omec serrature spa - Pendini Giorgio Srl
Transcript
omec serrature spa - Pendini Giorgio Srl
CHIAVI GREZZE ED IMPIANTI SPECIALI BLANK KEYS AND SPECIAL KEYING SYSTEMS - CHIAVI GREZZE - Blank keys - Cover per chiavi PIATTE - FLAT Key coverS Pag. 20 Pag. 23 -Utilizzo delle chiavi - Keys utilization Pag. 25 - Impianti speciali - Special keying systemS Pag. 26 17 18 Chiavi grezze Blank keys Chiave piccola - Small key mano COD. 103/04 DX lunghezza totale hand total length destra 103/04 DX right 4 46 0,009100 - sinistra 103/04 SX left 4 46 0,009100 - destra DX 5 49,5 0,009100 - sinistra 103/05 SX left 5 49,5 0,009100 - 103/05 right 103/04 SX Profilo: OMEC piccolo. Materiale: Ottone nichelato. Mano: Destra o sinistra. Applicazione: cod. 103/04 solo per cilindro 140/02 e blocchetto di chiusura cod. 210, cod. 103/05 per cilindri serie 140 (escluso 140/02) - 141 - 143. 103/05 DX Profile: Small OMEC. Material: Nickel-plated brass. Hand: Right or left. Application: cod. 103/04 only for cylinder 140/02 and dead bolt rim lock cod. 210, cod. 103/05 for cylinders series 140 (except 140/02) - 141 - 143. 103/05 SX Scala 1:1 - Scale 1-1 Chiave piccola colorata - Coloured small key lunghezza totale mano COD. total length hand destra 103/05 DX A right 5 inserto colore insert color 50,5 Arancio - Orange 0,008100 - destra B 5 50,5 Blu - Blue 0,008100 - destra 103/05 DX N right 5 50,5 Nero - Black 0,008100 - 103/05 DX right destra 103/05 DX R right 5 50,5 Rosso - Red 0,008100 - destra 103/05 DX V right 5 50,5 Verde - Green 0,008100 - Profilo: OMEC piccolo. Materiale: Ottone nichelato. Mano: Destra. Applicazione: Cilindri serie 140 (escluso 140/02) - 141 - 143. Profile: Small OMEC. Material: Nickel-plated brass. Hand: Right. Application: Cylinders series 140 (except 140/02) - 141 - 143. Scala 1:1 20 Scale 1-1 Chiavi grezze Blank keys Chiave grande - Big key 105/03 DX mano 3 47 0,010100 - sinistra 105/03 SX left 3 47 0,010100 - right destra 105/04 DX right 4 50,5 0,011100 - sinistra 105/04 SX left 4 50,5 0,011100 - 5 54 0,011100 - 5 54 0,011100 - destra 105/05 DX right sinistra 105/05 SX left 105/04 DX total length destra DX 105/03 105/03 SX lunghezza totale COD. hand Profilo: OMEC grande. Materiale: Ottone nichelato. Mano: Destra o sinistra. Applicazione: cod. 105/03 solo per cilindri 120/01 e 121/01, cod. 105/04 solo per cilindri 120/02 e 121/02, cod. 105/05 per cilindri serie 120 (escluso 120/01 e 120/02) – 121 (escluso 121/01 e 121/02) - 123. Profile: Big OMEC. Material: Nickel-plated brass. Hand: Right or left. Application: cod. 105/03 only for cylinders 120/01 and 121/01, cod. 105/04 only for cylinders 120/02 and 121/02, cod. 105/05 for cylinders series 120 (except 120/01 and 120/02) 121 (except 121/01 and 121/02) - 123. 105/04 SX 105/05 DX 105/05 SX Scala 1:1 - Scale 1-1 21 Chiavi grezze Blank keys Chiave piatta piccola - Small flat key COD. lunghezza totale total length 2040/06 6/9 67 0,017 50 - Profilo: OMEC piatto piccolo. Materiale: Ottone nichelato. Mano: Reversibile. Applicazione: Cilindri serie 2140 - 2141 - 2143 - 2240 - 2241 2243. Profile: Small flat OMEC. Material: Nickel-plated brass. Hand: Reversible. Application: Cylinders series 2140 - 2141 - 2143 - 2240 - 2241 - 2243. Scala 1:1 - Scale 1-1 Chiave piatta grande - Big flat key COD. 2020/06 6/9 lunghezza totale total length 67 0,01750 - Profilo: OMEC piatto grande. Materiale: Ottone nichelato. Mano: Reversibile. Applicazione: Cilindri serie 2120 - 2121 - 2122 - 2123 - 2126 - 2320 - 2321 - 2323. Profile: Big flat OMEC. Material: Nickel-plated brass. Hand: Reversible. Application: Cylinders series 2120 - 2121 - 2122 - 2123 - 2126 - 2320 - 2321 2323. Scala 1:1 22 Scale 1-1 Cover per chiavi piatte Flat key covers Per chiavi piatte For flat keys COD. 02040 A Materiale - Material Nylon arancio - Orange nylon Per chiavi piatte For flat keys COD. 0,00350 - 02040 R Per chiavi piatte For flat keys COD. 02040 B Materiale - Material Nylon blu - Blue nylon Nylon rosso - Red nylon 0,00350 - Per chiavi piatte For flat keys COD. 0,00350 - Materiale - Material 02040 V Materiale - Material Nylon verde - Green nylon 0,00350 - Per chiavi piatte For flat keys COD. 02040 L Materiale - Material Nylon lilla - Lilac nylon 0,00350 - Per chiavi piatte For flat keys COD. 02040 N Materiale - Material Nylon nero - Black nylon 0,00350 - 23 Chiavi grezze Blank keys Chiave a spillo - Cross key COD. lunghezza totale total length 41006 76 0,016 25 - 41016 100 0,022 25 - Profilo: OMEC a croce. Materiale: Acciaio nichelato. Mano: Unica. Applicazione: Cilindri a spillo e blocchetto di chiusura cod. 4220. Profile: Cross OMEC. Material: Nickel-plated steel. Hand: No hand. Application: Cross key cylinders and dead bolt rim lock cod. 4220. Scala 1:1 - Scale 1-1 Chiave a doppia mappa - Double-bit key leve COD. levers lunghezza totale total length 5100/066 80 0,021 50 - 5101/066 104 0,024 50 - Profilo: OMEC a doppia mappa. Materiale: Ottone nichelato. Mano: Unica. Applicazione: Serrature a doppia mappa. Profile: Double-bit key OMEC. Material: Nickel-plated brass. Hand: No hand. Application: Double-bit key locks. Scala 1:1 24 Scale 1-1 Utilizzo delle chiavi Keys utilization Articoli serie Chiave Series items Solo - Only 140/02 Key Impianti speciali Special keying systems KA MK GMK CL e blocchetto di chiusura cod. 210 and dead bolt rim lock cod. 210 103/04 140* 141 143 *Tranne - Except 140/02 103/05 Solo - Only 120/01 121/01 105/03 Solo - Only 120/02 121/02 105/04 120* 121* 123 *Tranne - Except 120/01 - 120/02 - 121/01 - 121/02 2141 2143 2240 2241 2243 MADE IN ITALY 2140 105/05 2040/06 2121 2123 - 2126 2320 2321 2323 MADE IN ITALY 2120 - 2122 2020/06 Cilindri a spillo e blocchetto di chiusura cod. 4220 Cross key cylinders and dead bolt rim lock cod. 4220 4100 4101 (lunga-long) Serrature a doppia mappa Double-bit key locks 5100/06 5101/06 (lunga-long) 25 Impianti speciali Special keying systems Gli impianti speciali sono realizzabili fra cilindri che utilizzino lo stesso tipo di chiave. The special keying systems can be assembled only with cylinders opened by the same key type. KA Impianto a chiave uguale Keyed alike system Tutti i cilindri sono aperti dalla stessa chiave. All cylinders are opened by the same key. KA Impianto a chiave uguale Keyed alike system Tutte le serrature sono aperte dalla stessa chiave. All locks are opened by the same key. KA Impianto a chiave uguale Keyed alike system Tutti i cilindri sono aperti dalla stessa chiave. All cylinders are opened by the same key. 26 Impianti speciali Special keying systems Gli impianti speciali sono realizzabili fra cilindri che utilizzino lo stesso tipo di chiave. The special keying systems can be assembled only with cylinders opened by the same key type. MK Impianto a chiave maestra Master key system Ogni cilindro é aperto dalla propria chiave che non può aprirne altri. Tutti i cilindri possono essere aperti dalla CHIAVE MAESTRA (MK) detta anche PASSE-PARTOUT. Each cylinder is opened by its own key, which can’t open any other. All cylinders can be opened by the master key (MK). GMK Impianto a chiave maestra generale Grand master key system Ogni cilindro é aperto dalla propria chiave che non può aprirne altri. Tutti i cilindri di uno stesso gruppo possono essere aperti dalla propria CHIAVE MAESTRA (MK1). Tutti i cilindri che compongono due o più gruppi di chiavi maestre, possono essere aperti da un’unica CHIAVE MAESTRA GENERALE (GMK) detta anche PASSE-PARTOUT GENERALE. Each cylinder is opened by its own key, which can’t open any other. All cylinders of a group can be opened by their own master key (MK1). All cylinders of two or more groups can be opened by the grand master key (GMK). CL Impianto a cilindro centrale Central locking system Ogni cilindro é aperto dalla propria chiave che non può aprirne altri, ma che può aprire il cilindro di uso comune (es. ingresso principale). Each cylinder is opened by its own key, which can’t open any other, but can open the cylinder of the main door. 27 Impianti speciali Special keying systems Cilindri con chiave cantiere (TK) Cylinders with temporary key (TK) La versione TK è disponibile con i “ Cilindri sagomati ( 6 perni )” serie 2120, 2121, 2122, 2123, 2126. TK version is available with “ Profile cylinders ( 6 pins )” series 2120, 2121, 2122, 2123, 2126. 1 2 3 Il cilindro funziona normalmente con la chiave cantiere (TK). Con l’inserimento e la rotazione della chiave proprietario la chiave cantiere viene disattivata. The cylinder normally works with the temporary key (TK). Once inserted and turned the owner key, the temporary key is disarmed. Chiave TK TK key Chiave proprietario Owner key 28 Chiave TK TK key CILINDRI CYLINDERS - CILINDRI OVALI (5 perni) - OVAL CYLINDERS (5 Pag. 33 pins) - Cilindri ovali (6 perni) - Oval cylinders (6 pins) - Cilindri ovali (9 perni) - Oval cylinders (9 pins) Pag. 41 Pag. 45 - Cilindri sagomati (5 perni) - Profile cylinders (5 pins) Pag. 48 - Cilindri sagomati (6 perni) - Profile cylinders (6 pins) Pag. 58 Pag. 79 Pag. 80 Pag. 87 -Pomoli per cilindro - Cylinder knobs - Cilindri sagomati (9 perni) - Cilindri a spillo - Profile cylinders (9 pins) - Cross key cylinders 29 30 32 Cilindri ovali (5 perni) Serie 140 Oval cylinders (5 pins) 5 perni (escluso cod. 140/02) 5 pins (except cod. 140/02) Resistente al grimaldello Picklock resistant Costruiti secondo i parametri della norma UNI EN 1303:2005 Durabilità: grado 6 (100.000 cicli) Sicurezza della chiave: grado 2 (oltre 5.000 combinazioni) Sistemistica: per 1 sistema MK (con alto livello di sicurezza) = 500 possibili cifrature (escluso cod. 140/02) Manufactured in accordance with parameters of standard UNI EN 1303:2005 Durability: grade 6 (100.000 cycles) Security of the key: grade 2 (over 5.000 combinations) Master keying potential: for 1 MK system (with high security level) = 500 possible combinations (except cod. 140/02) 33 Cilindri ovali (5 perni) Oval cylinders (5 pins) Doppio cilindro - Double cylinder CARATTERISTICHE COSTRUTTIVE: Corpo in ottone - Cilindretti in ottone - Perni e controperni in ottone - Molle in bronzo fosforoso - Camma verticale in acciaio autolubrificante - Chiavi in ottone nichelato. FUNZIONAMENTO: Rotazione della chiave di 360° - Le chiavi sono dipendenti e non possono azionare il cilindro se dall’altro lato é stata inserita e ruotata la chiave. PARTI IN DOTAZIONE: 3 chiavi. VARIANTI A RICHIESTA: Impianti speciali KA-MK-GMK-CL CONSTRUCTIVE FEATURES: Brass body - Brass plugs - Brass pins - Phosphor bronze springs - Steel vertical cam - Nichel-plated brass keys. WORKING: Turn the key 360° - The keys are dependent and cannot operate on the cylinder if on the other side the key was inserted and turned. PROVIDED WITH: 3 keys. ON REQUEST: Special keying systems KA-MK-GMK-CL COD. 34 LAB 140/02 47 23,523,5 4 103/04 0,14 1 10 140/03 542727 5 103/05 0,151 10 140/04 603030 5 103/05 0,171 10 140/05 602733 5 103/05 0,171 10 140/06 703535 5 103/05 0,201 10 140/07 702743 5 103/05 0,201 10 140/08 804040 5 103/05 0,221 10 140/09 802753 5 103/05 0,221 10 140/10 642737 5 103/05 0,181 10 140/11 653035 5 103/05 0,181 10 140/12 964353 5 103/05 0,261 5 140/13 10653 53 5 103/05 0,291 5 140/14 703040 5 103/05 0,20110 140/15 753045 5 103/05 0,21110 140/16 753540 5 103/05 0,21110 140/17 803545 5 103/05 0,22110 140/18 803050 5 103/05 0,22110 140/19 854045 5 103/05 0,23110 140/20 904050 5 103/05 0,241 5 140/21 904545 5 103/05 0,241 5 Cilindri ovali (5 perni) Oval cylinders (5 pins) Doppio cilindro nichelato - Nickel-plated double cylinder CARATTERISTICHE COSTRUTTIVE: Corpo in ottone nichel satinato - Cilindretti in ottone nichelato - Perni e controperni in ottone - Molle in bronzo fosforoso - Camma verticale in acciaio autolubrificante - Chiavi in ottone nichelato. FUNZIONAMENTO: Rotazione della chiave di 360° - Le chiavi sono dipendenti e non possono azionare il cilindro se dall’altro lato é stata inserita e ruotata la chiave. PARTI IN DOTAZIONE: 3 chiavi. VARIANTI A RICHIESTA: Impianti speciali KA-MK-GMK-CL CONSTRUCTIVE FEATURES: Satin nickel-plated brass body - Nickel-plated brass plugs - Brass pins - Phosphor bronze springs - Steel vertical cam - Nichel-plated brass keys. WORKING: Turn the key 360° - The keys are dependent and cannot operate on the cylinder if on the other side the key was inserted and turned. PROVIDED WITH: 3 keys. ON REQUEST: Special keying systems KA-MK-GMK-CL COD. 140/02 H LAB 47 103/04 0,14 140/03 H 542727 5 103/05 0,15110 140/04 H 603030 5 103/05 0,17110 140/05 H 602733 5 103/05 0,17110 140/06 H 703535 5 103/05 0,20110 140/07 H 702743 5 103/05 0,20110 140/08 H 804040 5 103/05 0,22110 140/09 H 802753 5 103/05 0,22110 140/10 H 642737 5 103/05 0,18110 140/11 H 653035 5 103/05 0,18110 140/12 H 964353 5 103/05 0,261 5 140/13 H 106 23,5 23,5 53 53 4 5 1 1 10 103/05 0,29 140/14 H 703040 5 103/05 0,20110 5 140/15 H 753045 5 103/05 0,21110 140/16 H 753540 5 103/05 0,21110 140/17 H 803545 5 103/05 0,22110 140/18 H 803050 5 103/05 0,22110 140/19 H 854045 5 103/05 0,23110 140/20 H 904050 5 103/05 0,241 5 140/21 H 904545 5 103/05 0,241 5 35 Cilindri ovali (5 perni) Oval cylinders (5 pins) Mezzo cilindro - Half cylinder CARATTERISTICHE COSTRUTTIVE: Corpo in ottone - Cilindretto in ottone - Perni e controperni in ottone - Molle in bronzo fosforoso - Camma verticale in acciaio autolubrificante - Chiavi in ottone nichelato. FUNZIONAMENTO: Rotazione della chiave di 360°. PARTI IN DOTAZIONE: 3 chiavi. VARIANTI A RICHIESTA: Impianti speciali KA-MK-GMK-CL CONSTRUCTIVE FEATURES: Brass body - Brass plug - Brass pins - Phosphor bronze springs - Steel vertical cam - Nichel-plated brass keys. WORKING: Turn the key 360°. PROVIDED WITH: 3 keys. ON REQUEST: Special keying systems KA-MK-GMK-CL COD. LAB 141/03 372710 5 103/05 0,11110 141/05 433310 5 103/05 0,13110 141/07 534310 5 103/05 0,15110 Mezzo cilindro nichelato - Nickel-plated half cylinder CARATTERISTICHE COSTRUTTIVE: Corpo in ottone nichel satinato - Cilindretto in ottone nichelato - Perni e controperni in ottone - Molle in bronzo fosforoso - Camma verticale in acciaio autolubrificante - Chiavi in ottone nichelato. FUNZIONAMENTO: Rotazione della chiave di 360°. PARTI IN DOTAZIONE: 3 chiavi. VARIANTI A RICHIESTA: Impianti speciali KA-MK-GMK-CL CONSTRUCTIVE FEATURES: Satin nickel-plated brass body - Nickel-plated brass plug Brass pins - Phosphor bronze springs - Steel vertical cam - Nichel-plated brass keys. WORKING: Turn the key 360°. PROVIDED WITH: 3 keys. ON REQUEST: Special keying systems KA-MK-GMK-CL COD. LAB 141/03 H 372710 5 36 103/05 0,111 10 141/05 H 433310 5 103/05 0,131 10 141/07 H 534310 5 103/05 0,151 10 Cilindri ovali (5 perni) Oval cylinders (5 pins) Doppio cilindro con pomolo - Double cylinder with knob CARATTERISTICHE COSTRUTTIVE: Corpo in ottone - Cilindretto in ottone - Perni e controperni in ottone - Molle in bronzo fosforoso - Camma verticale in acciaio autolubrificante - Pomolo in nylon nero - Chiavi in ottone nichelato. FUNZIONAMENTO: Rotazione della chiave o del pomolo di 360°. PARTI IN DOTAZIONE: 3 chiavi. VARIANTI A RICHIESTA: Impianti speciali KA-MK-GMK-CL CONSTRUCTIVE FEATURES: Brass body - Brass plug - Brass pins - Phosphor bronze springs - Steel vertical cam - Black nylon knob - Nichel-plated brass keys. WORKING: Turn the key or knob 360°. PROVIDED WITH: 3 keys. ON REQUEST: Special keying systems KA-MK-GMK-CL COD. LAB 143/03 542727 5 103/05 0,17110 143/04 603030 5 103/05 0,181 5 143/05 602733 5 103/05 0,181 5 143/06 603327 5 103/05 0,191 5 143/07 703535 5 103/05 0,211 5 143/08 702743 5 103/05 0,211 5 143/09 704327 5 103/05 0,221 5 143/10 804040 5 103/05 0,241 5 143/11 802753 5 103/05 0,241 5 143/12 805327 5 103/05 0,241 5 Doppio cilindro nichelato con pomolo - Nickel-plated double cylinder with knob CARATTERISTICHE COSTRUTTIVE: Corpo in ottone nichel satinato - Cilindretto in ottone nichelato - Perni e controperni in ottone - Molle in bronzo fosforoso - Camma verticale in acciaio autolubrificante - Pomolo in nylon nero - Chiavi in ottone nichelato. FUNZIONAMENTO: Rotazione della chiave o del pomolo di 360°. PARTI IN DOTAZIONE: 3 chiavi. VARIANTI A RICHIESTA: Impianti speciali KA-MK-GMK-CL CONSTRUCTIVE FEATURES: Satin nickel-plated brass body - Nickel-plated brass plug - Brass pins - Phosphor bronze springs - Steel vertical cam - Black nylon knob - Nichelplated brass keys. WORKING: Turn the key or knob 360°. PROVIDED WITH: 3 keys. ON REQUEST: Special keying systems KA-MK-GMK-CL COD. LAB 143/03 H 54 27 27 5 103/05 0,171 10 143/04 H 60 30 30 5 103/05 0,181 5 143/05 H 60 27 33 5 103/05 0,181 5 143/06 H 60 33 27 5 103/05 0,191 5 143/07 H 70 35 35 5 103/05 0,211 5 143/08 H 70 27 43 5 103/05 0,211 5 143/09 H 70 43 27 5 103/05 0,221 5 143/10 H 80 40 40 5 103/05 0,241 5 143/11 H 80 27 53 5 103/05 0,241 5 143/12 H 80 53 27 5 103/05 0,241 5 37 Cilindri ovali (5 perni) Oval cylinders (5 pins) Doppio cilindro con pomolo - Double cylinder with knob CARATTERISTICHE COSTRUTTIVE: Corpo in ottone - Cilindretto in ottone - Perni e controperni in ottone - Molle in bronzo fosforoso - Camma verticale in acciaio autolubrificante - Pomolo in ottone lucido verniciato - Chiavi in ottone nichelato. FUNZIONAMENTO: Rotazione della chiave o del pomolo di 360°. PARTI IN DOTAZIONE: 3 chiavi. VARIANTI A RICHIESTA: Impianti speciali KA-MK-GMK-CL CONSTRUCTIVE FEATURES: Brass body - Brass plug - Brass pins - Phosphor bronze springs - Steel vertical cam - Brass knob - Nichel-plated brass keys. WORKING: Turn the key or knob 360°. PROVIDED WITH: 3 keys. ON REQUEST: Special keying systems KA-MK-GMK-CL COD. LAB 143/03B 542727 5 103/05 0,221 10 143/04B 603030 5 103/05 0,231 5 143/05B 602733 5 103/05 0,231 5 143/06B 603327 5 103/05 0,241 5 143/07B 703535 5 103/05 0,261 5 143/08B 702743 5 103/05 0,261 5 143/09B 704327 5 103/05 0,271 5 143/10B 804040 5 103/05 0,291 5 143/11B 802753 5 103/05 0,291 5 143/12B 805327 5 103/05 0,291 5 Doppio cilindro nichelato con pomolo - Nickel-plated double cylinder with knob CARATTERISTICHE COSTRUTTIVE: Corpo in ottone nichel satinato - Cilindretto in ottone nichelato - Perni e controperni in ottone - Molle in bronzo fosforoso - Camma verticale in acciaio autolubrificante - Pomolo in ottone cromato - Chiavi in ottone nichelato. FUNZIONAMENTO: Rotazione della chiave o del pomolo di 360°. PARTI IN DOTAZIONE: 3 chiavi. VARIANTI A RICHIESTA: Impianti speciali KA-MK-GMK-CL CONSTRUCTIVE FEATURES: Satin nickel-plated brass body - Nickel-plated brass plug Brass pins - Phosphor bronze springs - Steel vertical cam - Chrome-plated brass knob - Nichel-plated brass keys. WORKING: Turn the key or knob 360°. PROVIDED WITH: 3 keys. ON REQUEST: Special keying systems KA-MK-GMK-CL COD. 38 LAB 143/03B H 54 27 27 5 103/05 0,221 10 143/04B H 60 30 30 5 103/05 0,231 5 143/05B H 60 27 33 5 103/05 0,231 5 143/06B H 60 33 27 5 103/05 0,241 5 143/07B H 70 35 35 5 103/05 0,261 5 143/08B H 70 27 43 5 103/05 0,261 5 143/09B H 70 43 27 5 103/05 0,271 5 143/10B H 80 40 40 5 103/05 0,291 5 143/11B H 80 27 53 5 103/05 0,291 5 143/12B H 80 53 27 5 103/05 0,291 5 Cilindri ovali Oval cylinders Mezzo cilindro con pomolo - Half cylinder with knob CARATTERISTICHE COSTRUTTIVE: Corpo in ottone - Camma in acciaio autolubrificante Pomolo in nylon nero. FUNZIONAMENTO: Rotazione del pomolo di 360°. PARTI IN DOTAZIONE: / VARIANTI A RICHIESTA: / CONSTRUCTIVE FEATURES: Brass body - Steel cam - Black nylon knob. WORKING: Turn the knob 360°. PROVIDED WITH: / ON REQUEST: / COD. 144/03 LAB 37 27 10 0,101 10 144/04 40 0,11 144/05 43 33 10 0,121 10 144/07 53 43 10 0,141 10 30 10 1 10 Mezzo cilindro nichelato con pomolo - Nickel-plated half cylinder with knob CARATTERISTICHE COSTRUTTIVE: Corpo in ottone nichel satinato - Camma in acciaio autolubrificante - Pomolo in nylon nero. FUNZIONAMENTO: Rotazione del pomolo di 360°. PARTI IN DOTAZIONE: / VARIANTI A RICHIESTA: / CONSTRUCTIVE FEATURES: Satin nickel-plated brass body - Steel cam - Black nylon knob. WORKING: Turn the knob 360°. PROVIDED WITH: / ON REQUEST: / COD. LAB 144/03 H 37 27 10 0,101 10 144/04 H 40 30 10 0,111 10 144/05 H 43 33 10 0,121 10 144/07 H 53 43 10 0,141 10 39 Cilindri ovali Oval cylinders Mezzo cilindro con pomolo - Half cylinder with knob CARATTERISTICHE COSTRUTTIVE: Corpo in ottone - Camma in acciaio autolubrificante Pomolo in ottone lucido verniciato. FUNZIONAMENTO: Rotazione del pomolo di 360°. PARTI IN DOTAZIONE: / VARIANTI A RICHIESTA: / CONSTRUCTIVE FEATURES: Brass body - Steel cam - Brass knob. WORKING: Turn the knob 360°. PROVIDED WITH: / ON REQUEST: / COD. LAB 144/03B 37 27 10 0,151 10 144/04B 40 30 10 0,161 10 144/05B 43 33 10 0,171 10 144/07B 53 43 10 0,191 10 Mezzo cilindro nichelato con pomolo - Nickel-plated half cylinder with knob CARATTERISTICHE COSTRUTTIVE: Corpo in ottone nichel satinato - Camma autolubrificante - Pomolo in ottone cromato. FUNZIONAMENTO: Rotazione del pomolo di 360°. PARTI IN DOTAZIONE: / VARIANTI A RICHIESTA: / in acciaio CONSTRUCTIVE FEATURES: Satin nickel-plated brass body - Steel cam - Chrome-plated brass knob. WORKING: Turn the knob 360°. PROVIDED WITH: / ON REQUEST: / COD. 40 LAB 144/03B H372710 0,15110 144/04B H403010 0,16110 144/05B H433310 0,17110 144/07B H534310 0,19110 Cilindri ovali (6 perni) Serie 2140 Oval cylinders (6 pins) 6 perni in acciaio inox 6 stainless steel pins Resistente al grimaldello Picklock resistant Chiave piatta reversibile con collo allungato Long neck reversible flat key Costruiti secondo i parametri della norma UNI EN 1303:2005 Durabilità: grado 6 (100.000 cicli) Sicurezza della chiave: grado 5 (oltre 30.000 combinazioni) Sistemistica: per 1 sistema MK (con alto livello di sicurezza) = 2.000 possibili cifrature Manufactured in accordance with parameters of standard UNI EN 1303:2005 Durability: grade 6 (100.000 cycles) Security of the key: grade 5 (over 30.000 combinations) Master keying potential: for 1 MK system (with high security level) = 2.000 possible combinations 41 Cilindri ovali (6 perni) Oval cylinders (6 pins) Doppio cilindro nichelato - Nickel-plated double cylinder CARATTERISTICHE COSTRUTTIVE: Corpo in ottone nichel satinato - Cilindretti in ottone nichelato - Perni in acciaio inox - Controperni in ottone - Molle in bronzo fosforoso Camma verticale in acciaio autolubrificante - Chiavi piatte reversibili in ottone nichelato con numero di codice. FUNZIONAMENTO: Rotazione della chiave di 360°. Le chiavi sono dipendenti e non possono azionare il cilindro se dall’altro lato é stata inserita e ruotata la chiave. PARTI IN DOTAZIONE: 3 chiavi. VARIANTI A RICHIESTA: Impianti speciali KA-MK-GMK-CL CONSTRUCTIVE FEATURES: Satin nickel-plated brass body - Nickel-plated brass plugs - Stainless steel pins - Brass drivers - Phosphor bronze springs - Steel vertical cam Nichel-plated brass reversible flat keys with code number. WORKING: Turn the key 360° - The keys are dependent and cannot operate on the cylinder if on the other side the key was inserted and turned. PROVIDED WITH: 3 keys. ON REQUEST: Special keying systems KA-MK-GMK-CL LAB MADE IN ITALY COD. 2140/04 H 603030 6 2040/06 0,221 10 2140/06 H 703535 6 2040/06 0,241 10 2140/08 H 804040 6 2040/06 0,271 10 2140/11 H 653035 6 2040/06 0,231 10 2140/14 H 703040 6 2040/06 0,241 10 Mezzo cilindro nichelato - Nickel-plated half cylinder CARATTERISTICHE COSTRUTTIVE: Corpo in ottone nichel satinato - Cilindretto in ottone nichelato - Perni in acciaio inox - Controperni in ottone - Molle in bronzo fosforoso Camma verticale in acciaio autolubrificante - Chiavi piatte reversibili in ottone nichelato con numero di codice. FUNZIONAMENTO: Rotazione della chiave di 360°. PARTI IN DOTAZIONE: 3 chiavi. VARIANTI A RICHIESTA: Impianti speciali KA-MK-GMK-CL CONSTRUCTIVE FEATURES: Satin nickel-plated brass body - Nickel-plated brass plug - Stainless steel pins - Brass drivers - Phosphor bronze springs - Steel vertical cam Nichel-plated brass reversible flat keys with code number.. WORKING: Turn the key 360°. PROVIDED WITH: 3 keys. ON REQUEST: Special keying systems KA-MK-GMK-CL LAB 2141/04 H 403010 6 42 MADE IN ITALY COD. 2040/06 0,141 10 Cilindri ovali (6 perni) Oval cylinders (6 pins) Doppio cilindro nichelato con pomolo - Nickel-plated double cylinder with knob CARATTERISTICHE COSTRUTTIVE: Corpo in ottone nichel satinato - Cilindretto in ottone nichelato - Perni in acciaio inox - Controperni in ottone - Molle in bronzo fosforoso Camma verticale in acciaio autolubrificante - Pomolo in ottone cromato - Chiavi piatte reversibili in ottone nichelato con numero di codice. FUNZIONAMENTO: Rotazione della chiave o del pomolo di 360°. PARTI IN DOTAZIONE: 3 chiavi. VARIANTI A RICHIESTA: Impianti speciali KA-MK-GMK-CL CONSTRUCTIVE FEATURES: Satin nickel-plated brass body - Nickel-plated brass plug - Stainless steel pins - Brass drivers - Phosphor bronze springs - Steel vertical cam Chrome-plated brass knob - Nichel-plated brass reversible flat keys with code number. WORKING: Turn the key or knob 360°. PROVIDED WITH: 3 keys. ON REQUEST: Special keying systems KA-MK-GMK-CL LAB MADE IN ITALY COD. 2143/04 H 603030 6 2040/06 0,311 5 2143/07 H 703535 6 2040/06 0,331 5 2143/13 H 653035 6 2040/06 0,321 5 2143/20 H 653530 6 2040/06 0,321 5 Doppio cilindro nichelato - Nickel-plated double cylinder CARATTERISTICHE COSTRUTTIVE: Corpo in ottone nichel satinato - Cilindretti in ottone nichelato - Perni in acciaio inox - Controperni in ottone - Molle in bronzo fosforoso Camma verticale in acciaio autolubrificante - Chiavi piatte reversibili in ottone nichelato con numero di codice. FUNZIONAMENTO: Rotazione della chiave di 360°. Le chiavi sono dipendenti e non possono azionare il cilindro se dall’altro lato é stata inserita e ruotata la chiave. PARTI IN DOTAZIONE: 5 chiavi, vite di fissaggio, carta di proprietà. VARIANTI A RICHIESTA: Impianti speciali KA-MK-GMK-CL. CONSTRUCTIVE FEATURES: Satin nickel-plated brass body - Nickel-plated brass plugs - Stainless steel pins - Brass drivers - Phosphor bronze springs - Steel vertical cam Nichel-plated brass reversible flat keys with code number. WORKING: Turn the key 360° - The keys are dependent and cannot operate on the cylinder if on the other side the key was inserted and turned. PROVIDED WITH: 5 keys, fixing screw, registration card. ON REQUEST: Special keying systems KA-MK-GMK-CL. LAB MADE IN ITALY COD. 2140/504 H603030 6 2040/06 0,25110 2140/506 H703535 6 2040/06 0,27110 2140/508 H804040 6 2040/06 0,30110 2140/511 H653035 6 2040/06 0,26110 2140/514 H703040 6 2040/06 0,27110 43 Cilindri ovali (6 perni) Oval cylinders (6 pins) Mezzo cilindro nichelato - Nickel-plated half cylinder CARATTERISTICHE COSTRUTTIVE: Corpo in ottone nichel satinato - Cilindretto in ottone nichelato - Perni in acciaio inox - Controperni in ottone - Molle in bronzo fosforoso Camma verticale in acciaio autolubrificante - Chiavi piatte reversibili in ottone nichelato con numero di codice. FUNZIONAMENTO: Rotazione della chiave di 360°. PARTI IN DOTAZIONE: 5 chiavi, vite di fissaggio, carta di proprietà. VARIANTI A RICHIESTA: Impianti speciali KA-MK-GMK-CL. CONSTRUCTIVE FEATURES: Satin nickel-plated brass body - Nickel-plated brass plug - Stainless steel pins - Brass drivers - Phosphor bronze springs - Steel vertical cam Nichel-plated brass reversible flat keys with code number. WORKING: Turn the key 360°. PROVIDED WITH: 5 keys, fixing screw, registration card. ON REQUEST: Special keying systems KA-MK-GMK-CL. LAB MADE IN ITALY COD. 2141/504 H403010 6 2040/06 0,171 10 Doppio cilindro nichelato con pomolo - Nickel-plated double cylinder with knob CARATTERISTICHE COSTRUTTIVE: Corpo in ottone nichel satinato - Cilindretto in ottone nichelato - Perni in acciaio inox - Controperni in ottone - Molle in bronzo fosforoso Camma verticale in acciaio autolubrificante - Pomolo in ottone cromato - Chiavi piatte reversibili in ottone nichelato con numero di codice. FUNZIONAMENTO: Rotazione della chiave o del pomolo di 360°. PARTI IN DOTAZIONE: 5 chiavi, vite di fissaggio, carta di proprietà. VARIANTI A RICHIESTA: Impianti speciali KA-MK-GMK-CL. CONSTRUCTIVE FEATURES: Satin nickel-plated brass body - Nickel-plated brass plug - Stainless steel pins - Brass drivers - Phosphor bronze springs - Steel vertical cam Chrome-plated brass knob - Nichel-plated brass reversible flat keys with code number. WORKING: Turn the key or knob 360°. PROVIDED WITH: 5 keys, fixing screw, registration card. ON REQUEST: Special keying systems KA-MK-GMK-CL. 2143/504 H603030 6 2040/06 0,341 5 2143/507 H703535 6 2040/06 0,361 5 2143/513 H653035 6 2040/06 0,351 5 2143/520 H653530 6 2040/06 0,351 5 44 LAB MADE IN ITALY COD. Cilindri ovali (9 perni) Serie 2240 Oval cylinders (9 pins) Carta di proprietà Registration card 9 perni in acciaio inox 9 stainless steel pins Chiave piatta reversibile con collo allungato Long neck reversible flat key Resistente allo strappo Tear resistant Resistente al grimaldello Picklock resistant Resistente al trapano Drill resistant Costruiti secondo i parametri della norma UNI EN 1303:2005 Durabilità: grado 6 (100.000 cicli) Sicurezza della