benfer - Online Exhibitor Manuals

Transcript

The Schomburg Group
The SCHOMBURG Group
is an international market
partner in the production
and sales of high-quality
building product systems.
Based on the strong
technological background
of the production company
SCHOMBURG GmbH &
Co. KG the group offers
a variety of products and
services tailored to the needs
of the construction industry.
The German market is
served by two distribution
companies:
• SCHOMBURG GmbH
• SCHOMBURG ICS GmbH.
The SCHOMBURG
headquarters, which houses
research and development,
production, sales, distribution
and logistics is located in
Detmold, Germany. Further
production units and local
research centers exist in
several countries.
SCHOMBURG offers a wide
range of products and systems
for:
• Waterproofing and
restoration
• Tile laying
• Water Protection/
Industrial Floors
• Concrete admixtures
• Other construction
materials.
Our global activities are
managed by the holding
company for non-German
entities, AQUAFIN
International GmbH, which
supports our partners through
six regional offices.
partnerships.
With 16 production plants
in service we can offer quick
supply, even when it comes
to large projects.
To guarantee the best
technical and logistical
support we have regional
service centers with qualified
staff that is familiar with the
local construction market.
Being an international
partnership
the SCHOMBURG
Group is represented by over
30 distribution and production
companies worldwide.
Our products are stocked
at construction merchants in
more than 50 countries and
we constantly improve the
availability through new
BENFER
SCHOMBURG INTERNATIONAL
1
The Schomburg Group
Our sales force understands
the language of the
construction industry.
The majority holds technical
degrees like Civ. Eng.
and/or brings long - term
experience in related fields.
Approximately 6% of our
employees are situated in
AQUAFIN Inc., USA
ROBOTEC-SCHOMBURG AG, Switzerland
the laboratories worldwide
to develop cutting edge
technology and maintain
highest quality standards.
The SCHOMBURG Group
is owned by its management,
with the majority held by
members of the Schomburg
family.
BENFER SCHOMBURG
International is a
joint venture between
BENFER and SCHOMBURG
GmbH & Co. KG. Since
1965 BENFER has
been producing and
selling adhesives and
sealants for ceramic and
natural stone floor and
wall coverings in Italy for
European and international
markets. SCHOMBURG has
been producing high quality
building product systems since
1937 in Germany.
The product range covers
waterproofing materials,
adhesives, tile laying systems
SCHOMBURG Polska Sp.zo.o, Poland
2
BENFER SCHOMBURG Maranello, Italy
BENFER
and industrial flooring
products.
Being in tune with client
needs and the constant
further development of
products has resulted in
BENFER SCHOMBURG
being able to provide
the market with products
and systems that satisfy
the demands. Forming a
new joint venture between
the two companies is the
natural answer to the markets
demands to supply customers
with the best systems and
solutions available at
reasonable costs. Thanks to corporate synergies
and local production
capabilities, BENFER
SCHOMBURG International
has become the best choice
for applicators, architects,
engineers and dealers who
are looking for innovative and
reliable product systems and
solutions.
Certificate according to DIN EN ISO 9001:2008
BENFER
3
Our committment to a better life...
CRISTALLIT-VARIO-light
BENFERFLEX N
CRISTALLIT-MULTI-flex
SOLOFLEX-IT
LIGHTFLEX
DEKOGROUT
MONOFLEX-XL
DEKOGROUT 2/12
BENFERFLEX C2
SOLOPLAN-30
SOLOFLEX-S1
SOLOPLAN-12
SOLOPLAN-FI
SOLIDONE PRONTO
STARPRIM
BENFERRPRIM
SOLIDONE PRONTO page 13
STARPRIM page 62 /BENFERPRIM page 58
SOLOPLAN-30 page 22 / SOLOPLAN-12 page 23 / SOLOPLAN-FI page 24
CRISTALLIT-VARIO-light page 92 /CRISTALLIT-MULTI-flex page 93 /BENFERFLEX C2 page 72
SOLOFLEX-IT page 84 /LIGHTFLEX page 74 /MONOFLEX-XL page 76, SOLOFLEX-S1 page 70
SANIFLEX page 50
DEKOGROUT page 120 /DEKOGROUT 2/12 page 122
4
BENFER
Products certified
From the outset we have been directing our efforts to the formulation of products
free from hazardous chemicals.
For this reason the family of products
certified, those certified to be “very
low emission” of VOC grow every year.
This means actually that you can build your house safe and sound using products
normally available on the market, without any additional cost.
SCHOMBURG products which meet the LEED® and
DGNB criteria
Member of the DGNB German association for
sustainable construction
The adhesives and waterproofing products selected can now also be found in
the Green Building product database at www.greenbuildingproducts.eu.
The products listed here contribute towards points in the LEED® and DGNB
systems. SCHOMBURG supports its customers with successful building
certification to LEED® and DGNB.
SCHOMBURG transparently provides relevant certified information.
On the web site www.benfer.it, in every product sheet,
you can find certificates and information about the
environmental impact and LEED
Product research and documentation is made easier for planners, architects
and construction companies.
BENFER
5
www.benfer.it
A new website,
full of content, but easy to consult.
Two main chapters for a first division of the arguments.
6
BENFER
BENFER
The new website, more complete!
PRODUCT SHEET
with the main data
for an easy choice.
Well defined PRODUCTS groups.
PRODUCT SHEETS
/ CERTIFICATES
all downloadable
from the product sheet
or the home page.
VIDEO / BROCHURES / TABLES
can be downloaded both from
product sheet and home page.
BENFER
7
Floor and wall coverings application
SURFACE PREPARATION
>
>
>
>
>
>
>
>
>
>
>
Fast drying screeds
Lightweight screeds
Self levelling underlayments
Self levelling continuos floor
Accessories for self levelling
Smoothing compounds
Resin mortars for surface repair
Two component cementitious waterproof coatings
One component cementitious waterproof coatings
Elastomeric waterproof coatings
Waterproofing Accessories
12
12
20
22
26
28
30
34
36
48
50
54
CERAMIC TILES AND NATURAL STONES
LAYING62
> Primers62
> High-performance adhesives for ceramic and stable
natural stone laying
70
> High-performance adhesives for natural stone laying
92
> Tile adhesives for interior and exterior
98
> Tile adhesives for interior
102
> Floor sound insulation systems
108
> Waterproofing and decoupling systems for terraces
and green screeds
110
WOODEN FLOORS LAYING
> Wooden floor primer
> Wooden floor adhesives
114
114
115
JOINT AND EXPANSION JOINT SEALING 118
>
>
>
>
>
8
Cement based joint mortars
Epoxy resin joint mortars
Elastic joint sealants
Primer for joint sealants
Expansion joint sealants
BENFER
118
136
142
148
150
Building products
CONCRETE REPAIR
>
>
>
>
154
Repair mortars154
Steel reinforcement treatment157
Fast setting cements and mortars158
Protective coatings
160
WATERPROOFING164
>
>
>
>
>
>
Cementitious waterproofings
Crystalline waterproofing
Construction joint waterstop systems
Injection resins for crack sealing
164
170
178
184
190
194
RESTORATION OF BUILDINGS
200
GROUTS & ANCHORS 210
> Restoration systems for moist walls
200
> Impregnators208
> Adhesive grouts for anchor of foundations and
concrete elements
210
INDUSTRIAL FLOORING AND PROTECTIVE
COATINGS 213
> INDUFLOOR-IB Brochure.213
> Seamless epoxy resin systems
224
ADMIXTURES232
> Betocrete Brochure
> Concrete waterproofing
> Screeds, mortars and plasters admixtures
ACCESSORY PRODUCTS
232
238
244
250
GUIDELINE INSTRUCTIONS FOR SURFACE PREPARATION
258
STANDARDS268
“SELECTION GUIDE” TABLES
275
BENFER
9
Alphabetical Product Index
Product Name / page No.
A
ASO®-Joint-Tape-2000-Prix X,T
ACQUASHIELD46
ASO®-Joint-Tape-2000-S57,185
BENFERDROP209,250
ACQUASHIELD+45
ASO®-Unigrund-GE66
BENFERFINISH33,161
ACRYLIC SEALANT
147
ASO®-Unigrund-K65
BENFERFIX104
ADF-Balkonfolie111
ASO®-Unigrund-S64
BENFERFIX EXTRA
ADF®-Systemkleber-FB110
ASO-Systemvlies-02188
BENFERFIX RAPIDO
86
ADHESIVE JOINT TAPE
59,187
ASOCRET-BS232,160
BENFERFLEX C2
72
ADIPLAST-M246
ASOCRET-HB-flex96
BENFERFLEX N
82
ADIPLAST-P248
ASOCRET-IM183
BENFERFLEX RAPIDO
81
ANTIFUNGAL SILICONE
146
ASODUR®-CeraTec139
BENFERGRES83
AQUAFIN®-1K49,169
ASODUR®-EK98-floor141
BENFERGRIP C2TE
AQUAFIN®-1K-flex48
ASODUR®-EP/FM150
BENFERGRIP+98
AQUAFIN®-2K44,168
ASODUR®-K90034
BENFERGYPS103
AQUAFIN®-2K/M40,164
ASODUR®-LE21
BENFERJOLLY90
AQUAFIN®-2K/M Brochure
36
ASODUR-SG269
BENFERPRIM63
AQUAFIN®-2K-Vlies61,189
ASODUR-SG368
BETOCRETE Brochure
AQUAFIN®-CJ3190
ASOFLEX-AKB-floor52
BETOCRETE-C16238
AQUAFIN®-F198
ASOFLEX-AKB-wall53
BETOCRETE-C17 (BV)
240
AQUAFIN®-i380196
ASOFLEX--PU45151
BETOCRETE C-21 (DM)
242
AQUAFIN®-IC182
ASOL-FE176
BSMAT112
AQUAFIN®-IC Brochure
178
ASOL-SM173
C
AQUAFIN®-LATEX245
ASOLIN-WS208
CARTRIDGE GUN
AQUAFIN®-P1194
ASOPLAST-MZ244
C2+78
AQUAFIN®-P4195
ASOWOOD-2K116
CEMLATEX 600
AQUAFIN®-RS30042,166
ASOWOOD-2KPU115
CEMLATEX 600+BENFERFIX SA95
ASO®-DB Standard
ASOWOOD-Primer114
CEMLATEX GIUNTI
ASO®-EZ2-Plus18
B
COMBIDIC®-1K170
ASO®-EZ4-Plus19
BENFERCEM159
COMBIDIC®-2K175
ASO®-EZ-LIGHT-Plus20
BENFERCLEAN251
COMBIFLEX®-C2/P177
ASO®-Joint-Tape-200054,184
BENFERCLEAN POLVERE
253
COMBIFLEX®-C2/S174
ASO®-Joint-Tape-2000 Angles
BENFERCLEAN STRONG
252
COMBIFLEX®-DS172
BENFERCURE FERRI
157
COMBIFLEX®-EL171
58,187
55
ASO®-Joint-Tape-2000 Joint sleeve 56
10
BENFER
55
BENFERCURE PLUS
156
101
100
232
255
85
133
Alphabetical Product Index
CRISTALLFUGE118
INDU-DecorQuartz231
S
CRISTALLIT-MULTI-flex93
INDU-FLEX-CJ13191
SANIFIN113
CRISTALLIT-VARIO-light92
INDUFLEX-VK6060152
SANIFLEX50
D
INDUFLEX-VK-TKF-2000mv153
SOLIDONE12
DEKOGROUT120
INDUFLOOR® Brochure
SOLIDONE PRONTO
13
DEKOGROUT 2/12122
INDUFLOOR®-IB1275224
SOLIDONE RAPIDO
14
DEKOGROUT-2K136
SOLIDONE FLUIDO
15
DEKOGROUT-2K KIT
138
SOLIDONE FLUIDO FAST
16
DEKOSIL143
SOLOCRET-1531
DKWALL134
SOLOCRET-5030
E
SOLOFLEX ANHYDRITE
EASYBATH51
SOLOFLEX-IT84
EASYTILE105
SOLOFLEX-S170
EPOXYJOINT140
L
SOLOPLAN®-1223
ESCO-FLUAT200
LEADERFLEX RAPIDO
80
SOLOPLAN®-3022
ESCOSIL®-2000-ST142
LIGHTFLEX74
SOLOPLAN-FI24
ESCOSIL®-2000-UW144
M
SOLOPLAN-HF26
F
MARMOFLEX94
SPACERS257
158
MONOFLEX-FB-IT79
STARPRIM62
FIBRE GLASS MESH 60,187,256
MONOFLEX-XL76
STEPBOARD109
FLEXIBLE CEMLATEX SOLUTION 87
N
STEPBOARD SILENT
H
NIENTEMUFFA206
T
HF05-Brillantfuge124
P
THERMOPAL®-FS33205
HOT MELT ADHESIVE STICK 254
POWERPLAST D2
106
THERMOPAL®-GP11201
HOT MELT STICK GUN
PRIMAFUGA 0/0
128
THERMOPAL®-SP202
I
PRIMAFUGA 2/12
126
THERMOPAL®-SR24203
INDUBOND-Tape-3000192
PRIMAFUGA 0/5
130
THERMOPAL®-SR44204
INDUBOND-VK4031193
PRIMAFUGA 5/15
132
U
INDUCRET-OS/BF162
Primer-2000148
UNIFIX®-2K/688
INDUCRET-VARIO-10 & 40
Primer-2000-S149
UNIFIX®-S389
FIX 10-S
255
154
213
INDUCRET®-VK30210
R
INDUCRET®-VK100211
RD-SK5028
BENFER
102
108
11
Fast drying screeds
Company with certified quality system ISO 9001/2008
SOLIDONE
Hydraulic binder for fast drying screed (4 days*) with controlled shrinkage
• Floating screed walkable in 6-10 hours* and dry
(humidity < 2%) in 4 days*
• Certainty of implementation time
• Applicable also for renovation of old ceramic floors
• Also for industrial environments subject to heavy or intense
traffic
• Better workability
• No shrinkage
Pot life:≥ 60 min*
Light foot traffic after: 6-10
hours*
Consumption:
2.5 - 3.5 kg/m²/cm thickness
‍Remark: Ecologic, fast drying
Art. no/Colour
E/Kg
E/Package
Packing/Pallet
000009510/Grey
0,58
11,60/20 kg bag
50 bags/pallet
SOLIDONE is an hydraulic binder formulated with special high resistance cements
and synthetic additives for the preparation of sub-bases exempt from shrinkage.
Thanks to its composition, mixed at the work site with fine gravel and water, it
permits the combining of adherent and floating screed (also heated) up to 10
centimeters in depth, suited to the laying of ceramic tiles after only 24* hours and
wooden and resilient floors after only 4* days.
Professional use for interior and exteriors.
Product Technical Data
Consistency:Powder
Storage:
In the original closed package in a cool dry place
Duration: 12 months
Danger of harm:
No. Possible irritation of the eyes and skin for contact due
to the cement content
Inflammability:No
Apparent mass volume:
800 kg/m3
Recommended dosage:
250-350 kg/m3 with 1600-1750 kg/m3 of fine gravel
Mix contents:
90-130 liters/m3 of water according to the humidity level
of the aggregates and the chosen dosage
Mix consistency:
Humid soil
Application temperature:
From + 5°C to + 35°C
Life of the mixture:
60 minutes*
Light practicability on dry supports:
Approximately 6 hours*
Laying ceramic tiles:
24/36 hours* (subject to residual humidity check <6%)
Laying marble and stable natural stone: 2/3 days* (subject to residual humidity check <3%)
Laying wood and resilients:
4/7 days* (subject to residual humidity check <2%)
Final hardening:
7/10 days*
* at +20°C, 65% relative humidity
12
BENFER
Fast drying screeds
Consult the technical specifications at www.benfer.it / www.schomburg.de
SOLIDONE PRONTO
Ready to use mixture for fast drying screed (4 days*) with controlled shrinkage
Pot life ≥ 60 min*
Light foot traffic after: 6-10
hours*
Consumption:
14 -16 kg/m²/cm thickness
• Floating screed walkable in 6-10 hours* and dry
(humidity < 2%) in 4 days*
• Certainty of implementation time
• Simplification of construction site organization
• Applicable also for renovation of old ceramic floors
• Also for industrial environments subject to heavy or intense
traffic
• Better workability
• No shrinkage
• EC1: very low emission
•
EN 13813 CT C30 – F6 A1 fl
‍Remark: Ecologic, fast drying
Art. no/Colour
E/Kg
E/Package
Packing/Pallet
000009521/Grey
000009520/Grey
0,24
0,24
6,00/25 kg bag
6,00/25 kg bag
40 bags/europallet
60 bags/pallet
A high resistance mixture of special cements, synthetic additives and selected
aggregates for the preparation of sub-bases exempt from shrinkage classified
according to EN 13813, such as CT C30 - F6 A1 fl. Thanks to its composition,
mixed at the work site with water, it permits the combining of adherent and
floating screed (also heated) up to 8 centimeters in depth, suited to receiving the
laying of ceramic tiles after only 24* hours and wooden and resilient floors after
only 4* days.
Professional use for interior and exteriors.
Classification according to EN 13813: CT C30 - F6 A1 fl
Consistency:
Premixed powder
Storage:
Duration: 12 months
Danger of harm:
to the cement content
Inflammability:No
1500 kg/m3
Mix contents:
1,7 Liters of water for 25 kg bag
Mix consistency:
Humid soil
Life of the mixture:
≥ 60 minutes*
Light practicability on dry supports:
Approximately 6-10 hours*
Laying ceramic tiles:
24/36 hours* (subject to residual humidity check <6%)
Laying marble and stable natural stone:
Laying wood and resilients:
Final hardening:
4/7 days*
*) at +20°C, 65% relative humidity
BENFER
13
Fast drying screeds
SOLIDONE RAPIDO
High strength, rapid setting pre-blended mortar for fast drying screed (4 hours*)
•
•
•
•
•
Pot life ≥ 30 min*
Light foot traffic after:120 min*
Consumption:
14-16 kg/m²/cm thickness
EN13813 CT C60-F10-A1fl
Remark: Ecologic, fast drying
Dry (humidity < 2%), in 4 hours*
Walkable in 2 hours*
Thickness from 2 to 8 cm
For fixed or floating screed (even heated)
SOLIDONE RAPIDO is a mixture of special high resistance cements,
synthetic additives and selected aggregates for the preparation of
screed exempt from shrinkage, classified according to
EN13813 CT C60-F10 A1fl
Thanks to its composition, mixed at the work site with water, allows
the construction of adherent and floating screed (even heated) up
to 8 centimeters thick, suited to receive the laying of ceramic tiles
after only 3 hours* and of wooden and resilient floors after only
4 hours*.
Professional use, for interior.
Art. no./Colour
E/Kg
E/Package
Packing/Pallet
000001037/Grey
0,58
14,50/25 kg bag
40 bags/pallet
Classification according to:
EN13813 CT C60-F10-A1fl
Consistency:
powder
Storage:
in the original closed package in a cool dry place
Duration: 6 months
Danger of harm:
no, possible irritation of the eyes and skin for contact due to the
cement content. Adequate protection is recommended
Flammability:no
1.500 kg/m3
Mix contents:
1.7 liters of water for 25 kg bag
Mix consistency:
humid soil
from + 5° C to + 35° C
Pot life of the mixture:
30 minutes*
Traversable on dry substrate:
approximately 120 minutes*
Ceramic tiles laying:
after 2 hours* (subject to residual humidity check <6%)
Marble and stable natural stone laying:
Wood and resilient laying:
Final hardening:
3 days*
Final performance:
Residual moisture after 2 hours*:< 6%
Compression strength after 24 hours*:> 20 N/mm²
Compression strength after 28 days*:> 40 N/mm²
Temperature resistance:from -30°C to +90°C
* Data referred to a floating screed 4 cm thick at +23°C and 50% RH
14
BENFER
Fast drying screeds
SOLIDONE FLUIDO
Pre-blended cement based mortar for screed with fluid consistency
• Fluid cement based screed • Suitable for all kind of floor
covering • Walkable in 24 hours* and ready for tiles in 4
days* • For floating screed (even heated) • Thickness from
5 to 10 cm • Easy apply and cost saving thanks to its fluid
consistency • The long workability time (45 minutes*), allows
the application without pump • Reinforcement mesh not
necessary • Available in 25 kg bag • EC1 •
Pot life: 45 min*
Light foot traffic after:
24 hours*
Consumption:
16 -17 kg/m²/cm thickness
EN 13813 CT C30 – F5 A1 fl.
SOLIDONE FLUIDO is a mixture of special cements, synthetic
additives and selected aggregates for the preparation of screed
exempt from shrinkage, classified according to
EN 13813, such as CT C30 – F5 A1 fl.
Thanks to its composition, mixed at the work site with water, it
becames a fluid mortar and allows the fast and safe construction
of floating screed (even heated) from 5 to 10 centimeters
thickness, with little manpower. Important characteristics are the
absence of crazing and fissures even when applied in varying
thickness (on heating systems).
SOLIDONE FLUIDO can be used with a traditional mixing/
pumping machine or with a cement mixer. Suitable for interior
application only. Professional use.
Remark: Ecologic, cost reduced
Art. no./Colour
E/Kg
E/Package
Packing/Pallet
000001039/Grey
0,36
9,00/25 kg bag
40 bags/europallet
Classification according to:
Consistency:
Storage:
Duration: Danger of harm:
EN 13813 CT C30 – F5 A1 fl
powder
12 months
no, possible irritation of the eyes and skin for contact due to the cement content.
Adequate protection is recommended.
Flammability:no
1.900 kg/m3
Mix contents:
4,25 liters of water for 25 kg bag
Mix consistency:
fluid mortar
from + 5° C to + 35° C
45 minutes*
approximately 24 hours*
after 4 days* (subject to residual humidity check <4%)
after 8-10 days* (subject to residual humidity check <3%)
Final hardening:
28 days*
Final performance:
Residual moisture after 4 days*:
Compression strength after 28 days*:
Flexural strength after 28 days*:
Temperature resistance:
< 4%
< 3%
< 2%
> 30 N/mm²
> 5 N/mm²
from -30°C to +90°C
* Data referred to a floating screed 5-6 cm thick at +23°C and 50% relative humidity
BENFER
15
Fast drying screeds
SOLIDONE FLUIDO FAST
Rapid setting cement based mortar for screed with fluid consistency
• Fluid cement based screed • Walkable in 3 hours* and ready
for tiles in 24 hours*• For floating screed (even heated)
• Thickness from 4 to 7 cm • Easy to apply and cost saving
thanks to its fluid consistency • The long workability time (45
minutes*), allows the application without pump
• Reinforcement mesh not necessary •
Pot life: 45 min*
Light foot traffic after: 3 hours*
Consumption: 16-17 kg/m²/cm
thickness
EN 13813 CT C25 – F5 A1 fl.
SOLIDONE FLUIDO FAST is a mixture of special cements,
synthetic additives and selected aggregates for the preparation
of fast drying screed exempt from shrinkage , classified according
to EN 13813, such as CT C25 – F5 A1 fl.
Thanks to its composition, mixed at the work site with water, it
becames a fluid mortar and allows the fast and safe construction
of floating screed (even heated) from 4 to 7 centimeters thick,
with little manpower.
Important characteristics are the absence of crazing and fissures
even when applied in different thickness (on heating systems).
SOLIDONE FLUIDO FAST can be used with a traditional mixing/
pumping machine or with a cement mixer.
Walkable in 3 hours* and ready for tiles in 24 hours*.
Suitable for interior application only. Professional use.
Remark: Ecologic, cost reduced
Art. no./Colour
E/Kg
E/Package
Packing/Pallet
000001043/Grey
0,60
15,00/25 kg bag
40 bags/pallet
Classification according to :
Consistency:
Storage:
Duration: Danger of harm:
EN 13813 CT C25 – F5 A1 fl
powder
6 months
no, possible irritation of the eyes and skin for contact due to the cement content
Flammability:no
1.900 kg/m3
Mix contents:
4,25 liters of water for 25 kg bag
Mix consistency:
fluid mortar
from + 5° C to + 35° C
45 minutes*
approximately 3 hours*
Final hardening:
14 days*
Final performance:
Compression strength after 28 days*:
Flexural strength after 28 days*:
16
< 4%
< 3%
< 2%
> 25 N/mm²
> 5 N/mm²
* Data referred to a floating screed with thickness ≤ 6 cm at +23°C and 50% RH
BENFER
BENFER
17
Fast drying screeds
ASO®-EZ2-Plus
Rapid setting pre-blended mortar with high strength
Pot life: ≥ 60 min*
Foot traffic after: 6 hours*
Consumption: 20 kg/m²/cm
thickness
EN 13813 CT-C60-F7-A9
Remark: High strength, foot
traffic after 6 hours
• High strength, can be used in a minimum thickness of 10 mm
bonded to the substrate (with ASOCRET-HB-Flex), and 40 mm
unbonded
• Rapid hardening
• High application security
• Constant screed quality
• For interior and exterior areas
• Long pot life
• Foot traffic after 6 hours
• Lay tiles and slabs early
• Can be heated after 3 days
•
Art. no/Colour
E/Kg
E/Package
Packing/Europallet
205530001/Grey
1,06
26,50/25 kg bag
42 bags/europallet
ASO-EZ2-Plus is a pre-blended mortar for the production of rapid setting cementbased screeds ready to be laid on early and with high strength. Suitable for
bonded, unbonded or screeds over insulation and heated screeds either as a
wearing surface or as a base under tiles, slabs, textile coverings, parquet or PVC.
Basis:
Special cement, additives, aggregate
Colour:Grey
Water demand:
1,6 - 2 litres/25kg ASO-EZ2-Plus (semi-dry 6,5 - 8.0% water)
Storage:
12 months in the original unopened package in a cool dry place
Cleaning:
Clean tools and equipment immediately after use with water
Classification:
EN 13813 CT-C60-F7-A9
Fire rating:
A1 according to resolution 96/103/EG
Foot traffic after:
Approx. 6 hours*
Fully cured after:
Approx. 7 days*
Pot life:
Approx. 60 minutes*
Application/substrate temp:
Min. nominal thickness to DIN 18560:Beneath tiles 40 mm on insulation or separating layer
Beneath parquet, 30 mm on insulation or carpet, linoleum or PVC separating layer
In general 10 mm bonded
18
BENFER
Fast drying screeds
ASO®-EZ4-Plus
Rapid setting, water repellent pre-blended dry mortar
• Water repellent & protects against efflorescence
• High application assurance
• Consistent screed quality
• Long working time
• Rapid setting – Foot traffic after 6 hours
• For the early installation of tiles
• Can be heated after 3 days according to technical regulations
• Ready to use, simply add water
•
Pot life: 60 min*
thickness
EN 13813 CT-C50-F6-A9
Remark: Water repellent, foot
traffic after 6 hours
Art. no/Colour
E/Kg
E/Package
205528001/Grey
1,12
28,00/25 kg bag
Packing/Europallet
42 bags/europallet
ASO-EZ4-Plus is a fibre reinforced pre-blended mortar for the production of water
repellent cementitious screeds and mortars that will take finishes early and offer
increased protection against frost damage and efflorescence. As a rapid setting,
water repellent mortar bed for laying natural stone, tiles and slabs in exterior and
wet areas such as balconies, terraces, loggia, stairwells, swimming pools, damp
rooms, laundries and water containers. Screeds produced with ASO-EZ4-Plus
can be laid either bonded, unbonded on polythene or floating on insulation or
as heated screeds whether as a wearing finish or as a base for tiles, slabs and
natural stone.
Basis:
Special cement, additives, aggregate
Colour:Grey
Water addition:
1,6 - 2 litres/25 kg ASO-EZ4-Plus (semi-dry consistency - stiff-plastic)
Classification:
EN 13813 CT-C50-F6-A9
Fire rating:
A1 in accordance with resolution 96/603/EG
Foot traffic after:
Approx. 6 hours*
Fully cured after:
Approx. 7 days*
Working time:
Approx. 60 minutes*
Min. nominal thickness to DIN 18560: Beneath tiles 40 mm on insulation or separating layer
Beneath parquet, 30 mm on insulation or carpet, linoleum
separating layer or PVC
In general 10 mm bonded
BENFER
19
Lightweight screeds
ASO®-EZ-LIGHT-Plus
Lightweight cement-based screed
•
•
•
•
•
•
•
Pot life: 60*
thickness
EN 13813 CT- C25-F4
Very low weight per unit area
Especially suitable for renovation work
High application confidence
Constant screed quality
For interior and exterior use
Long working time
Consumption:
Approx. 13 kg ASO-EZ-LIGHT-Plus per m2/cm screed thickness
Minimum nominal thickness DIN 18560:
- Beneath tiles 45 mm on insulation or a separating layer
- Beneath parquet, carpet, linoleum or PVC 40 mm on insulation or
a separating layer
- General 20 mm bonded
Remark: Light weight
Art. no/Colour
E/Kg
E/Package
Packing/Europallet
205038002/Grey
1,80
45,00/25 kg bag
42 bags/europallet
ASO-EZ-LIGHT-Plus is a pre-blended material for producing screeds with low
weight per unit area.
Screeds produced with ASO-EZ-LIGHT-Plus are suitable as bonded screeds
or unbonded screeds over a separating layer or insulation as well as heated
screeds, whether used as a wearing finish or as a substrate for further finishes
e.g. tiles, slabs and natural stone.
In wet areas the ASO-EZ-LIGHT-Plus screed is to be waterproofed with a suitable
SCHOMBURG tanking product e.g. AQUAFIN-2K/M.
Basis:
Weight:
Coefficient of thermal conductivity:
Water addition:
Mixing method:
Storage:
Classification:
Fire classification:
Cleaning:
Foot traffic after:
Full loading after:
Working time:
20
Special cement, additives, special lightweight aggregate
Approx. 13 kg/m2/cm screed thickness
Approx. 0,17 W/m °K
4,5 to 5,5 litres /25 kg
Forced paddle mixer, free fall mixer
Cool and dry, 12 months in the original unopened packaging.
Use opened packaging promptly.
EN 13813 CT-C25-F4
A1fl in accordance with resolution 96/603/EG
Cleans tools and equipment with water immediately after use
Approx. 48 hours*
Approx. 28 days*
Approx. 60 minutes*
* at +23°C, 65% RH.
Higher temperatures shorten whereas lower temperatures
lengthen the given timings.
BENFER
Lightweight screeds
ASODUR®-LE
Lightweight epoxy resin screed
ASODUR-LE is used in the renovation of old buildings
• On wooden floors as a substrate for the installation of ceramic
tiled finishes in wet areas when in combination with the
necessary waterproofing measures
• On old wooden floorboards as a substrate for ceramic floor
tiles, parquet or carpet
• On cement-based substrates, on asphalt floors etc
Pot life: 40 min*
Consumption:
• 1.15 kg/m²/mm thickness
• 17.25 kg/m² for15 mm
thickness
Remark: Light weight, minimum
thickness 15 mm
Art. no/Colour
E/Kg
E/Package
Packing/Europallet
205797002/Grey
6,00
360,00/60 kg set
(10 kg binder + 2x25 kg Special lightweight aggregate)
600 kg
ASODUR-LE is a three-component lightweight epoxy resin screed.
ASODUR-LE consists of a two-component, solvent free, low viscosity epoxy resin
(as binder) and a special lightweight aggregate as the third component.
After installation ASODUR-LE has a weight per area of only approx. 18 kg/m2
at 15 mm minimum thickness.
In the hardened state ASODUR-LE possesses high abrasion resistance, heat
insulating properties and impact sound minimising properties when used with
conventional impact sound insulation.
Binder
Finished screed
Viscosity:
800 mPa s
Consistency:Mortar-like
Approx. 1,15 g/cm3
Density*:
Approx. 1,10 g/cm3
Mixing ratio:
2 :1 parts by weight
1 : 5 parts by weight
(resin: hardener)
(binder: aggregate)
Pot life:
Approx. 40 min*
Approx. 45 min*
Curing temp. (material/substrate):
Foot traffic after:
Approx. 16 hours*
Approx. 16 hours*
Overcoat after:
Approx. 16 hours*
Approx. 16 hours*
Full load after:
Approx. 7 days*
Approx. 7 days*
Compressive strength:
Approx. 26 N/mm2
Flexural strength:
Approx. 13 N/mm2
Consumption:
Approx. 1,15 kg/m2/mm thickness
Cleaning:
Clean tools immediately after use with AQUAFIN-Reiniger
Storage:
18 months when stored cool and dry in the original unopened container
BENFER
21
SOLOPLAN®-30
Self levelling underlayment up to 30 mm
•
•
•
•
•
•
•
•
•
•
Water resistant, for interior and exterior
Fast curing, traversable after 4 hours
Polymer modified
Suitable for heated screeds
Easy to process
Pumpable
For layers 3 - 30 mm thick
Meets class RWFC-550 according to DIN EN 13892-7
EC1: very low emission
Pot life: 30 min*
Consumption:1.65 kg/m²/mm
thickness
EN 13813 CT-C30-F7
Remark: Water resistant, fast
setting, ecologic
Art. no/Colour
E/Kg
E/Package
Packing/Europallet
201338001/Grey
1,12
28,00/25 kg bag
42 bags/europallet
SOLOPLAN-30 is used for smoothening and levelling in layers of 3 – 30 mm
thick. Suitable surfaces are floors made of concrete in accordance to German
Industrial Standard DIN 1045, heated and unheated cement screeds according
to DIN 18560, old hardened tile surfacess and rapid hardening cement screeds
(for example ASODUR-EZ6 Plus).
SOLOPLAN-30 is suitable for exterior areas and areas subject to moisture loads,
provided a suitable SCHOMBURG compound waterproofing sealant has been
applied in advance. Other than the already planned surface, it is not suitable as
a wearing surface without additional coating!
Basis:
Cement, aggregates,additives
Colour:Grey
Bulk density:
1.4 kg/dm3
Application and surface temperature:
Pot life:
30 minutes*
Traversable:
After approx. 4 hours*
≥ 30 N/mm2 after 28 days
Flexural strength:
≥ 7 N/mm2 after 28 days
Classification:
EN 13813 CT-C30-F7
Fire behaviour rating:
A2
Storage:
Dry, 6 months in originally closed packs, opened packs are to be
sealed and be used up as soon as possible
22
BENFER
SOLOPLAN®-12
Smoothing compound up to 12 mm
•
•
•
•
•
•
•
•
•
Polymer modified
Self levelling
Water resistant
Easy to use
Rapid setting
Pumpable
For thicknesses from 1 to 12 mm
Pot life: 30 min*
thickness
EN 13813 CT-C25-F4
Remark: Easy to use
Art. no/Colour
E/Kg
E/Package
Packing/Europallet
201344001/Grey
1,05/kg
26,25/25 kg bag
42 bags/europallet
SOLOPLAN-12 is used in thicknesses from 1-12 mm for smoothing, repairing and
levelling. Suitable substrates are concrete floors in accordance with DIN 1045,
heated and unheated cement-based screeds in accordance with DIN 18560,
old, well bonded tile finishes and rapid cement-based screeds (e.g. ASO-EZ6Plus). SOLOPLAN-12 is suitable for external areas and those subjected to wet
conditions when a suitable SCHOMBURG bonded waterproof membrane is
installed. Not suitable as a wearing surface without additional finishes. Suitable
substrates that have been levelled with SOLOPLAN-12 can be covered with tiles,
needle punched carpets, textile finishes, PVC, linoleum, cork etc.
Basis:
Cement, aggregates,additives
Colour:Grey
Bulk density:
approx. 1.5 kg/dm3
Pot life:
30 minutes*
Application temp:
+5° C to +25° C
> 25 N/mm2 after 28 days
Flexural strength:
> 4 N/mm2 after 28 days
Classification:
EN 13813 CT-C25-F4
Cleaning:
in the fresh state with water
Consumption:
approx. 1.7 kg/m2/mm thickness
Storage:
Dry, 6 months in originally closed packs, opened packs are to be sealed
and be used up as soon as possible
BENFER
23
SOLOPLAN®-FI
Fibre reinforced rapid setting cement based self levelling compound
Pot life: 30 min*
Foot traffic after: 2-3 hours*
thickness
EN 13813 CT-C30-F7
Remark: Ideal for plywood and
chipboard overlay
• Fibre reinforced, suitable on plywood overlay
• Suitable on underfloor heating
• Fast curing, traversable after 2-3 hours*
• Flexible, polymer modified
• Low emission
• Easy to process, can be pump applied
• For layers 3 – 50 mm thick
• For interior application only
•
SOLOPLAN-FI is used for smoothening and levelling in layers of
3 -50 mm thick.
Suitable surfaces are floors made of concrete, heated and
unheated cement screeds, old tile surfaces and rapid hardening
cement screeds.
SOLOPLAN-FI is also suitable for use on plywood overlay, on
chipboard and on old wooden floorboards as well.
Art. no/Colour
E/Kg
E/Package
Packing/Europallet
000012060/Grey
1,40
28,00/20 kg bag
56 bags/europallet
Classification to DIN EN 13813: CT-C30-F7
Colour: grey
Storage: dry, frost free 12 months in the original unopened packaging.
Toxicity :
he cement content of the product may cause irritation to the eyes and skin.
We suggest to adopt appropriate protections.
Flammability:no
Density :1.65 kg/dm3
Water addiction:
4,40 – 4,60 liters per 20 kg bag
Mortar consistency:
fluid
Substrate/application temperature: +5°C to +35°C
Pot life : 30 mins*
Foot traffic on dry support after:
2-3* hours
Tile laying after:
app. 24* hours (check residual moisture < 4%)
Natural stone laying after:
app. 48* hours (check residual moisture < 3%)
Parquet and resilient floor laying after: app. 3* days (check residual moisture < 2%)
Fully cured after:
3 days
Final performance:
Residual moisture after 24 hours*:
< 4%
Residual moisture after 48 hours*:
< 3%
< 2%
Compressive strength: approx. 30 N/mm² after 28 days
Flexural strength: approx. 7 N/mm² after 28 days
Cleaning: clean tools with water whilst fresh
*Data related to a floating screed with thickness ≤ 5 cm at +23°C et 50% RH
24
BENFER
BENFER
25
Self levelling continuous floor
SOLOPLAN-HF
Self levelling compound highly resistant to abrasion for heavy duty areas
•
•
•
•
•
Pot life: 45 min*
Foot traffic after: 3 - 4 hours*
Consumption: 2 kg/m²/mm
thickness
EN 13183
CT C35 – F10 – AR 0,5
Remark: High abrasion and
wear resistance
Self levelling • Rapid hardening and ready for early traffic
High abrasion and wear resistance • Waterproof
Frost proof and salt resistant • Aging and UV resistant
For interior and exterior application
Can be sanded and polished • For layers 3-30 mm thick
SOLOPLAN-HF is used as a floor coating, which is impermeable
to water and highly resistant to abrasion on screed or concrete.
It is installed on industrial or commercial floors, loading ramps,
garages, cellar floors, which need to be quickly in use and
can be maintained with a smooth, wear resistant surface. As
soon as SOLOPLAN-HF has hardened and the surface will not
become damaged by foot traffic, a transparent protection to the
surface against dirt and liquids should be applied. SOLOPLANHF can be broadcast whilst wet with INDU-DecorChips for a
coloured design. SOLOPLAN-HF can be coated with materials
from the SCHOMBURG product range but sealers only after
consultation with technical services. SOLOPLAN-HF is suitable for
overcoating with flexible, mineral-based waterproof slurries from
the SCHOMBURG product range such as e.g. AQUAFIN-RS300
or AQUAFIN-2K/M.
Art. no/Colour
E/Kg
E/Package
Packing/Europallet
203514002/Grey
2,80
70,00/ 25 kg bag
42 bags/europallet
Packaging:
25 kg plastic bag
Mixing time:
2-3 min.*
Minimum thickness:
3 mm
Maximum thickness:
30 mm
Density of fresh mortar:
2.00 kg/dm3
Consumption:
2.0 kg/m2 per mm thickness
Pot life :
45 min*
Pot life, +30 °C:
30 min*
Substrate/application temp.:
+5°C to +30°C
Tensile adhesion strength:
> 3.0 N/mm2 after 28 days
Flexural strength:
approx. 10 N/mm2 after 28 days*
approx. 40 N/mm2 after 28 days*
Classification to DIN EN 13813:
EN 13813 CT-C35-F10-AR 0.5
Shore D hardness after 4 hrs:
approx. 62 – 70 (according to DIN 53505)
Water vapour resistance coefficient μ: approx. 200
Storage:
dry, frost free 12 months in the original unopened packaging.
Cleaning:
Clean tools with water whilst fresh
Loading
• From foot traffic after 3- 4 hours*
• From vehicular traffic with soft tyres (Axle load < 2 tonnes) after 24 hours
* at +23°C et 50% relative humidity
26
BENFER
BENFER
27
Accessories for self levelling
RD-SK50
Self-adhesive insulating edging strip
•
•
•
•
•
PE edge insulation strip
Self-adhesive foot with upright effect
Prevents sound bridges
Prevents mortar bridges
Especially suitable for renovation work
Remark: Self-adhesive
Art. no/Colour
E/m
E/Package
Packing/Europallet
205978002/PE
3,40
340,00/box (20 m x 5)
60 boxes/europallet
RD-SK50 is used to eliminate sound and mortar bridges. RD-SK50 can be used
in combination with levelling compounds, screeds and de-coupling systems e.g.
SOLOPLAN-30, wooden floor smoothing compounds SOLOCRET-15, the ASOEZ product range and de-coupling systems such as STEPBOARD.
RD-SK50 is equipped with a self adhesive foot so that the edge insulation
strip can be well positioned against rising building sections without leaving
adhesive residues behind on the wall. Therefore mortar and sound bridges are
eliminated. Suitable for the installation of tiles, parquet and laminate especially
in the renovation of apartment blocks.
Basis:
Packaging:
Colour:
Thickness/height/length:
Application/substrate temperature:
Reaction to fire to DIN 4102:
Storage:
28
PE foam with self-adhesive foot and fleece backing
5 rolls of 20 m in a box
grey with SCHOMBURG printed
5 mm/50 mm/20 m
+5° C to +30° C
B2
dry, 12 months in the original unopened packaging
* at +23°C et 50% RH
BENFER
BENFER
29
Smoothing compounds
SOLOCRET-50
Anti-sag smoothing compound - rapid gardening
• For thicknesses from 2 to 50 mm
• Rapid hardening
• For walls, ceilings and floors
• For interior and exterior use
• Polymer modified
• Low shrinkage
Pot life: 30 min*
Consumption: 1.5 kg/m²/mm
thickness
Remark: Rapid hardening,
thickness 2-50 mm
Art. no/Colour
E/Kg
E/Package
Packing/Europallet
205440001/Grey
0,92
23,00/ 25 kg bag
42 bags/europallet
For levelling and smoothing uneven mineral-based walls, ceilings and floor areas
that are to be waterproofed or tiled. SOLOCRET-50 is suitable for exterior and wet
duty areas when an appropriate SCHOMBURG bonded waterproof membrane
is installed. The mineral-based substrate must be load-bearing, solid, have a good
key and be free from materials acting as separating layers. The load-bearing
capacity of the substrate must be appropriate to take loads in accordance
with DIN 1055. Separating layers, laitance and similar must be mechanically
removed by suitable means e.g. surface abrasive blasting or scabbling. Ensure
there is no moisture pressure from the negative side. Shrinkage processes must be
largely at an end.
Basis: Colour: Bulk density: Pot life: Overcoat: Flexural and compressive strength: Application/substrate temperature: Cleaning tools: Consumption: Packaging: Storage: 30
Cement, aggregate, high quality additives
Grey
approx. 1.2 kg/dm3
approx. 30 min*
after approx. 3 hours *
approx. 4.0/25 N/mm² after 28 days
+5° C to +25° C
with water whilst fresh
approx. 1.5 kg/m² at 1 mm thickness
25 kg bag with PE liner
dry, min. 6 months in the original unopened packaging.
BENFER
Smoothing compounds
SOLOCRET-15
Sag resistant wall and floor levelling compound
• For interior and exterior applications beneath waterproofing
in swimming pool tanks and exterior areas
• Low tension
• Rapid setting
• For walls, ceilings and floors
Pot life: 30 min*
Light foot traffic after: 4 hours
thickness
Remark: rapid setting, thickness
≤ 15 mm
Art. no/Colour
E/Kg
E/Package
Packing/Europallet
205437001/Grey
0,68
17,00/ 25 kg bag
42 bags/europallet
SOLOCRET-15 is a polymer modified, cement based levelling mortar used to
create even substrates for subsequent applications of waterproofing or tiling
products.
For interior and exterior applications to level and smooth uneven mineral-based
wall, ceiling and floor areas that are to be waterproofed or clad with tiles. Also
for use beneath waterproofing in swimming pool tanks and exterior areas.
Basis:
Cement, aggregates, high quality additives
Colour:Grey
Bulk density:
Approx. 1,4 kg/dm³
Pot life:
Minimum 30 minutes*
Overcoat after:
Approx. 4 hours*
Flexural and compressive strength:
4/25 N/mm² after 28 days*
Substrate temperature:
BENFER
31
Smoothing compounds
ASOCRET-BS2
Repair and resurfacing mortar
• Repairing and finish of ceiling and wall surfaces
• Suitable for concrete and precast concrete
• For interior and exterior applications
• For the filling of joints
Pot life: 30 min*
thickness
Remark: Easy to use, nice
finishing
Art. no/Colour
E/Kg
E/Package
Packing/Europallet
205506002/Grey
1,00
25,00/ 25 kg bag
42 bags/europallet
ASOCRET-BS2 is used as a filling and finishing mortar up to 10 mm in one coat
for concrete wall and ceiling areas.
It is also for levelling up uneven wall surfaces e.g. masonry work, cement renders
etc, which are to be waterproofed or tiled.
ASOCRET-BS2 is also suitable as a render for thicknesses from 5 - 10 mm.
ASOCRET-BS2 can be modified with ASOPLAST-MZ.
The additive imparts increased tensile adhesion strength, improved elasticity,
better water resistance and increased resistant to chemicals to the cured mortar.
It also acts against rapid water loss (dehydration).
Basis:
Colour:
Bulk density:
Pot life:
Cleaning tools:
Consumption:
Packaging:
Storage:
32
cement-based mortar
grey
1.3 kg/dm3
30 mins*
+5° C to +25° C
With water whilst still fresh. Dried material is difficult to remove
25 kg
6 months when stored dry in the original unopened packaging.
BENFER
Smoothing compounds
BENFERFINISH EXTRA-WHITE, WHITE, GREY
Smoothing compound, with fine finishing, extra white, white or grey, for outside or inside
• Transpiring
•Colour extra-white, white or grey
•Good workability and easy resume of the work
•Good workability with the trowel and a pleasant finishing
•Good adhesion also on seasoned plasters
•Classification EN 998-1: mortar type GP, category CS II
•
Pot life: Up to 4 hours*
Waiting time before applying
the 2nd coat: 60-90 min*
thickness
Remark: Good workability
with the trowel and a pleasant
finishing
Field of application
For finishing and leveling irregularities on traditional or
premixed plasters, old and new ones, for outside and inside, of
residential, tertiary, commercial and industrial buildings.
Art. no/Colour
E/Kg
E/Package
Packing/Pallet
000001423/Extra white
000001422/White
000001419/Grey
0,50
0,50
0,44
12,50/ 24 kg bag
12,50/ 25 kg bag
11,00/ 25 kg bag
60 bags/pallet
60 bags/pallet
60 bags/pallet
Substrates:
• Cement and lime based traditional or premixed plasters, new or seasoned
• Resistant and seasoned cement plasters
Gypsum support (plaster, panels or plasterboards), provided that you are using a
specific primer (BENFERPRIM o STARPRIM), apply two coats of primer and apply
then BENFERFINISH within a maximum of 2-3 hours.
Do not apply to:
• Plastic coatings, paint or painted or non-absorbent substrates
• Substrates with irregularities exceeding 5 mm
• Unstable plasters or crumbly or flaky substrates
Conservation:
12 months in the original closed package in a cool dry place
Danger of harm:
no. Possible irritation of the eyes and skin for contact due to the
Flammability:no
Mixing ratio:
White, grey 29÷31% , Extra-white 34÷36%
Mixing time with whip:
3 min, let the dough rest for about 5 minutes *
Pot life:
Up to 4 hours*
Waiting time before applying the 2nd coat:
60-90 min*
Maximum thickness:
5 mm for white and grey, 3 mm for extra-white
Waiting time before applying decorative products:
21 days
Maximum grain size:
< 0,5 mm for white and grey, < 0,2 mm for extra-white
Density of hardened product:
1500 kg / m3
Adhesion on the substrate:
> 0,5 N / mm²
Flexural strength at 28 days:
> 1,5 N / mm²
Compressive strength at 28 days:
> 4,5 N / mm² Class CSII
Coefficient of resistance to the passage of steam:
μ <15
Reaction to fire (EN 13501-1: 2002):
Class A1
Thermal conductivity (val. tab. EN 1745: 2002):
λ = 0,5 W / mK
Water absorption:
Class W0
BENFER
33
ASODUR®-K900
Casting and adhesive resin
ASODUR-K900 is a two-component low viscosity, solvent free epoxy
resin with an exceptional bond to concrete, screed, stone etc.
• Very good penetration
• High adhesion strength
• Rapid hardening
• Resistant to chemicals
• Water and frost resistant
Pot life:12 min
Light foot traffic after: 4 hours
Consumption: Filling of voids
approx. 1,10 kg per volume
Remark: Safe and easy
Art. no/Colour
E/Kg
E/Package
Packing/Europallet
205070001/Transparent yellowish
48,00
48,00/ 1 kg pack
5 pcs box
Areas of application:
For producing tight secure bonds between joints and cracks in screeds and
concrete, for sealing hollow areas in bonded screeds, for repairing stone,
concrete and similar. Suitable for underfloor heating.
Product preparation:
Components A (resin) and B (hardener) are delivered in a predetermined mixing
ratio in a two compartment container. Pull out the separating clamp to allow both
components to run together. Mix the bag contents by kneading and tumbling.
Ensure that the mix is homogenous (free from striations); mixing time approx. 3
minutes. The minimum temperature during mixing should be + 15°C. Once mixed
untwist the threaded closure on the top of the bag and squeeze out the mixture.
Colour:
Viscosity:
Mixing ratio:
Density:
Minimum cure temp:
Application time:
Overcoat after:
Through cured after:
Packaging:
Cleaning:
Storage:
34
Transparent yellowish
Approx. 360 ± 50mPa s at + 23°C
100:50 parts by weight
1,10 g/cm3
+ 8°C
Approx. 12 minutes
Approx. 4 hours at + 23°C
Approx. 7 days at + 23°C
1 kg in pack with three sections, including screed clips and 1 pair
of disposable gloves in a carton with 5 x 1 kg and 1 m plastic tubing
Clean tools immediately after use with AQUAFIN-Reiniger
18 months in the original unopened packaging under cool,
dry conditions > + 10°C
BENFER
INDUFLOOR®-IB4010
Epoxy repair mortar
INDUFLOOR-IB4010 is a two component filled epoxy resin
mortar with the following properties:
• solvent free
• high compressive and flexural strength
• high resistance to mechanical loading
•
Pot life: 40 min
16-24 hours
Consumption: 2 kg/m²/mm
thickness
Remark: Hight resistance
Art. no/Colour
E/Kg
E/Package
Packing/Europallet
555015001/Grey
12,00
144,00/ 12 kg bucket
30 buckets/pallet
Method of application / Consumption
Priming: evenly apply INDUFLOOR-IB1260 to damaged areas.
Consumption: approx. 300 - 500 g/m2 per coat.
Repair of damage and voids in concrete: apply INDUFLOOR-IB4010 to the
voids over the wet primer in one application, compact and strike off level with the
surface. Consumption: approx. 2 kg/m2/mm thickness.
Production of coved fillets: In one application, apply INDUFLOOR-IB4010 to the
primed area to be coved whilst the primer is still wet, compact and strike off level
with the surface. Cove radius: approx. 3 - 5 cm.
Consumption: approx. 1,8 kg/m2 (with a cove radius of approx. 5 cm).
Basis:
Two component epoxy resin
Colour:Grey
Mixing ratio:
100:3,6 parts by weight
Pot life:
Approx. 40 minutes at + 23°C
From + 10°C to + 30°C
Traffic after:
Min. approx. 16 hours at + 23°C
Overcoat after:
From 16 hours to 24 hours at + 23°C
Fully cured:
After approx. 7 days at + 23°C
Min cure temperature:
+ 8°C
Approx. 100 N/mm2
Flexural strength:
Approx. 35 N/mm2
E-modulus:
Approx. 16,000 N/mm2
B 1,5 (concrete)
Storage:
In dry storage for 18 months in original unopened containers
BENFER
35
Flexible Cementitious Waterproofing
36
AQUAFIN®-2K/M Brochure
Flexibility in waterproofing…
AQUAFIN®-2K/M is a state of the art, highly flexible, protective and waterproof
coating, ideal for sealing and coating a wide variety of projects.
AQUAFIN®-2K/M was developed due to a demand for a truly flexible coating, not
only in terms of physical properties, but also in terms of applications and application
methods. It is a two-component product resistant to water, moisture and abrasion,
and composed of a cementitious powder and solvent free liquid. It has superior
adhesion to many substrates, including concrete, brick, masonry and some natural
stone substrates.
