback temporaneo Questo manuale riporta le istruzioni base per utilizzare il lettore DVD. Alcuni DVD richiedono di E anche possibile usare i tasti numerici per impostare i numeri (ad es. il numero del titolo). Premere SELECT/ENTER per impostare alcune utilizzare. fiche impostazioni una voce. schermo TV Display schermo TV qui raffigurato. Se riproduzione. il non viene premuto alcun pulsante per 10 secondi, schermo TV scompare. Display Premere voce 3 / 4 per selezionare una voce. selezionata viene evidenziata. DVD Voci Funzione (Premere Numero titolo 1/3 Numero capitolo Numero ricerca 1 /12 a 0:20:09 tempo 1 / di capitoli, e numero il Digitale 5.1 CH NORM. corrente di e il numero totale capitolo desiderato. Mostra il tempo di riproduzione trascorso punto secondo i minuti trascorsi. lingua Suono capitolo numero e cerca un Indica la 1/1 del passa al codifica, Angolo Metodo di selezione Visualizza il D OFF desiderata) 1 / 1 ENG ABC voce Visualizza il numero del titolo corrente e il numero totale di titoli, e passa al numero di titolo desiderato. Lingua dell'audio e modalit Audio Output Lingua dei sottotitoli 3/4 per selezionare la e modifica corrente numero dell'audio, il metodo di e e dell'angolo corrente, il numero totale permette di cambiare il numero di angolo. numero Mostra la modalita di audio corrente modifica Numerica,SELECT/ENTER 1/2,o l'impostazione. degli angoli e 2,oNumerica, SELECT/ENTER AUDIO di canale Mostra la lingua corrente dei sottotitoli modifica l'impostazione. Mostra il 2,oNumerica, SELECT/ENTER l'impostazione. 1/2,o SUBTILE 1/2,o ANGLE 1/2,o SOUND 11 Prima dell'uso (Continua) Lingua Impostazioni iniziali E possibile regolare proprie impostazioni personali del menu Selezionare le sul lettore. una lingua per il menu impostazioni. Scegliendo SETUP appare questo menu. Linguaggio Impostazioni iniziali: funzioni Premere SETUP 1 Appare il menu generali Francese Restrizione Tedesco Codice Di Italiano Regione Audio Linguaggio Inglese Menu Disco Francese Restrizione Tedesco Codice Di Spagnolo Regione Uscita Audio Altri Immagine Cinese Menu Polacco Ungherese Digitale Rapporto D'aspetto Altri-------- 4:3 Letterbox Altri gata ha Premere 3/4 per selezionare la voce desiderata. Lo schermo visualizzer le impostazioni correnti per e le impostazioni alternative. Mantenendo selezionata la voce, premere l'impostazione desiderata. 2 e 3 4 3/4 per selezionare : Selezionare questa film immagini del l'immagine. 4:3 Panscan: Selezionare apparecchio (i due lati 16:9 Wide Premere SETUP o PLAY per uscire impostazioni. : Selezionare se 4:3 Letterbox 4:3 Panscan Menu Disco 16:9 Wide Linguaggio Audio una DVD lingua Linguaggio per il menu, l'audio e i sottotitoli Default : : Seleziona la lingua originale del disco. lingua, inserire con i tasti Per selezionare un'altra numerici il dei codici corrispondente numero lingua a pagina 24. Se a 4 cifre secondo l'elenco stato digitato sbagliato, premere CLEAR. Linguaggio Audio Sottotitoli Disco Default Inglese Menu Disco Francese Restrizione Tedesco Codice Di Spagnolo Regione Rapporto D'aspetto Linguaggio Menu Italiano Cinese Polacco Uscita Audio Digitale Ungherese Altri-------- Altri 12 un codice Menu Uscita Audio del disco. Altri Regione Rapporto D'aspetto del disco Lingua la Sottotitoli Disco Restrizione Selezionare e sotto un riprodotto nella stessa sono tagliati). TV collegata un dell'immagine Codice Di Lingua la TV colle- collegato addizionali. passi RETURN , quando to in modalit Pan & Scan viene modalit se TV tradizionale. Il materiale video formatt- widescreen 16:9. dal Menu opzione barre di mascheratura sopra con Premere SELECT/ENTER per confermare la Alcuni elementi richiedono DVD schermo standard letterbox 4:3. Visualizza le uno selezione. 5 Digitale Italiano Rapporto D'aspetto l'elemento selezionato Menu Default Sottotitoli Disco Uscita Audio Portoghese Rapporto D'aspetto Linguaggio 2 Spagnolo Menu Disco . impostazioni. Linguaggio Inglese Audio Sottotitoli Disco Altri Digitale Prima dell'uso (Continua) Suono Altri Uscita Audio Digitale disco DVD ha serie di di uscita audio. Ogni opzioni Impostare "Uscita Audio Digitale" del lettore tipo di sistema audio utilizzato. una E possibile Play. se selezionata passa da On il connettore DIGITAL OUT del lettore Linguaggio DVD e collegato a un decoder Dolby Digital (o a un amplificatore o altro impianto dotato di decoder Dolby Digital). Stream/PCM: Selezionare "Stream/PCM" se connettore DIGITAL OUT del lettore DVD e amplificatore Dolby Digital o MPEG. un o a un PCM: Selezionare digitale stereo se collegati quando con un o a un Menu Disco Auto On Play Off Regione Linguaggio collegato decoder Menu a DTS, Uscita Audio Digitale amplificatore sistema riproduce un disco di registrazione Dolby DOLBY DIGITAL Audio PCM Restrizione Regione Control Con il formato DVD si puo la resa (DRC) ascoltare la traccia sonora di piu accurata e realistica alla possibile, grazie tecnologia audio digitale. Tuttavia, e possibile comprimere il range dinamico della potenza audio (la differenza tra i suoni piu forti e quelli piu deboli). In tal modo e possibile ascoltare un film a basso volume senza perdere la limpidezza del suono. A tal fine impostare DRC su On. /PCM Menu Disco Sample Freq. Rapporto D'aspetto Dynamic Range un Stream/PCM Linguaggio On DRC Vocal Rapporto D'aspetto il si Sottotitoli Disco Codice Di Audio Restrizione MPEG2. Linguaggio e Off. a Sottotitoli Disco Codice Di 2 canali. L'uscita audio del lettore DVD a registrato Digital, MPEG1 impianto con Vocal Altri si e e in formato PCM 2ch video altro impostazioni DRC, Premere 3/4 per selezionare la voce desiderata e premere SELECT/ENTER. L'impostazione della voce in base al DOLBY DIGITAL/PCM: Selezionare "DOLBY DIGITAL/PCM" modificare le Auto 48 KHz Menu programma con 96KHz Uscita Audio Vocal Digitale Impostare Altri Vocal su On solo se si riproduce un DVD karaoke multicanale. I canali karaoke sul disco si mixeranno in un normale Auto DVD suono stereo. Sample Frequency Per modificare le impostazioni di Frequenza di campionatura, selezionare dapprima Uscita Audio Digitale come indicato sopra. Se il vostro ricevitore amplificatore NON e idoneo per segnali a 96KHz, selezionare 48KHz. Una volta o operata questa selezione, l'unita effettuera la conversione automatica dei segnali da 96KHz in 48KHz in modo che il vostro sistema li possa decodificare. Se il vostro ricevitore o amplificatore e idoneo per segnali a 96KHz, selezionare 96KHz. Una volta operata questa selezione l'unita fara passare qualsiasi elaborazioni. tipo di segnale senza ulteriori Play E possibile impostare il lettore DVD in modo che un DVD inizi automaticamente la riproduzione dopo il suo inserimento. Se la modalita Auto Play e attivata (On), il lettore DVD cerchera il titolo dal tempo di riproduzione piu lungo e lo avviera automaticamente. On: La funzione Auto Off: La funzione Auto Play Play e attivata. non e attivata. Note L'Auto Play potrebbe non funzionare su alcuni DVD. 13 PREAZION Prima dell'uso Controllo Restrizione I film (Continua) parentale Codice Di Regione Inserire il codice Paese/Area i cui standard sono stati utilizzati per classificare i DVD video disc, facendo riferimento all'elenco (vedere "Elenco Codici Paese", pagina 25.). DVD DVD possono contenere scene non adatte per i bambini. Per questo motivo i dischi possono contenere su informazioni sul Controllo parentale che comprendono tutto il disco o alcune scene del disco. Tali scene sono classificate da 1 a 8 e su certi dischi sono disponibili scene alternative Linguaggio Audio Restrizione Codice Di Regione Rapporto D'aspetto Linguaggio Menu Uscita Audio Altri 7 6 Menu Disco Restrizione 5 Codice Di 4 Regione 1 Selezionare "Restrizione" usando i 3/4 del menu impostazioni. il 3 inserire e ancora pulsanti 5 Spostare secondo stata inserita una 3/4 il primo stato fatto un errore prima di premere SELECT/ENTER, premere CLEAR e inserire di password di sicurezza a 4 cifre. usando i tasti nuovo livello di classificazione da 1 carattere utilizzando i cursore usando i carattere usando i Nota La conferma della pulsanti 2 e pulsanti 3/4. 3/4 . Uno (1) rappresenta a la Premere SELECT/ENTER per confermare la classificazione, quindi premere SETUP per uscire dal 14 menu. menu. a 4 cifre 1 Seguire i passaggi 2 Inserire il vecchio codice, 3 Selezionare Cambia utilizzando i premere SELECT/ENTER. 4 Inserire il 5 Inserire lo stesso codice un'altra volta premendo SELECT/ENTER. 6 Premere SETUP per uscire dal 8 e attivo. Il disco verra riprodotto integralmente. Livelli di classificazione da 1 a 8: : alcuni dischi contengono scene non adatte per i bambini. Impostando un livello di classificazione per il lettore verranno riprodotte tutte le scene del disco con livello uguale o minore. Le scene di livello superiore non verranno riprodotte a meno che non sia disponibile una scena alternativa sul disco. La scena alternativa deve presentare un livello uguale o inferiore. Se non vengono trovate scene alternative appropriate, la riproduzione si interrompe. E necessario inserire la password a 4 cifre o modificare il livello allo scopo di riprodurre disco. selezione della confermare la password a 4 cifre necessaria (vedere "Cambiare il codice Modifica del codice restrizione minore della riproduzione. Otto (8) rappresenta la restrizione maggiore di playback. Sblocca: se si seleziona Sblocca, il Controllo parentale non selezionare il si cambia il codice 4 cifre" pi avanti). quando la a a . SETUP per uscire dal Se un premere 2. per 6 selezione del Codice Paese, quindi premere password; una password a 4 cifre usando i tasti numerici per creare una password di sicurezza a 4 cifre, quindi premere SELECT/ENTER. Reinserire la password a 4 cifre e premere SELECT/ENTER per la verifica. Se e gia stata inserita una password; inserire una password a 4 cifre usando i tasti numerici per confermare la password di sicurezza a 4 cifre, poi premere SELECT/ENTER. Selezionare 3/4 pulsanti 3 di "Restrizione" Premere SELECT/ENTER non i Settagio selezionato, passaggio Selezionare il 4 pulsanti Mentre "Restrizione" e selezionato, premere 2. Se 5 Regione impostazioni. Con il Codice Di 3 Seguire sinistra. Modificare 4 menu Sboccato Digitale Altri 2 del 2 2 Menu Uscita Audio Selezionare il Codice Di 1 3 Rapporto D'aspetto 1 Digitale 8 Audio Sottotitoli Disco Linguaggio Settaggio DE Menu Disco adatte. La classificazione Linguaggio Codice Di Sottotitoli Disco dipende dai diversi Paesi. La funzione Controllo parentale permette di impedire che i vostri bambini riproducano i dischi o di far apparire scene alternative su determinati dischi. pi DVD nuovo codice 1 e 2 a sinistra a 4 poi (Classificazione). premere SELECT/ENTER. pulsanti 3/4 quindi cifre, poi premere SELECT/ENTER. e verificarlo menu. Se avete dimenticato il codice a 4 cifre Se avete dimenticato la vostra password, per cancellare la password corrente, seguire la seguente procedura. 1 2 Premere SETUP per visualizzare il menu setup. Utilizzare i tasti numerati per inserire il numero a 6 cifre "210499". La password appare per 3 a un 4 cifre ora attimo sul Inserire un nuovo sinistra (Restrizione). cancellata. La scritta "P CLr" display. codice come mostrato in alto a Funzionamento Riproduzione Setup della un e DVD Caratteristiche Generali DVD riproduzione Accendere la TV collegata di con Note DVD selezionare la fonte di input selezionare la fonte di input collegata Premere OPEN/CLOSE per 2 leggere verso che non sul al lettore DVD. presenti il vassoio Passaggio con menu essere Setup. ad altro TITOLO un DVD il lato da titolo, e possibile passare ad un altro titolo nel seguente modo: Premere DISPLAY, quindi premere il tasto numerato Se il basso. riproduzione inizia automaticamente. Se la riproduzione non ha inizio, premere PLAY. In alcuni casi potrebbe invece apparire il menu del disco. un disco contiene In alcuni casi lo schermo uno menu DVD dotati di schermo di piu corrispondente (0-9) un per selezionare il numero di un titolo. ad Passaggio un altro CAPITOLO 1 /12 DVD Se viene visualizzato un a 1/3 vassoio, Premere OPEN/CLOSE per chiudere il vassoio. La scritta READING appare sullo schermo TV, e la l'inserimento di telecomando, indicato il venga espressamente contrario. Alcune funzioni potrebbero anche e portadisco. Inserire il disco nel 3 aprire Tutte le funzioni descritte richiedono il meno al lettore DVD. Sistema audio: Accendere il sistema audio 1 video menu viene visualizzato dopo menu. DVD Se un titolo contiene piu di un capitolo, e possibile passare ad un altro titolo capitolo nel seguente modo: Premere brevemente SKIP/SCAN . o > durante la riproduzione per selezionare il prossimo capitolo o Utilizzare i tasti 1 234 per selezionare il titolo/capitolo che si desidera guardare, quindi premere SELECT/ENTER tornare all'inizio dell'attuale per iniziare la riproduzione. Premere TITLE o MENU per tornare allo schermo capitolo precedente. capitolo. Premere brevemente .. due volte per tornare al Per passare direttamente ad un capitolo durante la premere DISPLAY. Premere quindi menu. riproduzione DVD, 3/4 per selezionare l'icona del capitolo. Inserire quindi il numero del capitolo tramite i tasti Note -- -- numerati Se e impostato il sistema Parental Control e il disco non corrisponde alle impostazioni di Rating (non autorizzato) e necessario inserire il codice a 4 cifre e/o autorizzare il disco (vedere "Parental Control", a pagina 14). Il DVD potrebbe avere un codice regionale. Il lettore non riproduce dischi con un codice regionale diverso da quello in esso inserito. Il codice regionale di questo lettore e 2 (due). (0-9). Note Per i numeri rapida a due cifre, premere i tasti numerati (0-9) in successione. RICERCA 1 Tenere DVD premuto SKIP/SCAN . due secondi durante la o > per circa riproduzione. Il lettore entra in modalita SEARCH. 