CV Elena Pierro - Università degli Studi della Basilicata

EUROPEAN
CURRICULUM VITAE
FORMAT
PERSONAL INFORMATION
Name
Telephone
Mobile Phone
E-mail
Nationality
Date of birth
PIERRO ELENA
+39 0971 20 5207
+39 3486278998
[email protected]
Italian
30/11/1981
WORK EXPERIENCE
• Dates
• Name and address of the company
• Type of business or sector
• Occupation or position held
• Main activities and responsibilities
• Dates
• Name and address of the company
• Type of business or sector
• Occupation or position held
• Main activities and responsibilities
• Dates
• Name and address of the company
• Type of business or sector
• Occupation or position held
• Main activities and responsibilities
23/12/2011
Università degli Studi della BASILICATA
Scuola di Ingegneria (SI-UniBas)
University
Assistant Professor
Teacher of the Course “Applied Mechanics”.
Research activities on the topics: contact mechanics and structural vibrations.
14/06/2011 - 14/12/2011
Politecnico di Bari
Facoltà di Ingegneria, Dipartimento di Ingegneria Meccanica e Gestionale (DIMeG)
University
Temporary Researcher
Research activity on the project: “Studio teorico-sperimentale della resistenza al peeling e al
distacco di adesivi biomimetici micro- e nano- strutturati”
22/11/2010 - 22/05/2011
Politecnico di Bari
Facoltà di Ingegneria, Dipartimento di Ingegneria Meccanica e Gestionale (DIMeG)
University
Temporary Researcher
Research activity on the project: “Analisi delle proprietà tribologiche e adesive di superfici microe nano- tramite l’utilizzo della seguente strumentazione: sistema di nanoindentazione e
microscratch, tribometro e microscopio a forza atomica (AFM)”
• Dates
• Name and address of the company
• Type of business or sector
• Occupation or position held
• Main activities and responsibilities
06/09/2010 - 06/09/2011
Consiglio Nazionale delle Ricerche (CNR) - Istituto IOM di Trieste
Research Institute
Research fellow
Research activity on the project: “Studio teorico sperimentale dei fenomeni dinamici e di contatto
in micro-strutture meccaniche”
• Dates
• Name and address of the company
08/06/2010 -l 08/09/2010
Politecnico di Bari
CV Elena Pierro
1
• Type of business or sector
• Occupation or position held
• Main activities and responsibilities
• Dates
• Name and address of the company
• Type of business or sector
• Occupation or position held
• Main activities and responsibilities
Facoltà di Ingegneria, Dipartimento di Ingegneria Meccanica e Gestionale (DIMeG)
University
Temporary Researcher
Research activity on the project: “Analisi dinamico-vibrazionale di cantilever per microscopio a
forza atomica (AFM) in presenza di contatto intermittente e/o interazioni non lineari con il
substrato”
06/10/2008 – 28/05/2010
IVECO S.p.a. (FIAT Group)
Trucks and Commercial Vehicles – Lungo Stura Lazio 49, Turin, Italy
Engineering industry
Employed – 6° indeterminate level
Structural calculations, NVH, durability in light commercial vehicles (Innovation & Advanced
Development - Computations & Statistics – LCV)
• Dates
• Name and address of the company
• Type of business or sector
• Occupation or position held
• Main activities and responsibilities
27/03/2008 – 07/06/2008
Istituto Tecnico Industriale "Guglielmo Marconi", Piazza Poerio 2, 70126 Bari, ITALY
Senior High School
Teacher
Teacher of the Course: "Mechanical Systems"
• Dates
• Name and address of the company
• Type of business or sector
10/09/2007 – 07/03/2008
LMS International, Researchpark Z1, Interleuvenlaan 68, 3001 Leuven (Belgium)
Measurement and Systems - Engineering Innovation of Software and Hardware Systems for
Noise and Vibration applications
Stage in the RTD group
1) Modal testing, through LMS Test.Lab 8A, on a fuselage panel made of composite material:
comparison of the effects of different measure techniques on the data quality (UNVICO-2
PROJECT);
2) Vibro-acoustic modal analysis of the helicopter EUROCOPTER EC-135, through LMS
Test.Lab 8A (FRIENDCOPTER Project)
