Solo SLM, noise measurements for all
Transcript
Solo SLM, noise measurements for all
O N GO V ING INNO Solo SLM Solo SLM, noise measurements for all A T I ON Solo SLM, the first instrument in 01dB’s range of sound level meters, exhibits outstanding performances. Designed for multiple applications, Solo SLM’s ergonomics ensures easy use that has proved a tremendous success with all users. This simplicity brings flexibility, speed and timesavings to all operations. Solo SLM can be used to measure Leq equivalent continuous levels, Lp pressure levels or Lpk peak levels, as defined in the different acoustic regulations. Data are stored in a non-volatile memory and can be further read or directly printed. For measurements performed in a quiet atmosphere, Solo SLM allows for measurements of noise levels as low as 30 dB. As an option, an octave band frequency analysis module is available for signal assessment. Solo SLM, a precision data-logging sound level meter for all applications Precision metrology ◗ Compliant with new standard IEC 61672-1 ◗ Class 1 or class 2 ◗ Real-time 1/1 and 1/3 octave frequency analysis Compact instrument, unrivalled performances ◗ Single dynamic range: 110 dB ◗ Parallel measurement of all indicators ◗ Operating lifetime: 24 hours Associated services ◗ Users training ◗ Laboratory calibration ◗ Customized maintenance contract Because of its large backlit screen and ergonomic screen, one can get the feel for Solo SLM very rapidly and intuitively. Solo SLM is the ideal tool for all technicians looking for versatility and simplicity. Enhance your know-how ◗ in control measurements ◗ in industrial acoustics ◗ in selective data collections ◗ in research and education Solo SLM Technical Specifications Standards Metrology Solo SLM CEI 61672-1 (2002) / NF EN 60651 (2000) / NF EN 60804 (2000) CEI 1260 (1995) / ANSI 1.11 / ANSI 1.4 CEM / EMC EN 50081-1 and 2 / EN 50082-1 and 2 / CEI / IEC 61000 Single dynamic range: 30-137 dB(A) in class 1 and class 2 Weighting: A, B, C and Z Leq/Lp, Lpmin, Lpmax (S, F, I) / Lpk (C, Z) Short Leq with time step from 1 to 60 s LAE, Leq start/stop up to 24 hours Switchable 0.3 / 10 Hz high-pass filter BackErase mode: Erasing of the last 10 s of signal Underload and overload indicators Input / Output AC/DC output RS232 output for Kyoline-type serial printer Real-time frequency analysis (option) 1s average 1/1 or 1/3 octave (from 12.5 Hz to 20 kHz ) Average 1/1 or 1/3 octave in Lp (F, S) Performances Standard accessories Optional accessories 01dB-Metravib 200, Chemin des Ormeaux F-69578 Limonest Cedex Tel.: +33 (0)4 72 52 48 00 Fax.: +33 (0)4 72 52 47 47 [email protected] www.01db.com Parallel measurement of Leq, Lp and Lpk (1 time weighting) with possible selection of 2 different frequency weightings Storage of 99 sets of results Backlit screen and keyboard 24-hour operating life Rechargeable battery, non volatile memory Ergonomic page display Language: French, English, Spanish, German, Italian, Portuguese Preamplifier PRE21S Microphone: ½”, 50 mV/Pa, class1 or 20 mV/Pa, class 2 Windscreen Integrated battery and mains power supply Fully equipped carrying case Carrying pouch External battery charger and additional battery(ies) Calibrator CAL21 (class 1) or CAL02 (class 2) Serial printer Microphone extension cable The presented characteristics are subject to change without notice. Version March 2007 Features