2 Tenere premuto SKIP/SCAN . o > ripetuta- mente per selezionare la velocita desiderata: 3 : mX2, mX4, mX16, mX100 (indietro) o MX2, MX4, MX16, MX100 (avanti). Per uscire dalla modalita PICERCA, premere PLAY. 15 FUNZIOAMET Funzionamento Caratteristiche Fermo immagine e DVD con generali (segue) A* riproduzione per fotogrammi DVD Per 1 Premere PAUSE/STEP durante la riproduzione. passera al funzionamento PAUSE. E possibile avanzare per fotogramma premendo ripetutamente PAUSE/STEP sul telecomando. Il lettore 2 Ripetizione Rallentatore o T durante la Il lettore entra in modalita SLOW 2 Utilizzare SLOW t desiderata:t 1/16, ripetere A * " DVD OFF una sequenza in titolo: un punto che si desidera diventi il punto d'inizio. appare brevemente sullo schermo TV. 2 Premere di diventi il nuovo A-B nel punto che si desidera punto finale. "A B" appare brevemente sullo schermo TV, e la sequenza in ripetizione ha inizio ("AsB" appare sulla finestra del display). DVD 1 Premere SLOW t AB 1 Premere A-B nel " A-B riproduzione. T per selezionare la velocita t 1/8, t 1/4 o t 1/2 (indietro), o oT1/16,T1/8,T1/4oT1/2(avanti). 3 Per uscire dalla modalita 3 Per cancellare la sequenza, premere A-B. . rallentatore, premere PLAY. Ricerca Tempo La funzione Ricerca riproduzione in 0:20:09 DVD Tempo permette -:--:-- di iniziare la determinato momento sul disco. un 1 Premere DISPLAY durante la riproduzione. Il display verra visualizzato sullo schermo. Casuale Karaoke DVD Il 1 Premere RANDOM durante la 2 riproduzione o quando la riproduzione viene fermata. L'unita iniziera automaticamente la Riproduzione Casuale e RANDOM appariranno nella finestra del display e nella schermata del menu. Per tornare alla riproduzione normale, premere RANDOM ripetutamente finche RANDOM non scompariranno dalla finestra del display e dalla schermata del menu. Suggerimenti Premendo SKIP/SCAN > durante la casuale Random, l'unita seleziona continua la riproduzione un riproduzione altro titolo e Random. riquadro Ricerca passato sul disco con tempo di riproduzione Il "-:--:--" viene visualizzato nel riquadro Ricerca Tempo. 3 Utilizzare i tasti numerici entro 10 secondi per inserire l'ora d'inizio desiderata. Inserire ore, minuti e secondi da sinistra verso Se si inserisce destra nel riquadro. premere CLEAR per eliminare i numeri inseriti. Quindi inserire i numeri corretti. un numero sbagliato, 4 Premere SELECT/ENTER entro 10 secondi per confermare l'ora d'inizio. La riproduzione non inizia dall'ora selezionata sul disco. Se si inserisce valida, la riproduzione proseguira dal punto 3D Surround Questa funzione e attiva solo mostra il 2 Premere 3/4 entro 10 secondi per selezionare l'icona Ricerca Tempo sul display dello schermo. un'ora Note Tempo corrente. DVD NORM. corrente. 3D SUR dischi DVD Questa unita Karaoke. puo riprodurre l'effetto 3D Surround, che riproduzione audio multicanale da due casse convenzionali, invece delle cinque o piu casse simula la Ripeti CHAPT TITLE ripetere normalmente necessarie per ascoltare audio multiun sistema home theatre. canale da OFF Dischi DVD Video 1 Per stereo DVD l'attuale - Ripeti Capitolo/Titolo/Off capitolo di riproduzione, Sullo schermo TV viene visualizzata l'icona 2 Per ripetere il titolo attualmente in premere REPEAT. Ripeti Capitolo. riproduzione, premere REPEAT un'altra volta. Sullo schermo TV viene visualizzata l'icona 3 Per uscire dalla modalita una Ripeti, Titolo. terza volta. Sullo schermo TV viene visualizzata l'icona 16 Ripeti premere REPEAT Ripeti Off. 1 Premere SOUND per selezionare "3D SUR" durante la riproduzione. 2 Per disattivare l'effetto 3D Surround, premere mente SOUND per selezionare "NORM.". nuova- Funzionamento Caratteristiche Zoom e generali (segue) Caratteristiche Speciali zoom permette di ingrandire l'immagine di muoversi all'interno 1 Premere ZOOM durante la dell'immagine ingrandita. riproduzione per attivare la funzione immagine ripetutamente possibile ingrandimento fino a sei volte. 2 Utilizzare i pulsanti 1 234 nell'immagine ingrandita. o il fermo aumentare il per muoversi Verificare il contenuto dei dischi DVD Video: Menu Alcuni DVD hanno menu 1 Premere TITLE. schermo. Altrimenti Nota zoom potrebbe funzionare non con alcuni 2 Il menu opzioni DVD. elencare pu menu, il menu verr visualizzato sullo un potrebbe dei sottotitoli DVD segnalibro essere Menu Disco titolo, premere nuovamente un punto DVD d'inserzione memorizzato. Si possono memorizzare fino a nove punti d'inserzione. Per inserire un segnalibro, 1 Premere MENU. procedere 2 Per eliminare il menu del come segue. riproduzione del disco, premere quando la riproduzione raggiunge Viene visualizzato il MARKER il Sullo schermo TV verr visualizzata brevemente l'icona del di Se il disco contiene Ripetere il passaggio segnalibri per disco. 1 per inserire fino a nove riproduzione contrassegnata Il numero di 2 Premere 1/2 entro 10 secondi per selezionare il segnalibro che si desidera richiamare. 3 premere SELECT/ENTER. La riproduzione inizier dalla scena contrassegnata. 4 Per eliminare il menu MARKER SEARCH, premere SEARCH. Per cancellare una scena ripetutamente durante la l'angolo desiderato. corrente viene visualizzato sul 1 ENG Lingua riproduzione D DVD 5.1 CH una ripetutamente durante la riproduzione per lingua audio o una traccia audio diversa. Sottotitoli DVD ABC 1 ENG ripetutamente durante la lingue dei sottotitoli. per vedere le varie del disco, premere SEARCH. 2 Premere 1/2 per selezionare il che si desidera cancellare. 3 Premere CLEAR. di Audio Premere AUDIO ascoltare menu MARKER Nota Se viene visualizzato numeri di display. contrassegnata SEARCH. i angoli di ripresa angoli durante per selezionare angolo Cambio di riproduzione Sullo schermo viene visualizzato il Ripetere con passare tra i diversi Premere SUBTITLE Durante la 1/1 riproduzione SEARCH. numero la filmate scene possibile riproduzione. Premere ANGLE del disco, premere SEARCH. Sullo schermo viene visualizzato il menu MARKER di disco, premere nuovamente DVD ripresa differenti, 1 Durante la 5 Angolo segnalibro. una scena del disco. punto che si desidera memorizzare. Per richiamare menu MENU. 1 Durante la Il del disco. TITLE. E possibile iniziare la riproduzione da 4 menu MARKER SEARCH 1/9 numero visualizzato il angoli di ripresa, lingua parlata, e capitoli per il titolo. 3 Per eliminare il menu Ricerca a DVD Se il titolo corrente ha La funzione che permettono di accedere speciali. Per utilizzare i menu, premere MENU, e per selezionare un'opzione premere il tasto del numero ad essa corrispondente. In alternativa, utilizzare i tasti 1 234 per indicare la selezione, quindi premere SELECT/ENTER. Menu Titolo 3 Premere CLEAR per tornare alla riproduzione normale o tornare sul fotogramma fermato. 1 DVD funzioni zoom. Premendo ZOOM livello di 2 DVD DVD La funzione video DVD con numero di segnalibro disponibile questa funzione non sul disco. segnalibro verr cancellato dall'elenco. passaggi 2 segnalibro. Per eliminare il menu e 3 per cancellare MARKER gli ulteriori SEARCH, premere SEARCH. 17 FUNZIOAMET Funzionamento CD audio con e dischi MP3/WMA Riproduzione di un CD audio e disc MP3/WMA CD MP3 Note sulle MP3 WMA Un file MP3 contiene dati audio Questo lettore DVD riproduce registrazioni in formato MP3/WMA su dischi CD-ROM, CD-R o CD-RW. Prima di riprodurre registrazioni MP3/WMA, leggere sulle Registrazioni MP3/WMA a destra. nota Inserire 1 CD un audio; il TV. Passare Disc MP3/WMA Registrazioni disco estensione ".mp3" vengono chiamati "file pu leggere un file MP3 con un'estensione diversa da ".mp3". con la CD audio appare sullo schermo all'operazione MP3/WMA; il secondo Il lettore MP3". non richiudere il vassoio e menu compressi lo schema di codificazione file audio MPEG1. I file WMA 3. Un file WMA di selezione MP3/WMAJPEG appare sullo Schermo TV. Passare all'operazione 2. menu un file di dati audio compressi con Microsoft. tecnologia Il formato WMA (Windows Media Audio) offre una compressione doppia rispetto al formato MP3. MP3 WMA JPEG (Windows Media Audio) La compatibilita dei MP3/WMA questo con lettore e limitata nel seguente modo: Premere 3/4 per selezionare MP3/WMA, quindi premere SELECT/ENTER. Il menu MP3/WMA appare sullo Schermo TV. 2 Premere RETURN per passare al selezione MP3/WMA-JPEG. menu di - 4.Se si che Folder1 Folder2 Folder4 Folder5 Folder6 Cancella Tutto Folder8 5. OFF 00:00 selezionare per 3 premere SELECT/ENTER. l'elenco dei file in una una cartella, quindi traccia, quindi Programma pagina seguente. pagina precedente. Programma MP3 WMA TRACK01 TRACK02 TRACK 1.mp3 TRACK03 TRACK 2.mp3 TRACK04 TRACK 3.mp3 TRACK05 TRACK 4.mp3 TRACK06 Cancella Tutto TRACK 8.mp3 NORM. 00:00 Menu CD audio Non 8. Il 1 OFF in un elenco di file e si desidera tornare all'elen- Cartelle, utilizzare 3/4 per selezionare ,quindi premere SELECT/ENTER per tornare allo schermo menu precedente. Per la interrompere riproduzione 5 momento, premere STOP. 18 o disco. o ".mp3" o ".wma": ad esempio "********.WMA". caratteri speciali come totale di file sul disco "/ non : * ? " " < > etc. deve superare i 650. I dischi e le registrazioni per questo lettore DVD devono conformi ad alcuni standard tecnici per ottenere qualit ottimale di riproduzione. I DVD preregistrati essere preimpostati tipi diversi di secondo questi standard. Esistono formati di disco registrabile (tra cui WMA), che hanno bisogno di condizioni preesistenti (vedere sopra) per garantire che la riproduzione sia compatibile. CD-R contenenti file MP3 Vi Se si file system ISO9660. o Menu MP3/WMA Suggerimenti co crea un sessione un nuovo usare numero molti TRACK 7.mp3 Cancella Tutto 7. una TRACK 6.mp3 TRACK07 STER. software SYSTEM, ad esempio I nomi dei file devono contenere al massimo 8 let- 6. sono TRACK 5.mp3 0: 56: 18 "ISO 9660" con un singola richiede un file MP3/WMA nella prima traccia. Se non presente un file MP3/WMA nella prima traccia, il file MP3/WMA non pu essere riprodotto. Per riprodurre il file a "********.MP3" di riproduzione della traccia appare sulla finestra del display e sul menu. La riproduzione termina alla fine del disco. TRACK08 FILE tere e l'estensione riproduzione ha inizio. Durante la riproduzione, il tempo Premere TITLE per passare alla Premere MENU per tornare alla Un disco utilizzare La CD essere file MP3/WMAfile MP3/WMA, formattare tutti i dati nel disco cartella. Premere 3/4 per selezionare una premere PLAY o SELECT/ENTER. 4 un non crea un Creator", che Folder7 Appare registra "Direct-CD" etc., impossibile riprodurre un file MP3/WMA. Suggeriamo di utilizzare "Easy-CD Folder3 Premere 3/4 Il formato fisico del CD-R deve 3. Programma MP3 WMA Frequenza di Sampling / solo a 44.1kHz(MP3), 22.05-44.11kHz(WMA) 2.Bit rate / entro 32 320kbps(MP3), 32-128kbps(WMA) 1. in qualsiasi preghiamo inoltre di notare che e necessaria un'autorizzazione per scaricare file e musica MP3/WMA da Internet. La nostra societa non ha il potere di conferire questa autorizzazione. Richiedere sempre l'autorizzazione del del copyright. proprietario Funzionamento CD Pausa MP3 Audio con WMA Ripeti 1 Premere PAUSE/STEP durante la 2 Per tornare alla PLAY MP3/WMA CD e riproduzione. Per ripetere L'icona Passare CD un'altra traccia a MP3 o > durante o Premere SKIP/SCAN . due volte brevemente per andare alla traccia precedente. Per andare direttamente (0-9) durante la sequenza. riproduzione, premere A-B sul punto di Repeat e "A a una traccia con i CD * " appare sullo schermo 2 Premere nuovamente A-B nel WMA la riproduzione per selezionare la traccia successiva per tornare all'inizio della traccia corrente. numero una Sulla schermata del Premere brevemente SKIP/SCAN . inserire il CD inizio scelto. PAUSE/STEP. o A-B 1 Durante la premere nuovamente riproduzione, (Continua) audio, di traccia utilizzando i tasti numerici "A B" e menu la sequenza viene viene visualizzata l'icona menu Ripeti e riprodotta ripetutamente. 3 Per uscire dalla sequenza e tornare alla normale, premere nuovamente A-B. Sulla schermata del menu. punto finale prescelto. riproduzione viene visualizzata l'icona Ripeti e "OFF". 3D Surround CD Questa unita riproduzione. puo riprodurre l'effetto 3D Surround, che riproduzione audio multicanale da due casse convenzionali, invece delle cinque o piu casse simula la Ripeti Traccia/Tutto/Off 1 Per ripetere mere REPEAT. L'icona ripetere REPEAT L'icona MP3 la traccia attualmente in sullo schermo 2 Per CD Repeat funzione, pre- "TRACCIA" appare e menu. tutte le tracce di una WMA disco, premere un seconda volta. Repeat e "ALL" appare sullo schermo menu. Repeat, premere REPEAT 3 Per cancellare la modalita una stereo normalmente necessarie per ascoltare audio multicanale da un sistema home theatre. 1 Premere SOUND per selezionare "3D SUR" durante la riproduzione. 