AQUAFIN®-2K/M is a leader in its class with up to 60% elongation, making it the
perfect solution for waterproofing substrates prone to movement and cracking.
Avantages
• Easy application
• Solvent free - Approx. mentally friendly
• Applied to moist or damp substrates
• Permanently flexible coating, elongation
up to 60%
• Resists strong hydrostatic pressure (tested up to 140 m water head, positive side)
• Withstands pedestrian and light traffic; resists mechanical wear, abrasion and de-icing salts
• Potable water approved
• Crack bridging up to 2,60 mm
Unmatched flexibility for superior crack bridging capabilities
BENFER
AQUAFIN-2K®/M Brochure
Typical Applications
AQUAFIN®-2K/M is applied on
new and old substrates to provide a
protective, waterproof coating. It is
a stand alone product that can be left
as a finished surface or easily coated
with mortars, stuccos, etc.
Typical applications include:
• Swimming pools
(tiled and untiled)
®
AQUAFIN -2K/M
• Marine and zoo
aquarium tanks
• Plaza decks and patios
• Balconies, parapet walls, planter boxes
• Mechanical rooms
• Underneath tile mortars in kitchens, bathrooms, etc.
• Water and waste water treatment tanks
• Above and below grade, interior or exterior
BENFER
37
Application
AQUAFIN®-2K/M can be applied
with a brush, roller, trowel or
appropriate compressed air spray
equipment.
The two component are simply mixed
together to create a workable
consistency for easy applications.
AQUAFIN®-2K/M has a pot life of
approximately 45 minutes at 20°C.
®
AQUAFIN -2K/M
Accessory Products
38
•ASO®-JOINT TAPE-2000/2000-S Elastomeric, highly tear resistant
waterproof tape used to repair
cracks and seal joints within the
AQUAFIN®-2K/M waterproofing
system.
• ASO®-System Fleece-02
Flexible, alkali resistant mesh, used
to reinforce the tear resistance of
AQUAFIN®-2K/M.
• AQUAFIN®-1K
Applied as first coat, under
AQUAFIN®-2K/M for negative side
waterproofing applications.
AQUAFIN®-2K/M is available in
several different colors and can be
painted or topcoated, providing
designers and applicators with
limitless possibilities for their finished
applications.
BENFER
Sample Applications
Here are a few examples of AQUAFIN®-2K/M applications.
Material application:
Finished project:
Spray application of a
swimming pool
Roller application in a
zoo exhibit
Brush application
on a dam
Trowel application
under tiles
BENFER
39
AQUAFIN®-2K/M
Two component, flexible, polymer-modified, cementitious waterproof coating
Pot life: 60 min*
Approx. 3,5-4,5 kg/m²
(depending on the stress level)
EN14891
Remark: The best one,
polyvalent
• Easy to use - can be brush, spray, roller or trowel applied
• Vapour permeable
• Waterproof - resistant to 5 bar (positive side water pressure)
• Can be tiled or left uncoated
• UV, weather and freeze-thaw resistant
• Bonds well to damp substrates without priming
• Approx. mentally friendly
• Resistant to concrete aggressive water according to DIN 4030
• Potable water approval according to DVGW W347
• Root resistance acc. to Swiss Society of Engineers & Architects:
SIA V 280 no. 11
• Conforms to EN14891
Art. no/Colour
E/Kg
E/Package
Packing/Europallet
000012020/Grey Comp.A
204278101/White Comp.A
0,94
1,20
23,50/25 kg bag Comp.A
42 Bags
42 Bags
204282001/Comp.B
(UNIFLEX-M)
8,50
85,00/10 kg bucket
Comp.B
40 Buckets
Set of 35 kg
(25 kg Comp.A Grey 10 kg Comp.B)
3,10
108,50/Set of 35 kg A+B
204281006/Set of 7 kg
(5 kg Comp.A + 2 kg Comp.B)
5,00
35,00/Set of 7 kg A+B
Colour pastes
000012070/Blue
000012074/Verde
48,00/0,6 kg can
48,00/0,6 kg can
0000120772/Beige
200701003/Light Grey
000012071/Crema Marfil
28,00/0,6 kg can
28,00/0,6 kg can
28,00/0,6 kg can
AQUAFIN-2K/M is a flexible elastomeric, 2-comp. polymer modified coating that waterproofs and protects concrete,
masonry, brick and some natural stone substrates with crack-bridging properties. AQUAFIN-2K/M has excellent adhesion
characteristics and provides a seamless system which can be left as the finished surface, or can be top-coated with tiles,
pavers, paint, or other coatings.
40
BENFER
Basis:
Mixing ratio:
Mixing time:
Density:
Pot life:
Substrate/Application temperature:
Time between re-coat:
Exposure to: Adhesion strength:
Tensile strength:
Elongation:
Crack bridging:
Water permeability:
Abrasion resistance:
Shore ‘A’:
Initial surface absorption:
Rapid chloride permeability:
Vapour diffusion resistance number:
Sd - value:
Sd - value, CO2:
Flammability class:
Comp. A
Comp.B (UNIFLEX- M)
powder cement and sand liquid polymer disp.
2,5 parts
1 part
2 - 3 min. (drilling machine min. 300 - 500 r/min)
1,5 g/cm3
Approx. 60 min. at + 23°C, 60% RH.
Approx. 20 min. at + 35°C, 65% RH
From + 5°C to + 35°C. Lower temperatures extend,
higher temperatures reduce curing times
Approx. 1,6 to 4 hours depending on climate conditions
- Rain after approx. 6 hours*
- Pedestrian traffic after approx. 1 day*
- Pressure water after approx. 7 days*
- Setting of tiles after approx. 1 day*
Approx. 1,5 n/mm2 at 28 d
4,2 N/mm2 (ASTM D 412-98a)
115% (ASTM D 412-98a)
2,60 mm (ASTM C 836:95)
Nil at 5 bar (BS EN 12390)
110 mg (ASTM D 4060:01)
Approx. 85
Nil (BS 1881 Part 208:96)
85% reduction (ASTM-C 1202.97)
Approx. 1,000 μ
Approx. 2 m
Approx. 200 m
B2 (DIN 4102 Part 1)
* at ambient temperature of +20 °C and 60% RH, for higher temperatures
and RH consult the method statement for tropical climates
BENFER
41
AQUAFIN®-RS300
Rapid hybrid waterproof membrane
• Seamless and joint free construction waterproofing and
waterproofing beneath tiles • Multi-functional
• Highly flexible crack bridging
• Self cross-linking hydraulic cure
• Rapid reactive through drying • Very low loss on drying
• After 3 hours resistant to rain and foot traffic and ready for
overcoating
• Vapour permeable, resistant to frost, UV and ageing
• Classified as resistant against highly aggressive” chemicals
acc. to DIN 4030 • Resistant to pressure
• Suitable for all load-bearing substrates conventional to
Pot life: 45 min*
construction • Easy and very smooth application
• Highly slump resistant • Can be brushed, trowelled or
Consumption: 1,50 kg/m²/mm
sprayed with suitable equipment • Solvent free
thickness in accordance to stress
• Bonds without priming to matt-damp substrates
level
•
EN14891
Remark: Rapid reactive through
drying
Art. no/Colour
E/Kg
E/Package
Packing/Europallet
204208003/Grey
204208001/Grey
7,60
7,00
76,00/10 kg Bucket (A+B)
24 buckets/europallet
Due to its reactive properties, AQUAFIN-RS300 is an efficient application as a
construction waterproofer and for waterproofing beneath tiles.
Construction waterproofing:
AQUAFIN-RS300 can be applied for waterproofing wall and floor areas, in new-build and buildings under redevelopment,
in contact with the ground where structural components are concrete or masonry work under the following conditions:
• Ground moisture/non-standing seepage water in accordance with DIN 18195 part 4
• Water not under pressure on surface areas and in wet rooms in accordance with DIN 18195, part 5
• Standing seepage water in accordance with DIN 18195, part 6
• Water under pressure in accordance with DIN 18195, part 6 (with suitable construction)
• Waterproofing against positive water pressure on the inside of container construction in accordance with DIN 18195,
part 7 (e.g. swimming pools, service water containers, effluent containers)
• Horizontal waterproofing in and beneath walls against capillary rising moisture
• The waterproofing of external walls in contact with the ground against standing seepage water and water under
pressure up to 3 m head of water including the transition zone to the concrete floor slab with high resistance to water
penetration (waterproof concrete)
• Combination waterproofing as well as transitions such as e.g. base plinth waterproofing
• Suitable for bonding protective and perimeter insulation When waterproofing containers the water must be analysed.
For the assessment of the degree of chemical attack please follow DIN 4030. AQUAFIN-RS300 is resistant up to
degree of attack “highly aggressive” (exposure class XA2).
42
BENFER
Liquid component Powder component
Basis: polymer dispersion special cement, functional fillers
Mixing ratio: 1 part by weight1 part by weight
Colour:white grey
Packaging:
20 kg combined product, 10 kg bucket 2 x 5 kg bag
10 kg combined product, 5 kg bucket 5 kg bag
Combined product
Density: approx. 1.27 g/cm³
Pot life : approx. 45 minutes*
Substrate /application temp: +5° C to +35° C
Tensile adhesion strength to DIN EN 1542:
> 1.0 N/mm²
Tensile strength to DIN 53504:approx. 1.0 N/mm² at +23° C
Elongation at break to DIN 53504: approx. 85% at +23° C
Crack bridging to DIN 14879-6 0.4 mm crack, held 24 hrs: passed
Watertightness in construction to PG MDS and AIV, (15 m WC): passed
Impermeability to negative hydrostatic pressure: 1,5 bar
Water vapour resistance factor μ with a 2 mm dry film thickness:approx. 1100
Sd value at 2 mm dry film thickness: approx. 2.5 m
Material consumption/dry film thickness:
From min. 3.0 kg/m2 / approx. 2 mm to min. 4.5 kg/m2 / approx. 3 mm, see TDS
Greater consumption must be factored in for uneven substrates.
Ready for use:
• Rainproof on surfaces to falls after approx. 3 hours*, avoid exposure to standing water
• from water under pressure after approx. 3 days*
• ready for tile installation after approx. 6 hours*
Storage:
frost free, 6 months in the
cool and dry, 6 months
original unopened containers.
Cleaning:
Clean tools with water whilst product is still fresh.
Soften dried on material with AQUAFIN-Cleanser and wash off.
BENFER
43
AQUAFIN®-2K
Two-component, flexible waterproofing slurry
Pot life: 60 min*
24 hours*
Consumption: 3,5-4,5 kg/m² in
accordance to stress level
EN14891
Remark: Water impermeble to
7 bar
• Seamless and jointless, flexible, crack bridging waterproofing
compound • Suitable for all sound conventional construction
substrates • Hydraulic binder • Rainproof after a short time period
• Approx. mentally friendly • Simple economical application
• Bonds without priming on damp substrates • Can be sprayed
with suitable equipment, brush or trowel applied • Vapour
permeable, frost and resistant to ageing • Water impermeable to
7 bar • Resistant to water aggressive to concrete in accordance
with DIN 4030 • As a tanking system beneath tiling • General
technical test certificate available • Conforms to EN14891
For the effective and assured waterproofing of ground covered
building sections e.g. concrete, masonry work etc. against ground
moisture, water not under hydrostatic pressure and water under
hydrostatic pressure (with suitable construction) as well as for
horizontal waterproofing within and beneath masonry work. It is
furthermore suited for waterproofing planted concrete cold roofs
above underground garages, pre-fabricated garages, containers,
service water containers, effluent containers and pipework as well
as effluent sludge containers. When using in containers or when
exposed to soft water with a hardness < 30 mg/l then it is imperative
that the water is analysed. •
Art. no/Colour
E/Kg
E/Package
Packing/Europallet
Grey
204248001 Comp. A
204251001 Comp. B
5,70
2,60
15,00
45,60/ 8 kg (A+B)
15,60/6 kg bag Comp. A
30,00/2 kg bucket Comp.B
32 boxes (4 bags/box)
100 buckets
Grey
000012025 Comp. A
204251006 Comp. B
133,29/ 33,33 kg (A+B)
1,00
13,00 108,29/8,33 kg bucket Comp.B
42 bags/europallet
40 buckets
Waterproofing combined with tiled finishes: For the effective and assured
waterproofing in combination with tiled finishes when longer term or frequent
impermeability to water is required e.g. in private bathrooms and kitchens, private
and public sanitary areas as well as balconies and terraces, swimming pools and
pool surrounds. Reinforce the elastic surface membrane at wall/floor junctions by
incorporating ASO-Joint-Tape-2000 or ASO-Joint-Tape- 2000-S, dependent on
the type of wet duty exposure.
AQUAFIN-1K
UNIFLEX- B
Basis:
Sand/cement
Polymer dispersion
Mixing ratio:
3 parts by weight
1 part by weight
Mixing time:
3 minutes (mixing drill 300 rpm)
Storage:
Cool and dry, 12 months
Crack bridging:
Approx. 1 mm at 2 mm dry film thickness
Coefficient of vapour diffusion resistance μ:
Approx. 1000
Density of the mixed mortar:
Approx. 1,5 g/cm3
Cleaning tools:
In the fresh state with water, dried material is difficult to remove
Loading condition/material consumption/dry film thickness:
- Ground moisture/non standing backwater:
Min. 3,5 kg/m2 = 2 mm
- Non hydrostatic water pressure:
Min. 3,5 kg/m2 = 2 mm
- Rising backwater / hydrostatic water pressure: Min. 4,5 kg/m2 = 2,5 mm
Dry film thickness:
The dry film thickness must be a minimum of 2 mm
44
BENFER
ACQUASHIELD+
Flexible, two-component mortar for waterproofing application. Grey and white versions available
• Waterproof and flexible levelling-off for cement based subbases even with uneven surfaces • Waterproof, flexible,
skimming on cement-based plasters, even if cracked
• Waterproof coating of walls in contact with the ground,
foundations and lift-shafts • Waterproofing of baths, showers,
balconies, terraces, and swimming pools before the ceramic
tiles laying • Waterproofing of water tanks • Waterproof
flexible coat on plaster-board • Conforms to EN 14891
ACQUASHIELD+ is a highly resistant cement-based two
component slurry made with fine quartz, new generation
additives (component A) and high tech synthetic polymers
in water dispersion (component B). It can be easily applied
with a roller, brush and trowel, for horizontal and vertical
application. It has been formulated and developed to protect
Pot life: 60 min*
cement-based screeds, plasters and concrete structures-including
those in contact with the ground, on terraces, balconies and
Consumption:1,50 kg/m² /mm
swimming pools - against premature ageing caused by the
thickness
action of water, salts and frost.
EN14891
Remark: Excellent quality/price
ratio
Art. no/Colour
E/Kg
E/Package
Packing/Europallet
Grey/White
000011005/Comp.A
000011011/Comp.B
1,92
1,00
5,60
48,00/25 kg (A+B)
28,00/5 kg can Comp.B
42 bags/europallet
42 cans pallet
The film formation adopted by the polymers in component B, which develops in
the product drying phase both on the surface and at depth in the internal microcavities, creates a barrier against the passage of water and the salts that may
be contained in it, and against airborne contaminants, thus providing lasting
protection against substances such as chlorides, sulphates, carbon dioxide and
sulphur dioxide, which cause the decay of concrete and metal reinforcement.
The product is especially recommended for water-proofing water tanks, and can
also be used on old substrates such as existing ceramic flooring, provided it is
clean, strong, properly anchored and free from standing water.
Consistency:
Apparent specific weight comp. A:
Specific weight of A+B mix:
Danger of harm:
Flammability:
Mixing ratio:
Consumption:
Cleaning:
Packaging:
Storage and duration:
Final performance:
Elongation at breakage:
Adhesion on concrete (7 days):
Adhesion after water:
Resistance to temperature:
Impermeability:
A+B soft, spreadable paste
1.3 Kg /dm3, comp. B: 1.1 Kg/dm3
1.8 Kg/dm3
no. Possible irritation of the eyes and skin for contact due to the cement content.
no
25 parts comp. B to 100 parts comp. A by weight
from + 10°C to + 35°C
on smooth substrate, with application thickness of 2 mm, 3 kg/m².
tools must be cleaned with a damp cloth or sponge while the product is still wet.
20 kg poly-lined bags (component A), and 5 kg plastic drums (component B).
12 months in original packs properly sealed and protected against frost, sunlight and humidity.
≥ 35%
> 1 N/mm²
> 1 N/mm² (7 days + 21 days in water)
from - 30°C to + 80°C
waterproof
BENFER
45
ACQUASHIELD
Two components, flexible waterproof coating
• Total and long-lasting protection and waterproofing of screed
on balconies and terraces.
• Waterproofing of swimming pools, baths, showers before the
installation of ceramic tiles.
• Waterproof coating on walls in contact with the ground,
foundations and lift-shafts.
• Waterproof coating of water tanks.
• Waterproofing on old ceramic floors.
• Reparation of old tar coverings
• Conforms to EN 14891
Pot life: 45 min*
Consumption: 3,5-5 kg/m²
min. thickness of 2 mm
EN14891
ratio
Art. no/Colour
E/Kg
E/Package
Packing/Europallet
Grey
000001454/Comp.A
000001525/Comp.B
2,50
1,00
7,1875
82,50/33 kg (A+B)
57,50/8 kg can Comp.B
48 bags/europallet
48 cans
Two-component mortar consisting of cements, fine aggregates with graded
particle size, special additives (component A) and synthetic polymers in aqueous
dispersion (component B). Easy to apply on both horizontal and vertical surfaces,
it offers outstanding adhesion.
The product is especially recommended to waterproof balconies, terraces and
water tanks, and can also be used on old substrates such as existing ceramic
flooring, provided it is clean, sufficiently flat, strong, properly anchored and free
from standing water.
Consistency A+B:
Soft, spreadable paste
Colour:Grey
Apparent specific weight:
Comp. A: 1,3 kg/dm3 Comp. B: 1,1 kg/dm3
Specific weight of A+B mix:
1,8 kg/dm3
Storage:
In original packs properly sealed and protected against frost,
sunlight and humidity
Duration: 12 months
Toxicity:
No. Possible irritation of skin and eyes after contact,
due to cement content
Inflammability:No
Mix ratio:
32 parts Comp. B to 100 parts Comp. A by weight
From + 10°C to + 30°C
Pot life:
45 minutes*
46
BENFER
BENFER
47
AQUAFIN®-1K-flex
One component, flexible cementitious waterproofing slurry
•
•
•
•
•
•
•
•
Seamless and jointless flexible crack-bridging waterproof system
Suitable for all load-bearing substrates usual in construction
Hydraulic setting
Simple efficient application
Can be applied by brush, trowel or suitable spray equipment
Bonds without priming to damp substrates
Vapour permeable, resistant to frost, UV and ageing
Structural waterproofing in accordance with DIN 18 195
part 2 table 8
• Low consumption just 2,3 kg/m²
Pot life: 60 min*
Consumption: 2,3 kg/m²
min. thickness of 2 mm
EN14891
Remark: One component
Art. no/Colour
E/Kg
E/Package
Packing/Europallet
000012000/Grey
4,00
60,00/15 kg Bag
42 bags/europallet
Bonded waterproofing system for tiles: for secure and effective waterproofing
beneath tiles, where impermeability to water is required for longer term to constant
water exposure e.g. in domestic bathrooms and kitchens, private and communal
washrooms, on terraces and balconies. Wall and floor junctions are reinforced
with the incorporation of ASO-Joint-Tape-2000 or ASO-Joint-Tape-2000-S.
Basis:
Fresh mortar density:
Pot life:
Substrate /application temperature:
Tear strength to DIN 53504:
Elongation at break to DIN 53504:
Crack-bridging to DIN 28052-6 (PG MDS) Vapour transmission rate μ:
Sd value:
Consumption:
Minimum wet film thickness:
Minimum dry film thickness:
Through foot traffic:
Can be covered with tiles:
Storage:
Cleaning:
48
Polymer/mortar combination
Approx. 1,3 g/cm3
Approx. 60 minutes*
> 0,5 N/mm2 after 28 days*
> 0,4 N/mm2 at +23°C
> 8% at + 23°C
Passed 0,4 mm crack maintained for 24 hours
Approx. 2300
Approx. 5,5 m
Approx. 1,15 kg/mm dry film thickness
2,5 mm
2 mm
After approx. 7 days*
Cool and dry, 6 months in the original unopened packaging.
Use opened packaging promptly
Clean tools in the fresh state with water, dried mortar
can only be removed with AQUAFIN-Cleanser
BENFER
AQUAFIN®-1K
One component mineral-based waterproof slurry
Pot life: 60 min*
Consumption: 3,5-4,5 kg/m²
EN14891
Remark: Resistant to negative
hydrostatic pressure
• Rigid waterproof slurry • Sulphate resistant • For interior and
exterior use • For wall and floor • Water impermeable
• Suitable for all load-bearing conventional building substrates
• Hydraulic cure • Easy efficient application • Can be brushed,
trowelled or sprayed with suitable equipment • Bonds to matt
damp substrates without priming • Vapour permeable, resistant
to frost and ageing • Application schedule against negative
hydrostatic pressure • Application schedule against aqueous
solutions aggressive to concrete in accordance with DIN 4030
Waterproofing of new and existing buildings in ground covered
areas against ground moisture, seepage water and water under
pressure, water pressure from the inside, retrospective internal
waterproofing against damp penetrating from the exterior as
well as a horizontal membrane within and beneath walls and in
building plinth areas.
Art. no/Colour
E/Kg
E/Package
Packing/Europallet
000012025/Grey
204248001/Grey
1,00
2,60
25,00/25 kg bag
15,60/6 kg bag
42 bags/europallet
4 bags box
Weathered or greenery covered, concrete cold roofs above underground
garages, prefabricated garages, service water containers, waste water containers
and pipes, retaining walls and sluices. For use on wall or floor surfaces and for
retrospective treatment of substrates not at risk of cracking.
When using in containers or where there is exposure to soft water with a hardness
< 30 mg CaO/I then an analysis of the water is a fundamental requirement.
Evaluation of the aggressiveness towards concrete is carried out in accordance
with DIN 4030. AQUAFIN-1K is resistant up to attack grading “highly aggressive”
(exposure class XA2).
Basis:
sand/cement, polymer modified
Density of mixed mortar:
approx. 1.85 g/cm3
Mixing:
approx. 6.7 litres water per 25 kg AQUAFIN-1K approx. 1.6 litres water per 6 kg
Substrate/application temp:
+5° C to +35° C
Water impermeability, In accordance with DIN 12390-8 28 days, 1.5 bar: passed
Impermeability to water under negative hydrostatic pressure: 1.5 bar
Impermeability to water in situ (10 m water column): passed
Adhesion strength:
> 0.5 N/mm² (ASTM D 4541:2002)
Shore hardness D:
approx. 65 (ASTM D 2240:05)
Comp. strength 28d:
approx. 15 N/mm² (ASTM C 579)
approx. 25% reduction (ASTM C 1202.97)
Nil (BS 1881 Part 208:96)
Exposure class/material consumption/dry film thickness:
• Ground moisture/water:
3,5 kg/m²/approx. 2.0 mm
• Seepage water / water under pressure:
It is necessary to apply 1.1 mm as a wet coat for every mm dry film.
Exposure *): Rainproof on surfaces to falls after approx. 8 hrs, avoid exposure to standing water, foot traffic after 1 day
Against hydrostatic pressure after 7 days
Cleaning tools:
with water whilst still fresh, difficult to remove once dried
Storage:
*at +20° C and 60% relative humidity
BENFER
49
SANIFLEX
Liquid applied, fast setting, elastomeric waterproof membrane
• Easy to apply single component
• Single application possible, reducing working steps
• Seamless waterproof membrane system
• Fast curing allows tiling on same day
• Excellent crack bridging properties
• Breathability allows release of trapped moisture
• Tiling should be done with adhesive such as: SOLOFLEX-IT,
LIGHTFLEX,BENFERFLEX C2, MONOFLEX-XL, SOLOFLEX-S1
Foot traffic after: 6 hours
Consumption: 1,2 kg/m²
at 0,8 mm dry film thickness
EN14891
ratio, rapid drying
SANIFLEX is a liquid applied, ready to use, synthetic rubber
based polymer dispersion which dries to form a seamless
elastomeric waterproof membrane. The waterproof membrane
provides a breathable yet water proof elastomeric barrier with
crack bridging properties.
Art. no/Colour
E/Kg
E/Package
Packing/Europallet
205004009/Beige
205004008/Beige
205004007/Beige
6,60
6,20
6,00
33,00/5 kg bucket
74,40/12 kg bucket
120,00/20 kg bucket
SANIFLEX is approved as the waterproof component of the German ZDB-Code of
Practice for the application of indoor & outdoor waterproofing and tiling systems.
SANIFLEX is used to waterproof wet rooms such as shower areas, bathrooms,
kitchens and sanitary areas in public and private buildings.
SANIFLEX is used to waterproof balconies and terraces beneath tiles in temperate
climate zones (without longterm frost load). SANIFLEX is suitable for fast track
job requirements and overcomes the complications associated with intricate
waterproofing details.
SANIFLEX is, however, not suitable for continuous water immersed conditions or
as a final exposed waterproof finish.
Pot life:
Tack free:
Trafficable:
Recoatable (open to tiling):
Full cure (hours):
Service temperature:
Tensile strength:
Elongation:
Crack Bridging:
Water vapour transmission (Sd):
Adhesion strength:
Tensile strength:
Elongation:
Crack Bridging:
Water permeability:
50
At + 20°C
At + 40°C
60 minutes
45 minutes
4 hours
3 hours
6 hours
4 hours
6 hours
4 hours
48 hours
36 hours
From + 5°C to + 42°C. Lower temp. extend, higher temp. reduce curing times
From - 10°C to + 45°C
2,15 N/mm2
1,05 N/mm2
114 %
86 %
> 0,75 mm at 0,8 mm dft
7-9m
1,5 N/mm2 (ASTM D 4541:2002)
9 N/mm2 (ASTM D 412-98a)
257% (ASTM D 412-98a)
2,12 mm (ASTM C 836:95)
BENFER
EASYBATH
Shower tanking system kit
• Easy to use
• Suitable for plasterboard, hardwall, plywood, timberwood
and plaster
CONTAINS:
PRIMER (ASO-Unigrund-GE)
HIGHLY FLEXIBLE PASTE (SANIFLEX)
AND FLEXIBLE JOINTING TAPE FOR 5,8 m²
PLASTIC GLOVES
PLASTIC COVER
Remark: Complete set
No.art.
E/Package
Packing/Europallet
0000009540
66,00/A box contains:
1 kg ASO-Unigrund
5 kg Saniflex
6,25 mt jointing tape
1 pair of gloves
1 plastic cover
56 boxes/europallet
EASYBATH is a complete set to waterproof the substrate before tiles application in showers, toilets, kitchens, and in the rooms
subjects to frequent washing. The waterproofing action is provided by SANIFLEX, which becomes, with the waterproofing tape, a permanent waterproofing
barrier.
ASO-Unigrund-GE primer is supplied as accessory to prepare in the best manner the substrates and should be absolutely used
on Gypsum, plaster, plasterboards and wooden boards. It provide a better adhesion on all the substrates.
EASYBATH allows to waterproof 5,8 m², which correspond to the surface of a 3 walls shower 80 x 80 cm, 200 cm high.
BENFER
51
ASOFLEX-AKB-floor
Waterproofing beneath tile and slab finishes
• Solvent free, pigmented two component polyurethane resin
• Elastic with good crack-bridging properties
• Good resistance to chemicals and brine
• Tested to EN 14891, CLASS RM 01 P
• High levels of protection against carbonation
• Impervious to chloride ions
• Self cross-linking
• Available in two colours
•
Pot life: Floor 25 min*
Foot traffic after:16 hours*
Consumption:
Approx. 1.8 kg/m²/mm
thickness
EN14891
Remark: Resistant to chemicals
Art. no/Colour
E/Kg
E/Package
Packing/Europallet
550149110/Blue RAL 5013
550149180/Grey RAL 7038
550149500/Blue RAL 5013
550149570/Grey RAL 7038
24,00
24,00
26,00
26,00
240,00/10 kg bucket
240,00/10 kg bucket
130,00/5 kg bucket
130,00/5 kg bucket
ASOFLEX-AKB-floor/ASOFLEX-AKB-wall are components of the bonded waterproofing
system DENSARE 2002. They are used as system components in accordance with
the test principles for liquid applied waterproofing materials in combination with tiled
finishes for the following areas of application/wet duty classification:
• A: Heavy duty from service water and cleaning water to walls (A1) and floors (A2)
in wet areas such as swimming pool surrounds and communal showers.
• B: Wall and floor surfaces in swimming pool tanks in interiors and exteriors.
• C: Wall and floor surfaces in industrial areas also where there is chemical exposure.
Exceptions being areas associated with materials hazardous to water in terms of LAU
areas of the German WHG (water resources act).
ASOFLEX-AKB-floor ASOFLEX-AKB-wall
Basis: 2 comp. polyurethane resin 2 comp. polyurethane resin
Colours: Blue approx. RAL 5013 Blau approx. RAL 5013
Grey approx. RAL 7038 Grey approx. RAL 7038
Grey approx. RAL 7038
approx. 1,32 g/cm3
Mixed density: approx. 1,37 g/cm3
Mixing ratio: 100 : 24 parts by weight 1100 : 23 parts by weight
Foot traffic after: approx. 16 hrs* approx. 16 hrs*
Pot life: approx. 25 mins *approx. 30–40 mins*
Overcoat after: after approx. 16 hrs*, max. 72 hrs* after approx. 16 hrs*, max. 72 hrs*
Mechanical load/chemical exposure: after approx. 7 days* after approx. 7 days*
Tensile adhesion strength:approx. 1.1 N/mm2 approx. 1.1 N/mm2
Crack bridging: 0,40 mm 0,40 mm
Shore A hardness: 90
85
Water impermeability: 3 bar 3 bar
Reaction to fire: B 2 B 2
Storage: 6 months when stored dry andfrost free in the original unopenedcontainers. For longer storage periods the efficiency of
reaction can dwindle. Storage should follow in accordance with the regulations for storing materials hazardous to watercourses.
52
BENFER
ASOFLEX-AKB-wall
Waterproofing beneath tile and slab finishes
• Solvent free, pigmented two component polyurethane resin
• Elastic with good crack-bridging properties
• Good resistance to chemicals and brine
• Tested to EN 14891, CLASS RM 01 P
• High levels of protection against carbonation
• Impervious to chloride ions
• Self cross-linking
• Available in two colours
•
Pot life: Wall 30-40 min*
Foot traffic after:16 hours*
Consumption:
Approx. 1.8 kg/m²/mm
thickness
EN14891
Art. no/Colour
E/Kg
E/Package
Packing/Europallet
550150500/Blue RAL 5013
550150570/Grey RAL 7038
550150400/Blue RAL 5013
550150470/Grey RAL 7038
26,00
26,00
28,00
28,00
130,00/5 kg bucket
130,00/5 kg bucket
70,00/2,5 kg bucket
70,00/2,5 kg bucket
ASOFLEX-AKB-floor/ASOFLEX-AKB-wall are components of the bonded waterproofing
system DENSARE 2002. They are used as system components in accordance with
the test principles for liquid applied waterproofing materials in combination with tiled
finishes for the following areas of application/wet duty classification:
• A: Heavy duty from service water and cleaning water to walls (A1) and floors (A2)
in wet areas such as swimming pool surrounds and communal showers.
• B: Wall and floor surfaces in swimming pool tanks in interiors and exteriors.
• C: Wall and floor surfaces in industrial areas also where there is chemical exposure.
Exceptions being areas associated with materials hazardous to water in terms of LAU
areas of the German WHG (water resources act).
ASOFLEX-AKB-floor ASOFLEX-AKB-wall
Basis: 2 comp. polyurethane resin 2 comp. polyurethane resin
Colours: Blue approx. RAL 5013 Blau approx. RAL 5013
Grey approx. RAL 7038 Grey approx. RAL 7038
Grey approx. RAL 7038
approx. 1,32 g/cm3
Mixed density: approx. 1,37 g/cm3
Mixing ratio: 100 : 24 parts by weight 1100 : 23 parts by weight
Foot traffic after: approx. 16 hrs* approx. 16 hrs*
Pot life: approx. 25 mins *approx. 30–40 mins*
Overcoat after: after approx. 16 hrs*, max. 72 hrs* after approx. 16 hrs*, max. 72 hrs*
Mechanical load/chemical exposure: after approx. 7 days* after approx. 7 days*
Tensile adhesion strength:approx. 1.1 N/mm2 approx. 1.1 N/mm2
Crack bridging: 0,40 mm 0,40 mm
Shore A hardness: 90
85
Water impermeability: 3 bar 3 bar
Reaction to fire: B 2 B 2
Storage: 6 months when stored dry andfrost free in the original unopenedcontainers. For longer storage periods the efficiency of
reaction can dwindle. Storage should follow in accordance with the regulations for storing materials hazardous to watercourses.
BENFER
53
ASO®-Joint-Tape-2000
Sealing tape for general requirements
• High quality composite material, expandable, tear-proof,
waterproof, water vapour permeable
• For the waterproofing of expansion and dilatation
joints in sealing layers of SANIFLEX, AQUAFIN-2K/M,
ACQUASHIELD
• For all types of surfaces in fields of construction, which are
to be tiled or for waterproofing layers which have been
skilfully prepared
Remark: Highly resistant
Art. no./Width X Lenght
E/mt
205936001/12 cm x 10 m
205936002/12 cm x 50 m
205936003/20 cm x 10 m
205936005/20 cm x 50 m
4,50
4,00
7,50
7,00
Packing/Europallet
E/Package
45,00/10
200,00/50
75,00/10
350,00/50
mt
mt
mt
mt
roll
roll
roll
roll
234
120
600
120
rolls
rolls
rolls
rolls
ASO-Joint-Tape-2000 is a new type of composite material, expandable, tensile,
stable, waterproof but allows intrusion of water vapour diffusion pores. It
guarantees the fast drying of water-containing tile adhesives and water proofing
layers. ASO-Joint-Tape- 2000 is highly resistant to aggressive substances.
ASO-Joint-Tape-2000 is a product according to the ZDB-leaflet “Instructions for the
application of waterproofing layers in composite with covering and panelling of
tiles and panels for interior and exterior
use”.
Basis:
Colour:
Thickness:
Allowance of initial movement:
Tension:
Storage:
For designed areas with:
54
Binding material = fleece - membrane - fleece
White showing SCHOMBURG logo and name
0,3 mm
Max. 30% of the joint width composite gripping
> 0,5 N/mm2
In dry and weatherproof storage for at least 5 years
Inner corners of 12 cm at 90°
Outer corners of 12 cm at 90°
BENFER
ASO®-Joint-Tape-2000 Angles 90° int/ext
Angles 90° int/ext
• For the waterproofing of expansion and dilatation joints in sealing
layers of SANIFLEX, AQUAFIN-2K/M, ACQUASHIELD
• For all types of surfaces in fields of construction, which are to
be tiledm or for waterproofing layers which have been skilfully
prepared
E/pc
E/Package
Packing/Box
205944001/12 cm 90° int
205943001/12 cm 90° ext
8,50
8,50
85,00/10 pc box
85,00/10 pc box
20
20
ASO®-Joint-Tape-2000 Prix X, ASO®-Joint-Tape-2000 Prix T
Piece X, Piece T
• For the waterproofing of expansion and dilatation joints in
sealing layers of SANIFLEX, AQUAFIN-2K/M, ACQUASHIELD
be tiledm or for waterproofing layers which have been skilfully
prepared
Remark: Higly resistant
E/pc
Piece X
2 05940001
16,00
10 pcs box
16,00
10 pcs box
Piece T
2 05941001
BENFER
E/Package
Packing/Europallet
55
ASO®-Joint-Tape-2000 Joint sleeve wall/floor
Joint sleeve wall/floor
sealing layers of SANIFLEX, AQUAFIN-2K/M, ACQUASHIELD
be tiled or for waterproofing layers which have been skilfully
prepared
56
E/pc
E/Package
Packing/Europallet
Wall
205937001/12 cm x 12 cm
4,00
100,00/25 pcs box
50
Floor
205938001/45 cm x 45 cm
10,00
250,00/25 pcs box
25
BENFER
ASO®-Joint-Tape-2000-S
Special sealing tape for extended requirements
swimming pools, park decks and soiled earth areas
• Suitable materials for the application of ASO-Joint-Tape-2000-S
are AQUAFIN-2K or ASOFLEX-AKB, depending on chemical
loading
ASO-Joint-Tape-2000-S is a new type of composite material,
expandable, with a high tensile stable, waterproof but allows
intrusion of water vapour diffusion pores. It guarantees the fast
drying of water-containing tile adhesives and water proofing
layers. ASO-Joint-Tape-2000-S is highly resistant to aggressive
substances.
ASO-Joint-Tape-2000-S is a product according to the ZDBleaflet “Instructions for the application of waterproofing layers
in composite with covering and panelling of tiles and panels for
interior and exterior use”.
Remark: Highly resistant,
expandable
E/mt
E/Package
205939002/20 cm x 50 m
205939001/20 cm x 25 m
205939003/12 cm x 50 m
11,00
11,50
7,50
550,00/50 mt roll
287,50/25 mt roll
375,00/50 mt roll
Corner 90° int.
205939006/12 cm 90° int
Maximum Width 1m
E/pc
20,00
30 pcs box
Corner 90° ext.
205939005/12 cm 90° ext
Maximum Width 1m
20,00
30 pcs box
Packing/Europallet
4 pcs box/96
8 pcs box/192
8 pcs box/192
Basis:
Colour:
Thickness:
tension:
Water permeability:
Storage:
For designated areas with:
0,45 mm-0,66 mm
> 0,5 N/mm2
From 2 m to 4 m
BENFER
57
ASO®-DB Standard
Waterproof tape
•
•
•
•
•
Remark: Waterproof, elastic
Water impermeable
Elastic
UV stabilized
Resistant to weathering
Alkali resistant
E/mt
E/Package
205987001/120 mm x 50 m
3,50
175,00/50 mt roll
Packing/Europallet
ASO-DB-Standard is used for the formation of flexible, water impermeable
movement joints and connecting joints beneath tiles within e.g. SANIFLEX,
AQUAFIN-1K-flex, AQUAFIN-2K, AQUAFIN-2K/M, AQUAFIN-RS300 and
ASOFLEX-AKB waterproof membranes. ASO-DB-Standard is easy to use and
forms an intimate bond with the above named waterproof systems. ASO-DBStandard can be used in wet duty classes A0 and B0 in accordance with the ZDB
information sheet “Bonded waterproof membranes”.
ASO-DB-Standard fulfills the requirements of the test principles of the DIBt and the
information sheet “Bonded waterproof membranes” that relate to the conditions in
wet duty classes A and C.
Basis:
polyester fabric with a thermoplastic polyvinyl chloride
(PVC) elastomer coating
Colour:
grey
Thickness:
0,62 – 0,80 mm
Bursting pressure max:
approx. 4 bar
Impermeability to water in accordance with DIN EN 1928:
≥ 1,5 bar
from -22° C to +60° C
UV resistance:
minimum 500 hours according to DIN EN ISO 4892-2
Elongation, longitudinal according to DIN 527-3:
≥ 20%
Elongation, transverse according to DIN 527-3:
≥ 80%
Chemical resistance after 7 days storage at +22° C in the following chemicals:
Hydrochloric acid:
3%
Sulphuric acid:
35%
Citric acid:
100 g/lt
Potassium hydroxide:
3%
Sodium hydroxide:
0,3 g/lt
Salt water:
20 g/lt (sea salt)
Packaging:
50 mt roll (up to a cutting point/15 m), width 120 mm
± 2 mm, centre section approx. 70 mm wide elastomer
coating, in a single box
Storage:
18 months, cool, dry, protected from sunlight and
weathering
58
BENFER
ADHESIVE JOINT SEALING TAPE
Used to seal the joints between perpendicular planes
•To prevent water infiltration in the cracks in ceramic tile and floor
covering joints • Typically applied in swimming pools, terraces,
balconies, water tanks, showers, bathrooms, kitchens and areas
that are subject to frequent washing
The Adhesive Joint Sealing Tape is applied glued to the sub-base
with simple hand pressure before applying the waterproofing
product. The Joint Sealing Tape can be placed between the first
and second application.
Remark: Easy to apply
E/mt
E/Package
000004116/100 mm x 10 m
5,00
50,00/ 10 mt roll
Packing/Europallet
Total width:
Total thickness:
Weight:
Resistance to chemical agents:
Lateral elasticity at breakage:
Resistance to peeling:
Resistance to water pressure:
Resistance to uv rays:
Shelf life:
100 mm
0,8 mm
75 gr/m
Available on request
107%
20 N/20 mm
1,5 bar
Resistant
From - 40°C to + 130°C
24 months in its original packaging BENFER
59
FIBREGLASS MESH
It is used together with ACQUASHIELD+, ACQUASHIELD,
BENFERFINISH
Fibreglass mesh for reinforcing waterproofing and finishing products.
Increases resistance and performance of mortars, even in unfavorable
environmental conditions.
Remark: Alkali resistant
E/mt
E/Package
000004110/1 m x 50 m
2,80
140,00/single
Area mass:
135 ± 5 gr/m²
Mesh size:
5 x 5 mm
Total width:
1000 mm
Total length:
50 meters
Average depth:
0,45 ± 0,04 mm
Finisher:
Resistance to alkalis
% Elongation at break:
4 ÷ 6%
Colour:White
Packages:
Single rolls with 1 meter height and 50 meters length
Duration:
24 months in its original packaging
60
BENFER
Packing/Europallet
AQUAFIN®-2K-Vlies
Safety fleece
• Spun PP fleece
• Increases the crack-bridging and tear resistance of waterproofing
produced with AQUAFIN-2K or AQUAFIN-2K/M.
Incorporated within AQUAFIN-2K or AQUAFIN-2K/M
waterproofing, primarily on:
- substrates with a high risk of cracking
- balconies, terraces and access balconies
- and placed everywhere there is a particularly high requirement for
bridging where cracks could appear subsequently.
E/mt
E/Package
Packing/Europallet
204243002/1 mt x 100 m
3,40
340,00/1mt x 100 mt roll
33 rolls
BENFER
61
Primers
STARPRIM
Primer for absorbent and non-absorbent substrates
•
•
•
•
•
•
For absorbent and non-absorbent substrates
Ready to use
Solvent free
Rapid drying
Low emissions
Overcoatable: after 15/45 min*
Consumption:100-150 gr/m2
Remark: Rapid drying,
ecologic, resistant
Art. no./Colour
E/Kg
E/Package
Packing/Europallet
000009571/Blue latex
9,00
10,00
11,00
90,00/10 kg can
50,00/5 kg can
22,00/2 kg can
36 cans/europallet
75 cans/europallet
100 cans/europallet
Technical features: STARPRIM is a Primer based on special styrene butadiene
polymer dispersion, designed to obtain a perfect adhesion to many kind of
substrates, absorbent and non-absorbent.
Application field: STARPRIM is used as a primer to improve the adhesion to
absorbent and non-absorbent substrates prior to the installation of ceramic
finishes with cement-based or dispersion-based SCHOMBURG thin or mid-bed
adhesives. STARPRIM reduces the porosity of the substrate and protects moisture
sensitive substrates from the water in cement-based adhesives. Suitable for use
on existing tiled finishes, hydraulically setting cement, cement-lime renders and
gypsum plasters, gypsum fibre boards, moisture resistant plasterboard, brickwork,
aerated concrete, lime-sand blocks, cement, calcium sulphate and poured asphalt
screeds, levelling compounds, natural stone, steel and glass.
Colour:
Blue latex
Shelf life:
12 months in the original unopened packaging
Ph:9
Density:
approx. 1.00 g/cm³
Overcoatable:
after 15/45 min*
+5° C to +40° C
-30° C to +90° C
Storage:
Frost free
*at +23°C e 65% RH.
62
BENFER
Primers
BENFERPRIM
Primer for absorbent substrates
•
•
•
•
•
•
For absorbent substrates
Ready to use
Solvent free
Rapid drying
Low emissions
Consumption:100-200 g/m²
Remark: Rapid drying
Art. no/Colour
E/Kg
E/Package
Packing/Pallet
000001521/White
000009520/White
000009560/White
4,00
4,80
6,00
100,00/25 kg can
24,00/5 kg can
6,00/1 kg pot
32 cans/pallet
100 cans/pallet
12 pots box
BENFERPRIM is a Primer based on special styrene butadiene polymer dispersion,
designed to consolidate weak and dusty substrates and to offer, once dry, a good
surface to Benfer Schomburg tile adhesives. It improves surface hardness and reduces
water absorption to avoid a too fast water loss to the mortar applied on it.
Once dry, it offers a good surface to Benfer Schomburg tile adhesives, self levelling
and waterproofing.
Suitable for use on all absorbent substrates common in building, such as cementlime renders, gypsum plasters, gypsum fibre boards, moisture resistant plasterboard,
brickwork, aerated concrete, lime-sand blocks, cement, calcium sulphate and poured
asphalt screeds, levelling compounds, natural stone, wooden boards.
Appearance:
White latex
Conservation:
Protected from frost
Duration:
Toxicity:No
Inflammability:No
Density:
1,06 kg/dm³
BENFER
63
Primers
ASO®-Unigrund-S
Rapid special adhesion promoting primer
• Ready to use • Solvent free • Rapid drying
• For absorbent and non-absorbent substrates
• For interior and exterior use • Low emissions
Consumption:50-100 gr/m2
Foot traffic after: min. approx.
12 hours at +23° C
ASO-Unigrund-S is used as a primer to improve the adhesion to
absorbent and non-absorbent substrates prior to the installation
of ceramic finishes with cement- based or dispersion-based
SCHOMBURG thin or mid- bed adhesives. ASO-Unigrund-S
reduces the porosity of the substrate and protects moisture sensitive
substrates from the water in cement-based adhesives. Suitable
for use on existing tiled finishes, hydraulically setting cement,
cement-lime renders and gypsum plasters, gypsum fibre boards,
moisture resistant plasterboard, brickwork, aerated concrete,
lime-sand blocks, cement, calcium sulphate and poured asphalt
screeds, levelling compounds, natural stone, steel and glass.
ASO-Unigrund-S is suitable for use in interior rooms in accordance
with the AgBB evaluation scheme (Commission for the health
related evaluation of construction products) and the French VOC
by-law.
Art. no/Colour
E/Kg
E/Package
Packing/Europallet
204201002/ Pink
18,00
90,00/5 kg can
140 cans/Europallet
Basis:
Colour:
Density:
Packaging:
Ready for tiling:
Cleaning agents:
Storage::
Consumption::
Substrate:
64
styrene butadiene
pink – violet
approx. 1.33 g/cm3
1 kg, 5 kg
5° C to +25° C
-20° C to +80° C
on non-absorbent substrates after complete through drying (approx. 1 hour at +15° C),
on absorbent substrates as soon as the ASO-Unigrund-S surface is dry
water, remove dried on material with AQUAFIN-Cleaner
Frost free, min. 12 months in the original unopened container.
approx. 50 to 100 g/m2 dependent on the porosity of the substrate
(Note: Technical application trials have shown that the consumption is 220 g/m2
when used on old tiled finishes.)
substrates must be dry, sound, load-bearing and free from contamination, dust and
separating agents.
BENFER
Primers
ASO®-Unigrund-K
Primer concentrate solvent free
• Very low consumption and multi-purpose application
• Colourless
It’s a primer for porous and lightly abraded substrates such as
render/plaster, concrete screed etc. prior to the application of
waterproofing, self levelling or tile adhesives.
Consumption: 30-80 g/m²
depending on the absorption
of the support
Remark: Low consumption
Art. no
E/Kg
E/Package
Packing/Europallet
205535006
205535001
7,00
9,00
35,00/5 kg can
9,60/1 kg pot
140 cans/pallet
24 pots box
Appearance:
White latex
Conservation:
Protected from frost
Duration:
Toxicity:No
Inflammability:No
Density:
1 kg/dm³
BENFER
65
Primers
ASO®-Unigrund-GE
Ready to use primer
• Rapid drying
• Universal application
• Resistant to water and alkalis
• Solvent free
ASO-Unigrund-GE reduces the absorption of substrates, binds
surface dust, consolidates, prevents rapid water loss from
levelling compounds.
Consumption: 200 g/m²
Art. no/Colour
E/lt
E/Package
Packing/Europallet
205536006/ Green
205536001/ Green
5,20
8,00
26,00/5 lt can
8,00/1 lt pot
100 cans/europallet
12 pots/box
ASO-Unigrund-GE is used for priming absorbent and lightly sanded substrates
e.g. gypsum-based construction materials (plaster, interlocking gypsum
slabs, boards, screeds), concrete, masonry work and similar. Suitable as an
adhesion promoter for surface applied waterproof membranes (e.g. SANIFLEX,
AQUAFIN-2K/M), thin-bed adhesives such as LIGHTFLEX, MONOFLEX-XL,
SOLOFLEX, AK7P, UNIFIX as well as wall and floor levelling compounds such
as SOLOCRET-15, SOLOPLAN-30 and ASO-NM15. It is also suitable for
exterior use.
Basis:
Colour:
Specific gravity:
Cleaning:
Storage:
Packaging:
Consumption:
66
acrylate dispersion
coloured green
+5° C to +30° C
1,0 g/cm3
whilst still fresh, with water
frost free, 15 months in the original unopened packaging.
1, 5, 10, 25, 210 and 1,000 litre containers
approx. 200 g/m²
BENFER
BENFER
67
Primers
ASODUR-SG3
Moisture blocking two-component epoxy primer
•
•
•
•
•
•
•
Solvent free
Low viscosity
Moisture blocking
Low water vapour emission
Very low WDD value (to DIN EN ISO 7783-1) = 0,2 g/m2 x d
Water and frost resistant
Resistant to dilute alkalis, acids, water-based salt solutions and
lubricants.
Pot life: approx. 35 min at 23°C
Consumption: 400-670 gr/m²
Remark: full protection
Art. no/Colour
E/kg
E/Package
Packing/Europallet
205049001/Transparent
26,00
30,00
260,00/10 kg can
90,00/3 kg can
36 cans/europallet
70 cans/europallet
Technical characteristics:
ASODUR-SG3 is a two-component epoxy resin solvent free moisture tolerant.
It bond very well to damp concrete and have a very low WDD value.
ASODUR-SG3 is used:
• as a moisture blocking primer on cementitious surfaces, ceramic finishes, multilayered wood boards and similar, that are to be coated with ASOFLOOR
systems
• for the production of levelling and key coats, as a substrate preparation for
coatings.
Basis:
Colour:
Viscosity:
Mixing ratio:
Mix density:
Pot life:
Traffic after:
Ready for overcoating:
Fully cured:
Curing temp. (Material/substrate):
Cleaning:
Packaging:
Storage:
68
two-component epoxy resin
transparent
approx. 600 ± 80 mPA/s at +25 °C
approx. 1.09 ± 0.02 g/cm3
approx. 35 mins at +23 °C
min. approx. +10 °C, max. +35 °C
min. approx. 12 hrs at +23 °C
after approx. 16 hrs, up to a max. 7 days at +23° C/50% RH
after approx. 7 days at +23 °C
+10 °C to +30 °C
B 1.5 (Concrete failure)
Thoroughly clean tools immediately after use with AQUAFIN-Cleanser.
3 kg,10 kg. Components A and B are delivered at a predetermined mixing ratio.
frost-free, 24 months when stored dry and cool,
above +10 °C in the original unopened containers.
BENFER
Primers
ASODUR-SG2
Special primer
• Two component, low solvent, moisture tolerant, water vapour
barrier.
• Due to its high density, ASODUR-SG2 displaces the water from
the surface capillaries of concrete substrates and acts as a
barrier to oil rising through capillary action.
• Forms a very good bond to damp concrete substrates.
• High Sd value (water vapour barrier).
• Prevents penetration of radon.
Pot life: 60 min at 23°C
30 min at 30°C
Consumption: 600-1000 gr/m²
Remark: water vapour barrier
Art. no
E/kg
E/Package
Packing/Europallet
205655001
22,00
330,00/15 kg can
42 cans/europallet
• As a special priming treatment for oil contaminated but previously cleaned
concrete substrates
• As effective protection against the formation of osmosis bubbles when there is
moisture penetrating from the rear
• As a capillary breaking grout to the pool edge with high level water tables, up
to 1:1 filled with 0.1– 0.6 mm quartz sand.
• As a priming treatment for concrete/bonded screeds that are still damp, which
are to receive floor coverings such as PVC, linoleum, carpet, parquet, tiles etc.
Please refer to the advice section.
• As a primer for SOLOPLAN-30
Basis:
Viscosity:
Mixing ratio:
Density:
Pot life:
Traffic after:
Ready for overcoating:
Fully cured:
Curing temp.(Material/substrate):
Flexural strength:
Cleaning:
Cleaning:
Storage:
two-component epoxy resin
70 s in a 4 mm DIN standard cup
1.86 g/cm3
60 minutes at +23° C, 30 minutes at +30° C
min. approx. +8 °C, max. +30 °C
min. approx. 12 hrs at +23 °C
after approx. 12-24 hrs, at +23° C/50% RH
after approx. 7 days at +23 °C
+10 °C to +30 °C
approx. 80 N/mm2
approx. 30 N/mm2
concrete 1.5
frost-free, 24 months when stored dry and cool,
above +10 °C in the original unopened containers.
