- Alfa Meccanica Srl

COMPANY PROFILE
GENERAL INFORMATION
ALFA MECCANICA is a privately owned Company located in Sommariva del Bosco
(20 miles South of Turin- Italy) that has been active in aerospace technical fields
since 1975 as Supplier of some of the most important Aerospace Italian Companies.
ALFA MECCANICA has a workforce of 50 persons (including white and bleu collars).
The main Customers are:
GE AVIOAERO
LEONARDO (FINMECCANICA)
THALES ALENIA SPACE
SABCA
NEXEYA
ETHOSENERGY
Information and pictures to be considered “confidential”
(not to be disclosed to anyone without ALFA MECCANICA
written authorization)
June 2016
Page 1
TECHNICAL SKILLS (1)
ALFA MECCANICA activity is mainly focused on “high precision machining”.
The internally performed operations are:









3-4-5 axis NC milling,
NC turning
NC multi axis turning
EDM operations (die sinking and wire cutting)
trimming and drilling of honeycomb panels (both with aluminum
alloys skins or with carbon fibers skins)
manual GTA welding
dynamic balancing operations,
assembling operations (bushings, bearings, inserts, nuts)
functional tests of manufactured components (pressure tests,
flow tests)
ALFA MECCANICA is used to work with all aerospace high technology materials as
Aluminum Alloys, Stainless Steels, Titanium Alloys, Nickel Alloys(Inconel, Hastelloy),
etc… and very often also to manage the raw material procurement process from
properly certified and controlled Suppliers
Information and pictures to be considered “confidential”
(not to be disclosed to anyone without ALFA MECCANICA
written authorization)
June 2016
Page 2
TECHNICAL SKILLS (2)
ALFA MECCANICA is supported by a network of properly selected and certified
supplier Companies to perform several non destructive controls and special
processes as, for instance:










NC grinding
non destructive controls (FPI-RX-MPI)
Laboratory controls (as metallurgic controls of raw materials)
heat treatments
forming of sheet metal parts
normal and vacuum brazing operations
welding operations
surface treatments (painting, oxidations, plasma coatings
application, etc.)
Shot peening operations
Titanium cleaning
In case of external processes utilization ALFA MECCANICA normally carries the full
responsibility of the finished parts.
Information and pictures to be considered “confidential”
(not to be disclosed to anyone without ALFA MECCANICA
written authorization)
June 2016
Page 3
TECHNICAL SKILLS (3)
ALFA MECCANICA normally manufactures parts/assemblies following Customers
drawings and the associated technical/quality requirements. ALFA MECCANICA
“Production Engineering Department” is equipped with four CAD-CAM workstations
and the proper software to receive from Customers 2D-3D files (CATIA 5 and
ENOVIA VPLM software to work with CATIA files) and to generate internally all the
NC programs for the machining centers using CAD-CAM software (as MOLD PLUS,
WORK EXPLORER – MASTER CAM- WORK NC, etc..).
During the development phase of new products ALFA MECCANICA very often
supports Customers with “concurrent engineering” activity with the target of
obtaining the best compromise between the engineering requirements and the
associated manufacturing costs.
Information and pictures to be considered “confidential”
(not to be disclosed to anyone without ALFA MECCANICA
written authorization)
June 2016
Page 4
TECHNICAL SKILLS (4)
From the beginning of 2014 we have introduced a new F.P.I equipment with the
following characteristics:




Semiautomatic system with tanks capacity of 700 x 800 x 800 mm.
Methods of inspection IA3, ID2, ID3 according to ASTM 1417,
Personnel is already fully qualified according to NAS 410
NADCAP qualification achieved in November 12th, 2015.
Information and pictures to be considered “confidential”
(not to be disclosed to anyone without ALFA MECCANICA
written authorization)
June 2016
Page 5
ALFA MECCANICA QUALITY SYSTEM/CERTIFICATIONS
ALFA MECCANICA Quality System is certified ISO 2001:2008 (since June 2000)
and EN9100:2009 (since 2006).