• Occupation or position held
• Main activities and responsibilities
EDUCATION AND TRAINING
• Dates
• Name and type of organisation
providing education and training
• Type of training
Winter School "Nano – Tribology”
• Dates
• Name and type of organisation
providing education and training
• Type of training
2 – 4 November 2010
Politecnico di Bari, Facoltà di Ingegneria, Dipartimento di Ingegneria Meccanica e Gestionale
(DIMeG)
Complete course of training on Scanning Probe Microscope - Ntegra Prima
• Dates
• Name and type of organisation
providing education and training
• Type of training
20 – 24 April 2009
CRF – FIAT Group, Orbassano (Turin)
• Dates
• Name and type of organisation
providing education and training
• Type of training
CV Elena Pierro
17 – 28 January 2011
Technical University of Denmark, Mechanical Engineering Department
CANTOR Advanced Course - NVH in Transportation Industry
15 – 17 April 2009
Altair Engineering Srl, Turin
Altair Optistruct Optimization
2
• Dates
• Name and type of organisation
providing education and training
• Type of training
• Dates
• Name and type of organisation
providing education and training
• Type of training
• Dates
• Name and type of organisation
providing education and training
• Type of training
• Dates
• Name and type of organisation
providing education and training
• Type of training
• Dates
• Name and type of organisation
providing education and training
• Type of training
• Dates
• Name and type of organisation
providing education and training
• Level in national classification
• Principal subjects/occupational
skills covered
• Dates
• Title of qualification awarded
• Dates
• Name and type of organisation
providing education and training
• Title of qualification awarded
• Level in national classification
• Thesis
• Dates
• Name and type of organisation
providing education and training
• Title of qualification awarded
• Level in national classification
18 – 19 September 2008
K.U.Leuven Department of Mechanical Engineering, PMA, Leuven (Belgium)
Seminar on Advanced Techniques in Applied and Numerical Acoustics (ISAAC19)
16 – 20 June 2008
CISM (International Centre for Mechanical Sciences), Udine (Italy)
Advanced Nonlinear Strategies for Vibration Mitigation and System Identification
18 – 19 September 2007
K.U.Leuven Department of Mechanical Engineering, PMA, Leuven (Belgium)
Course on Modal Analysis: Theory and Practise (ISMA 32)
18 – 19 July 2007
LMS Italy, Novara (Italy)
LMS Virtual.Lab Motion Training
19 June 2006
Ancona (Italy), Facoltà di Ingegneria dell’Università Politecnica delle Marche
Course on Vibration Measurements By Laser Techniques
01 June 2006
Politecnico di Bari, Facoltà di Ingegneria, Dipartimento di Ingegneria Meccanica e Gestionale
(DIMeG).
Winner of the PhD course scholarship in “Mechanical and Biomechanical Design”
Topic of the research: “Noise and Mechanical Vibrations in the Design Process of
Machines”;
Research group: Applied Mechanics;
01/2006
Qualification as Engineer, Italian Association Engineers
2000 – 2005
Politecnico di Bari, Facoltà di Ingegneria, Corso di Laurea in Ingegneria Meccanica
MSc in “Mechanical Engineering”
110/110 cum laudae
Subject: Mechanical vibrations
Title: “Study and dynamic characterization of a microelectromechanical system”
Supervisors: Prof. Ing. Tommaso CONTURSI, DdR. Ing. Giuseppe CARBONE, DdR.
Ing. Leonardo SORIA
1995 – 2000
Di Cagno Abbrescia, Secondary high school
Diploma in scientific studies
100/100
PERSONAL SKILLS
AND COMPETENCES
MOTHER TONGUE
ITALIAN
OTHER LANGUAGES
CV Elena Pierro
3
• Reading skills
• Writing skills
• Verbal skills
SKILLS
AND COMPETENCES
ADDITIONAL INFORMATION
PUBLICATIONS
ENGLISH
Excellent
Excellent
Excellent
INFORMATICS SKILLS: utilization of the simulation software, such as Mathematica and Matlab,
besides the FEM simulator Ansys, Nastran, Hypermesh and Optistruct (Altair), and the Cad
software Autocad and Catia. Moreover, the LMS software, Virtual.Lab and Test.Lab.