BENFER
69
High-performance adhesives for ceramic and stable natural stone laying
SOLOFLEX-S1
Flexible adhesive, application thickness up to 20 mm, thixotropic or flow-bed adhesive
• Flexible, multipurpose adhesive, can be used as thixotropic or
flow bed, application thickness up to 20 mm
• Multipurpose adhesive, can also be used as a flow-bed
adhesive • Sag resistant, very good application properties
• Long open time • Extremely easy to use • For heated supports
• Dust reduced
• Conform to European Norms EN 12004, C2 TE S1
• High yield • For interior and exterior use •
Pot life: 3 hours*
Consumption:
at least 1,3 kg/m²
EN 12004 C2 TE S1
‍ emark: Ideal for porcelain tiles,
R
can also be used as a flow-bed
adhesive, Dust reduced
SOLOFLEX-S1 is a modern flexible adhesive consisting of high
strength cements, graded particle size aggregates, synthetic
resins and special additives. It has been formulated and
developed for rapid, reliable installation of porcelain tile and
ceramic tile on cement based screeds, non-absorbent substrates
and onto substrates subject to slight dimensional variation. The
high resistance to vertical sliding allows to tile from the top down.
Art. no/Colour
E/Kg
E/Package
Packing/Pallet
000012511/Extrawhite
000012513/Extrawhite
0,94
0,94
23,50/25 kg bag
23,50 /25 kg bag
42 bags/europallet
60 bags/pallet
000012512/Grey
000012514/Grey
0,90
0,90
22,50/25 kg bag
22,50 /25 kg bag
42 bags/europallet
60 bags/pallet
Thanks to its composition, SOLOFLEX-S1 can be mixed with a higher water percentage for an easier pocket free application
on floor of big tiles, without the need to butter the back of the tiles and slabs.
Laying of every kind of porcelain tiles, thick, thin, big or small and natural stones (water stable), on:
• Interior and exterior wall and floor
• Heavy duty areas
• Public and Private Swimming Pools
• On Schomburg waterproofing cement based membranes
• On old wall and floor tiles
Substrate
• Concrete
• Cement-based screeds, standard or heated with water system or electric resistance
• Cement-based plaster
• Flexible waterproofing membranes made up of cement and polymers (AQUAFIN-2K/M)
• Cement based blocks
Inside only
• Fluid cement-based screeds (prior application of an appropriate primer if demanded), standard or heated with water system
• Fluid anhydrite-based screeds (prior application of an appropriate primer), standard or heated with water system
• Old ceramic tiles (prior application of an appropriate primer)
• Standard or waterproof plasterboard
• Elastomeric waterproofing membranes (SANIFLEX)
• Wooden boards (prior application of an appropriate primer)
70
BENFER
Maximum sizes
• Interior floors up to 10.000 cm2
• Exterior floors up to 3.600 cm2
• Interior and exterior wall coverings up to 3.600 cm2
See the choice table to verify size limits by tile/substrates characteristics
Consumption:
Notched trowel
Consumption kg/m²
4 mmapprox.1,8
8 mmapprox. 3,5
10 mm
approx. 4 - 5
20 mm
approx. 7
Basis: cement, additives (polymer modified)
Colour: extra white, cement grey
Bulk density: approx. 1,37 kg/liters
from + 5° C to + 35° C
Water demand: 32 %, 8 liters/ 25 kg bag
Water demand as flow-bed adhesive:
38-40 %, 9,5-10 liters/ 25 kg bag
Pot life:
approx.3 hours*
Open time:
approx.30 minutes*
Grout after:approx.12 hours*
Traffic after:
12 hours*
Final hardening on dry support:
3-7 days*
Cleaning: clean with water immediately after use
Conform to:
DIN EN 12004, C2 TE S1
Consumption:
at least 1,3 kg/m²
Storage:
in the original unopened packaging in a dry and cool place.
Shelf life:
12 months from the date printed on the packaging;
* at +23° C and 65% relative humidity
BENFER
71
BENFERFLEX C2
Fibre reinforced flexible adhesive
• High flexibility • No vertical sliding • Ideal for exterior
application • Ideal for heated screeds • Ideal for porcelain
stoneware • Ideal for large sizes • Application thicknesses up
to 15 mm • Tested in accordance with EN 12004, C2 TE S1
•
Certificat CSTB n° 151 MC 157.
Classification :C2-TE S1
Pot life: 3 hours*
Grout wall/floor after: 12 hours*
EN 12004 C2TES1
Remark: Ideal for porcelain,
application thickness up to 15 mm
Technical features: BENFERFLEX C2 is a thixotropic flexible
adhesive consisting of high strength cements, graded particle
size aggregates, synthetic resins and special additives. It has
been formulated and developed for rapid, reliable installation
of porcelain tile and ceramic tile on cement based screeds,
non-absorbent substrates and onto substrates subject to slight
dimensional variation. The high resistance to vertical sliding
allows to tile from the top down.
Art. no/Colour
E/Kg
E/Package
Packing/Pallet
000001026/White
000001027/White
000001031/White
000001028/White
1,02
1,02
1,02
1,34
25,50/25 kg bag
25,50/25 kg bag
20,40/20 kg bag
6,70/5 kg bag
45 bags/europallet
60 bags/pallet
56 bags/pallet
80 bags/pallet
000001059/Grey
000001055/Grey
000001058/Grey
0,98
0,98
1,30
24,50/25 kg bag
24,50/25 kg bag
6,50/5 kg bag
45 bags/europallet
60 bags/pallet
80 bags/pallet
Laying of porcelain, ceramic tiles and water stable natural stones on:
• Public and Private Swimming Pools
72
BENFER
Maximum sizes
Storage: In the original unopened packaging in a dry and cool place.
Shelf life: Grey version: 12 months from the date printed on the packaging;
pursuant to EU directive 2003/53/CE, we inform that the expiry dated refers to the efficacy of the reducing agent in relation to Chromium VI Salts. White version: 12 months.
Colour:
Toxicity:
grey/white powder
The cement content of the product may cause irritation to the eyes and skin.
We suggest to adopt appropriate protections.
Inflammability:
no
Mixing ratio:
27 parts water to 100 parts powder by weight
Water demand:
6,75 litres per bag of 25 kg bag/1,35 litres per bag of 5 kg
Maximum thickness application:
15 mm
Consumption:
by 3,5 to 8 kg m2
from + 5° C to + 40° C
Pot life:
3 hours*
Open time at 23° C and 50% R. H.: 30 minutes*
Walkability on dry support at 23°C: 12 hours*
14 days*
by-30° C to +80°C
Final performance:
tested in accordance with EN 12004 CLASS C2TE S1
BENFER
73
LIGHTFLEX
Universal flexible adhesive - especially light with high yield
• High yield • Easy and smooth application • High initial
grab • Good sag resistance • Variable, use also as a flowbed adhesive • For interior and exterior use • Fulfils the
required criteria for a “flexible adhesive” • Tested to DIN EN
12004, C2 TE S1 • Dust Reduced •
Certificate CSTB n° 151 MC 389.
Classification : C2-TE S1
Pot life: 2 hours*
Grout wall/floor after:
12 hours*
Consumption: see table
EN 12004 C2TES1
Remark: Ideal for porcelain tiles,
used as flexible adhesive,
Dust Reduced
Technical features: LIGHTFLEX is a thixotropic , powder
adhesive, consisting of cements, graded particle size
aggregates, synthetic resins and special additives.
It has been formulated and developed for rapid and reliable
installation of all ceramic materials with minimal effort.
The high resistance to vertical sliding allows to tile from the
top down.
Art. no/Colour
E/Kg
E/Package
Packing/Europallet
000012011/White
000012010/Light grey
2,00
2,00
30,00/15 kg bag
30,00/15 kg bag
42 bags/europallet
42 bags/europallet
Consumption:
Approx. 1,3 kg/m²
with an notched trowel 6 mm
Approx. 1,8 kg/m²
Approx. 2,2 kg/m²
Approx. 1,9 kg/m²
with an 8 mm flowline trowel
Approx. 2,7 kg/m²
with an 10 mm flowline trowel
Approx. 3,2 kg/m²
with a 12/20 mm medium bed trowel
74
BENFER
• Public and private swimming pools
Suitable as an adhesive for lightweight construction boards e.g. composed of extruded polystyrene.
Uneven wall or floor substrates can be levelled out with LIGHTFLEX up to a thickness of 15 mm before starting tiling.
Maximum sizes
Storage: In the original unopened packaging in a dry and cool place.
Shelf life: Grey version:12 months from the date printed on the packaging; pursuant to EU directive 2003/53/CE, we inform
that the expiry dated refers to the efficacy of the reducing agent in relation to Chromium VI Salts. White version: 12 months.
Basis: lightweight fillers, cement, additives (polymer modified)
Colour: extra white, cement grey
Bulk density: approx. 0.8 kg/l
from + 5° c to + 25° c
Pot life:2 hrs*
Open time : approx. 30 mins*
Grout after:approx. 12 hrs*
Foot traffic after :approx. 12 hrs*
Full service conditions :after 7 days*
Cleaning: clean with water immediately after use
*) These values relate to +20° C and 65% relative humidity.
BENFER
75
MONOFLEX-XL
Modern flexible adhesive with high yield
•
•
•
•
•
•
•
•
•
Very high yield
Deformable
Long open time
Easy to use
For heated substrates
Variable, use also as a flow-bed adhesive
High slump resistance yet the best application properties
Tested in accordance with DIN EN 12004, C2 TE S1
Pot life: 2 hours*
Grout wall/floor after: 12 hours*
EN12004 C2 TE S1
Remark: Ecologic, fast, cost
reduced
Art. no/Colour
E/Kg
E/Package
Packing/Europallet
000012013/Grey
000012014/White
1,10
1,10
27,50/25 kg bag
27,50/25 kg bag
42 bags/europallet
42 bags/europallet
Consumption:
Approx. 1,6 kg/m²
Approx. 2,1 kg/m²
Approx. 2,6 kg/m²
76
BENFER
Maximum sizes
• Interior floors up to 10.000 cm²
• Exterior floors up to 3.600 cm²
• Interior and exterior wall coverings up to 3.600 cm²
Technical features: MONOFLEX-XL is a thixotropic flexible adhesive consisting of high strength cements, graded particle
size aggregates, synthetic resins and special additives. It has been formulated and developed for rapid, reliable installation
of porcelain tile and ceramic tile on cement based screeds, non-absorbent substrates and onto substrates subject to slight
dimensional variation. The high resistance to vertical sliding allows to tile from the top down.
• Public and private swimming pools
Basis: Colour: Application temperature: Pot life :
Open time : Grout : Foot traffic :
Full service conditions: Cleaning: Packaging: Storage: sand, cement, additives (polymer modified)
cement grey, white
+5° C to +25° C
approx. 2 hrs*
> 30 mins*
in floor areas after approx.12 hrs*
in wall areas after approx. 12 hrs*
after approx. 12 hrs*
after approx. 7 days*
clean with water immediately after use
25 kg bag with PE liner
dry, 12 months in the original unopened packaging.
BENFER
77
C2+
Highly performance flexible adhesive
Pot life: 3 hours*
Grout after: 12 hours*
Consumption: 3,5 - 5 kg/m²
EN 12004 C2TES1
Remark: Ideal for laying large
size ceramic tiles
• Ideal for laying large size ceramic tiles from top to bottom even
with heavy tiles
• Ideal for exterior application
• Ideal for the application of heavy mosaics
• Ideal for the application of thick floor coverings
• Ideal for porcelain stoneware
• Ideal for large sizes
• Elevated flexibility
• Can be spread in a layer of up to 15 mm
• Extended open time
•
Art. no/Colour
E/Kg
E/Package
Packing/Europallet
000011090/White
000011050/Grey
1,20
1,20
24,00/20 kg bag
24,00/20 kg bag
56 bags/europallet
56 bags/europallet
Highly flexible and tixotropic fibro reinforced adhesive in white or grey. Elevated
content of special polymers of a new generation, frost proof and zero vertical
sliding. It can also be used to lay large size ceramic tiles from top to bottom
even on smooth and non-absorbent sub bases. Ideal for overlapping and
large sizes, even on heated screed with warm water or electrical resistance.
Adhesive classification: EN 12004 C2 TE S1
Consistency:
Very doughy
Colour:
Grey and white
Storage:
In the original unopened packaging, in a dry place
Duration:
12 months
Toxicity:
due to the cement content
Inflammability:No
Maximum application depth: 15 mm
Pot life:
3 hours*
Open time:
30 minutes*
Walkover time with caution for grouting
on dry supports:
12 hours*
Final hardening on dry supports:
14 days*
Conforms to:
EN 12004 CLASS C2TE S1
78
BENFER
MONOFLEX-FB-IT
Flow bed flexible adhesive, rapid setting
Pot life: 30-45 minutes*
EN 12004 C2 FG S1
Remark: Approved for rooms P4
and P5
• Large sizes without buttering the back of the tiles • Size up
to 100 x 100 cm even on heated screed • Approved for
rooms P4 and P5 • Renovation on old tiles without primer
• Quick setting, for interior and exterior • Dust reduced
• Conforms to: EN 12004 CLASS C2FG S1 •
MONOFLEX-FB-IT is a flexible adhesive consisting of high strength
cements, graded particle size aggregates, synthetic resins
and special additives. It has been formulated and developed
for rapid, reliable installation of porcelain tile and ceramic tile
on cement based screeds, non-absorbent substrates and onto
substrates subject to slight dimensional variation.
MONOFLEX-FB-IT is suitable for use as a thin and medium bed
adhesive for the virtually void free installation, when under time
pressure, especially of profiled or large format tiles and in heavy
duty areas. With MONOFLEX-FB-IT a virtually void free adhesive
bed is possible in one operation; buttering the backs of the tiles
with the adhesive can be omitted when using suitable fixing
techniques.
Art. no/Colour
E/Kg
E/Package
Packing/Europallet
000012520/Grey
1,40
35,00/25 kg bag
42 bags/europallet
Maximum sizes
• Interior and exterior floor
Basis:
Colour:
Filler configuration:
Bulk density:
Pot life:
Open time:
Grout after:
Foot traffic after:
Full loading/service:
Testing:
Aggregates, cement, additives (polymer modified)
Cement grey
Fine sand
1,5-1,6 kg/dm³
Within 30 to 45 minutes*
Approx. 20 minutes*
Approx. 4 hours*
Approx. 4 hours*
Conforms to DIN EN 12004 C2 FG S1
*at +20°C, 65% relative humidity
BENFER
79
LEADERFLEX RAPIDO
Highly flexible adhesive,rapid setting
Pot life: 30 minutes*
EN 12004 C2FTE S1
Remark: Ecologic, fast
• Ideal for the application on wood composites
• Quick setting
• Conforms to: EN 12004 CLASS C2FTE S1
•
Special extra-white or grey flexible adhesive with high special
polymer content, thixotropic, frost proof. Rapid hardening and
setting. For laying natural stone and porcelain tile, on floor and
wall even with smooth non-absorbent surfaces. Ideal for laying
on wooden boards, chipboard, plywood and on old ceramic
tiles, ideal for large sized tiles, also on heated screed.
Art. no/Colour
E/Kg
E/Package
Packing/Europallet
000001085/Grey
1,50
1,30
30,00/20 kg bag
26,00/20 kg bag
56 bags/europallet
56 bags/europallet
Maximum sizes
Appearance:
Extra-white / grey powder
Storage:
In the original pack if properly sealed and protected
from humidity
Duration:
12 months
Toxicity:
Inflammability:No
Coverage: From 3,5 to 5 kg/m²
Pot life:
30 minutes*
Open time:
15 minutes*
on dry supports:
2 hours*
14 days*
Conforms to:
EN 12004 CLASS C2F TE S1
80
BENFER
BENFERFLEX RAPIDO
Highly flexible adhesive,rapid setting
EN 12004, C2 F TE S1
Remark: Ecologic, fast
• Quick setting
• Conforms to: EN 12004 CLASS C2FTE S1
• Suitable for the application on wood composites
•
Special extra-white or grey flexible adhesive with high special
polymer content, thixotropic, frost proof. Rapid hardening and
setting. For laying natural stone and porcelain tile on floor and
wall even with smooth non-absorbent surfaces. Ideal for laying
on old ceramic tiles, ideal for large sized tiles, also on heated
screed. Suitable for application on wooden boards, chipboard,
plywood.
Art. no/Colour
E/Kg
E/Package
Packing/Europallet
000001081/White
000001088/White
1,40
1,70
28,00/20 kg bag
8,50/5 kg bag
56 bags/europallet
120 bags/pallet
000001080/Grey
000001089/Grey
1,20
1,50
24,00/20 kg bag
7,50/5 kg bag
56 bags/europallet
120 bags/pallet
Maximum sizes
Appearance:
White / grey powder
Storage:
Duration:
12 months
Toxicity:
Inflammability:No
Pot life:
30 minutes*
Open time:
20 minutes*
on dry supports:
2 hours*
14 days*
Conforms to:
EN 12004 CLASS C2F S1
BENFER
81
BENFERFLEX N
Flexible adhesive
•
•
•
•
•
•
•
Ideal for exterior application
Ideal for porcelain stoneware
Ideal for large sizes
Elevated flexibility
Can be spread in a layer of up to 10 mm
Also on heated screed
Pot life: 2 hours s*
EN 12004 C2 E
Remark: Extended open time,
ecologic
Art. no/Colour
E/Kg
E/Package
Packing/Europallet
000001024/White
000001025/White
0,86
0,86
21,50/25 kg bag
21,50/25 kg bag
45 bags/europallet
60 bags/pallet
000001053/Grey
000001054/Grey
0,82
0,82
20,50/25 kg bag
20,50/25 kg bag
45 bags/europallet
60 bags/pallet
White and grey flexible adhesive with high special polymer content, thixotropic,
frost-proof. For laying porcelain tiles and single-fired tiles, flooring and walls even
with smooth non-absorbent surfaces. Ideal for overlapping and large sizes, even
on heated screed.
Consistency:
Very doughy
Colour:
White or grey
Storage:
Duration: 12 months
Toxicity:
Inflammability:No
Pot life:
2 hours*
Open time:
30 minutes*
on dry supports:
12 hours*
14 days*
Conforms to:
EN 12004 CLASS C2E
*at +20°C, 65% relative humidity
82
BENFER
BENFERGRES
Special white and grey adhesive with synthetic resins, frost-resistant, thixotropic
• Zero vertical sliding
• Also on heated screed
• Ideal for exterior application
•
Pot life: 2 hours*
EN 12004 C2TE
Remark : No vertical sliding on
wall application
Art. no/Colour
E/Kg
E/Package
Packing/Europallet
000001021/White
000001022/Grey
0,84
0,80
16,80/20 kg bag
16,00/20 kg bag
56 bags/europallet
56 bags/europallet
BENFERGRES is a flexible adhesive consisting of high strength cements, graded
particle size aggregates, synthetic resins and special additives. It has been
formulated and developed for rapid, reliable installation of porcelain tile and
ceramic tile on cement based screeds, non-absorbent substrates and onto substrates
subject to slight dimensional variation. The high resistance to vertical sliding allows
to tile from the top down.
Laying of porcelain, ceramic tiles and water stable natural stones on: interior and
exterior wall and floor, heavy duty areas
Consistency:
Very doughy
Colour:
White or grey
Storage:
Duration:
12 months
Toxicity:
Inflammability:No
Pot life:
2 hours*
Open time:
30 minutes*
on dry supports:
12 hours*
14 days*
Conforms to:
EN 12004 CLASS C2TE
BENFER
83
SOLOFLEX-IT
Flexible thin set tile adhesive
•
•
•
•
•
•
•
•
•
•
High-quality polymer-modified
Extra white
Thin bed adhesive according to EN 12004 C2 TE
Resistant to water and freeze thaw changes
Easily workable
Can be applied in a layer up to 15 mm thick
Suitable for wall and floor areas
Ideal for porcelain
Suitable for interior and exterior use
Pot life: 3 hours*
Traffic after: 24 hours*
EN 12004 C2 TE
Remark: Extra white, ideal for
porcelain
Art. no/Colour
E/Kg
E/Package
Packing/Europallet
000012510/Grey
0,90
0,90
22,50/25 kg bag
22,50/25 kg bag
42 bags/europallet
42 bags/europallet
SOLOFLEX-IT is used as a thin tile adhesive for ceramic coatings (even fine
earthenware), mosaic, clinker, and brick tiles. For the fixing of natural stones the
properties of the material have to be regarded.
SOLOFLEX-IT is suitable for secure applications on all surfaces according to DIN
18 157 part. 1 as for masonry, plaster, gas concrete, brick work and gypsum
board as well as heated screed applications. Suitable as adhesive for light
weight boards made of wood-wool, gypsum plaster, gypsum fibre, or estrude
polystyrene. SOLOFLEX-IT can also be used as a system adhesive in conjunction
with AQUAFIN-waterproofing layers in swimming-pools.
Basis: Colour: Bulk density: Application temperature: Pot life:
Open time: Traffic after: Grout after: Cleaning: Consumption: Storage: Delivery: 84
Sand/cement (plastic modified)
Cement grey/Extra white
approx. 1.37 kg/l
+5° C up to +25° C
approx. 3 hours*
approx. 30 minutes*
after 24 hours*
In green condition with water
depending on surface and tiles, 1,5-5kg/m2
dry, at least 12 months, use opened bags promptly.
25 kg bag with PE inlet
* at +20° C and at 65% relative humidity
BENFER
CEMLATEX 600
Synthetic latex for the preparation of mortars based on cement with high adhesive power
• Transforms a good adhesive into a superior quality adhesive
• Increases the field of application of adhesives
• Gives adhesives an extremely high flexibility
• Ideal for large size applications
• Gives very high adhesion and elasticity to cement-based mortars
• Permits long lasting concrete pouring
• Reduces the absorption of water
Remark: Versatile
Art. no/Colour
E/Kg
E/Package
Packing/Europallet
000001505/White latex
5,00
6,20
25,00/5 kg can
6,20/1 kg bottle
100 can/europallet
12 bottles box
Consumption:
As an additive for cement based adhesives:
5 kg of Cemlatex 600 with 25 kg of powder adhesive
As an additive for cement mortars:
from 2 to 5 kg of Cemlatex 600 for 25 kg of cement
CEMLATEX 600 is a polymeric dispersion to be used as an additive for cementbased mortars in order to improve their mechanical resistances, adhesion,
elasticity, workability and impermeability. It is to be used as a partial replacement
of the mixing water in quantities that may vary depending on the purposes of use
and expected results.
Aspect:
White latex
Storage:
dry, at least 12 months, use opened bags promptly.
Toxicity:No
Inflammability:No
pH:10
Density:
1,05 kg/dm3
Application temperature: + 5°C to + 40°C
Temperature resistance: from - 30°C up to + 90°C
BENFER
85
BENFERFIX RAPIDO
Rapid hardening and setting for laying floor and wall tiles, interior and exterio
• Quick setting
• When mixed with FLEXIBLE CEMLATEX SOLUTION, it is ideal
for application on wooden composites, porcelain stoneware,
large sizes and for application on heated screed
•
Pot life: 20 min*
Traffic after: 2 hours*
EN 12004, C2 F
Remark: Performance could
be improved with FLEXIBLE
CEMLATEX SOLUTION
Art. no/Colour
E/Kg
E/Package
Packing/Europallet
000001061/Grey
0,88
17,60/20 kg bag
56 bags/europallet
Special grey adhesive, thixotropic, frost proof. Rapid hardening and setting for
laying porcelain tile and single-fired tiles, flooring and walls even with smooth
non-absorbent surfaces.
When mixed with FLEXIBLE CEMLATEX SOLUTION, it is ideal for application on
wooden floors that are subject to oscillations, overlapping and large sizes.
Mixed with water
Mixed with Flexible Cemlatex Solution
Colour:
GreyGrey
Sorage:
Powder: in the original
Protect from frost
pack if properly sealed and protected from humidity
Duration: 12 months
12 months
Toxicity:
NoNo
Possible irritation of skin and eyes after contact, due to the cement content
Inflammability: NoNo
Mix ratio:
26 parts water with 100 8 kg of FLEXIBLE CEMLATEX SOLUTION
parts powder by weight
with 20 kg of BENFERFIX RAPIDO
(the temperature can have an important influence on the setting time)
Pot life:
20 minutes*
Open time:
10 minutes*
Walkover time on dry supports:
2 hours*
3 hours*
3 days*
3 days*
Conforms to:
EN 12004 CLASS C2F
EN 12004 CLASS C2F S2
86
BENFER
FLEXIBLE CEMLATEX SOLUTION
Synthetic latex to be added to BENFERFIX RAPIDO
• Ideal for the application on wood composites
• Ideal for application on all sub-bases that are subject to
oscillations
• Ideal for large sizes also on heated screed
• Increases the field of application for adhesives
EN 12004 CLASSE C2F S2
with BENFERFIX RAPIDO
Art. no/Colour
E/Kg
E/Package
Packing/Pallet
6,00
48,00/ 8 kg can
48 cans/pallet
Consumption:
As an additive for BENFERFIX RAPIDO:
8 kg of FLEXIBLE CEMLATEX SOLUTION with 20 kg of BENFERFIX RAPIDO
Technical features: A synthetic latex to be added in proportions of 8 kg to each
20 kg bag of BENFERFIX RAPIDO. Notably improves elasticity, adhesion, and
resistance to water, cold and heat; it has been specially designed for laying
porcelain tiles on timber substrates.
Areas of applications:
FLEXIBLE CEMLATEX SOLUTION mixed with BENFERFIX RAPIDO:
Rapid-setting, interior and exterior floor and wall tiling of porcelain, single fired
tiles, natural stone and granite(stable in contact with water), on timber wood,
plywood, wooden boards, substrates subject to vibrations, heavy duty application,
heated screeds (hot water or electric systems).
Appearance:
Sorage
:
Duration:
Danger of harm:
Flammability:
Ph:
Density:
Consumption as an additive:
white latex
protected from frost
no
no
9,5
1,04 kg/m3
from +5°C to + 35°C
from - 30°C to + 90°C
8 kg of FLEXIBLE CEMLATEX SOLUTION with 20 kg of BENFERFIX RAPIDO
BENFER
87
UNIFIX®-2K/6
Highly flexible thin-bed adhesive, grey
•
•
•
•
•
•
•
•
Very high flexibility and deformability
Conforms to DIN EN 12004, C2 TE S2
For swimming pools, terraces,balconies
For critical substrates and heavy duty applications
Easy to apply
High initial bond
Good sag resistance
Pot life: 2 hours*
Traffic after: 2 days*, depending
on the absorption of substrate
EN 12004, C2 TES2
Art. no/Colour
Remark: Highly deformable S2
204251007/White Comp.B
E/Kg
E/Package
Packing/Europallet
2,60
75,84/A+B
25 kg bag Comp. A +
4,17 kg bucket Comp. B
42 bags/europallet
Consumption:
Approx. 2,4 kg/m2
with a 6 mm notched trowel
Approx. 3,1 kg/m
2
Approx. 4,0 kg/m2
Thin-bed adhesive for adhering vitrified and earthenware tiles, ceramic with low
water absorption ≤ 0.5% (fully vitrified), clinker, mosaic and natural stone that is
neither translucent nor sensitive to discolouration.
UNIFIX-2K/6 is suitable for securely adhering tiles to concrete, porous concrete,
plaster, cement based and calcium sulphate screeds/ heated screeds, brickwork,
plasterboard etc. as well as to existing, well bonded tiled finishes.
Furthermore it is suitable as an adhesive for lightweight construction board e.
g. of composed of extruded polystyrene and for adhering tiles on Schomburg
waterproofing systems, also in swimming pools.
Basis:Sand cement
Colour:
Mixing ratio:
Packaging:
Storage:
Mixing time:
Application/substrate temp.:
Pot life:
Open time:
Grout after:
Traffic after:
88
UNIFIX-2K/6 (combination product)
UNIFLEX-B
Liquid plastic
GreyWhite
6 parts by weight
1 part by weight
25 kg bag
4,17 kg bucket
Dry, 12 months
24 months, frostfree
Approx. 3 minutes (drilling machine 300 rpm)
Approx. 2 hours*
Approx. 30 minutes*
At the earliest 2 days*, depending on the absorption of substrate
After at the earliest 2 days*, depending on the absorption of substrate
BENFER
UNIFIX®-S3
Highly flexible thin-bed adhesive
Pot life: 2 hours*
Traffic after: 2 days*, depending
on the absorption of substrate
EN 12004, C1 TE S2
Remark: Super deformable
≥ 30 mm
•Installation on "green", trafficked cement-based screeds
•The vapour permeability of UNIFIX-S3 guarantees that cementbased substrates, which are still damp, will dry out even when
installing tiles early
•The mandatory commissioning of heated screeds before the
installation of ceramic materials can be omitted
• Highly flexible • For interior and exterior use
• For critical substrates and heavy duty use
• Conforms to DIN EN 12004, C1 TE S2
• Also for use on "green" substrates
• Vapour permeable • Water impermeable
• Water and frost resistant
• Deformable to DIN EN 12002 ≥ 30 mm •
Art. no/Colour
E/Kg
E/Package
Packing/Europallet
204276001
Grey Comp.A + White Comp.B
5,00
100,00/20 kg can A+B
15 kg bag Comp.A
5,00 kg buket Comp. B
18 cans/europallet
Consumption:
Approx. 2,8 kg/m2
Approx. 3,7 kg/m
2
Approx. 4,7 kg/m
2
Technical features: UNIFIX-S3 is used as a thin bed adhesive especially for the
installation of vitrified tiles with lower water absorption ≤ 0.5% (fully vitrified),
vitrified tiles, clinker and mosaic onto ‘green’ cement-based substrates. The high
deformability of UNIFIX-S3 can largely compensate for the damaging shear
stresses in the tiled finish and is therefore also especially suitable for the installation
of large format tiles. UNIFIX-S3 is used primarily in floor areas.
UNIFIX-S3 is especially suitable for use on balconies and terraces, in swimming
pools and containers, on heated constructions, on ‘green’ heavier duty cementbased substrates and for the installation of tiles with lower water absorption.
Basis:
Colour:
Mixing ratio:
Packaging:
Storage:
UNIFIX-S3 (combined product)
Mixing ratio:
Component:
Open time:
Grout after:
Fully serviceable after:
Cleaning:
Deformation:
Testing:
UNIFIX-S3 Powder component
UNIFLEX-B Liquid component
Aggregate, cement, additives Liquid polymer
GreyWhite
3 parts by weight 1 part by weight
15 kg bag
5 kg bucket
Dry, 12 months frost free 24 months in the original unopened container
15 kg powder component : 5 kg liquid
Up to 1,6 litres water
Approx. 30 minutes*
2 days* at the earliest dependent on the porosity of the substrate
14 days* at the earliest dependent on the porosity of the substrate
With water immediately after use
30,9 mm to DIN 12002 - without breakage of the test piece
DIN EN 12004 DIN EN 12002
BENFER
89
BENFERJOLLY
Epoxy-polyurethane flexible, two part adhesive
• Floor and wall installation of marble, marble agglomerate
and composite marble tiles, including low thickness tiles
• Interior floor and wall tiling with natural stone and granite,
including on underfloor heating
• Tiling over existing internal ceramic or wood floors
• Tiling on steel substrates, which must first be sanded
• Tiling on gypsum and anhydrite substrates,
without the preventative application of primer
•
Traffic foot on dry supports
after: 12 hours*
EN 12004 CLASSE R2T
Remark: epoxy-polyurethane,
multipurpose
Art. no/Colour
E/Kg
E/Package
Packing/Europallet
000001417/White
000001416/White
8,50
9,00
85,00/10 kg bucket
45,00/5 kg bucket
A two part white adhesive consisting of epoxy-polyurethane resins, graded particle size aggregates and special additives.
It has been formulated and developed for rapid, reliable installation of almost all marble, granite, natural stone, marble
agglomerate and tiles in composite marble with polyester resins or cements, including on non-absorbent substrates or
substrates subject to slight dimensional variation. A special waterless composition makes this product especially suitable where
there is a need to avoid the risk of irreparable staining, not least on porous varieties of marble, and prevent the possible
deformation of reconstituted marble tiles. For interior and exterior application.
90
BENFER
Maximum sizes
Component A
Component B
Consistency:
Paste
Thick liquid
Colour:
White
Straw yellow
Storage:
12 months in the original pack if properly sealed
Toxicity:
Harmful in contact with skin
Caustic and harmful
and irritating in contact
in contact with skin,
with eyes and skin.
ingestion and inhalation.
May cause sensitization
May cause sensitization
Inflammability:No
Mix ratio:
Component A / Component B 94:6
Coverage: 2,5 / 5 kg/m²
From + 10°C to + 30°C
Pot life:
50 minutes*
Open time:
60 minutes*
Walkover time with caution
for grouting on dry supports:
12 hours*
3 days*
Conforms to:
EN 12004 R2T
BENFER
91
High-performance adhesives for natural stone laying
CRISTALLIT-VARIO-light
Thin-bed, medium-bed, flow-bed, thick-bed flexible natural stone adhesive
Pot life: 30 - 60 minutes*
Foot traffic: 4 hours*
Consumption:
Approx. 0,95 kg/m2/mm
•
•
•
•
•
•
•
•
•
•
•
•
Approx. 40% higher area performance
Large formats
5 in 1 technology
Dust reduced
Wall and floor areas
For interior and exterior areas
Up to 30 mm bed thickness
Crystalline water binding
Rapid hardening
Tested to DIN EN 12004 and DIN EN 12002, C2 FT S1
EN 12004, C2 FT S1
Remark: The best for natural
stone
Art. no/Colour
E/Kg
E/Package
Packing/Europallet
000001083/White
2,40
36,00/15 kg bag
42 bags/europallet
Areas of application: CRISTALLIT-VARIO-light offers particularly smooth application
as a thin-bed, medium-bed, flow-bed and thick-bed adhesive. For the installation
of natural stone slabs as well as vitrified and earthenware tiles, ceramic tiles with
low water absorption ≤ 0.5% (fully vitrified), those with deeply profiled backs, those
with thickness variations and those with high and low water absorption. Preferred
for work under time constraints and for the installation of light coloured, translucent
materials. CRISTALLIT-VARIO-light is suitable for confidently bonding to even and
uneven load-bearing substrates. CRISTALLIT-VARIO-light is furthermore for use as a
repair and patching mortar up to 30 mm, beneath tiles. It is additionally suitable as
an installation material for lightweight building panels e.g. extruded polysyrene and
for installing tiles to mineral-based and dispersion-based SCHOMBURG bonded
waterproof membranes. On horizontal external areas such as e.g balconies and terraces and when laying large format tiles bigger
than 3,600 cm² in internal areas, modify CRISTALLIT-VARIO-light, where necessary, with UNIFLEX-B.
Basis: Colour: Pot life: Open time: Foot traffic: Groot after: Consumption: Packaging: Storage:
92
high quality white cement, selected lightweight aggregates and additives
White
approx. 30–60 mins*
approx. 20 mins*
after approx. 4 hours*
4 hours*
Env. 0,95 kg/m2/mm
Sac 15 kg
dry, 6 months, use opened packaging promptly
BENFER
CRISTALLIT-MULTI-flex
Modern flexible adhesive with increased yield
Pot life: 30 - 45 minutes*
Grout after: 3-4 hours*
•
•
•
•
•
•
•
•
•
•
•
•
Rapid crystalline water binding
Rapid hardening
Flexible
Up to 15 mm bed thickness
For the installation of natural stone tiles
Good slump resistance
White
Tested to DIN EN 12004 and DIN EN 12002, C2 FT S1
Especially creamy application
EN 12004, C2 FT S1
Remark: Rapid crystalline water
binding
Art. no/Colour
E/Kg
E/Package
Packing/Europallet
000001082/White
1,60
40,00/25 kg bag
42 bags/europallet
Consumption:
Approx. 2,3 kg/m2
Approx. 3,1 kg/m
2
Approx. 4,1 kg/m2
Approx. 5-7 kg/m
with a 15-20 mm notched trowel
2
CRISTALLIT-MULTI-flex is a particularly creamy to use thin or medium bed
adhesive. For the installation of natural stone tiles as well as earthenware
and vitrified ceramic tiled finishes, ceramic tiles with low water absorption
< 0,5% (fully vitrified). It is preferred for work under time constraints and for
fixing light, translucent materials and those sensitive to discolouration such as
e.g. crystalline marble, limestone, granite, porphyry, quartzite, sandstone etc.
Due to the efficient binding of the water, CRISTALLIT-MULTI-flex offers further
protection against discolouration from the stone’s own constituents.
For installing large format tiles bigger than 3600 cm2, modify 25 kg CRISTALLITMULTI-flex with 4,17 kg UNIFLEX-B.
Basis:
Bulk density:
Pot life:
Open time:
Foot traffic:
Grout:
Full service conditions:
Cleaning:
Storage:
High quality white cement, selected aggregates and additives
Approx. 1,5 kg/dm3
Approx. 30-45 minutes*
After approx. 3 to 4 hours*
Clean tools immediately after use with water
Dry, 12 months in the original unopened packaging.
BENFER
93
MARMOFLEX
Rapid setting flexible adhesive for marble, granite and natural stone laying
• Extra-white and flexible
• Quick-setting
• Does not stain natural stone
• Avoids the warping of reassembled tiles
• Supports even the heaviest tiles
• Ideal for heated screed
• Tested to EN 12004- C2 FE
•
Pot life: 30 min*
Traffic with caution for grouting
on dry supports after: 3 hours*
Consumption: 3,5-8 kg/m2
EN 12004 C2FE
Remark: Does not cause stain
Art. no/Colour
E/Kg
E/Package
Packing/Pallet
1,70
42,50/25 kg bag
60 bags/pallet
Extra-white powder adhesive consisting of high-strength cements, graded particle
size aggregates, synthetic resins and special additives. It has been formulated
and developed for rapid, reliable installation of almost all marble, granite, natural
stone, marble agglomerate and tiles in composite marble with polyester resins
or cements. Its ability to chemically bind the majority of the water in the mix,
together with very rapid setting and hydration eliminate the risk of irreversible
staining of the slabs and prevent possible deformation of reconstituted tiles.
Appearance:
Extra-white powder
Storage:
6 months in the original pack
Toxicity:
Inflammability:No
Mixing ratio:
24 parts water to 100 patrs powder by weight
Coverage: From 3,5 to 8 kg/m²
Pot life:
30 minutes*
Open time:
30 minutes*
on dry supports:
3 hours*
14 days*
Conforms to:
EN12004 CLASS C2FE
94
BENFER
CEMLATEX 600 SA + BENFERFIX WHITE SA
2 components cementitius adhesive for porcelain tiles, glass mosaic, natural and engineered stones
•
•
•
•
•
•
•
•
•
For natural stones laying
For laying of ceramic floor and wall tiles and glass mosaic
Flexible
Trowable up to 15 mm thickness
For interior and exterior
Smooth application
White colour
Tested to EN 12004 and EN 12002, C2 S2
Pot life: 2 hours*
Consumption: 4-5 kg/m2
EN 12004 C2S2
Remark: Special for natural and
engineered stones
Art. no/Colour
E/Kg
E/Package
Packing/Pallet
000001506/CEMLATEX 600 SA
4,00
100,00/25 kg can
48 cans/pallet
0,80
20,00/25 kg bag
60 bags/pallet
White
000001011/BENFERFIX WHITE SA
White
Technical features: CEMLATEX 600 SA is a polymeric dispersion designed to
be used in combination with BENFERFIX WHITE SA (cement based powder
component), in order to obtain a high performance cement based adhesive for
wall and floors laying of porcelain tiles, glass mosaic, natural and engineered
stones in interior and exterior areas. CEMLATEX 600 SA can be used for the
same applications in combination with Portland cement and fine sand.
Fields of application: For laying porcelain tiles and non-absorbing ceramic tiles.
For interior or exterior laying of ceramic floor and wall tiles or natural stones of all
kinds also onto smooth and non absorbing foundations. Interior and exterior laying
of ceramic floor and wall tiles, glass mosaic, natural and engineered stones.
Basis:
High quality white cement, selected aggregates
Colour:White
Bulk density:
1,50 kg/lt
Pot life:
3 hours*
Open time:
10-20 minutes *
Walkover:
24 hours*
Final hardening:
14 days*
Mixing ratio:
25 parts water to 100 patrs powder by weight
Max application depth:
15 mm
Coverage:
4-5 kg /m²
From +5°C to +40°C
Conforms to:
EN 12004 (*) CLASS C2 S2
BENFER
95
ASOCRET-HB-flex
Flexible contact and bonding slurry
• Bonding agent for bonded cement based screeds
• Contact and bonding slurry for laying tiles and slabs in traditional
sand/cement methods
• Polymer modified, high loading capacity
• For interior and exterior
• Easy to use
Pot life: 2 hours*
Foot traffic after:
• approx. 24 hours* when
used with rapid screeds,
• after 3 days* with conventional screeds
Remark: Easy and long lasting
Art. no/Colour
E/Kg
E/Package
Packing/Europallet
202224001/Grey
1,50
37,50/25 kg bag
42 bags/europallet
Flexible contact slurry used for the laying of cement-based screeds to the substrate
and for the laying of tiles and uncalibrated natural stones on to the fresh mortar
bed.
Particularly matched to our ASO-EZ PLUS screeds range.
Suitable for vetrified tiles, fully vetrified tiles, clinker, mosaic, non translucent
natural stone and concrete slabs.
Basis:
Cement, aggregate, additives
Color:Grey
Bulk density:
1,15 kg/dm³
Standing time:
Approx. 3 minutes*
Pot life: Approx. 120 minutes*
Traversable:
After approx. 24 hours* when used with rapid screeds,
after 3 days* with conventional screeds
Tool cleaning:
In fresh state with water
Consumption:
Approx. 1-2 kg/m²
Storage:
Dry, 12 months in original unopened packaging
96
BENFER
BENFER
97
Tile adhesives for interior and exterior
BENFERGRIP+
Special adhesive highly resistant. Hight strenght and long open time.
•
•
•
•
•
•
•
•
•
•
Pot life: 4 hours*
EN 12004, C2 TE
‍Remark: Extra white, conforms
to EN 12004, C2 TE
98
Extra-white
High resistance to sliding
Application without the need of spacers
Perfect for glass and ceramic mosaics
Perfect for Klinker and thick floor coverings
Its smooth consistency reduces fatigue
Long open time
Conforms to : EN 12004, C2 TE
Mixed with CEMLATEX 600 conforms to EN12004 C2 TE S2
Certificate CSTB n° 151 MC 332.
Art. no./Colour
E/Kg
E/Package
Packing/Europallet
0,60
0,60
15,00/25 kg bag
15,00/25 kg bag
45 bags/europallet
60 bags/pallet
000011061/Grey
000011060/Grey
0,56
0,56
14,00/25 kg bag
14,00/25 kg bag
45 bags/europallet
60 bags/pallet
BENFER
Hi-tech adhesive, extra-white, with no vertical slippage, frost-proof. Perfect for laying mosaic (glass, marble, porcelain),
porcelain tiles and single-fired tiles floors and coverings. Laying of thick floor coverings. High final resistances and extended
open time.
Areas of applications:
• for laying interior and exterior wall and floor
• with CEMLATEX 600 suitable for floors with sizes bigger than 2.000 cm2
• swimming pools, cold stores, prefabricated buildings and floors typically subject to heavy loading
Mixed with water
Mixed with CEMLATEX 600
Consistency:
Very doughy
Very doughy
Colour:
Grey and white
Grey and white
Storage:
Powder: In the original unopened packaging, in a dry place
CEMLATEX 600: Protect from frost
Duration: 12 months
12 months
Toxicity:
No. Possible irritation of skin and eyes after contact, due to the cement content
Inflammability:No
No
Mixing ratio:
30 parts water to 100 5 kg of CEMLATEX 600 each 25 kg
of powder + 2,75 litres of water
Water ratio:
7,5 liter /25 kg bag
Vertical slipping (EN1308):
< 0,5 mm
Pot life:
4 hours*
Open time:
30 minutes*
for grouting on dry supports
24 hours*
14 days*
Final performance:
Mixed with water
Mixed with CEMLATEX 600
Conforms to
EN 12004 CLASS C2TE
EN 12002 CLASS S2
BENFER
99
BENFERGRIP C2TE
Special adhesive highly resistant
•
•
•
•
•
•
•
•
•
•
White
High resistance to sliding
Application without the need for spacers
Perfect for glass and ceramic mosaics
Perfect for Klinker and thick floor coverings
Its smooth consistency reduces fatigue
Long open time
Conforms to : EN 12004, C2 TE
Mixed with CEMLATEX 600 conforms to EN12004 C2 TE S2
Pot life: 4 hours*
Consumption: 3,5 - 5 kg/m2
EN 12004 C2TE
Remark: White, long open time
Art. no/Colour
E/Kg
E/Package
Packing/Pallet
000001070/White
000001071/Grey
0,52
0,48
13,00/25 kg bag
12,00/25 kg bag
60 bags/pallet
60 bags/pallet
BENFERGRIP C2TE is a HIGHLY TIXOTROPIC adhesive in powder consisting of
highly resistant cement, selected granulometry quartz, synthetic resins and special
new generation additives. Its formula was conceived and developed for rapid
and safe installation of all ceramic materials, even from top to bottom.
• It has been formulated to develop high resistance to slippage when fixing wall
tiles • Tiles can be fixed without spacers, and working from the top down.
• BENFERGRIP C2TE's special formula creates a thixotropic adhesive, which
remains soft during mixing, spreading and tiling, but regains consistency
immediately afterwards • BENFERGRIP C2TE has a long open time, which
is indispensable in ensuring that the tile backs are properly wetted through the
action of the special additives, and allowing its use in a softer state than traditional adhesives without loss of vertical bonding
power • BENFERGRIP C2TE white does not contain sand and therefore it is particularly suitable also for laying glass mosaic.
BENFERGRIP C2TE mixed with WATER
BENFERGRIP C2TE mixed with CEMLATEX 600
Consistency:
Very doughy
Very doughy
Storage:
Duration: 12 months
12 months
Toxicity:
Inflammability
NoNo
Mixing ratio:
of powder + about 2 litres of water
Vertical slipping (EN1308):
< 0,5 mm
Pot life:
4 hours*
Open time:
30 minutes*
Walkover time with caution for grouting on dry supports
24 hours*
Final hardening on dry supports: 14 days*
Conforms to:
EN 12004 CLASS C2TE
100
BENFER
BENFERFIX EXTRA
Ciment based adhesive for ceramic tiles application, interior and exterior use
• Extended open time • Excellent workability
• Also for porcelain stoneware up to 30x30
• More than fourty years of applications
Fields of application: Interior and exterior laying of ceramic
floor and wall tiles, marble and other natural stones of any type
in size up to 2.000 cm2 interior and up to 1.200 cm2 exterior.
Mixed with CEMLATEX 600:
• laying of floor and wall tiles in difficult environmental conditions
such as: swimming-pools, cold rooms, terraces, surfaces
exposed to the action of the water, etc.
Pot life: 3 hours*
EN 12004 C1E
Remark: Suitable for porcelain
up to 30x30, more than 40
years of applications
Art. no/Colour
E/Kg
E/Package
Packing/Pallet
000001016/White
000001015/White
0,42
0,42
10,50/25 kg bag
10,50/25 kg bag
40 bags/europallet
60 bags/pallet
000001046/Grey
000001045/Grey
0,38
0,38
9,50/25 kg bag
9,50/25 kg bag
40 bags/europallet
60 bags/pallet
Cement based adhesive in white or grey with excellent workability and grip,
for the interior and exterior application of ceramic floor and wall coverings. Its
formula is the result of years of experience and guaranteed by thousands of
applications in Italy and abroad, each year. Mixed with Cemlatex 600, and
once dry, it becomes the most indicated product for supporting the most severe
stress in: swimming pools, cold rooms, prefabricated structures, heated floors,
and floors that are subjected to heavy loads.
BENFERFIX EXTRA mixed with WATER
BENFERFIX EXTRA mixed with CEMLATEX 600
Very doughy
Very doughy
Duration: 12 months
12 months
Toxicity:
Inflammability:No
No
Mixing ratio:
of powder + about 2,5 litres of water
Pot life:
3 hours*
Open time:
30 minutes*
for grouting on dry supports
24 hours*
Final hardening on dry supports:14 days*
Conforms to:
EN 12004 CLASS C1E
EN 12004 CLASS C2E S2
Consistency:
Storage:
BENFER
101
Tile adhesives for interior
SOLOFLEX ANHYDRITE
Pourable adhesive for floor laying on anhydrite screeds
• Direct application without primer • High flexibility • Ideal
for heated screed • Ideal for porcelain stoneware • Ideal for
large sizes • Fluid consistency , laying without double gluing
up to 3.600 cm² • Application thickness up to10 mm • Low
consumption • Dust reduced • Ideal for interior application
Pot life: 2 hours*
Remark: Primer not necessary
Fields of application: For porcelain, ceramic and natural stone
(moisture stable) laying on:
• Interior floors on calcium sulphate based screeds
Substrate: (inside only, not suitable for wet rooms, with floor
discharges of water)
• Anhydrite based screeds, standard or heated with water
system or electric resistance
• Elastomeric waterproofing membranes (SANIFLEX)
13/14 - 1254
Art. no/Colour
E/Kg
E/Package
Packing/Europallet
1,40
28,00/20 kg bag
56 bags/europallet
SOLOFLEX ANHYDRITE is a powder adhesive composed of calcium sulphate,
aggregate with selected particle size, synthetic resins and special additives.
Its formula has been conceived and developed for quick and sure laying of
porcelain, ceramic and natural stone (moisture-stable), on fluids Anhydrite based
screeds. Its nature allows the direct application without the need to treat the
screed with a primer, the fluid rheology allows laying without double gluing tiles
with surface up to 3,600 cm², its reaction times allows grouting after 4 hours
only.
Colour:
Light grey powder
Danger of toxicity: The product may cause irritation to the eyes and skin.
We suggest to adopt appropriate protections
Inflammable:No
Mixing ratio:
Water demand:
6,80 litres per bag of 20 kg
10 mm
Consumption:
4 to 8 kg/ m²
Application temperature from:
+ 5° C to + 35° C
Pot life:
2 hours*
Open time at 23°c and 50% R.H.:
20 Minutes*
Walkability for the execution of joints on dry support: After 4 hours*
7 days*
Temperature resistance by:
-30°C to +80°C
* at 23° and 50% of relative humidity
Final performance:
Initial adhesion at 24 hours resistance
> 0,5N/mm²
Initial adhesion at 28 days resistance
> 1,5 N/mm²
Adhesion after heat ageing (70° c )
> 1,5 N/mm²
Deformation
> 2,5 mm
102
BENFER
BENFERGYPS
Cement based adhesive for wall and floor laying of ceramic tiles
• Special adhesive for laying porcelain stonware and ceramic
tiles on plaster sub-bases, drywall, or anhydrite without
preventative primer application
• Good final resistance
• For interiors
Pot life: 4 hours*
EN 12004 C1
Remark: Good final strength
Art. no/Colour
E/Kg
E/Package
Packing/Europallet
000009550/White
0,78
15,60/20 kg bag
56 bags/europallet
BENFERGYPS is a powder adhesive suitable for laying interior wall and floor
coverings on sub-bases in plaster, plasterboard, drywall or anhydrite.
It contains high resistance cements, synthetic resins and special additives.
BENFERGYPS is tixotropic and can be easily applied to wall and floor without
application of primer, also in the above mentioned cases.
Appearance:
White powder
Storage:
Duration:
12 months
Danger of harm:
to the cement contents. Adequate protection is reccomended
Inflammability:No
Mix ratio:
26 parts water with 100 parts powder
Liquid mixture:
5,2 Liters per 20 kg sack of powder
Consistency:Doughy
Maximum application depth:
10 mm
Mixture pot life:
4 hours*
Open time:
20 minutes*
Walkability with caution for execution
of joints on dry supports:
24 hours*
14 days*
Conforms to:
EN 12004, C1
BENFER
103
BENFERFIX
Cement based adhesive
• Extra-white
• Its smooth consistency reduces fatigue
• Good open time
• Excellent workability
• More than 40 years of applications
•
Pot life: 2 hours*
EN 12004 C1
Remark: Primer not necessary
Art. no/Colour
E/Kg
E/Package
Packing/Pallet
000001035/Grey
0,34
0,33
8,50/25 kg bag
8,25/25 kg bag
60 bags/pallet
60 bags/pallet
Cement based adhesive in extra-white or grey with excellent workability and
grip, for the interior application of ceramic floor and wall coverings. Its formula
is the result of years of experience and guaranteed by thousands of applications
in Italy and abroad each year.