chiave: grado 6 (oltre 300.000 combinazioni) Sistemistica: per 1 sistema MK (con alto livello di sicurezza) = 20.000 possibili cifrature Manufactured in accordance with parameters of standard UNI EN 1303:2005 Durability: grade 6 (100.000 cycles) Security of the key: grade 6 (over 300.000 combinations) Master keying potential: for 1 MK system (with high security level) = 20.000 possible combinations 45 Cilindri ovali (9 perni) Oval cylinders (9 pins) Doppio cilindro nichelato - Nickel-plated double cylinder CARATTERISTICHE COSTRUTTIVE: Corpo in ottone nichel satinato con spine antitrapano e inserto antistrappo - Cilindretti in ottone nichelato con sfere antitrapano - Perni in acciaio inox - Controperni in ottone - Molle in bronzo fosforoso - Camma verticale in acciaio autolubrificante - Chiavi piatte reversibili in ottone nichelato con numero di codice. FUNZIONAMENTO: Rotazione della chiave di 360°. Le chiavi sono dipendenti e non possono azionare il cilindro se dall’altro lato é stata inserita e ruotata la chiave. PARTI IN DOTAZIONE: 5 chiavi, 5 cover blu, vite di fissaggio, carta di proprietà. VARIANTI A RICHIESTA: Impianti speciali KA-MK-GMK-CL CONSTRUCTIVE FEATURES: Satin nickel-plated brass body with steel drill resistant pins and tear resistant insert - Nickel-plated brass plugs with steel drill resistant balls - Stainless steel pins - Brass drivers - Phosphor bronze springs - Steel vertical cam Nickel-plated brass reversible flat keys with code number. WORKING: Turn the key 360°. The keys are dependent and cannot operate on the cylinder if on the other side the key was inserted and turned. PROVIDED WITH: 5 keys, 5 blue key covers, fixing screw, registration card. ON REQUEST: Special keying systems KA-MK-GMK-CL LAB MADE IN ITALY COD. 2240/504 H603030 9 2040/06 0,271 5 2240/506 H703535 9 2040/06 0,291 5 2240/508 H804040 9 2040/06 0,321 5 2240/511 H653035 9 2040/06 0,281 5 2240/514 H703040 9 2040/06 0,291 5 Mezzo cilindro nichelato - Nickel-plated half cylinder CARATTERISTICHE COSTRUTTIVE: Corpo in ottone nichel satinato con spina antitrapano - Cilindretto in ottone nichelato con sfere antitrapano - Perni in acciaio inox - Controperni in ottone - Molle in bronzo fosforoso - Camma verticale in acciaio autolubrificante - Chiavi piatte reversibili in ottone nichelato con numero di codice. FUNZIONAMENTO: Rotazione della chiave di 360°. PARTI IN DOTAZIONE: 5 chiavi, 5 cover blu, vite di fissaggio, carta di proprietà. VARIANTI A RICHIESTA: Impianti speciali KA-MK-GMK-CL CONSTRUCTIVE FEATURES: Satin nickel-plated brass body with steel drill resistant pin - Nickel-plated brass plug with steel drill resistant balls - Stainless steel pins - Brass drivers - Phosphor bronze springs - Steel vertical cam - Nickel-plated brass reversible flat keys with code number. WORKING: Turn the key 360°. PROVIDED WITH: 5 keys, 5 blue key covers, fixing screw, registration card. ON REQUEST: Special keying systems KA-MK-GMK-CL LAB 2241/504 H403010 9 46 MADE IN ITALY COD. 2040/06 0,191 5 Cilindri ovali (9 perni) Oval cylinders (9 pins) Doppio cilindro nichelato con pomolo - Nickel-plated double cylinder with knob CARATTERISTICHE COSTRUTTIVE: Corpo in ottone nichel satinato con spina antitrapano e inserto antistrappo - Cilindretto in ottone nichelato con sfere antitrapano - Perni in acciaio inox - Controperni in ottone - Molle in bronzo fosforoso - Camma verticale in acciaio autolubrificante - Pomolo in ottone cromato - Chiavi piatte reversibili in ottone nichelato con numero di codice. FUNZIONAMENTO: Rotazione della chiave o del pomolo di 360°. PARTI IN DOTAZIONE: 5 chiavi, 5 cover blu, vite di fissaggio, carta di proprietà. VARIANTI A RICHIESTA: Impianti speciali KA-MK-GMK-CL CONSTRUCTIVE FEATURES: Satin nickel-plated brass body with steel drill resistant pin and tear resistant insert - Nickel-plated brass plug with steel drill resistant balls - Stainless steel pins - Brass drivers - Phosphor bronze springs - Steel vertical cam Chrome-plated brass knob - Nickel-plated brass reversible flat keys with code number. WORKING: Turn the key or knob 360°. PROVIDED WITH: 5 keys, 5 blue key covers, fixing screw, registration card. ON REQUEST: Special keying systems KA-MK-GMK-CL LAB MADE IN ITALY COD. 2243/504 H60 30 30 9 2040/06 0,361 5 2243/507 H70 35 35 9 2040/06 0,381 5 2243/513 H65 30 35 9 2040/06 0,371 5 2243/520 H65 35 30 9 2040/06 0,371 5 47 Cilindri sagomati (5 perni) Serie 120 Profile cylinders (5 pins) 5 perni (escluso cod. 120/02) 5 pins (except cod. 120/02) Resistente alla spinta Push resistant Resistente al grimaldello Picklock resistant Costruiti secondo i parametri della norma UNI EN 1303:2005 Durabilità: grado 6 (100.000 cicli) Sicurezza della chiave: grado 2 (oltre 5.000 combinazioni) Sistemistica: per 1 sistema MK (con alto livello di sicurezza) = 500 possibili cifrature (escluso cod. 120/02) Manufactured in accordance with parameters of standard UNI EN 1303:2005 Durability: grade 6 (100.000 cycles) Security of the key: grade 2 (over 5.000 combinations) Master keying potential: for 1 MK system (with high security level) = 500 possible combinations (except cod. 120/02) 48 Cilindri sagomati (5 perni) Profile cylinders (5 pins) Doppio cilindro - Double cylinder CARATTERISTICHE COSTRUTTIVE: Corpo in ottone - Cilindretti in ottone - Perni e controperni in ottone - Molle in bronzo fosforoso - Camma DIN disassata di 30° in acciaio autolubrificante - Chiavi in ottone nichelato. FUNZIONAMENTO: Rotazione della chiave di 360° - Le chiavi sono dipendenti e non possono azionare il cilindro se dall’altro lato é stata inserita e ruotata la chiave. PARTI IN DOTAZIONE: 3 chiavi. VARIANTI A RICHIESTA: Impianti speciali KA-MK-GMK-CL. CONSTRUCTIVE FEATURES: Brass body - Brass plugs - Brass pins - Phosphor bronze springs - Steel off center 30° DIN cam - Nichel-plated brass keys. WORKING: Turn the key 360° - The keys are dependent and cannot operate on the cylinder if on the other side the key was inserted and turned. PROVIDED WITH: 3 keys. ON REQUEST: Special keying systems KA-MK-GMK-CL. COD. LAB 120/01 402020 3 105/03 0,15110 120/02 47 23,523,5 4 105/04 0,17 1 10 120/03 542727 5 105/05 0,18110 120/04 603030 5 105/05 0,20110 120/05 602733 5 105/05 0,20110 120/06 703535 5 105/05 0,23110 120/07 702743 5 105/05 0,23110 120/08 804040 5 105/05 0,26110 120/09 802753 5 105/05 0,26110 120/10 642737 5 105/05 0,21110 120/11 653035 5 105/05 0,21110 120/12 964353 5 105/05 0,311 5 120/13 10653 53 5 105/05 0,341 5 120/14 703040 5 105/05 0,23110 120/15 753045 5 105/05 0,24110 120/16 753540 5 105/05 0,24110 120/17 803545 5 105/05 0,26110 120/18 803050 5 105/05 0,26110 120/19 854045 5 105/05 0,27110 120/20 904050 5 105/05 0,291 5 120/21 904545 5 105/05 0,291 5 120/2210050 50 5 105/05 0,321 5 120/23 853055 5 105/05 0,27110 120/24 903060 5 105/05 0,291 5 120/25 953065 5 105/05 0,301 5 120/26 10030 70 5 105/05 0,321 5 120/27 11030 80 5 105/05 0,351 5 120/28 853550 5 105/05 0,27110 120/29 903555 5 105/05 0,291 5 120/30 953560 5 105/05 0,301 5 120/31 10035 65 5 105/05 0,321 5 120/32 954055 5 105/05 0,301 5 120/33 10040 60 5 105/05 0,321 5 120/34 11040 70 5 105/05 0,351 5 120/35 12040 80 5 105/05 0,381 5 120/36 954550 5 105/05 0,301 5 120/37 10045 55 5 105/05 0,321 5 120/38 11050 60 5 105/05 0,351 5 120/39 12060 60 5 105/05 0,381 5 49 Cilindri sagomati (5 perni) Profile cylinders (5 pins) Doppio cilindro nichelato - Nickel-plated double cylinder CARATTERISTICHE COSTRUTTIVE: Corpo in ottone nichel satinato - Cilindretti in ottone nichelato - Perni e controperni in ottone - Molle in bronzo fosforoso - Camma DIN disassata di 30° in acciaio autolubrificante - Chiavi in ottone nichelato. FUNZIONAMENTO: Rotazione della chiave di 360° - Le chiavi sono dipendenti e non possono azionare il cilindro se dall’altro lato é stata inserita e ruotata la chiave. PARTI IN DOTAZIONE: 3 chiavi. VARIANTI A RICHIESTA: Impianti speciali KA-MK-GMK-CL. CONSTRUCTIVE FEATURES: Satin nickel-plated brass body - Nickel-plated brass plugs - Brass pins - Phosphor bronze springs - Steel off center 30° DIN cam - Nichel-plated brass keys. WORKING: Turn the key 360° - The keys are dependent and cannot operate on the cylinder if on the other side the key was inserted and turned. PROVIDED WITH: 3 keys. ON REQUEST: Special keying systems KA-MK-GMK-CL. COD. 50 LAB 120/01 H 402020 3 105/03 0,15110 120/02 H 105/04 0,17 1 10 120/03 H 542727 5 105/05 0,18110 120/04 H 603030 5 105/05 0,20110 120/05 H 602733 5 105/05 0,20110 120/06 H 703535 5 105/05 0,23110 47 23,523,5 4 120/07 H 702743 5 105/05 0,23110 120/08 H 804040 5 105/05 0,26110 120/09 H 802753 5 105/05 0,26110 120/10 H 642737 5 105/05 0,21110 120/11 H 653035 5 105/05 0,21110 120/12 H 964353 5 105/05 0,311 5 120/13 H 10653 53 5 105/05 0,341 5 120/14 H 703040 5 105/05 0,23110 120/15 H 753045 5 105/05 0,24110 120/16 H 753540 5 105/05 0,24110 120/17 H 803545 5 105/05 0,26110 120/18 H 803050 5 105/05 0,26110 120/19 H 854045 5 105/05 0,27110 120/20 H 904050 5 105/05 0,291 5 120/21 H 105/05 0,291 5 120/22 H10050 50 5 105/05 0,321 5 120/23 H853055 5 105/05 0,27110 120/24 H903060 5 105/05 0,291 5 120/25 H953065 5 105/05 0,301 5 120/26 H10030 70 5 105/05 0,321 5 120/27 H11030 80 5 105/05 0,351 5 120/28 H853550 5 105/05 0,27110 120/29 H903555 5 105/05 0,291 5 120/30 H953560 5 105/05 0,301 5 120/31 H10035 65 5 105/05 0,321 5 120/32 H954055 5 105/05 0,301 5 120/33 H10040 60 5 105/05 0,321 5 120/34 H11040 70 5 105/05 0,351 5 120/35 H12040 80 5 105/05 0,381 5 120/36 H954550 5 105/05 0,301 5 120/37 H 904545 5 10045 55 5 105/05 0,321 5 120/38 H11050 60 5 105/05 0,351 5 120/39 H12060 60 5 105/05 0,381 5 Cilindri sagomati (5 perni) Profile cylinders (5 pins) Mezzo cilindro - Half cylinder CARATTERISTICHE COSTRUTTIVE: Corpo in ottone - Cilindretto in ottone - Perni e controperni in ottone - Molle in bronzo fosforoso - Camma DIN disassata di 30° in acciaio autolubrificante - Chiavi in ottone nichelato. FUNZIONAMENTO: Rotazione della chiave di 360°. PARTI IN DOTAZIONE: 3 chiavi. VARIANTI A RICHIESTA: Impianti speciali KA-MK-GMK-CL. CONSTRUCTIVE FEATURES: Brass body - Brass plug - Brass pins - Phosphor bronze springs - Steel off center 30° DIN cam - Nichel-plated brass keys. WORKING: Turn the key 360°. PROVIDED WITH: 3 keys. ON REQUEST: Special keying systems KA-MK-GMK-CL. COD. 121/01 121/02 LAB 302010 3 33,523,5 10 4 105/03 0,11110 105/04 0,12 1 10 121/03 372710 5 105/05 0,131 10 121/04 403010 5 105/05 0,141 10 121/05 433310 5 105/05 0,151 10 121/07 534310 5 105/05 0,171 10 121/12 978710 5 105/05 0,291 5 121/13 10797 10 5 105/05 0,311 5 121/24 706010 5 105/05 0,221 10 121/26 807010 5 105/05 0,241 10 Mezzo cilindro nichelato - Nickel-plated half cylinder CARATTERISTICHE COSTRUTTIVE: Corpo in ottone nichel satinato - Cilindretto in ottone nichelato - Perni e controperni in ottone - Molle in bronzo fosforoso - Camma DIN disassata di 30° in acciaio autolubrificante - Chiavi in ottone nichelato. FUNZIONAMENTO: Rotazione della chiave di 360°. PARTI IN DOTAZIONE: 3 chiavi. VARIANTI A RICHIESTA: Impianti speciali KA-MK-GMK-CL. CONSTRUCTIVE FEATURES: Satin nickel-plated brass body - Nickel-plated brass plug Brass pins - Phosphor bronze springs - Steel off center 30° DIN cam - Nichel-plated brass keys. WORKING: Turn the key 360°. PROVIDED WITH: 3 keys. ON REQUEST: Special keying systems KA-MK-GMK-CL. COD. LAB 121/01 H 302010 3 105/03 0,11110 121/02 H 105/04 0,12 1 10 121/03 H 372710 5 33,523,5 10 4 105/05 0,13110 121/04 H 403010 5 105/05 0,14110 121/05 H 433310 5 105/05 0,15110 121/07 H 534310 5 105/05 0,17110 121/12 H 978710 5 105/05 0,291 5 121/13 H 10797 10 5 105/05 0,311 5 121/24 H 706010 5 105/05 0,22110 121/26 H 807010 5 105/05 0,24110 51 Cilindri sagomati (5 perni) Profile cylinders (5 pins) Doppio cilindro con pomolo - Double cylinder with knob CARATTERISTICHE COSTRUTTIVE: Corpo in ottone - Cilindretto in ottone - Perni e controperni in ottone - Molle in bronzo fosforoso - Camma DIN disassata di 30° in acciaio autolubrificante - Pomolo in nylon nero - Chiavi in ottone nichelato. FUNZIONAMENTO: Rotazione della chiave o del pomolo di 360°. PARTI IN DOTAZIONE: 3 chiavi. VARIANTI A RICHIESTA: Impianti speciali KA-MK-GMK-CL. CONSTRUCTIVE FEATURES: Brass body - Brass plug - Brass pins - Phosphor bronze springs - Steel off center 30° DIN cam - Black nylon knob - Nichel-plated brass keys. WORKING: Turn the key or knob 360°. PROVIDED WITH: 3 keys. ON REQUEST: Special keying systems KA-MK-GMK-CL. COD. LAB 123/03 54 27 27 5 105/05 0,211 10 123/04 60 30 30 5 105/05 0,221 5 123/05 60 27 33 5 105/05 0,221 5 123/06 60 33 27 5 105/05 0,231 5 123/07 70 35 35 5 105/05 0,251 5 123/08 70 27 43 5 105/05 0,251 5 123/09 70 43 27 5 105/05 0,261 5 123/10 80 40 40 5 105/05 0,281 5 123/11 80 27 53 5 105/05 0,281 5 123/12 80 53 27 5 105/05 0,281 5 Doppio cilindro nichelato con pomolo - Nickel-plated double cylinder with knob CARATTERISTICHE COSTRUTTIVE: Corpo in ottone nichel satinato - Cilindretto in ottone nichelato - Perni e controperni in ottone - Molle in bronzo fosforoso - Camma DIN disassata di 30° in acciaio autolubrificante - Pomolo in nylon nero - Chiavi in ottone nichelato. FUNZIONAMENTO: Rotazione della chiave o del pomolo di 360°. PARTI IN DOTAZIONE: 3 chiavi. VARIANTI A RICHIESTA: Impianti speciali KA-MK-GMK-CL. CONSTRUCTIVE FEATURES: Satin nickel-plated brass body - Nickel-plated brass plug Brass pins - Phosphor bronze springs - Steel off center 30° DIN cam - Black nylon knob - Nichel-plated brass keys. WORKING: Turn the key or knob 360°. PROVIDED WITH: 3 keys. ON REQUEST: Special keying systems KA-MK-GMK-CL. COD. 52 LAB 123/03 H 54 27 27 5 105/05 0,211 10 123/04 H 60 30 30 5 105/05 0,221 5 123/05 H 60 27 33 5 105/05 0,221 5 123/06 H 60 33 27 5 105/05 0,231 5 123/07 H 70 35 35 5 105/05 0,251 5 123/08 H 70 27 43 5 105/05 0,251 5 123/09 H 70 43 27 5 105/05 0,261 5 123/10 H 80 40 40 5 105/05 0,281 5 123/11 H 80 27 53 5 105/05 0,281 5 123/12 H 80 53 27 5 105/05 0,281 5 Cilindri sagomati (5 perni) Profile cylinders (5 pins) Doppio cilindro con pomolo - Double cylinder with knob CARATTERISTICHE COSTRUTTIVE: Corpo in ottone - Cilindretto in ottone - Perni e controperni in ottone - Molle in bronzo fosforoso - Camma DIN disassata di 30° in acciaio autolubrificante - Pomolo in ottone lucido verniciato - Chiavi in ottone nichelato. FUNZIONAMENTO: Rotazione della chiave o del pomolo di 360°. PARTI IN DOTAZIONE: 3 chiavi. VARIANTI A RICHIESTA: Impianti speciali KA-MK-GMK-CL. CONSTRUCTIVE FEATURES: Brass body - Brass plug - Brass pins - Phosphor bronze springs - Steel off center 30° DIN cam - Brass knob - Nichel-plated brass keys. WORKING: Turn the key or knob 360°. PROVIDED WITH: 3 keys. ON REQUEST: Special keying systems KA-MK-GMK-CL. COD. LAB 123/03B 54 27 27 5 105/05 0,251 10 123/04B 60 30 30 5 105/05 0,261 5 123/05B 60 27 33 5 105/05 0,261 5 123/06B 60 33 27 5 105/05 0,261 5 123/07B 70 35 35 5 105/05 0,291 5 123/08B 70 27 43 5 105/05 0,291 5 123/09B 70 43 27 5 105/05 0,291 5 123/10B 80 40 40 5 105/05 0,321 5 123/11B 80 27 53 5 105/05 0,321 5 123/12B 80 53 27 5 105/05 0,321 5 Doppio cilindro nichelato con pomolo - Nickel-plated double cylinder with knob CARATTERISTICHE COSTRUTTIVE: Corpo in ottone nichel satinato - Cilindretto in ottone nichelato - Perni e controperni in ottone - Molle in bronzo fosforoso - Camma DIN disassata di 30° in acciaio autolubrificante - Pomolo in ottone cromato - Chiavi in ottone nichelato. FUNZIONAMENTO: Rotazione della chiave o del pomolo di 360°. PARTI IN DOTAZIONE: 3 chiavi. VARIANTI A RICHIESTA: Impianti speciali KA-MK-GMK-CL. CONSTRUCTIVE FEATURES: Satin nickel-plated brass body - Nickel-plated brass plug Brass pins - Phosphor bronze springs - Steel off center 30° DIN cam - Chrome-plated brass knob - Nichel-plated brass keys. WORKING: Turn the key or knob 360°. PROVIDED WITH: 3 keys. ON REQUEST: Special keying systems KA-MK-GMK-CL. COD. LAB 123/03B H 54 27 27 5 105/05 0,251 10 123/04B H 60 30 30 5 105/05 0,261 5 123/05B H 60 27 33 5 105/05 0,261 5 123/06B H 60 33 27 5 105/05 0,261 5 123/07B H 70 35 35 5 105/05 0,291 5 123/08B H 70 27 43 5 105/05 0,291 5 123/09B H 70 43 27 5 105/05 0,291 5 123/10B H 80 40 40 5 105/05 0,321 5 123/11B H 80 27 53 5 105/05 0,321 5 123/12B H 80 53 27 5 105/05 0,321 5 53 Cilindri sagomati Profile cylinders Mezzo cilindro con pomolo - Half cylinder with knob CARATTERISTICHE COSTRUTTIVE: Corpo in ottone - Camma DIN disassata di 30° in acciaio autolubrificante - Pomolo in nylon nero. FUNZIONAMENTO: Rotazione del pomolo di 360°. PARTI IN DOTAZIONE: / VARIANTI A RICHIESTA: / CONSTRUCTIVE FEATURES: Brass body - Steel off center 30° DIN cam - Black nylon knob. WORKING: Turn the knob 360°. PROVIDED WITH: / ON REQUEST: / COD. LAB 124/03 37 27 10 0,121 10 124/04 40 30 10 0,131 10 124/05 43 33 10 0,141 10 124/07 53 43 10 0,161 10 Mezzo cilindro nichelato con pomolo - Nickel-plated half cylinder with knob CARATTERISTICHE COSTRUTTIVE: Corpo in ottone nichel satinato - Camma DIN disassata di 30° in acciaio autolubrificante - Pomolo in nylon nero. FUNZIONAMENTO: Rotazione del pomolo di 360°. PARTI IN DOTAZIONE: / VARIANTI A RICHIESTA: / CONSTRUCTIVE FEATURES: Satin nickel-plated brass body - Steel off center 30° DIN cam - Black nylon knob. WORKING: Turn the knob 360°. PROVIDED WITH: / ON REQUEST: / 54 COD. LAB 124/03 H 37 27 10 0,121 10 124/04 H 40 30 10 0,131 10 124/05 H 43 33 10 0,141 10 124/07 H 53 43 10 0,161 10 Cilindri sagomati Profile cylinders Mezzo cilindro con pomolo - Half cylinder with knob CARATTERISTICHE COSTRUTTIVE: Corpo in ottone - Camma DIN disassata di 30° in acciaio autolubrificante - Pomolo in ottone lucido verniciato. FUNZIONAMENTO: Rotazione del pomolo di 360°. PARTI IN DOTAZIONE: / VARIANTI A RICHIESTA: / CONSTRUCTIVE FEATURES: Brass body - Steel off center 30° DIN cam - Brass knob. WORKING: Turn the knob 360°. PROVIDED WITH: / ON REQUEST: / COD. LAB 124/03B 37 27 10 0,161 10 124/04B 40 30 10 0,171 10 124/05B 43 33 10 0,181 10 124/07B 53 43 10 0,201 10 Mezzo cilindro nichelato con pomolo - Nickel-plated half cylinder with knob CARATTERISTICHE COSTRUTTIVE: Corpo in ottone nichel satinato - Camma DIN disassata di 30° in acciaio autolubrificante - Pomolo in ottone cromato. FUNZIONAMENTO: Rotazione del pomolo di 360°. PARTI IN DOTAZIONE: / VARIANTI A RICHIESTA: / CONSTRUCTIVE FEATURES: Satin nickel-plated brass body - Steel off center 30° DIN cam - Chrome-plated brass knob. WORKING: Turn the knob 360°. PROVIDED WITH: / ON REQUEST: / COD. LAB 124/03B H 37 27 10 0,161 10 124/04B H 40 30 10 0,171 10 124/05B H 43 33 10 0,181 10 124/07B H 53 43 10 0,201 10 55 Cilindri sagomati Profile cylinders Doppio cilindro per porte da bagno - Double cylinder for toilet doors CARATTERISTICHE COSTRUTTIVE: Corpo in ottone - Cilindretto in ottone - Camma DIN disassata di 30° in acciaio autolubrificante - Pomolo in nylon nero. FUNZIONAMENTO: Rotazione del cilindretto o del pomolo di 360°. PARTI IN DOTAZIONE: / VARIANTI A RICHIESTA: / CONSTRUCTIVE FEATURES: Brass body - Brass plug - Steel off center 30° DIN cam Black nylon knob. WORKING: Turn the plug or knob 360°. PROVIDED WITH: / ON REQUEST: / COD. LAB 125/03 54 27 27 0,211 10 125/04 60 30 30 0,221 5 125/05 60 27 33 0,221 5 125/07 70 35 35 0,251 5 Doppio cilindro nichelato per porte da bagno - Nickel-plated double cylinder for toilet doors CARATTERISTICHE COSTRUTTIVE: Corpo in ottone nichel satinato - Cilindretto in ottone nichelato - Camma DIN disassata di 30° in acciaio autolubrificante - Pomolo in nylon nero. FUNZIONAMENTO: Rotazione del cilindretto o del pomolo di 360°. PARTI IN DOTAZIONE: / VARIANTI A RICHIESTA: / CONSTRUCTIVE FEATURES: Satin nickel-plated brass body - Nickel-plated brass plug Steel off center 30° DIN cam - Black nylon knob. WORKING: Turn the plug or knob 360°. PROVIDED WITH: / ON REQUEST: / COD. 56 LAB 125/03 H 542727 0,211 10 125/04 H 603030 0,221 5 125/05 H 60 27 33 0,221 5 125/07 H 70 35 35 0,251 5 Cilindri sagomati Profile cylinders Doppio cilindro per porte da bagno - Double cylinder for toilet doors CARATTERISTICHE COSTRUTTIVE: Corpo in ottone - Cilindretto in ottone - Camma DIN disassata di 30° in acciaio autolubrificante - Pomolo in ottone lucido verniciato. FUNZIONAMENTO: Rotazione del cilindretto o del pomolo di 360°. PARTI IN DOTAZIONE: / VARIANTI A RICHIESTA: / CONSTRUCTIVE FEATURES: Brass body - Brass plug - Steel off center 30° DIN cam Brass knob. WORKING: Turn the plug or knob 360°. PROVIDED WITH: / ON REQUEST: / COD. LAB 125/03B 54 27 27 0,251 10 125/04B 60 30 30 0,261 5 125/05B 60 27 33 0,261 5 125/07B 70 35 35 0,291 5 Doppio cilindro nichelato per porte da bagno - Nickel-plated double cylinder for toilet doors CARATTERISTICHE COSTRUTTIVE: Corpo in ottone nichel satinato - Cilindretto in ottone nichelato - Camma DIN disassata di 30° in acciaio autolubrificante - Pomolo in ottone cromato. FUNZIONAMENTO: Rotazione del cilindretto o del pomolo di 360°. PARTI IN DOTAZIONE: / VARIANTI A RICHIESTA: / CONSTRUCTIVE FEATURES: Satin nickel-plated brass body - Nickel-plated brass plug Steel off center 30° DIN cam - Chrome-plated brass knob. WORKING: Turn the plug or knob 360°. PROVIDED WITH: / ON REQUEST: / COD. LAB 125/03B H 54 27 27 0,251 10 125/04B H 60 30 30 0,261 5 125/05B H 60 27 33 0,261 5 125/07B H 70 35 35 0,291 5 57 Cilindri sagomati (6 perni) Serie 2120 Profile cylinders (6 pins) 6 perni in acciaio inox 6 stainless steel pins Chiave piatta reversibile con collo allungato Long neck reversible flat key Resistente alla spinta Push resistant Resistente al grimaldello Picklock resistant Costruiti secondo i parametri della norma UNI EN 1303:2005 Durabilità: grado 6 (100.000 cicli) Sicurezza della chiave: grado 5 (oltre 30.000 combinazioni) Sistemistica: per 1 sistema MK (con alto livello di sicurezza) = 2.000 possibili cifrature Manufactured in accordance with parameters of standard UNI EN 1303:2005 Durability: grade 6 (100.000 cycles) Security of the key: grade 5 (over 30.000 combinations) Master keying potential: for 1 MK system (with high security level) = 2.000 possible combinations 58 Cilindri sagomati (6 perni) Profile cylinders (6 pins) Doppio cilindro nichelato - Nickel-plated double cylinder CARATTERISTICHE COSTRUTTIVE: Corpo in ottone nichel satinato - Cilindretti in ottone nichelato - Perni in acciaio inox - Controperni in ottone - Molle in bronzo fosforoso Camma DIN disassata di 30° in acciaio autolubrificante - Chiavi piatte reversibili in ottone nichelato con numero di codice. FUNZIONAMENTO: Rotazione della chiave di 360° - Le chiavi sono dipendenti e non possono azionare il cilindro se dall’altro lato é stata inserita e ruotata la chiave. PARTI IN DOTAZIONE: 3 chiavi. VARIANTI A RICHIESTA: Impianti speciali KA-MK-GMK-CL. CONSTRUCTIVE FEATURES: Satin nickel-plated brass body - Nickel-plated brass plugs Stainless steel pins - Brass drivers - Phosphor bronze springs - Steel off center 30° DIN cam - Nichel-plated brass reversible flat keys with code number. WORKING: Turn the key 360° - The keys are dependent and cannot operate on the cylinder if on the other side the key was inserted and turned. PROVIDED WITH: 3 keys. ON REQUEST: Special keying systems KA-MK-GMK-CL. LAB MADE IN ITALY COD. 2120/04 H 603030 6 2020/06 0,261 10 2120/06 H 703535 6 2020/06 0,291 10 2120/08 H 804040 6 2020/06 0,321 10 2120/11 H 653035 6 2020/06 0,271 10 2120/14 H 703040 6 2020/06 0,291 10 2120/15 H 753045 6 2020/06 0,311 10 2120/16 H 753540 6 2020/06 0,311 10 2120/17 H 803545 6 2020/06 0,321 10 2120/18 H 803050 6 2020/06 0,321 10 2120/19 H 854045 6 2020/06 0,341 10 2120/20 H 904050 6 2020/06 0,361 5 2120/21 H 904545 6 2020/06 0,361 5 2120/22 H 10050 50 6 2020/06 0,391 5 2120/23 H 853055 6 2020/06 0,341 10 2120/24 H 903060 6 2020/06 0,361 5 2120/25 H 953065 6 2020/06 0,381 5 2120/26 H 10030 70 6 2020/06 0,391 5 2120/27 H 11030 80 6 2020/06 0,421 5 2120/28 H 853550 6 2020/06 0,341 10 2120/29 H 903555 6 2020/06 0,361 5 2120/30 H 953560 6 2020/06 0,381 5 2120/31 H 10035 65 6 2020/06 0,391 5 2120/32 H 954055 6 2020/06 0,381 5 2120/33 H 10040 60 6 2020/06 0,391 5 2120/34 H 11040 70 6 2020/06 0,421 5 2120/35 H 12040 80 6 2020/06 0,451 5 2120/36 H 954550 6 2020/06 0,381 5 2120/37 H 10045 55 6 2020/06 0,391 5 2120/38 H 11050 60 6 2020/06 0,421 5 2120/39 H 12060 60 6 2020/06 0,451 5 59 Cilindri sagomati (6 perni) Profile cylinders (6 pins) Doppio cilindro nichelato con chiave cantiere - Nickel-plated double cylinder with temporary key CARATTERISTICHE COSTRUTTIVE: Corpo in ottone nichel satinato - Cilindretti in ottone nichelato - Perni in acciaio inox - Controperni in ottone - Molle in bronzo fosforoso Camma DIN disassata di 30° in acciaio autolubrificante - Chiavi piatte reversibili in ottone nichelato con numero di codice. FUNZIONAMENTO: Rotazione della chiave di 360° - Le chiavi sono dipendenti e non possono azionare il cilindro se dall’altro lato é stata inserita e ruotata la chiave. PARTI IN DOTAZIONE: 3 chiavi, 1 chiave cantiere, 3 cover blu, 1 cover rossa, vite di fissaggio, carta di proprietà. VARIANTI A RICHIESTA: Impianti speciali KA. CONSTRUCTIVE FEATURES: Satin nickel-plated brass body - Nickel-plated brass plugs Stainless steel pins - Brass drivers - Phosphor bronze springs - Steel off center 30° DIN cam - Nichel-plated brass reversible flat keys with code number. WORKING: Turn the key 360° - The keys are dependent and cannot operate on the cylinder if on the other side the key was inserted and turned. PROVIDED WITH: 3 keys, 1 temporary key, 3 blue key covers, 1 red key cover, fixing screw, registration card. ON REQUEST: Special keying systems KA. 2120/04 H TK 60 30 30 6 2020/06 0,271 5 2120/06 H TK 70 35 35 6 2020/06 0,301 5 2120/08 H TK 80 40 40 6 2020/06 0,331 5 2120/11 H TK 65 30 35 6 2020/06 0,281 5 2120/14 H TK 70 30 40 6 2020/06 0,301 5 2120/15 H TK 75 30 45 6 2020/06 0,321 5 2120/16 H TK 75 35 40 6 2020/06 0,321 5 2120/17 H TK 80 35 45 6 2020/06 0,331 5 2120/18 H TK 80 30 50 6 2020/06 0,331 5 2120/19 H TK 85 40 45 6 2020/06 0,351 5 2120/20 H TK 90 40 50 6 2020/06 0,371 5 1 2120/21 H TK 90 45 45 6 2020/06 0,371 5 2120/22 H TK 10050 50 6 2020/06 0,401 5 Il cilindro funziona normalmente con la chiave cantiere (TK). 2120/23 H TK 85 30 55 6 2020/06 0,351 5 2120/24 H TK 90 30 60 6 2020/06 0,371 5 2120/25 H TK 95 30 65 6 2020/06 0,391 5 2120/26 H TK 10030 70 6 2020/06 0,401 5 2120/27 H TK 11030 80 6 2020/06 0,431 5 2120/28 H TK 85 35 50 6 2020/06 0,351 5 2120/29 H TK 90 35 55 6 2020/06 0,371 5 2120/30 H TK 95 35 60 6 2020/06 0,391 5 2120/31 H TK 10035 65 6 2020/06 0,401 5 2120/32 H TK 95 40 55 6 2020/06 0,391 5 2120/33 H TK 10040 60 6 2020/06 0,401 5 2120/34 H TK 11040 70 6 2020/06 0,431 5 2120/35 H TK 12040 80 6 2020/06 0,461 5 2120/36 H TK 95 45 50 6 2020/06 0,391 5 2120/37 H TK 10045 55 6 2020/06 0,401 5 2120/38 H TK 11050 60 6 2020/06 0,431 5 2120/39 H TK 2020/06 0,461 5 The cylinder normally works with the temporary key (TK). 2 Dopo l’inserimento e la rotazione della chiave proprietario, la chiave cantiere viene disattivata. The temporary key is disarmed after that the owner key is inserted and turned. 3 La chiave cantiere non apre più il cilindro. The temporary key doesn’t open the cylinder. 