ALFA MECCANICA has been certified by Customers to perform several
activities/processes as, for instance by AVIO AERO:
 Wire and sinker EDM
 TIG Welding
 Bushings/Bearings Installation
ALFA MECCANICA Inspection Room, equipped with a temperature/humidity
control system, has the most advanced measuring gauges (optical gauges,
outside/inside depth micrometer gauges, calipers, etc.), and three C.M.M.
(two managed by NT SURFER and PCDMIS software with maximum capacity
of 4000 x 2000 x 1500 mm and the third one still manually controlled) .
Information and pictures to be considered “confidential”
(not to be disclosed to anyone without ALFA MECCANICA
written authorization)
June 2016
Page 6
MAIN CUSTOMERS / ENGINE-AIRCRAFT-SPACE PROGRAMS
ALFA MECCANICA is a “well established” Supplier of some of the main Italian
aerospace Companies as GE AVIO AERO, LEONARDO ( fomer ALENIA AERMACCHI)
and THALES ALENIA SPACE.
 With reference to aircraft engine parts ALFA MECCANICA is currently
delivering parts to GE AVIO AERO parts for the following Programs: CF680C2/E1, GE90, GEnx, T700, PW800, PW1100, PW1400, SAM146, V2500,
TRENT900, TP400
 With reference to airplane parts ALFA MECCANICA is currently delivering
parts to LEONARDO (former ALENIA AERMACCHI), and recently also to SABCA,
for the following Programs: C27J, EUROFIGHTER TYPHOON, M346, F35, B767,
A350, FALCON 5X
 With reference to space applications ALFA MECCANICA is currently delivering
parts to THALES ALENIA SPACE for the following Programs: GALILEO, IRIDIUM,
CYGNUS. In the past ALFA MECCANICA has delivered parts for the following
Modules Programs: M.P.L.M., COLUMBUS, NODE 2 & 3, CUPOLA and ATV.
Information and pictures to be considered “confidential”
(not to be disclosed to anyone without ALFA MECCANICA
written authorization)
June 2016
Page 7
SAMPLES OF AIRCRAFT ENGINE PARTS
Information and pictures to be considered “confidential”
(not to be disclosed to anyone without ALFA MECCANICA
written authorization)
June 2016
Page 8
SAMPLES OF AIRCRAFT ENGINE PARTS
Information and pictures to be considered “confidential”
(not to be disclosed to anyone without ALFA MECCANICA
written authorization)
June 2016
Page 9
SAMPLES OF AIRCRAFT ENGINE PARTS
Information and pictures to be considered “confidential”
(not to be disclosed to anyone without ALFA MECCANICA
written authorization)
June 2016
Page 10
SAMPLES OF AIRCRAFT ENGINE PARTS
Information and pictures to be considered “confidential”
(not to be disclosed to anyone without ALFA MECCANICA
written authorization)
June 2016
Page 11
SAMPLES OF AIRCRAFT ENGINE PARTS
Information and pictures to be considered “confidential”
(not to be disclosed to anyone without ALFA MECCANICA
written authorization)
June 2016
Page 12
SAMPLES OF AIRCRAFT ENGINE PARTS
Information and pictures to be considered “confidential”
(not to be disclosed to anyone without ALFA MECCANICA
written authorization)
June 2016
Page 13
SAMPLES OF AIRCRAFT ENGINE PARTS
Information and pictures to be considered “confidential”
(not to be disclosed to anyone without ALFA MECCANICA
written authorization)
June 2016
Page 14
SAMPLES OF AIRCRAFT ENGINE PARTS
Information and pictures to be considered “confidential”
(not to be disclosed to anyone without ALFA MECCANICA
written authorization)
June 2016
Page 15
SAMPLES OF AIRCRAFT ENGINE PARTS
Information and pictures to be considered “confidential”
(not to be disclosed to anyone without ALFA MECCANICA
written authorization)
June 2016
Page 16
SAMPLES OF AIRCRAFT STRUCTURAL PARTS
Information and pictures to be considered “confidential”
(not to be disclosed to anyone without ALFA MECCANICA
written authorization)
June 2016
Page 17
SAMPLES OF AIRCRAFT STRUCTURAL PARTS
