Fasit OMNIA/Tesnit BA-U
Transcript
Fasit OMNIA/Tesnit BA-U
(Revisione 2016) Technical data sheet 1 Fasit OMNIA/Tesnit BA-U Gasket material (Aramide fiber, NBR) with good chemical, mechanical and thermal properties. Suitable for general use. TECHNICAL DATA:(thickness 2 mm.) Compressibility Recovery Tensile strenght Stress resistance: 16h, 300°C,50 Mpa 16h,175°C,50 Mpa Specific leak rate Thickness increase: oil IRM 903,5h, 150°C ASTM Fuel B,5h,23°C Max. operating condictions: peak temperature continuous temperature continuous temperature with steam ASTM F36/J ASTM F36/J DIN52910 DIN52913 DIN3535/6 ASTM F 146 Max Pressure: 8 55 11 % % MPa 22 28 0,05 MPa MPa mg/(s.m) 5 5 % % 350 250 200 100 °C °C °C bar APPROVALS DM 174 (Approvazione Iren Laboratori - Gennaio 2017) SVGW, DIN3535/6 DVGW, W270, Wqc/WRAS,BAM,HTB WP401, Germanischer Lloyd BS 7531 Grade Y, UDT, CRS, KTW (2017 Genn.In fase di rinnovo DVGW Ref.KA0254/16) GASKET FACTORS thickness(mm) ASME-EN DIN28090 y / vu (MPa) m/1 PVRC-ROTT m/0,1 Gb (MPa) a Max.Assembly stress Gs (MPa) 1,5 20 2,5 3 6,4 0,25 0,0011 2 22 3 4 13,1 0,21 0,097 3 25 4 5 Follow the recommended installation procedures by regulations. If in doubt please contact Us or visit the web site: vo / Qmax (MPa) 310 240 150 http://www.laguarnizione.it/php/it/istruzioni.php 1Temperature and pressure represent maximum values and should not be used simultaneously. They are given only for guidance, since they depend not only on the type of gasket material but olso on the assembly condictions. Very important factors are:thickness of material, nature of service medium, type of flange, surface stress. Steam application requires special consideration. The recommendations made are intended to be a guideline for selectiopn of suitable gasket quality Because the function and durability of the products depend upon a number of factors, the data mey be used to support any warranty claims. La Guarnizione SRL – Via Sebastiano .Galeotti,4 – 43038 Sala Baganza (PR) – Italy – Tel.(+39)0521833700 – Fax.(+39)0521834935 Email:[email protected] www.laguarnizione.it COMPATIBILITY La Guarnizione SRL – Via Sebastiano .Galeotti,4 – 43038 Sala Baganza (PR) – Italy – Tel.(+39)0521833700 – Fax.(+39)0521834935 Email:[email protected] www.laguarnizione.it