Consistency:Doughy
Colour:
Extra white/grey
Storage:
Duration: 12 months
Toxicity:
Inflammability:No
Mixing ratio:
Pot life:
4 hours*
Open time:
20 minutes*
Walkable on dry supports:
24 hours*
14 days*
Conforms to:
EN 12004 CLASS C1
104
BENFER
EASYTILE
White and grey powder cement adhesive for interior floors and walls
• Easy and affordable
• For interior floor and wall coverings
• Tile absorption ≥ 3%
• Maximum permitted size 30x30
•
Pot life: 4 hours*
EN 12004 C1
Remark: Easy and affordable
Art. no/Colour
E/Kg
E/Package
Packing/Pallet
000002020/White
000002120/Grey
0,30
0,30
7,50/25 kg bag
7,50/25 kg bag
60 bags/pallet
60 bags/pallet
Powder adhesive made up of grey or white cements, aggregates with chosen
granulometry and special additives. Its formula is the result of years of experience
and guaranteed by thousands of applications in Italy and abroad each year.
Mixed with water, EASYTILE becomes a shiny plastic paste with good adhesive
qualities for all floor and wall covering materials with absorption ≥ 3% and for
all sub-bases that are normally used in construction.
Consistency:
Colour:
Storage:
Duration: Toxicity:
Very doughy
White, grey
12 months
Inflammability:No
Mixing ratio:
Pot life:
4 hours*
Open time:
20 minutes*
for grouting on dry supports:
24 hours*
Walkable on dry supports:
48 hours*
14 days*
Conforms to:
EN 12004 CLASS C1
BENFER
105
POWERPLAST D2
Ready mix adhesive for walls and floors
•
•
•
•
•
•
•
Suitable for a wide range of substrates
Ready to use
Easy use for everyone
Does not require professional equipment
Wide selection of packages
Tested in accordance with: EN 12004, D2 TE
Tecnhical characteristic: ready mix adhesive based on
acrylic resins, mineral charges and additives, with good
characteristics of elasticity and adhesion.
Consumption: 3-5,5 kg/m2
EN 12004, D2 TE
Remark: Suitable for a wide
range of substrates
Art. no
E/Kg
E/Package
Packing/Europallet
000001479
000001478
000001477
000001476
1,80
1,96
2,40
2,80
45,00/25 kg bucket
29,40/15 kg bucket
19,20/8 kg bucket
8,40/3 kg bucket
825 kg (33 buckets 25 kg)
660 kg (44 buckets15 kg)
Fields of application:
Interior laying of ceramic tiles coverings, natural stone (stable to the water), glass mosaic
• Laying of polystyrene boards.
• Suitable for wet areas
Product limits: the adhesive hardens by evaporation of its own water content, so it’s not suitable to lay not porous tiles on
non-absorbent supports.
106
BENFER
Support
•
•
•
•
•
•
•
•
•
•
•
•
Concrete
Cement-based screeds, standard or heated with water system
Pourable cement-based screed, standards or heated with water system
Anhydrite screed, standard or heated with water system
Old ceramic tiles
Cement-based plaster
Gypsum-based plaster
Gypsum-based board
Plasterboard standard or waterproofed
Wooden boards
Polystyrene boards (specific to be tiled)
Elastomeric waterproof membrane (SANIFLEX)
Maximum sizes
• Interior floors up to 1,100 cm ²
• Internal wall up to 2000 cm ²
• Tiles with absorption < 3% 1,200 cm ²
See the choice guide to verify size limits by tile/substrates characteristics.
Colour: White
Storage:
In the original unopened packaging, in a dry and fresh place
Duration:
12 months
Toxicity:No
Inflammable:No
5 mm
Consumption from:
3 to 5,5 kg/m²
Application temperature by:
+5 ° C to + 35 ° C
Open time:
30 minutes*
Walkover time on dry support:
24 hours*
14 days*
Final performance:
Tested in accordance with: EN 12004 CLASSE D2TE
BENFER
107
Floor sound insulation systems
STEPBOARD SILENT
Stress barrier and highly sound dampening layer
• Effective acoustic insulation and stress barrier under tiles, natural
stone and parquet
• Can be applied on screed, old floors and wooden substrates
• Sound barrier protection up to 21 dB
• Low thickness just 12 mm
• Suitable for underfloor heating systems
• Environment friendly
• Simple to handle
• Ceramic tiles 200 cm² to 2400 cm²
Remark: Perfect for renovation
Art. no/Colour
E
Package
Packing/Europallet
000013300/Green/White
28,00 m2
12 mm Thick board
100x60 cm
100 pcs/europallet
000009999/Self Adhesive Tape
2,20 ml
14 cm width x 1200 cm
10 pcs/Boxes
Tape consumption ml= m x 2,5
2
BENFERFLEX C2
LIGHTFLEX
LEADERFLEX RAPIDO
BENFERFLEX RAPIDO
DEKOGROUT
DEKOGROUT-2K
STEPBOARD SILENT
SOLOPLAN-30
SILENT
TAPE
RD-SK50
UNDERFLOOR HEATING
Thickness:
Format:
Grammage:
Floor-load capacity:
Thermal conductivity:
Heat transfer coefficient:
Footstep sound improvement with bonded panels:
Footstep sound improvement not bonded panels:
Fire classification acc. to EN 13501-1 E (fl)
*) Test values according to ISO 702 as guideline
Floor system
Smooth substrate, self levelling compound if necessary
Ceramic tiles 200 cm² to 2400 cm²
108
12 mm ± 1,0 mm
1000 x 600 mm ± 1,0 mm
6,6 kg/m² ± 5%
3,5 kN/m²
l = 0,06 W/mK
U = 4,17 W/m²K
Δ L’W = 18 dB*
Δ L’W = 21 dB*
BENFER
STEPBOARD SILENT consists of a
9 mm thick Polyester-Fibre-Panel
with an optimal density for a
maximum of sound insulation and
a Polyester-Fibre-Fleece with a
thickness of 3 mm at the bottom.
This Sandwich-panel has a high
rigidity and compressive strength.
In connection with a flexible tile
adhesive it can be covered with all
kind of top layers, with exception
of solid parquet.
Floor sound insulation systems
STEPBOARD
Polyester fibred, step sound and neutralizing insulation board
•
•
•
•
•
•
Thickness strengths: 4 mm, 9 mm and 15 mm
Stable form
Pressurised
Environment friendly
Protected against rotting
Sound barrier protection up to 29 dB (acc. To DIN 52210)
STEPBOARD is a simple to handle, high pressure, secure
neutralizing and renovation board with excellent stepping sound
and atmospherical insulating qualities
Remark: Perfect for renovation
Art. no/Colour
E/M2
E/Package
Packing
205833101/Green
4 mm thick board
20,00
180,00 / box with 15
boards = 9 m2
10 boxes/europallet
205833103/Green
9 mm thick board
22,00
132,00 / box with 10
boards = 6 m2
10 boxes/europallet
205833105/Green
15 mm thick board
32,00
96,00 / box with 5
boards = 3 m2
10 boxes/europallet
STEPBOARD can be applied as a permanent solution for the reducing of step sound,
to be insulated under ceramic tiles and slabs, natural stone, cast stone, parquet and
laminate flooring for interior applications. 9 mm and 15 mm thick STEPBOARDs are
suitable for the correct laying of professional insulation boards on Wooden floors of
load carrying capacity, such as lobbies, parquet and chipboard. 4 mm STEPBOARDs
are suitable for heated flooring (without results of heat loss provided).
9 mm and 15 mm thick STEPBOARDs provide heat insulation qualities (please see
important notes). For neutralizing of ceramic tile surfaces of load carrying capacity
which have been cracked or damaged, for the covering and re-alignment of Interfering
expansion joints in upper layers.
Storage: In dry storage, layed flat for at least 2 years.
For further technical details please see separate table at the end of the Technical Data Sheet!
Basis:
Colour:
Packaging:
Storage:
Polyester fibres
green
4 mm thick board:
Box with 15 boards = 9 m2 9 mm thick board:
Box with 10 boards = 6 m2 15 mm thick board:
Box with 5 boards = 3 m2
In dry storage, layed flat for atleast two years.
BENFER
109
Waterproofing and decoupling systems for terraces and green screeds
ADF®-Systemkleber-FB
Hydrophobic flow bed adhesive, rapid setting
•
•
•
•
•
•
•
•
•
•
Pot life: 30 - 45 min*
Foot traffic after: approx. 4
hours*
DIN EN 12004 C1 FE
Remark: ADF-Systemkleber-FB is
used for the installation of
ADF-Balkonfolie
According to DIN EN 12004, C1FE
Water repellent
Rapid setting
Easy to use
Polymer modified
Rapid hardening
Thixotropic
Efficient application
Consumption:
approx. 1.5 kg/m2 with a 4 mm notched trowel
approx. 4.5 kg/m2 with a 10 mm notched trowel
Art. no/Colour
E/Kg
E/Package
Packing/Europallet
205969001/Grey cement
2,00
50,00 /25 kg bag
42 bags/europallet
ADF-Systemkleber-FB is used as a thin-bed adhesive, for work under time
constraints, for the largely void free bedding in particular with profiled or large
format tiles.
With ADF-Systemkleber-FB a largely void free installation is possible in one
operation where the application of the adhesive to the rear of the tile can
be omitted if suitable installation techniques are used. ADFSystemkleber-FB is
suitable as a thin-bed adhesive for the installation of vitrified, earthenware and
ceramic tiles with low water absorption < 0.5% (fully vitrified), clinker, mosaics
and natural stone materials not sensitive to discolouration or not translucent,
especially on SANIFIN and ADF-Balkonfolie. Observe the specific properties of
the materials to be installed.
Basis:
Colour:
Filler composition:
Bulk density:
Pot life:
Open time:
Grout after:
Full service conditions after:
Cleaning:
Testing:
Consumption:
Storage:
110
Sand, cement, additives (polymer modified)
cement grey
fine sand
1,5–1,6 kg/dm3
+5 °C to +25 °C
30 to 45 mins*
approx. 20 min*
approx. 4 hrs*
approx. 7 days*
With water immediately after use.
according to DIN EN 12004
approx. 1,5 kg/m2 with a 4 mm notched trowel
approx. 4,5 kg/m2 with a 10 mm notched trowel
BENFER
ADF-Balkonfolie
Waterproofing and decoupling membrane
• Waterproofing membrane for balconies and terraces
and for bonded waterproofing in combination with
tiling in wet areas
• Furthermore as a decoupling membrane for difficult
substrates which are at risk of cracking
Consumption: 1,01 m²/m²
Remark: 20 mt of waterproofing
tape included
No.art.
E/M2
E/Package
Packing/Europallet
205964001
20,00
300,00/ 1 m x 15 m = 15 m2
(incl. 20 m Balcony joint tape)
24 pcs/europallet
BENFER
111
BSMAT
3 Ply uncoupling mat
•
•
•
•
Three layer uncoupling mat
Fast and easy to apply
Ideal on underfloor heating
Ideal on plywood and chipboard
BSMAT is used to protect floor tiles against movement in the
substrate. It protect the floor under thin-set tile installation from
moisture migration and cracks. It can be applied beneath
ceramic tile, natural stone and synthetic stone finishes in in
internal areas, on cement and anhydrite based screed, concrete
slabs, old ceramic tiles, plywood and wooden boards.
Remark: Reliable and easy to
apply
Art. no/Colour
E/M
E/Package
Packing/Europallet
00000 4170/white
00000 4171/white
12,40
12,20
124,00/10 m2 roll
610,00/50 m2 roll
60 rolls/europallet
14 rolls/europallet
Application: Cut the BSMAT to size with a knife or scissors. Using either a 4 mm or 6
mm notched trowel, comb the chosen adhesive (every BENFER SCHOMBURG flexible
adhesive slow set or rapid set is suitable), onto the substrate to an area approx. 10 cm
wider than the mat.
Subsequently lay the membrane into the adhesive bed and press in with a smooth trowel
or roller ensuring that there are no voids or folds. Ensure that the membrane is completely
bedded with full transfer of adhesive. Cut membrane sections are to be butt jointed flush
against each other.
Material composition:
Colour:
Weight
Thickness:
Resistance to temperature: :
Packaging:
Storage:
112
composite material consisting of two outer layers of polypropylene non woven
and one inner layer off glass fibre
white
approx. 270 g/m2
approx. 0,85 mm
Rolls: 10 m x 1.00 m and 50 m x 1.00 m (length x width)
frost free, 24 months, protected from sunlight in the original unopened packaging
BENFER
SANIFIN
Waterproof membrane
• Waterproofing beneath tiles in wet areas and wet rooms as
well as commercial kitchens. Can be used on all wall and
floor construction materials suitable for wet duty applications
• For waterproofing surfaces that need to be tiled quickly
• Technical approval for wet duty classifications A1, A2 and C
SANIFIN is used for waterproofing beneath ceramic tile, natural
stone and synthetic stone finishes in bathrooms, kitchens, private
and public wash rooms (such as e.g. in hotels, sports complexes
and old people homes and care homes).
Consumption: 1,01 m2/m2
Remark: Easy and fast
Art. no
E/M2
E/Package
Packing/Europallet
205901001
13,00
195,00
1 m x 15 m = 15 m2
40 pcs/europallet
SANIFIN is suitable for wet duty classification areas A and C in accordance with building
authority test criteria and the damp duty classification areas A0 in accordance with the
ZDB information sheet “Advice on the installation of bonded waterproofing with tiled
finishes in internal and external areas.”
Furthermore SANIFIN can be used for waterproofing in buildings with traffic loadings up
to 3.5 KN/m2, point loads in accordance with DIN 1055-3 up to 2KN.
High dynamic loading (such as e.g. continuous vehicular traffic) is excluded.
Fine, non-penetrating hairline cracks on the surface of the substrate of < 0.1 mm are
acceptable and can be directly bridged with SANIFIN.
SANIFIN is suitable for use in interiors in accordance with the AgBB evaluation scheme (Committee for Health-related Evaluation
of Building Products), the French VOC by-law and GEV-EMICODE.
Basis:
composite material consisting of a polypropylene fleece on the exterior with
an internal polyethylene inlay
Weight:
approx. 307 g/m2 ± 25 g/m2
Colour:
white with random print
Sd value:
≥ 85 m
Water vapour permeability in accordance with EN 1931
Thickness:
approx. 0,5 mm
Storage:
frost free, 18 months, protected from sunlight in the original unopened packaging
Packaging:
Rolls: 15 m x 1.00 m (length x width)
Fire performance to DIN 4102-1:
B2
UV resistance to DIN ISO 4892-3:
≥ 450 hours
Testing:
Fulfills the requirements of the “Testing policy for the assignation of a building
authorities test certificate for waterproofing materials in combination with tiled
finishes, part 2 sheet form combination waterproofing” for the procurement of
an abP.
MPA Braunschweig, test certificate No. P-5078/818/08-MPA BS
BENFER
113
Wooden floors primer
ASOWOOD-Primer
Solvent-free consolidating and moisture barrier primer
• It allows the laying of wooden floors on cement based screeds
with residual moisture < 4%
• Solvent free
• Single component, easy to use
• Application of the second layer after 3 - 4 hours
Foot traffic after: approx. 6 - 8
hours*
Consumption: 200 - 400 g/m²
Remark: Solvent free
Art. no/Colour
E/Kg
E/Package
Packing/Europallet
000001471/Brown
18,00
180,00 /10 kg can
76 cans/europallet
ASOWOOD-Primer is used to prepare cement based screeds (residual moisture
< 4%) and calcium sulphate screeds (after abrasion, residual moisture < 1%), for
wooden floors application with ASOWOOD-2KPU e ASOWOOD-2K.
It strengthen the screed and, mixed with QUARTZ-Sand (0,2-0,7 mm), is suitable
for fast reparation works.
Basis:
Polyurethane resin
Colour:Brown
Viscosity:
20/25 seconds (Ford)
From + 15°C to + 25°C
Pot life:
Foot traffic after:
Min. approx. 6-8 hours*
Overcoat after:
Approx. 3-4 hours* up to a max. 12 hours
Fully cured:
After approx. 1-3 days*
Cleaning & Equipment Maintenance:
Thoroughly clean tools immediately after use with INDU-IB Cleanser
Storage & Shelf Life:
12 months when stored dry and cool above +10°C
in the original unopened packaging
*at 20° and 65% of relative humidity
114
BENFER
Wooden floors adhesives
ASOWOOD-2KPU
Special adhesive for all kind of wooden floors
•2 Components Epoxy-polyurethane
•Solvent free, ecologic
•Suitable for cement based and calcium sulphate based
screeds, suitable for heated screeds
•Suitable for application on old non absorbing floors
(porcelain, marble, wooden floors)
•Easy to use
Foot traffic after: approx.3 - 4
days*
Consumption: 1 - 1,4 kg/m²
Remark: Solvent free
Art. no/Colour
E/Kg
E/Package
Packing/Europallet
000001472/Beige
5,40
54,00 / 10 kg bucket
Special adhesive for the laying of wooden floors of every kind and dimension
on cement based screed (residual moisture < 2%) and calcium sulphate based
screed (residual moisture < 0,5%), even heated.
The application on screeds with higher residual moisture level is possible after the
screed treatment with ASOWOOD-Primer.
Basis:
Epoxy-polyurethane resins
Colour:Beige
Viscosity (Brookfield):
65.000-90.000
From + 10°C to + 30°C
Pot life:
Foot traffic after:
Min. approx. 3-4 days*
Fully cured:
Sandpapering:
After 3-7 days*
BENFER
115
Wooden floors adhesives
ASOWOOD-2K
2 components adhesive for wooden floors
• 2 Components Epoxy-polyurethane
• Suitable for cement based and calcium sulphate based
screeds, suitable for heated screeds
• Suitable for application on old non absorbing floors
(porcelain, marble, wooden floors)
• Easy to use
Foot traffic after: approx.1-2
days*
Consumption: 1 - 1,4 kg/m²
Remark: Easy to use
Art. no/Colour
E/Kg
E/Package
Packing/Europallet
000001473/Beige
5,00
50,00/10 kg bucket
Specific water-free 2 components epoxy-polyurethane adhesive for the laying of
wooden floors of every kind and dimension on cement based screeds or on nonabsorbing floors (marble, tiles, flagstones, wood surfaces).
The application on cement based screed with residual moisture < 2% and on
calcium sulphate based screed with residual moisture < 0,5% can be done
directly, the application on screeds with higher residual moisture level is possible
after the screed treatment with ASOWOOD-Primer.
Basis:
Epoxy-polyurethane resins
Colour:Beige
From + 10°C to + 30°C
Pot life:
Approx. 120 minutes*
Foot traffic after:
Min. approx. 1-2 days*
Fully cured:
Sandpapering:
After 3-7 days*
116
BENFER
BENFER
117
CRISTALLFUGE
Natural stone and multi-function grout
Foot traffic after: 90 minutes*
EN 13888 CG2 WA
Remark: multipurpose and easy
to apply
118
• Rapid crystalline binding of the mix water
• Protects sensitive materials against discoloration from the stone’s
own constituents
• Fulfills the requirements of CG2WA to DIN EN 13888
• Rapid setting
• Good application and wash-off properties
• Smooth consistency
• Free from quartz sand for grouting sensitive surfaces
• Free from silicosis causing fine quartz dust hazardous to health
• Protected against bacterial and fungal attack
• Can be ground down
• Vapour permeable • Pigmented
• Polymer modified
• Cures without cracks
• For floor and wall heating systems
• Colours matched to the ESCOSIL-2000-ST silicone system
• For joint up to 10 mm width
Art. no/Colour
E/Kg
E/Package
Packing/Europallet
see table
see table
see table
see table
BENFER
CRISTALLFUGE colours
Colour
Art. no.
Colour
E/Kg
E/Package kg
Packing/Europallet
204277002
White
3,00
15,00/5 kg bag
4 bags box/192 boxes
204277009
Silver Grey
3,00
15,00/5 kg bag
204277004
Grey
3,00
15,00/5 kg bag
204277007
Pearl Grey
3,00
15,00/5 kg bag
204277006
Beige
3,00
15,00/5 kg bag
204277003
Pergamon
3,00
15,00/5 kg bag
204277008
Nut Brown
3,00
15,00/5 kg bag
204277010
Titan Grey
3,00
15,00/5 kg bag
204277011
Slate Grey
3,00
15,00/5 kg bag
•CRISTALLFUGE is especially suitable for the discoloration free grouting of sensitive natural stone such as e.g. limestone,
Jura marble, Sohlhofener stone, sensitive light crystalline marble, granite and others. The application, initial set in the joint,
water retention and the wash-off
•performance are matched to these materials. The rapid crystalline binding of the mix water reliably prevents edge discoloration. CRISTALLFUGE can be used for joints up to 10 mm in interior and exterior areas, on walls and floors, in dry,
intermittently wet and wet areas. It is also possible to grout ceramic tiles such as earthenware, vitrified, fully vitrified tiles,
glass mosaics and it is especially suitable for grouting finishes with low water absorption and narrow joints such as e.g.
with fully vitrified tiles and glass tiles. CRISTALLFUGE is suitable for use in interiors in accordance with the AgBB evaluation
scheme (Committee for health related evaluation of building products), the French VOC byelaw and GEV-EMICODE.
CRISTALLFUGE - Consumption Size of the tile (cm)
Joint width (mm)
Joint depth (mm)
Approx. consumption per 10 m2 (kg)
2x2
2x2
10x10
1.5
1.5
3
2
10
6
5.8
29.2
7.3
20x30
30x30
30x40
30x60
30x60
30x90
3
3
3
3
3
3
8
10
10
10
20
20
4.4
4.1
4.8
3.1
6.2
5.5
Composition:
Joint widths: Pot life:
Foot traffic after:
Full service conditions: Water demand:
Consumption:
Cleaning:
Bulk density:
Wet mix density:
Packaging:
Storage:
special cement, mineral aggregates and high quality additives
from 1 mm to 10 mm
approx 30 min*
approx. 90 min*
1 day at the earliest*
1.20 – 1.45 litres / 5 kg
see consumption table
with water whilst in the fresh state
approx. 1.1 – 1.2 kg/dm3
approx. 1.9 kg/dm3
5 kg plastic bags
minimum 12 months when stored dry in the original unopened packaging.
*at 20° and 65%relative humidity
BENFER
119
DEKOGROUT
Antibacterial, flexible, smooth cement-based grout
• Antibacterial and mould resistant • Water repellent
• Resistant to freeze/thaw cycles • Free from hazardous silicaceous
fine quartz dust • Good application and wash-off properties
• Smooth surface and wide colour range (24 colours)
• For interior, exterior and under water
• Fulfils the requirements of EN 13888, CG2WA
• For joints from 1 - 6 mm wide • Vapor permeable
• Suitable for floor and wall heating • EC1: very low emission
• Colours matched to the DEKOSIL silicone system
Foot traffic after: Approx. 24
hours*
EN 13888 CG2WA
Remark: Antibacterial and
mould resistant
DEKOGROUT is suitable for grouting glass mosaic, vitrified and fully
vitrified clay tiles, brick tiles, tile slips, floor clinkers in bathrooms,
showers and living rooms, on terraces, balconies and loggia. As
well as facades, in swimming pools, commercial areas, and on
heated and flow screeds. Furthermore DEKOGROUT is suitable
for jointing of natural stones, if the product-specific properties
of the natural stone material permit this and discolouration (i.e.
through stones physical characteristics) can be eliminated. We
recommend CRISTALLFUGE for the jointing of natural stones.
Art. no/Colour
E/Kg
E/Package
Packing/Europallet
see table
see table
see table
see table
DEKOGROUT - Consumption DEKOGROUT for joints from 0 up to 6 mm
Coverage: kg per 10 m² of tiled surface
Size of the tile (cm)
120
Thickness (cm)
BENFER
Width of the joint (mm)
DEKOGROUT colours
Colour
Art.no.
Colour
Code
E/Kg
E/Package
Packing/Europallet
000005900
Bianco
Bianco
1,60
8,00 / 5 kg bag
4 bags box/27 boxes
000005902
Bianco
Bianco
1,40
28,00 / 20 kg bag
63 bags/ Europallet
000006040
Grigio chiaro
7035
1,60
8,00 / 5 kg bag
4 bags box/27 boxes
000006042
Grigio chiaro
7035
1,40
28,00 / 20 kg bag
63 bags/ Europallet
000006030
Grigio
7042
1,60
8,00 / 5 kg bag
4 bags box/27 boxes
000006032
Grigio
7042
1,40
28,00 / 20 kg bag
63 bags/ Europallet
000006020
Grigio tortora
Grigio tortora
1,60
8,00 / 5 kg bag
4 bags box/27 boxes
000006022
Grigio tortora
Grigio tortora
1,40
28,00 / 20 kg bag
63 bags/ Europallet
000005910
Grigio cemento
7030
1,60
8,00 / 5 kg bag
4 bags box/27 boxes
000005912
Grigio cemento
7030
1,40
28,00 / 20 kg bag
63 bags/ Europallet
000005980
Antracite
7037
1,60
8,00 / 5 kg bag
4 bags box/27 boxes
000005982
Antracite
7037
1,40
28,00 / 20 kg bag
63 bags/ Europallet
000005970
Nero
9004
1,80
9,00 / 5 kg bag
4 bags box/27 boxes
000005920
Off white
Off white
1,80
9,00 / 5 kg bag
4 bags box/27 boxes
000005930
Crema marfil
9001
1,80
9,00 / 5 kg bag
4 bags box/27 boxes
000005940
Travertino
Travertino
1,80
9,00 / 5 kg bag
4 bags box/27 boxes
000005960
Beige
1013
1,80
9,00 / 5 kg bag
4 bags box/27 boxes
000005950
Camel
1001
1,80
9,00 / 5 kg bag
4 bags box/27 boxes
000006010
Tabacco
8007
2,20
11,00 / 5 kg bag
4 bags box/27 boxes
000006000
Marrone
8011
2,20
11,00 / 5 kg bag
4 bags box/27 boxes
000005990
Testa di moro
8017
2,20
11,00 / 5 kg bag
4 bags box/27 boxes
000006050
Giallo
1012
2,20
11,00 / 5 kg bag
4 bags box/27 boxes
000006060
Verde
6019
2,40
12,00 / 5 kg bag
4 bags box/27 boxes
000006070
Smeraldo
6024
2,60
13,00 / 5 kg bag
4 bags box/27 boxes
000006080
Crocus
Crocus
2,00
10,00 / 5 kg bag
4 bags box/27 boxes
000006090
Azzurro
5012
2,40
12,00 / 5 kg bag
4 bags box/27 boxes
000006100
Blu
5013
2,80
14,00 / 5 kg bag
4 bags box/27 boxes
000006110
Magnolia
3012
2,20
11,00 / 5 kg bag
4 bags box/27 boxes
000006120
Rosa
3014
2,00
10,00 / 5 kg bag
4 bags box/27 boxes
000006130
Rosso maranello 3003
3,00
15,00 / 5 kg bag
4 bags box/27 boxes
N.B. The colours shown in this chart are reproduced as real as possible, but they are indicative only.They must in any event be verified
by the end user, who assumes all liabilities deriving from utilization of the product.
Basis:
Pot life:
Joint width:
Traffic after:
Loadable after:
Storage:
Water demand:
Cleaning:
Loose density:
Fresh mortar density:
Cement, mineral aggregates and high-quality additives
Approx. 30 minutes*
1 to 6 mm
Approx 24 hours*
At the earliest 3 day*
18 months in original unopened packaging. Use opened packaging immediately
App. 25% , 1.2 – 1.3 l / 5 kg
Approx. 1,2 kg/dm3
Approx. 1,9 kg/dm3
BENFER
121
DEKOGROUT 2/12
Antibacterial, flexible, cement-based grout
hours*
EN 13888 CG2WA
Remark: Antibacterial and
mould resistant
•
•
•
•
•
•
•
•
•
•
•
•
Antibacterial and mould resistant
Water repellent
Resistant to freeze/thaw cycles
Free from hazardous silicaceous fine quartz dust
Good application and wash-off properties
For interior, exterior and under water
Fulfils the requirements of EN 13888, CG2WA
For joints from 2-12 mm wide
Vapor permeable
Suitable for floor and wall heating
EC1: very low emission
Colours matched to the DEKOSIL silicone system
Art. no/Colour
E/Kg
E/Package
Packing/Europallet
see table
see table
see table
see table
Special flexible grout with rapid setting, for joints from 2 to 12 mm in wide.
DEKOGROUT 2/12 grouts are composed of special cements, aggregates with
a choice of granulometry and additives, it was designed to harden rapidly with
minimum shrinkage to provide elevated mechanical resistance, good flexibility
and minimum water absorption united with an attractive aesthetic appearance.
They are available in various colors.
Appearance:
Slightly granular powder
Storage:
In the original closed package, in a cool dry place
Duration: 12 months
Toxicity:
Inflammability:No
Mix ratio:
22% - 23% of powder
Volumetric mass of mix:
≈ 2 g/cm³
Mixture pot life:
30 minutes*
Walkover time:
4 hours*
Ready for normal use:
1 day*
Conforms to (EN 13888):
CG2WA
122
BENFER
DEKOGROUT 2/12 colours
Colour
Art. no.
Colour
Code
E/Kg
E/Package kg
Packing/Europallet
000006150
Bianco
Bianco
1,60
8,00/5 kg bag
4 bags box/27 boxes
000006170
Bianco
Bianco
1,40
28,00/20 kg bag
63 bags/ Europallet
000006152
Grigio chiaro
7035
1,60
8,00/5 kg bag
4 bags box/27 boxes
000006172
Grigio chiaro
7035
1,40
28,00/20 kg bag
63 bags/ Europallet
000006154
Grigio
7042
1,60
8,00/5 kg bag
4 bags box/27 boxes
000006174
Grigio
7042
1,40
28,00/20 kg bag
63 bags/ Europallet
000006156
Grigio tortora
Grigio tortora 1,60
8,00/5 kg bag
4 bags box/27 boxes
000006176
Grigio tortora
Grigio tortora 1,40
28,00/20 kg bag
63 bags/ Europallet
000006158
Grigio cemento
7030
1,60
8,00/5 kg bag
4 bags box/27 boxes
000006178
Grigio cemento
7030
1,40
28,00/20 kg bag
63 bags/ Europallet
000006160
Antracite
7037
1,60
8,00/5 kg bag
4 bags box/27 boxes
000006180
Antracite
7037
1,40
28,00/20 kg bag
63 bags/ Europallet
000006162
Off white
Off white
1,80
9,00/5 kg bag
4 bags box/27 boxes
000006164
Crema marfil
9001
1,80
9,00/5 kg bag
4 bags box/27 boxes
000006166
Travertino
Travertino
1,80
9,00/5 kg bag
4 bags box/27 boxes
000006168
Beige
1013
1,80
9,00/5 kg bag
4 bags box/27 boxes
DEKOGROUT 2/12 - Coverage tableDEKOGROUT for joints from 2 up to 12 mm. Coverage: kg per 10 m² of tiled surface
2x2
5x5
10 x 10
10 x 10
12,5 x 12,5
10 x 20
15 x 15
15 x 15
20 x 20
20 x 20
25 x 25
25 x 35
30 x 30
30 x 30
35 x 35
40 x 40
30 x 60
60 x 60
Thickness (cm)
0,4
0,4
1,0
0,6
1,0
0,8
1,4
0,8
0,4
0,8
1,0
1,0
1,4
0,8
0,8
1,0
1,0
1,0
2
10,5
7,0
8,0
5,5
7,0
5,5
8,0
5,0
6,0
4,0
4,0
4,0
5,0
3,5
3,5
3,5
3,5
3,0
3
15,0
9,5
11,0
7,5
9,5
7,5
11,0
7,0
8,5
5,5
5,5
5,5
7,0
4,5
4,5
4,5
4,5
3,5
4
19,5
12,0
14,5
9,5
12,0
9,5
14,0
9,0
10,5
7,0
7,0
7,0
9,0
5,5
5,5
5,5
5,,5
4,0
BENFER
5
24,0
14,5
18,0
11,0
14,5
11,0
17,5
10,5
13,0
8,0
8,0
8,0
10,5
7,0
7,0
6,5
6,5
5,0
7
33,5
19,5
24,0
15,0
19,5
15,0
24,0
14,0
17,5
10,5
10,5
10,5
14,0
9,0
9,0
8,5
8,5
6,0
10
47,0
27,5
34,0
21,0
27,5
21,0
33,5
19,5
24,0
14,5
14,5
14,5
19,5
12,0
12,0
11,0
11,0
8,0
12
56,0
32,5
40,5
25,0
32,5
25,0
39,5
23,5
29,0
17,0
17,0
17,0
23,5
14,0
14,0
13,0
13,0
9,5
123
HF05-Brillantfuge
High strength, flexible cement-based grout
hours*
EN 13888 CG2WA
Remark: Increased abrasion
resistance
•
•
•
•
•
•
•
•
•
•
•
•
•
•
High strength, cement-based grout
Increased abrasion resistance
Water repellent
Resistant to freeze/thaw cycles
Mould resistant
Resistant to high pressure cleaning
Free from hazardous silicaceous fine quartz dust
For interior, exterior and under water
Fulfils the requirements of EN 13888, CG2WA
For joints from 3 - 20 mm wide
Vapour permeable
Good application and wash-off properties
Suitable for floor and wall heating
Colourways matched to the DEKOSIL silicone system
Art. no/Colour
E/Kg
E/Package
Packing/Europallet
see table
see table
see table
see table
Due to its high mechanical performance and abrasion resistance, HF05
Brillantfuge is especially suitable for grouting tiles in swimming pools, washing
plants, commercial kitchens, sales rooms, commercial areas, industrial areas and
workshops. Furthermore HF05-Brillantfuge can be used on heated and flow screeds
in bathrooms, showers and living rooms, on terraces, balconies and loggia as
well as facades. HF05-Brillantfuge can be used in heavy-duty areas e.g. where
cleaning equipment, high pressure steam cleaning or scouring vacuums are present.
Furthermore the dense grout joints give increased resistance to cleaning chemicals.
Neutral or alkaline cleaners can be used unrestricted.Compared to conventional
cementbased grouts, HF05-Brillantfuge has increased resistance to acidic cleaners.
Basis:
Cement, mineral aggregates, high-quality additives and pigments
Colour:
Off-white, Beige, Travertino, Grigio cemento, Grigio chiaro
Surface/application temperature:
Pot life:
Approx. 90 minutes*
Joint width:
From 3 to 20 mm
Traffic after:
Approx. 6 hours*
Fully cured:
7 days* at the earliest
Compressive strength:Approx. 66 N/mm² after 28 days* to DIN EN 12808-2
Flexural strength:Approx. 9 N/mm² after 28 days* to DIN EN 12808-2
Storage:
124
BENFER
No.art.
Colour
Code
E/Kg
E/Package kg
Packing/Europallet
000012038
Off white
Off white
1,00
25,00 / 25 kg bag
42 bags/Europallet
000012036
Beige
1013
1,00
25,00 / 25 kg bag
42 bags/Europallet
000012034
Travertino
Travertino
1,00
25,00 / 25 kg bag
42 bags/Europallet
000012030
Grigio cemento
7030
1,00
25,00 / 25 kg bag
42 bags/Europallet
000012032
Grigio chiaro
7035
1,00
25,00 / 25 kg bag
42 bags/Europallet
Colour
HF05-Brillantfuge - Consumption Size of the tile (cm)
Joint width (mm)
Joint depth (mm)
Approx. consumption per 10 m2 (kg)
20x20
30x30
30x30
4
5
5
8
8
12
5,5
4,6
6,8
30x30
24x11,5
24x11,5
40x40
60x60
10
10
10
10
10
12
12
20
12
12
13,6
26,2
43,8
10,2
7
BENFER
125
PRIMAFUGA 2/12
Pot life: 1 hour*
EN13888 CG2WA
Remark: Floor and wall, inside
and outside
• Grouting of joints between ceramic floor and wall tiles of all
types and sizes, both indoors and outdoors
• By adding Cemlatex Giunti, the product is recommended for
grouting joints in:
- systems subject to slight dimensional variations
- heated floors
- tiled areas subject to adverse environmental conditions, such
as swimming pools,
cold rooms, terraces, and surfaces with a high degree of
exposure to water
- flooring in areas subject to intense traffic, such as supermarkets,
motorway service stations, shopping centres, and public
premises in general
- old flooring with deteriorated joints
Art. no/Colour
E/Kg
E/Package
Packing/Europallet
see table
see table
see table
see table
Special grout for ceramic floor and wall coverings, it is composed of cement,
aggregates with chosen granulometry and additives. It was designed for rapid
hardening with minimum shrinkage to provide elevated mechanical resistance
united with an attractive aesthetic appearance. For the filling of joints from 2 to
12 millimeters in width. Available in 13 colors. For interiors and exteriors.
Appearance:
Storage:
Duration: 12 months
Toxicity:
Inflammability:No
Mix ratio:
23% - 25% of powder
≈ 2 g/cm³
Mixture pot life:
1 hour*
Walkover time:
1 day*
2 days*
CG2WA
126
BENFER
PRIMAFUGA 2/12 colours
Colour
Art.no.
Colour
Code
E/Kg
E/Package kg
Packing/Pallet
000004510
Bianco
Bianco
1,20
6,00 / 5 kg bag
27 boxes pallet (4 bags/box)
000004700
Bianco
Bianco
1,00
25,00 / 25 kg bag
42 bags/pallet
000004500
Grigio chiaro
7035
1,20
6,00 / 5 kg bag
000004720
Grigio chiaro
7035
1,00
25,00 / 25 kg bag
42 bags/pallet
000004660
Grigio
7042
1,20
6,00 / 5 kg bag
000004661
Grigio
7042
1,00
25,00 / 25 kg bag
42 bags/pallet
000004670
Grigio tortora
Grigio tortora 1,20
6,00 / 5 kg bag
000004671
Grigio tortora
Grigio tortora 1,00
25,00 / 25 kg bag
42 bags/pallet
000004520
Grigio cemento 7030
1,20
6,00 / 5 kg bag
000004710
Grigio cemento 7030
1,00
25,00 / 25 kg bag
42 bags/pallet
000004530
Antracite
7037
1,20
6,00 / 5 kg bag
000004531
Antracite
7037
1,00
25,00 / 25 kg bag
42 bags/pallet
000004550
Off white
Off white
1,40
7,00 / 5 kg bag
000004590
Crema marfil
9001
1,40
7,00 / 5 kg bag
000004570
Travertino
Travertino
1,40
7,00 / 5 kg bag
000004560
Beige
1013
1,40
7,00 / 5 kg bag
000004580
Camel
1001
1,40
7,00 / 5 kg bag
000004600
Marrone
8011
1,80
9,00 / 5 kg bag
000004540
Nero
9004
1,40
7,00 / 5 kg bag
N.B. The colours shown in this chart are reproduced as real as possible, but they are indicative only.They must in any event be verified by the end user,
who assumes all liabilities deriving from utilization of the product.
PRIMAFUGA 2/12 - Coverage table PRIMAFUGA for joints from 2 to12 mm. Coverage : kg per 10 m² of tiled surface
2x2
5x5
10 x 10
10 x 10
12,5 x 12,5
10 x 20
15 x 15
15 x 15
20 x 20
20 x 20
25 x 25
25 x 35
30 x 30
30 x 30
35 x 35
40 x 40
30 x 60
60 x 60
Thickness (cm)
0,4
0,4
1,0
0,6
1,0
0,8
1,4
0,8
0,4
0,8
1,0
1,0
1,4
0,8
0,8
1,0
1,0
1,0
2
10,5
7,0
8,0
5,5
7,0
5,5
8,0
5,0
6,0
4,0
4,0
4,0
5,0
3,5
3,5
3,5
3,5
3,0
3
15,0
9,5
11,0
7,5
9,5
7,5
11,0
7,0
8,5
5,5
5,5
5,5
7,0
4,5
4,5
4,5
4,5
3,5
4
19,5
12,0
14,5
9,5
12,0
9,5
14,0
9,0
10,5
7,0
7,0
7,0
9,0
5,5
5,5
5,5
5,,5
4,0
BENFER
5
24,0
14,5
18,0
11,0
14,5
11,0
17,5
10,5
13,0
8,0
8,0
8,0
10,5
7,0
7,0
6,5
6,5
5,0
7
33,5
19,5
24,0
15,0
19,5
15,0
24,0
14,0
17,5
10,5
10,5
10,5
14,0
9,0
9,0
8,5
8,5
6,0
10
47,0
27,5
34,0
21,0
27,5
21,0
33,5
19,5
24,0
14,5
14,5
14,5
19,5
12,0
12,0
11,0
11,0
8,0
12
56,0
32,5
40,5
25,0
32,5
25,0
39,5
23,5
29,0
17,0
17,0
17,0
23,5
14,0
14,0
13,0
13,0
9,5
127
PRIMAFUGA 0/0
Hyperventilated talcum sealer for very narrow joints, from 0 up to 3 mm
• Filling of joints in rectified porcelain stoneware
• Joint-filling of all types and sizes of ceramics in interior and
exterior floor and wall coverings
• Extra-white
• Excellent workability
Pot life: 1 hour*
Foot traffic after: 2 days*
EN13888 CG2WA
‍ Remark: Extra-white
128
PRIMAFUGA 0-0 Extra-white is the first hyperventilated talcum
sealer for sealing very narrow joints. Composed of special
cements, aggregates with a choice of granulometry and innovative
synthetic additives, it was designed to harden rapidly with minimum
shrinkage to provide elevated mechanical resistance united with
an attractive aesthetic appearance. It is available only in the color
extra-white and is indicated for joints up to 3 millimeters in width.
Art. no/Colour
E/Kg
E/Package
Packing/Europallet
000001203/Extra-white
1,10
5,50/5 kg bag
24 boxes pallet
(5 bags each)
BENFER
PRIMAFUGA 0/0 Extrawhite - Coverage table Grout PRIMAFUGA for joint from 0 up to 3 mm. Coverage: kg per 10 m² of tiled surface
Thickness (cm)
Appearance:
Impalpable powder
Colour:Extra-white
Storage:
Duration: 12 months
Toxicity:
No. Possible irritation of skin and eyes after contact,due to the cement content
Inflammability:No
Mix ratio:
32% of powder
≈ 2 g/cm³
Mixture pot life:
1 hour*
2 days*
CG2WA
BENFER
129
PRIMAFUGA 0/5
Pot life: 1 hour*
EN13888 CG2
Remark: Floor and wall, inside
and outside
types and sizes, both indoors and outdoors
• By adding CEMLATEX GIUNTI, the product is recommended for
grouting joints in: systems subject to slight dimensional variations,
heated floors, tiled areas subject to adverse environmental
conditions, such as swimming pools, cold rooms, terraces, and
surfaces with a high degree of exposure to water, flooring in areas
subject to intense traffic, such as supermarkets, motorway service
stations, shopping centres, and public premises in general, old
flooring with deteriorated joints. Special grout for ceramic floor
and wall coverings composed of cement, aggregates with a
choice of granulometry and additives. It was designed to harden
rapidly with minimum shrinkage to provide elevated mechanical
resistance united with an attractive aesthetic appearance. For the
filling of joints from 0 to 5 millimeters in width. Available in 20
colors. For interiors and exteriors.
Art. no/Colour
E/Kg
E/Package
Packing/Europallet
see table
see table
see table
see table
For perfect grouting of joints, the mortar used for fixing the tiles must be sufficiently dry to prevent any residual humidity from
evaporating and creating unevenness in the colour of the grouting compound. If a specific cement-based adhesive has been
used, grouting can be carried out after just 24 hours for wall tiling and 1-2 days for floor tiling. If the substrate is already
completely dry, when working with absorbent tiles, especially in high temperatures, it is advisable to moisten the joints to be
filled, slightly and evenly. The joints must also be free from dust or other materials that may adversely affect adhesion.If it is
considered essential to fix twice-fired wall tiles in contact with each other (i.e. without any joint at all), it is vital to clean the
grouting compound with a damp sponge and moisten it again with the same system and more water the following day. If this
precaution is not taken, PRIMAFUGA 0-5 may fail to harden sufficiently, because by the time that the cement starts to set (after
about 4 hours), much of the water in the mix will have been absorbed by the tiles.
Appearance:
Impalpable powder
Storage:
12 months, in the original closed package, in a cool dry place
Toxicity:
Inflammability:No
Mix ratio:
30% of powder
≈ 2 g/cm³
Mixture pot life:
1 hour*
130
BENFER
PRIMAFUGA 0/5 Colour
Colour
Art.no.
Colour
Code
E/Package kg
E/Kg
Packing/Pallet
000001200
Bianco
01 Bianco
1,00
5,00/5 kg bag
000001250
Bianco
01 Bianco
0,95
19,00/20 kg bag 63 bags/pallet
000001215
Grigio chiaro
02 Grigio chiaro
1,05
5,25/5 kg bag
000001265
Grigio chiaro
02 Grigio chiaro
1,00
000001220
Grigio
03 Grigio
1,00
5,00/5 kg bag
000001270
Grigio
03 Grigio
0,95
000001233
Antracite
04 Antracite
1,05
5,25/5 kg bag
000001235
Nero
05 Nero
1,15
5,75/5 kg bag
000001202
Off white
06 Off white
1,05
5,25/5 kg bag
000001248
Crema marfil
19 Crema marfil
1,05
5,25/5 kg bag
000001249
Travertino
20 Travertino
1,05
5,25/5 kg bag
000001205
Beige
07 Beige
1,05
5,25/5 kg bag
000001243
Camel
09 Camel
1,25
6,25/5 kg bag
000001225
Tabacco
10 Tabacco
1,35
6,75/5 kg bag
000001230
Marrone
11 Marrone
1,35
6,75/5 kg bag
000002248
Giallo
08 Giallo
1,25
6,25/5 kg bag
000001223
Verde
12 Verde
2,10
10,50/5 kg bag
000001238
Crocus
13 Crocus
1,25
6,25/5 kg bag
000001245
Azzuro
14 Azzuro
1,45
7,25/5 kg bag
000001247
Blu
15 Blu
1,80
9,00/5 kg bag
000001240
Magnolia
16 Magnolia
1,35
6,75/5 kg bag
000001214
Rosa
17 Rosa
1,35
6,75/5 kg bag
000001210
Rosso
18 Rosso
2,90
14,50/5 kg bag
PRIMAFUGA 0/5 - Coverage table Grout PRIMAFUGA for joint from 0 up to 5 mm. Coverage: kg per 10 m² of tiled surface
Thickness (cm)
BENFER
131
PRIMAFUGA 5/15
Pot life: 1 hour*
EN13888 CG2WA
Remark: Simple and economic
types and sizes,both indoors and outdoors
• By adding CEMLATEX GIUNTI, the product is recommended
for grouting joints in: • systems subject to slight dimensional
variations • heated floors • tiled areas subject to adverse
environmental conditions, such as swimming pools, cold rooms,
terraces, and surfaces with a high degree of exposure to water
• flooring in areas subject to intense traffic, such as supermarkets,
motorway service stations, shopping centres, and public
premises in general • old flooring with deteriorated joints.
Special grout for ceramic floor and wall coverings, it is composed
of cement, aggregates with chosen granulometry and additives.
It was designed for rapid hardening with minimum shrinkage to
provide elevated mechanical resistance united with an attractive
aesthetic appearance. For the filling of joints from 5 to 15 millimeters
in width. Available in 2 colors. For interiors and exteriors.
Art. no/Colour
E/Kg
E/Package
Packing/Europallet
0,80
0,70
4,00/5 kg bag
14,00/20 kg bag
24 boxes pallet/(5 bags/box)
63 bags/pallet
000001310/Grey
000001360/Grey
0,80
0,70
4,00/5 kg bag
14,00/20 kg bag
24 boxes pallet/(5 bags/box)
63 bags/pallet
PRIMAFUGA 5/15 - Coverage table PRIMAFUGA for joints from 5 to15 mm. Coverage : kg per 10 m² of tiled surface
2x2
5x5
10 x 10
10 x 10
12,5 x 12,5
10 x 20
15 x 15
15 x 15
20 x 20
20 x 20
25 x 25
25 x 35
30 x 30
30 x 30
35 x 35
40 x 40
30 x 60
60 x 60
Thickness (cm)
0,4
0,4
1,0
0,6
1,0
0,8
1,4
0,8
0,4
0,8
1,0
1,0
0,4
0,8
0,8
1,0
1,0
1,0
2
10,5
7,0
8,0
5,5
7,0
5,5
8,0
5,0
6,0
4,0
4,0
4,0
5,0
3,5
3,5
3,5
3,5
3,0
3
15,0
9,5
11,0
7,5
9,5
7,5
11,0
7,0
8,5
5,5
5,5
5,5
7,0
4,5
4,5
4,5
4,5
3,5
4
19,5
12,0
14,5
9,5
12,0
9,5
14,0
9,0
10,5
7,0
7,0
7,0
9,0
5,5
5,5
5,5
5,,5
4,0
5
24,0
14,5
18,0
11,0
14,5
11,0
17,5
10,5
13,0
8,0
8,0
8,0
10,5
7,0
7,0
6,5
6,5
5,0
7
33,5
19,5
24,0
15,0
19,5
15,0
24,0
14,0
17,5
10,5
10,5
10,5
14,0
9,0
9,0
8,5
8,5
6,0
10
47,0
27,5
34,0
21,0
27,5
21,0
33,5
19,5
24,0
14,5
14,5
14,5
19,5
12,0
12,0
11,0
11,0
8,0
12
56,0
32,5
40,5
25,0
32,5
25,0
39,5
23,5
29,0
17,0
17,0
17,0
23,5
14,0
14,0
13,0
13,0
9,5
15
5,50
3,35
4,40
3,35
5,40
3,10
3,90
2,25
2,25
2,25
3,10
1,85
1,85
1,70
1,70
1,20
Appearance:
Storage:
Duration: 12 months
Toxicity:
Inflammability:No
Mix ratio:
19% of powder
≈ 2,2 g/cm³
2 days*
132
BENFER
CEMLATEX GIUNTI
•Its characteristics united with those of Benfer grouts created
brilliant solutions to joint filling problems in:
- systems that are subject to slight dimensional variations
- heated floors
- wall and floor coverings subject to harsh environmental
conditions such as swimming pools, walk-in refrigerators,
terraces and surfaces very exposed to water
- floors located in heavily trafficked areas such as
supermarkets, highway rest stops, malls, and public places
in general
- old floors with deteriorated joints
Consumption: Substitution of
water in mixture
EN13888 CG2WA
Remark: Improves performance
Art. no/Colour
E/Kg
E/Package
Packing/Europallet
000001530/White
000001540/White
3,80
5,50
19,00/5 kg can
5,50/1 kg pot
100 cans/pallet
12 pots/box
It is a polymeric dispersion additive for Benfer cement joint grouts to improve
elasticity, waterproofing, mechanical resistance and adhesion.
Appearance:
White latex
Storage:
In the original unopened packaging, protected from frost
Duration:
Toxicity:No
Inflammability:No
pH:
Approx. 9
Density:
Approx. 1,02 kg/dm³
Resistance to temperature extremes: From - 30°C to + 90°C
Coverage: Substitution of water in mixture
BENFER
133
DKWALL
Brick, synthetic and natural stone wall grout
• Good application and wash-off properties • Smooth consistency
• Free from quartz sand for grouting sensitive surfaces • Free from
silicosis causing fine quartz dust hazardous to health • Vapour
permeable • Pigmented • Polymer modified • Cures without
cracks • For wall only • For joint up to 30 mm width
Areas of application: DKWALL is especially suitable for the
grouting of traditional brick, listello, synthetic and natural stone
wall grout. The soft and creamy consistency allow the application
with a compressed air gun or a plastic bag and the initial set in
the joint, the water retention and the wash-off performance are
matched to these materials. DKWALL can be used for joints up
to 30 mm in interior and exterior areas, on walls only, in dry,
intermittently wet and wet areas.
Art. no/Colour
E/Kg
E/Package
Packing/Europallet
see table
see table
see table
see table
Remark: Very easy to apply
DKWALL - Coverage table Size of the tile (cm)
19
19
21
21
25
25
x
x
x
x
x
x
5,0
6,5
5,0
6,5
5,5
5,0
x
x
x
x
x
x
2
2
2
2
2
3
Joint width (mm)
5
1,75
1,50
1,75
1,50
1,75
3,25
10
3,50
3,00
3,50
3,00
3,50
6,50
15
5,25
4,50
5,25
4,50
6,00
10,00
20
7,25
6,00
7,00
6,00
6,50
13,50
25
9,00
7,50
9,00
7,35
8,00
16,00
Consumption: 1,4 Kg/lt
Product in Powder
Basis:powder
Colour:
White, Off White, Beige 1013, Grigio Chiaro 7035,
Grigio Cemento 7030
Grain size:
0-0,5 mm
Density:
1,60 Kg/m³
Storage:
Mix ratio:
17% (4,0 – 4,5 liters/25kg bag)
Product Fresh Mix
Density:
1,60 Kg/m³
Mix ratio:
17% (4,0 – 4,5 liters/25kg bag)
Pot life:
60 minutes
Consumption:
1,4 Kg powder/mixed liter
Product hardened product
Reaction to fire:
Class A1
Water absorption by capillarity:
</= 0,4 Kg/m²·h 0,5
>/= 5 N/mm²
134
BENFER
30
10,50
9,00
10,50
9,00
10,00
20,00
Colour
No.art.
Colour
Code
E/Kg
E/Package kg
Packing/Europallet
000001090
Bianco
Bianco
1,00
25,00 / 25 kg bag
42 bags/Europallet
000001091
Off white
Off white
1,00
25,00 / 25 kg bag
42 bags/Europallet
000001092
Beige
1013
1,00
25,00 / 25 kg bag
42 bags/Europallet
000001093
Grigio cemento
7030
1,00
25,00 / 25 kg bag
42 bags/Europallet
000001094
Grigio chiaro
7035
1,00
25,00 / 25 kg bag
42 bags/Europallet
BENFER
135
DEKOGROUT-2K
Two part waterproof adhesive-grouting mixture. Igienic, acid, stain, bacteria and mould resistant.