2 Per disattivare l'effetto 3D Surround, premere nuovamente SOUND per selezionare "NORM". terza volta. L'icona Repeat e "OFF" appare sullo schermo CD Ricerca MP3 menu. WMA Cambio di Canale Audio CD Premere AUDIO ripetutamente durante la riproduzione per ascoltare un diverso canale audio (STER., LEFT sinistra, o RIGHT destra). - - 1 Tenere premuto SKIP/SCAN . due secondi durante la Il lettore 2 Tenere o > per circa riproduzione. in funzionamento SEARCH. passera premuto SKIP/SCAN . o > ripetutamente per selezionare la velocita desiderata: mX2, mX4, mX8 (indietro) o MX2, MX4, MX8 (avanti). La velocita schermo e la direzione della ricerca 3 Per uscire dalla modalita Casuale indicate sullo CD MP3 SEARCH, premere PLAY. WMA 1 Premere RANDOM durante la la sono menu. riproduzione o quando viene fermata. riproduzione L'unita iniziera automaticamente la Casuale e finestra del RANDOM display e o "RAND." Riproduzione appariranno nella nella schermata del menu. 2 Per tornare alla riproduzione normale, premere ripetutamente finche RANDOM o "RAND." scompariranno dalla finestra del display e dalla RANDOM non schermata del menu. 19 FUNZIOAMET Funzionamento Visualizzazione di Disco JPG con un disco JPG JPEG Questo lettore DVD riproduce dischi con File JPEG CD Kodak. Prima di riprodurre registrazioni JPEG, leggere la nota a destra sulle Registrazioni JPEG. Inserire il disco 1 Il menu e Per Appare e richiudere il vassoio. selezione MP3/WMA-JPEG appare sullo interrompere la riproduzione 5 momento, premere il menu Passaggio ad dente o qualsiasi JPEG. un altro File Premere SKIP/SCAN . visualizzazione di in STOP. o > un'immagine una volta durante la per andare al file prece- seguente. Schermo TV. Fermo immagine 1 Premere PAUSE/STEP durante la sequenza di MP3 WMA fotogrammi. JPEG Il lettore entra in modalit PAUSE. 2 Premere 3/4 per selezionare JPEG premere SELECT/ENTER. Il menu quindi 2 Per tornare alla sequenza di fotogrammi, premere PLAY o premere di nuovo PAUSE/STEP. JPEG appare sullo Schermo TV. Immagine speculare JPEG Folder1 Premere 3/4 durante la visualizzazione di un'immagine per ruotarla in senso orizzontale o verticale. Folder2 Folder3 Folder4 Folder5 Folder6 Folder7 Folder8 Slide Immagine Off Speed ruotata Premere 1/2 durante la visualizzazione di 3 Premere 3/4 per selezionare premere SELECT/ENTER. una cartella, quindi l'elenco dei file nella cartella. Premere RETURN per passare al menu selezione MP3/WMA-JPEG. Appare Suggerimenti Per tornare dall'elenco file alla cartella, utilizzare i tasti " sul telecomando per selezionare e premere SELECT/ENTER per tornare al precedente schermo menu. 34 4 Per visualizzare un " file in 3/4 per selezionarlo o PLAY. e particolare, premere premere SELECT/ENTER Note sulle un file, premere RETURN per passare al menu precedente (menu JPEG). Premere TITLE per passare alla pagina seguente. Premere MENU per passare alla pagina precedente. Folder1 display, i file pixel Il numero a non apparire alcun totale di file e cartelle sul disco non e deve superare i 650. potrebbero essere incompatibili a causa registrazione o della condizione dei diversi formati di del disco. Se viene utilizzato software "Easy CD Creator" come per masterizzare il file JPEG nel CD-R, al momento di copiare sul layout del CD accertarsi che tutti I file presentino file l'estensione ".jpe" o ".jpg". ".jpeg" , rinominarli ".jpg". I nomi di file senza estensione ".jpg" non possono letti da questo lettore DVD, anche se sono visibili come file immagine JPEG in Windows Picture4.jpg Picture5.jpg essere Picture6.jpg Picture7.jpg Slide Speed Off 5/32 1024X768 Picture5.jpg Suggerimenti fotogrammi ha tre velocit : Fast (veloce), Normal (normale), Slow (lenta), e Off (disattivata). Premere 1/2 per selezionare la Slide Speed (velocit di fotogrammi) quindi premere 3/4 per selezionare l'opzione desiderata e premere La visualizzazione di SELECT/ENTER. 20 delle dimensioni del file di dimensioni troppo grandi: ridurre la risoluzione del File JPEG a meno di 2 mega registrare un altro disco. minuti continua come Picture3.jpg 1024X768 numero e sono Picture2.jpg 5/32 Registrazioni JPEG Se i file hanno estensioni Picture1.jpg un'immagine orario/antiorario. JPEG, il lettore DVD potrebbe avere bisogno di tempo per leggere i contenuti del disco. Se dopo vari selezionati JPEG senso A seconda del Alcuni dischi Il file viene visualizzato. Durante la visualizzazione di per ruotarla in Explorer. Riproduzione programmata Riproduzione programmata audio e MP3 CD con WMA Ripetizione Tracce Programmata Disc MP3/WMA Per La funzione memoria CD di inserire nella Programma permette del lettore le tracce preferite di L'icona qualsiasi Per disco. Il Premere PROGRAM durante la riproduzione o in E L'indicatore apparira a destra della parola Program sul menu. Repeat REPEAT modalita pausa per entrare in Modalita modifica L'icona Repeat E programmi; "TRACK" appare sullo schermo e una una e menu. programmi, seconda volta. "ALL" appare sullo schermo menu. ripetizione, premere terza volta. e "OFF" appare sullo schermo menu. traccia dall'Elenco programma riproduzione (solo MP3/WMA) o in modalita programmi. dischi in pausa per entrare Appare sparisce. dall'elenco una traccia, quindi premere SELECT/ENTER per inserire la traccia selezionata nell'Elenco programmi. E TRACK 12 TRACK 2 TRACK 8 TRACK 1.mp3 TRACK 3 TRACK 10 TRACK 2.mp3 TRACK 4 TRACK 3 TRACK 3.mp3 E TRACK 8.mp3 TRACK 2.mp3 TRACK 4.mp3 TRACK 3.mp3 TRACK 4.mp3 TRACK 5.mp3 TRACK 6 TRACK 7.mp3 Cancella Tutto TRACK 8 STER. Cancella Tutto TRACK 8.mp3 NORM. 00:00 Menu CD audio Eseguire 3 le completa programmi. dell'Elenco programma operazioni 1-2 di "Cancellazione di una programmi" come descritto sopra. Traccia dall'Elenco 2 Usare 3/4 per selezionare "Cancella SELECT/ENTER. Il I TRACK 6.mp3 TRACK 7 programmi. Cancellazione 1 Programma MP3 WMA TRACK 1 TRACK 5 . La traccia sara cancellata dall'elenco programmi. Programma CD E 4 Premere CLEAR. il passo 2 per inserire altre tracce sull'Elenco l'indicatore 2 Premere 2 per passare all'elenco programmi. 3 Use 3/4 per selezionare la traccia da cancellare Selezionare 3 Ripetere 4 pre- in Modalita modifica Premere PROGRAM per uscire dalla Modalita modifica 0: 56: 18 e 1 Premere PROGRAM durante la CD audio 2 una Cancellare Note l'indicatore riprodotta, tutte le tracce sull'elenco Per cancellare la modalita di programmi. lato destro dello schermo Repeat ripetere L'icona 1 la traccia attualmente REPEAT. premere REPEAT contenere 30 tracce. Programma puo ripetere mere Tutto", e premere Programma completo del disco sara cancellato. programmi vengono cancellati anche quando il disco viene estratto dal lettore. OFF Menu MP3/WMA Premere 2. L'ultima traccia sull'elenco programmata selezionata viene indicata programmi. Premere 3/4 per selezionare la traccia da 5 riprodurre. Premere TITLE per passare alla Premere MENU per tornare alla 6 pagina seguente. pagina precedente. Premere PLAY per iniziare. La riproduzione delle tracce inizia nell'ordine programmato "PROG." appare sullo schermo menu. La riproduzione termina quando tutte le tracce sull'Elenco e programmi 7 sono state Per tornare alla riprodotte una riproduzione volta. normale dalla selezionare riproduzione programmata, (o MP3/WMA) traccia dal CD e quindi una premere SELECT/ENTER. L'indicatore "PROG." scompare dallo schermo menu. 21 FUNZIOAMET Informazioni Ultime DVD aggiuntive Impostazioni in Memoria CD Questo lettore memorizza le l'ultimo disco visto. Le memoria anche impostazioni dell'utente impostazioni rimangono in il disco viene rimosso dal lettore se per o il lettore e spento. Se viene inserito un disco con impostazioni memorizzate, il programma passa maticamente a visualizzare l'ultimo stop. auto- Note -- Le impostazioni essere -- Questo lettore se sono utilizzate in non archiviate in memoria per qualsiasi momento. memorizza le si spegne il lettore prima impostazioni di un disco sua riproduzione. di iniziare la Salvaschermo Lasciando il lettore DVD in modalita stop per cinque minuti circa, viene visualizzata l'immagine del salvaschermo. Dopo il funzionamento del salvaschermo per cinque minuti circa, il lettore DVD si spegne automaticamente. Sistema Selezionare E necessario selezionare la modalita di sistema approper il sistema TV. Se il messaggio NO DISC priata appare nella finestra del display, tenere premuto PAUSE sul pannello frontale per piu di 5 secondi per selezionare un sistema (PAL, NTSC, o AUTO). ? Se il sistema selezionato della vostra essere AUTO: il sistema quando il lettore DVD e collegato quando il lettore DVD e collegato il lettore DVD e collegato TV NTSC. Selezionare con una 22 con TV Multisistema. Selezionare con una PAL: coincide distorti. Selezionare con una NTSC: non TV, i colori dell'immagine potrebbero quando TV PAL. Risoluzione dei Controllare nella seguente problemi la guida possibile di causa un problema prima di contattare il servizio clienti. Cause Sintomo Il Manca corrente. Soluzione di alimentazione cavo collegato. non Collegare correttamente il cavo di ali- mentazione alla presa. L'interruttore acceso, il lettore DVD non Non stato inserito alcun disco. Inserire un disco. (Verificare che la spia DVD o CD audio della finestra del dis- ma play funziona. Nessuna Il televisore impostato per la ricezione di segnali di uscita DVD immagine. Il non video cavo collegato non Nessun Il televisore corretta- collegato spento. impostato per la ricezione di segnali output DVD. suono. non Collegare cavo audio e non correttamente il cavo video. Accendere il televisore. Selezionare la modalit tore audio in modo da suono Il accesa.) Selezionare la modalit input video sul televisore in modo che l'immagine del lettore DVD appaia sullo schermo TV. mente L'interruttore del televisore sia collegato input del ricevi- poter ascoltare il dal lettore DVD Collegare correttamente il cavo audio. correttamente. L'interruttore dell'impianto collegato con il cavo audio spento L'Uscita Audio nella Digitale Accendere l'impianto cavo audio. posizione sbagliata. La riproduzione catti- Il disco inizia Non collegato con il Posizionare l'Uscita Audio Digitale nella posizione corretta, quindi accendere nuovamente il lettore DVD premendo POWER. Pulire il disco. sporco. va Il lettore DVD la non Inserire stato inserito alcun disco. DVD riproduzione. sia E stato inserito un disco non ripro- Il disco stato inserito non Il disco E stato nella guida. non fun- impostato ziona correttamente. Il telecomando sore un livello di classifi- Disattivare la funzione Livello o biare il livello di classificazione. non puntato sul Puntare il telecomando sul lettore DVD. sen- del lettore DVD. Il telecomando troppo lontano dal let- tore DVD. Ci sono ostacoli tra il telecomando lettore DVD. Le pile Posizionare il disco nel cassetto in modo corretto all'interno della guida. Pulire il disco. sporco. cazione. Il telecomando accesa.) Posizionare il disco con il lato della riproduzione in basso. capovolto. posizionato un disco. (Verificare che la spia CD audio del display del DVD Inserire un disco riproducibile.(Verificare il tipo di disco, sistema di colore e Codice area.) ducibile. Il disco o del telecomando sono e il scariche. Usare il telecomando massima di 7 m. Eliminare gli Sostituire le cam- sensore a una del distanza ostacoli. pile. 23 RIFEMNT Elenco Codici Inserire il Disco" numero Lingue di codice corrispondente per le impostazioni iniziali "Audio Disco", "Sottotitolo Disco" e/o "Menu (vedere pagina 12). Codice Lingua Codice Lingua Codice Lingua Codice Lingua 6565 Afar 7079 Faroese 7678 Lingala 8375 Slovacco 6566 Abkhaziano 7082 Francese 7679 Laotiano 8376 Sloveno 6570 Afrikaans 7089 Frisiano 7684 Lituano 8377 Samoano 6577 Ameharico 7165 Irlandese 7686 Lettone 8378 Shona 6582 Arabo 7168 Gaelico 7771 Malagasy 8379 Somalo 6583 Assamese 7176 Galiziano 7773 Maori 8381 Albanese 6588 Aymara 7178 Guarani 7775 Macedone 8382 Serbo 6590 Azerbaigiano 7185 Gujarati 7776 Malayalam 8385 Sudanese 6665 Bashkir 7265 Hausa 7778 Mongolo 8386 Svedese 6669 Bielorusso 7273 Hindi 7779 Moldavo 8387 Swahili 6671 Bulgaro 7282 Croato 7782 Marathi 8465 Tamil 6672 Bihari 7285 Ungherese 7783 Malese 8469 Telugu 6678 Bengalese Bangla 7289 Armeno 7784 Maltese 8471 Tagiko 6679 Tibetano 7365 Interlingua 7789 Burmese 8472 Thai 6682 Bretone 7378 Indonesiano 7865 Nauru 8473 Tigrinya 6765 Catalano 7383 Islandese 7869 Nepalese 8475 Turkmeno 6779 Corso 7384 Italiano 7876 Olandese 8476 Tagalog 6783 Ceco 7387 Ebraico 7879 Norvegese 8479 Tonga 6789 Gallese 7465 Giapponese 7982 Oriya 8482 Turco 6865 Danese 7473 Yiddish 8065 Panjabi 8484 Tartaro 6869 Tedesco 7487 Javanese 8076 Polacco 8487 Twi 6890 Bhutani 7565 Georgiano 8083 Pashto, Pushto 8575 Ucraino 6976 Greco 7575 Kazako 8084 Portoghese 8582 Urdu 6978 Inglese 7576 Groenlandese 8185 Quechua 8590 Uzbeco 6979 Esperanto 7577 Cambogese 8277 Reto-Romanzo 8673 Vietnamita 6983 Spagnolo 7578 Kannada 8279 Rumeno 8679 Volap k 6984 Estone 7579 Coreano 8285 Russo 8779 Wolof 6985 Basco 7583 Kashmiro 8365 Sanscrito 8872 Xhosa 7065 Persiano 7585 Curdo 8368 Sindhi 8979 Yoruba 7073 Finlandese 7589 Kirghizo 8372 Serbo-Croato 9072 Cinese 7074 Fiji 7665 Latino 8373 Singalese 9085 Zulu 24 scozzese Elenco Codice Paese Inserire il numero di codice corrispondente per le iniziali "Codice Paese" impostazioni (vedere pagina 14). Codice Paese Codice Paese Codice Paese AD Andorra ER Eritrea LC Saint Lucia SB Isole Solomon AE Emirati Arabi Uniti ES Spagna LI Liechtenstein SC Seychelles AF Afghanistan Antigua e Barbuda ET Etiopia LK Sri Lanka SD Sudan AG FI Finlandia LR Liberia SE Svezia AI Anguilla FJ Fiji LS Lesotho SG Singapore AL Albania FK Isole Falkland LT Lituania SH Saint Helena AM Armenia FM Micronesia LU Lussemburgo SI Slovenia AN Antille Olandesi FO Isole Faroe LV Lettonia SJ AO Angola FR Francia LY Libia AQ Antartico FX Marocco SK Repubblica Slovacca Argentina Francia (territorio europeo) MA AR MC Monaco SL Sierra Leone AS Samoa Americana GA Gabon MD Moldavia SM San Marino AT Austria GB Gran MG Madagascar SN Senegal AU Australia GD Grenada MH Isole Marshall SO Somalia AW Aruba GE MK Macedonia SR Suriname AZ Azerbaigian GF Georgia Guyana Francese ML Mali ST Saint Tome BA Bosnia-Erzegovina GH Ghana MM SU Ex USSR BB Barbados GI Gibilterra MN Myanmar Mongolia SV El Salvador BD Bangladesh GL Groenlandia MO Macao SY Siria BE Belgio GM Gambia MP Isole