Metal processing machines

ASTA ON­ LINE
BITIESS MICROTECNICA SA (CH)
Metal processing machines
Via San Carlo 34 ­ 6917 Barbengo
(Bitiess Microtecnica SA)
Data chiusura: mercoledì 30 OTTOBRE dalle 14:00
Visita e ispezione:
mercoledì 23 ottobre da 09:00 a 16:00
Via San Carlo 34 ­ 6917 Barbengo (Svizzera)
Offerte solo via Internet!
16­10­13 14.31
www.TroostwijkAuctions.com
mercoledì 30 ottobre 2013 BITIESS MICROTECNICA SA
Special condition
Data chiusura
Visita e ispezione
Mercoledì 30 ottobre 2013 dalle 14:00 CET
mercoledì 23 ottobre da 09:00 a 16:00 CET
Bitiess Microtecnica SA
Via San Carlo 34
6917 Barbengo, Svizzera
Società che organizza questa Asta TROOSTWIJK AG
on­line
Seefeldstrasse 45, Postfach 522
CH­8034 ZÜRICH, Svizzera
Telefono: +41 34 411 31 80
Fax: +41 34 411 31 89
E­mail: [email protected]
Commissioni d'asta
18,00%
I.V.A.
8,00%
Ritiro
lunedì 4 novembre da 09:00 a 16:00 CET
martedì 5 novembre da 09:00 a 16:00 CET
mercoledì 6 novembre da 09:00 a 16:00 CET
giovedì 7 novembre da 09:00 a 16:00 CET
Bitiess Microtecnica SA
Via San Carlo 34
6917 Barbengo, Svizzera
Viewing
Please note that this concerns an ascending auction sale, preceded by a viewing
day. Placing a bid without viewing the equipment is at one’s own risk. Please see
articles 3 and 6 of the General Conditions.
Informationen zur Abholung
The buyer is fully responsible for the dismantling, loading and transportation of the
bought lots. Troostwijk AG cannot accept any responsibility unless indicated
otherwise. The collection/pick­up will only take place on the mentioned delivery
date/time and address. If the collection of the goods happens later, the customer is
responsible for the costs (hire, extra costs)
Informationen zur MwSt.
8% over the highest bid including Premium.
Bezahlung
Foreign buyers, i.e. buyers not being based in Switzerland, have to pay the legal
Swiss VAT as deposit to the auctioneer. After reception of the original, valid
exportation documents, which are properly stamped to prove that the export is
carried out, the auctioneer will refund the Swiss VAT paid as deposit.
Payments have to be effected to Troostwijk AG, Zürich
Troostwijk account for CHF: UBS, CH­8098 Zürich, Account number 230­
642.916.01W, Clearing number 230, Swift Code: UBSWCHZH80A, IBAN: CH30
0023 0230 6429 1601 W
Aufgeld
Verlängerung
Kombinationen
Troostwijk account for Euros: UBS, CH­8098 Zürich, Account number 230­
642.916.60Y, Clearing number 230, Swift Code: UBSWCHZH80A, IBAN: CH47
0023 0230 6429 1660Y
18% over the highest bid
If a bid is made in the last 10 minutes before the lot closes, the closing time of that
lot will be extended with 5 minutes until no bids are made.
All lots in a combination will be sold individually first. After the last lot is sold, the total
of bids is raised 10%. This is the starting bid of the combination. If the combination
www.TroostwijkAuctions.com
Versteigerungsbedingungen
Kontakt
is sold it overrules the individual bids, if not the individual bids are applicable.
On the auction the general terms and conditions of the online auction are applicable
concerning the (possible) purchase of moveable assets, furthermore these specific
terms and conditions.
E­Mai: [email protected] Tel.: +41 34 411 31 80
www.TroostwijkAuctions.com
Lotto
1
2
3
4
5
6
7
8
9
10
Quantita Descrizione
Prezzo di partenza
1 Elettroerosione
10.000,00
Charmilles, Roboform 55P, anno di fabbricazione 2003, numero di serie 25335,
Elettroerosione, Capacità di lavoro assi x­y­z 600x400x450mm, angolo di rotazione 360°,
Dimensioni tavola 750x500mm, max. Peso utensile 1000kg, misure macchina circa
2895x2580x1570mm, Peso circa 3600kg, Ingombro macchina circa 3500x4500mm,
Alimentazione elettrica Trifase, 400V, 5A, 50­60Hz, 5kVA con documenti macchina in
formato PDF
1 Elettroerosione
7.500,00
Agie, Agieant Progress 2, anno di fabbricazione 2003, numero di serie 27, Elettroerosione,
Capacità di lavoro assi x­y­z, Tavola 700x450mm, Dimensioni macchina circa
1800x2000x2250mm e Pannello di controllo, mit Intech Harz Cambio utensili,
Alimentazione di rete 3x400V, 50Hz, 12.1kVA, 17.5A, Peso ca. 2650kg, mit armadietto
porta­utensili incluso il contentuto e i libri macchina
1 Elettroerosione
6.000,00
Charmilles, Roboform 31, anno di fabbricazione 1998, numero di serie 8­5269/630244,
Elettroerosione, dimensioni di lavoro assi x­y­z 350x250x300mm, C=360°, dimensioni
tavola 500x400mm, peso utensili max. 500kg, Dimensioni macchina ca.
2050x1800x1550mm, ingobmbro ca. 3200x1800mm, Alimentazione di rete trifase, 380V,
5A, 50Hz, 5kVA, Peso ca. 2500kg, documenti macchina in formato PDF
1 Elettroerosione
500,00
Agie, MS/3/AG50­120H, anno di fabbricazione 1986, numero di serie 05/182,
Elettroerosione, dimensioni tavola 560x335mm, ingombro macchina ca.
3000x2900x2000mm, con CNC Agiemeric 100, Alimentazione di rete 3x380V, 2.15kVA,
5.6A, 50Hz, con armadio porta utensili, con documenti macchina in formato PDF
1 Elettroerosione
500,00
Agie, EMT 20, numero di serie 34, Elettroerosione, Dimensioni di lavoro 380x250mm,
Altezza pezzo lavorato max. 160mm, Peso max. 120kg, Dimensioni macchina. ca.
1090x1090x1230mm, Alimentazione di rete 1x220V, 0.12kVA, 0.6A, Peso ca. 800kg, con
AcuRite Qwikcount II e sistema Orbi­Cut 3R, con tavolo di lavoro, accessori e
documentazione in PDF
1 Tornio CNC
1.500,00
AVM Angetini, Torn 10 CNC/Snupy, anno di fabbricazione 1998, numero di serie 792E,
Tornio CNC, distanza tra le punte 600mm, tavola 280mm, Cap. mandrino principale 60mm,
con CNC GE Fanuc Serie 21i­T, Capacità motore 15kW, Capacità mandrino 6000RPM,
Peso 3500kg, con documentazione in PDF
1 Centro di lavoro CNC
5.000,00
C.B. Ferrari, A17, anno di fabbricazione 1998, numero di serie 93041, Centro di lavoro
CNC, Dimensioni di lavoro assi x­y­z, Tavola 1250x560mm, Dimensioni macchina ca.
4000x3500x2600mm, con evacutaore truccioli, con CNC C.B. Ferrari E504, Peso ca.
7000kg
1 Centro di lavoro CNC
7.000,00
C.B. Ferrari, B13, anno di fabbricazione 2004, numero di serie 96595, Centro di lavoro
CNC, Dimensioni di lavoro assi x­y­z, Tavola 1200x400mm, dimensioni macchina ca.
2350x2700x2350mm, con controllo C.B. Ferrari E524, Peso ca. 4500kg.
1 Centro di lavoro CNC
7.000,00
Mikron, VCE750, anno di fabbricazione 2001, numero di serie 27108, Centro di lavoro
CNC, dimensioni di lavoro assi x­y­z, Dimensioni tavola 915x355mm, con controllo Haas,
Cambio utensili 20x, Alimentazione di rete 3x360­480V, 20A, Dimensioni macchina ca.
2400x2600x2700mm, con stazione di programmazione PC, Monitor
1 Fresatrice CNC
1.000,00
Isper, F2V, anno di fabbricazione 1998, numero di serie 98139, Fresatrice CNC ø­max.