Beautiful finish, easy to apply.
EN 13888 CG2WA,
EN 12004 R2T
Remark: Easy cleaning with
water
• Antibacterial and mould resistant • Water repellent • Resistant
to freeze/thaw cycles • Good application and wash-off properties
• Smooth surface and wide colour range (24 colours) • Resistant
to chemical and mechanical loads • For interior, exterior and
under water • Fulfils the requirements of EN 13888, CG2 and
EN12004 R2T • For joints from 2 -10 mm wide • Suitable for floor
and wall heating • Colours matched to the DEKOSIL silicone system
DEKOGROUT-2K is a special two part product with an epoxy resin
base, selected quartzes and special additives suitable for sticking and
grouting all types of ceramic floorings and coverings onto a wide
variety of bases, waterproof and resistant to chemical and mechanical
loads. Designed to harden rapidly and without shrinking, easily
cleaned with water, DEKOGROUT-2K is waterproof, non-absorbent,
acid, stain, bacteria and mould resistant. It guarantees an aspect and
a resistance to ageing and a cleanliness of the joint that can not be
obtained with traditional grouts. DEKOGROUT-2K is available in 24
colours plus a clear version which can be enriched with coloured
glitter to give a “metallic” effect to enhance the beauty of the covering.
Art. no/Colour
E/Kg
E/Package
Packing/Europallet
see table
see table
see table
see table
DEKOGROUT-2K - Coverage table -
DEKOGROUT-2K for joints from 2 up to 10 mm.
Coverage: kg per 10 m² of tiled surface
136
Thickness (cm)
BENFER
DEKOGROUT-2K colours
Colour
No.art.
Colour
Code
E/Kg
E/Package kg
Packing/Europallet
000001550
Bianco
Bianco
12,00
30,00 / 2,5 kg bucket
80 buckets europallet
000001551
Bianco
Bianco
11,00
55,00 / 5 kg bucket
000001552
Grigio chiaro
7035
12,00
30,00 / 2,5 kg bucket
000001553
Grigio chiaro
7035
11,00
55,00 / 5 kg bucket
000001554
Grigio
7042
12,00
30,00 / 2,5 kg bucket
000001555
Grigio
7042
11,00
55,00 / 5 kg bucket
000001556
Grigio tortora
Grigio tortora 12,00
30,00 / 2,5 kg bucket
000001557
Grigio tortora
Grigio tortora 11,00
55,00 / 5 kg bucket
000001558
Grigio cemento 7030
12,00
30,00 / 2,5 kg bucket
000001559
Grigio cemento 7030
11,00
55,00 / 5 kg bucket
000001560
Antracite
7037
12,00
30,00 / 2,5 kg bucket
000001561
Nero
9004
12,00
30,00 / 2,5 kg bucket
000001562
Off white
Off white
12,00
30,00 / 2,5 kg bucket
000001563
Crema marfil
9001
12,00
30,00 / 2,5 kg bucket
000001564
Travertino
Travertino
12,00
30,00 / 2,5 kg bucket
000001565
Beige
1013
12,00
30,00 / 2,5 kg bucket
000001566
Camel
1001
12,00
30,00 / 2,5 kg bucket
000001567
Tabacco
8007
12,00
30,00 / 2,5 kg bucket
000001568
Marrone
8011
12,00
30,00 / 2,5 kg bucket
000001569
Testa di moro
8017
12,00
30,00 / 2,5 kg bucket
000001570
Giallo
1012
12,00
30,00 / 2,5 kg bucket
000001571
Verde
6019
12,00
30,00 / 2,5 kg bucket
000001572
Smeraldo
6024
12,00
30,00 / 2,5 kg bucket
000001573
Crocus
Crocus
12,00
30,00 / 2,5 kg bucket
000001574
Azzurro
5012
12,00
30,00 / 2,5 kg bucket
000001575
Blu
5013
12,00
30,00 / 2,5 kg bucket
000001576
Magnolia
3012
12,00
30,00 / 2,5 kg bucket
000001577
Rosa
3014
12,00
30,00 / 2,5 kg bucket
000001578
Rosso maranello 3003
12,00
30,00 / 2,5 kg bucket
Consistency:
Specific weight:
Storage:
Inflammable:
Mixing ratio:
Consistency of the mixing:
Specific weight:
Pot life:
Walk on:
Final hardening:
Complies to:
Part A
Part B
Doughy
Fluid paste
1,40 kg/dm³
0,95 kg/dm³
12 months in the original packings at + 10°C
No
No
Part A : Part B = 94:6
Very doughy
1,4 kg/dm³
45 minutes
From + 15°C to + 30°C
After 24 hours
After 15 days
EN 13888 CG2WA - EN 12004 R2T
BENFER
137
DEKOGROUT-2K KIT
Grouting kit for 2 m² of glass mosaic 20x20 mm
Grouting kit for 2 m² of glass mosaic 20x20 mm with DEKOGROUT-2K
water
Couleur
E/Package
Packing/Europallet
Available in 24 colours
80,00
27 boxes
CONTAINS
E/each
DEKOGROUT-2K
30,00
colored two components epoxy grout 2,5 kg
DEKOGROUT-2K CLEANER
12,00
for an easy cleaning after grouting 0,500 ml
DEKOFELT
6,00
special felt to remove the grout excess
DEKOSPONGE
10,00
special sponge designed for a perfect finish
138
BENFER
ASODUR®-CeraTec
Fine epoxy grout and adhesive
Consumption: approx.
1,40 kg/m²/mm thickness
EN 13888 RG,
EN 12004 R2T
• Tested to DIN EN 12004, R2 T • Protected against bacterial
and fungal attack • Smooth, creamy and effortless application
• Very good wash-off and cleaning properties • Attractive, even
grout finish • Low water absorption • High chemical resistance
• Heavy duty mechanical performance • For joint widths up to
10 mm • For walls and floors • For interior and exterior areas
• For heated substrates • Available in 4 colours
ASODUR-CeraTec is a solvent free two component system
based on epoxy resins. ASODUR-CeraTec is especially suitable
for narrow joints in tiled finishes. The ASODUR-CeraTec grout
exhibits a fine grained closed surface structure and even colour.
Furthermore ASODUR-CeraTec possesses exceptional slip
resistance so that glass and ceramic mosaics can be installed
in a thinbed of adhesive in wall areas. On floors, ASODURCeraTec is suitable for laying calibrated natural stone tiles as well
as ceramic finishes such as e.g. vitrified tiles, those with lower
water absorption ≤ 0.5% (fully vitrified), and synthetic stone tiles.
In the process ASODUR-CeraTec is effortless and simple to use
and can be washed-off with water whilst still fresh. ASODURCeraTec excels itself once cured through its hardness and high
tensile adhesion, compressive and flexural strengths. ASODURCeraTec is resistant to many acids, alkalis, solutions aggressive to
concrete, cleaning agents, sea water and brine.
Art. no/Colour
water
206151005/Silver grey
206151006/Silver grey
206151011/Black
206151012/Black
206151015/Nut brown
206151016/Nut brown
206151017/Beige
206151018/Beige
E/Kg
16,00
14,00
16,00
14,00
16,00
14,00
16,00
14,00
E/Package
48,00/3
84,00/6
48,00/3
84,00/6
48,00/3
84,00/6
48,00/3
84,00/6
kg
kg
kg
kg
kg
kg
kg
kg
bucket
bucket
bucket
bucket
bucket
bucket
bucket
bucket
Packing/Europallet
100
85
100
85
100
85
100
85
Buckets/europallet
Buckets/europallet
Buckets/europallet
Buckets/europallet
Buckets/europallet
Buckets/europallet
Buckets/europallet
Buckets/europallet
Basis: Viscosity:
Joint widths:
Adhesive bed thickness:
Density:
Mixing ratio:
Pot life:
Wash off:
Minimum cure temperature:
Substrate and application temperature:
Foot traffic after:
Light service/ full service:
Cleaning of tools:
Storage:
filled epoxy resin
trowelable consistency
1 mm to 10 mm
1 mm to 5 mm
approx.1,4 g / cm3 at + 23 ° C
100: 10 parts by weight
approx. 60 min at + 23 ° C.
after approx. 5 minutes, however within 60 minutes at + 23 ° C
10 ° C
+10 ° C up to +30 ° C , optimum at +15 ° C to +25 ° C.
16 hours at + 23 ° C.
after approx. 48 hours / 7 days at + 23 ° C
concrete failure
All tools must be thoroughly cleaned with water, to which washing up liquid has
been added, at every break in work
frost-free, minimum 12 months
BENFER
139
EPOXYJOINT
Two part antiacid adhesive-grouting mixture for joints
• Execution of joints in all types of ceramic floor and wall coverings
(excluding those with absorbent surfaces) up to 20 mm of width in:
- environments for food preparation use (dairies, butcheries,
wine canteens, dressed pork factories, cheese factories)
- swimming pools and tanks containing chemically aggressive
liquids
- laboratory counters, kitchen counters, hospitals
- anyplace where a covering that is long lasting, easy to clean
and attractive is desired
Bi-component anti-acid sealer-adhesive. It is a special bi-component
product based on epoxy resins, select quartz and special additives,
Adhesive: approx. 1,4 kg/m²
suitable for gluing and filling all types of ceramic floor and wall
and mm layer thickness
coverings on a variety of supports, with exceptional waterproof
EN 13888 RG, EN 12004 R2T qualities and resistance to chemical and mechanical aggression.
Designed to harden rapidly and without shrinkage and easy to clean
with water, Epoxyjoint is available in various colors that enhance the
appearance of the coverings and guarantee resistance to aging and
joint cleanliness that is not possible with traditional grouts.
Remark: ‍Efficient, cost effective
Colour
E/Package kg
Art. No.
Colour
Code
E/Kg
Packing/Pallet
000001400
Bianco
Bianco
8,20
41,00 / 5 kg bucket
80 buckets pallet
000001411
Grigio chiaro
7035
8,20
41,00 / 5 kg bucket
80 buckets pallet
000001410
Grigio
7030
8,20
41,00 / 5 kg bucket
80 buckets pallet
000001405
Beige
1013
8,20
41,00 / 5 kg bucket
80 buckets pallet
EPOXYJOINT - Coverage table Coverage: kg per 10 m² of tiled surface
Size of the tile
(cm)
Thickness
(cm)
Comp. A
Comp. B
Consistency:
Paste
Thick liquid
Storage:
12 months in the original pack if properly sealed at + 10°C
Danger of harm:
Harmful in contact with
Caustic and harmful in
skin and irritating in contact
contact with skin,
with eyes and skin. ingestion and inhalation.
May cause sensitization.
May cause sensitization.
Inflammability:No
Mixing ratio:
Comp. A / Comp. B 9,4:0,6
Specific weight:
1,6 kg/dm3
From + 12°C to + 30°C
15 days*
140
BENFER
ASODUR®-EK98-floor
Adhesive and grout
Pot life: 60 minutes at 23°C
Foot traffic after: 16 hours at
23°C
Adhesive: approx. 1,42 kg/m²
and mm layer thickness
EN 12004 R2T, EN 13888 RG
• Bonding ceramic tiles by the thin bed method to concrete,
screed, plaster/render, old tiled floors and other substrates in
accordance with DIN 18157, part 3.
• For grouting ceramic tiled finishes.
• For levelling small irregularities in concrete or screed and render.
• ASODUR-EK98-floor can be used in commercial kitchens,
laboratories, swimming pools, breweries, dairies, meat
processing plants and other food industry areas as well as in
the chemical industry
• ASODUR-EK98-floor is a component of the DENSARE-2002
System.
ASODUR-EK98-floor is a solvent-free two component epoxy resin
system. Once cured it excels through its hardness and high tensile
adhesion, compressive and flexural strengths.
ASODUR-EK98-floor is resistant to a range of acids, alkalis,
solutions aggressive to concrete, cleaning agents, seawater and
brine. It is water washable whilst still fresh. Tested in accordance
with DIN EN 12004, R2T.
Art. no/Colour
Remark: Special for food
industry
205748001/Mid-grey
E/Kg
E/Package
Packing/Europallet
13,60
81,60 /6 kg bucket
Coverage : Kg per m² of tiled surface
Ceramic surface
material
Format size (cm)
Width
(cm)
Approx.
consumption kg/m²
Tiles
Middle mosaic
Stoneware
Basis:
Density:
Mixing ratio:
Water washable:
Light duty use / full service conditions:
Compressive strength DIN1164, part 7): Flexural strength (DIN 1164, part 7):
E-modulus (DIN 1048, part 5):
Shear adhesion strength (DIN EN 12003): Cleaning of tools:
Storage:
Filled epoxy resin
Approx. 1.40 g/cm3 at +23° C
100 : 6,8 parts by weight
After approx. 15 mins but within 60 mins at +23° C
+ 10°C
After approx. 48 hrs/7 days at +23° C
Concrete failure
51.9 N/mm²
25.1 N/mm²
5,050 N/mm²
11.6 N/mm² after dry storage, 9.8 N/mm² after wet storage,
10.5 N/mm² after heat ageing
Whenever work is interrupted, clean all tools thoroughly with water
frost free, 18 months when stored cool and dry above +10° C in the
BENFER
141
ESCOSIL®-2000-ST
Natural stone silicone
•
•
•
•
•
•
•
•
•
•
•
Contains fungicide
Elastic
Resistant to weathering and ageing
Watertight
With good chemical resistance
For interiors and exteriors
One component
Solvent free
Non slump
Smooth paste consistency
For walls and floors
Consumption: Dependent on
joint volume
Remark: Special for natural
stone
Art. no/Colour
E/PC
E/Package
Packing/Europallet
205592010/Grey perle
16,00
280,00 / 20 Cartridge 310 ml
20 pcs box
205592001/White
16,00
280,00 / 20 Cartridge 310 ml
20 pcs box
205592006/Pergamon
16,00
280,00 / 20 Cartridge 310 ml
20 pcs box
205592011/Beige
16,00
280,00 / 20 Cartridge 310 ml
20 pcs box
205592002/Manhattan
16,00
280,00 / 20 Cartridge 310 ml
20 pcs box
205592008/Anthracite
16,00
280,00 / 20 Cartridge 310 ml
20 pcs box
205592016/Grey
16,00
280,00 / 20 Cartridge 310 ml
20 pcs box
205592014/TitanGrey
16,00
280,00 / 20 Cartridge 310 ml
20 pcs box
For the discolouration-free elastic jointing of natural stone finishes (e.g. marble,
granite, gneiss, sandstone etc.). No risk of migration of plasticizers or other
components that can lead to picture framing.
As a seal to wash basins, bath tubs, shower trays, door and window frames and
for sealing movements joints in surface finishes.
Basis:
Pure, unmodified neutral curing silicone sealant
Consistency:Paste
Specific gravity:
Approx. 1.01
Skin formation time:
Approx. 5 minutes at +23° C and 50% RH
Cure after 1 day:
Approx. 3 mm at +23° C and 50% RH
Shore-A hardness:
Approx. 30 to DIN 53 505
E modulus:
Approx. 0,48 - 0,55 N/mm2, 100% to DIN 53 504
Movement accommodation:
20%
Tensile strength:
Approx. 1.4 N/mm2 to DIN 53 504
Elongation at break:
Approx. 400% to DIN 53 504
From - 40°C to + 180°C
Storage:
12 months when stored dry, cool and free from frost in the original
unopened packaging
Packaging:
Polyethylene cartridges, 310 ml contents
Cleaning:
Whilst still fresh with AQUAFIN-Cleaner
142
BENFER
DEKOSIL
Silicone joint sealant
• Contains fungicide • Elastic • Resistant to weathering and
ageing • Watertight • Resistant to chemicals and chlorine
• For interiors and exteriors • One component • Solvent free
• Non slump • Smooth paste consistency • For walls and floors
• Conform : ISO 11600-G-25LM
CONFORM: ISO11600-G-25LM
Remark: Contains fungicide
DEKOGROUT
HF05Brillantfuge
Art.No./ DEKOSIL colour
DEKOSIL is used in sanitary applications for sealing connecting
joints between tiled finishes and wash-basins, bath-tubs, shower
trays, architraves and window frames; furthermore for sealing
movement joints in wall and floor areas. For interior and exterior
use. Not suitable for aquariums. Not suitable for jointing natural
stone or in underwater areas. For natural stone, it's recommended
ESCOSIL-2000-ST and for underwater it's recommended
ESCOSIL-2000-UW.
Colour
E/PC
E/Package
Packing/Europallet
8,00
96,00/12 Cartridge 310 ml
12 pcs box
000004046/Bianco
000004047/Grigio chiaro
|
000004048/Grigio
000004050/Grigio cemento
|
|
Bianco
8,00
12 pcs box
|
Grigio chiaro
10,00
12 pcs box
|
Grigio
10,00
12 pcs box
|
Grigio tortora
10,00
12 pcs box
Grigio cemento 10,00
12 pcs box
|
000004051/Antracite
|
Antracite
10,00
12 pcs box
000004052/Nero
|
Nero
10,00
12 pcs box
|
Off white
10,00
12 pcs box
|
Crema Marfil
10,00
12 pcs box
|
|
Beige
10,00
12 pcs box
|
|
Travertino
10,00
12 pcs box
|
Marrone
10,00
12 pcs box
|
Testa di moro
10,00
12 pcs box
|
000004055/Beige
000004056/Travertino
000004057/Marrone
DEKOSIL Coverage table
Specific Gravity:
SHORE A
Cure time:
Elastic modulus:
Tensile strength:
Movement capability:
Application temperature
Storage:
ISO 1183-1A) 0,98 - 1,00 g/cm3
(ISO 868) 18 - 25 °
(23°C, 50% H.R.) aprox. 3 mm/24h
(100%) (ISO 8339) aprox. 0,4 MPa
(ISO 8339) aprox. 0,7 MPa
(ISO 8339) aprox. 250 %
25%
+ 5°C to + 40°C
18 months, in the original unopened
packaging in a dry and cool place.
NB: For further information regarding safety and handling refer to the
Safety Data Sheet .
BENFER
Joint's size
Linear meter per cartridge
5x5
5x10
10x10
15x10
20x10
25x10
30x15
40x20
11
5,4
2,7
1,8
1,35
1,10
0,63
0,36
143
ESCOSIL®-2000-UW
Silicone for underwater use
•
•
•
•
•
•
Non slump • Smooth paste consistency
High level of fungicide • Elastic
Resistant to weathering and ageing • Watertight
Resistant to chemicals and chlorine
For interiors and exteriors.
For walls and floors.
ESCOSIL-2000-UW is used for the elastic jointing of expansion
and construction joints in swimming pools, water features etc.
or where an especially high fungicidal performance is desired.
Not suitable for potable water or fish tanks.
Curing after 1 day:
approx. 2 – 3 mm
and chlorine
Art. no/Colour
E/PC
205591003/ Cement grey
205591008/Medium grey
E/Package
18,00 216,00/12 cartridge 310 ml
18,00 216,00/12 cartridge 310 ml
Packing/Pallet
12 cartridges box
12 cartridges box
Basis:
Colours: Consistency:
Specific gravity:
Application temp:
Skin formation:
Curing after 1 day:
Shore-A-hardness:
E module:
Tensile strength:
E module:
Storage:
Packaging: Cleaner:
144
pure, unmodified, neutral curing silicone sealant, silicone oils
medium grey, cement grey
paste, non slump
approx. 1.05 g/cm3
+5 °C to +35 °C
approx. 6 minutes at +23°C and 50% relative humidity
approx. 2 – 3 mm at +23 °C and 50% relative humidity
approx. 24 acc. to DIN 53505
approx. 0.35 N/mm2, 100% to DIN 53 504
25%
approx. 2.6 N/mm2 to DIN 53 504
approx. 400 – 600 % to DIN 53 504
approx. 450%, to DIN 53504
approx. 0.35 N/mm2, 100% to DIN 53 504
From - 40°C to + 180°C
dry and cool, 12 months in the original unopened packaging.
polyethylene cartridges, 310 ml contents (310 ml x 20 tubes per box)
AQUAFIN-Cleanser when in the fresh state
BENFER
BENFER
145
ANTIFUNGAL SILICONE SEALANT
• Sealing of joints between glasses, ceramic, aluminium,
rigid plastics
• For bathroom, kitchen and sanitary applications
• Sealing of gutters, down pipes and plumbing
• General bonding applications
ANTIFUNGAL SILICONE SEALANT BENFER is a universal
silicone sealant which cures with atmospheric moisture to a
permanently elastic seal with outstanding resistance to UV,
weathering, water, low and high temperatures.
joint volume
Remark: Universal, elastic
Art. no/Colour
E/PC
000004000/ White
000004010/Grey
000004025/Beige
4,80
4,80
4,80
4,80
Packing/Pallet
E/Package
115,20/24
115,20/24
115,20/24
115,20/24
Cartridge
Cartridge
Cartridge
Cartridge
280
280
280
280
ANTIFUNGAL SILICONE SEALANT
146
24
24
24
24
cartridges
cartridges
cartridges
cartridges
box
box
box
box
Coverage table
Joint's size
Linear meter per cartridge
5x5
5x10
10x10
15x10
20x10
25x10
30x15
40x20
11
5,4
2,7
1,8
1,35
1,10
0,63
0,36
Colour:
Density: Tooling time:
Tack free time:
Cure time:
ml
ml
ml
ml
White, grey, transparent, beige
1,00 kg/cm³
5-10 minutes*
15 minutes*
2 mm/24 hours*
From - 50°C to + 150°C
BENFER
ACRYLIC SEALANT
• Sealing of joints between window and door frames to masonry.
• Sealing of joints of moderate movement between concrete,
brickwork, wood.
Water-based sealant which cures by evaporation of water to an
elastic seal with good resistance to UV, weathering, low and high
temperatures.
Not suitable for applications with frequent or permanent water
immersion.
joint volume
Remark: Economic
Art. no/Colour
E/PC
E/Package
Packing/Pallet
000004040/ White
000004045/Grey
3,60
3,60
24 pcs box
24 pcs box
Colours:
Density:
Tooling time:
Tack free time:
Cure time:
White and grey
1,65 g/cm³
30 minutes*
60 minutes*
1 mm/24 hours
From - 40°C to + 80°C
BENFER
147
Primers for joint sealants
Primer-2000
Primer/Adhesion promoter
• EN 14188-2, ETA-09/0274
• Very good adhesion to non-porous substrates
Primer-2000 is used as an adhesion promoter for the sealants
INDUFLEX-TKF-2000, INDUFLEX-TKF-2000st and INDUFLEX-TKF2000mv to non-porous substrates such as e.g. mild steel, stainless
steel, aluminium, copper, zinc, glass, twin tiles, glazed ceramic,
PVC, polyester and melamine resin.
Consumption:
Max 10 ml/ linear metre
dependent on joint dimension
Art. no/Colour
E/PC
E/Package
36,00
36,00/1 lt tin
Packing/Europallet
Basis:
Density:
Flash off time:
Max. waiting time:
Cleaning:
Storage:
148
One component based on silane
Approx. 0,8 g/cm3
Min. 10 minutes and max 24 hours at +23° C and 75% RH
Approx. 4 hours
Work tools must be carefully cleaned immediately after use with the appropriate
cleaner e.g. acetone
Cool and dry above + 5°C, 18 months in the original unopened packaging
BENFER
Primers for joint sealants
Primer-2000-S
Primer/Adhesion promoter for porous contact areas
• • Very good adhesion to porous substrates
• Very good resistance to moisture, miscellaneous solvents, acids
and bases
Pot life: 2-3 hours*
Foot traffic after: 30 min* to 6 h*
Consumption:
Approx. 20-40 ml/m,
depending on the joint
dimensions and the porosity of
the substrate.
Primer-2000-S is used as an adhesion promoting primer on
porous contact areas such as e.g. concrete, cement-based
screeds, granite pavers for the sealants INDUFLEX-TKF-2000,
INDUFLEX-TKF-2000st and INDUFLEX-TKF-2000mv.
EN 14188-2, ETA-09/0274
Art. no/Colour
E/PC
E/Package
34,00
34,00/0,5 lt tin
Packing/Europallet
Basis:
Two component epoxy resin
Consistency:Brushable
Density:
Approx. 1,0 g/cm3
Pot life:
Approx. 2 to 3 hours*
Flash off time:
Min. 30 minutes*, max 6 hours*
Cleaning:
Work tools must be carefully cleaned immediately after usewith the appropriate cleaner
e.g. acetone
Storage:
Cool and dry above + 5°C, 18 months in the original unopened packaging.
* at +23°C, 75% RH
BENFER
149
ASODUR®-EP/FM
Epoxy polyurethane resin joint filler
• For sealing joints in heavy-duty industrial floors in internal areas
• 2 components solvent free, elastic, self leveling epoxy-polyurethane
resin
• Resistant to diluted acids, alkalis and salt solutions
ASODUR-EP/FM is a solvent-free flexible two component epoxypolyurethane liquid resin. In cured condition ASODUR-EP/FM is
resistant to water and weathering, resistant to waste water, sea
water, diluted bases and acids, brine, lubricants and fuel.
At dry wear ASODUR-EP/FM is resistant to temperature changes in
the range of -30 °C to +100 °C. However, the continuous use should
be limited to temperatures of -10 °C to +50 °C as the elasticity of
the material is depending on the temperature.
Consumption:
Approx. 1350 g/lt joint volume
Remark: self levelling
Art. no/Colour
E/lt
E/Package
Packing/Europallet
205792001/Grey
26,00
104,00/4 lt bin
84 bins/europallet
Basis:
Liquid epoxy polyurethane resin
Colour:
Grey (tends to yellowing)
Processing time:
40 min. at + 20°C, 15 min. at + 30°C
Minimum hardening temperature:+ 8 °C
Traversable:
After 16 hours at + 23°C
Completely hardened:
After 7 days at + 23°C
Shore-A hardness:
80
Bonding strength:
> 1,5 N/mm²
Joint movement:
< 3%
Top coating:
not possible
Cleaning of the tools:
Clean immediately after use with AQUAFIN-Cleanser
Delivery:
ASODUR-EP/FM is deliverable in bins of 4 kg resin and hardener are in the concerted
mixing ratio
Storage:
Storable in closed original bins for a period of 12 months in cool and dry rooms.
Regard the regulations for the storage of water endangering goods
150
BENFER
ASOFLEX-PU45
Elastic joint sealant
• One-component pigmented polyurethane sealant
• Light and UV stable characterised by high elasticity
• Good resistance to dilute acids and alkalis, salt solutions, neutral
water-based cleaners as well as hot oils and fats
ASOFLEX-PU45 is used as a joint sealant for floor joints in heavy
duty areas e.g. industrial areas, breweries, dairies, commercial
kitchens, balconies, terraces as well as between concrete elements
(with low movement accommodation up to 15 - 20% of the joint
width).
Consumption: Depending on
joint volume
Remark: accommodation up to
15 - 20% of the joint width
Art. no/Colour
E/PC
E/Package
Packing
203120002/Ral 7032
20,00
12 pcs box
Basis:
Density:
Shore-A-hardness:
Slump resistance:
Tensile strength:
Tear strength:
Volume change:
Recovery:
Max. joint width:
Min. joint width:
Min. depth:
Skin formation:
Speed of vulcanisation:
Resistance factor µ (H2O):
Cleaning:
Storage:
One-component polyurethane sealant (moisture curing)
Approx. 1,20 g/ml
Approx. 45
Very good
0,6 N/mm2 (at 100% elongation)
2,2 N/mm2
10,5 N/mm2
Approx. 15 - 20%
Approx. - 4%
Approx. 90%
30 mm
10 mm
8 mm
From + 3°C to + 40°C (substrate)
From - 40°C to + 90°C (up to + 120°C for short periods)
After approx. 35 minutes (Tnorm)
Approx. 3 to 4 mm per 24 hours
Approx. 1000
Thoroughly clean tools after use with AQUAFIN cleaner
12 months when stored cool and dry in the original sealed
packaging. Use opened packaging immediately
BENFER
151
INDUFLEX-VK6060
Elastic 1-component polyurethane joint sealing adhesive
•
•
•
•
•
•
Good chemical and mechanical resistance
Low sensitivity to chamfers
High resistance to tear propagation
Approved total deformation: 25%
Suitable for load classes A, B and C
Resistant to weathering and aging
Used for the elastic sealing of floor, wall and connecting joints in:
• parking decks, car parks, underground car parks, concreted
open spaces, store and manufacturing shops
• sewage and waste water treatment plants
• tunnel construction
• food industry e.g. industrial kitchens, dairies etc.
Remark: Good chemical and
mechanical resistance
No.art.
E/PC
E/Package
Packing
555108001
21,00
21,00/Cartridge 600 ml
20 pcs box
Basis:
1-Comp. Polyurethane
Consistency:Thixotropic
Density:
Approx. 1,30 g/cm3
Ambient temperature:
Skin formation:
60 - 90 minutes*
Curing rate:
Approx. 2 mm/24 hours*
Joint Dimensions:
Min. 10 mm/max 40 mm, dependant on mechanical loading
Working Time:
Approx. 2 hours at 23°C and 65% R.H.
Shore A hardness:
Approx. 35 after 28 days*
Tear Strength:
Approx. 8 N/mm
Tension:
Approx. 0,6 Mpa/100% Elongation*
Elongation at Break:
Approx. 700%*
Elastic Recovery:
> 80%*
Approved total deformation:
Approx. 25% of joint width
Service Temperature:
From - 40°C to + 80°C
Packaging:
600 ml sausages (1 carton = 20 sausages)
Storage:
15 months when stored cool and dry above + 10°C in the original cartridge
* at +20°C, 50% RH
152
BENFER
INDUFLEX-VK-TKF-2000mv
Polysulfide joint sealant - medium viscosity
• Medium viscosity
• Elastic
•Stable under compressive, tensile and shear loads
•Secure adhesive bond to concrete, cement-based screed, granite
pavers, asphalt and steel
•Impermeable to liquids, under permanent deformation
•High resistance to chemicals
•Resistant to fuels (including aviation fuel and bio-diesel)
•Free from solvents
• Secure adhesive bond to cured polysulfide sealants
Remark: suitable for horizontal
joints and joints up to a 10% fall
Art. no/Colour
E/Lt
E/Package
Packing/Europallet
555133001/Grey
36,00
360,00/10 lt container
28 pcs/Europallet
INDUFLEX-VK-TKF-2000mv is used in interior and exterior areas as a joint filler for the elastic sealing of floor and wall joints
between foot and vehicular trafficked construction elements.
In interior and exterior areas between foot and vehicular trafficked construction elements, e.g. industrial and commercial floors,
road construction, car parks, airports etc. It is suitable for horizontal joints and joints up to a 10% fall. For tramway track
construction between the tracks and the adjoining flooring, amongst others granite pavers or cut / abraded asphalt. Suitable
for joint widths up to 65 mm.
Basis:Polysulfide
Consistency:Flowable
Mixed density:
Approx. 1,60 g/cm3
Solids content:
100%
Solvent:None
Pot life:
Approx. 1,5 - 2 hours*
Through cure time:
Approx. 24 - 48 hours* (dependent on temperature)
Shore-A hardness:
Approx. 25
Permitted total deformation:
Approx. 25% of the joint width at a substrate temperature of + 10°C
Tensile modulus:
Approx. 0,24 N/mm2
Approx. 350%
Breaking strain:
Approx. 0,5 N/mm2
Modulus at 100% elongation:
Approx. 0,21 N/mm2
Resilience:
Approx. 90%
From - 40°C to + 120°C
Volume change:
0
Cleaning:
Work tools must be carefully cleaned immediately after use,
with an appropriate cleaner e.g. acetone.
Storage:
Cool and dry above +10° C, 12 months in the original unopened packaging
* at +23°C, 75% RH
BENFER
153
Repair mortars
INDUCRET-VARIO-10 and INDUCRET-VARIO-40
Rapid setting and rapid hardening mortars for reparation of concrete structures, for protection
against corrosion of reinforcing steel, for concrete surface protection.
INDUCRET-VARIO-10 and INDUCRET-VARIO-40 are antisag
cement based mortars with the following properties:
• Cement based mortar classified R4, rapid setting and
rapid hardening, for reparation of horizontal, vertical and
overhead concrete structures
• Water impermeable, it prevent reinforcing steel corrosion
• Impede the passage of CO2 • Cure with low shrinkage and
without cracks even under dynamic load
• Resistant to frost and de-icing salts
• For voids from 2 to 40 mm depth, maximum grain size: 0,5 mm
• Thanks to rapid setting and rapid hardening allows to make
small jobs in one day • Easy to smooth with float or sponge
• Can be sprayed onto the surface
• Water vapour permeable • Very low VOC emission
• Recyclable as aggregate • Contains regional aggregates
Conforms to:
EN 1504-3 CLASS R4, repair and structural recovery of
Pot life:
INDUCRET-VARIO-10 : 10 min* concrete
INDUCRET-VARIO-40 : 40 min* EN 1504-2 protection of concrete
EN 1504-7 protection against corrosion of steel reinforcement
Walkable after 2-3 hours*
Consumption:1,70 kg/m2/mm of concrete.
Art. No./Colour
Remark: allows to make small
jobs in one day
E/Kg
E/Package
Packing /Pallet
INDUCRET-VARIO-10
000012005/Grey
0,90 22,50/25 kg bag
60 bags/pallet
INDUCRET-VARIO-40
000012006/Gey
0,90 22,50/25 kg bag
60 bags/pallet
Consumption (mixed with water):
Approx. 1,7 kg/m²/mm thickness
Approx. 1 liter mixed material = for 2,04 kg
Areas of application: INDUCRET-VARIO-10
and INDUCRET-VARIO-40 are antisag cement
based mortars used for renovation of horizontal,
vertical and overhead concrete surface profiles
in thickness up to 40 mm and for reparation
of concrete structures under dynamic load
(under roadways, concrete rails). They are
suitable for reparation of pillars, of defects like
gravel pockets, ramps and industrial floors.
Thanks to their properties them allow fast and
easy operation because it is not necessary a
corrosion inhibitor application to reinforcing
steel, there is no need for an additional smoothing mortar and can be finished with a breathable paint after 3 hours only.
The pot life is:
INDUCRET-VARIO-40, 90’ at +5°C, 40’ at +20°C, 30’ at + 30°C
INDUCRET-VARIO-10 30’ at +5°C, 10’ at +20°C, 5’ at + 30°C
It is possible to mix INDUCRET-VARIO-40 with INDUCRET-VARIO-10 to obtain a different pot life.
154
BENFER
Repair mortars
INDUCRET-VARIO-40, 25 kg bag with 4,50- 5,0 liters of water
INDUCRET-VARIO-10, 25 Kg bag with 4,50 - 5,0 liters of water
Fill a mixing vessel with the above mentioned water quantity. Add the product under constant mixing with a suitable stirrer
(approx. 300 rpm). Mix thoroughly for approx. 3 – 5 minutes to a lump free mortar. Use a compulsory mixer for preparing
large quantities. Only mix as much material as can be used within the stated working life.
Application tools: Hand trowel, wood float, steel trowel, hand tools for smoothing, rubbing board.
Basis:
Component:
Particle size:
Bulk density:
Mixed density:
Pot life:
Compressive strenght:
Resistencia a la flexión:
Classification:
Storage:
Grey powder
1, to be mixed with water
Up to 0,5 mm
1,6 kg/dm³
2,1 kg/dm³
INDUCRET-VARIO-10 Approx. 10 minutes* to +20 °C
INDUCRET-VARIO-40 Approx. 40 minutes* to +20 °C
from +5 °C to +35 °C
20 N/mm² after 24 hours*
35 N/mm² after 7 days*
3 N/mm² after 24 hours*
9 N/mm² after 28 days
Conformes to EN 1504-3 CLASS R4
12 months i the original unopend packaging; Use opened packaging
promtly
BENFER
155
Repair mortars
BENFERCURE PLUS
High-resistance, anti-shrinkage fibre-reinforced, thixotropic cement mortar, for structural restoration of
deteriorated concrete
• Repair of concrete columns
• Repair of under-surfaces of concrete balconies
• Repair and finishing of concrete walls with defects such as
ballast nests and holescaused by spacers
• Repairs of concrete deteriorated by weather and the corrosion
of steel reinforcement bars
• Repairs of concrete industrial ramps and floors
• Shaving of concrete screeds before the laying tiled floors
• Conforms to EN 1504-3 Class R3
•
Pot life: 60 min*
thickness
EN 1504-3 CLASSE R3
Remark: High resistance
Art. no/Colour
E/Kg
E/Package
Packing/Europallet
000001421/Grey
0,72
18,00 / 25 kg bag
50 bags/europallet
BENFERCURE PLUS is a cement mortar in powder composed of high-resistance concrete,
selected gradation aggregate, synthetic resin, fibres and special additives. Its highresistance formulation has been created and developed for the rapid and safe repair of
horizontal and vertical concrete surfaces while at the same time restoring the mechanical
resistance. It is easy to work and has a high thixotropy allowing application of coats up
to 4 cm, even vertically. Once hardened, thanks to the excellent adhesion to the sub-base
and the elasticity and water-resistance, it guarantees a long life span even on surfaces
subject to abrasion from intense traffic.
BENFERCURE PLUS can be applied with a trowel or brush, even vertically, up to a maximum
thickness of four centimetres per coat for two coats.
The surfaces can be finished with a trowel while the mortar is setting or later with
BENFERFINISH.
Aspect:
Grey powder
Storage:
12 months, in the original closed package in a cool dry place
Toxicity:
Irritant. Possible irritation of skin and eyes after contact, due to the cement content
Inflammability:No
Mix ratio:
Water demand:
4,5 litres per bag of 25 kg bag
Minimum thickness application:
10 mm
40 mm per coat ( max. 2 coats)
Pot life:
60 minutes*
Waiting time between one coat
and another:
Maximum 3 hours*
* at +20°C, 65% RH
156
BENFER
Steel reinforcement treatment
BENFERCURE FERRI
Corrosion protector
• Anti-corrosion protection for concrete reinforcing rods
• Promoted adhesion during concrete pouring between the
old and fresh coats and between the concrete and repair
mortar
Pot life: Approx. 45 min*
Overloading after: 4 hours*
Remark: One composant
Art. no/Colour
E/Kg
E/Package
Packing/Europallet
000009000/Grey
4,40
8,80 /2 kg bucket
4 buckets parcel
Consumption:
Rods of 8 mm diameter: from 80 to 120 g/m = 16 - 25 m with a 2 kg package
Single component cement-based product in powder form, with selected
aggregates, polymers and special corrosion inhibitor additives.
Its formula was designed and developed to prevent the formation of rust on
reinforcing rods thanks to its waterproof and atmospheric gas-proof qualities and
its alkalinity.
When mixed with water it becomes a highly adhesive tixotropic mortar easy to
apply with a brush, also indicated as an adhesion promoter.
Colour:Grey
Basis:Cement
Components:1
Particle size:
Up to 0,5 mm
Bulk density:
1,2 kg/dm³
Working life:
Approx. 60 minutes*
Overcoat after:
min. 1 day*
Application temp:
Waiting time before application of second coat: Corrosion protection: min. 4 hours*, as soon as
the first coat will not be disturbed
Bonding agent: wet in wet with the repair mortar
* at +20°C, 65% RH
BENFER
157
Fast setting cements and mortars
FIX 10-S
Plugging cement
•
•
•
•
Chloride free
Highly reactive rapid setting cement
Immediately starts to set upon addition of water
Consumption: 2 kg/lt of void
Remark: Immediate
waterproofing of water leaks
Art. no/Colour
E/Kg
E/Package
Packing/Europallet
201819005/Grey
201819001/Grey
9,50
3,50
9,50/1 kg bucket
21,00/6 kg bucket
8 buckets box
Immediate waterproofing of water leaks, water penetration and seepage in
cellars, shafts, tunnels etc.
Product application:
Plugging of leaks can be achieved by pressing FIX 10-S, in the dry form, into
the leaking area by hand. If the leaking area is not sealed by the first plugging
attempt, FIX 10-S can be applied again followed by several coats of AQUAFIN-F,
which is then included within the surface applied waterproof membrane selected.
Basis:
Colour:
Bulk density:
Start of setting:
Consumption:
Storage:
158
cement, additives
cement grey
approx. 1.20 kg/dm3
+5° C to +30° C
immediately after water addition
approx. 2 kg per litre of void
dry, 12 months in the original unopened packaging.
BENFER
Fast setting cements and mortars
BENFERCEM
Fast setting mortar
• Blocking without reinforcement of frames, fixtures, poles, pipes,
sockets and electrical cables for interiors and exteriors
• Rapid repairs of deteriorated walls
• Filling of plaster gaps or cracks
• Can be used as an accelerator for normal mortars in construction
sites when there is danger of freezing
Pot life: 2 min*
Remark: Extremely fast
Art. no/Colour
E/Kg
E/Package
Packing/Pallet
000001442/Grey
000001420/Grey
0,66
0,42
3,30 / 5 kg bag
10,50 / 25 kg bag
24 boxes (5 bags each)
60 bags/pallet
It is a quick setting cement mortar for interiors and exteriors, frost-proof.
It consists of a mixture of grey cements, quartz aggregates and special additives
that are able to develop elevated mechanical resistance in very brief time intervals
with minimum shrinkage.
Consistency:
Colour:
Conservation:
Duration:
Danger of harm:
Flammability:
Mixing ratio:
Pot life:
Final performance:
Compressive strength after 15 minutes:
Compressive strength after 1 hour:
Compressive strength after 3 hours:
Compressive strength after 3 days:
Compressive strength after 28 days:
Resistance to temperature from:
Flexibility:
very doughy
grey
in the original closed package, in a cool dry place
9 months from the date listed on the package
no.Possible irritation of the eyes and skin for contact due to the cement content.
adequate protection is recommended.
no
23-25 parts water with 100 parts powder by weight
from + 2°C to + 35°C
2 minutes*
* at +20°C, 65% RH
6 N/mm²
9 N/mm²
15 N/mm²
25 N/mm²
40.5 N/mm²
- 30°C to + 90°C
poor
BENFER
159
Protective coatings
ASOCRET-BS2
Repair and resurfacing mortar
• Repairing and finish of ceiling and wall surfaces
• Suitable for concrete and precast concrete
• For interior and exterior applications
• For the filling of joints
Pot life: 30 min*
thickness
Remark: Easy to use, nice
finishing
Art. no/Colour
E/Kg
E/Package
Packing/Europallet
205506002/Grey
1,00
25,00/ 25 kg bag
42 bags/europallet
ASOCRET-BS2 is used as a filling and finishing mortar up to 10 mm in one coat
for concrete wall and ceiling areas.
It is also for levelling up uneven wall surfaces e.g. masonry work, cement renders
etc, which are to be waterproofed or tiled.
ASOCRET-BS2 is also suitable as a render for thicknesses from 5 - 10 mm.
ASOCRET-BS2 can be modified with ASOPLAST-MZ.
The additive imparts increased tensile adhesion strength, improved elasticity,
better water resistance and increased resistant to chemicals to the cured mortar.
It also acts against rapid water loss (dehydration).
Basis:
Colour:
Bulk density:
Pot life:
Cleaning tools:
Consumption:
Packaging:
Storage:
160
cement-based mortar
grey
1.3 kg/dm3
30 mins*
+5° C to +25° C
With water whilst still fresh. Dried material is difficult to remove
25 kg
BENFER
Protective coatings
BENFERFINISH EXTRA-WHITE, WHITE, GREY
Smoothing compound, with fine finishing, extra white, white or grey, for outside or inside
• Transpiring
•Colour extra-white, white or grey
•Good workability and easy resume of the work
•Good workability with the trowel and a pleasant finishing
•Good adhesion also on seasoned plasters
•Classification EN 998-1: mortar type GP, category CS II
•
Pot life: Up to 4 hours*
Waiting time before applying
the 2nd coat: 60-90 min*
thickness
Remark: Good workability
with the trowel and a pleasant
finishing
Field of application
For finishing and leveling irregularities on traditional or
premixed plasters, old and new ones, for outside and inside, of
residential, tertiary, commercial and industrial buildings.
Art. no/Colour
E/Kg
E/Package
Packing/Pallet
000001422/White
000001419/Grey
0,50
0,50
0,44
12,50/ 24 kg bag
12,50/ 25 kg bag
11,00/ 25 kg bag
60 bags/pallet
60 bags/ pallet
60 bags/ pallet
Substrates:
• Cement and lime based traditional or premixed plasters, new or seasoned
• Resistant and seasoned cement plasters
Gypsum support (plaster, panels or plasterboards), provided that you are using a
specific primer (BENFERPRIM o STARPRIM), apply two coats of primer and apply
then BENFERFINISH within a maximum of 2-3 hours.
Do not apply to:
• Plastic coatings, paint or painted or non-absorbent substrates
• Substrates with irregularities exceeding 5 mm
• Unstable plasters or crumbly or flaky substrates
Conservation:
6 months in the original closed package in a cool dry place
Danger of harm:
no. Possible irritation of the eyes and skin for contact due to the
Flammability:no
Mixing ratio:
White, grey 29÷31% , Extra-white 34÷36%
Mixing time with whip:
3 min, let the dough rest for about 5 minutes *
Pot life:
Up to 4 hours
Waiting time before applying the 2nd coat:
60-90 min*
Maximum thickness:
5 mm for white and grey, 3 mm for extra-white
Waiting time before applying decorative products:
21 days
Maximum grain size:
< 0,5 mm for white and grey, < 0,2 mm for extra-white
Density of hardened product:
1500 kg / m3
Adhesion on the substrate:
> 0,5 N / mm²
Flexural strength at 28 days:
> 1,5 N / mm²
Compressive strength at 28 days:
> 4,5 N / mm² Class CSII
Coefficient of resistance to the passage of steam:
μ <15
Reaction to fire (EN 13501-1: 2002):
Class A1
Thermal conductivity (val. tab. EN 1745: 2002):
λ = 0,5 W / mK
Water absorption:
Class W0
Consumption:
about 1,3 kg/m2/mm thickness
BENFER
161
Protective coatings
INDUCRET-OS/BF
Concrete glaze
• INDUCRET-OS/BF is a pigmented styrene acrylate polymer
dispersion.
• Alkali and UV resistant
• Water vapour permeable
• Vapour barrier to CO2
• Crack bridging ≤ 0.1 mm (with cracks near the surface)
Consumption:
Approx. 200 ml/m2 per coat
Remark: alkali and UV resistant
Art. no/Colour
E/Lt
E/Package
Packing/Europallet
205519001/RAL 7032
18,00
270,00/15 lt container
32 containers/europallet
INDUCRET-OS/BF is used in combination with INDUCRET-BIS-1/6 fine mortar as an
surface protection system OS4 to “Guidelines for the protection and restoration of
concrete sections” of the Rili-SIB.
INDUCRET-OS/BF is also used as a protective coat for cement-based substrates such
as concrete, render and INDUCRET mortars and smoothing compounds.
Basis:
Colour:
Density:
Solids content:
Workability time:
Drying time:
- Touch dry after:
- Rain proof after :
- Ready to overcoat after:
Diffusion resistance rate:
- μ H2O 5,500
- μ CO2 2,300,000
Equivalent air space thickness:
- sd H2O approx. 0.88 mm
- ss CO2 approx. 368 m
Cleaning:
Packaging:
Storage:
162
styrene acrylate dispersion
approx. RAL 7032 approx. RAL 9001
approx. 1.4 g/cm3
approx. 65% by weight
no limit
min. +10° C, max. +40° C
(at +20° C, 65% RH)
approx. 4 hrs
approx. 6 hrs
approx. 12 hrs
Works tools must be thoroughly cleaned with water immediately after use.
INDUCRET-OS/BF is available in 15 litre containers.
12 months when stored cool and dry in the original unopened container.
BENFER
BENFER
163
AQUAFIN®-2K/M
Two component, flexible, polymer-modified, cementitious waterproof coating
Pot life: 60 min*
Approx. 3,5-4,5 kg/m²
(depending on the stress level)
EN14891
Remark: The best one,
polyvalent
• Easy to use - can be brush, spray, roller or trowel applied
• Vapour permeable
• Waterproof - resistant to 5 bar (positive side water pressure)
• Can be tiled or left uncoated
• UV, weather and freeze-thaw resistant
• Bonds well to damp substrates without priming
• Approx. mentally friendly
• Resistant to concrete aggressive water according to DIN 4030
• Potable water approval according to DVGW W347
• Root resistance acc. to Swiss Society of Engineers & Architects:
SIA V 280 no. 11
Art. no/Colour
E/Kg
E/Package
Packing/Europallet
204278101/White Comp.A
0,94
1,20
42 Bags
42 Bags
204282001/Comp.B
(UNIFLEX-M)
8,50
85,00/10 kg bucket
Comp.B
40 Buckets
Set of 35 kg
(25 kg Comp.A Grey 10 kg Comp.B)
3,10
108,50/Set of 35 kg A+B
204281006/Set of 7 kg
(5 kg Comp.A + 2 kg Comp.B)
5,00
35,00/Set of 7 kg A+B
Colour pastes
000012070/Blue
000012074/Verde
48,00/0,6 kg can
48,00/0,6 kg can
0000120772/Beige
000012071/Crema Marfil
28,00/0,6 kg can
28,00/0,6 kg can
28,00/0,6 kg can
AQUAFIN-2K/M is a flexible elastomeric, 2-comp. polymer modified coating that waterproofs and protects concrete,
masonry, brick and some natural stone substrates with crack-bridging properties. AQUAFIN-2K/M has excellent adhesion
characteristics and provides a seamless system which can be left as the finished surface, or can be top-coated with tiles,
pavers, paint, or other coatings.
164
BENFER
Basis:
Mixing ratio:
Mixing time:
Density:
Pot life:
Time between re-coat:
Exposure to: Adhesion strength:
Tensile strength:
Elongation:
Crack bridging:
Water permeability:
Abrasion resistance:
Shore ‘A’:
Vapour diffusion resistance number:
Sd - value:
Sd - value, CO2:
Flammability class:
Comp. A
Comp.B (UNIFLEX- M)
powder cement and sand liquid polymer disp.
2,5 parts
1 part
2 - 3 min. (drilling machine min. 300 - 500 r/min)
1,5 g/cm3
Approx. 60 min. at + 23°C, 60% RH.
Approx. 20 min. at + 35°C, 65% RH
From + 5°C to + 35°C. Lower temperatures extend,
higher temperatures reduce curing times
Approx. 1,6 to 4 hours depending on climate conditions
- Rain after approx. 6 hours*
- Pedestrian traffic after approx. 1 day*
- Pressure water after approx. 7 days*
- Setting of tiles after approx. 1 day*
Approx. 1,5 n/mm2 at 28 d
4,2 N/mm2 (ASTM D 412-98a)
115% (ASTM D 412-98a)
2,60 mm (ASTM C 836:95)
110 mg (ASTM D 4060:01)
Approx. 85
Nil (BS 1881 Part 208:96)
85% reduction (ASTM-C 1202.97)
Approx. 1,000 μ
Approx. 2 m
Approx. 200 m
B2 (DIN 4102 Part 1)
* at ambient temperature of +20 °C and 60% RH, for higher temperatures
and RH consult the method statement for tropical climates
BENFER
165
AQUAFIN®-RS300
Rapid hybrid waterproof membrane
Pot life: 45 min*
Consumption:1,50 kg/m²/
mm thickness in accordance to
stress level
EN14891
Remark: Rapid reactive through
drying
• Seamless and joint free construction waterproofing and
waterproofing beneath tiles • Multi-functional
• Highly flexible crack bridging
• Self cross-linking hydraulic cure
• Rapid reactive through drying • Very low loss on drying
• After 3 hours resistant to rain and foot traffic and ready for
overcoating
• Vapour permeable, resistant to frost, UV and ageing
• Classified as resistant against highly aggressive” chemicals
acc. to DIN 4030 • Resistant to pressure
• Suitable for all load-bearing substrates conventional to
construction • Easy and very smooth application
• Highly slump resistant • Can be brushed, trowelled or
sprayed with suitable equipment • Solvent free
• Bonds without priming to matt-damp substrates
•
Art. no/Colour
E/Kg
E/Package
Packing/Europallet
204208003/Grey
204208001/Grey
7,60
7,00
Due to its reactive properties, AQUAFIN-RS300 is an efficient application as a
construction waterproofer and for waterproofing beneath tiles.
Construction waterproofing:
AQUAFIN-RS300 can be applied for waterproofing wall and floor areas, in new-build and buildings under redevelopment,
in contact with the ground where structural components are concrete or masonry work under the following conditions:
• Ground moisture/non-standing seepage water in accordance with DIN 18195 part 4
• Water not under pressure on surface areas and in wet rooms in accordance with DIN 18195, part 5
• Standing seepage water in accordance with DIN 18195, part 6
• Water under pressure in accordance with DIN 18195, part 6 (with suitable construction)
• Waterproofing against positive water pressure on the inside of container construction in accordance with DIN 18195,
part 7 (e.g. swimming pools, service water containers, effluent containers)
• Horizontal waterproofing in and beneath walls against capillary rising moisture
• The waterproofing of external walls in contact with the ground against standing seepage water and water under
pressure up to 3 m head of water including the transition zone to the concrete floor slab with high resistance to water
penetration (waterproof concrete)
• Combination waterproofing as well as transitions such as e.g. base plinth waterproofing
• Suitable for bonding protective and perimeter insulation When waterproofing containers the water must be analysed.