International Journals:
1. G. Carbone, E. Pierro, G. Recchia, "Loading-unloading hysteresis loop of randomly
rough adhesive contacts", Physical Review E - Statistical, Nonlinear, and Soft Matter
Physics, Volume 92, Issue 6, 2015.
2. L. Heepe, G. Carbone, E. Pierro, A. E. Kovalev, S. N. Gorb, "Adhesion TiltTolerancy in Bio-Inspired Mushroom-Shaped Adhesive Microstructure", Applied
Physics Letters, 104, 011906, 2014.
3. CARBONE G., PIERRO E., A review of adhesion mechanisms of mushroom-shaped
microstructured adhesives, Meccanica, 48 (8), 1819-1833, doi: 10.1007/s11012-0139724-9, invited paper, (2013).
4. CARBONE G., PIERRO E., Effect of interfacial air entrapment on the adhesion of
bio-inspired mushroom-shaped micro-pillars, Soft Matter, 8 (30), 7904-7908,
doi:10.1039/C2SM25715G, (2012).
5. CARBONE G., PIERRO E., Sticky bio-inspired micropillars: Finding the best shape,
SMALL, 8 (9), 1449-1454, doi: 10.1002/smll.201102021 (2012)
6. CARBONE G., PIERRO E., The influence of the fractal dimension of rough profiles
on the adhesive contact of elastic materials, Journal of Adhesion Science and
Technology invited paper, 26 (22), 2555-2570, DOI:10.1163/156856111X623140
(2012).
7. G. Carbone, E. Pierro, S. N. Gorb, “Origin of the superior adhesive performance of
mushroom shaped microstructured surfaces”, Soft Matter, codice DOI:
10.1039/C0SM01482F, 2011, impact factor: 4.87.
8. L. Soria, E. Pierro, G. Carbone, T. Contursi: "Tuning fork microgyrometers: Narrow
gap vs. wide gap design" – Journal of Sound and Vibration, Volume 322, Issues 1-2,
24 April 2009, Pages 78-97, impact factor: 1.414.
9. E. Pierro, E. Mucchi, L. Soria, A. Vecchio: "On the vibro-acoustical operational
modal analysis of a helicopter cabin"- Mechanical Systems and Signal Processing,
Volume 23, Issue 4, May 2009, Pages 1205-1217, impact factor: 2.075.
International Conferences:
1. AFFERRANTE L., BOTTIGLIONE F., PIERRO E., CARBONE G., A bio-inspired
micro-structured surface with anisotropic adhesion, World Tribology Congress 2013
Torino, Italy, September 8 – 13, 2013, isbn 978-88-90818509.
2. BOTTIGLIONE F., AFFERRANTE L., PIERRO E., CARBONE G., Tuning roughness
to design robust superhydrophobic surfaces, World Tribology Congress 2013 Torino,
Italy, September 8 – 13, 2013, isbn 978-88-90818509.
3. PIERRO E., CARBONE G., AFFERRANTE L., BOTTIGLIONE F., Adhesive
performance of mushroom-shaped micro-pillars with interfacial micro-bubbles of air,
World Tribology Congress 2013 Torino, Italy, September 8 – 13, 2013, isbn 978-8890818509.
4. CARBONE G., PIERRO E., The amazing adhesion of mushroom shaped
microstructured surfaces, Proceedings of the ASME 2012 International Mechanical
Engineering Congress & exposition, IMECE2012, November 9-15, 2012, Houston,
Texas, USA.