40mm, Dimensioni tavola 870x265mm, Dimensioni macchina ca. 2500x1800x1950mm,
con controllo CNC Selca S3000, Peso ca. 2500kg, Alimentazione di rete 380V, 50Hz
Lotto
11
12
13
14
15
16
17
18
19
20
21
22
23
Quantita Descrizione
Prezzo di partenza
1 Fresatrice CNC
G. Bonza, 4VS, anno di fabbricazione 2005, numero di serie 477192, Fresatrice CNC,
Dimensioni di lavoro assi x­y­z 700x400x406mm, Dimensioni tavola 1270x254mm, con
controllo Elbo B44, Numero di giri 80­3800 G/Min., Dimensioni macchina ca.
1750x1600x2400mm, Utensili ISO 40, con libri macchina in PDF
1 Fresa­Alesatrice universale
Deckel, FP4M, numero di serie 2203­8242, Fresa­Alesatrice universale, Dimensioni di
lavoro assi x­y­z 490/500x390/400x385x400mm, escursione mandrino 2­assi 80mm,
Potenza motore principale 3.7/4.4 kW, Numero di giri 1425/2890mm­1, 18 Giri del
mandrino 50­2500min­1, Dimensioni utensile SK40, dimensioni tavola 274x842mm,
Superificie utile tavola angolare 460x800mm, peso consentito 400kg, con indicatore
digitale Heidenhain, Dimensioni macchina ca. 2500x2700x1935mm, Peso ca. 1800kg
1 Tornio universale
G. Bonza, 200 BL, numero di serie 35604, Tornio universale, distanza tra le punte 750mm,
con controllo digitale Elbo, B4U, Dimensioni macchina ca. 2100x1000x1800mm, con
armadio utensili, incluso contenuto di accessori diversi, Dimensioni ca. 600x520x910mm
1 Jig drilling machine
SIP, MP2C, numero di serie 251, Jig drilling machine, table dim. 450x268 mm, with round
table, diam. 300 mm, stroke drilling spindle 100 mm, max.distance between drilling spindle
and table 440 mm, speed 190­3000 rpm, machine dim.approx. 1100x1250x1900 mm,
weight approx. 1000 kg
1 Bench column drilling machine
Fehlmann, 718S, Bench column drilling machine, thread M1­M16, 0.75­14.0 mm, spindle
range 4500­400 rpm, 24 steps, machine dim.approx. 910x720x1850 mm
1 Column drilling machine
Aciera, 22S1VR, numero di serie 33,904, Column drilling machine
1 Deburring machine
KBM, 40, Deburring machine, range 1500­8000 rpm, with exhaust device
1 Manual press
Nobs, Manual press with various belongings
1 Rettificatrice a coordinate
Henri Hauser, 3SM, numero di serie 122/1035­220, Rettificatrice a coordinate, Dimensioni
di lavoro 400x250mm, Dimensioni tavola 547x320mm, con indicazione digitale Acu­Rite e
con convertitore ad alta frequenza Acomel, Tipo K3000, Dimensioni macchina ca.
1580x1490x2900mm, + Convertitore ca. 800x410x1520mm
1 Rettificatrice a coordinate
Henri Hauser, 5SM, numero di serie 34/4, Rettificatrice a coordinate, Dimensioni di lavoro
700x500mm, Misure tavola ca. 745x620mm, Dimensioni macchina ca.
3200x2100x2450mm, incluso scaffalatura con diversi accessori
1 Manual press
Luthy, Manual press
1 Rettificatrice esterna
H. Tschudin, HTG 400, numero di serie 691214, Rettificatrice esterna, Dimensioni
macchina ca. 1900x1200x1700mm, con armadio utensili, inclusi vari accessori, Misure. ca.
1440x500x1000mm e 2 scaffali con accessori
1 Rettificatrice in piano
Jones­Shipman, 1400, numero di serie 11­5­2714, Rettificatrice in piano, Dimensioni di
lavoro 203x610mm, Dimensioni tavola ca. 870x190mm, con tavolo magnetico con
indicatore digitale AccuRite, Dimensioni macchina ca. 2200x1100x2150mm, con 2 armadi
utenili e 1 und 1 scaffale con diversi accessori, +Aspiratore
1.500,00
2.500,00
1.000,00
100,00
400,00
200,00
200,00
100,00
500,00
500,00
25,00
500,00
750,00
Lotto
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
Quantita Descrizione
Prezzo di partenza
1 Rettificatrice in piano
Jones­Shipman, 1400, numero di serie BO76965, Rettificatrice in piano, Dimensioni di
lavoro 203x610mm, Dimensioni tavola 610x178, Movimento tavola in lunghezza 635mm,
Movimento tavola in orizzontale 203mm, Movimento in verticaleTesta di rettifica max.
279mm, +Piano magnetico, Dim. 600x200mm, con indicazione digitale, con armadio porta
utensili, + scaffalatura con accessori, +Aspiratore
1 Rettificatrice in piano
Jones­Shipman, 1400, numero di serie 64442, Rettificatrice in piano, Dimensioni lavoro
203x610mm, Dimensioni utili tavola 610x178, Movimento tavola in lunghezza 635mm,
Movimento tavola in orizzontale 203mm, Movimento in verticale della testa di rettifica max.
279mm, +Piano magnetico, Dim. 250x150mm, senza indicazione digitale, inclusa
scaffalatura con accessori, con Impianto di aspirazione New Aerodinaurica
1 Rettificatrice in piano
Stefor, RTB 8/5, Rettificatrice in piano, Dimensioni tavola 1100x385mm, con Piano
magnetico, Dim. 1050x440mm, max. Movimento tavola in lunghezza 880mm, Movimento in
orizzontale max. 500mm, Dimensioni mola 400x50x127mm, Peso macchina ca. 3800kg
1 Rettificatrice per utensili universale
Jungner, US2305, numero di serie 38, Rettificatrice per utensili universale, Peso della
macchina ca. 550kg, incluso armadio porta utensili, inclusi vari accessori, Dimensioni
macchina ca. 1100x850x1700mm, Dimensioni armadio ca. 605x510x905mm, con piccolo
carrello
1 Rettificatrice per utensili
Isper, ARP2, anno di fabbricazione 2004, numero di serie IE04259, Rettificatrice per
utensili con impianto di aspirazione, Peso ca. 350kg
1 Rettificatrice per utensili
Springman, SN/2, Rettificatrice per utensili con armadio utensili
1 Sabbiatrice
Peenmatic, Micro 750S, numero di serie 270 27/750­356, Sabbiatrice, Pressione 0­10bar,
Alimentazione 220V, Dimensioni 750x850x1420mm
1 Sabbiatrice
Peenmatic, Micro 600S, numero di serie FVG86/600­168, Sabbiatrice, Pressione 0­10bar,
Alimentazione 220V, con supporto, Dimensioni 600x600x1500mm
1 Sega a nastro
SawMil, SN 320, Sega a nastro, Dimensioni sega 3660x25x0.9mm
1 Tornio
Schäublin, 102VM, numero di serie 152740, Tornio, con slitta portautensili a croce, Morsa
di stringimento, etc.
1 Hardness tester
Hauser, Hardness tester
1 Bench drilling machine
Rütschi, KBF, numero di serie 69932, Bench drilling machine
1 Bench drilling machine
Rettor, WOF 8/1, numero di serie 210434, Bench drilling machine
1 Tornio da tavolo
Schäublin, 102, numero di serie 200545, Tornio da tavolo, con tavolo e Morsa a vite
Gressel, incluso armadio porta utensili e contenuto, tra l'altro morsa di stringimento, Utensili
manuali etc. Dimensioni tavolo ca. 3020x820x880mm
1 Tornio
Schäublin, 102­80, numero di serie 200546, Tornio, con slitta portautensili a croce e
accessori inclusa aspirazione
1 Tornio da tavolo
Schäublin, 102, numero di serie 200544, Tornio da tavolo, con Impianto di aspirazione, con
tavolo e morsa a vite Gressel, inoltre armadio portautensili incluso contenuto, tra l'altro:
Morsa a vite, Mole, Utensili manuali, etc. Dimensioni tavolo, ca. 3020x820x880mm
750,00
750,00
750,00
200,00
500,00
100,00
100,00
100,00
1.000,00
1.000,00
100,00
20,00
20,00
500,00
1.000,00
500,00
Lotto
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
Quantita Descrizione
Prezzo di partenza
1 Tornio da tavolo
Schäublin, 102, numero di serie 190108, Tornio da tavolo, con Tavolo oltre a armadio
portautensili con contenuto, tra l'altro Morsa di stringimento, Mole, Utensili manuali, etc.