For the assessment of the degree of chemical attack please follow DIN 4030. AQUAFIN-RS300 is resistant up to
degree of attack “highly aggressive” (exposure class XA2).
166
BENFER
Liquid component Powder component
polymer dispersion special cement, functional fillers
1 part by weight1 part by weight
white grey
20 kg combined product, 10 kg bucket 2 x 5 kg bag
10 kg combined product, 5 kg bucket 5 kg bag
Combined product
Density: approx. 1.27 g/cm³
Pot life : approx. 45 minutes*
Substrate /application temp: +5° C to +35° C
> 1.0 N/mm²
Tensile strength to DIN 53504:approx. 1.0 N/mm² at +23° C
Elongation at break to DIN 53504: approx. 85% at +23° C
Crack bridging to DIN 14879-6 0.4 mm crack, held 24 hrs: passed
Watertightness in construction to PG MDS and AIV, (15 m WC): passed
Impermeability to negative hydrostatic pressure: 1,5 bar
Water vapour resistance factor μ with a 2 mm dry film thickness:approx. 1100
Sd value at 2 mm dry film thickness: approx. 2.5 m
Material consumption/dry film thickness:
From min. 3.0 kg/m2 / approx. 2 mm to min. 4.5 kg/m2 / approx. 3 mm, see TDS
Greater consumption must be factored in for uneven substrates.
Ready for use:
• Rainproof on surfaces to falls after approx. 3 hours*, avoid exposure to standing water
• from water under pressure after approx. 3 days*
• ready for tile installation after approx. 6 hours*
Storage:
frost free, 6 months in the
cool and dry, 6 months
Cleaning:
Clean tools with water whilst product is still fresh.
Soften dried on material with AQUAFIN-Cleanser and wash off.
Basis: Mixing ratio: Colour:
Packaging:
BENFER
167
AQUAFIN®-2K
Two-component, flexible waterproofing slurry
Pot life: 60 min*
24 hours*
Consumption: 3,5-4,5 kg/m² in
accordance to stress level
EN14891
Remark: Water impermeble to
7 bar
• Seamless and jointless, flexible, crack bridging waterproofing
compound • Suitable for all sound conventional construction
substrates • Hydraulic binder • Rainproof after a short time period
• Approx. mentally friendly • Simple economical application
• Bonds without priming on damp substrates • Can be sprayed with
suitable equipment, brush or trowel applied • Vapour permeable,
frost and resistant to ageing • Water impermeable to 7 bar
• Resistant to water aggressive to concrete in accordance with DIN
4030 • As a tanking system beneath tiling • General technical test
certificate available • Conforms to EN14891
For the effective and assured waterproofing of ground covered
building sections e.g. concrete, masonry work etc. against ground
moisture, water not under hydrostatic pressure and water under
hydrostatic pressure (with suitable construction) as well as for
horizontal waterproofing within and beneath masonry work. It is
furthermore suited for waterproofing planted concrete cold roofs
above underground garages, pre-fabricated garages, containers,
service water containers, effluent containers and pipework as well
as effluent sludge containers. When using in containers or when
exposed to soft water with a hardness < 30 mg/l then it is imperative
that the water is analysed. •
Art. no/Colour
E/Kg
E/Package
Packing/Europallet
Grey
204248001 Comp. A
204251001 Comp. B
5,70
2,60
15,00
45,60/ 8 kg (A+B)
30,00/2 kg bucket Comp.B
32 boxes (4 bags/box)
100 buckets
Grey
000012025 Comp. A
204251006 Comp. B
133,29/ 33,33 kg (A+B)
1,00
13,00 108,29/8,33 kg bucket Comp.B
42 bags/europallet
40 buckets
Waterproofing combined with tiled finishes:
For the effective and assured waterproofing in combination with tiled finishes
when longer term or frequent impermeability to water is required e.g. in private
bathrooms and kitchens, private and public sanitary areas as well as balconies
and terraces, swimming pools and pool surrounds. Reinforce the elastic surface
membrane at wall/floor junctions by incorporating ASO-Joint-Tape-2000 or ASOJoint-Tape- 2000-S, dependent on the type of wet duty exposure.
AQUAFIN-1K
UNIFLEX- B
Basis:
Sand/cement
Polymer dispersion
Mixing ratio:
3 parts by weight 1 part by weight
Mixing time:
3 minutes (mixing drill 300 rpm)
Storage:
Cool and dry, 12 months
Crack bridging:
Approx. 1 mm at 2 mm dry film thickness
Coefficient of vapour diffusion resistance μ:
Approx. 1000
Density of the mixed mortar:
Approx. 1,5 g/cm3
Cleaning tools:
In the fresh state with water, dried material is difficult to remove
Loading condition/material consumption/dry film thickness:
- Ground moisture/non standing backwater: Min. 3,5 kg/m2 = 2 mm
- Non hydrostatic water pressure:
Min. 3,5 kg/m2 = 2 mm
- Rising backwater / hydrostatic water pressure:Min. 4,5 kg/m2 = 2,5 mm
Dry film thickness:
The dry film thickness must be a minimum of 2 mm
168
BENFER
AQUAFIN®-1K
One component mineral-based waterproof slurry
Pot life: 60 min*
Consumption: 3,5-4,5 kg/m²
EN14891
Remark: Resistant to negative
hydrostatic pressure
• Rigid waterproof slurry • Sulphate resistant • For interior and
exterior use • For wall and floor • Water impermeable
• Suitable for all load-bearing conventional building substrates
• Hydraulic cure • Easy efficient application • Can be brushed,
trowelled or sprayed with suitable equipment • Bonds to matt
damp substrates without priming • Vapour permeable, resistant
to frost and ageing • Application schedule against negative
hydrostatic pressure • Application schedule against aqueous
solutions aggressive to concrete in accordance with DIN 4030
Waterproofing of new and existing buildings in ground covered
areas against ground moisture, seepage water and water under
pressure, water pressure from the inside, retrospective internal
waterproofing against damp penetrating from the exterior as well
as a horizontal membrane within and beneath walls and in building
plinth areas.
Art. no/Colour
E/Kg
E/Package
Packing/Europallet
000012025/Grey
204248001/Grey
1,00
2,60
25,00/25 kg bag
15,60/6 kg bag
42 bags/europallet
4 bags box
Weathered or greenery covered, concrete cold roofs above underground
garages, prefabricated garages, service water containers, waste water containers
and pipes, retaining walls and sluices. For use on wall or floor surfaces and for
retrospective treatment of substrates not at risk of cracking.
When using in containers or where there is exposure to soft water with a hardness
< 30 mg CaO/I then an analysis of the water is a fundamental requirement.
Evaluation of the aggressiveness towards concrete is carried out in accordance
with DIN 4030. AQUAFIN-1K is resistant up to attack grading “highly aggressive”
(exposure class XA2).
Basis:
sand/cement, polymer modified
Density of mixed mortar:
approx. 1.85 g/cm3
Mixing:
approx. 6.7 litres water per 25 kg AQUAFIN-1K approx. 1.6 litres water per 6 kg
+5° C to +35° C
Water impermeability, In accordance with DIN 12390-8 28 days, 1.5 bar: passed
Impermeability to water under negative hydrostatic pressure: 1.5 bar
Impermeability to water in situ (10 m water column): passed
Adhesion strength:
> 0.5 N/mm² (ASTM D 4541:2002)
Shore hardness D:
approx. 65 (ASTM D 2240:05)
Comp. strength 28d:
approx. 15 N/mm² (ASTM C 579)
approx. 25% reduction (ASTM C 1202.97)
Nil (BS 1881 Part 208:96)
Exposure class/material consumption/dry film thickness:
• Ground moisture/water:
• Seepage water / water under pressure:
It is necessary to apply 1.1 mm as a wet coat for every mm dry film.
Exposure *): Rainproof on surfaces to falls after approx. 8 hrs, avoid exposure to standing water, foot traffic after 1 day
Against hydrostatic pressure after 7 days
Cleaning tools:
with water whilst still fresh, difficult to remove once dried
Storage:
BENFER
169
COMBIDIC®-1K
Single component polymer modified high-build bituminous coating
•
•
•
•
•
•
•
Seamless, jointless crack-bridging waterproof membrane.
Suitable for all conventional substrates.
Can be trowel and spray applied.
Simple and effective application.
Solvent free.
Anionic emulsified
Conforms to DIN 18195 part 2
COMBIDIC-1K is suitable for waterproofing ground covered
building components such as cellar walls, foundations, floor slabs
or screeds, dependent on the severity of wet duty conditions:
• ground moisture
• seepage water
• pressure water
Consumption: 4-5 lt/m²
No.art./Colour
E/Lt
E/Package
Packing/Europallet
205011001/Black
205011002/Black
3,50
4,00
98,00 / 28 lt bucket
56,00 / 14 lt bucket
In order to achieve an adequate bond with the substrate, apply a preparation coat
of ASOL-FE diluted 1:5 with water or alternatively apply a coat of COMBIDIC-1K
diluted 1:5 with water.
Alternatively a scratch coat can be applied.
Once the preparation coat has fully dried COMBIDIC-1K is applied by trowel or
sprayed using suitable equipment such as e.g. HighPump M8 (peristaltic pump).
Basis:
Substrate condition:
Crack bridging:
Storage:
Cleaning:
One component, polystyrene filled high-build bitumen coating
Load bearing, flat, free from open joints,
damage etc., oil, grease, frost and dust
free as well as dry
> 2 mm
Frost free, 12 months
Rinse tools immediately with water or ASO-Kaltreiniger.
Dried material can only be removed with difficulty
Material requirements / dry film thickness:
Ground moisture/Non-standing drainage water:
4 litres/m2 approx. 3 mm
Non hydrostatic water pressure:
4 litres/m2 approx. 3 mm
Standing drainage water/Hydrostatic water pressure: 5 litres/m2 approx. 4 mm
Greater material consumption where there are background irregularities cannot be discounted
170
BENFER
COMBIFLEX®-EL
Bituminous high build waterproof coating
• Exterior waterproofing against: ground moisture, humidity,
pressure water (with suitable construction)
• Cationic
• Immediately rain-proof
• Environmentally friendly
• Simple and economical application
• Bonding caused by its own reaction of properties
(independant from air temperature)
• Application on dry or matt dry surfaces without priming
• General technical test certificate according to DIN 18195-2
available
•
Pot life: 45-60 min*
Consumption: 3,75 - 5 lt/m²
Remark: immediately rain-proof
No.art.
E/Lt
E/Package
Packing/Europallet
205035002
5,40
118,80 / 22 lt bucket
Two component bituminous high build waterproofing with lightweight fillers.
Ecologic, immediately rain proof, can be applied on wet or dry surfaces without
priming in a single coat. Low consumption.
Basis:
Substrate/Surface temperature:
Substrates:
Surface condition:
Two component, high build trowelable waterproofing compound
Masonry, concrete, plaster
Even surfaces, free of open joints, fractures, dry to moist, be free of oils, fat, frost
or dust, be of load carrying capacity
Pot life:
Approx. 45 to 60 minutes*
Crack bridging:
> 2 mm
Official tests:
MPA (material test institute) Dresden
Consumption
thickness of layer
Ground moisture, slope water:
Non pressure water: 3,75 lt/m2
to approx. 3 mm
Pressure water:
5 lt/m2
to approx. 4 mm
The consumption of material concerning uneven surfaces has not been taken into account.
Storage:
6 months in frost free storage in original closed containers.
Use already opened containers promptly
Cleaning agent:
Clean tools with water or with ASO-Kaltreiniger immediately after use.
Once cured material is difficult to remove
* at +20°C, 65% RH
BENFER
171
COMBIFLEX®-DS
Surface applied waterproof membrane
•
•
•
•
•
•
•
•
Ready to use
Bitumen-polymer combination
Water impermeable
Solvent free therefore environmentally friendly
Free from PCB and PCP
Can be brush or spray applied
For interior or exterior use
Radon barrier
Consumption: 1 - 1,5 lt/m²
Remark: Easy and economic
No.art.
E/Lt
E/Package
Packing/Europallet
205009002
5,60
156,80/ 28 lt bucket
COMBIFLEX-DS is used as a protective coating against seepage water, whether
under pressure or not under pressure, onto dense concrete or render on cellar
walls, foundations, manholes etc. It is also used as a horizontal waterproof
membrane against capillary rising damp beneath screeds on separating layers
or insulation.
Basis:
Colour:
Density:
Solid content:
Curing:
Surface temperature:
Substrates:
Priming:
Official tests:
Consumption:
Storage:
Cleaning agent:
Safety advice:
172
Bitumen/latex emulsion
Black brown
1,05 kg/dm3
61%
By drying
Not less than + 5°C
Dry or slightly wet, sound, free from fat and oil
ASO-Unigrund or COMBIFLEX-DS:water 1:10
Water impermeability up to 7 bar (DIN 1048)
Minimum 1 l/m2 against moisture and non-pressure water,
1,5 l/m2 on structure dense concrete against pressure water
12 months, frost free
Clean tools with water or ASO-Kaltreiniger immediately after use
Avoid contact with eyes
BENFER
ASOL-SM
Bituminous smoothing compound, fibre-reinforced
• Ready to use
• Contains solvent
• Asbestos free
• Watertight and water impermeable
• Resistant to UV rays, weathering, industrial gases and
naturally occurring aggressive materials in the ground
• Extensively flexible once cured
• For exterior use
Consumption: approx.
1,3 kg/m² per 1 mm thickness
Remark: Ready to use
ASOL-SM is suitable for smoothing and repair work in roof areas
e.g. on to fibre cement, roofing felt, hot-welded bitumen sheets,
lead and zinc.
Art. no/Colour
E/Kg
E/Package
Packing/Europallet
203009001/Black
10,40
52,00 / 5 kg bucket
ASOL-SM is supplied ready for use and can be used directly from the packaging.
Application is by trowel or steel float.
When fully coated, the thickness should not exceed 3 mm (bubble formation is
possible in warmer weather and under direct sunlight).
Basis:Bitumen
Solids content:
approx.73%
Viscosity: 1000 - 1500 mPa.s at + 20 ° C
Consumption:
approx. 1.3 kg/m2 per 1 mm thickness
+ 5°C à + 30° C
Packaging :
5 kg bucket
Storaage: 12 months when stored cool and dry in the original unopened packaging.
Cleaning:
Clean tools immediately after use with water or AQUAFIN-Cleanser
* at +20°C, 65% RH
BENFER
173
COMBIFLEX®-C2/S
Two component high build bitumen coating for spray application (to factory specification)
• Seamless, jointless, flexible crack-bridging waterproof
membrane • Suitable for all conventional substrates
• Can also be used on matt damp substrates without priming
• Quickly rainproof
• Rapid curing
• Simple and efficient application
• Radon barrier
• Cationic emulsified
• Solvent free
• Waterproof material to DIN 18195-2
• Certified for waterproofing of concrete joints in strips
•
Consumption: 4,5 - 6 lt/m²
Remark: Can be spryed
Art.No.
E/Lt
E/Package
Packing/Pallet
205017003
205017002
205017001
4,40
4,80
5,00
4.400,00 /1000 lt container
864,00 / 180 lt drum
140,00 /28 lt buket
1 container/pallet
4 drums/pallet
18 buckets/pallet
COMBIFLEX-C2/S is suitable for waterproofing ground covered building
components such as e.g. cellar walls, foundations, floor slabs or screeds,
dependent on the
severity of the wet duty conditions:
• Ground moisture
• Seepage water
• Pressure water
Basis:
2 component polymer modified high build bitumen coating
+5° C to +35° C
Lower temperatures extend, higher temperatures reduce curing times
approx. 10 sec.
min. 2 mm to DIN 28052-6
passed to DIN 52123 (slit pressure 1mm)
Reaction time:
Crack bridging:
Water impermeability:
Material consumption:
• Ground moisture, non-standing seepage water: 4.5 lt/m² = approx. 3.0 mm dry film thickness
• Standing seepage water:
6.0 lt/m² = approx. 4.0 mm dry film thickness
Greater material consumption for uneven substrates is not considered.
Packaging:
28, 180 and 1000 l containers
Storage:
6 months when stored frost free in the original unopened containers.
Use opened containers promptly.
Cleaning materials:
Clean tools immediately with water or AQUAFIN-Cleanser.
Dried on material can only be removed with difficulty.
174
BENFER
COMBIDIC®-2K
Two-component bituminous high build waterproofing
•
•
•
•
•
•
•
•
Seamless/jointless, crack bridging waterproofing
Two-component
Fast rain proof
Rapid hardening
Solvent free
Simple and economical handling
Trowelable
Pot life: 60 min*
Consumption: 4 -5 kg/m²
Remark: Fast rain proof
Art. No.
E/Kg
E/Package
Packing/Europallet
205012002
3,50
Below grade constructions requiring exterior waterproofing against:
• ground moisture and non-standing drainage water
• non-hydrostatic water pressure – moderate stress
• standing drainage water, hydrostatic water pressure
(with suitable construction)
• suitable as adhesive for insulation, protective and sewage plates/slabs
Basis:
Application-/Surface Temperature:
Pot life:
Application time:
Crack bridging:
Storage:
Cleaning materials:
2-component, polymer modified, bituminous high build coating
+ 5° C up to + 30° C
60 minutes*
approx. 2 to 3 hrs*, depending on temperature and humidity etc.
min. 2 mm
12 months when stored frost free in the original unopened containers.
Use opened containers promptly.
Clean tools immediately with water or AQUAFIN-Reiniger.
Dried on material can only be removed with difficulty.
* at +20°C, 65% RH
BENFER
175
ASOL-FE
Bituminous protection layer - non-polluting bituminous emulsion protective
• Protective coating resistant to earth moisture and aggressive
media in soil
• For concrete, plaster or masonries of cellars, walls,
foundations and shafts
• Can be painted, rolled or sprayed onto the surface
Consumption: 200 - 250 ml/m²
per layer, min. 2 layers
Remark: Can be painted, rolled
or sprayed onto the surface
Art. No.
E/Lt
E/Package
Packing/Europallet
202840001
202840002
4,20
3,60
58,80/14 lt bucket
100,80/ 28 lt bucket
ASOL-FE is used as a protection layer on concrete, plaster or masonry of cellars,
walls foundations, pits etc,. It is resistant to natural aggressive media.
Basis:Bitumen
Colour:
Brown black
Density:
1,06 - 1,10 g/cm3
Hardening:
Air curing
Priming:
Not necessary
Consumption:
200 - 250 ml/m2 and layer min. 2 layers
Substrate/application temp.:
Storage:
Free form frost 12 month
Cleaning:
Clean tools immediately after use with water or ASO-Kaltreiniger
176
BENFER
COMBIFLEX®-C2/P
Two-component bituminous thick layer waterproofing
•
•
•
•
Seamless and jointless flexible crack bridging waterproofing
Suitable for all common surfaces
Immediately rain-proof • Environmentally friendly
Simple and economical application • Bonding caused by
its own reaction of properties • Cement and chromate free
powder component • Trowel application • Application also
suitable on extremely wet or dry surfaces without priming
• General technical test certificate according to DIN 18195-2
available
•
Pot life: 45 min*
Remark: Application without
priming
Exterior waterproofing against: ground moisture, humidity,
pressure water (with suitable construction).
No.art.
E/Kg
E/Package
Packing/Europallet
205025002
4,00
100,00 /25 kg bucket
Consumption/thickness of layer
On masonry:
Ground moisture, slope water, non pressure water: 5,3 kg/m2/3,0 mm
Pressure water:
7,0 kg/m2/4,0 mm
On concrete:
Ground moisture, slope water, non pressure water: 4,5 kg/m2/2,5 mm
Pressure water:
5,3 kg/m2/3,0 mm
*The consumption of material concerning uneven surfaces has not been taken
into account
Basis:
Surface temperature:
Substrates:
Surface condition:
Pot life:
Official tests:
Storage:
Cleaning agent:
2 component, polymermodified bitumen spactling compound
Masonry, concrete, plaster
Sound, free from joints, dry or extremely wet, free from oil,
fat, grease or dust, of load carrying capacity
45 minutes
MPA (material test institute) Dresden
12 months, frost free
Clean tools with water or ASO-Kaltreiniger immediately after use
* at +20°C, 65% RH
BENFER
177
178
...waterproofs concrete in depth
AQUAFIN®-IC is a unique one-component, penetrating
waterproofing system. Based on cementitious materials,
AQUAFIN®-IC contains chemicals, that penetrate into
the concrete surface making the concrete itself part of the
waterproofing. The waterproofing properties stay intact,
even if the coating is partially removed or small cracks
develop after the application.
Due to its high resistance to hydrostatic pressure (tested
up to 130 m [200 psi] positive and negative side),
AQUAFIN®-IC is the perfect waterproofing material
for large concrete structures such as water tanks, water
catchment basins or wastewater treatment plants. Other
typical applications are in parking structures, tunnels,
elevator pits, manholes and waterproofing of below
grade foundations and walls.
Magnified AQUAFIN®-IC nanocrystals
Magnified picture
(10.000 X) of
AQUAFIN®-IC
nanocrystals.
Cement
Matrix
AQUAFIN®
Nanocrystals
Magnified 5.000 X
Treated concrete becomes watertight as crystalline
fibers fill the capillary voids.
BENFER
penetrates into the concrete...
Capillary/Crystalline Waterproofing
AQUAFIN-IC Brochure
Advantages:
• Self healing (static cracks up to 0,4 mm)
• Waterproofing properties stay intact, even
if the coating gets damaged
• Easy to apply
• Low consumption / economical
• Fast setting and hardening
• Minimal discoloration
®
AQUAFIN -IC
•Permanent
Applications:
AQUAFIN®-IC may be used on all new or
old structurally sound concrete surfaces not
subject to movement. It is also suitable for
concrete masonry or as a dry shake on fresh
concrete slabs.
Typical areas of application are:
• Potable water tanks
• Waste water treatment plants
•Tunnels
• Elevator pits
•Manholes
•Foundations
• Below grade waterproofing
BENFER
179
AQUAFIN-IC Brochure
Application:
AQUAFIN®-IC, grey or white can be
applied by brush or appropriate spray
equipment. It may also be applied as
a dry shake on fresh concrete slabs.
AQUAFIN®-IC is simply mixed
with water with a slow moving drill.
The working time is approximately
30 min. at +23°C.
Supplemental Products:
• FIX 10-S
30 sec. plug cement.
•ASOCRET®-IM
(USA: MORTAR-IC)
Crystalline sealing and repair mortar.
• ASOCRET®-RN
®
AQUAFIN -IC
(USA: MORTAR-40)
Polymer modified structural repair mortar.
180
We recommend the use of
AQUAFIN®-2K/M in combination
with our joint tapes for applications
where static and dynamic crack
bridging capabilities are required.
AQUAFIN®-1K for negative side
waterproofing of brick and CMU substrates.
BENFER
The Chemistry of AQUAFIN®-IC
The pictures below illustrate the basic behavior of
AQUAFIN®-IC on a concrete substrate:
The following photos illustrate the crack-sealing
capabilities of AQUAFIN®-IC for static
(non-moving) cracks:
Untreated concrete
is a porous system,
which is prone
to water penetration.
AQUAFIN®-IC
Application:
AQUAFIN®-IC (red)
is applied to the
concrete surface.
The active ingredients
of AQUAFIN®-IC
start to penetrate into
the capillary pores.
Inside the capillary
pores the chemicals
react with the free lime
and moisture forming
insoluble crystals.
The mechanism moves
further into the
concrete, sealing the
pores.
Result:
AQUAFIN®-IC is not only
a coating, it becomes an integral
part of the concrete!
BENFER
181
AQUAFIN®-IC
Crystalline waterproof slurry
•
•
•
•
•
•
•
•
Penetrates the capillaries in concrete
Continually active
Can be applied to damp substrates
Chloride free
Resists high levels of hydrostatic pressure
Carbonisation barrier
Waterproofs retrospective cracks up to 0,4 mm
Test certificates to DVGW worksheets W 347 and W 270 are
available
• Easy to apply by brush
• Low consumption
Pot life: 30 to 60 minutes*
Consumption: 0,75 - 1,5 kg/m2
Remark: Easy to apply, low
consumption
Art. no/Colour
E/Kg
E/Package
Packing/Europallet
204220001/Grey
2,60
65,00/ 25 kg bag
42 bags/europallet
- Exterior and interior waterproofing in cellars, lift shafts, foundations, retaining
walls.
- Waterproofing containers for drinking and service water, retaining basins, water
treatment plants, garages, tunnels etc.
- Waterproofing beneath screeds (unbonded screeds or floating screeds).
An analysis of the water is necessary where the hardness degree is ≤ 3º dH. For
the assessment of aggressiveness towards concrete to DIN 4030 the level of lime
soluble carbon dioxide is obligatory.
Basis:
Sand/cement, inorganic
Colours:Grey
Pot life:
30 to 60 minutes (at + 23°C / 60%)
From + 5°C to + 35°C. Lower temperatures extend curing times,
higher temperatures reduce it
Ready for exposure:
- To rain after approx. 24 hours*
- To foot traffic after approx. 5 hours*
- Backfilling the building trench after 3 days*
- Filling containers after approx. 7 days*
Approx. 18 N/mm² at 7 days*
Flexural strength:
6,2 N/mm² at 28 days (ASTM C 580:96)
Adhesion strength:
1 N/mm² (ASTM D 4541:2002)
Water impermeability:
> 13 bar negative or positive side
* at +23°C, 60% RH
182
BENFER
ASOCRET-IM
Repair and sealing mortar for concrete
•
•
•
•
•
•
•
Pot life: 30 min*
Remark: impermeable
Mineral-based
Water impermeable, vapour permeable
Also suitable under hydrostatic water pressure
Easy to use
Supports self-healing of concrete
For thickness from 3 to 12 mm in one coat
Can also be applied on damp substrates
Consumption:
U shaped cracks cut out to 20 x 25 mm: approx. 1,3 kg/m
Coved fillets 38 mm haunch height: approx. 1,3 kg/m
Art. no/Colour
E/Kg
E/Package
Packing/Europallet
205523001 / Grey
1,40
35,00/ 25 kg bag
42 bags/europallet
ASOCRET-IM is used for watertight
filling of opened-up cracks and
cavities that are to be covered
subsequently with AQUAFIN-IC.
Alternatively ASOCRET-IM can also
be used to form coved fillets.
Basis:
Colour:Grey
Basis:
Colour:Grey
Pot life:
Approx. 30 minutes (+ 23°C / 60% RH)
Application/surface temperature:
From + 5°C to + 30°C. Lower temperatures shorten setting time,
higher temperatures lengthen itCleaning of equipment:
Whilst still fresh
with water. Remove dried-on material with
ASO-Steinreiniger cleaner
Strength:
Approx. 35 N/mm² (28 days)
Storage:
Use opened packaging immediately
BENFER
183
ASO®-Joint-Tape-2000
Sealing tape for general requirements
• For the waterproofing of expansion and dilatation
joints in sealing layers of SANIFLEX, AQUAFIN-2K/M,
ACQUASHIELD
• For all types of surfaces in fields of construction, which are
to be tiled or for waterproofing layers which have been
skilfully prepared
E/mt
205936001/12 cm x 10 m
205936002/12 cm x 50 m
205936003/20 cm x 10 m
205936005/20 cm x 50 m
4,50
4,00
7,50
7,00
Packing/Europallet
E/Package
45,00/10
200,00/50
75,00/10
350,00/50
mt
mt
mt
mt
roll
roll
roll
roll
234
120
600
120
rolls
rolls
rolls
rolls
ASO-Joint-Tape-2000 is a new type of composite material, expandable, tensile,
stable, waterproof but allows intrusion of water vapour diffusion pores. It
guarantees the fast drying of water-containing tile adhesives and water proofing
layers. ASO-Joint-Tape- 2000 is highly resistant to aggressive substances.
ASO-Joint-Tape-2000 is a product according to the ZDB-leaflet “Instructions for the
application of waterproofing layers in composite with covering and panelling of
tiles and panels for interior and exterior
use”.
Basis:
Colour:
Thickness:
Tension:
Storage:
For designed areas with:
184
0,3 mm
> 0,5 N/mm2
BENFER
ASO®-Joint-Tape-2000-S
Special sealing tape for extended requirements
swimming pools, park decks and soiled earth areas
• Suitable materials for the application of ASO-Joint-Tape-2000-S
are AQUAFIN-2K or ASOFLEX-AKB, depending on chemical
loading
ASO-Joint-Tape-2000-S is a new type of composite material,
expandable, with a high tensile stable, waterproof but allows
intrusion of water vapour diffusion pores. It guarantees the fast
drying of water-containing tile adhesives and water proofing
layers. ASO-Joint-Tape-2000-S is highly resistant to aggressive
substances.
ASO-Joint-Tape-2000-S is a product according to the ZDBleaflet “Instructions for the application of waterproofing layers
in composite with covering and panelling of tiles and panels for
interior and exterior use”.
Remark: Highly resistant,
expandable
E/mt
E/Package
205939002/20 cm x 50 m
205939001/20 cm x 25 m
205939003/12 cm x 50 m
11,00
11,50
7,50
550,00/50 mt roll
287,50/25 mt roll
375,00/50 mt roll
Corner 90° int.
205939006/12 cm 90° int
Maximum Width 1m
E/pc
20,00
30 pcs box
Corner 90° ext.
205939005/12 cm 90° ext
Maximum Width 1m
20,00
30 pcs box
Packing/Europallet
4 pcs box/96
8 pcs box/192
8 pcs box/192
Basis:
Colour:
Thickness:
tension:
Water permeability:
Storage:
For designated areas with:
0,45 mm-0,66 mm
> 0,5 N/mm2
From 2 m to 4 m
BENFER
185
ASO®-DB Standard
Waterproof tape
•
•
•
•
•
Remark: Waterproof, elastic
Water impermeable
Elastic
UV stabilized
Resistant to weathering
Alkali resistant
E/mt
E/Package
205987001/120 mm x 50 m
3,50
175,00/50 mt roll
Packing/Europallet
ASO-DB-Standard is used for the formation of flexible, water impermeable
movement joints and connecting joints beneath tiles within e.g. SANIFLEX,
AQUAFIN-1K-flex, AQUAFIN-2K, AQUAFIN-2K/M, AQUAFIN-RS300 and
ASOFLEX-AKB waterproof membranes. ASO-DB-Standard is easy to use and
forms an intimate bond with the above named waterproof systems. ASO-DBStandard can be used in wet duty classes A0 and B0 in accordance with the ZDB
information sheet “Bonded waterproof membranes”.
ASO-DB-Standard fulfills the requirements of the test principles of the DIBt and the
information sheet “Bonded waterproof membranes” that relate to the conditions in
wet duty classes A and C.
Basis:
polyester fabric with a thermoplastic polyvinyl chloride
(PVC) elastomer coating
Colour:
grey
Thickness:
0,62 – 0,80 mm
Bursting pressure max:
approx. 4 bar
Impermeability to water in accordance with DIN EN 1928:
≥ 1,5 bar
from -22° C to +60° C
UV resistance:
minimum 500 hours according to DIN EN ISO 4892-2
Elongation, longitudinal according to DIN 527-3:
≥ 20%
Elongation, transverse according to DIN 527-3:
≥ 80%
Chemical resistance after 7 days storage at +22° C in the following chemicals:
Hydrochloric acid 3%
Sulphuric acid 35%
Citric acid 100 g/lt
Potassium hydroxide 3%
Sodium hydroxide 0,3 g/lt
Salt water 20 g/lt (sea salt)
Packaging:
50 m roll (up to a cutting point/15 m), width 120 mm
± 2 mm, centre section approx. 70 mm wide elastomer
coating, in a single box
Storage:
18 months, cool, dry, protected from sunlight and
weathering
186
BENFER
ADHESIVE JOINT SEALING TAPE
Used to seal the joints between perpendicular planes
•To prevent water infiltration in the cracks in ceramic tile and floor
covering joints
• Typically applied in swimming pools, terraces, balconies, water
tanks, showers, bathrooms, kitchens and areas that are subject to
frequent washing
The Adhesive Joint Sealing Tape is applied glued to the sub-base
with simple hand pressure before applying the waterproofing
product. The Joint Sealing Tape can be placed between the first
and second application.
Remark: Easy to apply
E/mt
E/Package
000004116/100 mm x 10 m
5,00
50,00/ 10 mt roll
Packing/Europallet
Total width:
Total thickness:
Weight:
Resistance to chemical agents:
Lateral elasticity at breakage:
Resistance to peeling:
Resistance to water pressure:
Resistance to uv rays:
Shelf life:
100 mm
0,8 mm
75 gr/m
Available on request
107 %
20 N/20 mm
1,5 bar
Resistant
From - 40°C to + 130°C
24 months in its original packaging FIBREGLASS MESH
It is used together with ACQUASHIELD+, ACQUASHIELD,
BENFERFINISH
E/mt
E/Package
000004110/1 m x 50 m
2,80
140,00/single
BENFER
Packing/Europallet
187
ASO®-Systemvlies-02
Polypropylene fleece for protection and reinforcement of bituminous
• High tensile strength
• Resistant to pollutants accumulated in soil
• Special structure of fleece guarantees a secure bond to the
waterproofing coat
ASO-Systemvlies-02 is used on the waterproofing compounds
COMBIFLEX-C2, COMBIFLEX-C2/S, COMBIFLEX-C2/P, COMBIDIC1K, COMBIFLEX-EL and AQUAFIN-DIC. It protects the waterproofing
compound against damage from moving or slipping protective and
drainage boards as well as against strong sunlight. Also as an insert
in high build polymer modified bitumen coatings.
188
E/mt
E/Package
Packing/Europallet
205021001/1 m x 100 m
2,20
220,00/1m x 100 m roll
18 rolls
BENFER
AQUAFIN®-2K-Vlies
Safety fleece
• Spun PP fleece
• Increases the crack-bridging and tear resistance of waterproofing
produced
with AQUAFIN-2K or AQUAFIN-2K/M.
Incorporated within AQUAFIN-2K or AQUAFIN-2K/M
waterproofing, primarily on:
- substrates with a high risk of cracking
- balconies, terraces and access balconies
- and placed everywhere where there is a particularly high
requirement for bridging where cracks could appear subsequently.
E/mt
E/Package
Packing/Europallet
204243002/1 m x 100 m
3,40
340,00/1m x 100 m roll
33 rolls
BENFER
189
Construction joint water stop systems
AQUAFIN®-CJ3
Bentonite waterstop
•
•
•
•
•
•
Generally approved for use in construction
No requirement for imperfect edging
Cause of defects will be reduced
Self-injecting effect by penetration into cracks and cavities
Reswellable
Extremely high, form stability, will not become sticky in summer at
high temperatures
• High anorganic contents, therefore, no material fatigue
• Coated with talcum powder
• Quick, strong and reliable swelling effect
Remark: Quick, strong and
reliable swelling effect
Art. no/Colour
E/Mt
E/Package
Packing/Europallet
207203001/Black-dark grey
12,00
240,00 / 20 mt box
(4 rolls 5 mt)
36 boxes
AQUAFIN-CJ3 is a well-developed swellable bentonite waterstop which is
economic and reliable. It is used for waterproofing construction joints which are
permanently or only temporarily subject to ground or surface water infiltration.
AQUAFIN-CJ3 will create a watertight seal in construction joints subjected to
water pressure of up to 7 bars.
Basis:
Sodium bentonite,caoutchouc, filler
Form:
The profile is rectangular and flexible
Colour:Black/dark-grey
Size:
18 x 24 mm
Swelling capacity:
> 500%
Weight:
730 g/m
Toxicity:No
Storage:
Frostfree, protected against weathering, max. of 5 years
in original unopened packs
190
BENFER
INDU-FLEX-CJ13
Hydrophilic joining strip
• Generally approved for use in construction • Swells upon in
contact with water • No requirement for imperfect edging
• Cause of defects will be reduced • Swelling process is reversible
• Extremely high, form stability, will not become sticky at high
temperatures • Non-absorbent
INDU-FLEX CJ13 is a well-developed joining strip which is very
economic and safe to use, compared to usual joint sealing methods
(PVC-joint tape, joint sheets etc.). It is used for the waterproofing of
construction joints being subject to ground, slope and surface water,
permanently or only temporarily. INDU-FLEX CJ13 features are proven
by quick, strong and secure swelling effects. The necessary construction
joints can be worked out frictionally and pressure watertight upto 3 bar.
The use in water interchange areas is possible without any problem.
Remark: Easy to use
Art. no/Colour
E/Mt
E/Package
Packing/Europallet
555111001/Red
10,00
1.750,00/ 175 m box
(7 rolls 25 mt)
36 boxes
Basis:
TPE (vulcanised elastomers)
Form:
The profile is rectangular and flexible
Colour:Red
Size:
5 x 20 mm
Swelling capacity:
> 800%
Starting of swelling:
Speed of swelling: Approx. 140% after 24 hours*
Approx. 400% after 72 hours*
Approx. 800% after 14 days*
Toxicity:No
Storage:
Frostfree, protected against weathering, max. of 2 years
in original unopened packs
* at +20°C, 65% RH
BENFER
191
INDUBOND-TAPE-3000
Thermoplastic joint tape for waterproofing joints
• Highly flexible • Simple, homogenous weld
• No activation necessary
• Impermeable to water even against negative pressure
• Can be applied to matt damp substrates without priming
• Resistant to frost, UV and ageing
Areas of application: INDUBOND-Tape-3000 is used in
combination with INDUBOND-VK4031 for waterproofing
day/ construction joints and movement joints as well as for
waterproofing cracks and voids in concrete construction. It is
additionally suitable for waterproofing transitions, penetrations
or differing building materials.
Remark: Impermeable to water
even against negative pressure
Art. no/Colour
555114001/Grey
555114002/Grey
555114003/Grey
555114004/Grey
555114005/Grey
555114011/Grey
555114012/Grey
555114013/Grey
555114014/Grey
555114015/Grey
Packing
20 m
20 m
20 m
20 m
20 m
20 m
20 m
20 m
20 m
20 m
Width/Lenght/Strength
15 cm x 20 m x 1 mm
20 cm x 20 m x 1 mm
25 cm x 20 m x 1 mm
30 cm x 20 m x 1 mm
50 cm x 20 m x 1 mm
15 cm x 20 m x 2 mm
20 cm x 20 m x 2 mm
25 cm x 20 m x 2 mm
30 cm x 20 m x 2 mm
50 cm x 20 m x 2 mm
E/PC
12,00
15,00
18,00
22,00
36,00
18,00
22,00
28,00
36,00
54,00
Units/Europallet
60 Units/europallet
48 Units/europallet
36 Units/europallet
36 Units/europallet
24 Units/europallet
60 Units/europallet
48 Units/europallet
36 Units/europallet
36 Units/europallet
24 Units/europallet
Movement joints:
Movement joints always require a 2 mm joint tape and can either be laid flush
or in a loop dependent on the project. To accomodate movement, leave an
unbonded section of tape in the expansion area. Dependent on the installation
and loading e.g. overhead use or negative water pressure, a reinforcing or
supporting construction may be necessary.
Material thickness1,0 mm2,0 mm
Weight per unit area, g/m2approx. 900
approx. 1800
Tensile strength at break, to DIN EN ISO 527-3, N/mm²
approx. 14,0
approx. 14,0
Elongation at break, to DIN EN ISO 527-3, %
approx. 1000
approx. 1000
Tear propogation strength, to DIN 12310-2, N :
approx. 100
approx. 200
Consumption INDUBOND-VK4031 :
Consumption in kg/m
Dimension/Epaisseur
1,00 mm
2,0 mm
150 mmapprox. 0,8approx. 1,4
Does not consider extra material consumption for uneven substrates.
Basis:
Colour :
Shore A hardness to ISO 868 :
Application, substrate and material temperature:
192
TPE (Elastomère thermoplastique)
Grey
approx. 87
- 30° C to + 90° C
+ 5° C à +35° C
BENFER
INDUBOND-VK4031
Two-component epoxy resin-based, thixotropic, multipurpose adhesive
INDUBOND-VK4031 is a two-component, solvent- free, 100%
solids, high-modulus, non-sag, multipurpose bonding agent for
horizontal, vertical and overhead applications. When mixed
INDUBOND-VK4031 will give a smooth, paste-like consistency
used for structural and waterproof bonding of a wide range of
construction substrates.
Pot life: 90 min at 23° C
Light traffic/full load after:
48 hrs/ 7 days at 23° C
Remark: for structural and
waterproof bonding
Primary Uses:
INDUBOND-VK4031 is a multipurpose, structural adhesive
typically used for:
• Structural bonding of pre-cast elements such as segmental
bridge units, crash barriers, parapets, curbs etc. • Fixing dowels
and starter bars • Blow hole filling • Levelling undulated surfaces
• Filling and sealing of static cracks • Fixing surface injection
packers • Bonding carbon fibre wrap to concrete surfaces
• Adhesive for INDUBOND-Tape-3000
Art. no/Colour
E/Kg
E/Package
Packing/Europallet
555053002/Grey
9,60
57,60/6 kg bucket (A + B)
4 kg Comp. A
2 kg Comp. B
Cleaning & Equipment Maintenance: During continued application, all tools must be regularly & thoroughly cleaned with
water and/or solvent every 25 to 40 minutes (dependant on temperature) to prevent the product from setting on tool surfaces.
Thorough cleaning must also be carried out immediately at the end of works or whenever work is suspended. Cured material
can only be removed mechanically.
Storage & shelf life: Both components (A and B) have a shelf life of 24 month when original, unopened containers are
stored in a dry environment above +10° C. In case INDUBOND-VK4031 is exposed to temperatures below +10° C,
Component A of INDUBOND-VK4031 may stiffen. This is reversible by storing the product for 72 hours at a temperature of
+25 to max. +30° C prior to use.
Basis:
Colour:
Density:
Mixing ratio:
Pot life:
Adhesive open time:
Overcoat after:
Full cure:
Light traffic/full load after:
Flexural strength:
2-components epoxy-resin
Component A: off white Component B: transparent Mixed product: light grey
approx. 1,80 g/cm3 at +23° C
2:1 parts by weight
90 mins at 23° C
120 mins at 23° C
5° C
16 hrs at 23°C
7 days
48 hrs/7 days at 23° C
concrete failure (above 18 N/mm2)
30 N/mm2
60 N/mm2
BENFER
193
AQUAFIN®-P1
Injection resin for the waterproofing of water-bearing cracks
• For the injection of water-bearing cracks and joints in
concrete and stone
• Stoppage of water inflows from cracks, joints, etc
• Compacting of granular stones
• Meets the requirements of the DfBT-leaflet “Bewertung der
Auswirkungen von Bauprodukten auf Beton und Grundwasser
(evaluation of the effect of construction products on concrete
and ground water)” dated November 2000
• Ready to use without mixing
Consumption: 1.15 g/lt
Art. no/Colour
E/kg
E/Package
Packing/Europallet
205090002/Brown
28,00
154,00/ 5,5 kg can
100 cans/europallet
AQUAFIN-P1 is a highly reactive, one component modified isocyanates ready to
use without mixing.
AQUAFIN-P1 foams with water contact by high increase in volume and becomes
a firm viscoelastic foam, which seals temporarily against further water penetration.
AQUAFIN-P1 is resistant against acids and alkalis and attacks neither bitumen nor
joint tapes. In case of very dry surfaces the material does not foam immediately
but it hardens slowly due to the steady addition of existing air resp. soil moisture.
Basis: Waterreactive 1-comp. polyurethane resin (with integrated catalyst)
Colour:Brown
Viscosity at +5°C:
approx. 2900 ± 300 mPa·s
Viscosity at +10°C:
Densty:
approx.1,150 ± 40 g/cm3 at + 25° C
Minimum reaction temperature:
> 5° C
Recommended processing temperature: from 15° to 30°C.
194
BENFER
AQUAFIN®-P4
Elastic polyurethane injection resin
Pot life: 25 min*
Consumption: 1.00 g/lt
Remark: Elastic
• Two component elastic PU-injection resin
• For the close, waterproofing and elastic connection of cracks,
joints and cavities in construction made of concrete, natural
stone or bricks
• Suitable for the waterproofing of car parks, concrete tanks,
inner shells, construction joints
• For the waterproofing injection using injection hoses,
AQUAFIN-CJ1 an AQUAFIN-CJ2 in concreting joints
• Perfectly suited for the injection with the two-component-pump
• Can be injected via packers or embedded injection hoses
AQUAFIN-CJ1 and AQUAFIN-CJ2
• Fulfills the requirements of the KTW recommendations (plastic
and potable water)
•
No.art.
E/Kg
E/Package
Packing/Europallet
205091005
26,00
273,00/10,5 kg can (A + B)
5 kg Comp. A
5,5 kg Comp. B
100 cans/europallet
AQUAFIN-P4 is a solvent-free thin liquid, two-component polyurethane resin.
AQUAFIN-P4 is slow-reacting and hardens to a non-foaming, non-rigid, pore-free
material which slightly foams when put into contact with water.
AQUAFIN-P4 bonds to a dry, moist surface and offers an excellent adhesion and
tear resistance. AQUAFIN-P4 has a low glass transition temperature and resists to
winter temperatures without causing embrittlement and widening of cracks due to
low temperatures without tearing.
Basis:
Mixing ratio:
Pot life: Application temperature:
Gelling time/hardening time: Shore-A-Hardness:
Tensile strength (acc. to DIN 53455):
Elongation (acc. to DIN 53455):
Cleaning:
Polyurethane resin
1:1 parts by volume
At + 8°C: 50 - 60 minutes
At + 15°C: 40 - 50 minutes
At + 23°C: 25 - 35 minutes
At + 8°C: 17,5 ± 2 h
At + 15°C: 15 ± 1,5 h
At + 23°C: 13 ± 1 h
60 - 70
Approx. 3 MPa
110 - 150%.
Clean tools properly immediately after use and thoroughly with the cleaning
agent ASO-R006
BENFER
195
AQUAFIN®-i380
Silane based injection cream for sequentially applied horizontal damp-proof barriers
Remark: ready to use,
pressureless injection
• Ready to use • solvent free • Hydrophobic
• Highly penetrative
• Prevents capillary water transportation
• Very high active ingredient content
• Simple and effective application
• Low consumption • Pressureless injection
• Free from labelling
• WTA approved system – up to 95 % moisture saturation
For producing retrospectively applied horizontal barriers in
accordance with the WTA work sheet “Injections in masonry
against capillary moisture”, against rising damp up to 95 %
moisture saturation in masonry work constructed from e.g. brick,
clinker, lime-sand blocks, natural stone including joints. Injection
is carried out using a hand applied spray gun without pressure
(< 10 bar).
Art. no/Colour
//Lt
E/Package
Packing/Pallet
204610002/White
204610003/White
64,00
44,00/600 ml Cartridge
320,00/5 lt bucket
12 Cartridges
70 Units
Borehole diameter: 12 mm
Borehole depth = Masonry wall thickness – 2 cm
Borehole spacing 12.5 cm
Wall
thickness
Borehole depth Filling quantity
per borehole
11,5
24,0
36,0
42,0
approx. 9,5 cm
approx.22,0 cm
approx.34,0 cm
approx.40,0 cm
cm
cm
cm
cm
approx.
approx.
approx.
approx.
11
25
38
45
ml
ml
ml
ml
Consumption
per running
metre
approx. 88 ml approx. 7,0 m
approx.200 ml approx. 3,0 m
approx.304 ml approx. 2,0 m
approx.360 ml approx.1,7 m
Basis: silan
Consistency:creamy
Colour:
white, transparent after drying
Specific gravity:
approx. 0,9 g/cm3
Active ingredient content:
approx. 80 % by weight
Substrate / application temperatur:
+5 °C to +30 °C
Storage:
frost-free, 9 months in the original unopened container.
196
BENFER
spreading
rate per
600 ml
Removal of render from damaged areas
Marking out the bore hole spacing
Drilling the holes
Removing dust & debris from after drilling
Injecting the cream-consistency AQUAFIN®-i380
BENFER
197
AQUAFIN®-F
Silification solution for construction waterproofing
•
•
•
•
•
•
•
•
Ready to use
Hydrophobic
Pore restricting
Vapour permeable
Against capillary rising damp
Over 40 years practical experience
Solvent free
Tested to the WTA (Association for Science and Technology of
Building Maintenance and Monuments Preservation) data sheet
4-4-04/D to 95% moisture saturation
Consumption: Min. 15 kg/m²
(e.g. 36 cm thick wall = min.
5,5 kg/m)
Art. no/Colour
E/Kg
E/Package
Packing/Europallet
204247001/Clear
5,00
60,00/12 kg can
60 cans/europallet
For the production of retrospective horizontal moisture barriers in accordance with
the WTA data sheet 4-4-04/D with capillary rising damp in walls. The capillary
porosity of the construction material (blockwork/concrete) is interrupted by the
combination of active agents (capillary restriction/hydrophobicity).
Basis:
Alkali silicate-siliconate
Colour:Clear
Specific gravity:
1,3 g/cm3
pH value:
12,2
Cleaning:
Storage:
Frost free, 24 months in the original unopened container
Use opened containers promptly
198
BENFER
BENFER
199
Restoration systems for moist walls
ESCO-FLUAT
Impregnating solution for the transformation of building damaging salts
• Transforms water soluble salts (chlorides and sulphates) into
insoluble
• Avoids the invasion of lightly soluble salts into the wet, not yet
hydrophobic restoration plaster
Consumption: For two treatments
approx. 0,4 - 0,5 kg/m²
Remark: Concentrate
Art. no/Colour
E/Kg
E/Package
Packing/Europallet
204146001/Clear
204146002/Clear
5,60
5,40
56,00 /10 kg can
135,00 /25 kg can
60 cans/europallet
24 cans/europallet
ESCO-FLUAT is applied as flanking measure during the restoring of salt containing
masonry. Essentially a salt treatment is performed as far-reaching measure, if
subsequently THERMOPAL restoration plaster is being applied. The salt treatment
avoids the invasion of lightly soluble salts into the wet, not yet hydrophobic
restoration plaster by back wandering of the preparation water during the drying
period.
Basis:
Storage:
Danger notes:
Safety advices:
200
Aqueous hexafluorosilicate solution
Frost resistant up to - 5°C, 24 months
Hazardous if swallowed
Avoid contact with eyes and skin
BENFER
THERMOPAL®-GP11
Air-entraining ground plaster according to WTA-Leaflet 2-2-91
• Interior or exterior leveling plaster
•For uneven surfaces with excess moisture or salt contained in
natural-stone or brick-stone masonry
THERMOPAL-GP11 is a cement-lime based, ground and levelling
plaster suitable for the restoration of wet and saline masonry on
interior and exterior applications, containing THERMOPAL-SR44,
THERMOPAL-SR44-white or THERMOPAL-SR24. It prevents the
intrusion of water soluble salts in the masonry and in the green
restoration plaster.
Pot life: 60 min
Consumption: 8 kg/m2per cm
thickness of layer
Remark: Can be applied
mechanically or by hand
Measures taken dependent
on the degree of salting in
accordance with WTA
Art. no/Colour
E/Kg
E/Package
Packing/Europallet
201414003/Grey
1,50
30,00 / 20 kg bag
42 bags/europallet
Degree of salting1)
low
medium to high
1)
Measures taken
Thickness (cm)
Notes
1. Splatterdash coat
2. THERMOPAL-SR44/-SR24
≤ 0.5
≥ 2.0
As a rule the splattedash dash
coat does not completely cover
≤ 0.5
1–2
1– 2
Total thickness:
Min. 2.5 cm, max. 4 cm
roughen up previous coat
as necessary
2. THERMOPAL-GP11
≤ 0.5
≥ 1.0
≥ 1.5
Drying time of individual
coats 1mm/day
To be determined and calculated by preliminary testing.
Basis:
Cement-lime-based mortar
Class of mortar:
PII
Colour:Grey
Water requirement:
36% = 9 lt per bag
Cleaning of tools:
In wet condition with water.
Hardened materials may only be removed mechanically
Tests:
In accordance with WTALeaflet 2-2-91
Storage:
In dry storage for approx. 6 months in original closed bags,
use opened bags promptly
BENFER
201
THERMOPAL®-SP
Mineral-based restoration splatterdash mortar
• Pre-blended dry mortar
• Conforms to requirements in accordance with WTA data sheet
2-9-04D
• Hydraulic cure
• Very good bond to mineral-based substrates
• Very good bond for following plaster/render coats
•
Pot life: 1 hour
Consumption: 1,5 kg/m2/mm
thickness (net-like, half cover)
Remark: Conforms to
requirements in accordance with
WTA data sheet 2-9-04D
Art. no/Colour
E/Kg
E/Package
Packing/Europallet
201419001/Grey
1,30
32,50/ 25 kg bag
42 bags/europallet
Areas of application: As a preparation to substrates for plastering/rendering
(bonding coat) prior to applying the plaster/render such as e.g. THERMOPALGP11, THERMOPAL-SR24, THERMOPAL-SR44, THERMOPAL-SR44-white and
THERMOPAL-ASP45 on to load-bearing mineral-based substrates.