5. CARBONE G., PIERRO E., “Assessment of the Performance of Mushroom-Shaped
Micro-Structured Surfaces”, ECOTRIB 2011, 3rd European Conference on Tribology,
Vienna, Austria June 7 - 9, 2011
CV Elena Pierro
4
6. G. Carbone, E. Pierro, "Theoretical assessment of the adhesion performance of
microstructured surfaces", FANAS Conference, October 25 – 28, 2010, Saarbrücken,
Germany.
7. E. Pierro, E. Mucchi, L. Soria, A. Vecchio: "EMA and OMA techniques for
vibroacustically coupled systems: the example of a helicopter cabin"- IOMAC 2009,
Porto Novo, Ancona, Italia, 4-6 May 2009, pp. 415-422.
8. E. Mucchi, E. Pierro, A. Vecchio, "Experimental guidelines for NVH improvements in
helicopter vibro-acoustic comfort" - Proceedings of ASME, ISBN: 978-0-7918-4898-2,
the 22nd Biennal Conference on Mechanical Vibration and Noise, August 30September 2, 2009, San Diego, California, USA.
9. Giuseppe Carbone, Elena Pierro, Leonardo Soria, “Microcantilever dynamics: effect
of Brownian excitation in liquids”, SEM09 Annual Conference, Albuquerque, New
Mexico, June 1-4, 2009.
10. Luczak M., Vecchio A., Mucchi E., Shigeoka T., Pierro E., “Sensor location
optimization in experimental modal analysis of a composite fuselage panel”, 4th
European Workshop on Structural Health Monitoring; Cracow; Poland; 2 July 2008
through 4 July 2008
11. M.Luczak, A. Vecchio, B. Peeters, E. Pierro: "Contact versus Non-contact
measurement of a Large Composite Fuselage Panel" - AIVELA, Ancona, 17 June
2008, 8th Intl Conference on Vibration Measurements by Laser Techniques, Proc. of
SPIE Vol. 7098.
12. E. Pierro, E. Mucchi, A. Vecchio: "Using P-U probes for the experimental vibroacoustical modal analysis of a helicopter" - Proceedings of ISMA2008, Leuven,
Belgium, 2008, September 15-17, ISBN 978-90-7380-286-5.
13. M.Luczak, A. Vecchio, E. Mucchi, E. Pierro: "Experimental Modal Analysis Of
Large Fuselage Panel For Composite Structure: Contact And Non-Contact
Measurement"- Proceedings of ISMA2008, Leuven, Belgium, 2008, September 15-17,
ISBN 978-90-7380-286-5.
14. L. Soria, E. Pierro, G. Carbone, T. Contursi, L. Mangialardi: "MEMS-based Tuning
Fork microgyroscopes: Dynamical response and functional design"- Proceedings of
ISMA2008, Leuven, Belgium, 2008, September 15-17, ISBN 978-90-7380-286-5.
National Conferences:
1. L. Soria, E. Pierro, G. Carbone, T. Contursi: "Theoretical study of the dynamical
response of a MEMS-based gyroscope" – AIMETA, Brescia, 11- 14 Settembre 2007,
XVIII Congresso nazionale - AIMETA, Associazione Italiana di Meccanica Teorica ed
Applicata.
2. G. Carbone, E. Pierro, L. Mangialardi, “Adhesive contact of rough surfaces: the
influence of fractal geometry”, AIMETA, Bologna, 12-15 Settembre 2011.
3. G. CARBONE, E. PIERRO, Superlative adhesion of mushroom shaped
microstructured surfaces, AIMETA 2011 12-15 sept 2011
Book Chapter:
1. MUCCHI E., PIERRO E., and VECCHIO A.,"Advanced vibro-acoustic techniques for
noise control in helicopters", Noise Control: Background, Theory and Experiments,
ISBN 978-953-307-918-9, InTech - Open Access Publisher, 2011.
Other publications:
1. E. Pierro: “Le Vibrazioni Meccaniche e il Rumore nella Progettazione delle
Macchine”, Tesi di Dottorato in Progettazione Meccanica e Biomeccanica XXI Ciclo,
Politecnico di Bari, Bari 2009.
CV Elena Pierro
5