Marianne del Nord SZ Swaziland BF Burkina Faso GN Guinea MQ Martinica TC Isole Turks BG Bulgaria GP Sig Mauritania TD Ciad BH Bahrain GQ Guadalupa (Francese) Guinea Equatoriale MS Montserrat TF BI Burundi GR Grecia MT Malta BJ Benin GS Isole S. MU Mauritius TG Togo BM Bermuda GT Guatemala MV Maldive TH Tailandia BN Brunei Darussalam GU Guam MW Malawi TJ Tagikistan BO Bolivia GW Guinea Bissau MX Messico TK Tokelau BR Brasile GY MY Malesia TM Turkmenistan BS Bahamas HK Guyana Hong Kong MZ Mozambico TN Tunisia BT Bhutan HM Heard and McDonald Islands NA Namibia TO Tonga BV Isole Bouvet HN Honduras NC Nuova Caledonia TP Timor Est BW Botswana HR Croazia (Francese) TR Turchia BY Bielorussia HT Haiti NE Niger TT Trinidad and BZ Belize HU Ungheria NF Isole Norfolk TV Tuvalu CA Canada ID Indonesia NG Taiwan Isole Cocos IE Irlanda NI Nigeria Nicaragua TW CC TZ Tanzania CF Repubblica Centro Africana IL Israele NL Paesi Bassi UA Ucraina CG Congo IN India NO UG CH Svizzera IO Oceano Indiano Britannico NP Norvegia Nepal Uganda Regno Unito CI Costa d'Avorio territorio NR Nauru UM CK Isole Cook IQ Iraq NU Niue CL Cile IR Iran NZ Nuova Zelanda US Stati Uniti CM Camerun IS Islanda OM Oman UY Uruguay CN Cina IT Italia PA Panama UZ Uzbekistan CO Colombia JM Giamaica PE Peru VA Citt del Vaticano CR Costa Rica JO Giordania PF Polinesia Saint Vincent & Grenadine Ex Cecoslovacchia JP PG VE Venezuela CU Cuba KE PH VG Isole CV Capo Verde KG Giappone Kenya Kirghizistan (Francese) Papua Nuova Guinea Filippine VC CS PK Pakistan VI Isole CX Isole Christmas KH Cambogia PL Polonia VN Vietnam CY Cipro KI Kiribati PM Saint Pierre and VU Vanuatu CZ Repubblica Ceca KM Comoros PN Isole Pitcairn WF Isole Wallis and Futuna DE Germania KN Saint Kitts & Nevis PR Porto Rico WS Samoa DJ Gibuti Anguilla PT Portogallo YE Yemen DK Danimarca KP Nord Corea PW Palau YT DM Dominica KR Corea del Sud PY Paraguay YU Mayotte Yugoslavia DO Repubblica Dominicana Algeria KW Kuwait QA Qatar ZA Sud Africa DZ KY Isole RE Reunion ZM Zambia EC Ecuador KZ Kazakistan RO Romania ZR Zaire EE Estonia LA Laos RU Federazione Russa ZW Zimbabwe EG Egitto LB Libano RW Ruanda EH Sahara Occidentale SA Sud Arabia (Keeling) Bretagna Georgia e S.Sandwich (USA) Cayman Codice Paese Isole Svalbard Jan (Francese) e Mayen e Principe e Caicos Francese Te rritori UK Tobago Isole Minori USA Miquelon (Francese) Vergini (Britanniche) Vergini (USA) 25 RIFEMNT Specifiche Generalita elettrici Requisiti AC 110-240V Consumo Dimensioni Peso , 50/60 Hz 14W 430 X 60 X 242 (circa) (circa) mm (w/h/d) 2,4 kg d'esercizio Temperatura da 5°C Umidita d'esercizio 35°C a (da 41°F a 95°F) da5%a90% Sistema Laser Semiconduttore Sistema di Risposta 650 mm PAL/NTSC segnale in laser, lunghezze d'onda frequenza DVD(PCM96kHz):da8Hza44kHz DVD(PCM48kHz):da8Hza22kHz CD:da8Hza20kHz Rapporto segnale-rumore Oltre 100dB Distorsione armonica inferiore Range dinamico a (solo connettori ANALOG OUT) 0,008% oltre 100 dB oltre 95 dB (DVD) (CD) Outputs VIDEO OUT 1,0 Vp-p 75 Ω, sync negativo, RCA jack Uscita audio Output audio x 1/SCART(TO TV) (audio digital) 0,5V(p-p),75Ω,RCAjackx1 (audio analogico) 2,0 Vrms (1 kHz, 0 dB), 600 Ω, RCA jack (L, R) x 1/SCART(TO TV) Accessori Cavovideo.......................1 Cavoaudio.......................1 Telecomando.....................1 Pile.............................2 Modelli e specifiche tecniche possono subire modifiche senza preavviso. Prodotto sotto la licenza di D confidenziali i diritti riservati. "DTS" 26 e non "DTS Dolby Laboratories. "Dolby" e il simbolo doppio pubblicati. Copyright 1992-1997 Dolby Laboratories. Tutti Digital Out" sono marchi registrati di Digital Theater Systems, sono Inc. marchi registrati di Dolby Laboratories. Lavori ERTIFICATO DI GARANZIA (compilare all'atto dell'acquisto) Modello:DVD-630............................................N.serie:........................ N.scontrinofiscale(daallegare):............................................................... CognomeeNome:......................................................................... Indirizzo:................................................................................. C.a.p.,Citta:.............................................................................. ONDIZIONI DI GARANZIA L'apparecchio e coperto da garanzia per il primo utente sulla base delle norme di legge vigenti. I componenti che risultassero difettosi per accertate cause di fabbricazione verranno sostituiti gratuitamente presso i ns centri di assistenza autorizzati, duratnte il periodo di garanzia. La MELCHIONI SpA concessionaria IRRADIO in Europa, si riserva il diritto, in alcuni casi, di decidere la sostituzione di questo apparecchio dimostratosi difettoso con un altro uguale (o simile). Questa garanzia sara considerata valida anche negli altri stati membri dell'Unione Europea per tutte le riparazioni eseguite presso i centri di assistenza o rivenditori autorizzati IRRADIO. Questo prodotto non verra mai considerato difettoso per materiali o fabbricazione qualora dovesse essere adattato, cambiato o regolato per conformarsi a norme di sicurezza o tecniche nazionali o locali in vigore in un paese diverso da quello per il quale era stato originariamente progettato e fabbricato. Interventi a domicilio per controlli di comodo o presunti difetti sono esclusi dalla garanzia. La garanzia non comprende gli impianti di antenna e di rete e decade se l'apparecchio presenta manomissioni, errate installazioni, danneggiamenti provocati da cadute o trasporto, da negligenza o comunque da cause non imputabili a difetti di fabbricazione o non dipendenti dalla volonta della Concessionaria compresi ma non limitati a fulmini, acqua, fuoco, disordini pubblici, aerazione inadeguata, errata alimentazione o polarita invertite. La garanzia non copre l'uso professionale del prodotto. La presente garanzia non comporta alcun risarcimento a danni diretti o indiretti di qualsiasi natura verso persone o cose dovute al periodo di eventuale inefficienza dell' apparecchio. Eventuali estensioni, promesse o assicurate dal rivenditore saranno a carico di quest'ultimo. Per quanto non contemplato nel presente certificato valgono le ns Condizioni Generali di Vendita. Il presente certificato deve sempre accompagnare l'apparecchio in caso di riparazione ed e valido solo se unito a scontrino fiscale o fattura d'acquisto. Per eventuali informazioni sui Centri di Assistenza autorizzati sul territorio italiano numero oppure consultate il ns contattare il seguente sito: www.melchioni.it Timbro I potete verde: prodotti Irradio Melchioni sono S.p.A., e firma del rivenditore distribuiti da: via P. Colletta 37, 20135 Milano Per convalida certificato di garanzia Melchioni S.p.A. - Sede: 20135 Milano - Via P. e-mail: [email protected] Colletta, 37 DV7411EM_LGEIS_ENG DVD PLAYER OWNER'S MANUAL MODEL : DVD-630 Before connecting, operating please read this instruction booklet www.melchioni.it or adjusting this product, carefully and completely. Safety Precautions CAUTION NOTES ON COPYRIGHTS: RISK OF ELECTRIC SHOCK DO NOT OPEN It is forbidden CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER by law to copy, broadcast, show, broadcast play in public, or rent copyrighted material without permission. This product features the copy protection function developed by Macrovision. Copy protection signals are recorded on some discs. When recording and playing the pictures of these discs on a VCR, picture noise will appear. This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited. via cable, (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric This shock to persons. SERIAL NUMBER: The serial number is found The exclamation point is intended to alert the within user an equilateral triangle to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product. WARNING: TO REDUCE THE RISK OF FIRE OR ELEC- TRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. WARNING: Do not install this such as a book case or equipment in a confined space similar unit. CAUTION: This To Digital Video Disc Player employs manual of this a Laser System. read this owner's proper product, please carefully and retain for future reference should the ensure use require maintenance, contact (see service procedure). Use of controls, an unit authorized service location adjustments, or the performance of procespecified herein may result in haz- dures other than those ardous radiation exposure. To prevent direct exposure to laser beam, do not try to open the enclosure. Visible laser radiation when open. DO NOT STARE INTO BEAM. CAUTION: The apparatus should not be exposed to water (dripping or splashing) and no objects filled with liquids, such as vases, should be This placed product on the apparatus. comply with requirements of EEC is manufactured to the radio interference DIRECTIVE 89/336/EEC, 93/68/EEC and 73/23/EEC. 2 on the back of this unit. This number is unique to this unit and not available others. You should record requested information here and retain this guide as a permanent record of your purchase. Model No. Serial No. ___________________________________ ___________________________________ to Table of Contents Introduction SafetyPrecautions.........................2 TableofContents..........................3 BeforeUse..............................4-5 Operation with Audio CD and MP3/WMA Disc Playing an Audio CD and MP3/WMA Disc NotesonMP3/WMARecordings. . . . . . . . . . . . . . . . . . 18 18 .18 Pause.............................19 Precautions.............................5 MovingtoanotherTrack................19 RepeatTrack/All/Off..................19 NotesonDiscs..........................5 Search.............................19 PlayableDiscs...........................4 AboutSymbols..........................5 .6 FrontPanelandDisplayWindow. . . . . . . . . . . . . RemoteControl............................7 RearPanel................................8 Preparation Connections............................9-10 ConnectingtoaTV.......................9 .10 ConnectingtoOptionalEquipment. BeforeOperation.......................11-14 GeneralExplanation......................11 On-ScreenDisplay.......................11 InitialSettings........................12-14 12 Initial Settings General Operation Language..........................12 . . . . . . . . . . . . . . . . . . Picture.............................12 Sound.............................13 Random...........................19 RepeatA-B.........................19 3DSurround........................19 .19 ChangingtheAudioChannel. OperationwithJPEGDisc...................20 ViewingaJPEGdisc.....................20 MovingtoanotherFile.................20 . . . . . . . . . . StillPicture.........................20 Toflipthepicture.....................20 Torotatepicture......................20 .20 NotesonJPEGRecordings. ProgrammedPlayback.....................21 Programmed Playback with Audio CD and . . . . . . . . . . . MP3/WMADisc.........................21 RepeatProgrammedTracks. ErasingaTrackfromProgramList. ErasingtheCompleteProgramList. . . . . . . . . . . . . . . . . . . . . . . .21 .21 .21 AdditionalInformation......................22 Others.............................13 LastConditionMemory...................22 ParentalControl......................14 ScreenSaver...........................22 SystemSelect..........................22 Operation OperationwithDVD.....................15-17 PlayingaDVD..........................15 GeneralFeatures........................15 MovingtoanotherTITLE...............15 .15 MovingtoanotherCHAPTER. . . . . . . . . . Reference Troubleshooting..........................23 LanguageCodeList.......................24 CountryCodeList.........................25 Specifications............................26 Search.............................15 Still Picture and Frame-by-Frame Playback . 