Basis:
Pre-blended mortar
Colour:Grey
Water demand:
Approx. 5.5 - 6 litres/ 25 kg bag
Pot life:
Approx. 2 hrs at +23° C and 65% RH
Consumption: Approx. 3.0 kg/m2/mm as a bonding coat (full contact)
Approx. 1.5 kg/m2/mm (net-like, half cover)
Packaging:
25 kg bags
+5° C to +30° C
Storage:
Dry, 12 months in the original unopened packaging.
202
BENFER
THERMOPAL®-SR24
Mineral-based restoration render - WTA
•
•
•
•
•
•
•
•
Pot life: 60 min
Consumption: 9,5 kg/m²/cm
thickness
Mineral-based pre-blended mortar
High volume of entrained air
Vapour permeable
High salt storage capacity
Low consumption per surface area
Ready for rubbing down at an early stage
Hand or mechanical application
For producing vapour permeable and dry renders on to damp and/
or salt containing walls in interior and exterior installations.
THERMOPAL-SR24 can be applied at thicknesses, including a
single coat, up to a maximum of 3 cm in one operation. Apply
more coats for thicker renders.
Measures taken dependent
on the degree of salting in
accordance with WTA
Art. no/Colour
E/Kg
E/Package
Packing/Europallet
201411001 Grey
1,20
30,00/ 25 kg bag
42 bags/europallet
1)
Degree of salting
low
medium to high
1)
Measures taken
Thickness (cm)
Notes
2. THERMOPAL-SR24
≤ 0.5
≥ 2.0
2. THERMOPAL-SR24
3. THERMOPAL-SR24
≤ 0.5
–
1– 2
1 2
2. THERMOPAL-GP11
3. THERMOPAL-SR24
≤ 0.5
≥ 1.0
≥ 1.5
Total thickness:
as necessary
coats 1mm/day
Basis:
Pre-blended dry mortar
Colour:Grey
Water demand:
Approx. 6 - 6,5 litres per bag
Bulk density:
1 - 1,1 kg/dm3
Storage:
Dry, 12 months in the original unopened packaging
BENFER
203
THERMOPAL®-SR44
Mineralic restoration plaster
•
•
•
•
•
•
•
•
•
Pot life: 60 min
Consumption:
7,5 kg/m2/ thickness
Restoration plaster tested by WTA
Dry, premixed restoration plaster
High air-entraining volume
Permeability to vapour diffusion
High salt storage
Manual or mechanical handling
Easy and economical application
Low consumption
THERMOPAL-SR44 is suitable for the interior or exterior plastering of
salt containing and/or wet walls.
Art. no/Colour
E/Kg
E/Package
Packing/Europallet
201418002/White
201416005/Grey
1,60
1,50
32,00/ 20 kg bag
30,00/ 20 kg bag
42 bags/europallet
42 bags/europallet
Measures taken dependent on the degree of salting in accordance with WTA
Degree of
salting 1)
Measures taken
low
2. THERMOPAL-SR44
medium to high
2. THERMOPAL-SR44
3. THERMOPAL-SR44
2. THERMOPAL-GP11
3. THERMOPAL-SR44
1)
Thickness (cm)
Notes
≤ 0,5
≥ 2,0
≤ 0,5
1–2
1–2
Total thickness:
as necessary
≤ 0,5
≥ 1,0
≥ 1,5
coats 1 mm/day
Basis:
Water demand:
Storage:
Official test:
204
At works premixed dry mortar
7 - 7,5 l per bag
In dry storage for 12 months, in original closed bags
Test certificate “Gütegemeinschaft Kalkstein, Kalk und Mörtel e.V., Köln”
BENFER
THERMOPAL®-FS33
Fine finishing mortar for THERMOPAL® restoration plasters
•
•
•
•
•
Mineral-based fine finishing mortar
Vapour permeable
Low stress cure
For thicknesses from 1 to 3 mm
Pot life: 60 min*
thickness
Remark: Vapour permeable
Art. no/Colour
E/Kg
E/Package
Packing/Europallet
201422001/Cream white
1,40
35,00/ 25 kg bag
42 bags/europallet
THERMOPAL-FS33 is used for producing a fine surface finish.
It is suitable onto coarser structured mineral- based plasters
and as a fine smoothing mortar (mortar group PII b) for interior
and exterior use. It is used to achieve smooth surfaces with
the restoration plasters THERMOPAL-SR44 and THERMOPALSR24.
Colour:
Basis:
Application/ substrate temp:
Pot life:
Water demand:
Bulk density (fresh mortar):
Consumption:
Flexural and compressive strengths:
Coefficient of water absorption:
Storage:
cream white
cement/lime, aggregates
+5 °C to +30 °C
approx. 60 minutes*
approx. 6,5 – 7,0 lt/25 kg
approx. 1,8 kg/lt
approx. 1.4 kg/m2/mm thickness
approx. 1.0 / 4.0 N/mm2 after 28 days*
0,11 kg/(m2 x h 0,5)
dry, 12 months, in the original unopened packaging.
Use opened packaging promtly.
BENFER
205
NIENTEMUFFA
Macro-porous dehumidifying two-coat plaster for new walls and repairs
• Creation of plaster free of saline efflorescence
• Resistant to deposited seeping soluble salts, ensures elevated
and lasting protection from rainfall
• For interiors and exteriors
• Old and new structures
• Depth of up to three centimeters per coat
• Maximum application thickness 3 cm per coat
• Does not need primer
•
Pot life: 50 - 60 min
Consumption: 13-14 kg/m2/cm
thickness
Remark: Does not need primer
Art. no/Colour
E/Kg
E/Package
Packing/Pallet
000009530/ Grey
0,70
17,50/ 25 kg bag
60 bags/pallet
Macro-porous dehumidifying two-coat plaster for new walls and repairs.
A powder product composed of highly resistant cements, selected aggregates
and special components that guarantee the formation of macro-pores in its
interior. It was designed to have an elevated permeability to steam united with
very limited absorption of water to drastically reduce the humidity present in
walls. It is the most indicated product for easily creating plaster with two-coat
working destined to last over time with its superior aesthetic characteristics and
functioning.
It is free of saline efflorescence and extremely resistant to freezing temperatures.
Consistency:Powder
Color:Grey
Conservation:
Duration: 12 months
Danger of harm:
No. Possible irritation of the eyes and skin for contact due to the cement content
Inflammability:No
Mixture contents:
16-18 parts water with 100 parts powder by weight
Liquid mixture:
4 - 4,5 liters of water for one bag of powder
Mixture pot life:
50/60 minutes*
* at +20°C, 65% RH
206
BENFER
BENFER
207
Impregnators
ASOLIN-WS
Siloxane Impregnation
Consumption:
approx.100-1000 ml/m2,
depending on the substrate
• Solvent-containing construction chemical based on oligomere
siloxanes • For a colourless and water repellent impregnation
of mineralic construction materials • Ready for use
•Applied onto the construction material and absorbed by
capillarity • It is transformed into the water repellent siloxane
under the influence of moisture • Water repellant characteristics
of surfaces treated with ASOLIN-WS are resulting in significant
protection against damages caused by frost and salts
•Important remarks concerning efficiency and durability:
- Low molecular weight - high penetration depth
- Large alkyl groups - therefore suitable for highly alkaline
construction chemicals
- Dry tack-free - no subject to dirtiness
- Applicable on slightly moist surfaces
- Quick formation of a water-repellent effect - therefore fast
pelting rain proof
- Improvement of frost resistance and corrosion caused by salts
Art. no/Colour
E/Lt
E/Package
Packing/Europallet
12,00
11,70
11,40
60,00/5 lt bucket
117,00/10 lt bucket
285,00/25 lt bucket
140 buckets box
Consumption:
Between 100 -1000 ml/m2
Concrete:
250 - 500 ml/m2
Plaster:
500 - 800 ml/m2
Porous concrete:
500 - 1000 ml/m2
ASOLIN-WS is recommended for moisture protection of facades or strongly
inclined areas.
Test on objects before use.
General remarks concerning impregnation of different construction materials
with ASOLIN-WS:
- Excellent:
Porous concrete, bricks, lime sand stone, mineralic plaster,
mineralic paint
- Good:
Concrete, cement bonded artificial stone, asbestos cement
- Different:
Natural stone
- Limited suitability:Plastic resin plaster
- Not suitable:
Gypsum, plastic resin paints
The ready for use ASOLIN-WS is applied onto the construction material by means of spraying and brushing.
Basis:
Specific Gravity:
Cleaning:
Storage: 208
Oligomere siloxane with arge alykl groups
Approx. 0,78 g/ml
Clean tools immediately after use with AQUAFIN-Cleanser
12 months in closed packs
BENFER
Impregnators
BENFERDROP
Hydrophobic treatment for cement and lime-based products, brick and natural stone
•
•
•
•
•
•
Perfect on rough and exposed plaster
Waterproofing of cement joints
Easy to use
Effective and lasting protection
Prevents the formation of white salts
Ecological
Consumption: 0,05 - 0,5 lt/m²
depending on absorbtion
Remark: Effective and lasting
protection
Art. No.
E/Kg
E/Package
Packing/Pallet
000001485
000001490
10,20
12,00
51,00 / 5 kg can
12,00 /1 kg pot
100 cans/pallet
12 pots box
Hydrophobic treatment for cement and lime-based products, brick and natural
stone.
Eco-friendly and practically odourless white liquid consisting of siloxanes in a
solvent-free aqueous solution.
On drying, Benferdrop becomes completely transparent and invisible, leaving the
original appearance and colour of treated surfaces unaffected.
The product’s superior water repellent properties protect substrates from troublesome
infiltrations of water that can result in blooming and permanent damp, or cause
parts of the substrate itself to break off or crumble due to frost.
Benferdrop will not produce unsightly white efflorescence on treated surfaces.
Appearance:
White latex
Conservation:
12 months in the original packaging, intact
Danger of harm:
No
Inflammability:No
Specif weight: 1,0 kg/dm3
pH:
Approx. 8
Coverage:
From 0,05 to 0,5 lt/m2 depending on absorption
Final hardening:
3 days
BENFER
209
Adhesive grouts for anchor of foundations and concrete elements
INDUCRET®-VK30
Highly fluid mineral-based grout
Pot life: 30 min*
Consumption: 2 kg/dm3
• Cement-based
• Chloride free
• Pumpable
• Easy to use at low temperatures
• Highly fluid
• Insensitive to cracking
• Resistant to frost and thawing salts
• Water impermeable
• Resistant to oil and petrol
• Low chromate conforming to TRGS 613
• INDUCRET-VK30 guarantees a strong adhesive bond to concrete
and asphalt subfloors
Remark: Highly fluid
Art. no/Colour
E/Kg
E/Package
Packing/Europallet
550001002/Grey
1,40
35,00 / 25 kg bag
42 bags/europallet
INDUCRET-VK30 is used as an adhesive grout for depths from 5 to 30 mm
e.g. for the void free grouting of: kerbstones, pre-cast concrete elements, steel
and concrete supports, machine foundations, generators/compressors and other
machinery exposed to high levels of vibration, crane rails.
Furthermore for the void free grouting of recesses and joints in concrete, steel
inserts and channels in concrete, anchor bolts.
INDUCRET-VK30 is a component of the INDUCRET-VK-Element system.
Particle size:
Wet density of fresh mortar:
Water demand:
Pot life:
Slump:
Expansion rate:
Shrinkage rate:
Compressive strength (DIN 1164):
Flexural strength:
Cleaning:
Storage:
210
0 - 1,0 mm
2,27 kg/dm3*
approx. 13%
approx. 30 minutes*
after 5 minutes* ≥ 550 mm
after 24 hours* ≥ +3,1% of volume
- 1,2 mm/m after 28 days*
40,0 N/mm2 after 24 hours*
76,0 N/mm2 after 28 days*
Thoroughly clean tools with water after use
9 months when stored dry and free from frost above +10°C in
the original closed packaging. Use opened packaging promptly
* at +20°C, 65% RH.
BENFER
Adhesive grouts for anchor of foundations and concrete elements
INDUCRET®-VK100
Highly fluid mineral-based grout
Pot life: 60 min*
Consumption: 2 kg/dm3
Remark: Highly fluid
•
•
•
•
•
•
•
•
•
•
•
Cement-based
Chloride free
Pumpable
Easy to use at low temperatures
Highly fluid
Insensitive to cracking
Resistant to frost and thawing salts
Water impermeable
Resistant to oil and petrol
Low chromate conforming to TRGS 613
INDUCRET-VK100 guarantees a strong adhesive bond to
concrete and asphalt subfloors
Art. no/Colour
E/Kg
E/Package
Packing/Europallet
550008001/Grey
1,40
35,00/ 25 kg bag
42 bags/europallet
INDUCRET-VK100 is used as an adhesive grout for depths from 20 to 100 mm
e.g. for the void free grouting of: kerbstones (e.g. for Dresdner Combiborde),
pre-cast concrete elements, steel and concrete supports, machine foundations,
generators/compressors and other machinery exposed to high levels of vibration,
crane rails.
Furthermore for the void free grouting of recesses and joints in concrete, steel
inserts and channels in concrete, anchor bolts.
Certification: Nr.: 220003784-04 MPA NRW Dortmund.
Particle size:
Wet density of fresh mortar:
Consumption:
Water demand:
Pot life:
Slump:
Expansion rate:
Shrinkage rate:
Compressive strength (DIN 1164):
Flexural strength:
Cleaning:
Storage:
0 - 5,0 mm
2,31 kg/dm3*
2,00 kg/dm3*
14 %
approx. 60 minutes*
after 24 hours* ≥ +3,2% of volume
Thoroughly clean tools with water after use
9 months when stored dry and free from frost above + 10°C
in the original closed packaging
* at +20°C, 65% RH.
BENFER
211
212
BENFER
INDUFLOOR®-IB systems –
the ideal solution for trade, commerce and industry
Seamless epoxy resin systems
BENFER
213
System based
priming and levelling
Epoxy resin systems are not only used in industrial areas,
but also in commercial areas, whose requirements are
not noticeably different from industry. Dependent on the
type and severity of the exposure, different products are
chosen, but also based on a system build-up.
INDUFLOOR®-IB systems, dependent on product, are:
•Highly impact-resistant
• Easy to clean
• Slip-resistant
• Lightfast
• Economic
• Decorative
• Even
• Resistant to liquids specific to cars
• Resistant to plasticizers
• Resistant to mechanical and chemical loads
214
INDUFLOOR®-IB-Standard
Workshops
INDUFLOOR®-IB-ColourQuarz
Supermarkets, Department stores
INDUFLOOR®-IB-Seal-Thix
Vehicular access routes in logistics warehouses
INDUFLOOR®-IB-Seal AntiRubber
Car dealerships
INDUFLOOR®-IB-UV-Seal
Hotel lobbies
INDUFLOOR®-IB-Deluxe
Manufacturing industry
BENFER
The basis of the six
INDUFLOOR®-IB
The basis for the six coating systems shown here is
INDUFLOOR®-IB1275.
This primer and levelling compound guarantees you –
perfectly matched to the system – optimum application
of all system components.
INDUFLOOR®-IB1275 is used as a primer and levelling
compound on dry to matt-damp concrete substrates.
• Self levelling
• Very good ability to de-aerate
• Pre-filled (with quartz powder)
• Pigmented
• Bonds to dry surfaces
The advantages
• No cumbersome production of a scratch coat
• High surface yield
• Savings on work tools
• Application is gentle on the back and knees
• No broadcasting with aggregate necessary
• Waiting time before the next coat max. 5 days
• Low transport volume
• Low consumption of the finished coating
• Effective surface protection
• Area put back into service quickly
BENFER
215
INDUFLOOR®-IBStandard 150-300
Areas of application
System properties
Packaging
• Workshops
• Warehouses
• Medium impact resistance
• Medium abrasion
• Resistant to liquids specific to cars
INDUFLOOR®-IB1275
• 28,5 kg units
INDUFLOOR®-IB3357
• 15 kg units
• 30 kg units
Load-bearing
INDUFLOOR®-IBStandard 150
Thickness
1,50 mm
2,00 mm
3,00 mm
Finished coating/
consumption
INDUFLOOR -IB3357
approx. 2,00 kg/m2
INDUFLOOR -IB3357
approx. 2,00 kg/m2
INDUFLOOR®-IB3357
approx. 2,00 kg/m2
Priming and levelling mortar/
consumption
INDUFLOOR®-IB1275
approx. 0,20 kg/m2
INDUFLOOR®-IB1275
approx. 0,60 kg/m2
INDUFLOOR®-IB1275
approx. 2,20 kg/m2
®
®
Pointed tooth rake
Finished coating
l
Primer
l
l
l
l
42,00
67,00
Paint roller (8 mm nap)
Finished coating
Primer
*Approximate cost of
system €/m²
l
36,00
*Calculated on the basis of the price list of the package larger, without considering the scrap
216
BENFER
INDUFLOOR®-IBColourQuarz
System properties
Packaging
• Exhibition halls
• Department stores
• Supermarkets
• Garages
INDUFLOOR®-IB-ColorQuartz
• Decorative
INDUFLOOR®-IB1275
• 28,5 kg units
INDUFLOOR®-IB-ColorQuartz anti-slip
• High impact resistance
• Decorative
• Slip-resistant
Load-bearing
INDUFLOOR®-IBColourQuarz
INDUFLOOR®-IBColourQuarz anti-slip
Clear lacquer finish/
consumption
INDUFLOOR®-IB2010
approx. 1,20 kg/m2
INDUFLOOR®-IB2010
approx. 0,25 kg/m2
Colour quartz application/
consumption
INDU®-DecorQuarz
approx. 1,30 kg/m2
INDUFLOOR®-DecorQuarz
approx. 1,30 kg/m2
Priming and levelling
mortar/ consumption
INDUFLOOR®-IB1275
approx. 0,30 kg/m2
INDUFLOOR®-IB1275
approx. 0,30 kg/m2
INDU®-DecorQuarz
• 25 kg bag
Large rubber squeegee (white)
Clear lacquer finish
l
Colour quartz application
Primer
Clear lacquer finish
l
l
l
l
38,00
15,00
Colour quartz application
Primer
*Approximate cost
of system €/m²
* Calculated on the basis of the price list of the package larger, without considering
the scrap
BENFER
217
INDUFLOOR®-IBSeal-Thix 150-200
System properties
Packaging
• Vehicular access routes in logistics
warehouses
• Slip resistant (easy to clean)
• Medium abrasion
INDUFLOOR®-IB1275
• 28,5 kg units
INDUFLOOR®-IB3390
• 15 kg units
• 30 kg units
Load-bearing
INDUFLOOR®-IBSeal-Thix 150
INDUFLOOR®-IBSeal-Thix 200
Thickness
1,50 mm
2,00 mm
Finished coating/
consumption
INDUFLOOR®-IB3390
approx. 0,85 kg/m2
INDUFLOOR®-IB3390
approx. 0,85 kg/m2
mortar/ consumption
INDUFLOOR®-IB1275
approx. 1,50 kg/m2
INDUFLOOR®-IB1275
approx. 3,00 kg/m2
Pointed tooth rake
Finished coating
Primer
l
l
Finished coating
l
l
Primer
Foam structured roller
Finished coating
l
l
39,00
62,00
Primer
*Approximate cost
of system €/m²
218
BENFER
Recommendation
With both variants, it is
recommended to use
INDUFLOOR®-IB1275
pigmented.

INDUFLOOR®-IBSeal-AntiRubber 150-200
System properties
Packaging
• Car dealerships
• Garages
• Hair salons
• Lightfast
• Resistant to plasticizers (car tires)
• Medium abrasion
INDUFLOOR®-IB1275
• 28,5 kg units
Load-bearing
INDUFLOOR®-IB2257
• 3 kg units
• 10 kg units
Abrasive stress reduces the
durability.
INDUFLOOR®-IBSeal-AntiRubber 150
INDUFLOOR®-IBSeal-AntiRubber 200
Thickness
1,50 mm
2,00 mm
Matt satin finish/
consumption
INDUFLOOR®-IB2256
approx. 0,05 kg/m2
INDUFLOOR®-IB2256
approx. 0,05 kg/m2
Pigmented
intermediate layer/
consumption
INDUFLOOR®-IB2257
approx. 0,15 kg/m2 RAL 7032
INDUFLOOR®-IB2257
approx. 0,15 kg/m2 RAL 7032
mortar/ consumption
INDUFLOOR®-IB1275
approx. 2,20 kg/m2
INDUFLOOR®-IB1275
approx. 3,00 kg/m2
Pointed tooth rake
INDUFLOOR®-IB2256
• 2,61 kg units
Matt satin finish
Intermediate layer
Primer
l
l
Matt satin finish
l
l
Intermediate layer
l
l
52,00
64,00
Primer
*Approximate cost
of system €/m²
the scrap
BENFER
219
INDUFLOOR®-IBUV-Seal 150-200
System properties
Packaging
• Hotel lobbies
• Exhibition halls (visitor area)
• Lightfast
• Matt satin
• Medium abrasion
INDUFLOOR®-IB1275
• 28,5 kg units
Load-bearing
INDUFLOOR®-IBUV-Seal 150
INDUFLOOR®-IBUV-Seal 200
Thickness
1,50 mm
2,00 mm
Pigmented,
matt satin finish/
consumption
INDUFLOOR®-IB2257
approx. 0,15 kg/m2
INDUFLOOR®-IB2257
approx. 0,15 kg/m2
mortar/ consumption
INDUFLOOR®-IB1275
approx. 2,20 kg/m2
INDUFLOOR®-IB1275
approx. 3,00 kg/m2
Pointed tooth rake
Pigmented,
matt satin finish
Primer
l
l
Pigmented,
matt satin finish
l
l
43,00
55,00
Primer
*Approximate cost
of system €/m²
the scrap
220
BENFER
INDUFLOOR®-IB2257
• 3 kg units
• 10 kg units
INDUFLOOR®-IBDeluxe 150-300
System properties
Packaging
• Production areas
(manufacturing industry)
• High impact resistance
• Minimum abrasion
• Open to traffic after 3 days
INDUFLOOR®-IB1275
• 28,5 kg units
INDUFLOOR®-IB3358
• 15 kg units
• 30 kg units
Load-bearing
INDUFLOOR®-IBDeluxe 150
Thickness
1,50 mm
2,00 mm
3,00 mm
Finished coating/
consumption
INDUFLOOR®-IB3358
approx. 1,70 kg/m2
INDUFLOOR®-IB3358
approx. 1,70 kg/m2
INDUFLOOR®-IB3358
approx. 1,70 kg/m2
mortar/ consumption
INDUFLOOR®-IB1275
approx. 0,60 kg/m2
INDUFLOOR®-IB1275
approx. 1,50 kg/m2
INDUFLOOR®-IB1275
approx. 3,00 kg/m2
Pointed tooth rake
Finished coating
l
l
l
Primer
l
l
l
57,00
81,00
Finished coating
Primer
*Approximate cost of
system €/m²
43,00
BENFER
221
Standard Colours
Coatings/Sealers
approx. RAL 1001
approx. RAL 1015
approx. RAL 3009
approx. RAL 5014
approx. RAL 6011
approx. RAL 7016
approx. RAL 7023
approx. RAL 7030
approx. RAL 7032
approx. RAL 7035
approx. RAL 7037
approx. RAL 7038
approx. RAL 7040
approx. RAL 7042
approx. RAL 9002
Due to printing processes, the colour chart is a guide,
as it is possible that there may be colour variations compared with the original colour.
222
BENFER
BENFER
223
INDUFLOOR®-IB1275
Priming and levelling mortar
INDUFLOOR-IB1275 is a two component, solvent free epoxy resin
primer:
• Pre-filled
• Very good ability to de-aerate
• Good substrate wetting capacity
• Self levelling when used as a levelling mortar
• Thicknesses from 0 - 2 mm
Pot life:
approx. 60 min. at +10 ° C
Remark: two component,
solvent free epoxy resin primer
As a primer or levelling mortar on cement-based areas such as
concrete and screed beneath the following INDUFLOOR coatings:
• INDUFLOOR-IB-3357
Art. no/Colour
E/Kg
E/Package
Packing/Europallet
555063003/RAL 7032
Colour page 222
15,60
444,60/ 28,5 kg Kit (A + B)
25 kg bucket Comp. A
3,5 kg bucket Comp. B
12 Units/europallet
12 Units/europallet
Basis: Viscosity: Density:
Mixing ratio: Pot life : Application temperature: Substrate temperature :
Foot traffic after:
Overcoat after: Tensile adhesion strength :
Flexural strength: Compressive strength:
Cleaning: Packaging: Storage: 224
2 component epoxy resin
approx. 2000 - 2500 mPa.s à + 20 ° C
approx. 1,50 g /cm3 à + 23 ° C
approx. 60 min. at + 10 ° C
min. + 10 ° C, max. + 30 ° C
> 8 ° C and 3 ° K above dew point
min. 12 hrs at +23° C
approx. 12 hrs, max. 24 hrs at +23° C
Concrete failure (B1.5)
53,5 N / mm2
71,5 N / mm2
Clean work tools thoroughly after use with INDU-IB-Cleanser
28.5 kg container Component A and B are supplied at a
pre-determined mix ratio
12 months when stored dry and free from frost in the original unopened
containers above +10° C
BENFER
INDUFLOOR®-IB2010
Clear lacquer
INDUFLOOR-IB2010 is a two component epoxy resin with the
following properties:
• Solvent free
• Transparent
• Conforms to VOC guidelines
• Medium viscosity
• Withstands mechanical loading
• Watertight
• Resistant to dilute alkalis, acids, aqueous salt solutions,
lubricants
• Resistant to plasticizers (car tyres)
• Low yellowing
Consumption:
Approx. 350 - 700 g/m²
(dependent on the degree of
anti-slip required)
Remark: Transparent
Art. no/Colour
E/Kg
E/Package
Packing/Europallet
29,00
26,00
87,00/ 3 kg bucket
87 Units/europallet
42 Units/europallet
INDUFLOOR IB-2010 is used:
• as a pore tight finish coat seal on top of anti-slip
surfaces that are impervious to liquids and have additionally been broadcast
with ColorSand; in display areas, showrooms, stairwells, corridors, access
balconies, commercial kitchens, production areas, etc.
Basis:
two component epoxy resin
Colour:transparent
Mixing ratio:
Density:
approx. 1.08 g/cm³
Pot life:
approx. 40 min. at + 23°C
from + 10°C to + 30°C
Foot traffic after:
min. approx. 12 hrs at +23° C
Overcoat after:
approx. 12 hrs up to a max. 24 hrs at +23° C
Min. cure temperature:
+ 10°C
BENFER
225
INDUFLOOR®-IB2256
Satin-matt, plasticizer resistant 2 component polyurethane sealant
Consumption: Env. 50-80 g/m²
Foot traffic after: Approx.12 h
Remark: Sightfast and UV stable
•
•
•
•
•
•
•
•
•
•
•
Transparent
Aqueous
Dries satin-matt
Solvent free
Lightfast and UV stable
Resistant to conventional cleaning agents
Resistant to liquids specific to motor cars
Resistant to car tyres
VOC free
High protection against wear
Can be produced as an anti-slip finish
Art. no/Colour
E/Kg
E/Package
Packing/Europallet
180,00
469,80/2,61 kg bucket
Method of application / consumption:
Smooth: After waiting for 10 minutes, pour INDUFLOOR-IB2256 in sections over the floor and spread with a short nap lamb’s
wool roller. Begin on the side where the most light is falling and work away from the light so that the area can be watched
during work and if areas are missed they can be immediately touched up.
Only spread INDUFLOOR-IB2256 in maximum 1 m wide strips with a roller across where the light falls (parallel to the window)
followed by a final even back-roll in the direction of light incidence. Always work wet in wet but avoid forming puddles.
Consumption: approx. 50 – 80 g/m² per coat.
INDUFLOOR-IB2256 is used as additional surface protection for INDUFLOOR-IB2350, INDUFLOOR-IB3358, INDUFLOORIB3386 and INDUFLOOR-IB3357 product systems, which can also be broadcast with INDU-ColorChips if desired.
•Garages and showrooms for motor cars
•Sales areas (e.g. boutiques, corridors, foyers)
•Hairdressing salons
Basis:
2 component polyurethane resin
Colour:Transparent
Mixing ratio:
4:1 parts by weight
Density:
Approx. 1.03 g/cm3 at +23ºC
Viscosity:
Low viscosity
Pot life:
Approx. 1 hr at +18 - 25ºC
Application and substrate temperature:
18 - 25ºC
Taber abrasion resistance Abraser:
40 – 45 mg
Foot traffic after:
Approx. 12 hrs at +18 - 25ºC / 40 - 65% relative humidity
Exposure to chemicals:
After approx. 7 days at +18 - 25ºC / 40 - 60% relative humidity
Cleaning:
Thoroughly clean tools with water immediately after use.
Storage:
6 months when stored dry and free from frost in the original
unopened containers above +10ºC.
226
BENFER
INDUFLOOR®-IB2257
Matt satin, pigmented 2 component polyurethane-acrylate sealer
INDUFLOOR-IB2257 is:
• Pigmented
• Aqueous
• Dries matt satin
• Solvent free
• Lightfast and UV stable
• Resistant to mineral acids (20% max) and their salts, inorganic
alkalis and their salts
• Voc free
• Can be produced as an anti-slip finish
Consumption:
Approx.150 - 200 g/m²
INDUFLOOR-IB2257 is used as a surface protection on epoxy
and PU coatings in light duty areas.
Remark: Lightfast and UV stable
Art. no/Colour
E/Kg
E/Package
Packing/Europallet
555154001/RAL 7032
555154002/RAL 7032
Colour page 222
26,00
24,00
78,00/ 3 kg bucket
84 Units/europallet
42 Units/europallet
Application method/consumption:
Smooth: INDUFLOOR- IB2257 INDUFLOOR-IB2257 is applied in 1–2 coats (with
orange and yellow colours, 2 coats are recommended). Pour the mixed materials in
portions over the surface and spread with a solvent resistant twin-bladed squeegee,
then thoroughly and evenly apply with a short nap paint roller or wide brush. Keep
areas of overlap to a minimum. Consumption: approx. 150–200 g/m2.
Anti-slip: Apply INDUFLOOR-IB2257 in one coat. Mix INDU-Anti-Slide
homogenously into the pre-mixed INDUFLOOR-IB2257 and then spread over the
surface with a solvent resistant rubber squeegee followed by a thorough and even
application using a short nap paint roller or large brush. Keep overlap areas to a
few as possible. Consumption: approx. 150–200 g/m2 plus 12–16 g/m2.
Basis: Colour :
Mixing ratio: Density:
Viscosity: Pot life : Application/Substrate temperature:
Foot traffic after:
Exposure to chemicals:
Cleaning: Packaging:
Storage: Substrate preparation:
2 component polyurethane-acrylate resin
RAL 7032
approx. 100: 10 parts by weight
approx. 1,35 g /cm³ at + 23° C
low viscosity
approx. 30 min. at + 23° C
min. + 8° C / max. + 30° C
approx. 5 hours at + 23° C, <75% relative humidity
after approx. 7 days at +23°C, < 75% relative humidity
Thoroughly clean tools with water immediately after use.
3 and 10 kg containers. Components A and B (in separate containers) are
supplied at a pre-determined mix ratio.
6 months when stored dry and free from frost in the original unopened
containers above +10° C.
The epoxy and PU coating to be sealed should not be older than 24 hours
BENFER
227
INDUFLOOR®-IB3357
Universal industrial floor coating
Foot traffic after: approx. 12 h
Consumption: approx. 1,3 1,5 kg/m2
Remark: High resistance to
mechanical loads and chemical
exposure
INDUFLOOR-IB3357 is a two component epoxy resin with the
following properties:
• Pigmented • Very good de-aerating properties
• Variable applications
• High resistance to mechanical loads and chemical exposure
• High compressive and flexural strengths
• Surface structure can be produced from smooth through highly
anti-slip
• Resistant to conventional cleaning agents at application
concentrations
• Resistant to weathering
• Economical
• Loading ramps, Vehicular access ways etc
Art. no/Colour
E/Kg
E/Package
Packing/Europallet
555062001/RAL 7032,
555062002/RAL 7032
Colour page 222
18,00
16,50
270,00/15 kg bucket
495,00/30 kg bucket
42 Units/europallet
1 x 24.2 kg/bucket
1 x 5.8 kg/bucket
12 Units/europallet
70 Units/europallet
INDUFLOOR-IB3357 is used as a heavy duty industrial coating onto cement-based surfaces such as concrete and screed
• Production areas and warehousing
• Floor finishes in commercial premises, workshops, laundries
• Loading ramps, Vehicular access ways etc
• As a base coat for producing decorative finishes with INDU-DekoChips
Basis: Standard colours:
Viscosity: Density: Mixing ratio:
Pot life:
Minimum cure temp:
Foot traffic after: Overcoat: Fully cured: Compressive strength:
Flexural strength: Cleaning:
Storage:
228
2 component epoxy resin
approx. RAL 7032
approx. 1200 mPas ± 15 % at + 20° C
approx. 1,41 g/cm3 at + 23° C
100 : 24 parts by weight
+ 8° C
approx. 12h at + 23° C
approx. 12h/max. 24h at + 23° C
approx. 7 days at + 23° C
approx. 70 N/mm2
approx. 44 N/mm2
Thoroughly clean work tools with INDU-IB Cleanser immediately after use.
24 months when stored dry and cool in the original unopened packaging
above +10° C.
BENFER
INDUFLOOR®-IB3358
Universal very heavy duty industrial and commercial floor coating
Foot traffic after: approx.12 h
Consumption: 1,4 - 3,2 kg/m2
Remark: Accepts vehicular traffic
soon after installation
INDUFLOOR-IB3358 is:
• Pigmented • Self-levelling
• Accepts vehicular traffic soon after installation
• Very good de-aerating performance • Viscoplastic
• High resistance to mechanical loads • Resistant to plasticizers
(car tyres) • High abrasion resistance • Low grinding
• Highly resistant to chemicals • Economical
• Can be filled with 0.2 – 0.6 mm INDU-Quartz sand
Areas of application: INDUFLOOR-IB3358 is used as heavy duty
surface protection on cement-based areas in the manufacturing
industry, which need to be protected against mechanical (heavy
wear) and chemical damage.
• Production areas and warehousing • Logistics centres
• Workshops • Loading ramps • Vehicular access area
• Garages and parking areas • As a priming layer for producing
decorative surfaces using INDU-DekoChips
Art. no/Colour
E/Kg
E/Package
Packing/Europallet
555142001/RAL 7032
555142002/RAL 7032
Colour page 222
21,00
20,00
315,00/15 kg bucket
600,00/30 kg bucket
42 Units/europallet
25 kg bucket
5 kg bucket
12 Units/europallet
70 Units/europallet
Application of the finish coat/Consumption: Evenly apply one coat of INDUFLOOR-IB3358 to the desired thickness with a toothed
rake or pin leveller and where necessary remove air bubbles using a suitable spiked roller evenly and slowly through the coating.
Pure binder:
Thickness: 1.0 mm = consumption: approx. 1,400 g/m2
Filled with 0.2 – 0.6 mm INDU-Quartz sand (1:0.5 by weight):
Basis: two component epoxy resin
Viscosity:
approx. 1960 mPas ± 15 % at + 20° C
Density: approx. 1,40 g/cm3 at + 23° C
Mixing ratio:
Pot life:
Minimum +8°C, 80 % HR, Maximum: +35°C, 80 % HR
> 8°C
Foot traffic after: approx. 12 h at + 23° C
Overcoat: approx. 12 h/max. 20 h at+ 23° C
Fully cured: after 7 days at + 23° C
Compressive strength: approx. 79 N/mm2
Shore D hardness after 3 days: approx.. 60 – 65 at +23°C
Shore D hardness after 7 days: approx.. 73 – 75 at +23°C
Storage:
12 months when stored dry and cool above +10° C in the original unopened container.
BENFER
229
INDUFLOOR®-IB3390
Textured coating
Foot traffic after: approx.12
hours at + 23°C
Remark: Antislip
Structured coating
Sand broadcast, grade
0,2 - 0,7 mm
INDUFLOOR-IB3390 is a pigmented, thixotropic two component
textured epoxy resin with the following properties:
• Studded surface structure • Slip resistant • Resistant to medium
duty mechanical loads and chemical exposure • Resistant to
many acids and alkalis as well as conventional cleaning agents
at application concentrations
• Resistant to weathering, tends to discolour under UV light
INDUFLOOR-IB3390 is used
• in interior and exterior areas as a mechanically resistant industrial
floor coating on cementitious surfaces such as concrete and
screed
• in production areas and warehouses - predominantly in the
car industry • on floors in commercial kitchens, workshops,
laundries loading ramps, roadways etc.
• as a priming coat for the production of decorative surfaces
using INDU-ColorChips
Art. no/Colour
E/Kg
E/Package
Packing/Europallet
555021001/RAL 7032
555021101/RAL 7032
Colour page 222
19,00
18,00
285,00/15 kg bucket
540,00/30 kg bucket
42 Units/europallet
25,9 kg
4,1 kg
12 Units/europallet
70 Units/europallet
Method of application/consumption:
INDUFLOOR-IB3390 is applied by roller. Prior to the application of
INDUFLOOR-IB3390 prepare the substrate as above and
• prime with INDUFLOOR-IB1270 • broadcast intermediately with quartz
sand of grain size 0.2 - 0.7 mm diameter • where there are large areas
of unevenness, apply a smoothing coat dependent on the depth of
the irregularity (see valid Technical Data Sheet for INDUFLOOR-IB1270
universal primer).
Textured coating:
After application of the primer, lay INDUFLOOR-IB3390 with a rubber
rake (moltoprene roller, rough structure) and roll through using a crisscross technique with a textured roller.
Consumption: min. 800 g/m2.
Basis:
Mixing ratio:
Pot life:
Min cure temperature:
Foot traffic after:
Overcoat after:
Fully cured:
Cleaning:
Storage:
230
two component epoxy resin
approx. 45 min. at + 10°C, approx. 35 min. at + 20°C,
approx. 15 min. at + 30°C
+ 10°C
approx. 12 h at + 23°C
approx. 12 h / max. 24 h at + 23°C
after approx. 7 days at +23° C
B 1,5 (concrete)
Thoroughly clean tools immediately after use with INDU-IB Cleanser.
18 months when stored dry and cool above +10° C in the original
unopened packaging.
BENFER
INDU-DecorQuartz
Coloured sand
INDU-DecorQuartz is a coloured sand with the following properties:
• Coloured
• Special particle size distribution
• Coated in epoxy resin
• Exhibits only minor yellowing.
Method of application/consumption:
Tip the prepared coloured finish mix on to the prepared substrate
and spread evenly in a minimum thickness of 2 mm above the
particulates with a surface rake or trowel. Consumption: approx.
3.0 kg/m2.
Blind the fresh coating with INDU-DecorQuartz.
Consumption of broadcast material: approx. 2.5 – 3.5 kg/m2.
Prior to the application of the floor sealer thoroughly remove all
excess non-bound broadcast material. Dependent on the required
slip performance abrade the surface area prior to sealing.
For further advice refer to the technical data sheet for INDUFLOORIB3380 decorative coating.
Art. no/Colour
E/Kg
555120001/Light Grey -Grey - Black
555120002/Blu - Violet - Black
555120003/Light Blu - Blu - Violet
555120001/Light Beige - Ochre - Brown
2,80
2,80
2,80
3,10
Packing/Europallet
E/Package
70,00/
70,00/
70,00/
77,50/
25
25
25
25
kg
kg
kg
kg
bag
bag
bag
bag
40
40
40
40
Bags/europallet
Bags/europallet
Bags/europallet
Bags/europallet
INDU-DecorQuartz is used for mixing with or for broadcasting into decorative coloured finishes to produce closed and slip
resistant surfaces in commercial kitchens, production areas, showrooms, sales areas, stairwells, corridors, access balconies
etc. INDU-DecorQuartz is supplied in sizes 0.4 – 0.7 mm diameter.
Colourways:M01 Light Grey -Grey - Black
M06 Blu - Violet - Black
M07 Light Blu - Blu - Violet
M08 Light Beige - Ochre - Brown
Particle size:
0,4 - 0,8 mm diameter
Density:
Approx. 2,2 g/cm3
Storage:
BENFER
231
BETOCRETE C-16 - BETOCRETE C-17 (BV)
Concrete waterproofing
232
BETOCRETE Brochure
Liquid Crystalline
Waterproofing Admixtures
for concrete structures
BENFER
Cristalline Waterproofing Admixtures
BETOCRETE Brochure
…permanent waterproofing of concrete from within
BETOCRETE C-16
BETOCRETE C-17 (BV)
BETOCRETE C-16 is the world’s first liquid crystalline waterproofing
concrete admixture. BETOCRETE C-17 (BV) is our latest
development, based on the same technology, it also provides the
added advantage of plasticising/water reduction properties.
BETOCRETE C-17 (BV) complies with EN 934-2.
The innovative active ingredient in BETOCRETE C-16 and C-17 (BV)
reacts with moisture and free lime, creating millions of nanocrystals
throughout the concrete matrix. This reaction continues any time the
chemicals come into contact with water. The BETOCRETE C-16 or
C-17 (BV) treated concrete achieves the capability to self heal
shrinkage cracks.
Unlike powder admixtures, BETOCRETE C-16 and C-17 (BV)
completely eliminate the risk of lumping, and ensure homogeneous
distribution of the waterproofing admixture throughout the concrete
structure. They both can be added to concrete during the batching
process at the concrete plant or on the construction site to the
ready-mix truck, equipped with suitable mixing capabilities.
BETOCRETE C-16 and C-17 (BV) form a permanent and integral
part of the concrete which is extremely resistant to high hydrostatic
pressures. BETOCRETE C-16 and C-17 (BV) will permanently block
the flow of water in the concrete, thus reducing chloride ion diffusion
and hence protecting reinforcement steel. However this does not effect
the absorptive properties in the top few millimetres of the concrete
surface. BETOCRETE C-16 and C-17 (BV) concretes exhibit
improved freeze-thaw resistance due to the pore blocking properties.
Whilst BETOCRETE C-16 will not affect compressive strength,
BETOCRETE C-17 (BV) will increase compressive strengths by up
to 25% compared to a control mix.
BETOCRETE C-16 and C-17 (BV) substantially reduce the amount
of time and labour associated with applying traditional waterproof
coatings, making a perfect waterproofing solution for large concrete
structures. Typical applications include water tanks, water catchment
basins, wastewater treatment facilities, parking structures, tunnels, dams
and waterproofing of foundation walls and slabs.
BENFER
233
234
BETOCRETE Brochure
Typical Applications:
BETOCRETE C-16 and C-17 (BV)
are simply added to any concrete
mix requiring waterproofing properties.
They have negligible air entraining
effects and are compatible with
most concrete plasticisers. Pre-testing
is required.
We recommend the use of
BETOCRETE C-16 or C-17 (BV)
in a wide variety of new concrete
projects.
Typical areas of application include:
• Precast structures
• Foundations
• Concrete slabs
• Dams
• Parking structures
• Water tanks & wastewater
treatment facilities
• Shotcrete
• Mass concrete
BENFER
BETOCRETE Brochure
Method of application:
BETOCRETE C-16 and C-17 (BV) are added directly to the concrete, either
during the batching process or on site in a ready-mix truck, equipped with suitable
mixing capabilities.
BETOCRETE C-16 and C-17 (BV) are added at a rate of 2 - 3 % by weight
of cement based on the water/cement ratio, which should not exceed 0.55.
Concrete should be placed within 45 minutes of admixture addition.
BETOCRETE C-16 and C-17 (BV) significantly reduce labour and time costs
associated with the application of standard waterproof coatings. Application is as
easy as adding any concrete admixture, allowing it to mix for 3 - 5 minutes, and
then placing the concrete.
This is a very cost effective and simple solution for waterproofing new concrete
structures.
BENFER
235
236
BETOCRETE Brochure
Advantages:
• Easy to use
• Extremely cost effective
• Significantly reduces labour and time costs
• Self healing of static cracks up to 1/64” - 0,4 mm
• Increases concrete strength and freeze/thaw resistance
• No lumps during batching
• Protects reinforcement from corrosion due to reduced chloride ion diffusion
• Negligible air entrainment
• Compatible with most plasticizers and water reducers
• Forms a permanent and integral part of the concrete matrix
• Additional waterproof coatings generally not needed
• Environmentally safe; Zero VOCs
• Treated concrete withstands high hydrostatic pressures
• BETOCRETE C-16 is permeability tested to Army Corps of Engineers CRD-C 48-92
up to 200 psi (14 bar) = 460 ft (140 m) head pressure.
Result: drastic reduction of permeability compared to untreated concrete
• BETOCRETE C-17 (BV) complies with DIN EN 934-2
BENFER
BETOCRETE Brochure
The Chemistry of BETOCRETE C-16 and C-17 (BV)
The innovative chemistry of BETOCRETE C-16 and C-17 (BV) reacts with moisture and free lime to form millions
of crystalline fibers (nanocrystals) within the capillary pores. These fibers reduce the pore diameter, permanently
blocking the flow of water through capillaries and voids (up to 0,4 mm), yet allowing the concrete to breathe.
The pictures below illustrate the basic behavior of
BETOCRETE C-16 within the concrete.
The following photos illustrate
the crack-sealing capabilities of
BETOCRETE C-16 and C-17 (BV).
Cement
Matrix
Capillary Void
Magnified 5.000 X
Without BETOCRETE C-16. Untreated concrete is a
porous system, prone to water infiltration.
Example of a naturally
occurring shrinkage crack in
red pigmented concrete.
(Magnified approx. 32 X)
Cement
Matrix
BETOCRETE C-16
Nanocrystals
Magnified 5.000 X
Treated concrete becomes
watertight as crystalline
fibers fill the capillary
voids.
Magnified picture (10,000 X) of
BETOCRETE C-16 nanocrystals
Shrinkage typically produces
static hairline cracks. With static
cracks up to 1/64" - 0,4 mm,
BETOCRETE C-16 and C-17 (BV)
will produce nanocrystals in the
crack, sealing it and preventing
further flow of water.
Result: BETOCRETE C-16 or C-17 (BV) become
an integral and permanent part of the concrete matrix.
BENFER
237
BETOCRETE-C16
Crystalline waterproofing concrete admixture
Primary Uses:
BETOCRETE C-16 is a crystalline technology concrete admixture
used to produce permanently active waterproof concrete in:
• Water retaining structures; potable water tanks, sewage
treatment plants, septic tanks
• Water excluding structures; retaining walls, tunnels, elevator
pits, dams
• Below grade structures; piles foundations, basements
• Mass concrete
Consumption: 2 - 3% by weight
of cement
Remark: crystalline technology
concrete admixture
Art. no/Colour
E/Kg
E/Package
Packing/Europallet
4,60
3,80
3,50
115,00 /25 kg canister
950,00 /250 kg drum
3.850,00/1100 kg container
24 units/europallet
2 units/europallet
1 unit/europallet
Advantages:
•
•
•
•
•
•
•
•
Permanently active; will self heal future static cracks up to 400 microns.
Improved final strength.
Provides additional protection to reinforcement steel by reducing chloride ion diffusion.
Can be used in high w/c ratio (up to 0.55) concretes.
Liquid; no lumping, easily dispersed.
Withstands high water pressures (up to 14 bars).
Compatible with most types of concrete admixtures.
Eliminates need for surface waterproofing.
238
BENFER
Primary properties:
Colour: clear* colourless
Form: liquid
Density (+20° C.): 1.15 g/cm3
pH-value: 11.5
Processing temp.: + 8° C to +30° C
* Insignificant slight cloudiness does not impact the performance
Dosage Range:
w/c ratio < 0.45: w/c ratio > 0.45:
2% by weight of CEM 3% by weight of CEM
Dosage in ready-mix factory:
BETOCRETE-C16 can be dosed together with the gauging water or to the ready mix as the last component.
Dosage in truck mixer on the job site:
2-3 m % of BETOCRETE-C16 is dosed into the mixer drum and then thoroughly mixed for 3-5 minutes. Pour without delay.
Instructions for Use:
When stored for extended times, stir BETOCRETE-C16 well before use.
Control of the concrete mix design regarding w/c ratio < 0.55 prior to dosing BETOCRETE-C16.
Workability time is approx. 45 minutes after the addition of BETOCRETE-C16.
The addition of a concrete retarder is necessaary when using Portland Cement Type II or III. Suitability tests have to be
carried out before usage.
When using BETOCRETE-C16 at temperatures below +10° C, the product shall be blended with water in the ratio 1:1
prior to usage.
If the material was stored at temperatures below +8° C crystals may form. The product is suitable for usage again after
stirring or homogenizing.
Suitability tests accord. to valid standards and norms have to be carried out prior to application.
Special Advice:
•
•
•
•
•
•
•
Concrete modified with BETOCRETE-C16 may tend to effloresce depending on the composition.
Aggregates must have a continous sieve-line.
It is recommended to perform compatability tests with other admixtures as required.
Concrete, modified with BETOCRETE-C16 must be produced, placed and finished accord. to valid norms.
BETOCRETE-C16 is non corrosive and has no adverse effects on the re-inforcement.
Protect surrounding areas against the influence of BETOCRETE-C16.
It is rarely possible that BETOCRETE-C16 influences the setting of the concrete.
Our product RUXOLITH-T5 (VZ) has proven as the most effective retarder.
Safety & Health:
Please adhere to valid European Materials Safety Data Sheet (MSDS)!
This technical data sheet is a translation from German and does not consider local building codes or legal requirements. It
shall be used as general reference for the product. Legally binding is only the German technical data sheet or the latest Data
sheet from one of our foreign subsidiaries inside their sales territory.
BENFER
239
BETOCRETE-C17 (BV)
Concrete plasticizer with crystalline waterproofing function
Areas of Application:
BETOCRETE-C17 (BV) is especially suitable for water
impermeable concrete in structures such as e.g. tunnels,
foundations, embankments, parking garages, reservoirs, water
works and water treatment plants, below ground car parks,
swimming pools, pipework below ground, mass concrete etc.
Consumption: 2 - 3% by weight
of cement, at least 7 kg/m3
of concrete
Remark: crystalline
waterproofing function
Art. no.
E/Kg
E/Package
Packing/Europallet
404217001
404217004
404217003
4,70
4,00
3,80
117,50/25 kg canister
1.000,00/250 kg drums
24 units/europallet
2 units/europallet
1 unit/europallet
Advantages:
•
•
•
•
•
•
•
•
•
•
Permanently active; will self heal future static cracks up to 400 microns
Improved final strength
Provides additional protection to reinforcement steel by reducing chloride ion diffusion
Can be used in high water/cement ratio (up to 0.55) concretes
Liquid; no lumping, easily dispersed
Withstands high water pressures (up to 14 bars)
Compatible with most types of concrete admixtures
Eliminates need for surface waterproofing
Complies with EN 934-2
Self-healing of later occuring static cracks up to 0,4 mm is possible
240
BENFER
Primary Properties:
Colour:
Form:
Density (+ 20°C):
pH-value:
Processing temp.:
Storage:
Shelf-life:
Compliance:
clear blue
liquid
1,16 g/cm3
11
From + 8° C to + 30° C
Protect from frost and contamination. Do not store below +8°C.
12 months in the original unopened container.
Complies with EN 934–2:part 2; 2001
Dosage Range:
2.0 to 3.0 % by weight of cement; at least 7 kg per m3 of concrete.
The required dosage depends on the concrete formula and the reactivity of the cement (see product preparation).
It is to be determined by suitability tests.
Dosage in ready-mix factory:
BETOCRETE-C17 (BV) can be dosed together with the gauging water or to the ready mix as the last component.
Dosage in truck mixer on the job site:
Place all the BETOCRETE-C17 (BV) into the mixer drum and then thoroughly mix for 1 minute per m3 of drum contents, but
for at least 5 minutes running continuously.
In order to guarantee the full function of BETOCRETE-C17 (BV) and to obtain the greatest possible closed concrete matrix,
observe the following parameters:
The w/c value of the concrete mix should not exceed 0.55 including the concrete additive. Utilize a consistent particle
size distribution with the largest grain size being 16 mm.
The minimum cement content is for:
CEM I 320 kg/m3
CEM II 350 kg/m3
CEM III 380 kg/m3
Special Advice:
• Concrete modified with BETOCRETE-C17 (BV) can, dependent on composition, show a tendency to effloresce.
• Before using BETOCRETE-C17 (BV) carry out a trial.
• When using CEM II and CEM III grades the permanent function of BETOCRETE-C17 (BV) can be constrained. This is
also true of latent hydraulic or pozzolanic concrete additives.
• If additional concrete additives are to be used, then appropriate trials are to be carried out.
• Concrete with BETOCRETE-C17 (BV) must be produced, installed and post-treated in compliance with current valid
standards.
• BETOCRETE-C17 (BV) does not contain materials which cause corrosion.
• In rare cases BETOCRETE-C17 (BV) can influence the setting process of the concrete. System compatible products
REMITARD 20 (BV) and RUXOLITH T5 (VZ) are available to control the concrete.
Health & Safety:
Please observe a valid EU health & safety data sheet.
BENFER
241
BETOCRETE C-21 (DM)
Crystalline waterproofing admixture of the 3rd generation
Consumption: by weight of
cement, at least 7 kg /m3 of
concrete
Remark: crystalline
waterproofing agent
Fields of Application: BETOCRETE C-21 is a third generation
crystalline waterproofing agent.