Dimensioni tavolo ca. 3020x820x880mm
1 Tornio da tavolo
Schäublin, 102, numero di serie 190107, Tornio da Tavolo, con impianto di aspirazione,
con Tavolo e Morsa da banco Gressel, inoltre sowie armadio portautensili incluso
contenuto, tra l'altro Morsa di stringimento, Mole, Utensili manuali, etc. Dimensioni tavolo
ca. 3020x820x880mm
1 Tornio da tavolo
Schäublin, 102, numero di serie 190108, Tornio da tavolo, con Tavolo inotlre armadio
portautensili incluso contenuto, tra l'altro Morsa di stringimento, mole, utensili manuali, etc.
Dimensioni tavolo ca. 3020x820x880mm
1 Tornio
Schäublin, 102­80, numero di serie 200547, Tornio, con slitta portautensili a croce, Morsa
di stringimento, etc.
1 Drilling and milling machine
Hauser, 3 BA, numero di serie 407877 (73), Drilling and milling machine, working range
400x250 mm, with digital display
1 Macchina di misura 3D
Mitutoyo, QM­Measure 333, Macchina di misura 3D, con tavolo di lavor Lista e diversi
accessori
1 Measuring machine
Hauser, 215, numero di serie 2601, Measuring machine
1 Toolmakers microscope
Mitutoyo, 176944­E, numero di serie 320105, Toolmakers microscope, with 10­fold
amplification
1 Microscope
Leico, L2, Microscope, with 10­fold amplification
1 Toolmakers microscope
Hauser, Toolmakers microscope, with Isoma measuring sensor and light amplifier
1 Microscope
Leica, M32, Microscope, with light amplifier
1 Measuring machine
Mahr, Measuring machine, with granit measuring plate and belongings, PC, screen and
printer, "ösling" electrolytic marking system
1 Granit measuring table
Hommel, Granit measuring table, dim.approx. 1600x1000x840 mm, thickness 190 mm
1 Granit measuring table
Novalith, numero di serie 39579, Granit measuring table, dim.approx. 630x400x70 mm,
weight 54 kg
1 Measuring pin set
Measuring pin set, range 1.00­3.98, 299 pins complete
1 Measuring pin set
Measuring pin set, range 3.99­6.74, 299 pins complete
1 Measuring pin set
Measuring pin set, range 6.75­9.05, 231 pins complete
1 Measuring pin set
Measuring pin set, range 9.06­11.25, 220 pins complete
1 Measuring pin set
Measuring pin set, range 11.26­13.00, 175 pins complete
1 Measuring pin set
Measuring pin set, range 13.00­14.00, 101 pins complete
500,00
500,00
500,00
1.000,00
200,00
1.000,00
300,00
250,00
200,00
100,00
100,00
500,00
250,00
50,00
50,00
50,00
50,00
50,00
50,00
50,00
Lotto
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
84
85
Quantita Descrizione
Prezzo di partenza
2 Outside micrometers
Outside micrometer, range 1x 150­175 mm, 1x 200­225 mm, in wooden boxes
2 Outside micrometers
Outside micrometer, range 1x 150­175 mm, 1x 200­225 mm, in wooden boxes
2 Outside micrometers
Outside micrometer, range 1x 100­125 mm, 1x 125­150 mm, in plastic box
6 Outside micrometers
Outside micrometer, range 25­125 mm
1 Inside micrometer
Etalon, Inside micrometer, range 100­125­150 mm, in wooden box
1 Inside micrometer
Etalon, Inside micrometer, range 100­125­150 mm, in wooden box
1 Measuring head
Renishaw, Measuring head, in wooden box
1 Digital caliper
Mahr, Digital caliper, up to 150 mm
1 Gauge block set
Mitutoyo, Gauge block set
1 Device
Penna Electrica, PE 10, anno di fabbricazione 2006, numero di serie 06/1040, Device
1 Scale
Mettler, PM34­K, Scale, max. 32 kg, d=1g/0.1 g, with trolley
1 Horizontal and vertical measuring device
Horizontal and vertical measuring device
1 Assortment boxes
Lot with 4 assortment boxes, with ducts
2 Plates
Laslo, Plates, dim.approx. 500x350 mm
1 Tool cabinet
Tool cabinet, with 6 drawers, dim.approx. 570x680x870 mm, without contents
1 Work bench
Work bench, dim.approx. 1530x820x880 mm
1 Rack
Rack, dim.approx. 2040x495x760 mm, with Brütsch und Ruegger plate
1 Tool cabinet
Lista, Tool cabinet, with 12 drawers, dim.approx. 565x690x1010 mm, with contents
1 Tool trolley
Stahlwille, Tool trolley
1 Work bench
Work bench, with "Gressel" bench vice, dim.approx. 3010x830x880 mm, with tool cabinet,
with 6 drawers and contents and with rack
1 Work bench
Work bench, dim.approx. 1520x820x880 mm with 2 chairs
1 Plastic boxes
Plastic boxes, with various contents
1 Construction with aluminium panels
Construction with aluminium panels and window, dim.approx. 2x 5100 mm, 1x 5030 mm,
height 2800 mm, with 2 supports with light
2 Measuring device
Mitutoyo, Measuring device
2 Measuring device
Tesa, Measuring device
40,00
40,00
30,00
25,00
50,00
50,00
40,00
20,00
50,00
20,00
25,00
20,00
20,00
10,00
50,00
40,00
30,00
50,00
40,00
40,00
40,00
20,00
100,00
30,00
30,00
Lotto
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
Quantita Descrizione
Prezzo di partenza
6 Outside micrometers
Outside micrometers, f.ex. Tsa and PAV, measuring range 0­50 mm
1 Inside micrometer set
Tesa, Inside micrometer set, 3 parts, measuring range 30­40, 40­50 and 50­60 mm
1 Inside micrometer set
Tesa, Inside micrometer set, 4 parts, measuring range 20­25, 25­30, 30­35 and 35­40 mm
1 Inside micrometer set
Tesa, Inside micrometer set, 3 parts, measuring range 11­14, 14­17 and 17­20 mm
1 Inside micrometer set
Tesa, Inside micrometer set, 4 parts, measuring range 6­8, 8­10, 10­12 and 15­20 mm
1 Depth gauge
Tesa, Depth gauge, measuring range 0­200 mm
3 Outside micrometers
Outside micrometers, measuring range 0­25, 5­25 and 75­100 mm
1 Caliper
Etalon, Caliper, measuring range 0­500 mm
1 Caliper
Oberk, Caliper, measuring range 0­800 mm
1 Caliper
Caliper, measuring range 0­1000 mm
1 Hand lever press
Hand lever press, with cabinet and various contents
1 Tool trolley
Gedore, Tool trolley, with hand tools
1 Granit measuring plate
Granit measuring plate, dim.approx. 1000x630x960 mm, plate height 148 mm
1 Microscope
Hauser, Microscope
1 Tool cabinet
Tool cabinet, dim.approx. 600x500x900 mm, with various Schäublin belongings
1 Tool cabinet
Tool cabinet, with 11 drawers, dim.approx. 565x700x1000 mm, with contents, f.ex.various
pins
1 Screwing device
Miniruo, Screwing device, with belongings
1 Screwing device
Screwing device, with wireless button and mounting
1 Microscope attachment
Microscope attachment
1 3D sensor
Renishaw, SP 2, 3D sensor, in wooden box
1 Deburring plate
Engra, Deburring plate
1 Lot with tongs
Lot with tongs
1 Lot with tongs
Schäublin, Lot with tongs
1 Lot with tongs
Lot with tongs
1 Marking plate
Marking plate, dim.approx. 425x255 mm
1 Gauge block set
Gauge block set, 1.005­100 mm, not complete
30,00
50,00
50,00
50,00
50,00
10,00
20,00
10,00
10,00
10,00
30,00
50,00
50,00
50,00
40,00
50,00
30,00
20,00
10,00
30,00
30,00
20,00
20,00
20,00
20,00
40,00
Lotto
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
137
Quantita Descrizione
Prezzo di partenza
1 Gauge block set
Gauge block set, 1.005­100 mm, complete
1 Gauge block set
Gauge block set, 1.005­100 mm, not complete
1 Gauge block set
Gauge block set, 1.005­100 mm, not complete
1 Micrometer depth gauge
Micrometer depth gauge
2 Drill and mill sets
Drill and mill sets, 1x M3­M10 and 6.3­20.5 mm, as new
1 Lot with drills
Lot with drills
1 Drill set
NTR, Drill set 2.1­10 mm
1 Holder set
Holder set, with wooden box
1 Lot with magnetic stands
Lot with 3 magnetic stands
1 Altimeter
Mahr, Altimeter, with hard granit measuring plate, dim.approx. 400x250 mm
1 Lot with caliper
Lot with digital caliper and depth gauge, measuring range 0­150 and 0­200 mm
1 Digital caliper
Digital caliper, measuring range 0­150 mm
1 Lot with angles
Lot with 2 angles, 4 caliper and various
1 3D sensor
Natho, 3D sensor
1 Lot with dial gauges
Lot with various dial gauges
1 Work bench
Work bench, with "Gressel" bench vice, dim.approx. 1520x820x880 mm, with tool cabinet,
with 6 drawers and contents, f.ex.hand tools, grinding material, etc.