16 SlowMotion.........................16 About the Random...........................16 Repeat............................16 RepeatA-B.........................16 symbols Indicates hazards itself or for instructions likely to cause damage. harm to the unit other material TimeSearch........................16 3DSurround........................16 Zoom..............................17 MarkerSearch.......................17 Indicates special operating Indicates tips and hints for features of this unit. making the task easier. SpecialDVDFeatures....................17 TitleMenu..........................17 DiscMenu..........................17 CameraAngle.......................17 .17 ChangingtheAudioLanguage. . . . . . . . . . Subtitle............................17 3 INTRODUC Before Use Playable Disc-related terms Discs Title (DVD only) DVD The main film content (8cm/12cmdisc) or Audio CD you to locate it (8cm/12cmdisc) In addition, this unit can play a DVD-R, DVD±RW, Kodak PICTURE CD and CD-R audio titles, MP3, WMA or CD-RW that contains JPEG files. or Notes -- Depending ment some or -- the conditions of the recording equip(or DVD-R/±RW) disc itself, (or DVD-R/±RW) discs cannot be the CD-R/RW CD-R/RW played -- on on the unit. Do not attach any seal or label to either side labeled side or the recorded side) of a disc. Do not CDs or malfunctions. use irregularly shaped octagonal). It may result in Notes on (the (e.g., heart-shaped DVDs Some playback operations of DVDs may be intentionally fixed by software manufacturers. As this unit plays DVDs according to disc content designed by the software manufacturer, some playback features of the unit may not be available or other functions may be added. supplied with the DVDs. Refer also to the instructions Some DVDs made for business purposes may not be played on the unit. code of the DVD player and DVDs player is designed and manufactured 2 for playback of region "2" encoded DVD software. The region code on the labels of some DVD discs indicates which type of player can play those discs. This unit can play only DVD discs labeled "2" or "ALL". If you try to play any other discs, the message "Check Regional Regional This DVD Code" will appear on the TV screen. Some DVD discs may not have a region code label even though their playback is 4 prohibited by area limits. or accompanying feature content additional feature content, or music album. Each title is assigned a title reference number enabling easily. Chapter (DVD only) Sections of a picture or a musical piece that are smaller than titles. A title is composed of one or several chapters. Each chapter is assigned a chapter number, enabling you to locate the chapter you want. Depending on the disc, chapters may not be recorded. Track (Audio CD Sections of a assigned track a only) piece an audio CD. number, enabling you to musical track you want. Each track is locate the Before Use (Continued) Storing Precautions After the unit Handling When shipping the unit original shipping carton and packing materials come in handy. For maximum protection, re-pack the unit as it was originally packed at the factory. The When setting up the unit The picture and sound of a nearby TV, VCR, or radio during playback. In this case, position may be distorted the unit away from the TV, VCR, unit after removing the disc. To keep Do not near or radio, or turn off the volatile liquids, contact with the unit for a leave marks such as on Cleaning discs Fingerprints and dust on the disc can cause poor picquality and sound distortion. Before playing, clean the disc with a clean cloth. Wipe the disc from the centure ter out. long period plastic products in of time. They will the surface. soft, dry cloth. If the surfaces soft cloth lightly solution. Do not benzine, light, as there may be a considerable temperature increase inside the car. insecticide spray, or To clean the cabinet a store the disc in its case. the unit Cleaning Use playing, Do not expose the disc to direct sunlight or sources of heat, or leave it in a parked car exposed to direct sun- the exterior surfaces clean use the unit. Do not leave rubber use a discs or are moistened with a extremely dirty, detergent mild strong solvents such as alcohol, thinner, as these might damage the surface Do not use strong solvents such as alcohol, benzine, thinner, commercially available cleaners, or anti-static spray intended for older records. vinyl use About Symbols of the unit. About the To obtain clear picture The DVD player is a high-tech, precision device. If the optical pick-up lens and disc drive parts are dirty or worn, the picture quality will be poor. Regular inspection and maintenance are recommended after every 1,000 hours of use. (This depends on the operating environment.) For details, please contact your nearest dealer. a " may appear on the TV This icon means the function manual is not available About the disc on Discs DVD CD Handling discs Do not touch the Hold the disc get on by playback side of the disc. edges so that fingerprints the will not on during operation. explained in this owner's that specific DVD video disc. symbols A section whose title has applicable only Notes symbol display " screen for instructions of the following symbol is represented by the symbol. one to the disc DVD Audio CDs. MP3 MP3 disc. WMA WMA disc. JPEG JPEG disc. the surface. Do not stick paper or tape on the disc. 5 INTRODUC Front Panel and Display Window POWER Forward Switches the ON and OFF. Press and hold for two seconds for fast forward search. a Skip/Scan ( Q / S ) chapter/track or to PREVIOUS chapter/track. Reverse Power indicator Go to Lights green when the DVD player is turned Skip/Scan ( T / R ) chapter/track. Go to NEXT player beginning of current Press and hold for two seconds for on. a fast reverse search. STOP(9) Stops playback. Pause PAUSE(;) playback temporarily/press repeatedly for frame-by-frame playback. PLAY(2) playback. Starts Disc Insert a Tray disc here. Display window Shows the current status of the OPEN/CLOSE player. Opens or ( / ) closes the disc tray. Remote Sensor ANGLE active TITLE Indicates current title number CHP/TRK DVD Indicates current chapter or track number DVD inserted Indicates total CD Audio CD inserted MP3 MP3 or playing time/elapsed inserted PROG. Programmed playback RANDOM Indicates current time WMA disc player active RANDOM playback active function: Playback, Pause, etc. Indicates repeat mode MP3 6 CD DVD TITLE CHP/TRK PROG. RANDOM ALL AB Remote Control OPEN/CLOSE POWER Switches DVD Player ON and OFF. SOUND/MUTE - This button is not available. Selects 3D SURROUND during playback. disc TV POWER Turns off TV sound. - Selects OPEN/CLOSE SOUND/MUTE - control to DVD. DISPLAY RETURN - 1 2 - - SELECT display. VOL MENU (left/right/up/down) 4 3 Selects an item in the TV AV ENTER Acknowledges Selects channel of TV and SKIP/SCAN PLAY SKIP/SCAN ; ) ? playback temporarily/ press repeatedly for frame-by-frame playback. ? AUDIO SUBTITLE ANGLE SETUP SLOW(, /.)? playback. REPEAT audio A-B RANDOM ZOOM * Selects subtitle a DVD camera angle or removes setup Marks any ? ? if Displays ? the all. sequence. tracks in random order. ZOOM video image. menu. Point the remote control at the remote (7 m) on RANDOM Enlarges ? Operation Range press the buttons. Distance: About 23 ft track number A-B Plays ? Remote control Remote Control or REPEAT Repeat ? point during playback. MARKER SEARCH a Repeat chapter, track, title, ? SEARCH Press and hold button for about Removes menu. MARKER track. program list or a mark on the MARKER SEARCH menu. ? ? Accesses or CLEAR available SETUP ) Enters to the program edit mode exits from that. ? language. ANGLE Selects S PROGRAM language (DVD) or (CD). a ( two seconds. a menu. SUBTITLE Reverse SKIP/SCAN previous chapter audio channel an PLAY(H) playback. Search backward*/ go to beginning of current chapter or track or go to 0-9 number buttons an ) chapter MARKER SEARCH STOP(9)? Stops playback. Selects T Starts Reverse/ Forward slow AUDIO ( CLEAR ? Pauses Selects numbered items in Forward SKIP/SCAN Search forward*/ go to next or track. PROGRAM DVD disc. ( the discs Title menu, if Displays ? PAUSE/STEP selection. available. volume of TV. menu on a menu TITLE STOP MENU Accesses of TV. TITLE PR./CH SLOW menu. input channel SELECT/ENTER VOL menu. PAUSE/STEP changes Removes the setup Selects AUX A/V PR./CH DISPLAY Accesses On-Screen mode of RETURN/TV AV mode of remote operational operational remote control to TV. DVD Selects and closes the disc tray. Opens sensor battery Detach the and AAA AAA installation battery cover on (size AAA) batteries aligned correctly. from the front of the the rear of the remote control, and insert two R03 with and remote sensor. Angle: About 30 in each direction of the front of the remote sensor. Caution Do not mix old and new batteries. Never mix different types of batteries (standard, alkaline, etc.). 7 INTRODUC Rear Panel COAXIAL Connect to (Digital audio out jack) digital (coaxial) audio equipment. AC Power Cord Plug AUDIO OUT Connect to (Left/Right) amplifier, receiver, an or stereo into the power source. system. VIDEO OUT Connect to a TV with video inputs. TO TV (SCART) Connect to Do not touch the inner Electrostatic panel. damage 8 to the unit. pins of the jacks on the rear discharge may cause permanent a Jack TV with SCART jack. Connections Tips Depending Rear of TV your TV and other equipment you wish to connect, there are various ways you could connect the player. Use only one of the connections on SCART INPUT VIDEO INPUT AUDIO INPUT R L described below. PREATION Please refer to the manuals of your TV, VCR, Stereo or other devices as necessary to make the System best connections. For better sound AUDIO OUT reproduction, connect jacks to the audio in jacks the player's of your audio/video equipment. amplifier, receiver, stereo or See "Connecting to Optional Equipment" on AV T page 10. Caution -- Make the DVD directly to the input channel. Do not connect the DVD Player's AUDIO OUT jack to the phono in jack (record deck) of your audio system. Do not connect your DVD Player via your VCR. The DVD image could be distorted by the copy protection sure Player is connected TV. Tune the TV to the correct video -- -- system. to a TV Connecting Make the one of the capabilities following connections, depending existing equipment. on Rear of DVD player of your Video connection 1 2 Connect the VIDEO OUT the video in jack on jack on the DVD Player to using the video cable (V). the TV Connect the Left and Right AUDIO OUT jacks of Player to the audio left/right in jacks on the (A) using the audio cables. the DVD TV SCART connection Connect the TO TV scart corresponding (T). in jacks on jack on the TV the DVD using Player to the the scart cable 9 Connections Connecting (Continued) Optional Equipment to Rear of DVD player Connecting to an amplifier equipped with two analog stereo or Dolby Pro Logic ll/ Pro Logic channel Connect the Left and DVD Player to the amplifier, receiver, cables (A). Right AUDIO OUT jacks on the right in jacks on your stereo system, using the audio audio left and or Connecting to an amplifier equipped with two digital stereo (PCM) or to an Audio/ Video receiver equipped with a multi-channel decoder (Dolby DigitalTM, MPEG 2, or DTS) X channel 1 one of the DVD Player's DIGITAL AUDIO jacks (COAXIAL X) to the corresponding in jack on your amplifier. Use an optional digital (coaxial X) audio cable. Connect OUT You will need to activate the 2 (See "Digital Digital Audio Output" player's digital output. page 13). on Multi-channel sound A digital multi-channel sound quality. For this connection provides the best you need a multi-channel Audio/Video receiver that supports one or more of the supported by your DVD Player (MPEG 2, Dolby Digital and DTS). Check the receiver manual and the logos on the front of the receiver. audio formats Caution: Due to the DTS will be in DTS Licensing agreement, the digital output digital out when DTS audio stream is selected. Notes -- If the audio format of the digital output does not match capabilities of your receiver, the receiver will produce a strong, distorted sound or no sound at all. Six Channel Digital Surround Sound via digital connection can only be obtained if your receiver is equipped with a Digital Multi-channel decoder. the -- A --To see screen 10 the audio format of the current DVD in the display, press AUDIO. on- COAXIAL DIGITAL INPUT R L AUDIO INPUT Amplifier (Receiver) Before Operation Caution: the remote control, press the DVD button to select the device to be operated. Before using General or TV gives DVD Some DVDs operating the Player. require specific operation or allow only limited operation during playback. When this occurs, the symbol appears on the TV screen, indicating that the operation is not permitted by the DVD Player or is not available on the disc. On-Screen General screen. playback 1 2 basic instructions for (e.g., displayed on the TV changed on the menu. title can setting of an TITLE CHAPT AB OFF item. be also be used for number). For some press SELECT/ENTER to execute the setting functions, setting. Feedback Field Icons Repeat PREATION Title Repeat Chapter Repeat A-B Repeat Off Resume Action Display play from this prohibited or point not available status can be Some items On-screen numbers the change The number buttons Temporary Explanation This manual Press 1/2 to 3 can be display operation Press DISPLAY during playback. Press 3/4 to select an The selected item will be Notes Some discs may not provide all of the features on the display example shown below. If no button is pressed for 10 seconds, the on-screen display disappears. on-screen item. highlighted. DVD Items Function (Press 3/4 to select desired item) Title Number 1/3 Chapter Number 1 /12 Time search 0:20:09 Audio language and Digital Audio Output Sound D mode Subtitle language Angle 1 ENG 5.1 CH ABC Selection Method titles, and skips Shows the current title number and total number of to the desired title number. 1/2,or Numbers, SELECT/ENTER Shows the current chapter number and total number of chapters, and skips to the desired chapter number. 1/2,or Numbers, SELECT/ENTER Shows the elapsed playing time, and searches the point by the elapsed time directly. Numbers, SELECT/ENTER Shows the current audio soundtrack language, encoding method, and channel number, and changes the setting. 1/2,or AUDIO OFF Shows the current subtitles language, and changes the setting. 1/1 Shows the current angle number and total number of angles, and changes the angle number. 1/2,or Shows the current sound mode, and changes the setting. 1/2,or NORM. 1/2,or SUBTILE ANGLE SOUND 11 Before Initial You Operation (Continued) Menu Settings Select set your own Personal Preferences on the can player. Initial General Settings you Language a see Operation Press SETUP. 