BETOCRETE C-21 is suited for structural pre-cast units, as well as
those constructions produced on site as for example
• water retaining structures; potable water tanks, sewage
treatment plants, septic tanks
• water excluding structures; retaining walls, tunnels, elevator
pits, dams
• below grade structures; piles foundations, basements
• mass concrete.
In this context the use of BETOCRETE C-21 is explicitly suited
to all types of concrete units in contact with the ground, those
surrounded or flooded by water.
Art. no/Colour
E/Kg
E/Package
Packing/Europallet
406171004/White
406171005/White
406171002/White
5,50
5,00
4,50
137,50 /25 kg canister
1.100,00 /220 kg drum
4.680,00 /1040 kg container
24 units/europallet
2 units/europallet
1 unit/europallet
Properties and mode of action:
BETOCRETE C-21 is an inorganic liquid additive for waterproofing / increasing the water impermeability of concrete units.
BETOCRETE C-21 is fluid and therefore does not tend to cause clumping during the mixing process. The dosage is carried
out as with every conventional concrete additive using suitable dosing equipment. BETOCRETE C-21 initially has a chemical
effect and reduces the water absorption of the hardened cement paste. As needed the latent crystalline effect available,
already known from the products BETOCRETE-C16 and BETOCRETE-C17 (BV), is implemented (e.g. with existing waterbearing cracks). The active mechanisms of the concrete additive are permanently available and the products formed during
reactions are non-reversible. The affinity for crystal formation permits the healing of static cracks.
• Liquid, therefore considerably easier and safer to mix – no risk of clumping • Withstands extremely high levels of
hydrostatic pressure; from the positive (active) or negative side • Closure of retrospectively formed cracks up to 0.4 mm is
possible • Becomes an integral and permanent component of the concrete • The concrete remains vapour permeable
• Max. water-cement factor: 0.55 • Permanently active • Unused product does not crystallise out at temperatures below
+8° C • Meets the requirements for a waterproofiung agent acc. EN934-2 Table 9 • Immediate hydrophobic effect
• Reduced tendency for discoloration • Water absorption reduced against control
242
BENFER
Technical Data:
Colour:
white
Form:
liquid
Density:
1.05 g/cm3 ( 20°C)
pH-value:
approx. 11.5
Processing temp.: + 8°C to + 30 °C
Storage:
Frost free. Protect from contamination. If the product is completely frozen, slowly thaw out and homogenise.
Shelf-life:
12 months in the original unopened container.
Dosage Range:
2.0 to 3.0 % by weight of cement; at least 7 kg per m3 of concrete.
BETOCRETE-C21 is added together with the gauging water or to the ready mix as the last component. A sufficient final
batching time must be safe-guarded in each case.
Dosage in ready-mix factory: BETOCRETE-C21 can be dosed together with the gauging water or to the ready mix.
Dosage in truck mixer: The entire amount of of BETOCRETE-C21 (2-3 %) is dosed into the mixer drum and then thoroughly
mixed for at least 3-5 minutes. The water-cement ratio shall not exceed 0.55. The addition of a concrete retarder may be
necessaary when using Portland Cement Type II or III. Suitability tests have to be carried out before usage.
Special Advice:
• Concrete modified with BETOCRETE C-21 can, dependent on composition, show a tendency to effloresce.
• Before using BETOCRETE C-21 carry out a trial
• When using CEM II and CEM III grades the permanent function of BETOCRETE C-21 can be constrained. This is also
true of latent hydraulic or pozzolanic concrete additives.
• Aggregates must be composed of a steadily rising particle size distribution.
• If additional concrete additives are to be used, then appropriate trials are to be carried out.
• The crack width restrictions specified by the planner/ engineer/structural engineer must be adhered to in all
circumstances. Other interpretations are to be proven by appropriate verification and qualification.
• Concrete with BETOCRETE C-21 must be produced, installed and post-treated in compliance with current valid
standards.
• BETOCRETE C-21 does not contain materials which cause corrosion.
• In rare cases BETOCRETE C-21 can influence the setting process of the concrete. System compatible products
REMITARD 20 (BV) and RUXOLITH T5 (VZ) are available to control the concrete.
Quality inspection:
• As a waterproof material for concrete to EN 934-2:T9
Health & Safety:
Please observe a valid EU health & safety data sheet.
BENFER
243
Screeds, mortars and plaster admixtures
ASOPLAST-MZ
Bonding emulsion - additive for screeds and mortars - protection for green concrete
Properties:
• Solvent free
• Free from acetates and diluents
• Free from chloride ions
• No corrosion causing components
• Plasticizing
• Concentrate
Consumption: depends on
application
Remark: for mortar and screed
Art. no/Colour
E/Kg
E/Package
Packing/Europallet
202222001/White
202222006/White
202222002/White
202222003/White
9,60
8,20
8,00
7,80
9,60/1 kg bottle
41,00/5 kg canister
1 kg/bottle x 6/box
140 units/europallet
60 units/europallet
24 units/europallet
ASOPLAST-MZ is used for producing polymer modified mortars, bonding coats, splatterdash coats, tough renders, enhanced
screeds, grouts and adhesives as well as coved fillets:
• For levelling and patching mortars down to the thinnest of coats.
• For producing floor toppings with increased freedom from dust and cracks as well as increased flexibility.
• As a bonding aid with splatterdash coats.
• To improve the bond, flexibility and freedom from cracks in renders.
• As a bonding and barrier coat for mortar bases in concrete construction joints e.g. between floor slabs and walls (coved
fillet mortar).
• For wear resistant toppings in hydraulic engineering constructions, sewerage pipes, sewerage works etc.
• For pointing masonry work.
• As an adhesive for anchoring slabs – ceramic, natural and agglomerate stone - as well as insulation panels and
lightweight construction boards.
• As an additive to improve the bond and resilience of coloured lime and cement-based coatings.
• For producing mortars with increased chemical resistance.
• As a protective coat for fresh concrete, ASOPLAST-MZ impedes early drying out of green concrete.
Technical Data:
Basis:
Density:
Colour:
Consumption:
Storage:
244
Styrene-butadiene polymer emulsion
1,0 kg/lt
White
depends on application, stir before use
frost free, 24 months in the original unopened container. Use opened containers promptly.
+5°C to +25°C
BENFER
AQUAFIN®-LATEX
Bonding Emulsion - Additive for Screeds and Mortars - Protection for new concrete
Consumption: depends on the
areas of application
Remark: Polyvalent
AQUAFIN-LATEX is a high concentrate bonding agent, free from
acetate and softening agents, used for creating polymer modified
mortars and screeds. The addition of AQUAFIN-LATEX improves
workability and enhances the physical properties of the mortars
and screeds.
AQUAFIN-LATEX can be used in multiple applications, including
the following:
• As an additive for creating levelling & patching mortars
• As a bonding agent in shotcrete
• As a bonding agent for mortars, plasters and lime & cement
paints
• As jointing material for masonry
Art. no/Colour
E/Kg
E/Package
Packing/Europallet
202300003/White
202300006/White
202300005/White
7,80
7,40
6,80
1.628,00/220 kg drum
24 drums/europallet
Advantages:
Through the addition of AQUAFIN-LATEX the following characteristics are achieved:
• Improved chemical resistance of cement mortars
• Prevents premature drying out of green concrete
• Improved bonding, flexibility and crack resistance of plaster mortars
• Decreased water permeability
• Increased freeze/thaw resistance
Typical Properties:
Basis:
Specific gravity:
Colour:
polymer emulsion based on styrene-butadiene copolymer
approx. 1.05 kg /lt
white
BENFER
245
ADIPLAST-M
Waterproofing admixture for mortar and concrete
ADIPLAST-M is a ready to use powder admixture specifically
designed for the production of waterre-sistant mortars & concretes.
ADIPLAST-M is a normal setting waterproof powder for producing
integrally watertight mortars and concretes. The risk of moisture
damage is greatly reduced by addition of ADIPLAST-M,
considerably extending the life expectancy of the structure.
Consumption:
Concrete: max. 1 % by weight of cement (approx. 500 g per 50
kg cement bag)
Cement mortar: max. 2 % by weight of cement (approx. 1 kg per
50 kg cement bag)
Remark: Polyvalent
Art. no/Colour
E/Kg
E/Package
Packing/Europallet
202444001 / Grey
202444002 /Grey
5,20
4,80
5,20 /1 kg bag
96,00 / 20 kg bag
1 kg/bag x 16/box
42 bags/europallet
Advantages:
• Increased watertightness & reduced permeability • Enhanced workability • Increases resistance to aggressive conditions
• Reduced water absorption • Increased compressive strength
• Improves anti-corrosive properties of mortar/concrete • Chloride free
Typical Properties:
Consistency:
powder
Colour:
grey
Storage & Shelf Life: 1 and 20 kg packs
Use immediately once opened. 12 months when stored in well ventilated & dry conditions away from direct sunlight in
original unopened packs.
Add ADIPLAST-M to the sand-cement-mixture in appropriate dosage and pre-mix intensively before water addition. Due to its
plasticising effect the appropriate water reduction must be taken into consideration. Depending on type of mixer a mixing
time of approx. 2-3 minutes is required.
Test results:
Test conditions: cement: mortar 1:6 (Cement:Standard Sand) dosage 2% by weight of cement initial slump approx. 155
mm storage +20° C/ 65 % relative air humidty
Consumption:
Concrete: max. 1 % by weight of cement (approx. 500 g per 50 kg cement bag)
Cement mortar: max. 2 % by weight of cement (approx. 1 kg per 50 kg cement bag)
Important notes:
Please observe valid EU safety data sheet.
246
BENFER
Capillary water absorption at 24 hours
Hydrophobication, water absorption at 24 hours
Compressive strength at 28 days
shall be used as general reference for the product. Legally binding is only the latest German technical data sheet or the latest
data sheet from one of our foreign subsidiaries inside their sales territory.
BENFER
247
ADIPLAST-P
Special-waterproofing admixture for producing high-quality plasters
ADIPLAST-P is a waterproofing plaster admixture designed to
improve workabilty, cohesiveness, hydrophobic properties and
increased built up thickness per layer in addition to a superb surface
finish. The addition of ADIPLAST -P significantly reduces mixing,
trowelling and finishing times due to the induced plasticising effect.
Primary Uses:
ADIPLAST-P is a normal setting waterproofing agent for producing
integrally watertight wall and facade plasters, also against driving
rain. The risk of moisture damage is greatly reduced by addition of
ADIPLAST-P and the life expectancy of the building is considerably
extended.
Consumption: 1-2% by weight
of cement in parts by weight
Remark: high-quality
Art.No.
E/Kg
E/Package
Packing/Europallet
202445001
202445002
4,80
4,50
72,00 /1 kg bag
112,50 /25 kg bag
16 Units/box
42 bags/europallet
Advantages:
• Improved & extended working ability • Ready to use admixture
• Increases resistance against aggressive influences • Reduced water absorption
• Provides plasters with excellent hydrophobic properties • Improved cohesion
Typical Properties:
Consistency: powder
Add ADIPLAST-P to the sand-cement-mixture in appropriate dosage and pre-mix intensively before water addition. Due to
its plasticising effect the appropriate water saving must be taken into consideration. Depending on type of mixer a mixing
time of approx. 2-3 minutes is required.
Test results:
Test conditions: cement: mortar 1:6 (Cement:Standard Sand) dosage 2% to the cement weight slump approx.145 mm
storage +20° C/ 65 % relative air humidity
Consumption:
1-2% by weight of cement in parts by weight
Storage:
Use immediately once opened. 12 months when stored in well ventilated & dry conditions away from direct sunlight in
original unopened packs.
Important notes:
Please observe valid EU safety data sheet.
248
BENFER
Capillary water absorption at 24 hours
Hydrophobication, water absorption at 24 hours,
testing tubes according to Karstens
Percentage of Air Voids
shall be used as general reference for the product. Legally binding is only the latest German technical data sheet or the latest
data sheet from one of our foreign subsidiaries inside their sales territory.
BENFER
249
Accessory products
BENFERDROP
Hydrophobic treatment for cement and lime-based products, brick and natural stone
•
•
•
•
•
•
Perfect on rough and exposed plaster
Waterproofing of cement joints
Easy to use
Effective and lasting protection
Prevents the formation of white salts
Ecological
Consumption:0,05 - 0,5 l/m²
depending on absorption
Remark: Effective and lasting
protection
Art. no.
E/Kg
E/Package
Packing/Pallet
000001485
000001490
10,20
12,00
51,00 / 5 kg can
12,00 /1 kg pot
100 cans/pallet
12 pots box
Hydrophobic treatment for cement and lime-based products, brick and natural
stone.
Eco-friendly and practically odourless white liquid consisting of siloxanes in a
solvent-free aqueous solution.
On drying, BENFERDROP becomes completely transparent and invisible, leaving
the original appearance and colour of treated surfaces unaffected.
The product’s superior water repellent properties protect substrates from troublesome
infiltrations of water that can result in blooming and permanent damp, or cause
parts of the substrate itself to break off or crumble due to frost.
BENFERDROP will not produce unsightly white efflorescence on treated surfaces.
Appearance:
White latex
Storage:
12 months in the original packaging, intact
Danger of harm:
No
Inflammability:No
Specif weight: 1,0 kg/dm3
pH:
Approx. 8
Coverage:
From 0,05 to 0,5 kg/m2 depending on absorption
Final hardening:
3 days
250
BENFER
Accessory products
BENFERCLEAN
Acid cleaner
• Cleaning hardened encrustations of cement or tile adhesives and
grouts from brick, cotto, ceramic tiles, fully vitrified stoneware,
natural stone, concrete, sanitary ware
• Cleaning efflorescence from cotto, joints between tiles, plaster,
etc.
• Cleaning cement mixers, scaffolding, cranes and other building
site equipment
• Cleaning stainless steel or chrome parts, or removing superficial
rust
Art. no
E/Kg
E/Package
Packing/Pallet
000001545
000001547
6,50
7,00
32,50 / 5 kg bucket
7,00 /1 kg pot
100 cans/pallet
12 pots box
An acid cleaner consisting of an inorganic acid solution with corrosion inhibitors.
It is suitable for cleaning hardened encrustations of cement, lime scale and
efflorescence from brickwork, ceramic tiles, cotto, cured cement, sanitary ware.
At the correct concentration, Benferclean is a mildly aggressive solution that acts
slowly and progressively to dissolve encrustations, avoiding violent chemical
attack on more soluble materials. This allows its penetrative action to be suitably
checked, especially on gaps, joints and fair-faced concrete. Once the excess
cleaner has been washed off with water, the dissolving action stops immediately,
preventing the damage that cleaners can often leave behind. The inclusion
of corrosion inhibitors means also that Benferclean can be used on anodized
aluminium, stainless steel and chrome without the risk of unwanted aggressive
attack.
Appearance:
Yellow liquid
Density:
1,05 kg/cm3
pH:
Approx. 1
Inflammability:No
Danger of harm:
Irritating to eyes and skin. Use safety goggles and
wear suitable protective clothing
BENFER
251
Accessory products
BENFERCLEAN STRONG
Buffered concentrated acid cleaner
• Cleaning hardened encrustations of cement or tile adhesives and
grouts from brick, cotto, ceramic tiles, fully vitrified stoneware,
natural stone, concrete, sanitary ware
• Cleaning efflorescence from cotto, joints between tiles, plaster,
etc
Remark: Concentrated
Art. no.
E/Kg
E/Package
Packing/Europallet
000001548
9,00
9,00/1 kg pot
12 pots box
BENFERCLEAN STRONG is a buffered concentrated acid cleaner that contains
corrosion inhibitors and is suitable for cleaning cement encrustations, limestone,
frosting on masonry surfaces, ceramics, stoneware, hardened concrete and
bathroom fittings.
Its concentrated formula can be diluted with water as desired. A ratio of 1:5 is
sufficient to dissolve encrustations rapidly.
LIMITATIONS: Do not use BENFERCLEAN STRONG on surfaces that could be
damaged by acid, like marble or terrazzo (including reconstituted products),
since it could cause unsightly opaqueness and corrosion.
Do not use on tiles or other glazed surfaces if the glaze is not acid-resistant.
Do not use on metallic surfaces.
Appearance:
Storage:
Dilution ratio with water:
Recommended dilution ratio:
Coverage:
Density:
pH:
Inflammability:
Danger of harm:
252
Yellow-green liquid
Any ratio
1:5
50 - 100 g/m2
1,05 kg/cm3
Approx. 1
+ 180°C
BENFER
Accessory products
BENFERCLEAN POLVERE
Acid cleaner
• Cleaning of encrusted cement or tile adhesives and hardened grouts
on bricks, terracotta, ceramics, porcelain stoneware, decorative
stone, concrete and bathroom fixtures
• Cleaning of salpetre mold on terracotta, joints between tiles, plaster,
etc
• Cleaning of concrete mixers, scaffolds, cranes and other construction
site equipment
• Cleaning of stainless steel or chrome
• Cleaning of rust stains
Remark: Powder
Art.no.
E/PC
E/Package
Packing/Europallet
000001546
14,00
336,00 /1 kg pot
24 pots box
It is a concentrated acid cleaner made up of
organic acid. It is suitable for cleaning encrusted
cement grouts, cement, mineral deposits and
mold on surfaces in latex, ceramics, terracotta,
hardened concrete and bathroom fixtures.
Does not release toxic or harmful fumes.
Appearance:
White powder
Storage:
In its original packaging
Duration:
24 months
Inflammability:No
Coverage:
Approx. 200 g/m2
Danger of harm:
BENFER
253
Accessory products
HOT MELT ADHESIVE STICKS
Hot melt adhesive in a stick
• Hot melt adhesive in a stick, applicable through an electric gun
for very rapid applications on all types of tiles
• Usual applications of the adhesive include preparations of panels
with ceramic tile samples, exhibitions with gluing on drywall and
wood conglomerates
Art. no
E/Kg
E/Package
000003255
15,00
75,00/5 kg box
Colour:
Odour:
Fusion temperature:
Open time:
Setting time:
Softening temperature:
Duration:
254
Transparent pale yellow
Slight odour only during utilization
180°C / 200°C
20 seconds
7 seconds
88°C
24 months
BENFER
Packing/Europallet
Accessory products
HOT MELT STICKS GUN
• Electric gun for hot melt sticks with 12 mm diameter
• Operates at 220 Volts
No.art.
E/PC
000003257
190,00
E/Package
Packing/Europallet
CARTRIDGE GUN
• Manual guns for silicone and acrylic sealant cartridges of
280/310 ml
Art. no
E/PC
4080/ Economical gun
4085/ Professional gun
8,00
28,00
BENFER
E/Package
Packing/Europallet
255
Accessory products
FIBREGLASS MESH
• It is used together with ACQUASHIELD, BENFERFINISH
and NIENTEMUFFA
Art. no./Width x Lenght
E/M
E/Package
000004110/1 m x 50 m White
2,80
140,00/ 50 meters roll
Packing/Europallet
Area mass:
135 ± 5 gr/m²
Mesh size:
5 x 5 mm
Total width:
1000 mm
Total length:
50 meters
Average depth:
0,45 ± 0,04 mm
Finisher:
Resistance to alkalis
% Elongation at break:
4 ÷ 6%
Colour:White
Packages:
Single rolls with 1 meter height and 50 meters length
Duration:
256
BENFER
Accessory products
SPACERS
• Spacers and wedges in plastic material in a + shape and T shape for
ensuring consistent joint measurements
Width mm
Art. no.
000003200
000003200
000003200
000003200
000003200
000003200
+ Spacer
+ Spacer
+ Spacer
+ Spacer
+ Spacer
+ Spacer
2 mm
3 mm
4 mm
5 mm
7 mm
10 mm
000003200 Wedge spacer from 0 to 5 mm
000003200 Wedge spacer from 0 to 10 mm
000003200
000003200
000003200
000003200
000003200
000003200
T
T
T
T
T
T
Spacer 2 mm
Spacer 3 mm
Spacer 4 mm
Spacer 5 mm
Spacer 7 mm
Spacer10 mm
Height
Pcs/Packet
2
3
4
5
7
10
0-5
0-10
2
3
4 5
7
10
Packets/Package
E/Packet
E/Package
250
250
250
250 250
250
60
48
40
40
40
32
3,00
3,00
3,00
3,40
3,40
4,80
180,00
144,00
120,00
136,00
136,00
153,60
500
500 40
20
4,80
4,80
192,00
96,00
250
250
250
250
250
250
60
60
60
40
40
40
3,00
3,00
3,00
3,40
3,40
4,80
180,00
180,00
180,00
136,00
136,00
192,00
BENFER
257
Guideline instructions for surface preparation
CONTENTS
1.
2.
3.
4.
5.
Introduction
Inspection of substrate (preliminary survey)
General surface-condition requirements
Creation of surface profile
Preparation methods
1. INTRODUCTION
The following surface preparation guideline shall be used as an aide to project engineers, owners,
specifiers and contractors. The most important factor for a long term performance of construction
material applications (decorative or protective coating etc.) and for a proper adhesion to the
substrate are its inspection, evaluation and preparation. The surface should be prepared so that
a good mechanical bond is achieved between the applied system and the substrate.
According to most construction contract procedures (standard in Germany), one of the services of
the contractor is to inspect the substrate for its suitability for application of the prescribed topping.
He must inform customer in writing of any objections to the way the work is executed if this does
not correspond to the required substrate condition.
A proper surface preparation includes the following:
• Inspection of the substrate
• Decontamination of the surface
• Repair of surface defects
• Cleaning of surfaces
• Creation of surface profile
2. INSPECTION OF THE SUBSTRATE (preliminary survey)
First conduct the preliminary survey to determine what kind of surface condition is required.
Depending on the actual condition of the substrate, methods for any necessary preparation and
repair can be selected. Prior to contracting for a job examine the surface for the presence of
separating and loose adherent substances such as dust, dirt, laitance, grease, efflorescence,
curing agents, paint residues and other contaminations. Residues of even small amounts of surface
contaminations impair and reduce coating adhesion to the substrate and must be removed. If
excessive laitance is present (a weak layer of cement and fines brought to the surface by
bleedwater), this material must be removed.
258
BENFER
Furthermore the substrate must be suitable to carry the static and thermal loads which are
expected. The substrate examination ranges from optical examination to intensive laboratory
testing. Before surface preparation begins, all surfaces should be visually inspected for presence
of defects, physical and chemical damage, contamination, curing agents and excess moisture.
Small defects or damages:
Increased defects or damages:
visual evaluation and simple inspection
intensive tests in the laboratory
The following table shows a list of simple inspection procedures
before surface preparation:
Inspection
loose pieces, delaminated areas
laitance
efflorescence
moisture content
surface strength
absorbency
cracks
oil- and grease – separating agent
dust
alkalinity
Test method
visual check
scrape and/or grind,
afterwards moistening test with water
visual check
visual check and scrape test
adhesive tape check
cover with membrane
carbide method (CM-Device)
Darr-method (laboratory method)
ASTM E1907, §7.6 test
(Quantitative Anhydrous Calcium Chloride Test)
scrape test with knife
moistening test with water
visual check
dampen with water
crack magnifying glass
crack width measure
sprinkle test with water
wipe method
wipe with a dark cloth
dampen with indicator paper and
neutral (distilled) water
BENFER
259
Inspection of surface moisture
Residual moisture in cementitious substrates, dry or damp by the German “guidelines for the
protection and renovation of concrete structures” (DafStb) part 2, clause 1.2.5 states:
“Dry”:
An approximately 2 cm deep freshly prepared cut-out area may not become visibly lighter as a
result of drying out. (In cases of doubt the concrete is considered dry if it shows moisture balance
for the climatic conditions 23/50: i.e. dependent on concrete type other absolute values are
considered as “dry”).
“Damp”:
The surface has a matt damp appearance but should not exhibit a shiny film of water. The pores
of the substrate may not be saturated, i.e. water droplets applied must be absorbed and after a
short time period the surface must once again appear matt.
Regard following recommendations to substrate dampness for several products (But please
observe the technical data sheets for detailed information.)
impregnation
products
AQUAFIN-IB2
ASOLIN-WS
✓
✓
ESCO-FLUAT
ASO-Unigrund-GE
ASO-Unigrund-K
✓
priming
ASOCRET-HB-flex
ASOL-FE
260
recommended surface dampness
dry
can/should
must be
be damp
damp
INDUFLOOR-IB1225
INDUFLOOR-IB1240
✓
✓
✓
✓
✓
✓
INDUFLOOR-IB1245
✓
INDUFLOOR-IB1250
INDUFLOOR-IB1260
INDUFLOOR-IB1270
INDUFLOOR-IB2385
✓
✓
✓
✓
BENFER
levelling
products
dry
ASO-EZ2
✓
ASOEZ2-Plus
✓
ASO-EZ4
✓
✓
ASO-EZ6
ASO-EZ-LIGHT-Plus
ASO-NM15
✓
ASOCRET-BS2
✓
ASOCRET-IM
✓
ASOCRET-RN
✓
ASOCRET-RS
✓
waterproofing
✓
✓
AQUAFIN-1K
✓
AQUAFIN-2K
✓
AQUAFIN-2K/M
✓
AQUAFIN-IC
✓
AQUAFIN-RS300
✓
AQUAFIN-TC07
COMBIDIC - 1K
✓
✓
COMBIDIC - 2K
COMBIFLEX-C2
✓
✓
COMBIFLEX-C2/S
COMBIFLEX-EL
SANIFLEX
✓
✓
✓
restoration
SOLOCRET - 15
SOLOCRET - 50
✓
✓
THERMOPAL-FS33
✓
THERMOPAL-GP11
✓
THERMOPAL-SR24
✓
THERMOPAL-SR44
INDUFLOOR-IB3310
✓
✓
INDUFLOOR-IB3350-VC2
INDUFLOOR-IB3357
INDUFLOOR-IB3360
must be
damp
✓
SOLOPLAN-12
SOLOPLAN-30
coating
can/should
be damp
✓
✓
✓
BENFER
261
PCC-Systems
tile setting
products
dry
BENFERFIX EXTRA
✓
✓
✓
✓
BENFERFLEX C2
BENFERGRES
BENFERGRIP +
LIGHTFLEX
MONOFLEX - XL
SOLOFLEX
can/should
be damp
must be
damp
✓
✓
✓
INDUCRET-BIS-0/2
INDUCRET-BIS-1/6
INDUCRET-BIS-5/40
✓
✓
✓
INDUCRET-VK30
INDUCRET-VK100
✓
✓
INDUBOND-VK4031
INDUBOND-VK4032
✓
✓
3. GENERAL SURFACE CONDITION REQUIREMENTS
Project specifications should define substrate uniformity, cleanness, roughness and concrete strength
prior to a coating installation. Proposals for specifications are cleaning methods, profiling methods,
and surface defect repair procedures.
Observe the steps listed below before installation of the system applied on the substrate:
• Any contaminations such as dust, dirt, oil, grease, laitance, form release agents and other
contaminants must be removed from the substrate.
• Surface defects (such as broken pieces, delaminated areas etc.) or cracks, spalls and voids
should be filled with an appropriate repair material.
• If corrosion of the existing steel reinforcement exists, the steel and concrete must be repaired
prior to placement of the system.
• The surface always should be rough enough to establish a good mechanical bond.
4. CREATION OF SURFACE PROFILE
The purpose of surface preparation is to roughen the surface, creating increased surface
area for mechanical bonding.
The roughening is typically referred to as the anchor pattern or profile. Prepared by the
International Concrete Repair Institute (ICRI), nine distinct profile replicates of the concrete surface
262
BENFER
provide visual as well as tactile examples that may be produced by one or more preparation
methods. Each profile carries a CSP (= Concrete Surface Profile) number ranging from a base line
CSP 1 (nearly flat) through CSP 9 (very rough).
CSP 1:
CSP 2:
CSP 3:
CSP 4:
CSP 5:
CSP 6:
CSP 7:
CSP 8:
CSP 9:
acid etching
grinding
light shotblast
light scarification
medium shotblast
medium scarification
heavy abrasive blast
scabbled
heavy scarification
The table below shows a classification of concrete surface roughness for following products.
THIS IS ONLY A RECOMMENDATION and for many products one or more Concrete Surface
Profiles are possible depending on the substrate conditions.
Refer to following recommendations to avoid coating failures caused by inadequate surface
roughness.
products
AK7P
tile adhesive *
concrete surface profile
CSP
2
CSP
3
CSP
4
CSP
5
CSP
6
CSP
7
CSP
8
CSP
9
✓
✓✓✓✓◆◆◆◆
✓
✓
✓
✓
✓✓✓✓◆◆◆◆
✓✓✓✓◆◆◆◆
✓✓✓✓◆◆◆◆
✓✓✓✓◆◆◆◆
✓✓✓✓◆◆◆◆
BENFERGRIP +
LIGHTFLEX
✓
✓
✓
✓✓✓✓◆◆◆◆
✓✓✓✓◆◆◆◆
MONOFLEX - XL
SOLOFLEX
ASOCRET-GM10
✓
✓ ✓
✓✓✓✓◆◆◆◆
✓✓✓✓◆◆◆◆
✓✓✓✓✓✓✓✓
INDUCRET-BIS-0/2
INDUCRET-BIS-5/40
✓
✓
✓
✓✓✓✓✓✓✓✓
✓✓✓✓
✓✓✓✓✓✓✓✓
INDUCRET-VK30
INDUCRET-VK100
INDUBOND-VK4031
INDUBOND-VK4032
✓
✓
✓
✓
✓✓✓✓✓✓✓✓
✓✓✓✓✓✓✓✓
✓✓✓✓
✓✓✓✓
ASODUR-EK98-floor
CSP
1
ASODUR-EK98-wall
BENFERFIX EXTRA
BENFERFLEX C2
BENFERGRES
INDUCRET-BIS -1/6
BENFER
263
Instructions générales concernant la préparation de la surface
restoration
waterproofing
levelling
products
CSP
1
CSP
2
CSP
3
CSP
4
CSP
5
CSP
6
CSP
7
CSP
8
CSP
9
ASO-EZ2
✓
✓
✓
✓
✓
✓
✓
✓
✓
ASO-EZ2-Plus
ASO-EZ4
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
ASO-EZ6
✓
✓
✓
✓
✓
✓
✓
✓
✓
ASO-EZ-Light-Plus
✓
✓
✓
✓
✓
✓
✓
✓
✓
ASO-NM15
✓
✓
✓
✓
✓
✓
✓
✓
✓
ASOCRET-BS2
✓
✓
✓
✓
✓
✓
✓
✓
✓
ASOCRET-IM
✓
✓
✓
✓
✓
✓
✓
✓
✓
ASOCRET-RN
✓
✓
✓
✓
✓
✓
✓
✓
✓
ASOCRET-RS
✓
✓
✓
✓
✓
✓
✓
✓
✓
SOLOPLAN-12
SOLOPLAN-30
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
AQUAFIN-1K
✓
✓
✓
✓
✓
✗
✗
✗
✓
✓
✓
✓
✗
AQUAFIN-2K
AQUAFIN-2K/M
✓
✓
✓
✓
✓
✓
AQUAFIN-IC
AQUAFIN-RS300
✓
✓
✓
✓
✓
AQUAFIN-TC07
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
COMBIDIC-1K
COMBIDIC-2K
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
COMBIFLEX-C2
✓
✓
✓
✓
✓
COMBIFLEX-C2/S
✓
✓
✓
✓
✓
COMBIFLEX-EL
✓
✓
✓
✓
✓
SANIFLEX
✓
✓
✓
✓
✓
SOLOCRET - 15
✓
✓
✓
✓
✓
SOLOCRET - 50
✓
✓
✓
✓
✓
✓
✓
✓
✓
THERMOPAL-FS33
✓
✓
✓
✓
✓
THERMOPAL-GP
✓
✓
✓
✓
✓
✓
✓
✓
✓
THERMOPAL-SR24
✓
✓
✓
✓
✓
✓
✓
✓
✓
THERMOPAL-SR44
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
INDUFLOOR-IB3350-VC2
✓
✓
✓
INDUFLOOR-IB3357
✓
✓
✓
INDUFLOOR-IB3360
✓
✓
✓
coating
INDUFLOOR-IB3310
264
BENFER
PCC-Systems
tile setting*
products
CSP
1
CSP
2
CSP
3
CSP
4
CSP
5
CSP
6
CSP
7
CSP
8
CSP
9
AK7P
ASODUR-EK98-floor
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
◆
◆
◆
◆
◆
◆
◆
◆
ASODUR-EK98-wall
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
✓
✓
✓
✓
✓
◆
◆
◆
◆
BENFERGRIP +
LIGHTFLEX
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
◆
◆
◆
◆
◆
◆
◆
◆
MONOFLEX - XL
✓
✓
✓
✓
✓
◆
◆
◆
◆
SOLOFLEX
✓
✓
✓
✓
✓
◆
◆
◆
◆
ASOCRET-GM10
INDUCRET-BIS-0/2
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
INDUCRET-BIS -1/6
✓
✓
✓
✓
✓
INDUCRET-BIS-5/40
✓
✓
✓
✓
✓
✓
✓
✓
✓
INDUCRET-VK30
✓
✓
✓
✓
✓
✓
✓
✓
✓
INDUCRET-VK100
INDUBOND-VK4031
INDUBOND-VK4032
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
BENFERFIX EXTRA
BENFERFLEX C2
BENFERGRES
* The substrate must have a sufficient surface evenness for tile setting.
7 = Also use to level substrate for subsequent waterproofing.
u = For a sufficient surface smoothness for subsequent laying of
tiles specify first a surface leveling with thin bed mortar.
5. PREPARATION METHODS
Surface preparation is usually necessary to create an increased surface area that is rough enough
for mechanical bonding.The types of surface preparation may vary, from detergent scrubbing or
low pressure water cleaning to aggressive methods such as heavy scarification.
Following an overview of common surface preparation methods:
BENFER
265
Method
detergent
scrubbing
Description
Removal
CSP
chemical removal to
oil, grease, organic or
produce a clean surface
inorganic residues, some
and prepare surfaces for acrylic, wax etc.
the application of sealers,
hardeners or adhesives
1
use to rinse away dirt,
dust etc. generated by
more aggressive methods
dirt and loose, weak
material, debris, watersoluble contaminants
1
chemical removal to
clean surfaces before
application of thin-film
sealers or coatings (etch
with hydrochloric, citric
or phosphoric acid)
cement paste of concrete
1-3
reduce or smooth slight
surface irregularities
mineral deposits and thin
coatings, efflorescence,
rust and other oxidized
deposits
1-3
clean and profile
contaminations and thin,
concrete surfaces for
brittle coatings, adhesive
the application of sealers, films
coatings, and polymer
overlays
2-4
low-pressure water cleaning
(less than 35 bar)
acid etching
grinding
abrasive (sand) blasting
266
BENFER
Method
Description
Removal
CSP
clean and roughen
some existing coatings,
surfaces in one step for
adhesives, and surface
the application of sealers, contaminations
coatings, or polymer
overlays
2-8
create a profile of
concrete surfaces,
method also know as
concrete planing,
milling
high spots and level
slabs,brittle coatings,
deteriorated or
contaminated concrete,
adhesives
4-9
water is sprayed with
suitable pressures and
nozzle tips
heavy encrustations of dirt
and loose, weak material,
laitance, efflorescence,
dirt or water-soluble
contaminants; carbonated,
freeze/thaw damaged or
weakened material, some
high-strength coatings
5-8
deep profiling of concrete concrete or brittle coatings,
surfaces for placement of deteriorated or contaminaoverlays or resurfacing
ted concrete layers
materials
6-9
shotblasting
scarifying
high-pressure water jetting
(35 to 300 bar)
scabbling
BENFER
267
Standards
All Benfer products are in full accordance with
European regulations, in particular, the regulations
governing the conformity of products in regards to
directive EEC 89/106.
Conformity with directive EEC 89/106 is
mandatory for some types of construction materials,
and particularly for products and systems for
reparation and restoration of concrete structures, for
floor and wall adhesives, for premixed screed and
plasters.
These construction materials must bear the CE
marking on their packages in order to be sold in the
European Community.
In order for the packaging to bear the CE marking,
the manufacturer must possess a declaration
of conformity to reference standards and must
demonstrate having met said standards by means
of specific testing.
The raw materials, the production processes and
the products in question must also be controlled
according to a plan with periodical tests defined by
law.
Therefore, conformity with directive EEC
89/106 ensures the quality of the products and
their suitability for the manufacturer’s indicated
applications.
Here below you find the main information related
to some norms, and the explanation of the mean
of the related symbols. These norms are written
with the intention to give you basic information.
These information are not comprehensive and does
not consider European and national directives
that should be applicable to the products even
depending their destination.
ADHESIVES FOR CERAMICS
Regulation EN 12004
This regulation establishes the testing criteria and methods for the classification of ceramic floor and wall
covering adhesives and related materials.
It divides the adhesives into 3 categories differentiated by a letter of the alphabet:
C = cementitious. Cement-based powder adhesives to be mixed with water or other appropriate
liquids at the moment of use in the construction site.
D = dispersion. Synthetic polymer-based paste adhesives in water dispersion. These are ready for use.
R = reactive. Adhesives made up of two or more compounds that must be mixed at the moment
of use in the construction site.
For each of these three categories, there are two distinct classifications based on resistance test results:
Classe 1 =
normal adhesive, which reaches the minimum required resistance levels in all tests.
Classe 2 =
Extra-strength adhesive with a higher resistance than that required by Class 1.
268
BENFER
Standards
The regulations also specify additional characteristics that Class 1 and 2 adhesives can have. These
characteristics are as follows:
E =
extended open time
T = slip resistant
F = fast setting
O
12004
C2F
DE
IZI
SIV
O CEMENT
A
Product
category
Additional
characteristic
NORMA EURO
LLA
CONFORME
ALLA NORMA
EUROPEA EN 12002
EN
PEA
CONFORME A
Class of
resistance
Reference
standard
Reference
standard
S1
Class of
deformability
ADESIVO
CEMENTIZIO
Regulation EN 12002
This regulation establishes (among other things) the test criteria and methods for the classification of floor
and wall covering adhesives in ceramics and similar materials based on their deformability.
These are divided into two groups:
S1= deformable adhesives. Adhesives that reach deformability of ≥2,5 mm in specific tests.
S2 = highly deformable adhesives. Adhesives that reach deformability of ≥5 mm in specific tests.
Regulation EEC 89/106
This regulation establishes (among other things) that our adhesives for flooring and coverings meet the
minimum testing requirements in compliance with EN 12004 and that raw materials, the production
processes and the finished product are subject to a control plan, including specific testing and periodicity.
BENFER
269
Standards
GROUTS FOR TILE JOINTS
Regulation EN 13888
This regulation establishes the test criteria and methods for the classification of grouts for tile joints for
ceramics and similar materials.
It divides the grouts into 2 categories distinguished by letters of the alphabet:
CG = cementitious. Cement-based powder grouts to be mixed with water or an appropriate liquid at
the moment of use in the construction site.
RG = eactive. Grouts made up of two or more compounds that must be mixed at the moment of
use in the construction site.
For the products in category CG, there are two distinct classifications based on test results:
Classe 1
= normal grout, which reaches the minimum required levels in all tests.
Classe 2
= grout with reduced water absorption and high abrasion resistance.
At the moment there is no CE marking for these types of materials.
Class of
resistance
FO
CON RME A
L
NORMA EURO
LA
CG2
270
IG
ILLA
TIV
NTE REATT
BENFER
O
IO
Reference
standard
S
SI
GI
LLA
TIZ
NTE CEMEN
RG
Product
category
N 13888
A E
PE
NORMA EURO
LLA
EN 13888
PEA
CONFORME
A
Product
category
Reference
standard
Standards
LIQUID APPLIED WATER IMPERMEABLE
PRODUCTS FOR USE BENEATH CERAMIC
TILING BONDED WITH ADHESIVES
STANDARD EN 14891:2007
This standard establishes criteria, test methods and requirements for the evaluation of conformity,
classification and designation of liquid applied water impermeable products for use beneath ceramic
tiling bonded with adhesives.
The products are classified into three types:
CM cementitious liquid-applied water impermeabile products
DM dispersion liquid-applied water impermeabile products
RM reaction resin liquid-applied water impermeabile products
To comply to the standard the products must have among other an adhesion strenght ≥ 0,5 N/mm² in
all the tests, a crack bridging ≥ 0,75 mm and must not allow water penetration.
For each types the follow optional features are provided:
O
with crack bridging ability at low temperature (-5°C)
P
resistant to contact with chlorinated water
BENFER
271
Standards
PREMIXED MORTARS FOR SCREED
Regulation EN 13813
This regulation establishes the test criteria and methods for the classification of premixed mortars for screed.
CT
= Premixed mortars for cement screed. Cement-based premixed powder to be mixed with water
at the moment of use in the construction site.
C
= Compression strength after 28 days (N/mm²)
F
= Flexural strength after 28 days (N/mm²)
A1 fl = Flame resistant
Product
category
CONFORME ALLA NORMA
EUROPEA 13813
CT MASSETTI
CEMENTIZI
C30-F6
A1 fl
Resistance
to compression
Reference
standard
Resistance to
bending
Flame
resistance
Regulation EEC 89/106E
This regulation establishes (among other things) that minimum test requirements for premixed mortars for
screed provided by the regulation EN 13813, and that raw materials, production processes and finished
products are subject to a control plan with defined periodical testing.
272
BENFER
Standards
PRODUCTS AND SYSTEMS FOR THE
PROTECTION AND REPAIR OF CONCRETE
STRUCTURES
EN 1504
THESE PRODUCTS ARE SUBJECT TO THE DIRECTIVE EEC 89/106
This standard sets criteria, test methods and requirements for the evaluation of conformity, the classification
and the designation of products and systems for the protection and repair of concrete structures.
Concrete repair products are divided in two categories which preview four classes:
STRUCTURALNON STRUCTURAL
Class R4 / Class R3
Class R2 / Class R1
To be classified R4 and R3 the products must show higher resistance in all the tests preview respect
the products classified R2 and R1, the elastic modulus higher than the limit fixed by the standard and
overcome the carbonation resistance test.
screed provided by the regulation EN 998-1, and that raw materials, production processes and finished
BENFER
273
Standards
PREMIXED MORTARS FOR PLASTER
Regulation EN 998-1
This regulation establishes (among other things) the test criteria and methods for the classification of
premixed mortars for plaster. Restoration and renovation plaster must meet all Class R requirements.
L LA
CONFOR
EA
M
AL
TA
P
N O R MA E UR O
PE
R
A
998-1
EN
M
O
NT
ER RISANAME
screed provided by the regulation EN 998-1, and that raw materials, production processes and finished
274
BENFER
Selection guide
TABLES
> FLOOR TILE ADHESIVES CHOICE GUIDE
276
> WALL TILE ADHESIVES CHOICE GUIDE
278
> PRIMERS CHOICE
280
BENFER
275
Floor tile adhesives choice guide
EN 12004 classiﬁcation
C2TES1C2TES1C2TES1C2TES1C2TES1 C2TE
C2E
C2TE C2FS1 C2FS1 C2FES1 C2F
UNIFIX-S3
BENFERFIX RAPIDO+
FLEXIBLE CEMLATEX
SOLUTION
BENFERFIX
RAPIDO
MONOFLEX-FB-IT
BENFERFLEX
RAPIDO
LEADERFLEX
RAPIDO
BENFERGRES
BENFERFLEX N
SOLOFLEX-IT
C2+
BENFERFLEX C2
SOLOFLEX-S1
MONOFLEX-XL
FLOOR TILE ADHESIVES
CHOICE GUIDE
tile’s surface, cm2
LIGHTFLEX
A D H E S I V E S F O R C E R A M I C T I L E S A N D S TA B L E N AT U R A L S T O N E S ,
C2FS2 C1TES2
SUITABLE SUBSTRATES
O
U
T
S
I
D
E
I
N
S
I
D
E
2
3
3600 3600 3600 3600 3600 2500 2500 2500 3600 3600 3600
Cement
screeds
3600 3600 3600 3600 3600 2500 2500 2500 3600 3600 3600 1600 3600 3600
Flexible
waterproofing
3600 3600 3600 3600 3600 2500 2500 2500 3600 3600 3600
3600 3600
Aged
concrete
3600 3600 3600 3600 3600 2500 2500 2500 3600 3600 3600
3600 3600
Cement screeds
standard or heated
100001 100001 100001 100001 100001 36002 36002 36002 100001 100001 100001 25003 100001 100001
Fluid heated screed
100001 100001 100001 100001 100001 36002 36002 36002 100001 100001 100001
cement based
Fluid anhydrite
heated screed
3600 3600
100001 100001 100001 100001 100001 36002 36002 36002
100001 100001
100001
Old tiles
3600 3600 3600 3600 3600 3600 3600 3600 3600 3600 3600 1600 3600 3600
Wooden
boards
1600 1600 1600 1600 1600
1600 1600 1600
3600 3600
Flexible
waterproofing
3600 3600 3600 3600 3600 3600 3600 3600 3600 3600 3600
3600 3600
T
E
R
R
A
C
E
Aged
concrete
3600 3600 3600 3600 3600 2500 2500 2500 3600 3600 3600
3600 3600
Cement
screeds
3600 3600 3600 3600 3600 2500 2500 2500 3600 3600 3600 1600 3600 3600
Flexible
waterproofing
3600 3600 3600 3600 3600 2500 2500 2500 3600 3600 3600
3600 3600
S
W
I
M
I
N
G
Aged
concrete
2200 2200 2200 2200 2200 1200 1200 1200
2200 2200
Cement
screeds
2200 2200 2200 2200 2200 1200 1200 1200
2200 2200
2200 2200 2200 2200 2200 1200 1200 1200
2200 2200
P
O
O
L
1
Aged
concrete
Steel
Flexible
waterproofing
4
with electric heating surface max 3600 water heating only surface max 2500
5
allowed with water heating only
tiles with water absorption > 3%
unheated only6 tiles with water absorption > 0,5%
276
BENFER
Floor tile adhesives choice guide
C2E
POWERPLAST D2
C2TE
BENFERGYPS
BENFERFIX EXTRA
C2TE
ADHESIVE FOR
INTERIOR
SOLOFLEX
ANHYDRITE
BENFERGRIP C2TE
CRISTALLITVARIO-light
ADHESIVE FOR
INTERIOR AND
EXTERIOR
BENFERGRIP+
BENFERJOLLY
MARMOFLEX
ASODUR-EK98
C2FS1 C2FS1 C2FE
CRISTALLITMULTI-FLEX
BENFERFIX SA+
CEMLATEX 600 SA
R27
BENFERGRIP+ CON
CEMLATEX 600
R2
UNIFIX-2K/6
C1TES2C2TES2 C2ES2
ASICRET-HB-FLEX
HIGH-PERFORMANCE
ADHESIVES FOR
NATURAL STONE
HIGH-PERFORMANCE
C1
D2TE
Rev.02/
23-05-2015
3600 3600 3600 3600 3600 3600 3600 2500
3600 3600 3600 3600 3600 3600 3600 2500
900
2500 2500 12005
3600 3600 3600 3600 3600 3600 3600 2500
3600 3600 3600 3600 3600 3600 3600 3600
1100
100001 100001 3600 10000 10000 100001 100001 36002 16003 36004 36004 20003-6
20002 1100
100001 100001 3600 10000 10000 100001 100001 36002
25004 25004
20002 1100
100001 100001
25004 25004
100001 20002 1100
3600 3600
11005
3600 3600 3600 3600 3600 3600 3600 3600
3600 1600 1600 1600 1600 1600 1600
1100
3600 3600 3600 3600 3600 3600 3600 3600
100001
11005
3600 3600 3600 3600 3600 3600 3600 2500
3600 3600 3600 3600 3600 3600 3600 2500
900
2500 2500 12005
3600 3600 3600 3600 3600 3600 3600 2500
2200 2200 2200 2200 2200
2200 2200 2200 2200 2200
1200
2200 2200 2200 2200 2200
Not allowed Fast setting
Treatment with specific primer
Paste adhesive
Two-component
BENFER
277
Wall tile adhesives choice guide
EN 12004 classiﬁcation
C2TES1C2TES1C2TES1C2TES1C2TES1 C2TE
C2E
BENFERFIX SA+
CEMLATEX 600 SA
BENFERGRIP+ CON
CEMLATEX 600
UNIFIX-2K/6
UNIFIX-S3
BENFERFLEX
RAPIDO
LEADERFLEX
RAPIDO
BENFERGRES
BENFERFLEX N
SOLOFLEX-IT
C2+
BENFERFLEX C2
SOLOFLEX-S1
MONOFLEX-XL
WALL TILE ADHESIVES
CHOICE GUIDE
tile’s surface, cm2
LIGHTFLEX
ADHESIVES FOR CERAMIC TILES AND STABLE NATURAL STONES,
C2TE C2FS1 C2FS1 C1TES2C1TES2C2TES2 C2ES2
SUITABLE SUBSTRATES
O
U
T
S
I
D
E
I
N
S
I
D
E
S
W
I
M
I
N
G
P
O
O
L
1
2
3
Aged
concrete
36001 36001 36001 36001 36001 20001 20001 20001 36001 36001 3600 3600 3600
Cement
screeds
36001 36001 36001 36001 36001 20001 20001 20001 36001 36001 3600 3600 3600
Flexible
waterproofing
36001 36001 36001 36001 36001 20001 20001 20001 36001 36001 3600 3600 3600
Aged
concrete
3600 3600 3600 3600 3600 2000 2000 2000 3600 3600 3600 3600 3600 2000
Cement
based plaster
3600 3600 3600 3600 3600 2000 2000 2000 3600 3600 3600 3600 3600 2000
Concrete blocks
3600 3600 3600 3600 3600 2000 2000 2000 3600 3600 3600 3600 3600 2000
Plasterboard
3600 3600 3600 3600 3600 2000 2000 2000 3600 3600 3600 3600 3600
Gypsum boards
3600 3600 3600 3600 3600 2000 2000 2000
Wooden
boards
1600 1600 1600 1600 1600
Flexible
waterproofing
3600 3600 3600 3600 3600 2000 2000 2000 3600 3600 3600 3600 3600 2000
Aged
concrete
2200 2200 2200 2200 2200 1200 1200 1200
2200 2200 2200 2000
Cement
based plaster
2200 2200 2200 2200 2200 1200 1200 1200
2200 2200 2200 2000
2200 2200 2200 2200 2200 1200 1200 1200
2200 2200 2200 2000
1600 1600 1600 1600 1600
Steel
Flexible
waterproofing
up to 6 meters high
tiles with water absorption > 0,5%
tiles with water absorption > 3%
278
3600 3600 3600
4
5
tiles with water absorption < 3% surface max 1200
tiles with water absorption < 3% surface max 400
BENFER
BENFERFIX EXTRA
POWERPLAST D2
C2FS1 C2FS1 C2FE
ADHESIVE
FOR
INTERIOR
BENFERGRIP C2TE
R27
ADHESIVE FOR
INTERIOR AND
EXTERIOR
BENFERGRIP+
CRISTALLITVARIO-light
R2
MARMOFLEX
BENFERJOLLY
R2T
CRISTALLITMULTI-FLEX
ASODUR-EK98
HIGH-PERFORMANCE
ADHESIVES FOR
NATURAL STONE
DEKOGROUT-2K
HIGHPERFORMANCE
C2TE
C2TE
C2E
D2TE
Rev.02/23-05-2015
3600 3600 3600 16001 16001 16001
3600 3600 3600 16001 16001 16001 2000 2000 12005
3600 3600 3600 16001 16001 16001
3600 3600 3600 2000 2000 2000
20004
3600 3600 3600 2000 2000 2000 2000 2000 20002-
20004
3600 3600 3600 2000 2000 2000 2000 2000 20002
3600 3600 3600 2000 2000 2000 2000 2000
20004
2000 2000 20002
20004
1600 1600 1600
20004
3600 3600 3600 2000 2000 2000
1200
2200 2200 2200
2200 2200 2200
1200
2200 2200 2200
Not allowed Fast setting
Treatment with specific primer
Paste adhesive
Two-component
BENFER
279
WATER DISPERSION,
SINGLE COMPONENT
O
U
T
S
I
D
E
STARPRIM
ASO-Unigrund-S
ASODUR-SG2 thixx
ASODUR-SG2
ASODUR-SG3
C2TES1
C2TES1
C2TES1
C2TES1
C2TES1
C2FS1
C2FS1
C1TES2
200
200
30-80
200
ASOWOOD
ASO-Unigrund-K
SUITABLE SUBSTRATES
ASO-Unigrund-GE
CONSUMPTION grams/m2
BENFERPRIM
PRIMERS CHOICE
GUIDE
TWO COMPONENT
C1TES2
200-400
600-1000 600-1000 600-1000
50-100
per coat,
at least
at least
at least
2 coats
Aged
concrete
Cement
screeds
Cement screeds
with moisture <4%
Substrates subject
to rising moisture
Aged
concrete
Cement screeds
standard or heated
Fluid heated screed
cement based
Cement screeds
with moisture < 4%
I
N
S
I
D
E
Substrates subject
to rising moisture
Anhydrite screed
0,5% <moisture< 1%
Fluid anhydrite
heated screed
Old tiles
Old wooden floor
(abraded)
Wooden
boards
Oil contaminated
substrates
Not allowed Recommended-
280
BENFER
Possible
Rev.02/23-05-2015