2 Outside micrometers
Tesa, Outside micrometers, measuring range 100­200 and 200­300 mm
1 Lot with measuring pins
Lot with 13 wooden boxes with measuring pins, measuring range 3.51­9.50, 3 pins missing
1 Lot with measuring pins
Mot with 6 wooden boxes with measuring pins, measuring range 1.01­3.50, 4 pins missing
1 Electrical hard metal coater
Tucador, 2000, Electrical hard metal coater
6 Magnetic cube
Magnetic cube
2 Altimeter
Altimeter, measuring range 0­500 and 0­300 mm
1 Work bench
Work bench, dim.approx. 1520x820x880 mm, with tool cabinet, with 7 drawers and
contents, f.ex.tongs, hand tools, grinding material, etc., with material under the work bench
2 Racks
Racks, dim.approx. 2010x530x1135 mm each, with various contents
1 Cross table
Schäublin, Cross table
40,00
40,00
40,00
10,00
10,00
10,00
10,00
10,00
20,00
50,00
30,00
10,00
20,00
30,00
30,00
60,00
30,00
200,00
60,00
25,00
20,00
20,00
60,00
10,00
100,00
Lotto
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
Quantita Descrizione
Prezzo di partenza
1 Cross table
Schäublin, Cross table
1 Cross table
Schäublin, Cross table
1 Frequency converter
Torane, Frequency converter
1 Angle grinder
Einhell, BWS 115/3, Angle grinder
5 Grease presses
Grease presses, as new
1 Wrench set
Wrench set
1 pneum. Screwer
pneum. Screwer
1 Gauge block set
Gauge block set and various
2 Racks
Racks, dim.approx. 1200x395x605 mm
1 Angle grinder
Milwankee, AG11­125x, Angle grinder, 220­240V, 5A, 1100W, n=10000mm­1, Q=125mm,
in plastic box
1 Angle grinder
Milwankee, AG11­125x, Angle grinder, 220­240V, 5A, 1100W, n=10000mm­1, Q=125mm,
in plastic box
1 Angle grinder
Milwankee, AG11­125x, Angle grinder, 220­240V, 5A, 1100W, n=10000mm­1, Q=125mm,
in plastic box
1 Angle grinder
Milwankee, AG11­125x, Angle grinder, 220­240V, 5A, 1100W, n=10000mm­1, Q=125mm,
in plastic box
1 Angle grinder
Milwankee, AG11­125x, Angle grinder, 220­240V, 5A, 1100W, n=10000mm­1, Q=125mm,
in plastic box
1 Angle grinder
Milwankee, AG11­125x, Angle grinder, 220­240V, 5A, 1100W, n=10000mm­1, Q=125mm,
in plastic box
1 Angle grinder
Milwankee, AG11­125x, Angle grinder, 220­240V, 5A, 1100W, n=10000mm­1, Q=125mm,
in plastic box
1 Angle grinder
Milwankee, AG11­125x, Angle grinder, 220­240V, 5A, 1100W, n=10000mm­1, Q=125mm,
in plastic box
1 Angle grinder
Milwankee, AG11­125x, Angle grinder, 220­240V, 5A, 1100W, n=10000mm­1, Q=125mm,
in plastic box
1 Angle grinder
Milwankee, AG11­125x, Angle grinder, 220­240V, 5A, 1100W, n=10000mm­1, Q=125mm,
in plastic box
1 Angle grinder
Milwankee, AG11­125x, Angle grinder, 220­240V, 5A, 1100W, n=10000mm­1, Q=125mm,
in plastic box
1 Angle grinder
Milwankee, AG11­125x, Angle grinder, 220­240V, 5A, 1100W, n=10000mm­1, Q=125mm,
in plastic box
100,00
80,00
20,00
10,00
20,00
10,00
10,00
10,00
10,00
50,00
50,00
50,00
50,00
50,00
50,00
50,00
50,00
50,00
50,00
50,00
50,00
Lotto
159
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
Quantita Descrizione
Prezzo di partenza
1 Rack Rack, dim.approx. 2020x520x1130 mm
1 Machine bench vice
Gressel, Machine bench vice, chuck width 160 mm
1 Machine bench vice
Machine bench vice, chuck width 125 mm
1 Machine bench vice
Machine bench vice, chuck width 100 mm
3 Machine bench vices
Machine bench vices, chuck width 2x80 mm, 1x 65 mm
1 Boring head
Boring head
1 Boring head
Boring head
1 3D sensor
Haff Schneider, 3D sensor
1 Machine head
Machine head
1 Lot with tongs
Lot with tongs
1 Lot with machine parts
Lot with 2 machine parts
1 Metal table
Metal table, dim.approx. 1500x820x880 mm
1 Work bench Work bench with "Gressel" bench vice, dim.approx. 2020x840x880 mm, with tool cabinet,
with 3 drawers and various contents
1 Tool cabinet
Lista, Tool cabinet, with contents, f.ex.tool holders, drills, mills, clamping material, etc.,
dim.approx. 1430x780x1050 mm, suitable for lot 7
1 Table
Allen, TCS 70, Table, turnable, dim.approx. 350x240 mm
1 Lot with tool holders
Lot with 13 tool holders and tools, with trolley, suitable for lot 7
1 Tool cabinet
Tool cabinet, with contents, f.ex.inserts, tongs, hand tools, clamping material, etc.,
dim.approx. 720x530x1010 mm, suitable for lot 8
1 Work bench Work bench, with bench vice and 3 drawers, dim.approx. 1530x760x910 mm, with
contents, f.ex.hand tools
1 Lot with tool holders
Lot with 29 tool holders, tools, suitable for lot 9
1 Lot with tool holders
Lot with 11 tool holders, drills, mills, etc., suitable for lot 8
1 Desk
Desk, dim.approx. 1560x780x760 mm
1 Rack
Rack with machine belongings, dim.approx. 610x400x1010 mm
1 Tool cabinet
Tool cabinet, with contents, f.ex.tool holders, drills, mills, clamping material, etc.,
dim.approx. 730x540x1010 mm, suitable for lot 10
1 Desk
Desk, dim.approx. 1000x600x680 mm
10,00
100,00
75,00
60,00
30,00
25,00
25,00
30,00
25,00
25,00
20,00
20,00
40,00
30,00
30,00
100,00
80,00
40,00
150,00
30,00
10,00
10,00
80,00
5,00
Lotto
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
Quantita Descrizione
Prezzo di partenza
1 Electric device
M. Dreher, 1/VT, numero di serie 2500, Electric device
1 Tool cabinet
Tool cabinet, with 12 drawers, with contents, f.ex.drills, mills, inserts, dim.approx.
620x730x1120 mm
1 Round table
Hauser, Round table, dim.approx. 300 mm
1 Round table
Round table, dim.approx. 300 mm, with mounted machine bench vice, chuck width 120 mm
1 Round table
Round table, dim.approx. 250 mm
1 Round table
Round table, dim.approx. 300 mm
1 Machine bench vice
Machine bench vice, chuck width 150 mm
1 Machine bench vice
Gressel, Machine bench vice, chuck width 100 mm
2 Machine bench vices
Machine bench vices, chuck width 125 and 100 mm
3 Press devices
Press devices
1 Boring head
Boring head, with 3­jaw chuck
1 Swivel
Swivel, system 3R
2 Bench vices
small bench vices
1 3­jaw chuck
3­jaw chuck, diam. 160 mm
1 3­jaw chuck
Reinhauer, 3­jaw chuck, diam. 115 mm
4 Jaw chucks
Jaw chucks, diam. 2x 160 mm, 1x 110 mm, 1x 105 mm
4 Jaw chucks
Jaw chucks, diam. 2x 130 mm, 1x 110 mm, 1x 100 mm
1 Device
Device
2 Magnetic clamping plate
Magnetic clamping plate, diam. 225 and 100 mm
3 Racks
Racks, dim.approx. 2x 1010x510x1010 mm and 2020x510x1125 mm
1 Double grinder
Double grinder, grinding disc diam. 160 mm
2 Box with graphite
Box with graphite
1 Rack with rods
Rack with rods, dim.approx. 2340x900x2100 mm and 2 shelf systems, dim.approx.