60 LAB MADE IN ITALY COD. 12060 60 6 Cilindri sagomati (6 perni) Profile cylinders (6 pins) Doppio cilindro nichelato - Nickel-plated double cylinder CARATTERISTICHE COSTRUTTIVE: Corpo in ottone nichel satinato - Cilindretti in ottone nichelato - Perni in acciaio inox - Controperni in ottone - Molle in bronzo fosforoso Camma DIN disassata di 30° in acciaio autolubrificante - Chiavi piatte reversibili in ottone nichelato con numero di codice. FUNZIONAMENTO: Rotazione della chiave di 360° - Le chiavi sono dipendenti e non possono azionare il cilindro se dall’altro lato é stata inserita e ruotata la chiave. PARTI IN DOTAZIONE: 5 chiavi, vite di fissaggio, carta di proprietà. VARIANTI A RICHIESTA: Impianti speciali KA-MK-GMK-CL. CONSTRUCTIVE FEATURES: Satin nickel-plated brass body - Nickel-plated brass plugs Stainless steel pins - Brass drivers - Phosphor bronze springs - Steel off center 30° DIN cam - Nichel-plated brass reversible flat keys with code number. WORKING: Turn the key 360° - The keys are dependent and cannot operate on the cylinder if on the other side the key was inserted and turned. PROVIDED WITH: 5 keys, fixing screw, registration card. ON REQUEST: Special keying systems KA-MK-GMK-CL. LAB MADE IN ITALY COD. 2120/504 H603030 6 2020/06 0,271 10 2120/506 H703535 6 2020/06 0,301 10 2120/508 H804040 6 2020/06 0,331 10 2120/511 H653035 6 2020/06 0,281 10 2120/514 H703040 6 2020/06 0,301 10 2120/515 H753045 6 2020/06 0,321 10 2120/516 H753540 6 2020/06 0,321 10 2120/517 H803545 6 2020/06 0,331 10 2120/518 H803050 6 2020/06 0,331 10 2120/519 H854045 6 2020/06 0,351 10 2120/520 H904050 6 2020/06 0,371 5 2120/521 H904545 6 2020/06 0,371 5 2120/522 H100 50 50 6 2020/06 0,40 1 2120/523 H853055 6 2020/06 0,351 10 2120/524 H903060 6 2020/06 0,371 5 2120/525 H953065 6 2020/06 0,391 5 2120/526 H100 30 70 6 2020/06 0,40 1 5 2120/527 H110 30 80 6 2020/06 0,43 1 5 2120/528 H853550 6 2020/06 0,351 10 2120/529 H903555 6 2020/06 0,371 5 2120/530 H953560 6 2020/06 0,391 5 2120/531 H100 35 65 6 2020/06 0,40 1 2120/532 H954055 6 2020/06 0,391 5 2120/533 H100 40 60 6 2020/06 0,40 1 5 5 5 2120/534 H110 40 70 6 2020/06 0,43 1 5 2120/535 H120 40 80 6 2020/06 0,46 1 2120/536 H954550 6 2020/06 0,391 5 2120/537 H100 45 55 6 2020/06 0,40 1 5 2120/538 H110 50 60 6 2020/06 0,43 1 5 2120/539 H120 60 60 6 2020/06 0,46 1 5 5 61 Cilindri sagomati (6 perni) Profile cylinders (6 pins) Doppio cilindro nichelato con chiave cantiere - Nickel-plated double cylinder with temporary key CARATTERISTICHE COSTRUTTIVE: Corpo in ottone nichel satinato - Cilindretti in ottone nichelato - Perni in acciaio inox - Controperni in ottone - Molle in bronzo fosforoso Camma DIN disassata di 30° in acciaio autolubrificante - Chiavi piatte reversibili in ottone nichelato con numero di codice. FUNZIONAMENTO: Rotazione della chiave di 360° - Le chiavi sono dipendenti e non possono azionare il cilindro se dall’altro lato é stata inserita e ruotata la chiave. PARTI IN DOTAZIONE: 5 chiavi, 1 chiave cantiere, 5 cover blu, 1 cover rossa, vite di fissaggio, carta di proprietà. VARIANTI A RICHIESTA: Impianti speciali KA. CONSTRUCTIVE FEATURES: Satin nickel-plated brass body - Nickel-plated brass plugs Stainless steel pins - Brass drivers - Phosphor bronze springs - Steel off center 30° DIN cam - Nichel-plated brass reversible flat keys with code number. WORKING: Turn the key 360° - The keys are dependent and cannot operate on the cylinder if on the other side the key was inserted and turned. PROVIDED WITH: 5 keys, 1 temporary key, 5 blue key covers, 1 red key cover, fixing screw, registration card. ON REQUEST: Special keying systems KA. 2120/504 H TK 60 30 30 6 2020/06 0,311 5 2120/506 H TK 70 35 35 6 2020/06 0,341 5 2120/508 H TK 80 40 40 6 2020/06 0,371 5 2120/511 H TK 65 30 35 6 2020/06 0,321 5 2120/514 H TK 70 30 40 6 2020/06 0,341 5 2120/515 H TK 75 30 45 6 2020/06 0,361 5 2120/516 H TK 75 35 40 6 2020/06 0,361 5 2120/517 H TK 80 35 45 6 2020/06 0,371 5 2120/518 H TK 80 30 50 6 2020/06 0,371 5 2120/519 H TK 85 40 45 6 2020/06 0,391 5 2120/520 H TK 90 40 50 6 2020/06 0,411 5 1 2120/521 H TK 90 45 45 6 2020/06 0,411 5 2120/522 H TK 10050 50 6 2020/06 0,441 5 Il cilindro funziona normalmente con la chiave cantiere (TK). 2120/523 H TK 85 30 55 6 2020/06 0,391 5 2120/524 H TK 90 30 60 6 2020/06 0,411 5 The cylinder normally works with the temporary key (TK). 2120/525 H TK 95 30 65 6 2020/06 0,431 5 2120/526 H TK 10030 70 6 2020/06 0,441 5 2120/527 H TK 11030 80 6 2020/06 0,471 5 2120/528 H TK 85 35 50 6 2020/06 0,391 5 2120/529 H TK 90 35 55 6 2020/06 0,411 5 2120/530 H TK 95 35 60 6 2020/06 0,431 5 2120/531 H TK 10035 65 6 2020/06 0,441 5 2120/532 H TK 95 40 55 6 2020/06 0,431 5 2120/533 H TK 10040 60 6 2020/06 0,441 5 2120/534 H TK 11040 70 6 2020/06 0,471 5 2120/535 H TK 12040 80 6 2020/06 0,501 5 2120/536 H TK 95 45 50 6 2020/06 0,431 5 2120/537 H TK 10045 55 6 2020/06 0,441 5 2120/538 H TK 11050 60 6 2020/06 0,471 5 2120/539 H TK 2020/06 0,501 5 2 Dopo l’inserimento e la rotazione della chiave proprietario, la chiave cantiere viene disattivata. The temporary key is disarmed after that the owner key is inserted and turned. 3 La chiave cantiere non apre più il cilindro. The temporary key doesn’t open the cylinder. 62 LAB MADE IN ITALY COD. 12060 60 6 Cilindri sagomati (6 perni) Profile cylinders (6 pins) Mezzo cilindro nichelato - Nickel-plated half cylinder CARATTERISTICHE COSTRUTTIVE: Corpo in ottone nichel satinato - Cilindretto in ottone nichelato - Perni in acciaio inox - Controperni in ottone - Molle in bronzo fosforoso Camma DIN disassata di 30° in acciaio autolubrificante - Chiavi piatte reversibili in ottone nichelato con numero di codice. FUNZIONAMENTO: Rotazione della chiave di 360°. PARTI IN DOTAZIONE: 3 chiavi. VARIANTI A RICHIESTA: Impianti speciali KA-MK-GMK-CL. CONSTRUCTIVE FEATURES: Satin nickel-plated brass body - Nickel-plated brass plug Stainless steel pins - Brass drivers - Phosphor bronze springs - Steel off center 30° DIN cam - Nichel-plated brass reversible flat keys with code number. WORKING: Turn the key 360°. PROVIDED WITH: 3 keys. ON REQUEST: Special keying systems KA-MK-GMK-CL. LAB MADE IN ITALY COD. 2121/03 H 372710 5 2020/06 0,14110 2121/04 H 403010 6 2020/06 0,15110 2121/06 H 453510 6 2020/06 0,17110 2121/08 H 504010 6 2020/06 0,19110 2121/15 H 554510 6 2020/06 0,21110 2121/18 H 605010 6 2020/06 0,23110 2121/23 H 655510 6 2020/06 0,24110 2121/24 H 706010 6 2020/06 0,26110 2121/25 H 756510 6 2020/06 0,28110 2121/26 H 807010 6 2020/06 0,29110 2121/27 H 908010 6 2020/06 0,331 5 63 Cilindri sagomati (6 perni) Profile cylinders (6 pins) Mezzo cilindro nichelato con chiave cantiere - Nickel-plated half cylinder with temporary key CARATTERISTICHE COSTRUTTIVE: Corpo in ottone nichel satinato - Cilindretto in ottone nichelato - Perni in acciaio inox - Controperni in ottone - Molle in bronzo fosforoso Camma DIN disassata di 30° in acciaio autolubrificante - Chiavi piatte reversibili in ottone nichelato con numero di codice. FUNZIONAMENTO: Rotazione della chiave di 360°. PARTI IN DOTAZIONE: 3 chiavi, 1 chiave cantiere, 3 cover blu, 1 cover rossa, vite di fissaggio, carta di proprietà. VARIANTI A RICHIESTA: Impianti speciali KA. CONSTRUCTIVE FEATURES: Satin nickel-plated brass body - Nickel-plated brass plug Stainless steel pins - Brass drivers - Phosphor bronze springs - Steel off center 30° DIN cam - Nichel-plated brass reversible flat keys with code number. WORKING: Turn the key 360°. PROVIDED WITH: 3 keys, 1 temporary key, 3 blue key covers, 1 red key cover, fixing screw, registration card. ON REQUEST: Special keying systems KA. Il cilindro funziona normalmente con la chiave cantiere (TK). The cylinder normally works with the temporary key (TK). 2 Dopo l’inserimento e la rotazione della chiave proprietario, la chiave cantiere viene disattivata. The temporary key is disarmed after that the owner key is inserted and turned. 3 La chiave cantiere non apre più il cilindro. The temporary key doesn’t open the cylinder. 64 LAB 2121/03 H TK 37 27 10 5 2020/06 0,18 2121/04 H TK 40 30 10 6 2020/06 2121/06 H TK 45 35 10 6 2020/06 2121/08 H TK 50 40 10 6 2121/15 H TK 55 45 10 2121/18 H TK 60 50 10 2121/23 H TK 65 55 2121/24 H TK 70 2121/25 H TK 75 2121/26 H TK 2121/27 H TK MADE IN ITALY 1 COD. 1 5 0,19 1 5 0,21 1 5 2020/06 0,23 1 5 6 2020/06 0,25 1 5 6 2020/06 0,27 1 5 10 6 2020/06 0,28 1 5 60 10 6 2020/06 0,30 1 5 65 10 6 2020/06 0,32 1 5 80 70 10 6 2020/06 0,33 1 5 90 80 10 6 2020/06 0,37 1 5 Cilindri sagomati (6 perni) Profile cylinders (6 pins) Mezzo cilindro nichelato - Nickel-plated half cylinder CARATTERISTICHE COSTRUTTIVE: Corpo in ottone nichel satinato - Cilindretto in ottone nichelato - Perni in acciao inox - Controperni in ottone - Molle in bronzo fosforoso Camma DIN disassata di 30° in acciaio autolubrificante - Chiavi piatte reversibili in ottone nichelato con numero di codice. FUNZIONAMENTO: Rotazione della chiave di 360°. PARTI IN DOTAZIONE: 5 chiavi, vite di fissaggio, carta di proprietà. VARIANTI A RICHIESTA: Impianti speciali KA-MK-GMK-CL. CONSTRUCTIVE FEATURES: Satin nickel-plated brass body - Nickel-plated brass plug Stainless steel pins - Brass drivers - Phosphor bronze springs - Steel off center 30° DIN cam - Nichel-plated brass reversible flat keys with code number. WORKING: Turn the key 360°. PROVIDED WITH: 5 keys, fixing screw, registration card. ON REQUEST: Special keying systems KA-MK-GMK-CL. LAB MADE IN ITALY COD. 2121/503 H372710 5 2020/06 0,18110 2121/504 H403010 6 2020/06 0,19110 2121/506 H453510 6 2020/06 0,21110 2121/508 H504010 6 2020/06 0,23110 2121/515 H554510 6 2020/06 0,25110 2121/518 H605010 6 2020/06 0,27110 2121/523 H655510 6 2020/06 0,28110 2121/524 H706010 6 2020/06 0,30110 2121/525 H756510 6 2020/06 0,32110 2121/526 H807010 6 2020/06 0,33110 908010 6 2121/527 H 2020/06 0,371 5 65 Cilindri sagomati (6 perni) Profile cylinders (6 pins) Mezzo cilindro nichelato con chiave cantiere - Nickel-plated half cylinder with temporary key CARATTERISTICHE COSTRUTTIVE: Corpo in ottone nichel satinato - Cilindretto in ottone nichelato - Perni in acciaio inox - Controperni in ottone - Molle in bronzo fosforoso Camma DIN disassata di 30° in acciaio autolubrificante - Chiavi piatte reversibili in ottone nichelato con numero di codice. FUNZIONAMENTO: Rotazione della chiave di 360°. PARTI IN DOTAZIONE: 5 chiavi, 1 chiave cantiere, 5 cover blu, 1 cover rossa, vite di fissaggio, carta di proprietà. VARIANTI A RICHIESTA: Impianti speciali KA. CONSTRUCTIVE FEATURES: Satin nickel-plated brass body - Nickel-plated brass plug Stainless steel pins - Brass drivers - Phosphor bronze springs - Steel off center 30° DIN cam - Nichel-plated brass reversible flat keys with code number. WORKING: Turn the key 360°. PROVIDED WITH: 5 keys, 1 temporary key, 5 blue key covers, 1 red key cover, fixing screw, registration card. ON REQUEST: Special keying systems KA. 1 Il cilindro funziona normalmente con la chiave cantiere (TK). The cylinder normally works with the temporary key (TK). 2 Dopo l’inserimento e la rotazione della chiave proprietario, la chiave cantiere viene disattivata. The temporary key is disarmed after that the owner key is inserted and turned. 3 La chiave cantiere non apre più il cilindro. The temporary key doesn’t open the cylinder. 66 LAB MADE IN ITALY COD. 2121/503 H TK 37 27 10 5 2020/06 0,221 5 2121/504 H TK 40 30 10 6 2020/06 0,231 5 2121/506 H TK 45 35 10 6 2020/06 0,251 5 2121/508 H TK 50 40 10 6 2020/06 0,271 5 2121/515 H TK 55 45 10 6 2020/06 0,291 5 2121/518 H TK 60 50 10 6 2020/06 0,311 5 2121/523 H TK 2020/06 0,32 2121/524 H TK 70 60 10 6 2020/06 0,341 5 2121/525 H TK 75 65 10 6 2020/06 0,361 5 2121/526 H TK 80 70 10 6 2020/06 0,371 5 2121/527 H TK 90 80 10 6 2020/06 0,411 5 65 55 10 6 1 5 Cilindri sagomati frizionati (6 perni) Profile clutching cylinders (6 pins) Doppio cilindro nichelato - Nickel-plated double cylinder NEW CARATTERISTICHE COSTRUTTIVE: Corpo in ottone nichel satinato - Cilindretti in ottone nichelato - Perni in acciaio inox - Controperni in ottone - Molle in bronzo fosforoso e acciaio inox - Camma DIN disassata di 30° in acciaio autolubrificante - Chiavi piatte reversibili in ottone nichelato con numero di codice. FUNZIONAMENTO: Rotazione della chiave di 360° - Le chiavi sono indipendenti e possono azionare il cilindro anche se dall’altro lato é stata inserita e ruotata la chiave. PARTI IN DOTAZIONE: 3 chiavi. VARIANTI A RICHIESTA: Impianti speciali KA-MK-GMK-CL. CONSTRUCTIVE FEATURES: Satin nickel-plated brass body - Nickel-plated brass plugs - Stainless steel pins - Brass drivers - Phosphor bronze and stainless steel springs Steel off center 30° DIN cam - Nichel-plated brass reversible flat keys with code number. WORKING: Turn the key 360° - The keys are independent and can operate on the cylinder even if on the other side the key was inserted and turned. PROVIDED WITH: 3 keys. ON REQUEST: Special keying systems KA-MK-GMK-CL. LAB MADE IN ITALY COD. 2122/04 H 603030 6 2020/06 0,261 10 2122/06 H 703535 6 2020/06 0,291 10 2122/08 H 804040 6 2020/06 0,321 10 2122/11 H 653035 6 2020/06 0,271 10 2122/14 H 703040 6 2020/06 0,291 10 2122/15 H 753045 6 2020/06 0,311 10 2122/16 H 753540 6 2020/06 0,311 10 2122/17 H 803545 6 2020/06 0,321 10 2122/18 H 803050 6 2020/06 0,321 10 2122/19 H 854045 6 2020/06 0,341 10 2122/20 H 904050 6 2020/06 0,361 5 2122/21 H 904545 6 2020/06 0,361 5 2122/22 H 10050 50 6 2020/06 0,391 5 2122/23 H 853055 6 2020/06 0,341 10 2122/24 H 903060 6 2020/06 0,361 5 2122/25 H 953065 6 2020/06 0,381 5 2122/26 H 10030 70 6 2020/06 0,391 5 2122/27 H 11030 80 6 2020/06 0,421 5 2122/28 H 853550 6 2020/06 0,341 10 2122/29 H 903555 6 2020/06 0,361 5 2122/30 H 953560 6 2020/06 0,381 5 2122/31 H 10035 65 6 2020/06 0,391 5 2122/32 H 954055 6 2020/06 0,381 5 2122/33 H 10040 60 6 2020/06 0,391 5 2122/34 H 11040 70 6 2020/06 0,421 5 2122/35 H 12040 80 6 2020/06 0,451 5 2122/36 H 954550 6 2020/06 0,381 5 2122/37 H 10045 55 6 2020/06 0,391 5 2122/38 H 11050 60 6 2020/06 0,421 5 2122/39 H 12060 60 6 2020/06 0,451 5 67 Cilindri sagomati frizionati (6 perni) Profile clutching cylinders (6 pins) Doppio cilindro nichelato con chiave cantiere - Nickel-plated double cylinder with temporary key NEW CARATTERISTICHE COSTRUTTIVE: Corpo in ottone nichel satinato - Cilindretti in ottone nichelato - Perni in acciaio inox - Controperni in ottone - Molle in bronzo fosforoso e acciaio inox - Camma DIN disassata di 30° in acciaio autolubrificante - Chiavi piatte reversibili in ottone nichelato con numero di codice. FUNZIONAMENTO: Rotazione della chiave di 360° - Le chiavi sono indipendenti e possono azionare il cilindro anche se dall’altro lato é stata inserita e ruotata la chiave. PARTI IN DOTAZIONE: 3 chiavi, 1 chiave cantiere, 3 cover blu, 1 cover rossa, vite di fissaggio, carta di proprietà. VARIANTI A RICHIESTA: Impianti speciali KA. CONSTRUCTIVE FEATURES: Satin nickel-plated brass body - Nickel-plated brass plugs - Stainless steel pins - Brass drivers - Phosphor bronze and stainless steel springs Steel off center 30° DIN cam - Nichel-plated brass reversible flat keys with code number. WORKING: Turn the key 360° - The keys are independent and can operate on the cylinder even if on the other side the key was inserted and turned. PROVIDED WITH: 3 keys, 1 temporary key, 3 blue key covers, 1 red key cover, fixing screw, registration card. ON REQUEST: Special keying systems KA. 2122/04 H TK 60 30 30 6 2020/06 0,271 5 2122/06 H TK 70 35 35 6 2020/06 0,301 5 2122/08 H TK 80 40 40 6 2020/06 0,331 5 2122/11 H TK 65 30 35 6 2020/06 0,281 5 2122/14 H TK 70 30 40 6 2020/06 0,301 5 2122/15 H TK 75 30 45 6 2020/06 0,321 5 2122/16 H TK 75 35 40 6 2020/06 0,321 5 2122/17 H TK 80 35 45 6 2020/06 0,331 5 2122/18 H TK 80 30 50 6 2020/06 0,331 5 2122/19 H TK 85 40 45 6 2020/06 0,351 5 2122/20 H TK 90 40 50 6 2020/06 0,371 5 1 2122/21 H TK 90 45 45 6 2020/06 0,371 5 2122/22 H TK 10050 50 6 2020/06 0,401 5 Il cilindro funziona normalmente con la chiave cantiere (TK). 2122/23 H TK 85 30 55 6 2020/06 0,351 5 2122/24 H TK 90 30 60 6 2020/06 0,371 5 2122/25 H TK 95 30 65 6 2020/06 0,391 5 2122/26 H TK 10030 70 6 2020/06 0,401 5 2122/27 H TK 11030 80 6 2020/06 0,431 5 2122/28 H TK 85 35 50 6 2020/06 0,351 5 2122/29 H TK 90 35 55 6 2020/06 0,371 5 2122/30 H TK 95 35 60 6 2020/06 0,391 5 2122/31 H TK 10035 65 6 2020/06 0,401 5 2122/32 H TK 95 40 55 6 2020/06 0,391 5 2122/33 H TK 10040 60 6 2020/06 0,401 5 2122/34 H TK 11040 70 6 2020/06 0,431 5 2122/35 H TK 12040 80 6 2020/06 0,461 5 2122/36 H TK 95 45 50 6 2020/06 0,391 5 2122/37 H TK 10045 55 6 2020/06 0,401 5 2122/38 H TK 11050 60 6 2020/06 0,431 5 2122/39 H TK 2020/06 0,461 5 The cylinder normally works with the temporary key (TK). 2 Dopo l’inserimento e la rotazione della chiave proprietario, la chiave cantiere viene disattivata. The temporary key is disarmed after that the owner key is inserted and turned. 3 La chiave cantiere non apre più il cilindro. The temporary key doesn’t open the cylinder. 68 LAB MADE IN ITALY COD. 12060 60 6 Cilindri sagomati frizionati (6 perni) Profile clutching cylinders (6 pins) Doppio cilindro nichelato - Nickel-plated double cylinder NEW CARATTERISTICHE COSTRUTTIVE: Corpo in ottone nichel satinato - Cilindretti in ottone nichelato - Perni in acciaio inox - Controperni in ottone - Molle in bronzo fosforoso e acciaio inox - Camma DIN disassata di 30° in acciaio autolubrificante - Chiavi piatte reversibili in ottone nichelato con numero di codice. FUNZIONAMENTO: Rotazione della chiave di 360° - Le chiavi sono indipendenti e possono azionare il cilindro anche se dall’altro lato é stata inserita e ruotata la chiave. PARTI IN DOTAZIONE: 5 chiavi, vite di fissaggio, carta di proprietà. VARIANTI A RICHIESTA: Impianti speciali KA-MK-GMK-CL. CONSTRUCTIVE FEATURES: Satin nickel-plated brass body - Nickel-plated brass plugs - Stainless steel pins - Brass drivers - Phosphor bronze and stainless steel springs Steel off center 30° DIN cam - Nichel-plated brass reversible flat keys with code number. WORKING: Turn the key 360° - The keys are independent and can operate on the cylinder even if on the other side the key was inserted and turned. PROVIDED WITH: 5 keys, fixing screw, registration card. ON REQUEST: Special keying systems KA-MK-GMK-CL. LAB MADE IN ITALY COD. 2122/504 H603030 6 2020/06 0,271 10 2122/506 H703535 6 2020/06 0,301 10 2122/508 H804040 6 2020/06 0,331 10 2122/511 H653035 6 2020/06 0,281 10 2122/514 H703040 6 2020/06 0,301 10 2122/515 H753045 6 2020/06 0,321 10 2122/516 H753540 6 2020/06 0,321 10 2122/517 H803545 6 2020/06 0,331 10 2122/518 H803050 6 2020/06 0,331 10 2122/519 H854045 6 2020/06 0,351 10 2122/520 H904050 6 2020/06 0,371 5 2122/521 H904545 6 2020/06 0,371 5 2122/522 H100 50 50 6 2020/06 0,40 1 2122/523 H853055 6 2020/06 0,351 10 2122/524 H903060 6 2020/06 0,371 5 2122/525 H953065 6 2020/06 0,391 5 2122/526 H100 30 70 6 2020/06 0,40 1 5 2122/527 H110 30 80 6 2020/06 0,43 1 5 2122/528 H853550 6 2020/06 0,351 10 2122/529 H903555 6 2020/06 0,371 5 2122/530 H953560 6 2020/06 0,391 5 2122/531 H100 35 65 6 2020/06 0,40 1 2122/532 H954055 6 2020/06 0,391 5 2122/533 H100 40 60 6 2020/06 0,40 1 5 5 5 2122/534 H110 40 70 6 2020/06 0,43 1 5 2122/535 H120 40 80 6 2020/06 0,46 1 2122/536 H954550 6 2020/06 0,391 5 2122/537 H100 45 55 6 2020/06 0,40 1 5 2122/538 H110 50 60 6 2020/06 0,43 1 5 2122/539 H120 60 60 6 2020/06 0,46 1 5 5 69 Cilindri sagomati frizionati (6 perni) Profile clutching cylinders (6 pins) Doppio cilindro nichelato con chiave cantiere - Nickel-plated double cylinder with temporary key NEW CARATTERISTICHE COSTRUTTIVE: Corpo in ottone nichel satinato - Cilindretti in ottone nichelato - Perni in acciaio inox - Controperni in ottone - Molle in bronzo fosforoso e acciaio inox - Camma DIN disassata di 30° in acciaio autolubrificante - Chiavi piatte reversibili in ottone nichelato con numero di codice. FUNZIONAMENTO: Rotazione della chiave di 360° - Le chiavi sono indipendenti e possono azionare il cilindro anche se dall’altro lato é stata inserita e ruotata la chiave. PARTI IN DOTAZIONE: 5 chiavi, 1 chiave cantiere, 5 cover blu, 1 cover rossa, vite di fissaggio, carta di proprietà. VARIANTI A RICHIESTA: Impianti speciali KA. CONSTRUCTIVE FEATURES: Satin nickel-plated brass body - Nickel-plated brass plugs - Stainless steel pins - Brass drivers - Phosphor bronze and stainless steel springs Steel off center 30° DIN cam - Nichel-plated brass reversible flat keys with code number. WORKING: Turn the key 360° - The keys are independent and can operate on the cylinder even if on the other side the key was inserted and turned. PROVIDED WITH: 5 keys, 1 temporary key, 5 blue key covers, 1 red key cover, fixing screw, registration card. ON REQUEST: Special keying systems KA. 2122/504 H TK 60 30 30 6 2020/06 0,311 5 2122/506 H TK 70 35 35 6 2020/06 0,341 5 2122/508 H TK 80 40 40 6 2020/06 0,371 5 2122/511 H TK 65 30 35 6 2020/06 0,321 5 2122/514 H TK 70 30 40 6 2020/06 0,341 5 2122/515 H TK 75 30 45 6 2020/06 0,361 5 2122/516 H TK 75 35 40 6 2020/06 0,361 5 2122/517 H TK 80 35 45 6 2020/06 0,371 5 2122/518 H TK 80 30 50 6 2020/06 0,371 5 2122/519 H TK 85 40 45 6 2020/06 0,391 5 2122/520 H TK 90 40 50 6 2020/06 0,411 5 1 2122/521 H TK 90 45 45 6 2020/06 0,411 5 2122/522 H TK 10050 50 6 2020/06 0,441 5 Il cilindro funziona normalmente con la chiave cantiere (TK). 2122/523 H TK 85 30 55 6 2020/06 0,391 5 2122/524 H TK 90 30 60 6 2020/06 0,411 5 The cylinder normally works with the temporary key (TK). 2122/525 H TK 95 30 65 6 2020/06 0,431 5 2122/526 H TK 10030 70 6 2020/06 0,441 5 2122/527 H TK 11030 80 6 2020/06 0,471 5 2122/528 H TK 85 35 50 6 2020/06 0,391 5 2122/529 H TK 90 35 55 6 2020/06 0,411 5 2122/530 H TK 95 35 60 6 2020/06 0,431 5 2122/531 H TK 10035 65 6 2020/06 0,441 5 2122/532 H TK 95 40 55 6 2020/06 0,431 5 2122/533 H TK 10040 60 6 2020/06 0,441 5 2122/534 H TK 11040 70 6 2020/06 0,471 5 2122/535 H TK 12040 80 6 2020/06 0,501 5 2122/536 H TK 95 45 50 6 2020/06 0,431 5 2122/537 H TK 10045 55 6 2020/06 0,441 5 2122/538 H TK 11050 60 6 2020/06 0,471 5 2122/539 H TK 2020/06 0,501 5 2 Dopo l’inserimento e la rotazione della chiave proprietario, la chiave cantiere viene disattivata. The temporary key is disarmed after that the owner key is inserted and turned. 3 La chiave cantiere non apre più il cilindro. The temporary key doesn’t open the cylinder. 70 LAB MADE IN ITALY COD. 12060 60 6 Cilindri sagomati (6 perni) Profile cylinders (6 pins) Doppio cilindro nichelato con pomolo - Nickel-plated double cylinder with knob CARATTERISTICHE COSTRUTTIVE: Corpo in ottone nichel satinato - Cilindretto in ottone nichelato - Perni in acciaio inox - Controperni in ottone - Molle in bronzo fosforoso Camma DIN disassata di 30° in acciaio autolubrificante - Pomolo in ottone cromato Chiavi piatte reversibili in ottone nichelato con numero di codice. FUNZIONAMENTO: Rotazione della chiave o del pomolo di 360°. PARTI IN DOTAZIONE: 3 chiavi. VARIANTI A RICHIESTA: Impianti speciali KA-MK-GMK-CL. CONSTRUCTIVE FEATURES: Satin nickel-plated brass body - Nickel-plated brass plug - Stainless steel pins - Brass drivers - Phosphor bronze springs - Steel off center 30° DIN cam - Chrome-plated brass knob - Nichel-plated brass reversible flat keys with code number. WORKING: Turn the key or knob 360°. PROVIDED WITH: 3 keys. ON REQUEST: Special keying systems KA-MK-GMK-CL. LAB MADE IN ITALY COD. 2123/04 H 60 30 30 6 2020/06 0,331 5 2123/07 H 70 35 35 6 2020/06 0,361 5 2123/10 H 80 40 40 6 2020/06 0,391 5 2123/13 H 65 30 35 6 2020/06 0,341 5 2123/14 H 70 30 40 6 2020/06 0,361 5 2123/15 H 75 30 45 6 2020/06 0,381 5 2123/16 H 80 30 50 6 2020/06 0,391 5 2123/17 H 90 30 60 6 2020/06 0,431 5 2123/18 H 10030 70 6 2020/06 0,461 5 2123/19 H 11030 80 6 2020/06 0,491 5 2123/20 H 65 35 30 6 2020/06 0,341 5 2123/21 H 75 35 40 6 2020/06 0,381 5 2123/22 H 80 35 45 6 2020/06 0,391 5 2123/23 H 85 35 50 6 2020/06 0,411 5 2123/24 H 70 40 30 6 2020/06 0,361 5 2123/25 H 75 40 35 6 2020/06 0,381 5 2123/26 H 85 40 45 6 2020/06 0,411 5 2123/27 H 90 40 50 6 2020/06 0,431 5 2123/28 H 10040 60 6 2020/06 0,461 5 2123/29 H 11040 70 6 2020/06 0,491 5 2123/30 H 12040 80 6 2020/06 0,521 5 2123/31 H 75 45 30 6 2020/06 0,381 5 2123/32 H 80 45 35 6 2020/06 0,391 5 2123/33 H 85 45 40 6 2020/06 0,411 5 2123/34 H 90 45 45 6 2020/06 0,431 5 2123/35 H 80 50 30 6 2020/06 0,391 5 2123/36 H 85 50 35 6 2020/06 0,411 5 2123/37 H 90 50 40 6 2020/06 0,431 5 2123/38 H 10050 50 6 2020/06 0,461 5 2123/39 H 11050 60 6 2020/06 0,491 5 2123/40 H 90 60 30 6 2020/06 0,431 5 2123/41 H 95 60 35 6 2020/06 0,451 5 2123/42 H 10060 40 6 2020/06 0,461 5 2123/43 H 11060 50 6 2020/06 0,491 5 2123/44 H 12060 60 6 2020/06 0,521 5 2123/45 H 10070 30 6 2020/06 0,461 5 71 Cilindri sagomati (6 perni) Profile cylinders (6 pins) Doppio cilindro nichelato con pomolo con chiave cantiere - Nickel-plated double cylinder with knob with temporary key CARATTERISTICHE COSTRUTTIVE: Corpo in ottone nichel satinato - Cilindretto in ottone nichelato - Perni in acciaio inox - Controperni in ottone - Molle in bronzo fosforoso Camma DIN disassata di 30° in acciaio autolubrificante - Pomolo in ottone cromato Chiavi piatte reversibili in ottone nichelato con numero di codice. FUNZIONAMENTO: Rotazione della chiave o del pomolo di 360°. PARTI IN DOTAZIONE: 3 chiavi, 1 chiave cantiere, 3 cover blu, 1 cover rossa, vite di fissaggio, carta di proprietà. VARIANTI A RICHIESTA: Impianti speciali KA. CONSTRUCTIVE FEATURES: Satin nickel-plated brass body - Nickel-plated brass plug - Stainless steel pins - Brass drivers - Phosphor bronze springs - Steel off center 30° DIN cam - Chrome-plated brass knob - Nichel-plated brass reversible flat keys with code number. WORKING: Turn the key or knob 360°. PROVIDED WITH: 3 keys, 1 temporary key, 3 blue key covers, 1 red key cover, fixing screw, registration card. ON REQUEST: Special keying systems KA. 2123/04 H TK 60 30 30 6 2020/06 0,361 5 2123/07 H TK 70 35 35 6 2020/06 0,391 5 2123/10 H TK 80 40 40 6 2020/06 0,421 5 2123/13 H TK 65 30 35 6 2020/06 0,371 5 2123/14 H TK 70 30 40 6 2020/06 0,391 5 2123/15 H TK 75 30 45 6 2020/06 0,411 5 2123/16 H TK 80 30 50 6 2020/06 0,421 5 2123/17 H TK 90 30 60 6 2020/06 0,461 5 2123/18 H TK 10030 70 6 2020/06 0,491 5 2123/19 H TK 11030 80 6 2020/06 0,521 5 2123/20 H TK 65 35 30 6 2020/06 0,371 5 1 2123/21 H TK 75 35 40 6 2020/06 0,411 5 2123/22 H TK 80 35 45 6 2020/06 0,421 5 Il cilindro funziona normalmente con la chiave cantiere (TK). 2123/23 H TK 85 35 50 6 2020/06 0,441 5 2123/24 H TK 70 40 30 6 2020/06 0,391 5 The cylinder normally works with the temporary key (TK). 2123/25 H TK 75 40 35 6 2020/06 0,411 5 2123/26 H TK 85 40 45 6 2020/06 0,441 5 2123/27 H TK 2 Dopo l’inserimento e la rotazione della chiave proprietario, la chiave cantiere viene disattivata. The temporary key is disarmed after that the owner key is inserted and turned. 3 La chiave cantiere non apre più il cilindro. The temporary key doesn’t open the cylinder. 72 LAB MADE IN ITALY COD. 90 40 50 6 2020/06 0,461 5 2123/28 H TK 10040 60 6 2020/06 0,491 5 2123/29 H TK 11040 70 6 2020/06 0,521 5 2123/30 H TK 12040 80 6 2020/06 0,551 5 2123/31 H TK 75 45 30 6 2020/06 0,411 5 2123/32 H TK 80 45 35 6 2020/06 0,421 5 2123/33 H TK 85 45 40 6 2020/06 0,441 5 2123/34 H TK 90 45 45 6 2020/06 0,461 5 2123/35 H TK 80 50 30 6 2020/06 0,421 5 2123/36 H TK 85 50 35 6 2020/06 0,441 5 2123/37 H TK 90 50 40 6 2020/06 0,461 5 2123/38 H TK 10050 50 6 2020/06 0,491 5 2123/39 H TK 11050 60 6 2020/06 0,521 5 2123/40 H TK 90 60 30 6 2020/06 0,461 5 2123/41 H TK 95 60 35 6 2020/06 0,481 5 2123/42 H TK 10060 40 6 2020/06 0,491 5 11060 50 6 2020/06 0,521 5 2123/44 H TK 12060 60 6 2020/06 0,551 5 2123/45 H TK 10070 30 6 2020/06 0,491 5 2123/43 H TK Cilindri sagomati (6 perni) Profile cylinders (6 pins) Doppio cilindro nichelato con pomolo - Nickel-plated double cylinder with knob CARATTERISTICHE COSTRUTTIVE: Corpo in ottone nichel satinato - Cilindretto in ottone nichelato - Perni in acciaio inox - Controperni in ottone - Molle in bronzo fosforoso Camma DIN disassata di 30° in acciaio autolubrificante - Pomolo in ottone cromato Chiavi piatte reversibili in ottone nichelato con numero di codice. FUNZIONAMENTO: Rotazione della chiave o del pomolo di 360°. PARTI IN DOTAZIONE: 5 chiavi, vite di fissaggio, carta di proprietà. VARIANTI A RICHIESTA: Impianti speciali KA-MK-GMK-CL. CONSTRUCTIVE FEATURES: Satin nickel-plated brass body - Nickel-plated brass plug - Stainless steel pins - Brass drivers - Phosphor bronze springs - Steel off center 30° DIN cam - Chrome-plated brass knob - Nichel-plated brass reversible flat keys with code number. WORKING: Turn the key or knob 360°. PROVIDED WITH: 5 keys, fixing screw, registration card. ON REQUEST: Special keying systems KA-MK-GMK-CL. LAB MADE IN ITALY COD. 2123/504 H60 30 30 6 2020/06 0,36 1 5 2123/507 H70 35 35 6 2020/06 0,39 1 5 2123/510 H80 40 40 6 2020/06 0,42 1 5 2123/513 H65 30 35 6 2020/06 0,37 1 5 2123/514 H70 30 40 6 2020/06 0,39 1 5 2123/515 H75 30 45 6 2020/06 0,41 1 5 2123/516 H80 30 50 6 2020/06 0,42 1 5 2123/517 H90 30 60 6 2020/06 0,46 1 5 2123/518 H100 30 70 6 2020/06 0,49 1 5 2123/519 H110 30 80 6 2020/06 0,52 1 5 2123/520 H65 35 30 6 2020/06 0,37 1 5 2123/521 H75 35 40 6 2020/06 0,41 1 5 2123/522 H80 35 45 6 2020/06 0,42 1 5 2123/523 H85 35 50 6 2020/06 0,44 1 5 2123/524 H70 40 30 6 2020/06 0,39 1 5 2123/525 H75 40 35 6 2020/06 0,41 1 5 2123/526 H85 40 45 6 2020/06 0,44 1 5 2123/527 H90 40 50 6 2020/06 0,46 1 5 2123/528 H100 40 60 6 2020/06 0,49 1 5 2123/529 H110 40 70 6 2020/06 0,52 1 5 6 2020/06 0,55 1 5 2123/531 H75 45 30 6 2123/530 H120 40 80 2020/06 0,41 1 5 2123/532 H80 45 35 6 2020/06 0,42 1 5 2123/533 H85 45 40 6 2020/06 0,44 1 5 2123/534 H90 45 45 6 2020/06 0,46 1 5 2123/535 H80 50 30 6 2020/06 0,42 1 5 2123/536 H85 50 35 6 2020/06 0,44 1 5 2123/537 H90 50 40 6 2020/06 0,46 1 5 2123/538 H100 50 50 2020/06 0,49 1 5 6 2123/539 H110 50 60 6 2020/06 0,52 1 5 2123/540 H90 60 30 6 2020/06 0,46 1 5 2123/541 H95 60 35 6 2020/06 0,48 1 5 2123/542 H100 60 40 6 2020/06 0,49 1 5 2123/543 H110 60 50 6 2020/06 0,52 1 5 2123/544 H 120 60 60 6 2020/06 0,55 1 5 2123/545 H 100 70 30 6 2020/06 0,49 1 5 73 Cilindri sagomati (6 perni) Profile cylinders (6 pins) Doppio cilindro nichelato con pomolo con chiave cantiere - Nickel-plated double cylinder with knob with temporary key CARATTERISTICHE COSTRUTTIVE: Corpo in ottone nichel satinato - Cilindretto in ottone nichelato - Perni in acciaio inox - Controperni in ottone - Molle in bronzo fosforoso Camma DIN disassata di 30° in acciaio autolubrificante - Pomolo in ottone cromato Chiavi piatte reversibili in ottone nichelato con numero di codice. FUNZIONAMENTO: Rotazione della chiave o del pomolo di 360°. PARTI IN DOTAZIONE: 5 chiavi, 1 chiave cantiere, 5 cover blu, 1 cover rossa, vite di fissaggio, carta di proprietà. VARIANTI A RICHIESTA: Impianti speciali KA. CONSTRUCTIVE FEATURES: Satin nickel-plated brass body - Nickel-plated brass plug - Stainless steel pins - Brass drivers - Phosphor bronze springs - Steel off center 30° DIN cam - Chrome-plated brass knob - Nichel-plated brass reversible flat keys with code number. WORKING: Turn the key or knob 360°. PROVIDED WITH: 5 keys, 1 temporary key, 5 blue key covers, 1 red key cover, fixing screw, registration card. ON REQUEST: Special keying systems KA. 2123/504 H TK 60 30 30 6 2020/06 0,401 5 2123/507 H TK 70 35 35 6 2020/06 0,431 5 2123/510 H TK 80 40 40 6 2020/06 0,461 5 2123/513 H TK 65 30 35 6 2020/06 0,411 5 2123/514 H TK 70 30 40 6 2020/06 0,431 5 2123/515 H TK 75 30 45 6 2020/06 0,451 5 2123/516 H TK 80 30 50 6 2020/06 0,461 5 2123/517 H TK 90 30 60 6 2020/06 0,501 5 2123/518 H TK 10030 70 6 2020/06 0,531 5 2123/519 H TK 11030 80 6 2020/06 0,561 5 2123/520 H TK 65 35 30 6 2020/06 0,411 5 1 2123/521 H TK 75 35 40 6 2020/06 0,451 5 2123/522 H TK 80 35 45 6 2020/06 0,461 5 Il cilindro funziona normalmente con la chiave cantiere (TK). 