See the document as PDF
Transcript
See the document as PDF
CERTIFICATE Issued to: Applicant: Manufacturer/Licensee: AB trasformatori S.r.l Via Piantada 6 25036 Palazzolo S/O (BS), Italy AB trasformatori S.r.l Via Piantada 6 25036 Palazzolo S/O (BS), Italy Product(s) : Safety Isolating Transformers, single-phase, general purpose Trade name(s) Type(s)/model(s) : : AB trasformatori TMUL Series The product and any acceptable variation thereto is specified in the Annex to this certificate and the documents therein referred to. DEKRA hereby declares that the above-mentioned product has been certified on the basis of: a type test according to the standard : EN 61558-1:2005 + A1:2009, EN 61558-2-4:2009 an inspection of the production location according to CENELEC Operational Document CIG 021 a certification agreement with the number 3503970 DEKRA hereby grants the right to use the ENEC KEMA-KEUR certification mark. The ENEC KEMA-KEUR certification mark may be applied to the product as specified in this certificate for the duration of the ENEC KEMA-KEUR certification agreement and under the conditions of the ENEC KEMA-KEUR certification agreement. This certificate is issued on: March 9, 2015 and expires upon withdrawal of one of the above mentioned standards. Certificate number: 3503970.02 DEKRA Certification B.V. drs. G.J. Zoetbrood Managing Director Massimiliano Triulzi Certification Manager © Integral publication of this certificate is allowed All testing, inspection, auditing and certification activities of the former KEMA Quality are an integral part of the DEKRA Certification Group. ACCREDITED BY THE DUTCH COUNCIL FOR ACCREDITATION DEKRA Certification B.V. Meander 1051, 6825 MJ Arnhem P.O. Box 5185, 6802 ED Arnhem The Netherlands T +31 88 96 83000 F +31 88 96 83100 www.dekra-certification.com Registered Arnhem 09085396 APPENDIX 1 TO ENEC KEMA-KEUR CERTIFICATE 3503970.02 page 1 of 4 SPECIFICATION OF THE CERTIFIED PRODUCT Product data Product : Safety Isolating Transformers, single-phase, general purpose, open skeleton, Trade name : AB trasformatori Type/s or series : TMUL Series Nature of supply : Alternate current, single phase Rated frequency : 50-60 Hz Rated primary voltage : 600 V~ maximum Rated power : from 20 VA up to 3500 VA Rated secondary voltage : from 10 V~ up to 600 V~ Class : N.A. (for building-in) Protection degree : IP 00 (open skeleton) Insulation class : B Rated ambient temperature : 40 C : Non-short-circuit-proof safety isolating transformer. External fuse(s), not provided with the transformers. Time Delay (T), value marked on the rating plate. Fuse(s) in series with secondary winding. : employing the core of the EI shape, maximum 2 Primary Input Windings, maximum 3 Secondary Outputs Windings, earthed protective screen construction allowed, tapped windings construction allowed (6 maximum primary and 6 maximum secondary) Classification Other characteristics Nomenclature: TMUL /XXX /XXX 1 2 3 1= Basic product type. Always TMUL. 2= Designates the Output Power (related to core dimensions), VA, 3= Designates commercial code (not safety relevant). They can be up to three alphanumeric characters (“/” is not considered as alphanumeric character DEKRA Certification B.V. Meander 1051, 6825 MJ Arnhem P.O. Box 5185, 6802 ED Arnhem The Netherlands T +31 88 96 83000 F +31 88 96 83100 www.dekra-certification.com Registered Arnhem 09085396 APPENDIX 1 TO ENEC KEMA-KEUR CERTIFICATE 3503970.02 page 2 of 4 TESTS Test requirements EN 61558-1:2005 + A1: 2009, EN 61558-2-4:2009 Test result The test results are laid down in DEKRA Test Report No. 3503970.51. Conclusions The examination proved that all test requirements were met. Tested by : Filippo Tiezzi Checked by : Franco Vasta Factory Location: AB trasformatori S.r.l Via Piantada 6 25036 Palazzolo S/O (BS), Italy DEKRA Certification B.V. Meander 1051, 6825 MJ Arnhem P.O. Box 5185, 6802 ED Arnhem The Netherlands T +31 88 96 83000 F +31 88 96 83100 www.dekra-certification.com Registered Arnhem 09085396 APPENDIX 1 TO ENEC KEMA-KEUR CERTIFICATE 3503970.02 page 3 of 4 List of Critical Components Componente Produttore Modello Certificazione Component Manufacturer Model Approval marks Rocchetto Bobbin E.I. Dupont Alternativa (Alternative) CIERRE Alternativa (Alternative) CIERRE Alternativa (Alternative) DSM Filo smaltato Rame Copper Wire Various Materiali Isolanti (Interwinding Insulation) FAET Electrical grade paper, material designation “FAETISO F2 NM”, min. 0,25 mm thickness UL (E221010) Alternativa (Alternative) FAET UL (E221010) Alternativa (Alternative) POLIFIBRA SPA Alternativa (Alternative) SYNFLEX ELEKTRO GMBH & CO. COVEME Electrical grade paper, material designation “FAETISO B2 DMD”, min. 0,18 mm thickness Electrical grade paper, material designation “POLIMEX NM F2 S190”, min. 0,25 mm. thickness. Electrical grade paper, material designation “SYNFLEX VPV”, min. 0,18 mm. thickness. Electrical grade paper, material designation “DYFLEX IDF75”, min. 0,18 mm. thickness. UL (E209645) Alternativa (Alternative) Manufacturer Rynite FR530 or FR530L, 30% fiberglass reinforced, modified polyethylene resin, flame class V-0 @ 0,35 mm. RP6, Raw material Polyamide 6 (PA6), LATAMID 6 H2, supplier LATI, flame class HB @ (0,75-3,0) mm. RP7, Raw material ARNITE, supplier DSM, flame class V-2 @ 0,71 mm., V-0 @ (1,5-3,0) mm. Akulon K244-HG6, Polyamide, fiberglass, flame class 94V-0 @ 0,875mm. UL (E41938) UL (E54080) UL (E47960) UL (E47960) MW35C, MW36C, MW73C, MW79, MW82C, insulation Class B (130 °C) minimum, various diameters UL (E194086) UL (E301715) Alternativa (Alternative) E I DUPONT Electrical grade paper, material designation “MYLAR”, min. 0,125 mm. thickness. Guaine (Sleeving) FAET Material designation “FAETUBE HES4” or “FAETUBE HES25” UL (E221010) Alternativa (Alternative) FAVIER Material designation “SCS 4 KV” UL (E194299) FAET Material designation “FAETAPE B1” UL (E221010) VONROL Material designation “ISOTAPE 51044” Nastro di fissaggio Adhesive Tape Alternativa (Alternative) DEKRA Certification B.V. Meander 1051, 6825 MJ Arnhem P.O. Box 5185, 6802 ED Arnhem The Netherlands T +31 88 96 83000 F +31 88 96 83100 www.dekra-certification.com Registered Arnhem 09085396 APPENDIX 1 TO ENEC KEMA-KEUR CERTIFICATE 3503970.02 page 4 of 4 TMUL Series DEKRA Certification B.V. Meander 1051, 6825 MJ Arnhem P.O. Box 5185, 6802 ED Arnhem The Netherlands T +31 88 96 83000 F +31 88 96 83100 www.dekra-certification.com Registered Arnhem 09085396