2020x530x1580 mm and 2x 1010x530x1010 mm
1 Column drilling machine
Brändle, Column drilling machine
1 Machine angle
Machine angle, dim.approx. 405x225x300 mm
1 Tool cabinet
30,00
50,00
100,00
100,00
25,00
30,00
80,00
60,00
40,00
20,00
25,00
50,00
10,00
30,00
25,00
20,00
20,00
10,00
30,00
10,00
40,00
20,00
50,00
50,00
20,00
60,00
Lotto
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
Quantita Descrizione
Prezzo di partenza
2 Tool cabinets
Tool cabinets, 1x 7 drawers, dim.approx. 720x720x1010 mm and 1x 500x390x1090 mm,
with contents, f.ex, drills, mills, clamping material, etc., suitable for lot 12
1 Lot with tool holders
Lot with 16 tool holders, suitable for lot 12
1 Lot with tool holders
Lot with 13 tool holders, suitable for lot 11, with trolley
1 Tool cabinet
Tool cabinet, with contents, f.ex.tongs, hand tools, clamping material, etc.and 9 tool holders
on the cabinet, suitable for lot 11, dim.approx. 720x530x1020 mm
2 Tool cabinets
Tool cabinets, with contents, dim.approx. 600x510x900 mm
1 Tool cabinet
Tool cabinet, with 10 drawers, without contents, dim.approx. 565x700x1000 mm
1 Tool cabinet
Tool cabinet, with 15 drawers, with contents f.ex.mills, drills, etc., dim.approx.
615x730x1130 mm
1 Tool cabinet
Tool cabinet, wtih 14 drawers, with contents f.ex.reamers, milling blades, hand tools,
clamps, etc., dim.approx. 615x730x1130 mm
1 Tool cabinet
Tool cabinet, with 16 drawers, with contents f.ex.adjusting rings, gauges, punching
numbers, bolts, nuts, etc., dim.approx. 750x850x1150 mm
1 Tool cabinet
Tool cabinet, with 11 drawers, with contents f.ex.reamers, hand tools, tongs, springs, etc.,
dim.approx. 750x850x1150 mm
1 Tool cabinet
Tool cabinet, with 14 drawers, with contents f.ex.screws, nuts, gaskets, etc., dim.apporx.
750x850x1150 mm
1 Round table
Round table, swivelling
1 Marking plate
Marking plate, dim.approx. 450x320 mm
1 High desk
High desk, dim.approx. 600x525x1250 mm
1 Tool cabinet
Tool cabinet, with contents, f.ex.tool holders system 3R, hand tools, etc., suitable for lot 3,
dim.approx. 1430x780x1030 mm
2 Magnetic clamping plates
Komatsu, Magnetic clamping plates, dim.approx. 150x150 and 70x120 mm
1 Metal cabinet
Metal cabinet, dim.approx. 1000x465x1985 mm, with contents, various vertikal eroding
tools
1 Lot with wooden tables
Lot with 3 wooden tables, 2 chairs and rack
1 Tool trolley
Tool trolley, with contents, dim.approx. 570x770x830 mm
1 Crane
Merk, Crane, capacity 1250 kg, with travelling mechanism
1 Electric lift truck
Carreli, Electric lift truck, capacity 1000 kg, lifting height 600 mm, with charger
1 Lift truck
Lift truck
100,00
60,00
80,00
80,00
50,00
40,00
100,00
100,00
80,00
100,00
80,00
50,00
20,00
20,00
100,00
30,00
50,00
10,00
30,00
100,00
100,00
40,00
Lotto
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
Quantita Descrizione
Prezzo di partenza
1 Lot with racks
Lot with 3 racks and transport trolley
1 Metal cabinet
Metal cabinet, dim.approx. 1000x470x1990 mm, with contents, various vertikal eroding
tools
1 Lot with erosion wire
Lot with +/­ 27 rolls erosion wire, f.ex.grip diam. 0.25 mm, cink, brass, etc.
1 Lot with plastic bags
Lot with plastic bags, dim.approx. 220x310 mm
1 Lot with plastic hose
Lot with plastic hose and metal bands
1 Time clock
Bordat, BT200, Time clock
1 Lot with racks
Lot with 2 racks and table, dim.approx. 920x920x800 mm
1 Metal cabinet
Metal cabinet, dim.approx. 1000x400x1950 mm, with contents, various erosion tools
1 Metal cabinet
Metal cabinet, dim.approx. 1000x400x2010 mm, with contents, various erosion tools
1 Metal cabinet
Metal cabinet, dim.approx. 1000x400x1950 mm, with contents, various erosion tools
1 Granit measuring plate
Granit measuring plate, dim.approx. 995x635x140 mm, with frame and "Trinos" altimeter,
type vertical, s/n 5027
1 Lot with tool cabinet
Lot with tool cabinet and 2 racks, with various contents
1 Tool set
Hauser, Tool set, in wooden box
1 Rack
Rack, dim.approx. 1020x520x1010 mm, and plan holder
1 Work bench Work bench with cabinet, dim.approx. 1500x700x850 mm, with contents, various hand
tools
1 Grinding top
Hauser, Grind top, with belongings, in wooden box, suitable for lot 19
1 Tool cabinet
Tool cabinet dim.approx. 720x530x1020 mm and rack, dim.approx. 1020x520x1010 mm,
with contents, various grinding belongings, suitable for lot 19
1 Work bench Work bench, dim.approx. 2070x650x810 mm, with contents of drawers, various grinding
belongings, suitable for lot 20
1 Granit measuring plate
Granit measuring plate, dim.approx. 1000x630x140 mm, with frame and "Mohr" altimeter,
type Digimar
1 Microscope
Hauser, Microscope
1 Heating plate
211­25/26, numero di serie 3209, Heating plate, 200 V, dim.approx. 250x260 mm
1 Magnetic clamping plate
Magnetic clamping plate, turnable, dim.approx. 140x70 mm
1 Rack
Rack, with grinding discs, incl.grinding disc under measuring plate
20,00
50,00
100,00
10,00
20,00
10,00
10,00
50,00
50,00
50,00
200,00
40,00
30,00
10,00
40,00
30,00
40,00
30,00
200,00
30,00
25,00
25,00
20,00
Lotto
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
300
301
302
303
304
Quantita Descrizione
Prezzo di partenza
1 Tool cabinet
Tool cabinet, dim.approx. 1430x530x1010 mm, with contents f.ex.drills, mills, clamping
material, suitable for lot 6
1 Marking plate
Marking plate with altimeter
1 Tool cabinet
Tool cabinet, with 13 drawers, dim.approx. 750x770x1300 mm, with contents f.ex.screws,
pins, etc.
1 Manual lifter
Manual lifter with crank
1 Magnetic lifter
Bux, CM1, numero di serie HM22625, Magnetic lifter, capacity 400 kg
1 Parts cleaning station
Parts cleaning station
1 Pallet rack
Pallet rack with 3 stands, 15 supports, for approx. 18 pallets
1 Metal cabinet
Metal cabinet, with various contents
1 Exhaust system
Montur, Exhaust system and 1 fire extinguisher
1 Floor cleaning machine
Camoc, Electric floor cleaning machine, 220 V
1 Oil collection bin
Oil collection bin, dim.approx. 2400x795x290 mm and barrel with Flectroflux DF
1 Pallet rack
Pallet rack with 2 stands, 3 supports
1 Pantograf
Pantograf, dismantled
2 Machine clamping tables
Machine clamping tables
2 Machine clamping tables
Machine clamping tables
1 Platform trolley
Platform trolley with 2 placement areas
1 Lot with air hoses
Lot with air hoses and guns
1 Injection moulding
Negri Bossi, NB 150/Euromap 1500 H­600, numero di serie 52­887, Injection moulding,
revised 2002, pressing force max. 175 bar, capacity 33 kW, connection 380 V, weight
5260 kg
1 Injection moulding
Aarburg, Allrounder 270­210­500, anno di fabbricazione 1988, numero di serie 141772,
Injection moulding, closing force 500 kNton, capacity heating 5.56 kW, pump motor 15 kW,
voltage 380 V, with "Nastri" outlet conveyor belt type CBM 2
1 Injection moulding
Aarburg, Allrounder 270­210­500, anno di fabbricazione 1998, numero di serie 141770,
Injection moulding, closing force 500 kNton, capacity heating 5.56 kW, pump motor 15 kW,
voltage 380 V, with "Nastri" outlet conveyor belt type CBM 2
1 Heater
HBTherm, HB150PP/6, Heater
1 Ascending conveyor
Crizaf, M02, anno di fabbricazione 2003, Ascending conveyor transport belt, dim.approx.