2123/523 H TK 85 35 50 6 2020/06 0,481 5 2123/524 H TK 70 40 30 6 2020/06 0,431 5 The cylinder normally works with the temporary key (TK). 2123/525 H TK 75 40 35 6 2020/06 0,451 5 2123/526 H TK 85 40 45 6 2020/06 0,481 5 2123/527 H TK 90 40 50 6 2020/06 0,501 5 2123/528 H TK 10040 60 6 2020/06 0,531 5 2123/529 H TK 11040 70 6 2020/06 0,561 5 2123/530 H TK 12040 80 6 2020/06 0,591 5 2123/531 H TK 75 45 30 6 2020/06 0,451 5 2123/532 H TK 80 45 35 6 2020/06 0,461 5 2123/533 H TK 85 45 40 6 2020/06 0,481 5 2123/534 H TK 90 45 45 6 2020/06 0,501 5 2123/535 H TK 80 50 30 6 2020/06 0,461 5 2123/536 H TK 85 50 35 6 2020/06 0,481 5 2123/537 H TK 90 50 40 6 2020/06 0,501 5 2123/538 H TK 10050 50 6 2020/06 0,531 5 2123/539 H TK 11050 60 6 2020/06 0,561 5 2123/540 H TK 90 60 30 6 2020/06 0,501 5 2123/541 H TK 95 60 35 6 2020/06 0,521 5 2123/542 H TK 10060 40 6 2020/06 0,531 5 2123/543 H TK 11060 50 6 2020/06 0,561 5 2123/544 H TK 12060 60 6 2020/06 0,591 5 2123/545 H TK 10070 30 6 2020/06 0,531 5 2 Dopo l’inserimento e la rotazione della chiave proprietario, la chiave cantiere viene disattivata. The temporary key is disarmed after that the owner key is inserted and turned. 3 La chiave cantiere non apre più il cilindro. The temporary key doesn’t open the cylinder. 74 LAB MADE IN ITALY COD. Cilindri sagomati (6 perni) Profile cylinders (6 pins) Doppio cilindro nichelato con gambo - Nickel-plated double cylinder with shank CARATTERISTICHE COSTRUTTIVE: Corpo in ottone nichel satinato - Cilindretto in ottone nichelato - Perni in acciaio inox - Controperni in ottone - Molle in bronzo fosforoso Camma DIN disassata di 30° in acciaio autolubrificante - Chiavi piatte reversibili in ottone nichelato con numero di codice. FUNZIONAMENTO: Rotazione della chiave o del pomolo di 360°. PARTI IN DOTAZIONE: 3 chiavi. VARIANTI A RICHIESTA: Impianti speciali KA-MK-GMK-CL. CONSTRUCTIVE FEATURES: Satin nickel-plated brass body - Nickel-plated brass plug Stainless steel pins - Brass drivers - Phosphor bronze springs - Steel off center 30° DIN cam - Nichel-plated brass reversible flat keys with code number. WORKING: Turn the key or knob 360°. PROVIDED WITH: 3 keys. ON REQUEST: Special keying systems KA-MK-GMK-CL. LAB MADE IN ITALY COD. 2126/04 H 603030 6 2020/06 0,301 5 2126/20 H 653530 6 2020/06 0,311 5 2126/24 H 704030 6 2020/06 0,331 5 2126/31 H 754530 6 2020/06 0,351 5 2126/35 H 805030 6 2020/06 0,361 5 2126/40 H 906030 6 2020/06 0,401 5 2126/45 H 10070 30 6 2020/06 0,431 5 75 Cilindri sagomati (6 perni) Profile cylinders (6 pins) Doppio cilindro nichelato con gambo con chiave cantiere - Nickel-plated double cylinder with shank with temporary key CARATTERISTICHE COSTRUTTIVE: Corpo in ottone nichel satinato - Cilindretto in ottone nichelato - Perni in acciaio inox - Controperni in ottone - Molle in bronzo fosforoso Camma DIN disassata di 30° in acciaio autolubrificante - Chiavi piatte reversibili in ottone nichelato con numero di codice. FUNZIONAMENTO: Rotazione della chiave o del pomolo di 360°. PARTI IN DOTAZIONE: 3 chiavi, 1 chiave cantiere, 3 cover blu, 1 cover rossa, vite di fissaggio, carta di proprietà. VARIANTI A RICHIESTA: Impianti speciali KA. CONSTRUCTIVE FEATURES: Satin nickel-plated brass body - Nickel-plated brass plug Stainless steel pins - Brass drivers - Phosphor bronze springs - Steel off center 30° DIN cam - Nichel-plated brass reversible flat keys with code number. WORKING: Turn the key or knob 360°. PROVIDED WITH: 3 keys, 1 temporary key, 3 blue key covers, 1 red key cover, fixing screw, registration card. ON REQUEST: Special keying systems KA. 2126/04 H TK 60 30 30 6 2020/06 0,341 5 2126/20 H TK 65 35 30 6 2020/06 0,351 5 2126/24 H TK 70 40 30 6 2020/06 0,371 5 2126/31 H TK 75 45 30 6 2020/06 0,391 5 2126/35 H TK 80 50 30 6 2020/06 0,401 5 2126/40 H TK 90 60 30 6 2020/06 0,441 5 2126/45 H TK 10070 30 6 2020/06 0,471 5 1 Il cilindro funziona normalmente con la chiave cantiere (TK). The cylinder normally works with the temporary key (TK). 2 Dopo l’inserimento e la rotazione della chiave proprietario, la chiave cantiere viene disattivata. The temporary key is disarmed after that the owner key is inserted and turned. 3 La chiave cantiere non apre più il cilindro. The temporary key doesn’t open the cylinder. 76 LAB MADE IN ITALY COD. Cilindri sagomati (6 perni) Profile cylinders (6 pins) Doppio cilindro nichelato con gambo - Nickel-plated double cylinder with shank CARATTERISTICHE COSTRUTTIVE: Corpo in ottone nichel satinato - Cilindretto in ottone nichelato - Perni in acciaio inox - Controperni in ottone - Molle in bronzo fosforoso Camma DIN disassata di 30° in acciaio autolubrificante - Chiavi piatte reversibili in ottone nichelato con numero di codice. FUNZIONAMENTO: Rotazione della chiave o del pomolo di 360°. PARTI IN DOTAZIONE: 5 chiavi, vite di fissaggio, carta di proprietà. VARIANTI A RICHIESTA: Impianti speciali KA-MK-GMK-CL. CONSTRUCTIVE FEATURES: Satin nickel-plated brass body - Nickel-plated brass plug Stainless steel pins - Brass drivers - Phosphor bronze springs - Steel off center 30° DIN cam - Nichel-plated brass reversible flat keys with code number. WORKING: Turn the key or knob 360°. PROVIDED WITH: 5 keys, fixing screw, registration card. ON REQUEST: Special keying systems KA-MK-GMK-CL. LAB MADE IN ITALY COD. 2126/504 H603030 6 2020/06 0,331 5 2126/520 H 653530 6 2020/06 0,341 5 2126/524 H 704030 6 2020/06 0,361 5 2126/531 H 754530 6 2020/06 0,381 5 2126/535 H 805030 6 2020/06 0,391 5 2126/540 H 906030 6 2020/06 0,431 5 2126/545 H 10070 30 6 2020/06 0,461 5 77 Cilindri sagomati (6 perni) Profile cylinders (6 pins) Doppio cilindro nichelato con gambo con chiave cantiere - Nickel-plated double cylinder with shank with temporary key CARATTERISTICHE COSTRUTTIVE: Corpo in ottone nichel satinato - Cilindretto in ottone nichelato - Perni in acciaio inox - Controperni in ottone - Molle in bronzo fosforoso Camma DIN disassata di 30° in acciaio autolubrificante - Chiavi piatte reversibili in ottone nichelato con numero di codice. FUNZIONAMENTO: Rotazione della chiave o del pomolo di 360°. PARTI IN DOTAZIONE: 5 chiavi, 1 chiave cantiere, 5 cover blu, 1 cover rossa, vite di fissaggio, carta di proprietà. VARIANTI A RICHIESTA: Impianti speciali KA. CONSTRUCTIVE FEATURES: Satin nickel-plated brass body - Nickel-plated brass plug Stainless steel pins - Brass drivers - Phosphor bronze springs - Steel off center 30° DIN cam - Nichel-plated brass reversible flat keys with code number. WORKING: Turn the key or knob 360°. PROVIDED WITH: 5 keys, 1 temporary key, 5 blue key covers, 1 red key cover, fixing screw, registration card. ON REQUEST: Special keying systems KA. 2126/504 H TK 60 30 30 6 2020/06 0,381 5 2126/520 H TK 65 35 30 6 2020/06 0,391 5 2126/524 H TK 70 40 30 6 2020/06 0,411 5 2126/531 H TK 75 45 30 6 2020/06 0,431 5 2126/535 H TK 80 50 30 6 2020/06 0,441 5 2126/540 H TK 90 60 30 6 2020/06 0,481 5 2126/545 H TK 10070 30 6 2020/06 0,511 5 1 Il cilindro funziona normalmente con la chiave cantiere (TK). The cylinder normally works with the temporary key (TK). 2 Dopo l’inserimento e la rotazione della chiave proprietario, la chiave cantiere viene disattivata. The temporary key is disarmed after that the owner key is inserted and turned. 3 La chiave cantiere non apre più il cilindro. The temporary key doesn’t open the cylinder. 78 LAB MADE IN ITALY COD. Pomoli per cilindro con gambo Knobs for cylinder with shank Pomolo ottone - Brass knob CARATTERISTICHE COSTRUTTIVE: Pomolo in ottone lucido verniciato. FUNZIONAMENTO: / PARTI IN DOTAZIONE: Vite di fissaggio, chiave a brugola. VARIANTI A RICHIESTA: / Per cilindri serie 2126. CONSTRUCTIVE FEATURES: Brass knob. WORKING: / PROVIDED WITH: Fixing screw, allen wrench. ON REQUEST: / For cylinders serie 2126. COD. 02123 0,06- 10 Pomolo cromato - Chrome-plated knob CARATTERISTICHE COSTRUTTIVE: Pomolo in ottone cromato. FUNZIONAMENTO: / PARTI IN DOTAZIONE: Vite di fissaggio, chiave a brugola. VARIANTI A RICHIESTA: / Per cilindri serie 2126. CONSTRUCTIVE FEATURES: Chrome-plated brass knob. WORKING: / PROVIDED WITH: Fixing screw, allen wrench. ON REQUEST: / For cylinders serie 2126. COD. 02123 H 0,06- 10 79 Cilindri sagomati (9 perni) Serie 2320 Profile cylinders (9 pins) Carta di proprietà Registration card 9 perni in acciaio inox 9 stainless steel pins Chiave piatta reversibile con collo allungato Long neck reversible flat key Resistente alla spinta Push resistant Resistente allo strappo Tear resistant Resistente al grimaldello Picklock resistant Resistente al trapano Drill resistant Costruiti secondo i parametri della norma UNI EN 1303:2005 Durabilità: grado 6 (100.000 cicli) Sicurezza della chiave: grado 6 (oltre 300.000 combinazioni) Sistemistica: per 1 sistema MK (con alto livello di sicurezza) = 20.000 possibili cifrature Manufactured in accordance with parameters of standard UNI EN 1303:2005 Durability: grade 6 (100.000 cycles) Security of the key: grade 6 (over 300.000 combinations) Master keying potential: for 1 MK system (with high security level) = 20.000 possible combinations 80 Cilindri sagomati (9 perni) Profile cylinders (9 pins) Doppio cilindro nichelato - Nickel-plated double cylinder CARATTERISTICHE COSTRUTTIVE: Corpo in ottone nichel satinato con spine antitrapano e inserto antistrappo - Cilindretti in ottone nichelato con sfere antitrapano - Perni in acciaio inox - Controperni in ottone - Molle in bronzo fosforoso - Camma DIN disassata di 30° in acciaio autolubrificante - Chiavi piatte reversibili in ottone nichelato con numero di codice. FUNZIONAMENTO: Rotazione della chiave di 360° - Le chiavi sono dipendenti e non possono azionare il cilindro se dall’altro lato é stata inserita e ruotata la chiave. PARTI IN DOTAZIONE: 5 chiavi, 5 cover blu, vite di fissaggio, carta di proprietà. VARIANTI A RICHIESTA: Impianti speciali KA-MK-GMK-CL. CONSTRUCTIVE FEATURES: Satin nickel-plated brass body with steel drill resistant pins and tear resistant insert - Nickel-plated brass plugs with steel drill resistant balls - Stainless steel pins - Brass drivers - Phosphor bronze springs - Steel off center 30° DIN cam - Nichel-plated brass reversible flat keys with code number. WORKING: Turn the key 360° - The keys are dependent and cannot operate on the cylinder if on the other side the key was inserted and turned. PROVIDED WITH: 5 keys, 5 blue key covers, fixing screw, registration card. ON REQUEST: Special keying systems KA-MK-GMK-CL. LAB MADE IN ITALY COD. 2320/504 H603030 9 2020/06 0,291 5 2320/506 H703535 9 2020/06 0,321 5 2320/508 H804040 9 2020/06 0,351 5 2320/511 H653035 9 2020/06 0,301 5 2320/514 H703040 9 2020/06 0,321 5 2320/515 H753045 9 2020/06 0,341 5 2320/516 H753540 9 2020/06 0,341 5 2320/517 H803545 9 2020/06 0,351 5 2320/518 H803050 9 2020/06 0,351 5 2320/519 H854045 9 2020/06 0,371 5 2320/520 H904050 9 2020/06 0,391 5 2320/521 H904545 9 2020/06 0,391 5 2320/522 H100 50 50 9 2020/06 0,42 1 2320/523 H853055 9 2020/06 0,371 5 5 2320/524 H903060 9 2020/06 0,391 5 2320/525 H953065 9 2020/06 0,411 5 2320/526 H100 30 70 9 2020/06 0,42 1 5 5 2320/527 H110 30 80 9 2020/06 0,45 1 2320/528 H853550 9 2020/06 0,371 5 2320/529 H903555 9 2020/06 0,391 5 2320/530 H953560 9 2020/06 0,411 5 2320/531 H100 35 65 9 2020/06 0,42 1 2320/532 H954055 9 2020/06 0,411 5 2320/533 H100 40 60 9 2020/06 0,42 1 5 5 2320/534 H110 40 70 9 2020/06 0,45 1 5 2320/535 H120 40 80 9 2020/06 0,48 1 5 2320/536 H954550 9 2020/06 0,411 5 2320/537 H100 45 55 9 2020/06 0,42 1 5 2320/538 H110 50 60 9 2020/06 0,45 1 5 2320/539 H120 60 60 9 2020/06 0,48 1 5 81 Cilindri sagomati (9 perni) Profile cylinders (9 pins) Mezzo cilindro nichelato - Nickel-plated half cylinder CARATTERISTICHE COSTRUTTIVE: Corpo in ottone nichel satinato con spina antitrapano - Cilindretto in ottone nichelato con sfere antitrapano - Perni in acciaio inox - Controperni in ottone - Molle in bronzo fosforoso - Camma DIN disassata di 30° in acciaio autolubrificante - Chiavi piatte reversibili in ottone nichelato con numero di codice. FUNZIONAMENTO: Rotazione della chiave di 360°. PARTI IN DOTAZIONE: 5 chiavi, 5 cover blu, vite di fissaggio, carta di proprietà. VARIANTI A RICHIESTA: Impianti speciali KA-MK-GMK-CL. CONSTRUCTIVE FEATURES: Satin nickel-plated brass body with steel drill resistant pin - Nickel-plated brass plug with steel drill resistant balls - Stainless steel pins - Brass drivers - Phosphor bronze springs - Steel off center 30° DIN cam - Nichel-plated brass reversible flat keys with code number. WORKING: Turn the key 360°. PROVIDED WITH: 5 keys, 5 blue key covers, fixing screw, registration card. ON REQUEST: Special keying systems KA-MK-GMK-CL. 82 LAB MADE IN ITALY COD. 2321/504 H40 30 10 9 2020/06 0,21 1 5 2321/506 H45 35 10 9 2020/06 0,23 1 5 2321/508 H50 40 10 9 2020/06 0,25 1 5 2321/515 H55 45 10 9 2020/06 0,27 1 5 2321/518 H60 50 10 9 2020/06 0,29 1 5 2321/523 H65 55 10 9 2020/06 0,30 1 5 2321/524 H70 60 10 9 2020/06 0,32 1 5 2321/525 H75 65 10 9 2020/06 0,34 1 5 2321/526 H80 70 10 9 2020/06 0,35 1 5 2321/527 H90 80 10 9 2020/06 0,39 1 5 Cilindri sagomati (9 perni) Profile cylinders (9 pins) Doppio cilindro nichelato con pomolo - Nickel-plated double cylinder with knob CARATTERISTICHE COSTRUTTIVE: Corpo in ottone nichel satinato con spina antitrapano e inserto antistrappo - Cilindretto in ottone nichelato con sfere antitrapano - Perni in acciaio inox - Controperni in ottone - Molle in bronzo fosforoso - Camma DIN disassata di 30° in acciaio autolubrificante - Pomolo in ottone cromato - Chiavi piatte reversibili in ottone nichelato con numero di codice. FUNZIONAMENTO: Rotazione della chiave o del pomolo di 360°. PARTI IN DOTAZIONE: 5 chiavi, 5 cover blu, vite di fissaggio, carta di proprietà. VARIANTI A RICHIESTA: Impianti speciali KA-MK-GMK-CL. CONSTRUCTIVE FEATURES: Satin nickel-plated brass body with steel drill resistant pin and tear resistant insert - Nickel-plated brass plug with steel drill resistant balls Stainless steel pins - Brass drivers - Phosphor bronze springs - Steel off center 30° DIN cam - Chrome-plated brass knob - Nichel-plated brass reversible flat keys with code number. WORKING: Turn the key or knob 360°. PROVIDED WITH: 5 keys, 5 blue key covers, fixing screw, registration card. ON REQUEST: Special keying systems KA-MK-GMK-CL. LAB MADE IN ITALY COD. 2323/504 H60 30 30 9 2020/06 0,37 1 5 2323/507 H70 35 35 9 2020/06 0,40 1 5 2323/510 H80 40 40 9 2020/06 0,43 1 5 2323/513 H65 30 35 9 2020/06 0,38 1 5 2323/514 H70 30 40 9 2020/06 0,40 1 5 2323/515 H75 30 45 9 2020/06 0,42 1 5 2323/516 H80 30 50 9 2020/06 0,43 1 5 2323/517 H90 30 60 9 2020/06 0,47 1 5 2323/518 H100 30 70 9 2020/06 0,50 1 5 2323/519 H110 30 80 9 2020/06 0,53 1 5 2323/520 H65 35 30 9 2020/06 0,38 1 5 2323/521 H75 35 40 9 2020/06 0,42 1 5 2323/522 H80 35 45 9 2020/06 0,43 1 5 2323/523 H85 35 50 9 2020/06 0,45 1 5 2323/524 H70 40 30 9 2020/06 0,40 1 5 2323/525 H75 40 35 9 2020/06 0,42 1 5 2323/526 H85 40 45 9 2020/06 0,45 1 5 2323/527 H90 40 50 9 2020/06 0,47 1 5 2323/528 H100 40 60 9 2020/06 0,50 1 5 2323/529 H110 40 70 9 2020/06 0,53 1 5 9 2020/06 0,56 1 5 2323/531 H75 45 30 9 2323/530 H120 40 80 2020/06 0,42 1 5 2323/532 H80 45 35 9 2020/06 0,43 1 5 2323/533 H85 45 40 9 2020/06 0,45 1 5 2323/534 H90 45 45 9 2020/06 0,47 1 5 2323/535 H80 50 30 9 2020/06 0,43 1 5 2323/536 H85 50 35 9 2020/06 0,45 1 5 2323/537 H90 50 40 9 2020/06 0,47 1 5 2323/538 H100 50 50 2020/06 0,50 1 5 9 2323/539 H110 50 60 9 2020/06 0,53 1 5 2323/540 H90 60 30 9 2020/06 0,47 1 5 2323/541 H95 60 35 9 2020/06 0,49 1 5 2323/542 H100 60 40 9 2020/06 0,50 1 5 2323/543 H110 60 50 9 2020/06 0,53 1 5 2323/544 H120 60 60 9 2020/06 0,56 1 5 2323/545 H100 70 30 9 2020/06 0,50 1 5 83 Cilindri a spillo Cross key cylinders Cilindro a spillo con supporto - Cross key cylinder with support CARATTERISTICHE COSTRUTTIVE: Supporto in lega speciale zincata - Corpo, cilindretto e perni in ottone - Molle in acciaio - Camma OMEC in acciaio inox - Chiavi in acciaio nichelato. FUNZIONAMENTO: Rotazione della chiave di 360° - Le chiavi sono dipendenti e non possono azionare il cilindro se dall’altro lato é stata inserita e ruotata la chiave. PARTI IN DOTAZIONE: 3 chiavi, 2 borchie cod. 0441 N, viti di fissaggio, istruzioni di montaggio. VARIANTI A RICHIESTA: Impianti speciali KA. CONSTRUCTIVE FEATURES: Zinc-plated special alloy support - Brass body, plug and pins - Steel springs - Stainless steel OMEC cam - Nichel-plated steel keys. WORKING: Turn the key 360° - The keys are dependent and cannot operate on the cylinder if on the other side the key was inserted and turned. PROVIDED WITH: 3 keys, 2 roses cod. 0441 N, fixing screws, assembling instructions. ON REQUEST: Special keying systems KA. Per serrature serie cod. - For locks series cod. 11061-1160-1161-1165-1166-1167-1168-1170-1171-1175-1176-1177-1178-1180-1181-11851186-1187-1188-1260-1261-1265-1266-1267-1268-1270-1271-1275-1276-1277-1278-12801281-1285-1286-1287-1288-1430-1431-1435-1436-1437-14379-1438-1439-1440-1441-14451446-1447-14479-1448-1449-1450-1451-1455-1456-1457-14579-1458-1459-1460-14611462-1465-1466-1467-1468-1470-1471-1472-1475-1476-1477-1478-1480-1481-1482-14851486-1487-1488-1490-1491-1492-1495-1496-1531-1560-1561-1565-1566-1567-1568-15701571-1575-1576-1577-1578-1580-1581-1585-1586-1587-1588-1660-1661-1665-1666-16671668-1670-1671-1675-1676-1677-1678-1680-1681-1685-1686-1687-1688-4430-4431-44354436-4437-44379-4438-4439-4440-4441-4445-4446-4447-44479-4448-4449-4450-44514455-4456-4457-44579-4458-4459-4460-4461-4462-4465-4466-4467-4468-4470-4471-44724475-4476-4477-4478-4480-4481-4482-4485-4486-4487-4488-4490-4491-4492-4495-4496 COD. 40526 4100 0,10 10 - 4052/164101 (lunga-long) 0,1210 - Cilindro a spillo con supporto - Cross key cylinder with support CARATTERISTICHE COSTRUTTIVE: Supporto in lega speciale zincata - Corpo, cilindretto e perni in ottone - Molle in acciaio - Camma OMEC in acciaio inox - Chiavi in acciaio nichelato. FUNZIONAMENTO: Rotazione della chiave di 360° - Le chiavi sono dipendenti e non possono azionare il cilindro se dall’altro lato é stata inserita e ruotata la chiave. PARTI IN DOTAZIONE: 3 chiavi, 2 borchie cod. 0441 N, tappo frontale, viti di fissaggio. VARIANTI A RICHIESTA: Impianti speciali KA. CONSTRUCTIVE FEATURES: Zinc-plated special alloy support- Brass body, plug and pins - Steel springs - Stainless steel OMEC cam - Nichel-plated steel keys. WORKING: Turn the key 360° - The keys are dependent and cannot operate on the cylinder if on the other side the key was inserted and turned. PROVIDED WITH: 3 keys, 2 roses cod. 0441 N, forend plug, fixing screws. ON REQUEST: Special keying systems KA. Per serrature serie cod. - For locks series cod. 4320-4328-4330-4335-4338-4339-4340-4350-4355-4356-4530-4531-4535 COD. 40546 4100 0,10 10 - 4054/164101 (lunga-long) 0,1210 - 84 Cilindri a spillo Cross key cylinders Cilindro a spillo con supporto - Cross key cylinder with support CARATTERISTICHE COSTRUTTIVE: Supporto in lega speciale zincata - Corpo, cilindretto e perni in ottone - Molle in acciaio - Camma OMEC in acciaio inox - Chiavi in acciaio nichelato. FUNZIONAMENTO: Rotazione della chiave di 360° - Le chiavi sono dipendenti e non possono azionare il cilindro se dall’altro lato é stata inserita e ruotata la chiave. PARTI IN DOTAZIONE: 3 chiavi, 2 borchie cod. 0441 N, istruzioni di montaggio. VARIANTI A RICHIESTA: Impianti speciali KA. CONSTRUCTIVE FEATURES: Zinc-plated special alloy support - Brass body, plug and pins - Steel springs - Stainless steel OMEC cam - Nichel-plated steel keys. WORKING: Turn the key 360° - The keys are dependent and cannot operate on the cylinder if on the other side the key was inserted and turned. PROVIDED WITH: 3 keys, 2 roses cod. 0441 N, assembling instructions. ON REQUEST: Special keying systems KA. Per serrature serie cod. - For locks series cod. 11140-11141-11145-11148-11170-11171-11175-11178-1940-1941-1945-1948-1970-1971-19751978-41140-41141-41145-41148-41170-41171-41175-41178-4940-4941-4945-4948-49704971-4975-4978 COD. 40626 4100 0,12 10 - 4062/164101 (lunga-long) 0,1410 - Cilindro a spillo con supporto - Cross key cylinder with support CARATTERISTICHE COSTRUTTIVE: Supporto in lega speciale zincata - Corpo, cilindretto e perni in ottone - Molle in acciaio - Camma OMEC in acciaio inox - Chiavi in acciaio nichelato. FUNZIONAMENTO: Rotazione della chiave di 360° - Le chiavi sono dipendenti e non possono azionare il cilindro se dall’altro lato é stata inserita e ruotata la chiave. PARTI IN DOTAZIONE: 3 chiavi, 2 borchie cod. 0441 N, istruzioni di montaggio. VARIANTI A RICHIESTA: Impianti speciali KA. CONSTRUCTIVE FEATURES: Zinc-plated special alloy support - Brass body, plug and pins - Steel springs - Stainless steel OMEC cam - Nichel-plated steel keys. WORKING: Turn the key 360° - The keys are dependent and cannot operate on the cylinder if on the other side the key was inserted and turned. PROVIDED WITH: 3 keys, 2 roses cod. 0441 N, assembling instructions. ON REQUEST: Special keying systems KA. Per serrature serie cod. - For locks series cod. 1473-4473 COD. 40726 4100 0,10 10 - 4072/164101 (lunga-long) 0,1210 - 85 SERRATURE PER PROFILI IN ALLUMINIO LOCKS FOR ALUMINIUM PROFILES - SERRATURE PER FASCE Pag. 89 - HORIZONTAL LOCKS -meccaniche - mechanical version Pag. 90 - Pag. 102 elettriche - electric version - di sicurezza meccaniche - security mechanical version Pag. 106 - di sicurezza elettriche - security electric version Pag. 113 - a doppia mappa meccaniche - double-bit key mechanical version Pag. 115 - a doppia mappa elettriche - double-bit key electric version Pag. 123 - SERRATURE PER MONTANTI Pag. 125 - VERTICAL LOCKS -meccaniche - mechanical version Pag. 127 - di sicurezza meccaniche - security mechanical version Pag. 142 - di sicurezza elettriche - security electric version Pag. 153 - di sicurezza meccaniche ad ingranaggi - security mechanical version with gear mechanism movements - KIT PER CHIUSURE SUPPLEMENTARI - KITS FOR ADDITIONAL LOCKING POINTS - SERRATURE MULTIPUNTO PER MONTANTI - VERTICAL MULTI-POINT LOCKS Pag. 159 Pag. 167 Pag. 177 -meccaniche - mechanical version Pag. 179 -elettriche - electric version Pag. 188 - meccaniche ad ingranaggi - mechanical version with gear mechanism movements Pag. 193 - BLOCCHETTI DI CHIUSURA Pag. 207 - DEAD BOLT RIM LOCKS 87 88 Serrature per fasce Horizontal locks Catenaccio e scrocco - Dead and latch bolt CARATTERISTICHE COSTRUTTIVE: Scatola e coperchio in acciaio zincato e plastificato - Frontale in acciaio nichelato e cromato COD. - Catenaccio in acciaio nichelato - Scrocco in ottone nichelato mm.8. Ingegno maniglia in ottone foro 370 FUNZIONAMENTO: Catenaccio comandato dalla chiave - Scrocco comandato dalla chiave o dalla maniglia. 370/F22 MANO: Reversibile. 770 PARTI IN DOTAZIONE: Vite cilindro. E F A B M SCS mandate throws 60 1613347 2810,5- 3 0,511 10 60 2213347 2810,5- 3 0,531 10 70 1615367 2810,5- 3 0,551 10 70 2215367 2810,5- 3 0,571 10 CONSTRUCTIVE FEATURES: Zinc and plastic plated steel case and 770/F22 cover - Nickel and chromium plated steel forend - Nickel-plated 770-TT/F157014,6153 67 3315,56 3 0,56 1 10 steel dead bolt - Nickel-plated brass latch bolt - Brass square mm.8. spindle device 870 80 1616367 2810,5- 3 0,621 10 WORKING: Key driven dead bolt - Handle or key driven latch bolt. 870/F22 80 2216367 2810,5- 3 0,641 10 HAND: Reversible. PROVIDED WITH: Cylinder screw. 870-TT/F158014,6163 67 3315,56 3 0,63 1 10 Catenaccio - Dead bolt CARATTERISTICHE COSTRUTTIVE: Scatola e coperchio in acciaio zincato e plastificato - Frontale in acciaio nichelato e cromato - COD. Catenaccio in acciaio nichelato. FUNZIONAMENTO: Catenaccio comandato dalla chiave. 371 MANO: Unica. PARTI IN DOTAZIONE: Vite cilindro. 371/F22 CONSTRUCTIVE FEATURES: Zinc and plastic plated steel case and cover - Nickel and chromium plated steel forend - Nickel-plated steel dead bolt. WORKING: Key driven dead bolt. HAND: No hand. PROVIDED WITH: Cylinder screw. 90 E F A BM mandate throws 60 1613347 28 3 0,381 10 60 2213347 28 3 0,401 10 771 70 1615367 28 3 0,431 10 771/F22 70 2215367 28 3 0,451 10 871 80 1616367 28 3 0,501 10 871/F22 80 2216367 28 3 0,521 10 Serrature per fasce Horizontal locks Catenaccio e rullo regolabile - Dead and adjustable roller bolt CARATTERISTICHE COSTRUTTIVE: Scatola e coperchio in acciaio zincato e plastificato - Frontale in acciaio nichelato e cromato - COD. Catenaccio in acciaio nichelato - Rullo in ottone nichelato. FUNZIONAMENTO: Catenaccio comandato dalla chiave - Rullo 375 comandato a pressione o dalla chiave. MANO: Unica. 375/F22 PARTI IN DOTAZIONE: Vite cilindro. 775 CONSTRUCTIVE FEATURES: Zinc and plastic plated steel case and cover - Nickel and chromium plated steel forend - Nickel-plated 775/F22 steel dead bolt - Nickel-plated brass roller bolt. 875 WORKING: Key driven dead bolt - Pressure or key driven roller bolt. 875/F22 HAND: No hand. PROVIDED WITH: Cylinder screw. Gancio E F A BM mandate throws 60 1613347 28 3 0,451 10 60 2213347 28 3 0,471 10 70 1615367 28 3 0,491 10 70 2215367 28 3 0,511 10 80 1616367 28 3 0,561 10 80 2216367 28 3 0,581 10 - Hook bolt CARATTERISTICHE COSTRUTTIVE: Scatola e coperchio in acciaio zincato e plastificato - Frontale in acciaio nichelato e COD. cromato - Gancio in acciaio nichelato. FUNZIONAMENTO: Gancio comandato dalla chiave. 376 MANO: Unica. PARTI IN DOTAZIONE: Vite cilindro. 376/F22 CONSTRUCTIVE FEATURES: Zinc and plastic plated steel case and 776 cover - Nickel and chromium plated steel forend - Nickel-plated 776/F22 steel hook bolt. WORKING: Key driven hook bolt. HAND: No hand. PROVIDED WITH: Cylinder screw. EFAB mandate throws 60 1613347 1 0,431 10 60 2213347 1 0,451 10 70 1615367 1 0,481 10 70 2215367 1 0,501 10 91 Serrature per fasce Horizontal locks Scrocco regolabile con mandate - Adjustable latch bolt Scrocco intercambiabile con rullo cod. 0385 - Latch with throws bolt interchangeable into roller bolt cod. 0385 NEW CARATTERISTICHE COSTRUTTIVE: Scatola e coperchio in acciaio zincato e plastificato - Frontale in acciaio nichelato e COD. cromato - Scrocco in lega speciale nichelata - Ingegno maniglia in mm.8. lega speciale zincata foro 380 FUNZIONAMENTO: Mandate comandate dalla chiave - Scrocco comandato dalla chiave o dalla maniglia. 380/F22 MANO: Reversibile. 780 PARTI IN DOTAZIONE: Vite cilindro. E F A BMS max. max. mandate throws 60 1613347 33 6 2 0,441 10 60 2213347 33 6 2 0,461 10 70 1615367 33 6 2 0,481 10 70 2215367 33 6 2 0,501 10 CONSTRUCTIVE FEATURES: Zinc and plastic plated steel 780/F22 case and cover - Nickel and chromium plated steel forend - 780-TT/F15 70 14,6153 67 33 6 2 0,48 1 10 Special nickel-plated alloy latch bolt - Special zinc-plated alloy square spindle device mm.8. 880 80 1616367 33 6 2 0,511 10 WORKING: Key driven throws - Handle or key driven latch bolt. 880/F22 80 2216367 33 6 2 0,531 10 HAND: Reversible. PROVIDED WITH: Cylinder screw. 880-TT/F15 80 14,6163 67 33 6 2 0,51 1 10 NEW Meccanismo di esclusione seconda mandata Second throw exclusion device Scrocco regolabile ~ 5 mm Adjustable latch bolt ~ 5 mm Scrocco e rullo intercambiabili Interchangeable latch bolt/roller bolt Rullo cod. 0385 Roller bolt cod. 0385 92 Serrature per fasce Horizontal locks Catenaccio regolabile - Adjustable dead bolt NEW CARATTERISTICHE COSTRUTTIVE: Scatola e coperchio in acciaio zincato e plastificato - Frontale in acciaio nichelato e COD. cromato - Catenaccio in lega speciale nichelata. FUNZIONAMENTO: Catenaccio comandato dalla chiave. 381 MANO: Unica. PARTI IN DOTAZIONE: Vite cilindro. 