1 The setup appears. English Disc Subtitle Spanish Disc Menu French Rating German TV Original Disc Subtitle English Disc Menu French Rating German Country Chinese Polish Digital Audio Output Other-------- Picture TV Aspect will show the current selected item, DVD 4:3 Letterbox: Select when Press 3/4 to select the desired item. screen as well setting for the alternate setting(s). as While the desired item is 3 4 Some require SETUP, RETURN, 5 setup 3/4 to select the desired selected, press 2, then setting. Press SELECT/ENTER to confirm your selection. items additional steps. Press or PLAY to exit the menu. Displays Disc above and below the 4:3 Panscan: Select when Scan style picture are is DVD played off). Original : set for the disc is selected. To select another code, press CLEAR. Disc Audio Original Disc Subtitle English Disc Menu French Rating German Country TV Code Spanish Italian Aspect Menu Language Chinese Polish Digital Audio Output Hungarian Other-------- Others 12 a sides of the 16:9 wide TV is connected. 4:3 Letterbox Disc Subtitle 4:3 Panscan Disc Menu 16:9 Wide Others The style (Both Disc Audio Digital original language language, press number buttons to enter the corresponding 4-digit number according to the language code list on page 24. If you enter the wrong language Other : con- bars conventional TV set is back in that 16:9 Wide: Select when for the disc's Menu, Audio, and Subtitle. masking cut Code Aspect Menu Language language a a with connected. The video material formatted in the Pan & TV Language standard 4:3 TV is images picture. Rating Language a theatrical Country Select Output Others nected. The Audio Hungarian Others 2 Portuguese Language Italian Language Digital menu Spanish Code Aspect Menu This is the Italian Code Aspect Menu Disc Audio menu. Disc Audio Country menu TV for the setup language when you press SETUP. Audio Output Before Operation (Continued) Sound Others Audio Digital Output Each DVD disc has The of audio variety output options. player's Digital Audio Output according to the Set the a type of audio system you DRC, Vocal and Auto Play settings can be changed. Press 3/4 to select the desired item and press setting of the selected item is SELECT/ENTER. The use. changed between On and Off. DOLBY DIGITAL/PCM: Select "DOLBY DIGITAL/PCM" if you connected the DVD Player's DIGITAL OUT jack to a Dolby Digital decoder (or an amplifier or other equipment with a Dolby Digital decoder). Disc Audio DRC Disc Subtitle Vocal Disc Menu Auto Country with equipment decoder or a DTS TV Dynamic Range and the Disc Menu PCM at Code Menu Audio digital audio technology. However, quietest ones). Then, you may listen to a movie losing clarity of sound. Set lower volume without a DRC to On for this effect. 48 KHz Language Digital Sample Freq. thanks to possible, Stream/PCM Rating (DRC) can you may wish to compress the dynamic range of the audio output (the difference between the loudest sounds DOLBY DIGITAL /PCM Control hear a program's soundformat, you track in the most accurate and realistic presentation Disc Subtitle Aspect Output With the DVD Disc Audio TV Audio Others The DVD Country Language Digital decoder, Dolby Digital a 2-channel digital player outputs sounds in the PCM 2ch format when you play a DVD video disc recorded on the Dolby Digital, MPEG1, or MPEG2 recording system. amplifier. Off Code Aspect Menu MPEG decoder. PCM: Select when connected to stereo On Play Rating Stream/PCM: Select "Stream/PCM" if you connected the DVD Player's DIGITAL OUT jack to an amplifier or other On 96KHz Output Vocal Set Vocal to On is Others playing. only when a multi-channel karaoke DVD The karaoke channels on the disc will mix into normal stereo sound. Sample Frequency change the Sample Frequency setting, first select the desired Digital Audio Output as indicated as above. If your receiver or amplifier is NOT capable of handling 96KHz signals, select 48KHz. When this choice is made, this unit will automatically convert any 96KHz sig- Auto To nals to 48KHz your system can decode them. If your receiver or amplifier is capable of handling 96KHz signals, select 96KHz. When this choice is so You Play can cally set up the DVD starts If Auto Play search a play DVD playing mode is set to title that back the title On: Auto Off: Auto Player Play Play so a DVD disc automati- whenever the DVD is inserted. On, this DVD player will playback time automatically. is long most and then function is activated. function is not activated. made, this unit will pass each type of signal through without any further processing. Note The Auto Play function may not work for some DVDs. 13 PREATION Before Operation (Continued) Parental Control Rating DVD Enter the code of DVD Movies on DVDs may contain scenes not suitable for children. Therefore, discs may contain Parental Control information that applies to the complete disc or to certain Code Country the disc. These scenes on scenes are 8 Disc Subtitle 7 Disc Menu 6 are Rating Country TV Country TV Code Menu 1 Audio Output Select Output Others using 1 2 "Rating" on the Setup menu using the 3/4 buttons. While "Rating" 3 of "Rating" the cursor using 2 using second character is selected, press 2. on Code is selected, press 2. Country 2 step 3 Select 4 Shift 5 6 selection, the first character Select the 3/4 buttons menu. Follow Unlock Change Code Country the setup While 2 1 Digital Audio Others 3 Language Language Digital 4 Aspect Code Aspect Menu 5 Rating DE Disc Menu you to prevent discs from being played by your children or to have certain discs played with alternative scenes. Disc Audio were Code Set Disc Subtitle The Parental Control feature allows country-dependent. whose standards country/area Disc Audio rated from 1 to 8, and alternatively, more suitable scenes available for selection on some discs. Ratings are a used to rate the DVD video disc, referring to the list (See "Country Code List", page 25.). on left. using the 3/4 buttons. button and select the 3/4 buttons. Press SELECT/ENTER to confirm your country then press SETUP to exit the code 3 When you have not entered a password yet. Enter a 4-digit password using the numbered buttons to create a menu. personal 4-digit security password. then press SELECT/ENTER. Enter the 4-digit password again and press SELECT/ENTER to verify. When you have already entered a password; Enter a 4-digit password using the numbered buttons to confirm the personal 4-digit security pass- word, then press SELECT/ENTER. If you make a mistake before pressing SELECT/ENTER, press CLEAR and enter 4-digit security password again. Note Confirmation of the the code is 4 rating from 1 to 8 using the 3/4 buttons. One (1) has the least playback restrictions. Eight (8) has the most playback restrictions. Changing Ratings 1 to 8: Some discs contain scenes not suitable for children. If you set a rating for the player, all disc scenes with the same rating or lower will be played. Higher unless an rated alternative scenes scene is available The alternative must have the lower one. If no will not be same on rating played 14 code 1 Follow Enter the old code, then press SELECT/ENTER. Select Change using 3/4 buttons then press Steps 1-2 as shown above to the left Enter the new 4-digit code, then press SELECT/ENTER. 5 Enter exactly the same code a second fy by pressing SELECT/ENTER. 6 Press SETUP to exit the If you forget your 4-digit code If you your password, to clear the current pass- 1 Press SETUP to 2 Use the Number buttons to enter the display the setup menu. 6-digit number "210499". The 4-digit password is cleared. display for a moment. rating to exit the menu. forget time and veri- menu. word, follow the procedure below. play- (Rating). SELECT/ENTER. 4 the disc. suitable alternative is found, 5 selection, then press SETUP 4-digit or a back will stop. You must enter the 4-digit password or change the rating level in order to play the disc. Press SELECT/ENTER to confirm your the 2 a Unlock: If you select Unlock, Parental Control is not active. The disc will play in full. is necessary when the 4-digit code" below.). 3 Select 4-digit password changed (see "Changing 3 Enter a new code as "P CLr" appears shown above to the left on the (Rating). Operation Playing with DVD General Features DVD a Playback Setup Turn on Note DVD the TV and select the video nected to the DVD input source con- player. available Audio system: Turn on the audio system and select the input source connected to the DVD player. 1 Load When chosen disc in the tray, with the automatically. If playback press PLAY. In some cases, the disc menu playback does not start, might The menu screen DVD which offer is may be appear first after loading a DVD title/chapter you view, then press SELECT/ENTER to start play- back. Press TITLE or MENU to return to the DVD menu screen. as more than one title, you to can move follows: Press DISPLAY, then press the appropriate (0-9) to select a title number. num- to another CHAPTER 1 /12 a title can move a menu. Use the 1 234 buttons to select the want to disc has DVD displayed displayed menu. bered button When a menu screen a Moving instead. If Setup to another TITLE another title Press OPEN/CLOSE to close the tray. READING appears on the TV screen, and the use 1/3 side down. starts on Moving Press OPEN/CLOSE to open the disc tray. your 2 playback 3 Unless stated otherwise, all operations described the remote control. Some features may also be on a disc has to another more chapter as than one chapter, you follows: Press SKIP/SCAN . or > briefly during playback to select the next chapter or to return to the beginning of the current chapter. Press . twice briefly to step back to the previous chapter. To go directly to any chapter during DVD playback, press DISPLAY. Then, press 3/4 to select the icon. Then, enter the chapter number using chapter the numbered buttons (0-9). Notes -- If Parental Control is set and the disc is not within the Rating settings (not authorized), the 4-digit code must be entered and/or the disc must be authorized -- "Parental Control", DVDs may have a (see page 14). region code. Your player will not play discs that have a region code different from your player. The region code for this player is 2 (two). Note For two-digit numbers, press (0-9)in rapid succession. the numbered buttons on Search DVD 1 Press and hold SKIP/SCAN . two seconds The player will or > for about during playback. now go into SEARCH mode. 2 Press and hold SKIP/SCAN . or > repeatedly required speed: mX2, mX4, mX16, (backward) or MX2, MX4, MX16, (forward). to select the mX100 MX100 3 To exit SEARCH mode, press PLAY. 15 OPERATION with DVD Operation General Features Still Picture and (continued) Repeat Frame-by-frame playback DVD The during playback. will now go into PAUSE mode. advance the picture frame-by-frame pressing PAUSE/STEP repeatedly on by the remote con- The player or T or T to select the required speed: t 1/16, t 1/8, t 1/4 or t 1/2 (backward), T 1/16, T 1/8, T 1/4 or T 1/2 (forward). 3 To exit slow motion mode, press PLAY. Random or briefly appears on starting point. the TV screen. 3 To cancel the sequence, press A-B. 1 Press DISPLAY play 0:20:09 DVD -:--:-- appears on during playback. the The playing on-screen dis- screen. elapsed playing time of the 2 Within 10 seconds, press 3/4 to select the Time Search icon in the on-screen display. The "-:--:--" appears in the Time Search box. during playback or in stop mode. The unit automatically begins Random Playback and "RANDOM" appears on the display window. > during the unit selects another title and Random resumes 3 Within 10 seconds, the required use the number buttons to enter start time. Enter onds from left to right hours, minutes, and sec- in the box. If you enter the wrong numbers, press CLEAR to remove the numbers you entered. Then enter the correct numbers. playback, press RANDOM until disappears on the display window. 2 To return to normal 4 Within 10 seconds, press SELECT/ENTER to confirm the start time. playback, Random Playback an starts from the selected time on the disc. If you enter playback will continue from the current point. invalid time, playback. 3D Surround Note This unit This function Repeat only TITLE CHAPT OFF - Repeat Chapter/Title/Off Repeat Chapter icon appears on the TV screen. repeat the title currently playing, press REPEAT second time. The Repeat Title icon appears 3 To exit The 16 Repeat on the TV screen. mode, press REPEAT Repeat Off icon appears on the TV a third time. screen. a 3D SUR 3D Surround effect, which playback from two conventional stereo five more speakers, instead of the speakers normally required to listen to multi- a or home theater system. during playback. 2 To turn off the 3D Surround effect, press SOUND again to select "NORM". REPEAT. 2 To produce NORM. 1 Press SOUND to select "3D SUR" repeat the currently playing chapter, press The can DVD simulates multi-channel audio channel audio from DVD Video Discs 1 To works with DVD Karaoke discs. DVD at current disc. 1 Press RANDOM Tips By pressing SKIP/SCAN title: The Time Search box shows the Karaoke DVD "RANDOM" a OFF The Time Search function allows you to start any chosen time on the disc. during playback. will enter SLOW mode. 2 Use the SLOW t " * A Time Search DVD 1 Press SLOW t sequence in AB again at your chosen end point. "A B" appears briefly on the TV screen, and the repeat sequence begins ("AsB" appears the display window). trol. Slow Motion A* 2 Press A-B player can a DVD 1 Press A-B at your chosen " 1 Press PAUSE/STEP 2 You To repeat A-B a Operation with DVD General Features Zoom (continued) 1 Press ZOOM during playback still or playback If you press ZOOM repeatedly, the increases up to six steps. 2 Use the 1 234 buttons to discs: Menus to acti- magnification level resume DVDs may offer menus that allow you to access special features. To use the disc menu, press MENU. Then, press the appropriate number button to select an option. use the 1 234 buttons to highlight your selection, then press SELECT/ENTER. Or, move the zoomed through picture. 