Salon de l`Emballage: MG2 and its GTF60 preview
Transcript
Salon de l`Emballage: MG2 and its GTF60 preview
Newsletter 7 - October 2012 Salon de l’Emballage: MG2 and its GTF60 preview At the Parisian exhibition, MG2 will present a big novelty: GTF60, a forming/filling/closing machine for displays, cardboard boxes and trays. It is a machine which can be employed in the pharmaceutical, cosmetic and food sectors. MG2 has always been bound to concepts like flexibility and innovation. Today, the Bolognese Company is working full time to develop advanced solutions with a high customization level, suitable to be employed in other fields different from the pharmaceutical sector, which represents the traditional core business. GTF60 was born by following these concepts: a very innovative machine which will be presented at Emballage (Hall 5a – Stand F002). It is a forming/filling/closing machine, fully electronic, featuring great flexibility and excellent production performances. Technical features. GTF60 employs brushless motors, ensuring precise functioning and high performances; the machine offers a very wide size range, as it can handle boxes (including lid) from 90 x 40 x40 mm (minimum) up to 300 x 300 x 150 mm (maximum). Confirming the high flexibility of GTF60, it is possible to use different kinds of pressboard or line boards. The box can be At Emballage 2012, absolute preview for GTF60 MG2 S.r.l. – Via del Savena, 18 – 40065 Pian di Macina di Pianoro (BO) Italy Tel. +39 051 4694111 Fax +39 051 4694199 [email protected] - www.mg2.it Page 1 closed by mobile folders or glue-sealed, even on three sides. The machine can reach a production speed up to 60 cycles/minute, depending on box size and type of product feeding system. The balcony design guarantees the complete accessibility on each side, in order to optimize cleaning and functioning operations. The use of chainless systems allows to minimize cleaning time and maintenance requirements. All phases of box forming, product infeed, filling and box closing are carefully controlled. Great accessibility for GTF60, thanks to its balcony design which optimizes cleaning and funcioning operations Solutions made to measure. Numerous automatic feeding systems are available, using conveyor belts, buckets, stacking or others. The product can be uploaded in the tray by push, by an original MG2 pick & place, or by robot. The infeed position is extremely flexible, for both in-line and 90-degree feeding, in order to meet any line’s layout requirement. In the end, it is possible to fit the machine with several loading areas and different units, such as: leaflet insertion MG2 S.r.l. – Via del Savena, 18 – 40065 Pian di Macina di Pianoro (BO) Italy Tel. +39 051 4694111 Fax +39 051 4694199 [email protected] - www.mg2.it Page 2 unit; box content control; box marking/labelling; bar code readers; rejection station. MG2 S.r.l. – Via del Savena, 18 – 40065 Pian di Macina di Pianoro (BO) Italy Tel. +39 051 4694111 Fax +39 051 4694199 [email protected] - www.mg2.it Page 3