381/F22 CONSTRUCTIVE FEATURES: Zinc and plastic plated steel case and cover - Nickel and chromium plated steel forend Special nickel-plated alloy dead bolt. WORKING: Key driven dead bolt. HAND: No hand. PROVIDED WITH: Cylinder screw. Catenaccio e scrocco - E F A BM max. mandate throws 60 1613347 23 2 0,401 10 60 2213347 23 2 0,421 10 781 70 1615367 23 2 0,441 10 781/F22 70 2215367 23 2 0,461 10 881 80 1616367 23 2 0,481 10 881/F22 80 2216367 23 2 0,501 10 Dead and latch bolt AD ESAURIMENTO END OF LINE CARATTERISTICHE COSTRUTTIVE: Scatola e coperchio in acciaio zincato e plastificato - Frontale in acciaio nichelato e COD. cromato - Catenaccio e scrocco in ottone nichelato - Ingegno mm.8. maniglia in ottone foro 382 FUNZIONAMENTO: Catenaccio comandato dalla chiave - Scrocco comandato dalla chiave o dalla maniglia. 382/F22 MANO: Reversibile. 782 PARTI IN DOTAZIONE: Vite cilindro. E F A B M SCS mandate throws 60 1613347 1910,5- 2 0,471 10 60 2213347 1910,5- 2 0,491 10 70 1615367 2810,5- 3 0,531 10 70 2215367 CONSTRUCTIVE FEATURES: Zinc and plastic plated steel case and 782/F22 cover - Nickel and chromium plated steel forend - Nickel-plated 782-TT/F157014,6153 67 brass dead and latch bolt - Brass square spindle device mm.8. WORKING: Key driven dead bolt - Handle or key driven latch bolt. 882 80 1616367 HAND: Reversible. 882/F22 80 2216367 PROVIDED WITH: Cylinder screw. 2810,5- 3 0,551 10 3315,56 3 0,54 1 10 2810,5- 3 0,561 10 2810,5- 3 0,581 10 882-TT/F158014,6163 67 3315,56 3 0,57 1 10 93 Serrature per fasce Horizontal locks Rullo regolabile con mandate - Adjustable roller bolt with throws NEW CARATTERISTICHE COSTRUTTIVE: Scatola e coperchio in acciaio zincato e plastificato - Frontale in acciaio nichelato e cromato - COD. Rullo in ottone nichelato. FUNZIONAMENTO: Mandate comandate dalla chiave - Rullo 385 comandato a pressione o dalla chiave. MANO: Unica. 385/F22 PARTI IN DOTAZIONE: Vite cilindro. 785 CONSTRUCTIVE FEATURES: Zinc and plastic plated steel case and cover - Nickel and chromium plated steel forend - Nickel-plated 785/F22 brass roller bolt. 885 WORKING: Key driven throws - Pressure or key driven roller bolt. HAND: No hand. 885/F22 PROVIDED WITH: Cylinder screw. Gancio - mandate throws max. 60 1613347 28 2 0,411 10 60 2213347 28 2 0,431 10 70 1615367 28 2 0,471 10 70 2215367 28 2 0,491 10 80 1616367 28 2 0,471 10 80 2216367 28 2 0,491 10 Hook bolt CARATTERISTICHE COSTRUTTIVE: Scatola e coperchio in acciaio zincato e plastificato - Frontale in acciaio nichelato e cromato - COD. Gancio in acciaio nichelato. FUNZIONAMENTO: Gancio comandato dalla chiave. 386 MANO: Unica. PARTI IN DOTAZIONE: Vite cilindro. 386/F22 CONSTRUCTIVE FEATURES: Zinc and plastic plated steel case and 786 cover - Nickel and chromium plated steel forend - Nickel-plated 786/F22 steel hook bolt. WORKING: Key driven hook bolt. HAND: No hand. PROVIDED WITH: Cylinder screw. 94 E F A BM EFAB mandate throws 60 1613347 1 0,381 10 60 2213347 1 0,401 10 70 1615367 1 0,411 10 70 2215367 1 0,431 10 Serrature per fasce Horizontal locks Scrocco regolabile con mandate - Adjustable latch bolt with throws Scrocco intercambiabile con rullo cod. 0395 - Latch bolt interchangeable into roller bolt cod. 0395 CARATTERISTICHE COSTRUTTIVE: Scatola e coperchio in acciaio zincato e plastificato - Frontale in acciaio nichelato e cromato COD. - Scrocco in lega speciale nichelata - Ingegno maniglia in lega mm.8. speciale zincata foro 390 FUNZIONAMENTO: Mandate comandate dalla chiave - Scrocco comandato dalla chiave o dalla maniglia. 390/F22 MANO: Reversibile. 790 PARTI IN DOTAZIONE: Vite cilindro. 60 1613347 33 6 2 0,361 10 790/F22 70 2215367 33 6 2 0,411 10 CONSTRUCTIVE FEATURES: Zinc and plastic plated steel case and cover - Nickel and chromium plated steel forend - Special nickelplated alloy latch bolt - Special zinc-plated alloy square spindle device mm.8. WORKING: Key driven throws - Handle or key driven latch bolt. HAND: Reversible. PROVIDED WITH: Cylinder screw. E F A BMS max. max. mandate throws 60 2213347 33 6 2 0,381 10 70 1615367 33 6 2 0,391 10 790-TT/F15 70 14,6153 67 33 6 2 0,39 1 10 890 80 1616367 33 6 2 0,401 10 890/F22 80 2216367 33 6 2 0,421 10 890-TT/F15 80 14,6163 67 33 6 2 0,40 1 10 990 90 1617367 33 6 2 0,421 - 990/F22 90 2217367 33 6 2 0,441 - 990-TT/F15 90 14,6173 67 33 6 2 0,42 1 - Meccanismo di esclusione seconda mandata Second throw exclusion device Scrocco regolabile ~ 5 mm Adjustable latch bolt ~ 5 mm Scrocco e rullo intercambiabili Interchangeable latch bolt/roller bolt Rullo cod. 0395 Roller bolt cod. 0395 95 Serrature per fasce Horizontal locks Catenaccio regolabile - Adjustable dead bolt CARATTERISTICHE COSTRUTTIVE: Scatola e coperchio in acciaio zincato e plastificato - Frontale in acciaio nichelato e cromato - COD. Catenaccio in lega speciale nichelata. FUNZIONAMENTO: Catenaccio comandato dalla chiave. 391 MANO: Unica. PARTI IN DOTAZIONE: Vite cilindro. 391/F22 CONSTRUCTIVE FEATURES: Zinc and plastic plated steel case and cover - Nickel and chromium plated steel forend - Special nickelplated alloy dead bolt. WORKING: Key driven dead bolt. HAND: No hand. PROVIDED WITH: Cylinder screw. Rullo regolabile con mandate - max. mandate throws 60 1613347 23 2 0,331 10 60 2213347 23 2 0,351 10 791 70 1615367 23 2 0,361 10 791/F22 70 2215367 23 2 0,381 10 891 80 1616367 23 2 0,401 10 891/F22 80 2216367 23 2 0,421 10 991 90 1617367 23 2 0,481 - 991/F22 90 2217367 23 2 0,501 - Adjustable roller bolt with throws CARATTERISTICHE COSTRUTTIVE: Scatola e coperchio in acciaio zincato e plastificato - Frontale in acciaio nichelato e cromato - COD. Rullo in ottone nichelato. FUNZIONAMENTO: Mandate comandate dalla chiave - Rullo 395 comandato a pressione o dalla chiave. MANO: Unica. 395/F22 PARTI IN DOTAZIONE: Vite cilindro. 795 CONSTRUCTIVE FEATURES: Zinc and plastic plated steel case and cover - Nickel and chromium plated steel forend - Nickel-plated 795/F22 brass roller bolt. 895 WORKING: Key driven throws - Pressure or key driven roller bolt. 895/F22 HAND: No hand. PROVIDED WITH: Cylinder screw. 96 E F A BM E F A BM max. mandate throws 60 1613347 28 2 0,341 10 60 2213347 28 2 0,361 10 70 1615367 28 2 0,381 10 70 2215367 28 2 0,401 10 80 1616367 28 2 0,381 10 80 2216367 28 2 0,401 10 995 90 1617367 28 2 0,391 - 995/F22 90 2217367 28 2 0,411 - Serrature per fasce Horizontal locks Gancio - Hook bolt CARATTERISTICHE COSTRUTTIVE: Scatola e coperchio in acciaio zincato e plastificato - Frontale in acciaio nichelato e cromato - COD. Gancio in acciaio nichelato. FUNZIONAMENTO: Gancio comandato dalla chiave. 396 MANO: Unica. PARTI IN DOTAZIONE: Vite cilindro. 396/F22 CONSTRUCTIVE FEATURES: Zinc and plastic plated steel case and 796 cover - Nickel and chromium plated steel forend - Nickel-plated 796/F22 steel hook bolt. WORKING: Key driven hook bolt. HAND: No hand. PROVIDED WITH: Cylinder screw. EFAB mandate throws 60 1613347 1 0,301 10 60 2213347 1 0,321 10 70 1615367 1 0,331 10 70 2215367 1 0,351 10 97 Serrature per fasce Horizontal locks Catenaccio e scrocco - Dead and latch bolt CARATTERISTICHE COSTRUTTIVE: Scatola e coperchio in acciaio zincato e plastificato - Frontale in acciaio nichelato e cromato COD. - Catenaccio in acciaio nichelato - Scrocco in ottone nichelato mm.8. Ingegno maniglia in ottone foro 1770 FUNZIONAMENTO: Catenaccio comandato dalla chiave - Scrocco comandato dalla chiave o dalla maniglia. 1770/F22 MANO: Reversibile. PARTI IN DOTAZIONE: Vite cilindro. E F A B MSC mandate throws 70 1615367 3110,5 3 0,581 10 70 2215367 3110,5 3 0,601 10 CONSTRUCTIVE FEATURES: Zinc and plastic plated steel case and cover - Nickel and chromium plated steel forend - Nickel-plated steel dead bolt - Nickel-plated brass latch bolt - Brass square mm.8. spindle device WORKING: Key driven dead bolt - Handle or key driven latch bolt. HAND: Reversible. PROVIDED WITH: Cylinder screw. Catenaccio - Dead bolt CARATTERISTICHE COSTRUTTIVE: Scatola e coperchio in acciaio zincato e plastificato - Frontale in acciaio nichelato e cromato - COD. Catenaccio in acciaio nichelato. FUNZIONAMENTO: Catenaccio comandato dalla chiave. 1771 MANO: Unica. PARTI IN DOTAZIONE: Vite cilindro. 1771/F22 CONSTRUCTIVE FEATURES: Zinc and plastic plated steel case and cover - Nickel and chromium plated steel forend - Nickel-plated steel dead bolt. WORKING: Key driven dead bolt. HAND: No hand. PROVIDED WITH: Cylinder screw. 98 E F A BM mandate throws 70 1615367 31 3 0,511 10 70 2215367 31 3 0,531 10 Serrature per fasce Horizontal locks Catenaccio e rullo regolabile - Dead and adjustable roller bolt CARATTERISTICHE COSTRUTTIVE: Scatola e coperchio in acciaio zincato e plastificato - Frontale in acciaio nichelato e cromato - COD. Catenaccio in acciaio nichelato - Rullo in ottone nichelato. FUNZIONAMENTO: Catenaccio comandato dalla chiave - Rullo 1775 comandato a pressione o dalla chiave. MANO: Unica. 1775/F22 PARTI IN DOTAZIONE: Vite cilindro. E F A BM mandate throws 70 1615367 31 3 0,531 10 70 2215367 31 3 0,551 10 CONSTRUCTIVE FEATURES: Zinc and plastic plated steel case and cover - Nickel and chromium plated steel forend - Nickel-plated steel dead bolt - Nickel-plated brass roller bolt. WORKING: Key driven dead bolt - Pressure or key driven roller bolt. HAND: No hand. PROVIDED WITH: Cylinder screw. Gancio - Hook bolt CARATTERISTICHE COSTRUTTIVE: Scatola e coperchio in acciaio zincato e plastificato - Frontale in acciaio nichelato e cromato - COD. Gancio in acciaio nichelato. FUNZIONAMENTO: Gancio comandato dalla chiave. 1776 MANO: Unica. PARTI IN DOTAZIONE: Vite cilindro. 1776/F22 EFAB mandate throws 70 1615367 1 0,511 10 70 2215367 1 0,531 10 CONSTRUCTIVE FEATURES: Zinc and plastic plated steel case and cover - Nickel and chromium plated steel forend - Nickel-plated steel hook bolt. WORKING: Key driven hook bolt. HAND: No hand. PROVIDED WITH: Cylinder screw. 99 Serrature per fasce Horizontal locks Scrocco regolabile con mandate - Adjustable latch bolt with throws Scrocco intercambiabile con rullo cod. 0385 - Latch bolt interchangeable into roller bolt cod. 0385 NEW CARATTERISTICHE COSTRUTTIVE: Scatola e coperchio in acciaio zincato e plastificato - Frontale in acciaio nichelato e cromato COD. - Scrocco in lega speciale nichelata - Ingegno maniglia in lega mm.8. speciale zincata foro 1780 FUNZIONAMENTO: Mandate comandate dalla chiave - Scrocco comandato dalla chiave o dalla maniglia. 1780/F22 MANO: Reversibile. PARTI IN DOTAZIONE: Vite cilindro. E F A BMS max. Adjustable latch bolt ~ 5 mm Scrocco e rullo intercambiabili Interchangeable latch bolt/roller bolt Rullo cod. 0385 Roller bolt cod. 0385 100 throws 70 2215367 33 6 2 0,521 10 Meccanismo di esclusione seconda mandata Scrocco regolabile ~ 5 mm mandate 70 1615367 33 6 2 0,501 10 CONSTRUCTIVE FEATURES: Zinc and plastic plated steel case and cover - Nickel and chromium plated steel forend - Special nickelplated alloy latch bolt - Special zinc-plated alloy square spindle mm.8. device WORKING: Key driven throws - Handle or key driven latch bolt. HAND: Reversible. PROVIDED WITH: Cylinder screw. NEW max. Second throw exclusion device Serrature per fasce Horizontal locks Catenaccio regolabile - Adjustable dead bolt NEW CARATTERISTICHE COSTRUTTIVE: Scatola e coperchio in acciaio zincato e plastificato - Frontale in acciaio nichelato e cromato - COD. Catenaccio in lega speciale nichelata. FUNZIONAMENTO: Catenaccio comandato dalla chiave. 1781 MANO: Unica. PARTI IN DOTAZIONE: Vite cilindro. 1781/F22 E F A BM max. mandate throws 70 1615367 23 2 0,461 10 70 2215367 23 2 0,481 10 CONSTRUCTIVE FEATURES: Zinc and plastic plated steel case and cover - Nickel and chromium plated steel forend - Special nickelplated alloy dead bolt. WORKING: Key driven dead bolt. HAND: No hand. PROVIDED WITH: Cylinder screw. Rullo regolabile con mandate - Adjustable roller bolt with throws NEW CARATTERISTICHE COSTRUTTIVE: Scatola e coperchio in acciaio zincato e plastificato - Frontale in acciaio nichelato e cromato - COD. Rullo in ottone nichelato. FUNZIONAMENTO: Mandate comandate dalla chiave - Rullo 1785 comandato a pressione o dalla chiave. MANO: Unica. 1785/F22 PARTI IN DOTAZIONE: Vite cilindro. E F A BM max. mandate throws 70 1615367 28 2 0,491 10 70 2215367 28 2 0,511 10 CONSTRUCTIVE FEATURES: Zinc and plastic plated steel case and cover - Nickel and chromium plated steel forend - Nickel-plated brass roller bolt. WORKING: Key driven throws - Pressure or key driven roller bolt. HAND: No hand. PROVIDED WITH: Cylinder screw. 101 Elettroserrature per fasce Horizontal electric locks Scrocco con mandata - Con dispositivo per esclusione mandata Latch bolt with throw - With throw exclusion system CARATTERISTICHE COSTRUTTIVE: Scatola e coperchio in acciaio zincato e plastificato Frontale in acciaio nichelato e cromato - Scrocco in ottone nichelato - Pistone di ricarica mm.8 - Gruppo bobine cod. 033 in acciaio nichelato - Ingegno maniglia in ottone foro (12V-15W a.c.) CE. FUNZIONAMENTO: Mandata comandata dalla chiave - Scrocco comandato dalla chiave, dalla maniglia, dal comando elettrico a distanza o dal pulsante meccanico cod. 058 - Il funzionamento é garantito anche in mancanza di corrente. FERMO A GIORNO: Con il pulsante meccanico cod. 059 é consentito il bloccaggio dell’elettroserratura in posizione di “aperto”. MANO: Reversibile. PARTI IN DOTAZIONE: Vite cilindro, istruzioni di montaggio. CONSTRUCTIVE FEATURES: Zinc and plastic plated steel case and cover - Nickel and chromium plated steel forend - Nickel-plated brass latch bolt - Nickel-plated steel piston - Brass square spindle device mm.8 - Coil set cod. 033 (12V-15W a.c.) CE. WORKING: Key driven throw - Key, handle, remote control or push-button cod. 058 driven latch bolt - Working is assured also without current. HOLD OPEN DEVICE: With push-button cod. 059, it is possible to block the electric lock in its “open” position. HAND: Reversible. PROVIDED WITH: Cylinder screw, assembling instructions. COD. mandate throws 377 60 16 133 4719,584 1 0,55 1 10 377/F22 60 22 133 4719,584 1 0,58 1 10 777 Catenaccio e scrocco (non reversibile) - E F A BMC 70 16 153 6719,578 1 0,59 1 10 777/F22 70 22 153 6719,578 1 0,61 1 10 877 80 16 163 6719,578 1 0,65 1 10 877/F22 80 22 163 6719,578 1 0,67 1 10 Dead and latch bolt (not reversible) CARATTERISTICHE COSTRUTTIVE: Scatola e coperchio in acciaio zincato e plastificato - Frontale in acciaio nichelato e cromato - Catenaccio e pistone di ricarica in acciaio nichelato - Scrocco in ottone nichelato - Ingegno maniglia in ottone foro mm.8 - Gruppo bobine cod. 033 (12V-15W a.c.) CE. FUNZIONAMENTO: Catenaccio comandato dalla chiave - Scrocco comandato dalla chiave, dalla maniglia, dal comando elettrico a distanza o dal pulsante meccanico cod. 058 - Il funzionamento é garantito anche in mancanza di corrente. FERMO A GIORNO: Con il pulsante meccanico cod. 059 é consentito il bloccaggio dell’elettroserratura in posizione di “aperto”. MANO: DX = destra - SX = sinistra. PARTI IN DOTAZIONE: Vite cilindro. CONSTRUCTIVE FEATURES: Zinc and plastic plated steel case and cover - Nickel and chromium plated steel forend -Nickel-plated steel dead bolt and piston - Nickel-plated brass latch bolt - Brass square spindle device mm.8 - Coil set cod. 033 (12V-15W a.c.) CE. WORKING: Key driven dead bolt - Key, handle, remote control or push-button cod. 058 driven latch bolt - Working is assured also without current. HOLD OPEN DEVICE: With push-button cod. 059, it is possible to block the electric lock in its “open” position. HAND: DX = right - SX = left. PROVIDED WITH: Cylinder screw. COD. E F A B MSC mandate throws 378 DX 60 1613347 1910,5 2 0,561 10 378 SX 60 1613347 1910,5 2 0,561 10 378/F22 DX 60 2213347 1910,5 2 0,581 10 378/F22 SX 60 2213347 1910,5 2 0,581 10 102 Elettroserrature per fasce Horizontal electric locks Catenaccio e scrocco - Dead and latch bolt CARATTERISTICHE COSTRUTTIVE: Scatola e coperchio in acciaio zincato e plastificato - Frontale in acciaio nichelato e cromato - Catenaccio e scrocco in ottone nichelato mm.8 - Gruppo Pistone di ricarica in acciaio nichelato - Ingegno maniglia in ottone foro bobine cod. 033 (12V-15W a.c.) CE. FUNZIONAMENTO: Catenaccio comandato dalla chiave - Scrocco comandato dalla chiave, dalla maniglia, dal comando elettrico a distanza o dal pulsante meccanico cod. 058 - Il funzionamento é garantito anche in mancanza di corrente. FERMO A GIORNO: Con il pulsante meccanico cod. 059 é consentito il bloccaggio dell’elettroserratura in posizione di “aperto”. MANO: Reversibile. PARTI IN DOTAZIONE: Vite cilindro, istruzioni di montaggio. CONSTRUCTIVE FEATURES: Zinc and plastic plated steel case and cover - Nickel and chromium plated steel forend - Nickel-plated brass dead and latch bolt - Nickel-plated steel piston - Brass square spindle device mm.8 - Coil set cod. 033 (12V-15W a.c.) CE. WORKING: Key driven dead bolt - Key, handle, remote control or push-button cod. 058 driven latch bolt - Working is assured also without current. HOLD OPEN DEVICE: With push-button cod. 059, it is possible to block the electric lock in its “open” position. HAND: Reversible. PROVIDED WITH: Cylinder screw, assembling instructions. COD. E F A B MSC mandate throws 778 70 1615367 1910,5 2 0,631 10 778/F22 70 2215367 1910,5 2 0,651 10 878 80 1616367 1910,5 2 0,701 10 878/F22 80 2216367 1910,5 2 0,721 10 Scrocco con mandata - Con dispositivo per esclusione mandata Latch bolt with throw - With throw exclusion system CARATTERISTICHE COSTRUTTIVE: Scatola e coperchio in acciaio zincato e plastificato Frontale in acciaio nichelato e cromato - Scrocco in ottone nichelato - Pistone di ricarica mm.8 - Gruppo bobine cod. 034 in acciaio nichelato - Ingegno maniglia in ottone foro (12V-15W a.c.) CE. FUNZIONAMENTO: Mandata comandata dalla chiave - Scrocco comandato dalla chiave, dalla maniglia, dal comando elettrico a distanza o dal pulsante meccanico cod. 058 - Il funzionamento é garantito anche in mancanza di corrente. FERMO A GIORNO: Con il pulsante meccanico cod. 059 é consentito il bloccaggio dell’elettroserratura in posizione di “aperto”. MANO: Reversibile. PARTI IN DOTAZIONE: Vite cilindro, istruzioni di montaggio. CONSTRUCTIVE FEATURES: Zinc and plastic plated steel case and cover - Nickel and chromium plated steel forend - Nickel-plated brass latch bolt - Nickel-plated steel piston - Brass square spindle device mm.8 - Coil set cod. 034 (12V-15W a.c.) CE. WORKING: Key driven throw - Key, handle, remote control or push-button cod. 058 driven latch bolt - Working is assured also without current. HOLD OPEN DEVICE: With push-button cod. 059, it is possible to block the electric lock in its “open” position. HAND: Reversible. PROVIDED WITH: Cylinder screw, assembling instructions. COD. E F A BMS mandate throws 388 60 161334719,5 - 1 0,491 10 388/F22 60 221334719,5 - 1 0,511 10 788 70 161536719,5 - 1 0,541 10 788/F22 70 221536719,5 - 1 0,561 10 788-TT/F15 7014,6153 6724,5 6 1 0,55 1 10 888 80 161636719,5 - 1 0,551 10 888/F22 80 221636719,5 - 1 0,571 10 888-TT/F15 8014,6163 6724,5 6 1 0,56 1 10 103 Elettroserrature per fasce Horizontal electric locks Scrocco (non reversibile) - Latch bolt (not reversible) CARATTERISTICHE COSTRUTTIVE: Scatola e coperchio in acciaio zincato e plastificato Frontale in acciaio nichelato e cromato - Scrocco in ottone nichelato - Pistone di ricarica in acciaio nichelato - Gruppo bobine cod. 034 (12V-15W a.c.) CE. FUNZIONAMENTO: Scrocco comandato dalla chiave, dal comando elettrico a distanza o dal pulsante meccanico cod. 058 - Il funzionamento é garantito anche in mancanza di corrente. FERMO A GIORNO: Con il pulsante meccanico cod. 059 é consentito il bloccaggio dell’elettroserratura in posizione di “aperto”. MANO: DX = destra - SX = sinistra. PARTI IN DOTAZIONE: Vite cilindro. CONSTRUCTIVE FEATURES: Zinc and plastic plated steel case and cover - Nickel and chromium plated steel forend - Nickel-plated brass latch bolt - Nickel-plated steel piston - Coil set cod. 034 (12V-15W a.c.) CE. WORKING: Key, remote control or push-button cod. 058 driven latch bolt - Working is assured also without current. HOLD OPEN DEVICE: With push-button cod. 059, it is possible to block the electric lock in its “open” position. HAND: DX = right - SX = left. PROVIDED WITH: Cylinder screw. COD. EFASC 399 DX 601613310,50,33110 399 SX 601613310,50,33110 399/F22 DX 602213310,50,35110 399/F22 SX 602213310,50,35110 Scrocco - Latch bolt CARATTERISTICHE COSTRUTTIVE: Scatola e coperchio in acciaio zincato e plastificato Frontale in acciaio nichelato e cromato - Scrocco in ottone nichelato - Pistone di ricarica mm.8 - Gruppo bobine cod. 034 in acciaio nichelato - Ingegno maniglia in ottone foro (12V-15W a.c.) CE. FUNZIONAMENTO: Scrocco comandato dalla chiave, dalla maniglia, dal comando elettrico a distanza o dal pulsante meccanico cod. 058 - Il funzionamento é garantito anche in mancanza di corrente. FERMO A GIORNO: Con il pulsante meccanico cod. 059 é consentito il bloccaggio dell’elettroserratura in posizione di “aperto”. MANO: Reversibile. PARTI IN DOTAZIONE: Vite cilindro, istruzioni di montaggio. CONSTRUCTIVE FEATURES: Zinc and plastic plated steel case and cover - Nickel and chromium plated steel forend - Nickel-plated brass latch bolt - Nickel-plated steel piston - Brass square spindle device mm.8 - Coil set cod. 034 (12V-15W a.c.) CE. WORKING: Key, handle, remote control or push-button cod. 058 driven latch bolt Working is assured also without current. HOLD OPEN DEVICE: With push-button cod. 059, it is possible to block the electric lock in its “open” position. HAND: Reversible. PROVIDED WITH: Cylinder screw, assembling instructions. COD. 104 EFABSC 799 70 1615367 10,5 0,381 10 799/F22 70 2215367 10,5 0,401 10 899 80 1616367 10,5 0,391 10 899/F22 80 2216367 10,5 0,411 10 999 90 1617367 10,5 0,411 - 999/F22 90 2217367 10,5 0,431 - Elettroserrature per fasce Horizontal electric locks Scrocco con mandata Latch bolt with throw CARATTERISTICHE COSTRUTTIVE: Scatola e coperchio in acciaio zincato e plastificato Frontale in acciaio nichelato e cromato - Scrocco in ottone nichelato - Pistone di ricarica mm.8 - Gruppo bobine cod. 033 in acciaio nichelato - Ingegno maniglia in ottone foro (12V-15W a.c.) CE. FUNZIONAMENTO: Mandata comandata dalla chiave - Scrocco comandato dalla chiave, dalla maniglia, dal comando elettrico a distanza o dal pulsante meccanico cod. 058 - Il funzionamento é garantito anche in mancanza di corrente. FERMO A GIORNO: Con il pulsante meccanico cod. 059 é consentito il bloccaggio dell’elettroserratura in posizione di “aperto”. MANO: Reversibile. PARTI IN DOTAZIONE: Vite cilindro, istruzioni di montaggio. CONSTRUCTIVE FEATURES: Zinc and plastic plated steel case and cover - Nickel and chromium plated steel forend - Nickel-plated brass latch bolt - Nickel-plated steel piston - Brass square spindle device mm.8 - Coil set cod. 033 (12V-15W a.c.) CE. WORKING: Key driven throw - Key, handle, remote control or push-button cod. 058 driven latch bolt - Working is assured also without current. HOLD OPEN DEVICE: With push-button cod. 059, it is possible to block the electric lock in its “open” position. HAND: Reversible. PROVIDED WITH: Cylinder screw, assembling instructions. COD. E F A BM mandate throws 1777 70 161536720,5 1 0,601 10 1777/F22 70 221536720,5 1 0,621 10 105 Serrature di sicurezza per fasce Horizontal security locks Scrocco e rullo intercambiabili - Interchangeable latch bolt/roller bolt COD. Per serrature serie cod. Cod. For locks series cod. 05931 11140 - 11170 - 1940 - 1970 - 41140 - 41170 - 4940 - tappo - plug 05935 Scrocco regolabile ~ 5 mm rullo - roller bolt Adjustable latch bolt ~ 5 mm Rullo cod. 05935 Roller bolt cod. 05935 Tappo cod. 05931 Plug cod. 05931 Montaggio cilindro a spillo - Cross key cylinder assembly Cilindro a spillo cod. Per serrature serie cod. Cross key cylinder cod. For locks series cod. 4062 11140 - 11141 - 11145 - 11148 4062/1 11170 - 11171 - 11175 - 11178 con chiavi lunghe 1940 - 1941 - 1945 - 1948 long keys 1970 - 1971 - 1975 - 1978 Catenaccio rinforzato Hardened dead bolt 106 4970 - 5930 - 5940 - 5960 - 5970 Serrature di sicurezza per fasce Horizontal security locks Catenaccio e scrocco regolabile - Dead and adjustable latch bolt Scrocco intercambiabile con rullo cod. 05935 - CARATTERISTICHE COSTRUTTIVE: Scatola e coperchio in acciaio zincato e plastificato - Frontale in acciaio inox - Catenaccio in acciaio nichelato - Scrocco in lega speciale nichelata - Ingegno maniglia in acciaio brunito foro mm.8. FUNZIONAMENTO: Catenaccio comandato dalla chiave - Scrocco comandato dalla chiave o dalla maniglia. MANO: Reversibile. PARTI IN DOTAZIONE: 2 borchie cod.0120 N, 2 sottofrontali cod. 0624 N (frontale mm.25) oppure 2 cod. 0625 N (frontale mm.22), vite cilindro, viti di fissaggio in acciaio inox, istruzioni di montaggio. Latch bolt interchangeable into roller bolt cod. 05935 COD. 1940 E F A BM mandate throws 90 2518667 33 3 0,961 5 1940/F22 90 2218667 33 3 0,941 5 11140 1102520667 33 3 1,031 5 11140/F22 1102220667 33 3 1,011 5 CONSTRUCTIVE FEATURES: Zinc and plastic plated steel case and cover - Stainless steel forend - Nickel-plated steel dead bolt - Special nickel-plated alloy latch bolt - Burnished steel square spindle device mm.8. WORKING: Key driven dead bolt - Handle or key driven latch bolt. HAND: Reversible. PROVIDED WITH: 2 roses cod. 0120 N, 2 forend spacers cod. 0624 N (forend 25 mm.) or 2 cod. 0625 N (forend 22 mm.), cylinder screw, stainless steel fixing screws, assembling instructions. Catenaccio - Dead bolt CARATTERISTICHE COSTRUTTIVE: Scatola e coperchio in acciaio mandate zincato e plastificato - Frontale in acciaio inox - Catenaccio in COD. E F A BM throws acciaio nichelato. FUNZIONAMENTO: Catenaccio comandato dalla chiave. 1941 90 2518667 33 3 0,761 5 MANO: Unica. PARTI IN DOTAZIONE: 2 borchie cod.0120 N, 2 sottofrontali cod. 1941/F22 90 2218667 33 3 0,741 5 0624 N (frontale mm.25) oppure 2 cod. 0625 N (frontale mm.22), 1102520667 33 3 0,831 5 vite cilindro, viti di fissaggio in acciaio inox, istruzioni di montaggio. 11141 CONSTRUCTIVE FEATURES: Zinc and plastic plated steel case 11141/F22 1102220667 33 3 0,811 5 and cover - Stainless steel forend - Nickel-plated steel dead bolt. WORKING: Key driven dead bolt. HAND: No hand. PROVIDED WITH: 2 roses cod. 0120 N, 2 forend spacers cod. 0624 N (forend 25 mm.) or 2 cod. 0625 N (forend 22 mm.), cylinder screw, stainless steel fixing screws, assembling instructions. 107 Serrature di sicurezza per fasce Horizontal security locks Catenaccio e rullo regolabile - Dead and adjustable roller bolt CARATTERISTICHE COSTRUTTIVE: Scatola e coperchio in acciaio mandate zincato e plastificato - Frontale in acciaio inox - Catenaccio in COD. E F A BM throws acciaio nichelato - Rullo in ottone nichelato. FUNZIONAMENTO: Catenaccio comandato dalla chiave - Rullo 1945 90 2518667 33 3 0,961 5 comandato a pressione o dalla chiave. MANO: Unica. 1945/F22 90 2218667 33 3 0,941 5 PARTI IN DOTAZIONE: 2 borchie cod.0120 N, 2 sottofrontali cod. 0624 N (frontale mm.25) oppure 2 cod. 0625 N (frontale mm.22), 11145 1102520667 33 3 1,031 5 vite cilindro, viti di fissaggio in acciaio inox, istruzioni di montaggio. 11145/F22 1102220667 33 3 1,011 5 CONSTRUCTIVE FEATURES: Zinc and plastic plated steel case and cover - Stainless steel forend - Nickel-plated steel dead bolt Nickel-plated brass roller bolt. WORKING: Key driven dead bolt - Pressure or key driven roller bolt. HAND: No hand. PROVIDED WITH: 2 roses cod. 0120 N, 2 forend spacers cod. 0624 N (forend 25 mm.) or 2 cod. 0625 N (forend 22 mm.), cylinder screw, stainless steel fixing screws, assembling instructions. Catenaccio e scrocco regolabile 3 punti di chiusura Scrocco intercambiabile con rullo cod. 05935 - CARATTERISTICHE COSTRUTTIVE: Scatola e coperchio in acciaio zincato e plastificato - Frontale in acciaio inox - Catenaccio in acciaio nichelato - Scrocco in lega speciale nichelata - Ingegno maniglia in acciaio brunito foro mm.8. FUNZIONAMENTO: Catenaccio comandato dalla chiave - Scrocco comandato dalla chiave o dalla maniglia. MANO: Reversibile. PARTI IN DOTAZIONE: 2 borchie cod.0120 N, 2 sottofrontali cod. 0624 N (frontale mm.25) oppure 2 cod. 0625 N (frontale mm.22), vite cilindro, viti di fissaggio in acciaio inox, istruzioni di montaggio. CONSTRUCTIVE FEATURES: Zinc and plastic plated steel case and cover - Stainless steel forend - Nickel-plated steel dead bolt - Special nickel-plated alloy latch bolt - Burnished steel square spindle device mm.8. WORKING: Key driven dead bolt - Handle or key driven latch bolt. HAND: Reversible. PROVIDED WITH: 2 roses cod. 0120 N, 2 forend spacers cod. 0624 N (forend 25 mm.) or 2 cod. 0625 N (forend 22 mm.), cylinder screw, stainless steel fixing screws, assembling instructions. 108 Dead and adjustable latch bolt 3 locking points Latch bolt interchangeable into roller bolt cod. 05935 COD. 1970 E F A BM mandate throws 90 2518667 33 3 1,041 5 1970/F22 90 2218667 33 3 1,021 5 11170 1102520667 33 3 1,111 5 11170/F22 1102220667 33 3 1,091 5 Serrature di sicurezza per fasce Horizontal security locks Catenaccio 3 punti di chiusura - Dead bolt 3 locking points CARATTERISTICHE COSTRUTTIVE: Scatola e coperchio in acciaio mandate zincato e plastificato - Frontale in acciaio inox - Catenaccio in COD. E F A BM throws acciaio nichelato. FUNZIONAMENTO: Catenaccio comandato dalla chiave. 