dekomatic
Transcript
dekomatic
DEKOMATIC CHAINS / CATENE / Automatic diamond cutting machine for drawing on chains Automatic diamond cutting machine, with one machining head. DEKOMATIC has been projected for lapping and drawing on plain, angled, concave and convex surfaces of metallic chains. The work cycle is performed in automatic way. The chain enters from the left part of the machine, it crosses a group of friction and it is clamped from a rotating vice that closes and bring it in diamond cutting position. The chain comes diamond cut from rotating utensils fixed to a refrigerated machining head. On DEKOMATIC, are allows workmanships both in horizontal or vertical mode and switching is made manually with extreme rapidity. In horizontal mode, machining head, can assumes various angles of work and it can be directed up to 180°. On DEKOMATIC is possible to fit, four utensils for horizontal workmanships and one for those vertical. The regulation on work point is obtained thanks a device with centesimal negative stroke. Available kit Satinmaticand kit for 4-6-8-sides in one time. The work cycle is performed in closed environment, in order to allow the recovery of workmanship residues. / Diamantatrice automatica per decorazioni su catena Diamantatrice automatica a un modulo di lavoro. DEKOMATIC è stata progettata per lappare e disegnare superfici piane, angolate, concave e convesse di catene metalliche. La catena attraversa un gruppo di frizione ed è accettata da una morsa rotante che la porta nella posizione di lavoro per essere diamantata. Viene poi rilasciata e guidata verso l’esterno della macchina. La testa di lavoro refrigerata, consente di operare sia in modo orizzontale che verticale e il cambio si effettua manualmente in maniera rapida, in modalità orizzontale è orientabile fino a 180°. Si possono montare fino a 5 utensili di cui, 4 per lavorazioni orizzontali e 1 per quelle verticali. Posizionamento motorizzato della testa sul punto di lavoro a battuta negativa centesimale. Tra gli ACCESSORI, disponibili a richiesta, vi sono dispositivi per la satinatura delle superfici e il taglio a 4, 6, 8 lati in unico passaggio. Il ciclo di diamantatura avviene in ambiente chiuso per garantire il recupero dei residui di lavorazione. TECHNICAL CHARACTERISTICS: Power Supply: 230V 50/60Hz single-phase 1,2 Kw Dimensions: cm 75x77x179h - Weight Kg. 730 Work environment conditions: temp. min. 5° max 40° - humidity 90% max Technical date and features, are not binding. FAIMOND s.r.l. reserves the right to modify them at any time. CARATTERISTICHE TECNICHE: Alimentazione: 230 V monofase 50/60 (FN) Hz 1,2 kW Dimensioni: cm 75x77x179h - peso kg 730 Condizioni ambientali di esercizio: temp. min. 5° max 40° - umidità max 90% Dati e caratteristiche tecniche non sono impegnativi. FAIMOND s.r.l., si riserva il diritto di modificarli in qualsiasi momento senza preavviso. DEKOMATIC / Sinusoidal wave on flat chain / Lavorazione sinusoide su catena piatta / Deep cits with angled tool / Tagli profondi con utensile angolato / Satin finishing effect with vertical head / Lavorazione tipo pavè con utensile verticale Notes: Faimond srl Via E. Fermi, 25/27 36057 Arcugnano VI Italy Tel. +39 0444 288666 Fax +39 0444 960973 [email protected] www.faimond.com