1800/2100 mm, height approx. 1600 mm, adjustable, width 355 mm
100,00
20,00
100,00
20,00
40,00
40,00
50,00
25,00
25,00
50,00
25,00
10,00
20,00
20,00
20,00
20,00
40,00
4.000,00
1.500,00
1.500,00
80,00
100,00
Lotto
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
Quantita Descrizione
Prezzo di partenza
1 Granulate mill
Mecanoplastic, MG 150 400, numero di serie 43289, Granulate mill
1 Thermo heater
Regloplan, 90smart, anno di fabbricazione 2007, numero di serie 101900480886, Thermo
heater, temperature 90°C
1 Thermo heater
Regloplan, 90smart, anno di fabbricazione 2007, numero di serie 101900480885, Thermo
heater, temperature 90°C
1 Thermo heater
HBTherm, HBO250­6A, Thermo heater
1 Thermo heater
HBTherm, HBO250­6A, Thermo heater
1 Thermo heater
HBTherm, HBO250­6A, Thermo heater
1 Thermo heater
Regloplan, 90smart, anno di fabbricazione 2007, numero di serie 101900480886, Thermo
heater, temperature 90°C
1 Heater
Heater
1 Granulate mill
Plastic Systems, GSL18/18, anno di fabbricazione 2008, numero di serie G014­08,
Granulate mill, weight approx. 130 kg, motor defect
1 Granulate mill
Plastic Systems, GSL18/18, anno di fabbricazione 2008, numero di serie G013­08,
Granulate mill, weight approx. 130 kg
1 Granulate mill
Plastic Systems, GSL18/18, anno di fabbricazione 2008, numero di serie G011­08,
Granulate mill, weight approx. 130 kg
1 Hopper loader
Moretto, anno di fabbricazione 2008, numero di serie 08­00171, Hopper loader
1 Granulate dryer
Moretto, D4T, anno di fabbricazione 2007, numero di serie 07­12868, Granulate dryer,
dehumidifying, capacity 2 kW, weight 58.5 kg
1 Transport device
MB, FSRV, anno di fabbricazione 2000, Transport device
1 Transport device
MB, FSRV, anno di fabbricazione 2000, Transport device
1 Device
Econe, 60, numero di serie 179907, Device, connection 3x 400 V, 6 A
1 Granulate mill
Meccanoplastic, MF1412, anno di fabbricazione 1999, numero di serie 19989, Granulate
mill
1 Granulate dryer
Moretto, DH60/D101MT, anno di fabbricazione 1999, numero di serie 991102, Granulate
dryer, connection 230 V, 2100 Watt
1 Vacuum pump
511D, Vacuum pump, capacity 1.1 kW, 53 m3/h, Vac max. 95%
1 Pressure tank
NTR, Pressure tank
1 Coiler
Soprem, ST12, numero di serie 178812, Coiler, diam. 900/1270 mm
1 Scale
Scale, max. 50 kg
50,00
80,00
80,00
80,00
80,00
80,00
80,00
30,00
40,00
250,00
250,00
100,00
200,00
50,00
50,00
200,00
100,00
250,00
75,00
20,00
100,00
10,00
Lotto
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
Quantita Descrizione
Prezzo di partenza
1 Welding trolley
Aulogen, Welding trolley
1 Exhaust system
Exhaust system
1 Platform trolley
HT8.11, numero di serie 19597, Platform trolley, capacity 1000 kg, height adjustable
1 Bandsaw
Mössner, SM/420, numero di serie 20472, Bandsaw
2 Automats
Automats, defect
2 Pallet with folding carton
Pallet with folding carton
1 Pallet rack
Pallet rack with 4 stands, 4 supports for 12 pallets
1 Lot with plastic granulate
Lot with various plastic granulate and semi finished products on approx. 35 pallets
1 Pallet rack
Pallet rack with 12 stands, 26 supports for approx. 40 pallets
1 Lot with injection moulding forms
Lot with +/­ 5000 kg injection moulding forms on approx. 20 pallets
1 Electric stacker
Fiat, E15N, Electric stacker, capacity 1500 kg, lifting height 3600 mm, working hours
16176, with charger, battery empty
1 Double grinder
Pestallozi, WSD65, Double grinder
1 Pallet rack
Pallet rack with 4 stands, 18 supports for 12 pallets
1 Pallet rack
Pallet rack with 3 stands, 10 supports for 15 pallets
1 Pallet rack
Pallet rack with 4 stand, 10 supports for 20 pallets
1 Round grinding machine
Numeka, Round grinding machine, not complete
3 Plastic boxes
Plastic boxes with cover, dim.approx. 1210x1010x800 mm
3 Pallet with folding carton
Pallet with folding carton
1 Lot with barrier grids
Lot with 14 barrier grids, some dismantled
1 Hand pallet truck
Hand pallet truck, capacity 2000 kg
1 Industrial vacuum cleaner
Energy, Industrial vacuum cleaner and vacuum cleaner
2 Plastic transport trolley
Plastic transport trolley
1 Platform trolley
Platform trolley, dim.approx. 1150x700x900 mm
1 Platform trolley
Platform trolley, dim.approx. 970x500x900 mm
1 Tool cabinet
Tool cabinet, with contents, dim.approx. 500x380x1090 mm
1 Temperature control device
PSG, HR06, numero di serie 410502528, Temperature control device
10,00
10,00
50,00
80,00
50,00
20,00
20,00
50,00
150,00
200,00
500,00
30,00
50,00
50,00
100,00
200,00
60,00
30,00
50,00
30,00
20,00
10,00
20,00
10,00
10,00
50,00
Lotto
353
354
355
356
357
358
359
360
361
362
363
364
365
366
370
371
372
373
374
375
376
377
378
379
380
Quantita Descrizione
Prezzo di partenza
1 Temperature control device
Temperature control device
1 Control device
Hasco, Control device
2 Gas welding hoses
Gas welding hoses with "Gloor" control valve
1 Work bench
Work bench with "Gressel" bench vice, 3 drawers with contents, dim.approx.
3000x840x900 mm
1 Press Pneumatic press, with table
1 Lot with racks
Lot with 2 racks, with contents, f.ex.various hoses, connections, oils, etc.
1 Press
Bruderer, 65T30, numero di serie 3787/4, Press, with control
1 Frame
Frame, movable, for bigbags, dim.approx. 1570x1500x3007 mm
1 Rack
Rack with contents
1 Cooling device
Thermogamma, WG40a TPS, numero di serie 019807, Cooling device, cooling liquid
R134a, capacity 4.07 kW
1 Control box
Control box for 380 V
1 Compressor
Sutto, SMT10, Compressor, 16521 working hours, with air dryer and wind vessel
1 Lot with system parts
Lot with various system parts, dismantled
5 Plastic vessel
Green plastic vessel
1 Lot with tables
Lot with 6 tables, 17 chairs and 2 refrigerators
1 Washing machine
Sibir, WA850, Washing machine
1 Lot with wardrobes
Lot with 28 wardrobes and small cabinet
1 Lot with racks
Lot with racks and various, complete room content
1 Lot with racks
Lot with racks and various, complete room content
1 3D measuring machine
Tesa, Micro MS343, 3D measuring machine
1 Meeting table
Meeting table, dim.approx. 3200x1000x770 mm and 7 chairs
1 Lot with exhibition furniture
Lot with 8 exhibition cabinets, magnetic board and desk
1 Lot with desk
Lot with desc, chair, etc., complete room content
1 Rack
Rack, dim.approx. 2010x500x1505 mm
1 Climatisation
Profile Plus, Climatisation
30,00
30,00
20,00
40,00
10,00
20,00
50,00
50,00
10,00
200,00
20,00
250,00
50,00
20,00
10,00
25,00
20,00
10,00
10,00
100,00
50,00
40,00
10,00
10,00
10,00
Lotto
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
400
401
402
Quantita Descrizione
Prezzo di partenza
1 Lot with office furniture
Lot with office furniture, consisting of wall cabinet, dim.approx. 2000x475x1840 mm, 1
filling cabinet, dim.approx. 1590x500x1135 mm, desk, 4 chairs and small furnitures
1 PC
PC, with screen, keyboard, mouse and "HP" printer
1 Copy machine
Toshiba, 2860, Copy machine, with 3 infeeds, 2 drawers
1 Fax machine
Canon, Fax machine
1 Lot with metal cabinet
Lot with metal cabinet, dim.approx. 1200x400x2000 mm, with rack and small table
1 Lot with office furniture
Lot with office furniture, consisting of 3 desks, 4 cabinets, 2 chairs
1 PC
PC, with screen, keyboard, and "HP" printer
1 Meeting table
Meeting table, dim.approx. 1100x1100x730 mm and 4 chairs
1 Desk
Desk, dim.approx. 2450x1280x730 mm, with rack, dim.approx. 1160x530x570 mm and
filing rack, dim.approx. 2200x560x700 mm
2 Racks
Racks, dim.approx. 870x370x1870 mm
1 Plotter
Océ, 5120, Plotter, paper width approx. 900 mm
1 PC
PC, with screen, keyboard and printer
1 Lot with PCs
Lot with 2 PCs, screens and 1 printer
1 Lot with office furniture
Lot with office furniture, consisting of 2 desks, 2 racks, cabinet and barrier band
1 Lot with office furniture
Lot with office furniture, f.ex. 4 desks, various tables and racks
1 Laptop
Medion, Laptop, with "HP" scanner and printer
1 Climatisation
Suntech, Climatisation
1 Lot with office furniture
Lot with office furniture, f.ex. 3 tables, 2 racks, planing board, drawing cabinet, etc.