1971 90 2518667 33 3 0,841 5 MANO: Unica. PARTI IN DOTAZIONE: 2 borchie cod.0120 N, 2 sottofrontali cod. 1971/F22 90 2218667 33 3 0,821 5 0624 N (frontale mm.25) oppure 2 cod. 0625 N (frontale mm.22), 1102520667 33 3 0,911 5 vite cilindro, viti di fissaggio in acciaio inox, istruzioni di montaggio. 11171 CONSTRUCTIVE FEATURES: Zinc and plastic plated steel case 11171/F22 1102220667 33 3 0,891 5 and cover - Stainless steel forend - Nickel-plated steel dead bolt. WORKING: Key driven dead bolt. HAND: No hand. PROVIDED WITH: 2 roses cod. 0120 N, 2 forend spacers cod. 0624 N (forend 25 mm.) or 2 cod. 0625 N (forend 22 mm.), cylinder screw, stainless steel fixing screws, assembling instructions. Catenaccio e rullo regolabile 3 punti di chiusura - CARATTERISTICHE COSTRUTTIVE: Scatola e coperchio in acciaio zincato e plastificato - Frontale in acciaio inox - Catenaccio in COD. acciaio nichelato - Rullo in ottone nichelato. FUNZIONAMENTO: Catenaccio comandato dalla chiave - Rullo 1975 comandato a pressione o dalla chiave. MANO: Unica. 1975/F22 PARTI IN DOTAZIONE: 2 borchie cod.0120 N, 2 sottofrontali cod. 0624 N (frontale mm.25) oppure 2 cod. 0625 N (frontale mm.22), 11175 vite cilindro, viti di fissaggio in acciaio inox, istruzioni di montaggio. Dead and adjustable roller bolt 3 locking points E F A BM mandate throws 90 2518667 33 3 1,041 5 90 2218667 33 3 1,021 5 1102520667 33 3 1,111 5 11175/F22 1102220667 33 3 1,091 5 CONSTRUCTIVE FEATURES: Zinc and plastic plated steel case and cover - Stainless steel forend - Nickel-plated steel dead bolt Nickel-plated brass roller bolt. WORKING: Key driven dead bolt - Pressure or key driven roller bolt. HAND: No hand. PROVIDED WITH: 2 roses cod. 0120 N, 2 forend spacers cod. 0624 N (forend 25 mm.) or 2 cod. 0625 N (forend 22 mm.), cylinder screw, stainless steel fixing screws, assembling instructions. 109 Serrature di sicurezza per fasce Horizontal security locks Catenaccio e scrocco regolabile - Dead and adjustable latch bolt Scrocco intercambiabile con rullo cod. 05935 - CARATTERISTICHE COSTRUTTIVE: Scatola e coperchio in acciaio zincato e plastificato - Frontale in acciaio inox - Catenaccio in acciaio nichelato - Scrocco in lega speciale nichelata - Ingegno mm.8 - Cilindro a spillo cod. maniglia in acciaio brunito foro 4062 o 4062/1 (con chiavi lunghe). FUNZIONAMENTO: Catenaccio comandato dalla chiave - Scrocco comandato dalla chiave o dalla maniglia. MANO: Reversibile. PARTI IN DOTAZIONE: 3 chiavi, 2 borchie cod.0441 N, 2 sottofrontali cod. 0624 N (frontale mm.25) oppure 2 cod. 0625 N (frontale mm.22), viti di fissaggio in acciaio inox, istruzioni di montaggio. Latch bolt interchangeable into roller bolt cod. 05935 COD. 4940 EF AM 4100 3 1,041 5 4940/F22 90 2218633 4100 3 1,021 5 41140 1102520633 4100 3 1,111 5 41140/F22 1102220633 4100 3 1,091 5 4101 - +0,02 Dead bolt CARATTERISTICHE COSTRUTTIVE: Scatola e coperchio in acciaio zincato e plastificato - Frontale in acciaio inox - Catenaccio in acciaio nichelato - Cilindro a spillo cod. 4062 o 4062/1 (con chiavi lunghe). FUNZIONAMENTO: Catenaccio comandato dalla chiave. MANO: Unica. PARTI IN DOTAZIONE: 3 chiavi, 2 borchie cod.0441 N, 2 sottofrontali cod. 0624 N (frontale mm.25) oppure 2 cod. 0625 N (frontale mm.22), viti di fissaggio in acciaio inox, istruzioni di montaggio. COD. 4941 EF AM mandate throws 90 2518633 4100 3 0,841 5 4941/F22 90 2218633 4100 3 0,821 5 41141 1102520633 4100 3 0,911 5 41141/F22 1102220633 4100 3 0,891 5 4101 - +0,02 CONSTRUCTIVE FEATURES: Zinc and plastic plated steel case and cover - Stainless steel forend - Nickel-plated steel dead bolt Cross cylinder cod. 4062 or 4062/1 (with long keys). WORKING: Key driven dead bolt. HAND: No hand. PROVIDED WITH: 3 keys, 2 escutcheons cod. 0441 N, 2 forend spacers cod. 0624 N (forend 25 mm.) or 2 cod. 0625 N (forend 22 mm.), Chiavi lunghe - Long keys ----/1 stainless steel fixing screws, assembling instructions. 110 throws 90 2518633 CONSTRUCTIVE FEATURES: Zinc and plastic plated steel case and cover - Stainless steel forend - Nickel-plated steel dead bolt - Special nickel-plated alloy latch bolt - Burnished steel square mm.8 - Cross cylinder cod. 4062 or 4062/1 (with spindle device long keys). WORKING: Key driven dead bolt - Handle or key driven latch bolt. HAND: Reversible. PROVIDED WITH: 3 keys, 2 escutcheons cod. 0441 N, 2 forend Chiavi lunghe - Long keys ----/1 spacers cod. 0624 N (forend 25 mm.) or 2 cod. 0625 N (forend 22 mm.), stainless steel fixing screws, assembling instructions. Catenaccio - mandate Serrature di sicurezza per fasce Horizontal security locks Catenaccio e rullo regolabile - Dead and adjustable roller bolt CARATTERISTICHE COSTRUTTIVE: Scatola e coperchio in acciaio zincato e plastificato - Frontale in acciaio inox - Catenaccio in COD. EF AM acciaio nichelato - Rullo in ottone nichelato - Cilindro a spillo cod. 4062 o 4062/1 (con chiavi lunghe). 90 2518633 4100 FUNZIONAMENTO: Catenaccio comandato dalla chiave - Rullo 4945 comandato a pressione o dalla chiave. 4945/F22 90 2218633 4100 MANO: Unica. PARTI IN DOTAZIONE: 3 chiavi, 2 borchie cod.0441 N, 2 sottofrontali 41145 1102520633 4100 cod. 0624 N (frontale mm.25) oppure 2 cod. 0625 N (frontale mm.22), viti di fissaggio in acciaio inox, istruzioni di montaggio. 41145/F22 1102220633 4100 CONSTRUCTIVE FEATURES: Zinc and plastic plated steel case and cover - Stainless steel forend - Nickel-plated steel dead bolt - Nickel-plated brass roller bolt - Cross cylinder cod. 4062 or 4062/1 (with long keys). WORKING: Key driven dead bolt - Pressure or key driven roller bolt. HAND: No hand. PROVIDED WITH: 3 keys, 2 escutcheons cod. 0441 N, 2 forend spacers cod. 0624 N (forend 25 mm.) or 2 cod. 0625 N (forend 22 mm.), ----/1 Chiavi lunghe - Long keys stainless steel fixing screws, assembling instructions. Catenaccio e scrocco regolabile 3 punti di chiusura Scrocco intercambiabile con rullo cod. 05935 - CARATTERISTICHE COSTRUTTIVE: Scatola e coperchio in acciaio zincato e plastificato - Frontale in acciaio inox - Catenaccio in acciaio nichelato - Scrocco in lega speciale nichelata - Ingegno mm.8 - Cilindro a spillo cod. maniglia in acciaio brunito foro 4062 o 4062/1 (con chiavi lunghe). FUNZIONAMENTO: Catenaccio comandato dalla chiave - Scrocco comandato dalla chiave o dalla maniglia. MANO: Reversibile. PARTI IN DOTAZIONE: 3 chiavi, 2 borchie cod.0441 N, 2 sottofrontali cod. 0624 N (frontale mm.25) oppure 2 cod. 0625 N (frontale mm.22), viti di fissaggio in acciaio inox, istruzioni di montaggio. mandate throws 3 1,041 5 3 1,021 5 3 1,111 5 3 1,091 5 4101 - +0,02 Dead and adjustable latch bolt 3 locking points Latch bolt interchangeable into roller bolt cod. 05935 COD. 4970 EF AM mandate throws 90 2518633 4100 3 1,121 5 4970/F22 90 2218633 4100 3 1,101 5 41170 1102520633 4100 3 1,191 5 41170/F22 1102220633 4100 3 1,171 5 4101 - +0,02 CONSTRUCTIVE FEATURES: Zinc and plastic plated steel case and cover - Stainless steel forend - Nickel-plated steel dead bolt - Special nickel-plated alloy latch bolt - Burnished steel square mm.8 - Cross cylinder cod. 4062 or 4062/1 (with spindle device long keys). WORKING: Key driven dead bolt - Handle or key driven latch bolt. HAND: Reversible. PROVIDED WITH: 3 keys, 2 escutcheons cod. 0441 N, 2 forend Chiavi lunghe - Long keys spacers cod. 0624 N (forend 25 mm.) or 2 cod. 0625 N (forend 22 mm.), ----/1 stainless steel fixing screws, assembling instructions. 111 Serrature di sicurezza per fasce Horizontal security locks Catenaccio 3 punti di chiusura - Dead bolt 3 locking points CARATTERISTICHE COSTRUTTIVE: Scatola e coperchio in acciaio zincato e plastificato - Frontale in acciaio inox - Catenaccio in acciaio nichelato - Cilindro a spillo cod. 4062 o 4062/1 (con chiavi lunghe). FUNZIONAMENTO: Catenaccio comandato dalla chiave. MANO: Unica. PARTI IN DOTAZIONE: 3 chiavi, 2 borchie cod.0441 N, 2 sottofrontali cod. 0624 N (frontale mm.25) oppure 2 cod. 0625 N (frontale mm.22), viti di fissaggio in acciaio inox, istruzioni di montaggio. COD. 4971 EF AM 4100 3 0,921 5 4971/F22 90 2218633 4100 3 0,901 5 41171 1102520633 4100 3 0,991 5 41171/F22 1102220633 4100 3 0,971 5 4101 - +0,02 Catenaccio e rullo regolabile 3 punti di chiusura - COD. Dead and adjustable roller bolt 3 locking points EF AM mandate throws 4975 90 2518633 4100 3 1,121 5 4975/F22 90 2218633 4100 3 1,101 5 41175 1102520633 4100 3 1,191 5 41175/F22 1102220633 4100 3 1,171 5 4101 - +0,02 CONSTRUCTIVE FEATURES: Zinc and plastic plated steel case and cover - Stainless steel forend - Nickel-plated steel dead bolt - Nickel-plated brass roller bolt - Cross cylinder cod. 4062 or 4062/1 (with long keys). WORKING: Key driven dead bolt - Pressure or key driven roller bolt. HAND: No hand. PROVIDED WITH: 3 keys, 2 escutcheons cod. 0441 N, 2 forend spacers cod. 0624 N (forend 25 mm.) or 2 cod. 0625 N (forend 22 ----/1 Chiavi lunghe - Long keys mm.), stainless steel fixing screws, assembling instructions. 112 throws 90 2518633 CONSTRUCTIVE FEATURES: Zinc and plastic plated steel case and cover - Stainless steel forend - Nickel-plated steel dead bolt - Cross cylinder cod. 4062 or 4062/1 (with long keys). WORKING: Key driven dead bolt. HAND: No hand. PROVIDED WITH: 3 keys, 2 escutcheons cod. 0441 N, 2 forend spacers cod. 0624 N (forend 25 mm.) or 2 cod. 0625 N (forend Chiavi lunghe - Long keys ----/1 22 mm.), stainless steel fixing screws, assembling instructions. CARATTERISTICHE COSTRUTTIVE: Scatola e coperchio in acciaio zincato e plastificato - Frontale in acciaio inox - Catenaccio in acciaio nichelato - Rullo in ottone nichelato - Cilindro a spillo cod. 4062 o 4062/1 (con chiavi lunghe). FUNZIONAMENTO: Catenaccio comandato dalla chiave - Rullo comandato a pressione o dalla chiave. MANO: Unica. PARTI IN DOTAZIONE: 3 chiavi, 2 borchie cod.0441 N, 2 sottofrontali cod. 0624 N (frontale mm.25) oppure 2 cod. 0625 N (frontale mm.22), viti di fissaggio in acciaio inox, istruzioni di montaggio. mandate Elettroserrature di sicurezza per fasce Horizontal security electric locks Catenaccio e scrocco - Dead and latch bolt NEW CARATTERISTICHE COSTRUTTIVE: Scatola e coperchio in acciaio zincato e plastificato Frontale in acciaio inox - Catenaccio e pistone di ricarica in acciaio nichelato - Scrocco mm.8 - Bobina cod. in lega speciale nichelata - Ingegno maniglia in acciaio brunito foro 048 (12V-10W a.c.) CE. FUNZIONAMENTO: Catenaccio comandato dalla chiave - Scrocco comandato dalla chiave, dalla maniglia, dal comando elettrico a distanza o dal pulsante meccanico cod.058 - Il funzionamento è garantito anche in mancanza di corrente. FERMO A GIORNO: Con il pulsante meccanico cod.059 è consentito il bloccaggio dell’elettroserratura in posizione di “aperto”. MANO: Reversibile. PARTI IN DOTAZIONE: 2 borchie cod. 0120 N, 2 sottofrontali cod. 0624 N (frontale mm.25) oppure 2 cod. 0625 N (frontale mm.22), vite cilindro, viti di fissaggio in acciaio inox, istruzioni di montaggio. CONSTRUCTIVE FEATURES: Zinc and plastic plated steel case and cover - Stainless steel forend - Nickel-plated steel dead bolt and piston - Special nickel-plated alloy latch mm.8 - Coil set cod. 048 (12V-10W a.c.) CE. bolt - Burnished steel square spindle device WORKING: Key driven dead bolt - Key, handle, remote control or push-button cod. 058 driven latch bolt - Working is assured also without current. HOLD OPEN DEVICE: With push-button cod. 059, it is possible to block the electric lock in its “open”position. HAND: Reversible. PROVIDED WITH: 2 roses cod. 0120 N, 2 forend spacers cod. 0624 N (forend 25 mm.) or 2 cod. 0625 N (forend 22 mm.), cylinder screw, stainless steel fixing screws, assembling instructions. COD. 1948 E F A BM mandate throws 90 2518667 33 3 0,971 5 1948/F22 90 2218667 33 3 0,951 5 11148 1102520667 33 3 1,041 5 11148/F22 1102220667 33 3 1,021 5 Catenaccio e scrocco 3 punti di chiusura - Dead and latch bolt 3 locking points NEW CARATTERISTICHE COSTRUTTIVE: Scatola e coperchio in acciaio zincato e plastificato Frontale in acciaio inox - Catenaccio e pistone di ricarica in acciaio nichelato - Scrocco mm.8 - Bobina cod. in lega speciale nichelata - Ingegno maniglia in acciaio brunito foro 048 (12V-10W a.c.) CE. FUNZIONAMENTO: Catenaccio comandato dalla chiave - Scrocco comandato dalla chiave, dalla maniglia, dal comando elettrico a distanza o dal pulsante meccanico cod.058 - Il funzionamento è garantito anche in mancanza di corrente. FERMO A GIORNO: Con il pulsante meccanico cod.059 è consentito il bloccaggio dell’elettroserratura in posizione di “aperto”. MANO: Reversibile. PARTI IN DOTAZIONE: 2 borchie cod. 0120 N, 2 sottofrontali cod. 0624 N (frontale mm.25) oppure 2 cod. 0625 N (frontale mm.22), vite cilindro, viti di fissaggio in acciaio inox, istruzioni di montaggio. CONSTRUCTIVE FEATURES: Zinc and plastic plated steel case and cover - Stainless steel forend - Nickel-plated steel dead bolt and piston - Special nickel-plated alloy latch bolt - Burnished steel square spindle device mm.8 - Coil set cod. 048 (12V-10W a.c.) CE. WORKING: Key driven dead bolt - Key, handle, remote control or push-button cod. 058 driven latch bolt - Working is assured also without current. HOLD OPEN DEVICE: With push-button cod. 059, it is possible to block the electric lock in its “open”position. HAND: Reversible. PROVIDED WITH: 2 roses cod. 0120 N, 2 forend spacers cod. 0624 N (forend 25 mm.) or 2 cod. 0625 N (forend 22 mm.), cylinder screw, stainless steel fixing screws, assembling instructions. COD. 1978 E F A BM mandate throws 90 2518667 33 3 1,051 5 1978/F22 90 2218667 33 3 1,031 5 11178 1102520667 33 3 1,121 5 11178/F22 1102220667 33 3 1,101 5 113 Elettroserrature di sicurezza per fasce Horizontal security electric locks Catenaccio e scrocco - Dead and latch bolt NEW CARATTERISTICHE COSTRUTTIVE: Scatola e coperchio in acciaio zincato e plastificato - Frontale in acciaio inox - Catenaccio e pistone di ricarica in acciaio nichelato mm.8 - Scrocco in lega speciale nichelata - Ingegno maniglia in acciaio brunito foro Bobina cod. 048 (12V-10W a.c.) CE - Cilindro a spillo cod. 4062 o 4062/1 (con chiavi lunghe). FUNZIONAMENTO: Catenaccio comandato dalla chiave - Scrocco comandato dalla chiave, dalla maniglia, dal comando elettrico a distanza o dal pulsante meccanico cod.058 - Il funzionamento è garantito anche in mancanza di corrente. FERMO A GIORNO: Con il pulsante meccanico cod.059 è consentito il bloccaggio dell’elettroserratura in posizione di “aperto”. MANO: Reversibile. PARTI IN DOTAZIONE: 3 chiavi, 2 borchie cod. 0441 N, 2 sottofrontali cod. 0624 N (frontale mm.25) oppure 2 cod. 0625 N (frontale mm.22), viti di fissaggio in acciaio inox, istruzioni di montaggio. CONSTRUCTIVE FEATURES: Zinc and plastic plated steel case and cover - Stainless steel forend - Nickel-plated steel dead bolt and piston - Special nickel-plated alloy latch bolt Burnished steel square spindle device mm.8 - Coil set cod. 048 (12V-10W a.c.) CE - Cross cylinder cod. 4062 or 4062/1 (with long keys). WORKING: Key driven dead bolt - Key, handle, remote control or push-button cod. 058 driven latch bolt - Working is assured also without current. HOLD OPEN DEVICE: With push-button cod. 059, it is possible to block the electric lock in its “open”position. HAND: Reversible. PROVIDED WITH: 3 keys, 2 escutcheons cod. 0441 N, 2 forend spacers cod. 0624 N (forend 25 mm.) or 2 cod. 0625 N (forend 22 mm.), stainless steel fixing screws, assembling instructions. COD. 4948 EF AM mandate throws 90 2518633 4100 3 1,051 5 4948/F22 90 2218633 4100 3 1,031 5 41148 1102520633 4100 3 1,121 5 41148/F22 1102220633 4100 3 1,101 5 Chiavi lunghe - Long keys ----/1 4101 - +0,02 Catenaccio e scrocco 3 punti di chiusura - Dead and latch bolt 3 locking points NEW CARATTERISTICHE COSTRUTTIVE: Scatola e coperchio in acciaio zincato e plastificato - Frontale in acciaio inox - Catenaccio e pistone di ricarica in acciaio nichelato Scrocco in lega speciale nichelata - Ingegno maniglia in acciaio brunito foro mm.8 - Bobina cod. 048 (12V-10W a.c.) CE - Cilindro a spillo cod. 4062 o 4062/1 (con chiavi lunghe). FUNZIONAMENTO: Catenaccio comandato dalla chiave - Scrocco comandato dalla chiave, dalla maniglia, dal comando elettrico a distanza o dal pulsante meccanico cod.058 - Il funzionamento è garantito anche in mancanza di corrente. FERMO A GIORNO: Con il pulsante meccanico cod.059 è consentito il bloccaggio dell’elettroserratura in posizione di “aperto”. MANO: Reversibile. PARTI IN DOTAZIONE: 3 chiavi, 2 borchie cod. 0441 N, 2 sottofrontali cod. 0624 N (frontale mm.25) oppure 2 cod. 0625 N (frontale mm.22), viti di fissaggio in acciaio inox, istruzioni di montaggio. CONSTRUCTIVE FEATURES: Zinc and plastic plated steel case and cover - Stainless steel forend - Nickel-plated steel dead bolt and piston - Special nickel-plated alloy latch bolt Burnished steel square spindle device mm.8 - Coil set cod. 048 (12V-10W a.c.) CE - Cross cylinder cod. 4062 or 4062/1 (with long keys). WORKING: Key driven dead bolt - Key, handle, remote control or push-button cod. 058 driven latch bolt - Working is assured also without current. HOLD OPEN DEVICE: With push-button cod. 059, it is possible to block the electric lock in its “open”position. HAND: Reversible. PROVIDED WITH: 3 keys, 2 escutcheons cod. 0441 N, 2 forend spacers cod. 0624 N (forend 25 mm.) or 2 cod. 0625 N (forend 22 mm.), stainless steel fixing screws, assembling instructions. COD. 4978 mandate throws 90 2518633 4100 3 1,131 5 4978/F22 90 2218633 4100 3 1,121 5 1102520633 4100 3 1,201 5 41178/F22 1102220633 4100 3 1,191 5 Chiavi lunghe - Long keys ----/1 4101 - +0,02 41178 114 EF AM Serrature a doppia mappa per fasce Horizontal double-bit key locks Catenaccio e scrocco regolabile - Dead and adjustable latch bolt Scrocco intercambiabile con rullo cod. 05935 - Latch bolt interchangeable into roller bolt cod. 05935 CARATTERISTICHE COSTRUTTIVE: Scatola e coperchio in acciaio zincato e plastificato - Frontale in acciaio inox - Catenaccio in COD. EF AM acciaio nichelato - Scrocco in lega speciale nichelata - Ingegno maniglia in acciaio brunito foro mm.8. FUNZIONAMENTO: Catenaccio comandato dalla chiave - Scrocco 5930 90 2518637 5100/06 comandato dalla chiave o dalla maniglia. 5930/F22 90 2218637 5100/06 MANO: Reversibile. PARTI IN DOTAZIONE: 3 chiavi, coppia borchie cod. 0590 N, 2 sottofrontali cod. 0624 N (frontale mm.25) oppure 2 cod. 0625 N (frontale mm.22), viti di fissaggio in acciaio inox, istruzioni di montaggio. mandate throws 4 1,321 5 4 1,301 5 CONSTRUCTIVE FEATURES: Zinc and plastic plated steel case and cover - Stainless steel forend - Nickel-plated steel dead bolt - Special nickel-plated alloy latch bolt - Burnished steel square spindle device mm.8. WORKING: Key driven dead bolt - Handle or key driven latch bolt. HAND: Reversible. PROVIDED WITH: 3 keys, escutcheons cod. 0590 N, 2 forend spacers cod. 0624 N (forend 25 mm.) or 2 cod. 0625 N (forend 22 mm.), ----/1 Chiavi lunghe - Long keys 5101/06 - +0,01 stainless steel fixing screws, assembling instructions. Catenaccio - Dead bolt CARATTERISTICHE COSTRUTTIVE: Scatola e coperchio in acciaio zincato e plastificato - Frontale in acciaio inox - Catenaccio in COD. EF AM acciaio nichelato. FUNZIONAMENTO: Catenaccio comandato dalla chiave. 5931 90 2518637 5100/06 MANO: Unica. PARTI IN DOTAZIONE: 3 chiavi, coppia borchie cod. 0590 N, 5931/F22 90 2218637 5100/06 2 sottofrontali cod. 0624 N (frontale mm.25) oppure 2 cod. 0625 N (frontale mm.22), viti di fissaggio in acciaio inox, istruzioni di montaggio. mandate throws 4 1,101 5 4 1,081 5 CONSTRUCTIVE FEATURES: Zinc and plastic plated steel case and cover - Stainless steel forend - Nickel-plated steel dead bolt. WORKING: Key driven dead bolt. HAND: No hand. PROVIDED WITH: 3 keys, escutcheons cod. 0590 N, 2 forend spacers cod. 0624 N (forend 25 mm.) or 2 cod. 0625 N (forend 22 mm.), stainless steel fixing screws, assembling instructions. Chiavi lunghe - Long keys ----/1 5101/06 - +0,01 115 Serrature a doppia mappa per fasce Horizontal double-bit key locks Catenaccio e rullo regolabile - Dead and adjustable roller bolt CARATTERISTICHE COSTRUTTIVE: Scatola e coperchio in acciaio zincato e plastificato - Frontale in acciaio inox - Catenaccio in COD. EF AM acciaio nichelato - Rullo in ottone nichelato. FUNZIONAMENTO: Catenaccio comandato dalla chiave - Rullo 5935 90 2518637 5100/06 comandato a pressione o dalla chiave. MANO: Unica. 5935/F22 90 2218637 5100/06 PARTI IN DOTAZIONE: 3 chiavi, coppia borchie cod. 0590 N, 2 sottofrontali cod. 0624 N (frontale mm.25) oppure 2 cod. 0625 N (frontale mm.22), viti di fissaggio in acciaio inox, istruzioni di montaggio. mandate throws 4 1,181 5 4 1,161 5 CONSTRUCTIVE FEATURES: Zinc and plastic plated steel case and cover - Stainless steel forend - Nickel-plated steel dead bolt - Nickel-plated brass roller bolt. WORKING: Key driven dead bolt - Pressure or key driven roller bolt. HAND: No hand. PROVIDED WITH: 3 keys, escutcheons cod. 0590 N, 2 forend spacers cod. 0624 N (forend 25 mm.) or 2 cod. 0625 N (forend 22 mm.), Chiavi lunghe - Long keys 5101/06 - +0,01 ----/1 stainless steel fixing screws, assembling instructions. Catenaccio e scrocco regolabile 3 punti di chiusura Scrocco intercambiabile con rullo cod. 05935 - Dead and adjustable latch bolt 3 locking points Latch bolt interchangeable into roller bolt cod. 05935 CARATTERISTICHE COSTRUTTIVE: Scatola e coperchio in acciaio zincato e plastificato - Frontale in acciaio inox - Catenaccio in COD. EF AM acciaio nichelato - Scrocco in lega speciale nichelata - Ingegno mm.8. maniglia in acciaio brunito foro FUNZIONAMENTO: Catenaccio comandato dalla chiave - Scrocco 5960 90 2518637 5100/06 comandato dalla chiave o dalla maniglia. 5960/F22 90 2218637 5100/06 MANO: Reversibile. PARTI IN DOTAZIONE: 3 chiavi, coppia borchie cod. 0590 N, 2 sottofrontali cod. 0624 N (frontale mm.25) oppure 2 cod. 0625 N (frontale mm.22), viti di fissaggio in acciaio inox, istruzioni di montaggio. mandate throws 4 1,401 5 4 1,381 5 CONSTRUCTIVE FEATURES: Zinc and plastic plated steel case and cover - Stainless steel forend - Nickel-plated steel dead bolt - Special nickel-plated alloy latch bolt - Burnished steel square mm.8. spindle device WORKING: Key driven dead bolt - Handle or key driven latch bolt. HAND: Reversible. PROVIDED WITH: 3 keys, escutcheons cod. 0590 N, 2 forend spacers cod. 0624 N (forend 25 mm.) or 2 cod. 0625 N (forend 22 mm.), Chiavi lunghe - Long keys 5101/06 - +0,01 ----/1 stainless steel fixing screws, assembling instructions. 116 Serrature a doppia mappa per fasce Horizontal double-bit key locks Catenaccio 3 punti di chiusura - Dead bolt 3 locking points CARATTERISTICHE COSTRUTTIVE: Scatola e coperchio in acciaio zincato e plastificato - Frontale in acciaio inox - Catenaccio in COD. EF AM acciaio nichelato. FUNZIONAMENTO: Catenaccio comandato dalla chiave. 5961 90 2518637 5100/06 MANO: Unica. PARTI IN DOTAZIONE: 3 chiavi, coppia borchie cod. 0590 N, 5961/F22 90 2218637 5100/06 2 sottofrontali cod. 0624 N (frontale mm.25) oppure 2 cod. 0625 N (frontale mm.22), viti di fissaggio in acciaio inox, istruzioni di montaggio. mandate throws 4 1,191 5 4 1,171 5 CONSTRUCTIVE FEATURES: Zinc and plastic plated steel case and cover - Stainless steel forend - Nickel-plated steel dead bolt. WORKING: Key driven dead bolt. HAND: No hand. PROVIDED WITH: 3 keys, escutcheons cod. 0590 N, 2 forend spacers cod. 0624 N (forend 25 mm.) or 2 cod. 0625 N (forend 22 mm.), stainless steel fixing screws, assembling instructions. Chiavi lunghe - Long keys 5101/06 - +0,01 ----/1 Catenaccio e rullo regolabile 3 punti di chiusura - Dead and adjustable roller bolt 3 locking points CARATTERISTICHE COSTRUTTIVE: Scatola e coperchio in acciaio zincato e plastificato - Frontale in acciaio inox - Catenaccio in COD. EF AM acciaio nichelato - Rullo in ottone nichelato. FUNZIONAMENTO: Catenaccio comandato dalla chiave - Rullo 5965 90 2518637 5100/06 comandato a pressione o dalla chiave. MANO: Unica. 5965/F22 90 2218637 5100/06 PARTI IN DOTAZIONE: 3 chiavi, coppia borchie cod. 0590 N, 2 sottofrontali cod. 0624 N (frontale mm.25) oppure 2 cod. 0625 N (frontale mm.22), viti di fissaggio in acciaio inox, istruzioni di montaggio. CONSTRUCTIVE FEATURES: Zinc and plastic plated steel case and cover - Stainless steel forend - Nickel-plated steel dead bolt Nichel-plated brass roller bolt. WORKING: Key driven dead bolt - Pressure or key driven roller bolt. HAND: No hand. PROVIDED WITH: 3 keys, escutcheons cod. 0590 N, 2 forend spacers cod. 0624 N (forend 25 mm.) or 2 cod. 0625 N (forend 22 mm.), stainless steel fixing screws, assembling instructions. mandate throws 4 1,291 5 4 1,271 5 Chiavi lunghe - Long keys ----/1 5101/06 - +0,01 117 Serrature a doppia mappa per fasce Horizontal double-bit key locks Catenaccio e scrocco regolabile - Dead and adjustable latch bolt Scrocco intercambiabile con rullo cod. 05935 - Latch bolt interchangeable into roller bolt cod. 05935 CARATTERISTICHE COSTRUTTIVE: Scatola e coperchio in acciaio zincato e plastificato - Frontale in acciaio inox - Catenaccio in COD. EF AM acciaio nichelato - Scrocco in lega speciale nichelata - Ingegno mm.8. maniglia in acciaio brunito foro FUNZIONAMENTO: Catenaccio comandato dalla chiave - Scrocco 5940 90 2518637 5100/06 comandato dalla chiave o dalla maniglia. 5940/F22 90 2218637 5100/06 MANO: Reversibile. PARTI IN DOTAZIONE: 3 chiavi, coppia borchie cod. 0590 N, 2 sottofrontali cod. 0624 N (frontale mm.25) oppure 2 cod. 0625 N (frontale mm.22), viti di fissaggio in acciaio inox, istruzioni di montaggio. CONSTRUCTIVE FEATURES: Zinc and plastic plated steel case and cover - Stainless steel forend - Nickel-plated steel dead bolt - Special nickel-plated alloy latch bolt - Burnished steel square mm.8. spindle device WORKING: Key driven dead bolt - Handle or key driven latch bolt. HAND: Reversible. PROVIDED WITH: 3 keys, escutcheons cod. 0590 N, 2 forend spacers cod. 0624 N (forend 25 mm.) or 2 cod. 0625 N (forend 22 mm.), stainless steel fixing screws, assembling instructions. Catenaccio - mandate throws 4 1,121 5 4 1,101 5 Chiavi lunghe - Long keys ----/1 5101/06 - +0,01 Dead bolt CARATTERISTICHE COSTRUTTIVE: Scatola e coperchio in acciaio zincato e plastificato - Frontale in acciaio inox - Catenaccio in COD. EF AM acciaio nichelato. FUNZIONAMENTO: Catenaccio comandato dalla chiave. 5941 90 2518637 5100/06 MANO: Unica. PARTI IN DOTAZIONE: 3 chiavi, coppia borchie cod. 0590 N, 5941/F22 90 2218637 5100/06 2 sottofrontali cod. 0624 N (frontale mm.25) oppure 2 cod. 0625 N (frontale mm.22), viti di fissaggio in acciaio inox, istruzioni di montaggio. mandate throws 4 0,921 5 4 0,901 5 CONSTRUCTIVE FEATURES: Zinc and plastic plated steel case and cover - Stainless steel forend - Nickel-plated steel dead bolt. WORKING: Key driven dead bolt. HAND: No hand. PROVIDED WITH: 3 keys, escutcheons cod. 0590 N, 2 forend spacers cod. 0624 N (forend 25 mm.) or 2 cod. 0625 N (forend 22 mm.), stainless steel fixing screws, assembling instructions. Chiavi lunghe - Long keys 5101/06 - +0,01 ----/1 118 Serrature a doppia mappa per fasce Horizontal double-bit key locks Catenaccio e rullo regolabile - Dead and adjustable roller bolt CARATTERISTICHE COSTRUTTIVE: Scatola e coperchio in acciaio zincato e plastificato - Frontale in acciaio inox - Catenaccio in COD. EF AM acciaio nichelato - Rullo in ottone nichelato. FUNZIONAMENTO: Catenaccio comandato dalla chiave - Rullo 5945 90 2518637 5100/06 comandato a pressione o dalla chiave. MANO: Unica. 5945/F22 90 2218637 5100/06 PARTI IN DOTAZIONE: 3 chiavi, coppia borchie cod. 0590 N, 2 sottofrontali cod. 0624 N (frontale mm.25) oppure 2 cod. 0625 N (frontale mm.22), viti di fissaggio in acciaio inox, istruzioni di montaggio. mandate throws 4 1,001 5 4 0,981 5 CONSTRUCTIVE FEATURES: Zinc and plastic plated steel case and cover - Stainless steel forend - Nickel-plated steel dead bolt Nickel-plated brass roller bolt. WORKING: Key driven dead bolt - Pressure or key driven roller bolt. HAND: No hand. PROVIDED WITH: 3 keys, escutcheons cod. 0590 N, 2 forend spacers cod. 0624 N (forend 25 mm.) or 2 cod. 0625 N (forend 22 mm.), Chiavi lunghe - Long keys 5101/06 - +0,01 ----/1 stainless steel fixing screws, assembling instructions. Catenaccio e scrocco regolabile 3 punti di chiusura Scrocco intercambiabile con rullo cod. 05935 - Dead and adjustable latch bolt 3 locking points Latch bolt interchangeable into roller bolt cod. 05935 CARATTERISTICHE COSTRUTTIVE: Scatola e coperchio in acciaio zincato e plastificato - Frontale in acciaio inox - Catenaccio in COD. EF AM acciaio nichelato - Scrocco in lega speciale nichelata - Ingegno mm.8. maniglia in acciaio brunito foro FUNZIONAMENTO: Catenaccio comandato dalla chiave - Scrocco 5970 90 2518637 5100/06 comandato dalla chiave o dalla maniglia. 