Information and pictures to be considered “confidential”
(not to be disclosed to anyone without ALFA MECCANICA
written authorization)
June 2016
Page 18
SAMPLES OF AIRCRAFT STRUCTURAL PARTS
Information and pictures to be considered “confidential”
(not to be disclosed to anyone without ALFA MECCANICA
written authorization)
June 2016
Page 19
SAMPLES OF PARTS FOR SPACE APPLICATIONS
Information and pictures to be considered “confidential”
(not to be disclosed to anyone without ALFA MECCANICA
written authorization)
June 2016
Page 20
SAMPLES OF PARTS FOR SPACE APPLICATIONS
WAVE GUIDES FOR GALILEO SATELLITES
Information and pictures to be considered “confidential”
(not to be disclosed to anyone without ALFA MECCANICA
written authorization)
June 2016
Page 21
SAMPLES OF PARTS FOR SPACE APPLICATIONS
HONEYCOMB PANELS FOR SATELLITES
Information and pictures to be considered “confidential”
(not to be disclosed to anyone without ALFA MECCANICA
written authorization)
June 2016
Page 22
SAMPLES OF PARTS FOR SPACE APPLICATIONS
Information and pictures to be considered “confidential”
(not to be disclosed to anyone without ALFA MECCANICA
written authorization)
June 2016
Page 23
PROTOTYPING AND ASSEMBLY JIGS FOR SPACE APPLICATIONS
Information and pictures to be considered “confidential”
(not to be disclosed to anyone without ALFA MECCANICA
written authorization)
June 2016
Page 24
ALFA MECCANICA MAIN PECULIARITIES
ALFA MECCANICA is very appreciated by current Customers for the following main
characteristics:
 Very flexible Customer oriented production organization
 Prototypes manufacturing capability, built up mainly in Space Business,
that means the habit of working following Engineering instructions (as
generated during development Programs) and the attitude of obtaining
good parts at the first shot.
 Excellent performances (both for quality of parts and consistent on time
deliveries ) in production programs.
ALFA MECCANICA could be considered a “potential Supplier” by new Customers
because of the following characteristics:
 Financially sound Company (demonstrated by the significant investments
made during the still in place world wide crisis period). As a matter of fact
in 2008 ALFA MECCANICA moved from the previous plant of 1500 square
meters to a new plant of about 10.000 square meters, of which 5700 are
now covered, ready for several new machining centers installation.
As a matter of fact since 2008 five new machining centers, 2 EDM new
machines and a ND testing facility have been installed. As a consequence
the staff has grown from 30 persons in 2008 to the actual 50 persons.
 Significant expansion capability of Production Activity (available in a short
time) due to:
o the brand new machining centers/tools installed
o the covered area still available for new machine tools installation
o the present level of activity (one shift + two shifts for 3 lathes and 3
machining centers )
Information and pictures to be considered “confidential”
(not to be disclosed to anyone without ALFA MECCANICA
written authorization)
June 2016
Page 25
CONTACT INFORMATION
For further general information please visit ALFA MECCANICA web site:
www.alfameccanicasrl.it
For any customized information need or to organize a visit of our plant, please get
in touch with the below listed persons of ALFA MECCANICA Commercial
Department:
Maurizio Burdese
Commercial Manager
E-mail: [email protected]
Mobile: +39-335 8320040
Davide Fusta
Sales Engineer – New Business Development
E-mail: [email protected]
Mobile: +39-338 7225875
Information and pictures to be considered “confidential”
(not to be disclosed to anyone without ALFA MECCANICA
written authorization)
June 2016
Page 26