3 Press CLEAR to the contents of DVD Video Checking vate the Zoom function. normal playback or return to paused image. Title Menu DVD 1 Press TITLE. If the current title has screen. Note The zoom function may not work for some 2 The DVDs. Marker Search DVD Repeat step 2 To briefly. screen 1 to enter up to nine Marker points on a disc. To Recall 1 a Marked Scene disc During playback, The MARKER SEARCH will appear the Playback remove 1 a Marker During playback, 2 If the disc contains Changing scene. DVD scenes again. 1/1 recorded at different angle appears the Audio on Language Subtitles repeatedly during playback language or audio track. DVD ABC camera the a display. DVD D 5.1 CH to hear a dif- 1 ENG Press SUBTITLE repeatedly different subtitle languages. during playback to see the press SEARCH. menu will appear on the screen. Press 1/2 to select the Marker number that you want to erase. 3 Angle Press AUDIO Marked Scene disc displayed. the disc menu, press MENU remove ferent audio the MARKER SEARCH menu, press The MARKER SEARCH is 1 ENG a SEARCH. To clear menu screen. 3 Press SELECT/ENTER. 4 To again. DVD The number of the current on 2 Within 10 seconds, press 1/2 to select number that you want to recall. will start from the Marked and angles, you can change to a different camera angle during playback. Press ANGLE repeatedly during playback to select desired angle. press SEARCH. menu options, 1 Press MENU. Camera the TV may appear. angles, spoken language chapters for the title. camera the title menu, press TITLE remove The disc playback, press MARKER when reaches the spot that you want to on list menu to memorize. 2 menu can Disc Menu point. Up disc The Marker icon will appear menu, the menu will appear on the MARKER SEARCH 1/9 You can start playback from a memorized nine points can be memorized. To enter a mark, follow these steps. During playback a Otherwise, the disc and subtitle 3 To 1 DVD DVD The Zoom function allows you to enlarge the video image and to move through the enlarged image. the DVD Features Special Note If appears, the feature is not available on the disc. Press CLEAR. The Marker number will be erased from the list. 4 Repeat steps 2 and 3 to erase additional Marker numbers. 5 To remove the MARKER SEARCH menu, press SEARCH. 17 OPERATION Operation with Audio CD and MP3/WMA Disc Playing an Audio CD and MP3 CD The DVD MP3/WMA Disc Notes MP3/WMA Insert play Recordings files that have The player can not read an MP3 file that has a file extension other than ".mp3". a About An WMA file is JPEG Press 3/4 to select the MP3/WMA then press SELECT/ENTER. The MP3/WMA menu appears on the TV screen. move 1. 2. to the MP3/WMA-JPEG 4. Program Folder1 Folder2 Folder3 Folder4 Folder5 Folder6 Folder7 Clear All Folder8 5. OFF 00:00 as Microsoft audio Media 3 4 Press 3/4 to select SELECT/ENTER. compatibility track then press PLAY or Press TITLE to Press MENU to is CD Creator", which creates an ISO9660 file system. single session disc requires MP3/WMA files in the no MP3/WMA file in the 1st track, it cannot playback MP3/WMA files. If you wish to playback MP3/WMA files, format all the data in 6. File or use a new one. names should be named incorporate ".mp3" e.g. "********.MP3" the current track's elapsed playing time will appear on the display window and menu. Playback will stop at the end of the disc. player A and must Playback starts. During playback, with this follows: Sampling Frequency / only at 44.1 kHz (MP3), (WMA) Bit rate / within 32-320 kbps (MP3), 32-128 kbps (WMA) CD-R physical format should be "ISO 9660" If you record MP3/WMA files using the software which cannot create a FILE SYSTEM, for example "Direct-CD" etc., it is impossible to playback MP3/WMA files. We recommend that you use "Easy- the disc a offers double the audio the MP3 format. first track. If there is Press 3/4 to select a folder, and SELECT/ENTER. A list of files in the folder appears. Audio) compression 22.05-44.1 kHz 3. MP3 WMA a MP3/WMA Disc limited Press RETURN to choice menu. WMA(Window Media Audio) technology. WMA(Windows compression of MP3 WMA 2 compressed by using the layer-3 file-coding scheme. We call the ".mp3" file extension "MP3 files". MPEG1 audio right. on disc and close the tray. Audio CD; Audio CD menu appears on the TV screen go to step 3. MP3/WMA disc; The MP3/WMA-JPEG choice menu appears on the TV screen. Go to step 2 1 Recordings An MP3 file is audio data MP3/WMA formatted recordings on CD-ROM, CD-R or CD-RW discs. Before playing MP3/WMA recordings, read the notes on can MP3/WMA About MP3 WMA Player on or using or 8 letters or less ".wma" extension "********.WMA". 7. Donotusespecialletterssuchas"/:*?"<>"etc. 8. Total number of files on the disc should be less than 650. to the next page. move move to the previous page. This DVD player requires discs/recordings to meet certain technical standards in order to achieve Program CD Program MP3 WMA TRACK01 TRACK02 TRACK 1.mp3 TRACK03 TRACK 2.mp3 TRACK04 TRACK 3.mp3 TRACK 6.mp3 TRACK07 TRACK 7.mp3 Clear All TRACK08 STER. NORM. Audio CD menu 0: 56: 18 Clear All TRACK 8.mp3 00:00 1 If you MP3/WMA menu in a file list and want to return to the Folder list, 34 to and press SELECT/ENTER to are the return to the To 5 18 highlight previous menu stop playback screen. at any other optimal automatically types (including CD-R containing MP3 or WMA files). That require certain pre-existing conditions (see above) to insure compatible playback. OFF Tip use are of recordable disc formats TRACK 5.mp3 TRACK06 Pre-recorded DVDs set to these standards. There are many different TRACK 4.mp3 TRACK05 playback quality. time, press STOP. Customers should also note that required permission is in order to download MP3/WMA files and music from the Internet. Our company has no grant such permission. Permission should to always be sought from the copyright owner. right Operation with Audio and MP3/WMA Disc CD Pause MP3 1 Press PAUSE/STEP WMA Repeat during playback. 2 To return to playback, PAUSE/STEP again. press PLAY To or 1 press repeat CD to another Track Press SKIP/SCAN . or > Press SKIP/SCAN . twice In previous case WMA briefly during step back to briefly of audio CD, to The directly to any track, enter the numbered buttons (0-9) to go using icon and "A Repeat again Repeat press A-B at your chosen start* " appears during playback. Repeat Track/All/Off 1 To MP3 at your chosen end point. on the menu screen, begins to play repeatedly. Repeat icon and "OFF" appears 3D Surround This unit more icon and "TRACK" appears Repeat on the a 3D Surround menu repeat all tracks disc, press REPEAT on a The 3 To cancel The icon and "ALL" appears Repeat Repeat mode, Repeat Search on MP3 on multi-channel audio from a home theater 2 To turn off the 3D Surround a again two seconds during playback. The now will five or system. during playback. effect, press SOUND to select "NORM.". the a third time. menu screen. Changing the Audio Channel Press AUDIO repeatedly during playback to hear a (STER., LEFT, or RIGHT). CD different audio channel WMA 1 Press and hold SKIP/SCAN . player from two menu screen. press REPEAT icon and "OFF" appears CD the effect, which playback 1 Press SOUND to select "3D SUR" second time. press menu screen. speakers, instead of the speakers normally required to listen to screen. 2 To the play, CD produce can on conventional stereo WMA repeat the track currently playing, press REPEAT. The menu screen. icon and "A B" appears simulates multi-channel audio CD the on 3 To exit the sequence and return to normal A-B again. track. the track number CD sequence. and the sequence to return to the or a 2 Press A-B The playback to go to the next track beginning of the current track. the MP3 A-B During disc playback, ing point. The Moving (Continued) > for about or go into SEARCH mode. 2 Press and hold SKIP/SCAN . or > repeatedly required speed: mX2, mX4, mX8 (backward) or MX2, MX4, MX8 (forward). to select the Search speed and direction are indicated on the menu screen. 3 To exit SEARCH mode, press PLAY. CD Random 1 Press RANDOM MP3 WMA during playback or when playback is stopped. The unit and Random automatically begins RANDOM or "RAND." appears on the Playback and display window menu screen. 2 To return to normal repeatedly the display playback, until RANDOM window and or press RANDOM "RAND." disappears on menu screen. 19 OPERATION Operation Viewing with JPEG Disc JPEG disc a Moving JPEG Player can play discs with JPEG files and Kodak picture CD. Before playing JPEG recordings, read the notes on JPEG Recordings on right. This DVD 1 Insert menu appears > once during viewing a previous file. Still Picture 1 Press PAUSE/STEP on or to advance to the next file or to the picture disc and close the tray. a The MP3/WMA-JPEG choice TV to another File Press SKIP/SCAN . the screen. slide show. during go into PAUSE mode. 2 To return to the slide show, press PLAY or press PAUSE/STEP again. The player will now MP3 WMA To JPEG 2 the flip picture Press 3/4 during showing a picture picture horizontally or a vertically. Press 3/4 to select the JPEG then press to flip the SELECT/ENTER. The JPEG menu appears on the TV To rotate screen. Press 1/2 JPEG picture Folder1 Folder2 picture during showing clockwise or a picture to rotate the counter clockwise. Folder3 Folder4 Folder5 Notes Folder6 Folder7 on JPEG Recordings Folder8 Slide Depending Off Speed upon the size and number of the JPEG a long time for the DVD player to files, it could take Press 3/4 to select and SELECT/ENTER. 3 A list of files in the folderfolder, appears. Press RETURN to choice menu. a move to the MP3/WMA-JPEG If you " in a file list and want to return to the Folder the 34 buttons on the remote to highlight and press SELECT/ENTER to return to the " previous If want to view a a particular file, press file and press SELECT/ENTER Press TITLE to move Press MENU to pixels and burn another disc. the disc should Some disc may be incompatible due to different recording format or condition of disc. when copying move rename to move to to the next page. to the previous page. Picture3.jpg Picture4.jpg Picture5.jpg Picture6.jpg Picture7.jpg Speed Off 5/32 1024X768 Picture5.jpg Tip are three viewing Slide Speed options: Fast, Normal, Slow, and Off. Press 1/2 to highlight the Slide There then press 3/4 to select the option you want to use, and press SELECT/ENTER. To at other time, press STOP. viewing any 5 Thestop JPEG appears. menu them into the CD layout. by as ".jpe" or ".jpeg" extensions, please as ".jpg" files. ".jpg" extension will not be able to player. Even though the files are JPEG image files in windows explorer. names shown Picture2.jpg Slide File be read Folder1 1024X768 on be less than 650. or Picture1.jpg 20 reduce the resolution of the JPEG files If the files have Viewing the file proceeding starts. During viewing a file, press RETURN the previous menu (JPEG menu). Speed --- 3/4 to PLAY. 5/32 big When you are using software such as "Easy CD Creator" to burn the jpeg files into the CD-R, ensure that all the selected files have the ".jpg" extensions menu screen. you 4 highlight JPEG too Total number of files and folders are use are to less than 2 mega Tip list, read the disc's contents. If you don't see an ondisplay after several minutes, some of the files screen without this DVD Programmed Playback CD MP3 with Audio CD Programmed Playback WMA Repeat Programmed and MP3/WMA Disc To The The function enables you to store your favorite tracks from any disc in the player memory. Program Program repeat the track currently playing, press REPEAT. repeat all tracks REPEAT The Press PROGRAM 1 mode to enter E The the on during playback or in the Program Edit mode. the mark will appear to the right of the word side of the menu screen. stop Program right mark will Select 2 place Edit Program The a the program Repeat mode, menu list, press Track from the on menu screen. press REPEAT icon and "OFF" appears Repeat Erasing on icon and "ALL" appears Repeat To cancel Program mode; on Program the a third time. menu screen. List step 3 Repeat Program place on the Program additional tracks Edit mode. move to the Program list. 3 Use 3/4 to select the track that you wish to from the Program list. to list. on during playback (Audio CD and only) or in the stop mode to enter the mark will appear. 2 Press 2 to the selected track 2 to E The disappear. track, then press SELECT/ENTER a the second time. a MP3/WMA disc Note E on 1 Press PROGRAM Press PROGRAM to exit the the icon and "TRACK" appears Repeat screen. To contain 30 tracks. can Tracks erase 4 Press CLEAR. the The track will be erased from the Program list. list. E Program CD TRACK 1 TRACK 12 TRACK 2 TRACK 8 TRACK 1.mp3 TRACK 3 TRACK 10 TRACK 2.mp3 TRACK 4 TRACK 3 TRACK 3.mp3 E TRACK 8.mp3 TRACK 4.mp3 TRACK 7.mp3 Clear All TRACK 8 STER. 0: 56: 18 Audio CD 00:00 3 MP3/WMA menu steps The Clear All TRACK 8.mp3 NORM. 1 Follow as Complete Program 1-2 of "Erasing a List Track from Program above. All", then press SELECT/ENTER. TRACK 6.mp3 TRACK 7 the 2 Use 3/4 to select "Clear TRACK 3.mp3 TRACK 5.mp3 TRACK 6 Erasing List" TRACK 2.mp3 TRACK 4.mp3 TRACK 5 4 Program MP3 WMA complete Program The programs OFF are for the disc will be erased. also cleared when the disc is removed. menu Press 2. The programmed track you selected last is highlighted on the program list. Press 3/4 to select the track you want to start 5 playing. Press TITLE to move Press MENU to move to the next page. to the previous page. Press PLAY to start. 