5970/F22 90 2218637 5100/06 MANO: Reversibile. PARTI IN DOTAZIONE: 3 chiavi, coppia borchie cod. 0590 N, 2 sottofrontali cod. 0624 N (frontale mm.25) oppure 2 cod. 0625 N (frontale mm.22), viti di fissaggio in acciaio inox, istruzioni di montaggio. mandate throws 4 1,201 5 4 1,181 5 CONSTRUCTIVE FEATURES: Zinc and plastic plated steel case and cover - Stainless steel forend - Nickel-plated steel dead bolt - Special nickel-plated alloy latch bolt - Burnished steel square mm.8. spindle device WORKING: Key driven dead bolt - Handle or key driven latch bolt. HAND: Reversible. PROVIDED WITH: 3 keys, escutcheons cod. 0590 N, 2 forend spacers cod. 0624 N (forend 25 mm.) or 2 cod. 0625 N (forend 22 mm.), Chiavi lunghe - Long keys 5101/06 - +0,01 ----/1 stainless steel fixing screws, assembling instructions. 119 Serrature a doppia mappa per fasce Horizontal double-bit key locks Catenaccio 3 punti di chiusura - Dead bolt 3 locking points CARATTERISTICHE COSTRUTTIVE: Scatola e coperchio in acciaio zincato e plastificato - Frontale in acciaio inox - Catenaccio in COD. EF AM acciaio nichelato. FUNZIONAMENTO: Catenaccio comandato dalla chiave. 5971 90 2518637 5100/06 MANO: Unica. PARTI IN DOTAZIONE: 3 chiavi, coppia borchie cod. 0590 N, 5971/F22 90 2218637 5100/06 2 sottofrontali cod. 0624 N (frontale mm.25) oppure 2 cod. 0625 N (frontale mm.22), viti di fissaggio in acciaio inox, istruzioni di montaggio. mandate throws 4 1,001 5 4 0,981 5 CONSTRUCTIVE FEATURES: Zinc and plastic plated steel case and cover - Stainless steel forend - Nickel-plated steel dead bolt. WORKING: Key driven dead bolt. HAND: No hand. PROVIDED WITH: 3 keys, escutcheons cod. 0590 N, 2 forend spacers cod. 0624 N (forend 25 mm.) or 2 cod. 0625 N (forend 22 mm.), stainless steel fixing screws, assembling instructions. Chiavi lunghe - Long keys 5101/06 - +0,01 ----/1 Catenaccio e rullo regolabile 3 punti di chiusura - Dead and adjustable roller bolt 3 locking points CARATTERISTICHE COSTRUTTIVE: Scatola e coperchio in acciaio zincato e plastificato - Frontale in acciaio inox - Catenaccio in COD. EF AM acciaio nichelato - Rullo in ottone nichelato. FUNZIONAMENTO: Catenaccio comandato dalla chiave - Rullo 5975 90 2518637 5100/06 comandato a pressione o dalla chiave. MANO: Unica. 5100/06 PARTI IN DOTAZIONE: 3 chiavi, coppia borchie cod. 0590 N, 5975/F22 90 2218637 2 sottofrontali cod. 0624 N (frontale mm.25) oppure 2 cod. 0625 N (frontale mm.22), viti di fissaggio in acciaio inox, istruzioni di montaggio. mandate throws 4 1,101 5 4 1,081 5 CONSTRUCTIVE FEATURES: Zinc and plastic plated steel case and cover - Stainless steel forend - Nickel-plated steel dead bolt Nickel-plated brass roller bolt. WORKING: Key driven dead bolt - Pressure or key driven roller bolt. HAND: No hand. PROVIDED WITH: 3 keys, escutcheons cod. 0590 N, 2 forend spacers cod. 0624 N (forend 25 mm.) or 2 cod. 0625 N (forend 22 mm.), stainless steel fixing screws, assembling instructions. Chiavi lunghe - Long keys 5101/06 - +0,01 ----/1 120 Serrature a doppia mappa per fasce Horizontal double-bit key locks Catenaccio e scrocco - Dead and latch bolt CARATTERISTICHE COSTRUTTIVE: Scatola e coperchio in acciaio zincato e plastificato - Frontale in acciaio inox - Catenaccio in COD. EF AM acciaio nichelato - Scrocco in ottone nichelato - Ingegno maniglia in acciaio brunito foro mm.8. 90 2518637 5100/06 FUNZIONAMENTO: Catenaccio comandato dalla chiave - Scrocco 5950 comandato dalla chiave o dalla maniglia. 5950/F22 90 2218637 5100/06 MANO: Reversibile. PARTI IN DOTAZIONE: 3 chiavi, coppia borchie cod. 0590 N, 2 sottofrontali cod. 0624 N (frontale mm.25) oppure 2 cod. 0625 N (frontale mm.22), viti di fissaggio in acciaio inox, istruzioni di montaggio. mandate throws 4 1,081 5 4 1,061 5 CONSTRUCTIVE FEATURES: Zinc and plastic plated steel case and cover - Stainless steel forend - Nickel-plated steel dead bolt - Nickel-plated brass latch bolt - Burnished steel square spindle device mm.8. WORKING: Key driven dead bolt - Handle or key driven latch bolt. HAND: Reversible. PROVIDED WITH: 3 keys, escutcheons cod. 0590 N, 2 forend spacers cod. 0624 N (forend 25 mm.) or 2 cod. 0625 N (forend 22 mm.), Chiavi lunghe - Long keys 5101/06 - +0,01 ----/1 stainless steel fixing screws, assembling instructions. Catenaccio - Dead bolt CARATTERISTICHE COSTRUTTIVE: Scatola e coperchio in acciaio zincato e plastificato - Frontale in acciaio inox - Catenaccio in COD. EF AM acciaio nichelato. FUNZIONAMENTO: Catenaccio comandato dalla chiave. 5951 90 2518637 5100/06 MANO: Unica. PARTI IN DOTAZIONE: 3 chiavi, coppia borchie cod. 0590 N, 5951/F22 90 2218637 5100/06 2 sottofrontali cod. 0624 N (frontale mm.25) oppure 2 cod. 0625 N (frontale mm.22), viti di fissaggio in acciaio inox, istruzioni di montaggio. mandate throws 4 0,881 5 4 0,861 5 CONSTRUCTIVE FEATURES: Zinc and plastic plated steel case and cover - Stainless steel forend - Nickel-plated steel dead bolt. WORKING: Key driven dead bolt. HAND: No hand. PROVIDED WITH: 3 keys, escutcheons cod. 0590 N, 2 forend spacers cod. 0624 N (forend 25 mm.) or 2 cod. 0625 N (forend 22 mm.), stainless steel fixing screws, assembling instructions. Chiavi lunghe - Long keys 5101/06 - +0,01 ----/1 121 Serrature a doppia mappa per fasce Horizontal double-bit key locks Catenaccio e scrocco 3 punti di chiusura - Dead and latch bolt 3 locking points CARATTERISTICHE COSTRUTTIVE: Scatola e coperchio in acciaio zincato e plastificato - Frontale in acciaio inox - Catenaccio in COD. EF AM acciaio nichelato - Scrocco in ottone nichelato - Ingegno maniglia in acciaio brunito foro mm.8. 90 2518637 5100/06 FUNZIONAMENTO: Catenaccio comandato dalla chiave - Scrocco 5980 comandato dalla chiave o dalla maniglia. 5980/F22 90 2218637 5100/06 MANO: Reversibile. PARTI IN DOTAZIONE: 3 chiavi, coppia borchie cod. 0590 N, 2 sottofrontali cod. 0624 N (frontale mm.25) oppure 2 cod. 0625 N (frontale mm.22), viti di fissaggio in acciaio inox, istruzioni di montaggio. mandate throws 4 1,161 5 4 1,141 5 CONSTRUCTIVE FEATURES: Zinc and plastic plated steel case and cover - Stainless steel forend - Nickel-plated steel dead bolt - Nickel-plated brass latch bolt - Burnished steel square spindle device mm.8. WORKING: Key driven dead bolt - Handle or key driven latch bolt. HAND: Reversible. PROVIDED WITH: 3 keys, escutcheons cod. 0590 N, 2 forend spacers cod. 0624 N (forend 25 mm.) or 2 cod. 0625 N (forend 22 mm.), ----/1 Chiavi lunghe - Long keys 5101/06 - +0,01 stainless steel fixing screws, assembling instructions. Catenaccio 3 punti di chiusura - Dead bolt 3 locking points CARATTERISTICHE COSTRUTTIVE: Scatola e coperchio in acciaio zincato e plastificato - Frontale in acciaio inox - Catenaccio in COD. EF AM acciaio nichelato. FUNZIONAMENTO: Catenaccio comandato dalla chiave. 5981 90 2518637 5100/06 MANO: Unica. PARTI IN DOTAZIONE: 3 chiavi, coppia borchie cod. 0590 N, 5981/F22 90 2218637 5100/06 2 sottofrontali cod. 0624 N (frontale mm.25) oppure 2 cod. 0625 N (frontale mm.22), viti di fissaggio in acciaio inox, istruzioni di montaggio. mandate throws 4 0,961 5 4 0,941 5 CONSTRUCTIVE FEATURES: Zinc and plastic plated steel case and cover - Stainless steel forend - Nickel-plated steel dead bolt. WORKING: Key driven dead bolt. HAND: No hand. PROVIDED WITH: 3 keys, escutcheons cod. 0590 N, 2 forend spacers cod. 0624 N (forend 25 mm.) or 2 cod. 0625 N (forend 22 mm.), stainless steel fixing screws, assembling instructions. Chiavi lunghe - Long keys 5101/06 - +0,01 ----/1 122 Elettroserrature a doppia mappa per fasce Horizontal double-bit key electric locks Catenaccio e scrocco - Dead and latch bolt CARATTERISTICHE COSTRUTTIVE: Scatola e coperchio in acciaio zincato e plastificato Frontale in acciaio inox - Catenaccio e pistone di ricarica in acciaio nichelato - Scrocco mm.8 - Bobina cod. 048 in ottone nichelato - Ingegno maniglia in acciaio brunito foro (12V-10W a.c.) CE. FUNZIONAMENTO: Catenaccio comandato dalla chiave - Scrocco comandato dalla chiave, dalla maniglia o dal comando elettrico a distanza - Il funzionamento è garantito anche in mancanza di corrente. MANO: Reversibile. PARTI IN DOTAZIONE: 3 chiavi, coppia borchie cod. 0590 N, 2 sottofrontali cod. 0624 N (frontale mm.25) oppure 2 cod. 0625 N (frontale mm.22), viti di fissaggio in acciaio inox, istruzioni di montaggio. CONSTRUCTIVE FEATURES: Zinc and plastic plated steel case and cover - Stainless steel forend - Nickel-plated steel dead bolt and piston - Nickel-plated brass latch bolt - Burnished steel square spindle device mm.8 - Coil set cod. 048 (12V-10W a.c.) CE. WORKING: Key driven dead bolt - Key, handle or remote control driven latch bolt Working is assured also without current. HAND: Reversible. PROVIDED WITH: 3 keys, escutcheons cod. 0590 N, 2 forend spacers cod. 0624 N (forend 25 mm.) or 2 cod. 0625 N (forend 22 mm.), stainless steel fixing screws, assembling instructions. COD. 5938 EF AM mandate throws 90 2518637 5100/06 4 1,331 5 5938/F22 90 2218637 5100/06 4 1,311 5 Chiavi lunghe - Long keys 5101/06 - +0,01 ----/1 Catenaccio e scrocco 3 punti di chiusura - Dead and latch bolt 3 locking points CARATTERISTICHE COSTRUTTIVE: Scatola e coperchio in acciaio zincato e plastificato Frontale in acciaio inox - Catenaccio e pistone di ricarica in acciaio nichelato - Scrocco mm.8 - Bobina cod. 048 in ottone nichelato - Ingegno maniglia in acciaio brunito foro (12V-10W a.c.) CE. FUNZIONAMENTO: Catenaccio comandato dalla chiave - Scrocco comandato dalla chiave, dalla maniglia o dal comando elettrico a distanza - Il funzionamento è garantito anche in mancanza di corrente. MANO: Reversibile. PARTI IN DOTAZIONE: 3 chiavi, coppia borchie cod. 0590 N, 2 sottofrontali cod. 0624 N (frontale mm.25) oppure 2 cod. 0625 N (frontale mm.22), viti di fissaggio in acciaio inox, istruzioni di montaggio. CONSTRUCTIVE FEATURES: Zinc and plastic plated steel case and cover - Stainless steel forend - Nickel-plated steel dead bolt and piston - Nickel-plated brass latch bolt - Burnished steel square spindle device mm.8 - Coil set cod. 048 (12V-10W a.c.) CE. WORKING: Key driven dead bolt - Key, handle or remote control driven latch bolt Working is assured also without current. HAND: Reversible. PROVIDED WITH: 3 keys, escutcheons cod. 0590 N, 2 forend spacers cod. 0624 N (forend 25 mm.) or 2 cod. 0625 N (forend 22 mm.), stainless steel fixing screws, assembling instructions. COD. 5968 EF AM mandate throws 90 2518637 5100/06 4 1,411 5 5968/F22 90 2218637 5100/06 4 1,391 5 Chiavi lunghe - Long keys 5101/06 - +0,01 ----/1 123 Elettroserrature a doppia mappa per fasce Horizontal double-bit key electric locks Catenaccio e scrocco - Dead and latch bolt CARATTERISTICHE COSTRUTTIVE: Scatola e coperchio in acciaio zincato e plastificato Frontale in acciaio inox - Catenaccio e pistone di ricarica in acciaio nichelato - Scrocco mm.8 - Bobina cod. 048 in ottone nichelato - Ingegno maniglia in acciaio brunito foro (12V-10W a.c.) CE. FUNZIONAMENTO: Catenaccio comandato dalla chiave - Scrocco comandato dalla chiave, dalla maniglia, dal comando elettrico a distanza o dal pulsante meccanico cod.058 - Il funzionamento è garantito anche in mancanza di corrente. FERMO A GIORNO: Con il pulsante meccanico cod.059 è consentito il bloccaggio dell’elettroserratura in posizione di “aperto”. MANO: Reversibile. PARTI IN DOTAZIONE: 3 chiavi, coppia borchie cod. 0590 N, 2 sottofrontali cod. 0624 N (frontale mm.25) oppure 2 cod. 0625 N (frontale mm.22), viti di fissaggio in acciaio inox, istruzioni di montaggio. CONSTRUCTIVE FEATURES: Zinc and plastic plated steel case and cover - Stainless steel forend - Nickel-plated steel dead bolt and piston - Nickel-plated brass latch bolt mm.8 - Coil set cod. 048 (12V-10W a.c.) CE. - Burnished steel square spindle device WORKING: Key driven dead bolt - Key, handle, remote control or push-button cod. 058 driven latch bolt - Working is assured also without current. HOLD OPEN DEVICE: With push-button cod. 059, it is possible to block the electric lock in its “open”position. HAND: Reversible. PROVIDED WITH: 3 keys, escutcheons cod. 0590 N, 2 forend spacers cod. 0624 N (forend 25 mm.) or 2 cod. 0625 N (forend 22 mm.), stainless steel fixing screws, assembling instructions. COD. 5948 EF AM mandate throws 90 2518637 5100/06 4 1,131 5 5948/F22 90 2218637 5100/06 4 1,111 5 Chiavi lunghe - Long keys ----/1 5101/06 - +0,01 Catenaccio e scrocco 3 punti di chiusura - Dead and latch bolt 3 locking points CARATTERISTICHE COSTRUTTIVE: Scatola e coperchio in acciaio zincato e plastificato Frontale in acciaio inox - Catenaccio e pistone di ricarica in acciaio nichelato - Scrocco mm.8 - Bobina cod. 048 in ottone nichelato - Ingegno maniglia in acciaio brunito foro (12V-10W a.c.) CE. FUNZIONAMENTO: Catenaccio comandato dalla chiave - Scrocco comandato dalla chiave, dalla maniglia, dal comando elettrico a distanza o dal pulsante meccanico cod.058 - Il funzionamento è garantito anche in mancanza di corrente. FERMO A GIORNO: Con il pulsante meccanico cod.059 è consentito il bloccaggio dell’elettroserratura in posizione di “aperto”. MANO: Reversibile. PARTI IN DOTAZIONE: 3 chiavi, coppia borchie cod. 0590 N, 2 sottofrontali cod. 0624 N (frontale mm.25) oppure 2 cod. 0625 N (frontale mm.22), viti di fissaggio in acciaio inox, istruzioni di montaggio. CONSTRUCTIVE FEATURES: Zinc and plastic plated steel case and cover - Stainless steel forend - Nickel-plated steel dead bolt and piston - Nickel-plated brass latch bolt mm.8 - Coil set cod. 048 (12V-10W a.c.) CE. - Burnished steel square spindle device WORKING: Key driven dead bolt - Key, handle, remote control or push-button cod. 058 driven latch bolt - Working is assured also without current. HOLD OPEN DEVICE: With push-button cod. 059, it is possible to block the electric lock in its “open”position. HAND: Reversible. PROVIDED WITH: 3 keys, escutcheons cod. 0590 N, 2 forend spacers cod. 0624 N (forend 25 mm.) or 2 cod. 0625 N (forend 22 mm.), stainless steel fixing screws, assembling instructions. COD. 5978 EF AM mandate throws 90 2518637 5100/06 4 1,211 5 5978/F22 90 2218637 5100/06 4 1,191 5 Chiavi lunghe - Long keys 5101/06 - +0,01 ----/1 124 Scr Adju Sc Adju 126 Serrature per montanti Vertical locks Scrocco regolabile ~ 5 mm Adjustable latch bolt ~ 5 mm Rullo cod. 0535 Roller bolt cod. 0535 Scrocco e rullo intercambiabili per serrature serie Interchangeable latch bolt/roller bolt for locks series cod. 338 - 358 - 4338 - 4530 - 530 - 540 Scrocco regolabile ~ 5 mm Adjustable latch bolt ~ 5 mm Rullo cod. 01435 Roller bolt cod. 01435 Scrocco e rullo intercambiabili per serrature serie Interchangeable latch bolt/roller bolt for locks series cod. 100020 - 100030 - 100040 100050 - 100060 - 100120 - 100130 100140 - 100150 - 100160 127 Serrature per montanti Vertical locks Catenaccio e scrocco - Dead and latch bolt CARATTERISTICHE COSTRUTTIVE: Scatola e coperchio in acciaio zincato e plastificato - Frontale in acciaio nichelato e cromato COD. - Catenaccio in acciaio nichelato - Scrocco in ottone nichelato mm.8. Ingegno maniglia in ottone foro 350 FUNZIONAMENTO: Catenaccio comandato dalla chiave - Scrocco comandato dalla maniglia. 350/F22 MANO: Reversibile. 330 PARTI IN DOTAZIONE: Vite cilindro. 151626 1110,5 210,281 10 330/F22 202231 1110,5 210,321 10 CONSTRUCTIVE FEATURES: Zinc and plastic plated steel case and cover - Nickel and chromium plated steel forend - Nickel-plated steel dead bolt - Nickel-plated brass latch bolt - Brass square mm.8. spindle device WORKING: Key driven dead bolt - Handle driven latch bolt. HAND: Reversible. PROVIDED WITH: Cylinder screw. Catenaccio e scrocco - M SCS mandate throws 152226 1110,5 210,301 10 201631 1110,5 210,301 10 Dead and latch bolt CARATTERISTICHE COSTRUTTIVE: Scatola e coperchio in acciaio zincato e plastificato - Frontale in acciaio nichelato e cromato COD. - Catenaccio in ottone nichelato - Scrocco in ottone nichelato mm.8. Ingegno maniglia in ottone foro 352 FUNZIONAMENTO: Catenaccio comandato dalla chiave - Scrocco comandato dalla maniglia. 352/F22 MANO: Reversibile. 332 PARTI IN DOTAZIONE: Vite cilindro. CONSTRUCTIVE FEATURES: Zinc and plastic plated steel case and 332/F22 cover - Nickel and chromium plated steel forend - Nickel-plated brass dead bolt - Nickel-plated brass latch bolt - Brass square spindle device mm.8. WORKING: Key driven dead bolt - Handle driven latch bolt. HAND: Reversible. PROVIDED WITH: Cylinder screw. 128 E F A E F A M SCS mandate throws 151626 1810,5 220,311 10 152226 1810,5 220,331 10 201631 1810,5 220,351 10 202231 1810,5 220,371 10 Serrature per montanti Vertical locks Catenaccio e scrocco regolabile - Dead and adjustable latch bolt Scrocco intercambiabile con rullo cod. 0535 - Latch bolt interchangeable into roller bolt cod. 0535 CARATTERISTICHE COSTRUTTIVE: Scatola e coperchio in acciaio zincato e plastificato - Frontale in acciaio nichelato e cromato - COD. Catenaccio in acciaio nichelato - Scrocco in lega speciale nichelata mm.8. - Ingegno maniglia in lega speciale zincata foro 338 FUNZIONAMENTO: Catenaccio comandato dalla chiave - Scrocco comandato dalla chiave o dalla maniglia. 338/F22 MANO: Reversibile. 530 PARTI IN DOTAZIONE: Vite cilindro. 251638 11 210,351 10 530/F22 302243 11 210,401 10 CONSTRUCTIVE FEATURES: Zinc and plastic plated steel case and cover - Nickel and chromium plated steel forend - Nickel-plated steel dead bolt - Special nickel-plated alloy latch bolt - Special mm.8. zinc-plated alloy square spindle device WORKING: Key driven dead bolt - Handle or key driven latch bolt. HAND: Reversible. PROVIDED WITH: Cylinder screw. Catenaccio e scrocco regolabile - EFAMS mandate throws 252238 11 210,371 10 301643 11 210,381 10 Dead and adjustable latch bolt Scrocco intercambiabile con rullo cod. 0535 - Latch bolt interchangeable into roller bolt cod. 0535 CARATTERISTICHE COSTRUTTIVE: Scatola e coperchio in acciaio mandate zincato e plastificato - Frontale in acciaio nichelato e cromato - COD. EFAMS throws Catenaccio in acciaio nichelato - Scrocco in lega speciale nichelata mm.8. - Ingegno maniglia in lega speciale zincata foro 358 25 16 38182 2 0,40 110 FUNZIONAMENTO: Catenaccio comandato dalla chiave - Scrocco comandato dalla chiave o dalla maniglia. 358/F22 25 22 38182 2 0,42 110 MANO: Reversibile. 540 30 16 43182 2 0,43 110 PARTI IN DOTAZIONE: Vite cilindro. 22 43182 2 0,45 110 CONSTRUCTIVE FEATURES: Zinc and plastic plated steel case and 540/F22 30 cover - Nickel and chromium plated steel forend - Nickel-plated steel dead bolt - Special nickel-plated alloy latch bolt - Special zinc-plated alloy square spindle device mm.8. WORKING: Key driven dead bolt - Handle or key driven latch bolt. HAND: Reversible. PROVIDED WITH: Cylinder screw. 129 Serrature per montanti Vertical locks Catenaccio e rullo regolabile - Dead and adjustable roller bolt CARATTERISTICHE COSTRUTTIVE: Scatola e coperchio in acciaio zincato e plastificato - Frontale in acciaio nichelato e cromato - COD. Catenaccio in acciaio nichelato - Rullo in ottone nichelato. FUNZIONAMENTO: Catenaccio comandato dalla chiave - Rullo 340 comandato a pressione. MANO: Unica. 340/F22 PARTI IN DOTAZIONE: Vite cilindro. 320 CONSTRUCTIVE FEATURES: Zinc and plastic plated steel case and cover - Nickel and chromium plated steel forend - Nickel-plated 320/F22 steel dead bolt - Nickel-plated brass roller bolt. WORKING: Key driven dead bolt - Pressure driven roller bolt. HAND: No hand. PROVIDED WITH: Cylinder screw. Catenaccio e rullo regolabile - EFAMS mandate throws 151626 11 210,271 10 152226 11 210,291 10 201631 11 210,291 10 202231 11 210,311 10 Dead and adjustable roller bolt CARATTERISTICHE COSTRUTTIVE: Scatola e coperchio in acciaio mandate zincato e plastificato - Frontale in acciaio nichelato e cromato - COD. EFAMS throws Catenaccio in ottone nichelato - Rullo in ottone nichelato. FUNZIONAMENTO: Catenaccio comandato dalla chiave - Rullo 342 15 16 26182 2 0,30 110 comandato a pressione. MANO: Unica. 342/F22 15 22 26182 2 0,32 110 PARTI IN DOTAZIONE: Vite cilindro. 322 20 16 31182 2 0,34 110 CONSTRUCTIVE FEATURES: Zinc and plastic plated steel case and 22 31182 2 0,36 110 cover - Nickel and chromium plated steel forend - Nickel-plated 322/F22 20 brass dead bolt - Nickel-plated brass roller bolt. WORKING: Key driven dead bolt - Pressure driven roller bolt. HAND: No hand. PROVIDED WITH: Cylinder screw. 130 Serrature per montanti Vertical locks Catenaccio e rullo regolabile - Dead and adjustable roller bolt CARATTERISTICHE COSTRUTTIVE: Scatola e coperchio in acciaio zincato e plastificato - Frontale in acciaio nichelato e cromato - COD. Catenaccio in acciaio nichelato - Rullo in ottone nichelato. FUNZIONAMENTO: Catenaccio comandato dalla chiave - Rullo 328 comandato a pressione o dalla chiave. MANO: Unica. 328/F22 PARTI IN DOTAZIONE: Vite cilindro. 535 CONSTRUCTIVE FEATURES: Zinc and plastic plated steel case and cover - Nickel and chromium plated steel forend - Nickel-plated 535/F22 steel dead bolt - Nickel-plated brass roller bolt. WORKING: Key driven dead bolt - Pressure or key driven roller bolt. HAND: No hand. PROVIDED WITH: Cylinder screw. Catenaccio e rullo regolabile - EFAMS mandate throws 251638 11 210,331 10 252238 11 210,351 10 301643 11 210,371 10 302243 11 210,391 10 Dead and adjustable roller bolt CARATTERISTICHE COSTRUTTIVE: Scatola e coperchio in acciaio mandate zincato e plastificato - Frontale in acciaio nichelato e cromato - COD. EFAMS throws Catenaccio in acciaio nichelato - Rullo in ottone nichelato. FUNZIONAMENTO: Catenaccio comandato dalla chiave - Rullo 348 25 16 38182 2 0,37 110 comandato a pressione o dalla chiave. MANO: Unica. 348/F22 25 22 38182 2 0,39 110 PARTI IN DOTAZIONE: Vite cilindro. 545 30 16 43182 2 0,42 110 CONSTRUCTIVE FEATURES: Zinc and plastic plated steel case and 22 43182 2 0,44 110 cover - Nickel and chromium plated steel forend - Nickel-plated 545/F22 30 steel dead bolt - Nickel-plated brass roller bolt. WORKING: Key driven dead bolt - Pressure or key driven roller bolt. HAND: No hand. PROVIDED WITH: Cylinder screw. 131 Serrature per montanti Vertical locks Catenaccio - Dead bolt CARATTERISTICHE COSTRUTTIVE: Scatola e coperchio in acciaio mandate zincato e plastificato - Frontale in acciaio nichelato e cromato - COD. EFAMS throws Catenaccio in acciaio nichelato. FUNZIONAMENTO: Catenaccio comandato dalla chiave. 355 151626 11 210,171 10 MANO: Unica. PARTI IN DOTAZIONE: Vite cilindro. 355/F22 15 22 26112 1 0,19 110 CONSTRUCTIVE FEATURES: Zinc and plastic plated steel case and cover - Nickel and chromium plated steel forend - Nickel-plated steel dead bolt. WORKING: Key driven dead bolt. HAND: No hand. PROVIDED WITH: Cylinder screw. 335 20 16 31112 1 0,19 110 22 31112 1 0,21 110 335/F22 20 339 25 16 38112 1 0,21 110 339/F22 25 22 38112 1 0,23 110 531 30 16 43112 1 0,25 110 531/F22 30 22 43112 1 0,27 110 Catenaccio - Dead bolt CARATTERISTICHE COSTRUTTIVE: Scatola e coperchio in acciaio mandate zincato e plastificato - Frontale in acciaio nichelato e cromato - COD. EFAMS throws Catenaccio in acciaio nichelato od ottone nichelato. FUNZIONAMENTO: Catenaccio comandato dalla chiave. 354 15 16 26182 2 0,21 110 MANO: Unica. PARTI IN DOTAZIONE: Vite cilindro. 354/F22 15 22 26182 2 0,23 110 CONSTRUCTIVE FEATURES: Zinc and plastic plated steel case and cover - Nickel and chromium plated steel forend - Nickel-plated steel or nickel-plated brass dead bolt. WORKING: Key driven dead bolt. HAND: No hand. PROVIDED WITH: Cylinder screw. 334 20 16 31182 2 0,23 110 22 31182 2 0,25 110 334/F22 20 359 25 16 38182 2 0,25 110 359/F22 25 22 38182 2 0,27 110 541 30 16 43182 2 0,29 110 541/F22 30 22 43182 2 0,31 110 132 Serrature per montanti Vertical locks Scrocco - Latch bolt CARATTERISTICHE COSTRUTTIVE: Scatola e coperchio in acciaio zincato e plastificato - Frontale in acciaio nichelato e cromato - COD. Scrocco in ottone nichelato. FUNZIONAMENTO: Scrocco comandato dalla chiave. 357 MANO: Reversibile. PARTI IN DOTAZIONE: Vite cilindro. 357/F22 CONSTRUCTIVE FEATURES: Zinc and plastic plated steel case and cover - Nickel and chromium plated steel forend - Nickel-plated brass latch bolt. WORKING: Key driven latch bolt. HAND: Reversible. PROVIDED WITH: Cylinder screw. Gancio - EFASC 151626 10,5 0,141 10 152226 10,5 0,161 10 337 201631 10,5 0,151 10 337/F22 202231 10,5 0,171 10 327 251638 10,5 0,171 10 327/F22 252238 10,5 0,191 10 Hook bolt CARATTERISTICHE COSTRUTTIVE: Scatola e coperchio in acciaio zincato e plastificato - Frontale in acciaio nichelato e cromato - COD. Gancio in lega speciale nichelata. FUNZIONAMENTO: Gancio comandato dalla chiave. 356 MANO: Unica. PARTI IN DOTAZIONE: Vite cilindro. 356/F22 E F A mandate throws 151626 10,191 10 152226 10,211 10 CONSTRUCTIVE FEATURES: Zinc and plastic plated steel case and cover - Nickel and chromium plated steel forend - Special nickelplated alloy hook bolt. WORKING: Key driven hook bolt. HAND: No hand. PROVIDED WITH: Cylinder screw. 133 Serrature per montanti Vertical locks Scrocco - Latch bolt CARATTERISTICHE COSTRUTTIVE: Scatola e coperchio in acciaio zincato e plastificato - Frontale in acciaio nichelato e COD. cromato - Scrocco in ottone nichelato - Ingegno maniglia in ottone foro mm.8. 351 FUNZIONAMENTO: Scrocco comandato dalla maniglia. MANO: Reversibile. 351/F22 PARTI IN DOTAZIONE: / EFASC 151626 10,5 0,152 20 152226 10,5 0,172 20 CONSTRUCTIVE FEATURES: Zinc and plastic plated steel case and cover - Nickel and chromium plated steel forend - Nickel-plated brass latch bolt - Brass square spindle device mm.8. WORKING: Handle driven latch bolt. HAND: Reversible. PROVIDED WITH: / Rullo regolabile - Adjustable roller bolt CARATTERISTICHE COSTRUTTIVE: Scatola e coperchio in acciaio zincato e plastificato - Frontale in acciaio nichelato e cromato - COD.FA Rullo in ottone nichelato. FUNZIONAMENTO: Rullo comandato a pressione. 34516 260,14 220 MANO: Unica. PARTI IN DOTAZIONE: / 345/F2222 260,16 220 CONSTRUCTIVE FEATURES: Zinc and plastic plated steel case and cover - Nickel and chromium plated steel forend - Nickel-plated brass roller bolt. WORKING: Pressure driven roller bolt. HAND: No hand. PROVIDED WITH: / 134 Serrature per montanti Vertical locks Catenaccio e scrocco - Dead and latch bolt CARATTERISTICHE COSTRUTTIVE: Scatola e coperchio in acciaio zincato e plastificato - Frontale in acciaio nichelato e cromato COD. EF AM - Catenaccio in acciaio nichelato - Scrocco in ottone nichelato Ingegno maniglia in ottone foro mm.8 - Cilindro a spillo cod. 4350 15162611 4100 4054 o 4054/1 (con chiavi lunghe). FUNZIONAMENTO: Catenaccio comandato dalla chiave - Scrocco 4350/F22 15222611 4100 comandato dalla maniglia. 4330 20163111 4100 MANO: Reversibile. PARTI IN DOTAZIONE: 3 chiavi, 2 borchie cod. 0441 N. 4330/F22 20223111 CONSTRUCTIVE FEATURES: Zinc and plastic plated steel case and cover - Nickel and chromium plated steel forend - Nickel-plated steel dead bolt - Nickel-plated brass latch bolt - Brass square spindle device mm.8 - Cross cylinder cod. 4054 or 4054/1 (with long keys). WORKING: Key driven dead bolt - Handle driven latch bolt. HAND: Reversible. Chiavi lunghe - Long keys PROVIDED WITH: 3 keys, 2 escutcheons cod. 0441 N. ----/1 Catenaccio e scrocco regolabile - mandate throws 10,371 10 10,391 10 10,391 10 4100 10,411 10 4101 - +0,02 Dead and adjustable latch bolt Scrocco intercambiabile con rullo cod. 0535 - Latch bolt interchangeable into roller bolt cod. 0535 CARATTERISTICHE COSTRUTTIVE: Scatola e coperchio in acciaio zincato e plastificato - Frontale in acciaio nichelato e cromato - COD. EF AM Catenaccio in acciaio nichelato - Scrocco in lega speciale nichelata - Ingegno maniglia in lega speciale zincata foro mm.8 - Cilindro 4338 25163811 4100 a spillo cod. 4054 o 4054/1 (con chiavi lunghe). FUNZIONAMENTO: Catenaccio comandato dalla chiave - Scrocco 4338/F22 25223811 4100 comandato dalla chiave o dalla maniglia. 4530 30164311 4100 MANO: Reversibile. PARTI IN DOTAZIONE: 3 chiavi, 2 borchie cod. 0441 N. 4530/F22 30224311 CONSTRUCTIVE FEATURES: Zinc and plastic plated steel case and cover - Nickel and chromium plated steel forend - Nickel-plated steel dead bolt - Special nickel-plated alloy latch bolt - Special zinc-plated alloy square spindle device mm.8 - Cross cylinder cod. 4054 or 4054/1 (with long keys). WORKING: Key driven dead bolt - Handle or key driven latch bolt. HAND: Reversible. Chiavi lunghe - Long keys PROVIDED WITH: 3 keys, 2 escutcheons cod. 0441 N. ----/1 mandate throws 10,441 10 10,461 10 10,471 10 4100 10,491 10 4101 - +0,02 135 Serrature per montanti Vertical locks Catenaccio e rullo regolabile - Dead and adjustable roller bolt CARATTERISTICHE COSTRUTTIVE: Scatola e coperchio in acciaio zincato e plastificato - Frontale in acciaio nichelato e cromato - COD. EF AM Catenaccio in acciaio nichelato - Rullo in ottone nichelato - Cilindro a spillo cod. 4054 o 4054/1 (con chiavi lunghe). 4340 15162611 4100 FUNZIONAMENTO: Catenaccio comandato dalla chiave - Rullo comandato a pressione. 4340/F22 15222611 4100 MANO: Unica. 