1 Conventionel lathe
Ernault, HN 400, numero di serie 12803, Conventionel lathe (Location 8810 Horgen
1 Line drilling machine
Wörner, B 13, numero di serie 28061, 6 fold line drilling machine (Location 8810 Horgen)
1 Conventionel lathe
Oerlikon, KDWG n 34C/3 PS, numero di serie 266303, Conventionel lathe (location 8810
Horgen)
30,00
10,00
50,00
10,00
20,00
10,00
10,00
40,00
50,00
10,00
50,00
10,00
10,00
10,00
5,00
20,00
20,00
5,00
300,00
250,00
200,00
Condizioni Generali Asta on­line TroostwijkAuctions.com
Article 1. Definitions
General Terms
and
Conditions of
Use:
General Online
Auction
Terms and
Conditions:
User:
User contract:
Bidder:
Bid:
Purchase price:
Purchase
contract:
Buyer:
Lot:
(Online) Auction:
Registration:
Specific Online
Auction
Terms and
Conditions:
Troostwijk:
Seller:
Website:
Knock­down:
The general terms and conditions which regulate the use of the Website of Troostwijk Veilingen
B.V.
The present General Terms and Conditions, which define the stipulations of an auction
A person who registers on the Website of Troostwijk Veilingen B.V.
The contract between Troostwijk Veilingen B.V. and the user
A person who submits a bid at an online auction
Each binding amount offered for an item in the auction by the user
Composed of the highest bid at the end of the auction, the surcharge and possibly incurring
VAT.
Contract between the buyer and the seller which results from the adjudication by Troostwijk
Bidder who receives the knock­down for the item
Item(s), which is/are auctioned (combination = several items offered under one lot number)
The auction of movable goods organised by Troostwijk on the website of Troostwijk Veilingen B.V.
Registration of the user on the website of Troostwijk Veilingen B.V., whereby the registration form on the website must be
completely filled out
Special requirements for a specific auction
Troostwijk plc, Zurich
The person or persons who commission the auction of a lot
The website www.TroostwijkAuctions.com, which is maintained by Troostwijk Veilingen B.V. in Amsterdam and which is the
platform for auctions carried out by Troostwijk
Confirmation by Troostwijk that the highest bidder wins the bid for an lot or combination by payment of the purchase price.
Article 2. General Terms and Conditions
2.1 Troostwijk auctions take place on the website of Troostwijk Veilingen B.V., which provides the platform for auctions. The website is used by
the user according to the General Terms and Conditions of Troostwijk Veilingen B.V.
2.2 The General Online Auction Terms and Conditions contain the general regulations for the auction. The auction takes place solely on the basis
of these terms and conditions, which are accepted by participation at the auction. At an auction, Specific Online Auction Terms and Conditions
may also apply. These contain amendments or deviations to the General Online Auction Terms and Conditions. The Specific Online Auction
Terms and Conditions shall have precedence.
2.3 Troostwijk can amend these General Online Auction Terms and Conditions. Amendments shall enter into force upon receipt of a
corresponding notification by users and bidders.
Article 3. Registration
3.1 Only bidders who have registered as users with Troostwijk Veilingen B.V. and who have accepted the General Terms and Conditions of Use
can participate at auctions.
3.2 Only persons who have accepted the General Online Auction Terms and Conditions and the Specific Online Auction Terms and Conditions for
an auction may submit a bid.
Article 4. Auction
www.TroostwijkAuctions.com
4.1. An auction can take place on behalf of the Seller and on his own account. Troostwijk is not a contractual party of a purchase contract which
results from a knock­down, but merely the agent of such a purchase contract.
4.2 Deadlines, such as the start and end of an auction, are contained in the Specific Online Auction Terms and Conditions.
4.3 The organisation, preparation and execution of the Auction are Troostwijk’s business.
4.4 Troostwijk is authorized:
­ to refuse the knock­down in general or—for important reasons—to specific Bidders;
­ to exclude Bidders from an auction;
­ to rectify mistakes made by Troostwijk for bids and/or knock­downs by a corresponding notification of the Bidder;
­ to undertake other necessary measures;
4.5 The ruling of Troostwijk regarding what has taken place at an auction is binding.
Article 5. Cancellation, Technical Disturbances
5.1 Troostwijk reserves the right to cancel, prematurely terminate or extend an Auction on good cause shown. In cases of a technical disturbance
of the Website, or should it not be entirely accessible to some or all Users, Troostwijk has the right to prolong the Auction by up to 24 hours.
Troostwijk and/or the seller can reject bids without stating the reasons. Troostwijk and the Seller are entitled to place bids.
5.2 The User declares with his registration that he is aware of the particular circumstances of an Internet auction. He furthermore declares that he
is particularly aware of the fact that, according to the present status of technology, technical disturbances and breakdowns can occur which can
make access to the Internet auction and the Website either difficult or even impossible.
5.3 Troostwijk is only liable for the orderly execution of the auction on the Website of www.Troostwijkauctions.com, but not for technical
disturbances. The liability of Troostwijk is limited to and complies with the General Terms and Conditions for Online Auctions as outlined in
Article 15.
Article 6. Viewing; Entry to Buildings and Premises
6.1 Dates for viewing appointments are listed in the Specific Online Auction Terms and Conditions.
6.2 Entry to buildings and premises is at a person’s own risk. Instructions by Troostwijk or any persons appointed by them must be followed.
Neither the Seller nor Troostwijk shall accept any liability for damages which have occurred as a result of entry to buildings and premises. In
any other case, the limits to liability contained in Article 15 of the General Online Auction Terms and Conditions for Troostwijk and the Seller
shall apply.
Article 7. Lots
7.1 Individual Lots or Combinations shall be auctioned.
7.2 Combinations, the simultaneous auction of several Lots, shall be indicated in the system.
In the case of Combinations, the auction shall be carried out in two steps:
a) First, the individual Lots shall be submitted to auction. The Knock­down shall take place subject to the prior condition that the Lot is not
being adjudicated as part of a Combination. Bidding for the Combinations shall begin after the Knock­down for the individual Lots. If no bids
are made for the Combination, the Lots shall be auctioned individually.
b) Insofar as bids are made for Combinations, the following shall apply:
The Knock­down shall be awarded for the Combination when the highest bid which can be made for a knock­down of the Combination is
higher than the sum of the bids for the individual Lots. The Knock­down for the individual Lots is then considered as not effected due to lack of
condition precedent.
7.3 Troostwijk has the right to assemble different objects into Lots, divide Lots and/or remove them from the auction.
7.4 Troostwijk has the right to request a normal banking security from the Bidder in advance to back certain Lots.
Article 8. Bids
8.1 A Bidder can submit Bids for auctions for which he is registered. Bidders can submit bids for one or several lots. Bids can only be made if they
are free of reserve and conditions. Bids are binding and cannot be retracted. The Bidder shall receive a confirmation by e­mail for every bid
submitted and overbid by a third party. This notification does not constitute the knock­down.
8.2 Bids can be submitted as static bids or proxy bids.
(a) static bid: The user bids a fixed amount for each Lot indicated in the system.