6 Playback begins in the order in which you programmed the tracks and "PROG." appears on the menu screen. Playback stops after all of the tracks on the Program list have 7 To played once. resume playback, normal select a playback from track of CD programmed (or MP3/WMA) list and then press SELECT/ENTER. "PROG." indicator disappears on the menu screen. 21 OPERATION Additional Information Last Condition DVD This Memory CD player memorizes the user settings for the last disc that you have viewed. Settings remain in memory even if you remove the disc from the player or switch off the player. If you load a disc that has its settings memo- rized, the latest stop position is automatically recalled. Notes -- -- Settings are stored in memory for use any time. This player does not memorize settings of a disc if you switch off the player before commencing to play it. Screen Saver The screen saver DVD in Player picture appears when you leave the stop mode for about five minutes. After the Screen Saver has been engaged for about five minutes, the DVD Player will automatically turn itself off. System Select You must select the TV appropriate system mode for your system. If NO DISC appears in the display window, press and hold PAUSE on the front 5 seconds to be able to select or ? a panel for more than system (PAL, NTSC, AUTO). When the selected system does not coincide with the system of your TV, normal color picture may not be displayed. AUTO: Select when DVD Multi NTSC: system player is connected with player is connected with player is connected with TV. Select when DVD NTSC-TV. PAL: Select when DVD PAL-TV. 22 Troubleshooting Check the following guide for the possible cause of a before problem contacting service. Cause Symptom Correction No power. The power cord is disconnected. Plug the power securely. The power is on, but the DVD player does not work. No disc is inserted. Insert a disc. (Check that the DVD or, audio CD indicator in the display No The TV is not set to receive DVD picture. signal output. window is lit.) Select the on the TV so player cord into the wall outlet appropriate video input mode the picture from the DVD appears on the TV Connect the video cable The video cable is not connected screen. securely. securely. No sound. The connected TV power is turned off. Turn The equipment connected with the audio cable is not set to receive DVD Select the correct input mode of the audio receiver so you can listen to the sound from the DVD player. signal output. The audio cables are not connected on the TV. Connect the audio cable securely. securely. The power of the equipment connected with the audio cable is turned off. The Digital Audio Output position. is set to the playback picture is The disc is Set the Digital Audio Output to the position, then turn on the DVD player again by pressing POWER. correct wrong The Turn on the equipment connected with the audio cable. Clean the disc. dirty. poor. The DVD not start player does playback. No disc is inserted. Insert a disc. (Check that the DVD, or audio CD indicator in the DVD display is lit.) An unplayable disc is inserted. Insert a playable disc. the disc (Check type, color system, and Regional code.) The disc is placed upside The disc is not The remote control does not work properly. placed Place the disc with the down. down. within the guide. playback Place the disc on the disc tray inside the guide. The disc is dirty. Clean the disc. The level is set. Cancel the Rating function the rating level. Rating The remote control is not pointed at the remote sensor of the DVD player. correctly change Point the remote control at the remote of the DVD player. sensor the remote control within 23 ft The remote control is too far from the DVD player. Operate (7 m). There is an obstacle in the path of the remote control and the DVD player. Remove the obstacle. The batteries in the remote control exhausted. Replace are or side the batteries with new ones. 23 REF NC Language Code Enter the (See appropriate 12). List code number for the initial settings "Disc Audio", "Disc Subtitle" and/or "Disc Menu" page Code Language Code Language Code Language Code Language 6566 Abkhazian 7074 Fiji 7678 Lingala 8373 Singhalese 6565 Afar 7073 Finnish 7684 Lithuanian 8375 Slovak 6570 Afrikaans 7082 French 7775 Macedonian 8376 Slovenian 8381 Albanian 7089 Frisian 7771 Malagasy 8379 Somali 6577 Ameharic 7176 Galician 7783 Malay 6983 Spanish 6582 Arabic 7565 Georgian 7776 Malayalam 8385 Sudanese 7289 Armenian 6869 German 7784 Maltese 8387 Swahili 6583 Assamese 6976 Greek 7773 Maori 8386 Swedish 6588 Aymara 7576 Greenlandic 7782 Marathi 8476 Tagalog 6590 Azerbaijani 7178 Guarani 7779 Moldavian 8471 Tajik 6665 Bashkir 7185 Gujarati 7778 Mongolian 8465 Tamil 6985 Basque 7265 Hausa 7865 Nauru 8484 Tatar 6678 Bengali; Bangla 7387 Hebrew 7869 Nepali 8469 Telugu 6890 Bhutani 7273 Hindi 7879 Norwegian 8472 Thai 6672 Bihari 7285 Hungarian 7982 Oriya 6679 Tibetan 6682 Breton 7383 Icelandic 8065 Panjabi 8473 Tigrinya 6671 Bulgarian 7378 Indonesian 8083 Pashto, Pushto 8479 Tonga 7789 Burmese 7365 Interlingua 7065 Persian 8482 Turkish 6669 Byelorussian 7165 Irish 8076 Polish 8475 Turkmen 7577 Cambodian 7384 Italian 8084 Portuguese 8487 Twi 6765 Catalan 7465 Japanese 8185 Quechua 8575 Ukrainian 9072 Chinese 7487 Javanese 8277 Rhaeto-Romance 8582 Urdu 6779 Corsican 7578 Kannada 8279 Rumanian 8590 Uzbek 7282 Croatian 7583 Kashmiri 8285 Russian 8673 Vietnamese 6783 Czech 7575 Kazakh 8377 Samoan 8679 Volap k 6865 Danish 7589 Kirghiz 8365 Sanskrit 6789 Welsh 7876 Dutch 7579 Korean 7168 Scots Gaelic 8779 Wolof 6978 English 7585 Kurdish 8382 Serbian 8872 Xhosa 6979 Esperanto 7679 Laothian 8372 Serbo-Croatian 7473 Yiddish 6984 Estonian 7665 Latin 8378 Shona 8979 Yoruba 7079 Faroese 7686 Latvian, Lettish 8368 Sindhi 9085 Zulu 24 Country Code Enter the appropriate List code number for the initial setting "Country Code" (See page 14). Code Country Code Country Code Country Code AD Andorra ER Eritrea LC Saint Lucia SC Country Seychelles AE United Arab Emirates ES Spain LI Liechtenstein SD Sudan AF ET Ethiopia LK Sri Lanka SE Sweden AG Afghanistan Antigua and Barbuda FI Finland LR Liberia SG Singapore AI Anguilla FJ Fiji LS Lesotho SH Saint Helena AL Albania FK Falkland Islands LT Lithuania SI Slovenia AM Armenia FM Micronesia LU Luxembourg SJ Svalbard and Jan AN Netherlands Antilles FO Faroe Islands LV Latvia AO Angola FR France LY Libya SK Slovak AQ Antarctica FX France MA Morocco SL Sierra Leone AR Argentina (European Territory) MC Monaco SM San Marino AS American Samoa GA Gabon MD Moldavia SN Senegal AT Austria GB Great Britain MG Madagascar SO Somalia AU Australia GD Grenada MH Marshall Islands SR Suriname AW Aruba GE MK Macedonia ST Saint Tome and AZ Azerbaidjan GF Georgia French Guyana ML Mali SU Former USSR BA Bosnia-Herzegovina GH Ghana MM El Salvador Barbados GI Gibraltar MN Myanmar Mongolia SV BB SY Syria BD Bangladesh GL Greenland MO Macau SZ Swaziland BE Belgium GM Gambia MP Northern Mariana Islands TC Turks and Caicos Islands BF Burkina Faso GN Guinea MQ Martinique (French) TD Chad BG Bulgaria GP MR Mauritania TF BH Bahrain GQ Guadeloupe (French) Equatorial Guinea MS Montserrat BI Burundi GR Greece MT Malta TG Togo BJ Benin GS S. MU Mauritius TH Thailand BM Bermuda Isls. MV Maldives TJ Tadjikistan BN Brunei Darussalam GT Guatemala MW Malawi TK Tokelau BO Bolivia GU Guam MX Mexico TM Turkmenistan BR Brazil GW Guinea Bissau MY TN Tunisia BS Bahamas GY MZ TO Tonga BT Bhutan HK Guyana Hong Kong Malaysia Mozambique NA Namibia TP East Timor BV Bouvet Island HM Heard and McDonald NC New Caledonia TR Turkey BW Botswana Islands NE Niger TT Trinidad and BY Belarus HN Honduras NF Norfolk Island TV Tuvalu Georgia & S. Sandwich (USA) Mayen Islands Republic Principe French Southern Territories (French) Tobago BZ Belize HR Croatia NG Nigeria TW Taiwan CA Canada HT Haiti NI Nicaragua TZ Tanzania CC Cocos HU Hungary NL Netherlands UA Ukraine CF (Keeling) Islands Central African Republic ID Indonesia NO Norway UG Uganda CG Congo IE Ireland NP Nepal UK United CH Switzerland IL Israel NR Nauru UM USA Minor CI Ivory Coast IN India NU Niue CK Cook Islands IO British Indian Ocean NZ New Zealand US United States CL Chile Territory OM Oman UY Uruguay CM Cameroon IQ Iraq PA Panama UZ Uzbekistan CN China IR Iran PE Peru VA Vatican CO Colombia IS Iceland PF VC Saint Vincent & CR Costa Rica IT Italy PG Polynesia (French) Papua New Guinea CS Former Czechoslovakia JM Jamaica PH Philippines VE Venezuela CU Cuba JO Jordan PK Pakistan VG CV Cape Verde JP Japan PL Poland VI Virgin Islands (British) Virgin Islands (USA) CX Christmas Island KE Saint Pierre and VN Vietnam Cyprus KG Kenya Kyrgyzstan PM CY PN Pitcairn Island VU Vanuatu CZ Czech KH Cambodia6 PR Puerto Rico WF Wallis and Futuna Islands KI Kiribati PT Portugal WS Samoa DJ Republic Germany Djibouti KM Comoros PW Palau YE Yemen DK Denmark KN Saint Kitts & Nevis PY Paraguay YT DM Dominica KP North Korea QA Qatar YU Mayotte Yugoslavia DE Anguilla Kingdom Outlying Islands Miquelon City State Grenadines DO Dominican KR South Korea RE Reunion ZA South Africa DZ Algeria KW Kuwait RO Romania ZM Zambia EC Ecuador KY Cayman Islands RU Russian Federation ZR Zaire EE Estonia KZ Kazakhstan RW Rwanda ZW Zimbabwe EG Egypt LA Laos SA Saudi Arabia EH Western Sahara LB Lebanon SB Solomon Islands Republic (French) 25 REF NC Specifications General Power Power requirements AC 110-240V consumption 14W Dimensions Mass (approx.) , 50/60 Hz 430X60X242mm(wxhxd) 2.4 (approx.) kg Operating temperature 5˚C to 35˚C Operating humidity 5%to90% (41˚F to 95˚F) System Laser Semiconductor laser, Signal system PAL/NTSC Frequency DVD(PCM96kHz):8Hzto44kHz DVD(PCM48kHz):8Hzto22kHz response wavelength 650 nm CD:8Hzto20kHz ratio Signal-to-noise (ANALOG OUT More than 100dB Harmonic distortion Less than 0.008% Dynamic More than 100 dB range More than 95 dB connectors only) (DVD) (CD) Outputs VIDEO OUT 1 Vp-p 75 Ω, sync negative, RCA jack x 1 / SCART (TO TV) Audio output (digital audio) 0.5V(p-p),75Ω,RCAjackx1 Audio output (analog audio) 2.0Vrms(1KHz,0dB),600Ω,RCAjack(L,R)x1/SCART(TOTV) Accessory Videocable.......................1 Audiocable.......................1 Remotecontrol....................1 Batteries.........................2 Design and specifications are subject to change without notice. Manufactured under license from Confidential unpublished works. DTS and DTS Digital Out 26 are Dolby Laboratories. Dolby and the double-D symbol are trademarks Copyright 1992-1997 Dolby Laboratories. All rights reserved. trademarks of Digital Theater Systems, Inc. of Dolby Laboratories. UARANTEE CERTIFICATION (to fill in when purchasing) Model:DVD-630............................................serialnumber................... Purchasereceiptnumber(tobeattached)........................................................ Costumer'sname:.......................................................................... Address:................................................................................. Townandpostcode:........................................................................ ONDITIONS OF GUARANTEE The appliance is covered by guarantee for the first user on the basis of the legislative regulations in force. Any components that are found to be defective as a result of proven manufacturing faults will be replaced free of charge by out authorised assistance centres during the guarantee period. MELCHIONI SpA, European concessionaire of IRRADIO, reserves the right in certain cases to replace the appliance found to be defective with an indentical or similar product. This guarantee will be considered as valid in the other member states of the European Union for all the repairs carried out in the authorised assistance centres or by authorised retailers of IRRADIO. This product will in no circumstances be considered as defective as a result of material or manufacturing faults if it has been adapted, altered or adjusted to bring it into line with the safety regulations or techniques in force at national or local level in a country other than the one for which it was originally designed and manufactured. Home repairs or checks on presumed defects are not covered by the guarantee. The guarantee does not include the aerial or mains power supply systems, and it will lose its validity if the appliance has been tampered with, has been incorrectly installed damaged as a consequence of being dropped or during transport, or due to any causes that cannot be attributed to manufacturing defects or defects caused by factors outwith the control of the concessionaire, including, merely by way of example, lightning, flooding, fire, public disorder, incorrect ventilation, incorrect power supply or inverted polarity. The guarantee does not cover professional uses of the product. This guarantee does not involve any compensation for direct or indirect damage of any kind caused to persons or property due to the period during which the appliance operates incorrectly. Any extensions granted or assured by the retailer will be the responsibility of this latter. For any factors not taken into consideration in this certificate, our General Sales Conditions will apply. This certificate should always accompany the appliance when returned for repairs, and it is valid only if produced together with the purchase receipt or invoice. For information on the authorised assistance centres in ltaly, contact: Free Or phone our number 800 213 290 web site The lrradio Melchioni www. melchioni.it products are S.p.A., via P. distributed by: Colletta 37, 20135 Milan Melchioni S.p.A. - Sede: 20135 Milano - Via P. e-mail: [email protected] Colletta, 37 P/NO : 3834RS0054H