(b) proxy bid: the user indicates the highest price he is willing to pay for a Lot. The proxy bid is not displayed in the system. Should a third party
www.TroostwijkAuctions.com
overbid the user, the current offer shall be increased by increments until a third party overbids the proxy bid. During this time, a proxy bid can
only be ceased by the user if he submits a static bid which constitutes the highest bid at that moment.
8.3 VAT and surcharge are not included in the bids. The amount of the surcharge results from the Special Online Auction Terms and Conditions.
8.4 Troostwijk and/or the seller have the right to refuse bids without giving a reason. Troostwijk has the right to submit bids on behalf of third
parties.
Article 9. Award & Contract of sale
9.1 A purchase contract for one or several Lots is concluded only after the Knock­down. The Buyer shall be notified by e­mail about the resulting
purchase contract (knock­down). The Knock­down shall take place at the latest two working days after the end of the auction.
9.2 Troostwijk has the right to make no Knock­down or to grant one subject to condition precedent.
9.3 As a rule, the User who has made the highest bid shall receive the Knock­down. The Knock­down takes place if no other bid is made 10
minutes prior to the end of the auction. Should a further bid be submitted, the auction shall end upon the submission of the highest bid which is
not overbid within 5 minutes.
Article 10. Transfer of risk/Transfer of title
10.1 The risk of accidental loss of the objects purchased at auction as well as risk of loss or damage by fire, theft or burglary shall transfer to the
buyer after the knock­down.
10.2 Title shall be transferred to the buyer only after payment in full has been effected.
Article 11. Buyer’s Obligations
11.1 The buyer is obligated to pay the purchase price in addition to the mandatory sales tax and the surcharge as well as to collect the lot(s) when
the knock­down has occurred.
11.2 Payment must be effected to an account indicated by Troostwijk in the specified currency within three working days after the knock­down.
11.3 The statutory default interest shall be charged in the case of delayed payment. The seller’s rights shall comply with
the legal requirements.
11.4 Should the buyer not fulfil an obligation, particularly if:
(i) the purchase price is not paid in due time or not paid completely
(ii) the Lots are not collected in due time, and/or
(iii) the information required for delivery is not procured,
then it shall automatically be considered as default, without any further notice of default being required. Troostwijk shall then have the right to
cancel the purchase contract on behalf of the seller. In this case, Troostwijk is free to reassign the Lots to another Bidder, and Troostwijk
and/or the seller shall not be liable for damages.
11.5 In the event of a cancellation, the buyer shall be liable for payment of damages which ensue therefrom.
Article 12. Collection
12.1 The Buyer is only authorized and bound to the dates and times listed in the Specific Online Auction Terms and Conditions for the collection of
items. For technical reasons, Troostwijk can determine that a particular Lot can be collected only after the delivery of other Lots.
12.2 The Buyer whose Lot(s) hinder/s the collection of other lots is obligated to see to the collection of those lots without delay after being notified
by Troostwijk by email and/or a message of the address supplied by the Buyer. Should this not occur, then Troostwijk shall have the right to
undertake the collection and possible storage of the items by third parties on the buyer’s risk and expense.
12.3 The Buyer is obligated to carefully disassemble, reassemble and collect his Lots. He shall be liable for damages which ensue to the property
of third parties in connection with the assembly and collection. Furthermore, he is obligated to protect Troostwijk and the Seller from any
claims by third parties which result from the dismantling, reassembly and/or collection of his Lots.
12.4 The Buyer is obligated to follow the instructions of Troostwijk and/or any persons mandated by Troostwijk for the dismantling, reassembly and
collection of his Lots.
12.5 The Buyer is obligated to ensure that he or the person(s) who take care of dismantling, assembly or transport shall be in possession of the
necessary authorizations. Neither Troostwijk or the Seller can be held liable for the lack of necessary authorizations and/or that the official
requirements are not upheld during dismantling, reassembly and collection.
12.6 In cases when it is necessary to dismantle buildings (in pieces) in order to remove the allotted Lots, prior consultation as well as written
agreement by Troostwijk are required, and the conditions set down by Troostwijk for awarding of the knock­down must be respected.
www.TroostwijkAuctions.com
12.7 Troostwijk reserves the right to request a deposit prior to collection of Lots in order to cover possible damages. The Buyer shall be notified of
the Lots concerned and the amount of the deposit. The deposit shall be refunded to the Buyer after safe collection without any damage.
Article 13: Liability/Warranty of Troostwijk
Troostwijk shall only be liable for the preparation and carrying out of the auction according to the legal stipulations. In addition, the following shall
apply:
13.1 Claims by the Seller, the Bidder or the Buyer for neglect of duty shall be excluded, particularly for any advice regarding appraisals or flaws of
the Items.
13.2 The descriptions of the Items by Troostwijk, e.g. in the sales catalogue or in any listing, are based on the information supplied by the Seller.
Troostwijk shall only be liable for the correct transmission of this information, but not for its objective accuracy.
13.3 Details indicated by Troostwijk are only for the purpose of distinguishability and do not constitute any kind of guarantee.
13.4 The Items are used. Troostwijk shall not assume any guarantee for material flaws and defects of title and shall not be liable for the amount,
quality, measurements, year of construction or completeness.
13.5 The above restrictions shall not apply if Troostwijk acts intentionally or with gross negligence, is in breach of a fundamental contract
requirement or if bodily harm occurs.
Article 14: Liability/Warranty of Seller
The Seller is liable to the Buyer for defects of the items in compliance with the following stipulations:
14.1 The Buyer has had the opportunity to view the items in advance. The sale shall take place as viewed and excluding all warranties for defects
and title. The sale has taken place, particularly without guarantee for visible or latent defects or guarantee regarding completeness, number,
effect, utility, usability, saleability, the presence or absence of rights or claims of third parties and/or the transferability to third parties.
14.2 The Seller excludes liability for a particular characteristic or for common use of the items.
14.3 The Seller excludes all liability for publicity statements of the manufacturer.
14.4 The above restrictions shall not apply if the Seller has intentionally misrepresented any defects to the Buyer, breached a fundamental
contractual obligation or if any bodily harm occurs.
Article 15. Limitation of Liability Troostwijk/Seller
15.1 The limitation of liability is valid for Troostwijk and the Seller as well as for their legal representatives, managerial employees and auxiliary
helpers.
15.2 Liability shall only exist in the case of malicious intent or gross negligence.
15.3 Liability shall exist for collateral damage, particularly for lost profit, only in cases of intent or gross negligence.
15.4 The liability shall be restricted to the amount of typically foreseeable damages at conclusion of the contract, insofar as there is no case of
intent or gross negligence.
15.5 The above­mentioned restrictions do not apply in cases of breach of a contractual obligation, acceptance of an explicitly stated guarantee as
well as damages resulting from bodily harm, harm to health and obligatory legal regulations.
Article 16. Severability Clause/Written Form
16.1 Should any of the provisions of these General Online Auction Terms and Conditions become completely or partly invalid, void or not
enforceable, it shall have no effect on the other provisions of the General Online Auction Terms and Conditions. The invalid, void or not
enforceable provision shall be replaced by a valid and enforceable provision which comes closest to fulfilling the parties’ economic goals
which were originally intended by the invalid, void or not enforceable provision.
16.2 Modifications and amendments of these General Online Auction Terms and Conditions shall only be effective upon written agreement by the
parties.
Article 17. Applicable Law/Court of Jurisdiction
17.1 The General Online Auction Terms and Conditions and the obligations ensuing therefrom are subject to Swiss law. The UN Convention on
Contracts for the International Sale of Goods (CISG) shall explicitly not apply.
17.2 The exclusive court of jurisdiction for all disputes arising in connection with the auction shall be the court of Zurich (Canton of Zurich). The
www.TroostwijkAuctions.com
General Terms and Conditions The General Terms and Conditions shall apply for disputes with the seller.
www.TroostwijkAuctions.com
Circa Troostwijk
Lo sapevate?
­ organizziamo aste in 23 paesi
­ abbiamo fino a 1,5 milioni di page views al giorno
700 Aste
Statistiche
Troostwijk realizza
oltre 700 aste all’anno
in tutta Europa ­ 50.000 partecipanti
­ da 89 paesi diversi
­ oltre 350.000 registrazioni al sito 15 Paesi
80 Anni
Troostwijk ha
propri uffici in 15 paesi Europei
Troostwijk realizza
aste dal 1930 e
ha oltre 80 anni di esperienza
www.TroostwijkAuctions.com