4320 20163111 4100 PARTI IN DOTAZIONE: 3 chiavi, 2 borchie cod. 0441 N. CONSTRUCTIVE FEATURES: Zinc and plastic plated steel case and 4320/F22 20223111 cover - Nickel and chromium plated steel forend - Nickel-plated mandate throws 10,361 10 10,381 10 10,381 10 4100 10,401 10 4101 - +0,02 steel dead bolt - Nickel-plated brass roller bolt - Cross cylinder cod. 4054 or 4054/1 (with long keys). WORKING: Key driven dead bolt - Pressure driven roller bolt. HAND: No hand. PROVIDED WITH: 3 keys, 2 escutcheons cod. 0441 N. Chiavi lunghe - Long keys ----/1 Catenaccio e rullo regolabile - Dead and adjustable roller bolt CARATTERISTICHE COSTRUTTIVE: Scatola e coperchio in acciaio zincato e plastificato - Frontale in acciaio nichelato e cromato - COD. EF AM Catenaccio in acciaio nichelato - Rullo in ottone nichelato - Cilindro a spillo cod. 4054 o 4054/1 (con chiavi lunghe). 4328 25163811 4100 FUNZIONAMENTO: Catenaccio comandato dalla chiave - Rullo comandato a pressione o dalla chiave. 4328/F22 25223811 4100 MANO: Unica. 4535 30164311 4100 PARTI IN DOTAZIONE: 3 chiavi, 2 borchie cod. 0441 N. CONSTRUCTIVE FEATURES: Zinc and plastic plated steel case and 4535/F22 30224311 cover - Nickel and chromium plated steel forend - Nickel-plated steel dead bolt - Nickel-plated brass roller bolt - Cross cylinder cod. 4054 or 4054/1 (with long keys). WORKING: Key driven dead bolt - Pressure or key driven roller bolt. HAND: No hand. PROVIDED WITH: 3 keys, 2 escutcheons cod. 0441 N. Chiavi lunghe - Long keys ----/1 136 mandate throws 10,421 10 10,441 10 10,461 10 4100 10,481 10 4101 - +0,02 Serrature per montanti Vertical locks Catenaccio - Dead bolt CARATTERISTICHE COSTRUTTIVE: Scatola e coperchio in acciaio zincato e plastificato - Frontale in acciaio nichelato e cromato COD. EF AM - Catenaccio in acciaio nichelato - Cilindro a spillo cod. 4054 o 4054/1 (con chiavi lunghe). 4355 15162611 4100 FUNZIONAMENTO: Catenaccio comandato dalla chiave. MANO: Unica. 4355/F22 15222611 4100 PARTI IN DOTAZIONE: 3 chiavi, 2 borchie cod. 0441 N. 4335 20163111 throws 10,261 10 10,281 10 4100 10,281 10 4100 10,301 10 4100 10,301 10 4100 10,321 10 30164311 4100 10,341 10 4531/F22 30224311 4100 10,361 10 Chiavi lunghe - Long keys ----/1 4101 - +0,02 CONSTRUCTIVE FEATURES: Zinc and plastic plated steel case and cover - Nickel and chromium plated steel forend - Nickel-plated steel 4335/F22 20223111 dead bolt - Cross cylinder cod. 4054 or 4054/1 (with long keys). 4339 25163811 WORKING: Key driven dead bolt. 4339/F22 25223811 HAND: No hand. PROVIDED WITH: 3 keys, 2 escutcheons cod. 0441 N. 4531 Gancio - mandate Hook bolt CARATTERISTICHE COSTRUTTIVE: Scatola e coperchio in acciaio zincato e plastificato - Frontale in acciaio nichelato e cromato - COD. EFA Gancio in lega speciale nichelata - Cilindro a spillo cod. 4054 o 4054/1 (con chiavi lunghe). 4356 151626 4100 FUNZIONAMENTO: Gancio comandato dalla chiave. MANO: Unica. 4356/F22 152226 4100 PARTI IN DOTAZIONE: 3 chiavi, 2 borchie cod.0441 N. mandate throws 10,281 10 10,301 10 CONSTRUCTIVE FEATURES: Zinc and plastic plated steel case and cover - Nickel and chromium plated steel forend - Special nickel-plated alloy hook bolt - Cross cylinder cod. 4054 or 4054/1 (with long keys). WORKING: Key driven hook bolt. HAND: No hand. PROVIDED WITH: 3 keys, 2 escutcheons cod. 0441 N. Chiavi lunghe - Long keys ----/1 4101 - +0,02 137 Serrature per montanti Vertical locks Catenaccio - Dead bolt CARATTERISTICHE COSTRUTTIVE: Scatola e coperchio in acciaio verniciato - Frontale in acciaio nichelato e cromato - Catenaccio COD. EF AM in acciaio nichelato . FUNZIONAMENTO: Catenaccio comandato dalla chiave. 4621/F20 20203622 4100 MANO: Unica. PARTI IN DOTAZIONE: 3 chiavi, 2 borchie cod. 0441 N, contropiastra 02014 A mandate throws 10,331 10 CONSTRUCTIVE FEATURES: Painted plated steel case and cover - Nickel and chromium plated steel forend - Nickel-plated steel dead bolt . WORKING: Key driven dead bolt. HAND: No hand. PROVIDED WITH: 3 keys, 2 escutcheons cod. 0441 N, striking plate 02014 A Gancio - Hook bolt CARATTERISTICHE COSTRUTTIVE: Scatola e coperchio in acciaio verniciato - Frontale in acciaio nichelato e cromato - Gancio in COD. EFA acciaio nichelato. FUNZIONAMENTO: Gancio comandato dalla chiave. 4626/F20 202036 4100 MANO: Unica. PARTI IN DOTAZIONE: 3 chiavi, 2 borchie cod. 0441 N, contropiastra 02019 A CONSTRUCTIVE FEATURES: Painted plated steel case and cover Nickel and chromium plated steel forend - Nickel-plated steel hook bolt. WORKING: Key driven hook bolt. HAND: No hand. PROVIDED WITH: 3 keys, 2 escutcheons cod. 0441 N, striking plate 02019 A 138 mandate throws 10,321 10 Serrature per montanti Vertical locks Catenaccio e scrocco regolabile - Dead and adjustable latch bolt Scrocco intercambiabile con rullo cod. 01435 - Latch bolt interchangeable into roller bolt cod. 01435 CARATTERISTICHE COSTRUTTIVE: Scatola e coperchio in acciaio zincato e plastificato - Frontale in acciaio nichelato e cromato - COD. Catenaccio e scrocco in lega speciale nichelata - Ingegno maniglia in lega speciale zincata foro mm.8. 100020 FUNZIONAMENTO: Catenaccio comandato dalla chiave - Scrocco comandato dalla chiave o dalla maniglia. 100030 MANO: Reversibile. 100040 PARTI IN DOTAZIONE: Vite cilindro. EFAM mandate throws 20 22 35151 0,42 15 25 22 40151 0,45 15 30 22 45151 0,48 15 22 50151 0,51 15 CONSTRUCTIVE FEATURES: Zinc and plastic plated steel case and 100050 35 cover - Nickel and chromium plated steel forend - Special nickel- 100060 40 22 55151 0,54 15 plated alloy latch bolt and dead bolt - Special zinc-plated alloy square spindle device mm.8. WORKING: Key driven dead bolt - Handle or key driven latch bolt. HAND: Reversible. PROVIDED WITH: Cylinder screw. Catenaccio e scrocco regolabile - Dead and adjustable latch bolt Scrocco intercambiabile con rullo cod. 01435 Frontale inox - Stainless steel forend - Latch bolt interchangeable into roller bolt cod. 01435 CARATTERISTICHE COSTRUTTIVE: Scatola e coperchio in acciaio zincato e plastificato - Frontale in acciaio inox - Catenaccio COD. e scrocco in lega speciale nichelata - Ingegno maniglia in lega speciale zincata foro mm.8. 100120 FUNZIONAMENTO: Catenaccio comandato dalla chiave - Scrocco comandato dalla chiave o dalla maniglia. 100130 MANO: Reversibile. 100140 PARTI IN DOTAZIONE: Vite cilindro. CONSTRUCTIVE FEATURES: Zinc and plastic plated steel case 100150 and cover - Stainless steel forend - Special nickel-plated alloy 100160 latch bolt and dead bolt - Special zinc-plated alloy square spindle device mm.8. WORKING: Key driven dead bolt - Handle or key driven latch bolt. HAND: Reversible. PROVIDED WITH: Cylinder screw. EFAM mandate throws 20 22 35151 0,42 15 25 22 40151 0,45 15 30 22 45151 0,48 15 35 22 50151 0,51 15 40 22 55151 0,54 15 139 Serrature per montanti Vertical locks Catenaccio e rullo regolabile - Dead and adjustable roller bolt CARATTERISTICHE COSTRUTTIVE: Scatola e coperchio in acciaio zincato e plastificato - Frontale in acciaio nichelato e cromato - COD. Catenaccio in lega speciale nichelata - Rullo in ottone nichelato. FUNZIONAMENTO: Catenaccio comandato dalla chiave - Rullo 100025 comandato a pressione o dalla chiave. MANO: Unica. 100035 PARTI IN DOTAZIONE: Vite cilindro. EFAM mandate throws 20 22 35151 0,42 15 25 22 40151 0,45 15 100045 30 22 45151 0,48 15 CONSTRUCTIVE FEATURES: Zinc and plastic plated steel case and cover - Nickel and chromium plated steel forend - Special nickel- 100055 plated alloy dead bolt - Nickel-plated brass roller bolt. 100065 WORKING: Key driven dead bolt - Pressure or key driven roller bolt. HAND: No hand. PROVIDED WITH: Cylinder screw. Catenaccio e rullo regolabile Frontale inox - 35 22 50151 0,51 15 40 22 55151 0,54 15 Dead and adjustable roller bolt Stainless steel forend CARATTERISTICHE COSTRUTTIVE: Scatola e coperchio in acciaio zincato e plastificato - Frontale in acciaio inox - Catenaccio in lega COD. speciale nichelata - Rullo in ottone nichelato. FUNZIONAMENTO: Catenaccio comandato dalla chiave - Rullo 100125 comandato a pressione o dalla chiave. MANO: Unica. 100135 PARTI IN DOTAZIONE: Vite cilindro. EFAM mandate throws 20 22 35151 0,42 15 25 22 40151 0,45 15 100145 30 22 45151 0,48 15 CONSTRUCTIVE FEATURES: Zinc and plastic plated steel case and cover - Stainless steel forend - Special nickel-plated alloy dead 100155 bolt - Nickel-plated brass roller bolt. 100165 WORKING: Key driven dead bolt - Pressure or key driven roller bolt. HAND: No hand. PROVIDED WITH: Cylinder screw. 140 35 22 50151 0,51 15 40 22 55151 0,54 15 Serrature per montanti Vertical locks Catenaccio - Dead bolt CARATTERISTICHE COSTRUTTIVE: Scatola e coperchio in acciaio zincato e plastificato - Frontale in acciaio nichelato e cromato - COD. Catenaccio in lega speciale nichelata. FUNZIONAMENTO: Catenaccio comandato dalla chiave. 100021 MANO: Unica. PARTI IN DOTAZIONE: Vite cilindro. 100031 CONSTRUCTIVE FEATURES: Zinc and plastic plated steel case and 100041 cover - Nickel and chromium plated steel forend - Special nickel100051 plated alloy dead bolt. WORKING: Key driven dead bolt. 100061 HAND: No hand. PROVIDED WITH: Cylinder screw. Catenaccio - Frontale inox - EFAM mandate throws 20 22 35151 0,26 110 25 22 40151 0,28 110 30 22 45151 0,30 110 35 22 50151 0,32 110 40 22 55151 0,34 110 Dead bolt Stainless steel forend CARATTERISTICHE COSTRUTTIVE: Scatola e coperchio in acciaio zincato e plastificato - Frontale in acciaio inox - Catenaccio in lega COD. speciale nichelata. FUNZIONAMENTO: Catenaccio comandato dalla chiave. 100121 MANO: Unica. PARTI IN DOTAZIONE: Vite cilindro. 100131 CONSTRUCTIVE FEATURES: Zinc and plastic plated steel case 100141 and cover - Stainless steel forend - Special nickel-plated alloy 100151 dead bolt. WORKING: Key driven dead bolt. 100161 HAND: No hand. PROVIDED WITH: Cylinder screw. EFAM mandate throws 20 22 35151 0,26 110 25 22 40151 0,28 110 30 22 45151 0,30 110 35 22 50151 0,32 110 40 22 55151 0,34 110 141 Serrature di sicurezza per montanti Vertical security locks Scrocco e rullo intercambiabili - Interchangeable latch bolt/roller bolt Scrocco regolabile ~ 5 mm Adjustable latch bolt ~ 5 mm COD. Per serrature serie cod. cod. For locks series cod. 01431 1430 - 1440 - 1450 - 1460 - 1470 - 1480 4430 - 4440 - 4450 - 4460 - 4470 - 4480 tappo - plug Rullo cod. 01435 01435 Roller bolt cod. 01435 rullo - roller bolt Tappo cod. 01431 Plug cod. 01431 Montaggio cilindro a spillo - Cross key cylinder assembly Cilindro a spillo cod. Per serrature serie cod. Cross key cylinder cod. For locks series cod. 4052 4052/1 con chiavi lunghe long keys 142 1430 - 1431 - 1435 - 1436 - 1437 - 14379 - 1438 - 1439 1440 - 1441 - 1445 - 1446 - 1447 - 14479 - 1448 - 1449 1450 - 1451 - 1455 - 1456 - 1457 - 14579 - 1458 - 1459 1460 - 1461 - 1462 - 1465 - 1466 - 1467 - 1468 - 1470 1471 - 1472 - 1475 - 1476 - 1477 - 1478 - 1480 - 1481 1482 - 1485 - 1486 - 1487 - 1488 Serrature di sicurezza per montanti Vertical security locks Catenaccio e scrocco regolabile - Dead and adjustable latch bolt Scrocco intercambiabile con rullo cod. 01435 - CARATTERISTICHE COSTRUTTIVE: Scatola e coperchio in acciaio zincato e plastificato - Frontale in acciaio inox - Catenaccio autocentrante in acciaio nichelato con sistema antiscasso - Scrocco in lega speciale nichelata - Ingegno maniglia in lega speciale zincata foro mm.8. FUNZIONAMENTO: Catenaccio comandato dalla chiave - Scrocco comandato dalla chiave o dalla maniglia. MANO: Reversibile. PARTI IN DOTAZIONE: 2 borchie cod. 0120 N, sottofrontale cod. 0623 N (frontale 25 mm.) oppure 2 cod. 0625 N (frontale 22 mm.), vite cilindro, viti di fissaggio in acciaio inox, istruzioni di montaggio. Latch bolt interchangeable into roller bolt cod. 01435 COD. 1430 EFAM mandate throws 25 25 40241 0,59 15 1430/F2225 22 40241 0,57 15 1440 30 25 45241 0,62 15 22 45241 0,60 15 1440/F2230 35 25 50241 0,64 15 CONSTRUCTIVE FEATURES: Zinc and plastic plated steel case and 1450 cover - Stainless steel forend - Nickel-plated steel self-centering 22 50241 0,62 15 dead bolt with lock-picking system - Special nickel-plated alloy latch 1450/F2235 bolt - Special zinc-plated alloy square spindle device mm.8. WORKING: Key driven dead bolt - Handle or key driven latch bolt. HAND: Reversible. PROVIDED WITH: 2 roses cod. 0120 N, forend spacer cod. 0623 N (forend 25 mm.) or 2 cod. 0625 N (forend 22 mm.), cylinder screw, stainless steel fixing screws, assembling instructions. Catenaccio - Dead bolt CARATTERISTICHE COSTRUTTIVE: Scatola e coperchio in acciaio mandate zincato e plastificato - Frontale in acciaio inox - Catenaccio COD. EFAM throws autocentrante in acciaio nichelato con sistema antiscasso. FUNZIONAMENTO: Catenaccio comandato dalla chiave. 1431 25 25 40241 0,51 15 MANO: Unica. PARTI IN DOTAZIONE: 2 borchie cod. 0120 N, sottofrontale cod. 1431/F2225 22 40241 0,49 15 0623 N (frontale 25 mm.) oppure 2 cod. 0625 N (frontale 22 mm.), 30 25 45241 0,54 15 vite cilindro, viti di fissaggio in acciaio inox, istruzioni di montaggio. 1441 22 45241 0,52 15 CONSTRUCTIVE FEATURES: Zinc and plastic plated steel case and 1441/F2230 cover - Stainless steel forend - Nickel-plated steel self-centering 1451 35 25 50241 0,57 15 dead bolt with lock-picking system. 1451/F2235 22 50241 0,55 15 WORKING: Key driven dead bolt. HAND: No hand. PROVIDED WITH: 2 roses cod. 0120 N, forend spacer cod. 0623 N (forend 25 mm.) or 2 cod. 0625 N (forend 22 mm.), cylinder screw, stainless steel fixing screws, assembling instructions. 143 Serrature di sicurezza per montanti Vertical security locks Catenaccio e rullo regolabile - Dead and adjustable roller bolt CARATTERISTICHE COSTRUTTIVE: Scatola e coperchio in acciaio zincato e plastificato - Frontale in acciaio inox - Catenaccio autocentrante in acciaio nichelato con sistema antiscasso - Rullo in ottone nichelato. FUNZIONAMENTO: Catenaccio comandato dalla chiave - Rullo comandato a pressione o dalla chiave. MANO: Unica. PARTI IN DOTAZIONE: 2 borchie cod. 0120 N, sottofrontale cod. 0623 N (frontale 25 mm.) oppure 2 cod. 0625 N (frontale 22 mm.), vite cilindro, viti di fissaggio in acciaio inox, istruzioni di montaggio. COD. 1435 EFAM mandate throws 25 25 40241 0,59 15 1435/F2225 22 40241 0,57 15 1445 30 25 45241 0,62 15 22 45241 0,60 15 1445/F2230 1455 35 25 50241 0,64 15 CONSTRUCTIVE FEATURES: Zinc and plastic plated steel case and cover - Stainless steel forend - Nickel-plated steel self-centering 1455/F2235 22 50241 0,62 15 dead bolt with lock-picking system - Nickel-plated brass roller bolt. WORKING: Key driven dead bolt - Pressure or key driven roller bolt. HAND: No hand. PROVIDED WITH: 2 roses cod. 0120 N, forend spacer cod. 0623 N (forend 25 mm.) or 2 cod. 0625 N (forend 22 mm.), cylinder screw, stainless steel fixing screws, assembling instructions. Gancio - Hook bolt CARATTERISTICHE COSTRUTTIVE: Scatola e coperchio in acciaio mandate zincato e plastificato - Frontale in acciaio inox - Gancio in acciaio COD. E F A throws nichelato. FUNZIONAMENTO: Gancio comandato dalla chiave. 1436 252540 10,511 5 MANO: Unica. PARTI IN DOTAZIONE: 2 borchie cod. 0120 N, sottofrontale cod. 1436/F22 252240 10,491 5 0623 N (frontale 25 mm.) oppure 2 cod. 0625 N (frontale 22 mm.), 302545 10,521 5 vite cilindro, viti di fissaggio in acciaio inox, istruzioni di montaggio. 1446 CONSTRUCTIVE FEATURES: Zinc and plastic plated steel case 1446/F22 302245 10,501 5 and cover - Stainless steel forend - Nickel-plated steel hook bolt. 1456 352550 10,561 5 WORKING: Key driven hook bolt. 1456/F22 352250 10,541 5 HAND: No hand. PROVIDED WITH: 2 roses cod. 0120 N, forend spacer cod. 0623 N (forend 25 mm.) or 2 cod. 0625 N (forend 22 mm.), cylinder screw, stainless steel fixing screws, assembling instructions. 144 Serrature di sicurezza per montanti Vertical security locks Catenaccio e scrocco regolabile 3 punti di chiusura Scrocco intercambiabile con rullo cod. 01435 - CARATTERISTICHE COSTRUTTIVE: Scatola e coperchio in acciaio zincato e plastificato - Frontale in acciaio inox - Catenaccio autocentrante in acciaio nichelato con sistema antiscasso Scrocco in lega speciale nichelata - Ingegno maniglia in lega speciale zincata foro mm.8. FUNZIONAMENTO: Catenaccio comandato dalla chiave - Scrocco comandato dalla chiave o dalla maniglia. MANO: Reversibile. PARTI IN DOTAZIONE: 2 borchie cod. 0120 N, sottofrontale cod. 0623 N (frontale 25 mm.) oppure 2 cod. 0625 N (frontale 22 mm.), vite cilindro, viti di fissaggio in acciaio inox, istruzioni di montaggio. Dead and adjustable latch bolt 3 locking points Latch bolt interchangeable into roller bolt cod. 01435 COD. 1460 EFAM mandate throws 25 25 40241 0,65 15 1460/F2225 22 40241 0,63 15 1470 30 25 45241 0,68 15 22 45241 0,66 15 1470/F2230 35 25 50241 0,71 15 CONSTRUCTIVE FEATURES: Zinc and plastic plated steel case and 1480 cover - Stainless steel forend - Nickel-plated steel self-centering 22 50241 0,69 15 dead bolt with lock-picking system - Special nickel-plated alloy 1480/F2235 latch bolt - Special zinc-plated alloy square spindle device mm.8. WORKING: Key driven dead bolt - Handle or key driven latch bolt. HAND: Reversible. PROVIDED WITH: 2 roses cod. 0120 N, forend spacer cod. 0623 N (forend 25 mm.) or 2 cod. 0625 N (forend 22 mm.), cylinder screw, stainless steel fixing screws, assembling instructions. Catenaccio 3 punti di chiusura - Dead bolt 3 locking points CARATTERISTICHE COSTRUTTIVE: Scatola e coperchio in acciaio mandate zincato e plastificato - Frontale in acciaio inox - Catenaccio COD. EFAM throws autocentrante in acciaio nichelato con sistema antiscasso. FUNZIONAMENTO: Catenaccio comandato dalla chiave. 1461 25 25 40241 0,58 15 MANO: Unica. PARTI IN DOTAZIONE: 2 borchie cod. 0120 N, sottofrontale cod. 1461/F2225 22 40241 0,56 15 0623 N (frontale 25 mm.) oppure 2 cod. 0625 N (frontale 22 mm.), 30 25 45241 0,60 15 vite cilindro, viti di fissaggio in acciaio inox, istruzioni di montaggio. 1471 22 45241 0,58 15 CONSTRUCTIVE FEATURES: Zinc and plastic plated steel case and 1471/F2230 cover - Stainless steel forend - Nickel-plated steel self-centering 1481 35 25 50241 0,64 15 dead bolt with lock-picking system. 22 50241 0,62 15 1481/F2235 WORKING: Key driven dead bolt. HAND: No hand. PROVIDED WITH: 2 roses cod. 0120 N, forend spacer cod. 0623 N (forend 25 mm.) or 2 cod. 0625 N (forend 22 mm.), cylinder screw, stainless steel fixing screws, assembling instructions. 145 Serrature di sicurezza per montanti Vertical security locks Catenaccio e rullo regolabile 3 punti di chiusura - Dead and adjustable roller bolt 3 locking points CARATTERISTICHE COSTRUTTIVE: Scatola e coperchio in acciaio zincato e plastificato - Frontale in acciaio inox - Catenaccio mandate EFAM throws autocentrante in acciaio nichelato con sistema antiscasso - Rullo COD. in ottone nichelato. FUNZIONAMENTO: Catenaccio comandato dalla chiave - Rullo 1465 25 25 40241 0,65 15 comandato a pressione o dalla chiave. MANO: Unica. 1465/F2225 22 40241 0,63 15 PARTI IN DOTAZIONE: 2 borchie cod. 0120 N, sottofrontale cod. 30 25 45241 0,68 15 0623 N (frontale 25 mm.) oppure 2 cod. 0625 N (frontale 22 mm.), 1475 vite cilindro, viti di fissaggio in acciaio inox, istruzioni di montaggio. 22 45241 0,66 15 1475/F2230 CONSTRUCTIVE FEATURES: Zinc and plastic plated steel case and 1485 35 25 50241 0,71 15 cover - Stainless steel forend - Nickel-plated steel self-centering dead bolt with lock-picking system - Nickel-plated brass roller bolt. 1485/F2235 22 50241 0,69 15 WORKING: Key driven dead bolt - Pressure or key driven roller bolt. HAND: No hand. PROVIDED WITH: 2 roses cod. 0120 N, forend spacer cod. 0623 N (forend 25 mm.) or 2 cod. 0625 N (forend 22 mm.), cylinder screw, stainless steel fixing screws, assembling instructions. Gancio 3 punti di chiusura - Hook bolt 3 locking points CARATTERISTICHE COSTRUTTIVE: Scatola e coperchio in acciaio mandate zincato e plastificato - Frontale in acciaio inox - Gancio in acciaio COD. E F A throws nichelato. FUNZIONAMENTO: Gancio comandato dalla chiave. 1466 252540 10,561 5 MANO: Unica. PARTI IN DOTAZIONE: 2 borchie cod. 0120 N, sottofrontale cod. 1466/F22 252240 10,541 5 0623 N (frontale 25 mm.) oppure 2 cod. 0625 N (frontale 22 mm.), 302545 10,591 5 vite cilindro, viti di fissaggio in acciaio inox, istruzioni di montaggio. 1476 CONSTRUCTIVE FEATURES: Zinc and plastic plated steel case 1476/F22 302245 10,571 5 and cover - Stainless steel forend - Nickel-plated steel hook bolt. 1486 352550 10,621 5 WORKING: Key driven hook bolt. 1486/F22 352250 10,601 5 HAND: No hand. PROVIDED WITH: 2 roses cod. 0120 N, forend spacer cod. 0623 N (forend 25 mm.) or 2 cod. 0625 N (forend 22 mm.), cylinder screw, stainless steel fixing screws, assembling instructions. 146 Serrature di sicurezza per montanti Vertical security locks Alto e basso 2 punti di chiusura - Top and bottom 2 locking points CARATTERISTICHE COSTRUTTIVE: Scatola e coperchio in acciaio mandate zincato e plastificato - Frontale in acciaio inox. COD. E F A throws FUNZIONAMENTO: Aste verticali comandate dalla chiave. MANO: Unica. 1462 252540 10,531 5 PARTI IN DOTAZIONE: 2 borchie cod. 0120 N, sottofrontale cod. 0623 N (frontale 25 mm.) oppure 2 cod. 0625 N (frontale 22 mm.), 1462/F22 252240 10,511 5 vite cilindro, viti di fissaggio in acciaio inox, istruzioni di montaggio. 1472 302545 10,551 5 CONSTRUCTIVE FEATURES: Zinc and plastic plated steel case and 1472/F22 302245 10,531 5 cover - Stainless steel forend. WORKING: Key driven vertical rods. 352550 10,601 5 1482 HAND: No hand. PROVIDED WITH: 2 roses cod. 0120 N, forend spacer cod. 0623 N 1482/F22 352250 10,581 5 (forend 25 mm.) or 2 cod. 0625 N (forend 22 mm.), cylinder screw, stainless steel fixing screws, assembling instructions. Gancio con maniglia 3 punti di chiusura corsa da 25 mm - CARATTERISTICHE COSTRUTTIVE: Scatola e coperchio in acciaio zincato e plastificato - Frontale in acciaio inox - Gancio in acciaio COD. nichelato - Ingegno maniglia in acciaio nichelato foro mm.8 - 3 punti di chiusura realizzabili con kit cod. 0673 1473 FUNZIONAMENTO: Gancio comandato dalla maniglia - Blocco maniglia comandato dalla chiave. MANO: Unica. PARTI IN DOTAZIONE: 2 borchie cod. 0120 N, vite cilindro, viti di fissaggio in acciaio inox. Hook bolt with handle 3 locking points rod projection 25 mm E F A mandate throws 302547 10,801 - CONSTRUCTIVE FEATURES: Zinc and plastic plated steel case and cover - Stainless steel forend - Nickel-plated steel hook bolt Nickel-plated steel square spindle device mm.8 - 3 locking points version using cod. 0673 WORKING: Handle driven hook bolt - Key driven handle interlock. HAND: No hand. PROVIDED WITH: 2 roses cod. 0120 N, cylinder screw, stainless steel fixing screws. 147 Serrature di sicurezza per montanti Vertical security locks Catenaccio e scrocco regolabile - Dead and adjustable latch bolt Scrocco intercambiabile con rullo cod. 01435 - CARATTERISTICHE COSTRUTTIVE: Scatola e coperchio in acciaio zincato e plastificato - Frontale in acciaio inox - Catenaccio autocentrante in acciaio nichelato con sistema antiscasso Scrocco in lega speciale nichelata - Ingegno maniglia in lega speciale zincata foro mm.8 - Cilindro a spillo cod. 4052 o 4052/1 (con chiavi lunghe). FUNZIONAMENTO: Catenaccio comandato dalla chiave - Scrocco comandato dalla chiave o dalla maniglia. MANO: Reversibile. PARTI IN DOTAZIONE: 3 chiavi, 2 borchie cod. 0441 N, sottofrontale cod. 0623 N (frontale 25 mm.) oppure 2 cod. 0625 N (frontale 22 mm.), viti di fissaggio in acciaio inox, istruzioni di montaggio. Latch bolt interchangeable into roller bolt cod. 01435 COD. 4430 EF AM 4100 10,671 5 4430/F22 25224024 4100 10,651 5 4440 30254524 4100 10,721 5 4440/F22 30224524 4100 10,701 5 4100 10,741 5 4100 10,721 5 4101 - +0,02 Dead bolt CARATTERISTICHE COSTRUTTIVE: Scatola e coperchio in acciaio zincato e plastificato - Frontale in acciaio inox - Catenaccio COD. EF AM autocentrante in acciaio nichelato con sistema antiscasso Cilindro a spillo cod. 4052 o 4052/1 (con chiavi lunghe). 4431 25254024 4100 FUNZIONAMENTO: Catenaccio comandato dalla chiave. MANO: Unica. 4431/F22 25224024 4100 PARTI IN DOTAZIONE: 3 chiavi, 2 borchie cod. 0441 N, sottofrontale cod. 0623 N (frontale 25 mm.) oppure 2 cod. 0625 N (frontale 22 mm.), 4441 30254524 4100 viti di fissaggio in acciaio inox, istruzioni di montaggio. 4441/F22 30224524 CONSTRUCTIVE FEATURES: Zinc and plastic plated steel case and 35255024 4451 cover - Stainless steel forend - Nickel-plated steel self-centering dead bolt with lock-picking system - Cross cylinder cod.4052 or 4451/F22 35225024 4052/1 (with long keys). WORKING: Key driven dead bolt. HAND: No hand. PROVIDED WITH: 3 keys, 2 roses cod. 0441 N, forend spacer cod. 0623 N (forend 25 mm.) or 2 cod. 0625 N (forend 22 mm.), Chiavi lunghe - Long keys ----/1 stainless steel fixing screws, assembling instructions. 148 throws 25254024 35255024 CONSTRUCTIVE FEATURES: Zinc and plastic plated steel case and 4450 cover - Stainless steel forend - Nickel-plated steel self-centering dead bolt with lock-picking system - Special nickel-plated alloy 4450/F22 35225024 latch bolt - Special zinc-plated alloy square spindle device mm.8 - Cross cylinder cod. 4052 or 4052/1 (with long keys). WORKING: Key driven dead bolt - Handle or key driven latch bolt. HAND: Reversible. PROVIDED WITH: 3 keys, 2 roses cod. 0441 N, forend spacer cod. 0623 N (forend 25 mm.) or 2 cod. 0625 N (forend 22 mm.), ----/1 Chiavi lunghe - Long keys stainless steel fixing screws, assembling instructions. Catenaccio - mandate mandate throws 10,601 5 10,581 5 10,641 5 4100 10,621 5 4100 10,661 5 4100 10,641 5 4101 - +0,02 Serrature di sicurezza per montanti Vertical security locks Catenaccio e rullo regolabile - Dead and adjustable roller bolt CARATTERISTICHE COSTRUTTIVE: Scatola e coperchio in acciaio zincato e plastificato - Frontale in acciaio inox - Catenaccio autocentrante in acciaio nichelato con sistema antiscasso - Rullo in ottone nichelato - Cilindro a spillo cod. 4052 o 4052/1 (con chiavi lunghe). FUNZIONAMENTO: Catenaccio comandato dalla chiave - Rullo comandato a pressione o dalla chiave. MANO: Unica. PARTI IN DOTAZIONE: 3 chiavi, 2 borchie cod. 0441 N, sottofrontale cod. 0623 N (frontale 25 mm.) oppure 2 cod. 0625 N (frontale 22 mm.), viti di fissaggio in acciaio inox, istruzioni di montaggio. COD. 4435 EF AM throws 25254024 4100 10,671 5 4435/F22 25224024 4100 10,651 5 4445 30254524 4100 10,721 5 4445/F22 30224524 4100 10,701 5 4100 10,741 5 4100 10,721 5 4101 - +0,02 35255024 CONSTRUCTIVE FEATURES: Zinc and plastic plated steel case and 4455 cover - Stainless steel forend - Nickel-plated steel self-centering dead bolt with lock-picking system - Nickel-plated brass roller bolt 4455/F22 35225024 - Cross cylinder cod.4052 or 4052/1 (with long keys). WORKING: Key driven dead bolt - Pressure or key driven roller bolt. HAND: No hand. PROVIDED WITH: 3 keys, 2 roses cod. 0441 N, forend spacer cod. 0623 N (forend 25 mm.) or 2 cod. 0625 N (forend 22 mm.), ---- /1 Chiavi lunghe - Long keys stainless steel fixing screws, assembling instructions. Gancio - mandate Hook bolt CARATTERISTICHE COSTRUTTIVE: Scatola e coperchio in acciaio zincato e plastificato - Frontale in acciaio inox - Gancio in acciaio COD. EFA nichelato - Cilindro a spillo cod. 4052 o 4052/1 (con chiavi lunghe). FUNZIONAMENTO: Gancio comandato dalla chiave. 4436 252540 4100 MANO: Unica. PARTI IN DOTAZIONE: 3 chiavi, 2 borchie cod. 0441 N, sottofrontale 4436/F22 252240 4100 cod. 0623 N (frontale 25 mm.) oppure 2 cod. 0625 N (frontale 22 4446 302545 4100 mm.), viti di fissaggio in acciaio inox, istruzioni di montaggio. CONSTRUCTIVE FEATURES: Zinc and plastic plated steel case 4446/F22 302245 and cover - Stainless steel forend - Nickel-plated steel hook bolt - 4456 352550 Cross cylinder cod.4052 or 4052/1 (with long keys). 4456/F22 352250 WORKING: Key driven hook bolt. HAND: No hand. PROVIDED WITH: 3 keys, 2 roses cod. 0441 N, forend spacer cod. 0623 N (forend 25 mm.) or 2 cod. 0625 N (forend 22 mm.), stainless steel fixing screws, assembling instructions. Chiavi lunghe - Long keys ----/1 mandate throws 10,591 5 10,571 5 10,611 5 4100 10,591 5 4100 10,641 5 4100 10,621 5 4101 - +0,02 149 Serrature di sicurezza per montanti Vertical security locks Catenaccio e scrocco regolabile 3 punti di chiusura Scrocco intercambiabile con rullo cod. 01435 - CARATTERISTICHE COSTRUTTIVE: Scatola e coperchio in acciaio zincato e plastificato - Frontale in acciaio inox - Catenaccio autocentrante in acciaio nichelato con sistema antiscasso Scrocco in lega speciale nichelata - Ingegno maniglia in lega speciale zincata foro mm.8 - Cilindro a spillo cod. 4052 o 4052/1 (con chiavi lunghe). FUNZIONAMENTO: Catenaccio comandato dalla chiave - Scrocco comandato dalla chiave o dalla maniglia. MANO: Reversibile. PARTI IN DOTAZIONE: 3 chiavi, 2 borchie cod. 0441 N, sottofrontale cod. 0623 N (frontale 25 mm.) oppure 2 cod. 0625 N (frontale 22 mm.), viti di fissaggio in acciaio inox, istruzioni di montaggio. Dead and adjustable latch bolt 3 locking points Latch bolt interchangeable into roller bolt cod. 01435 COD. 4460 EF AM 4100 10,731 5 4460/F22 25224024 4100 10,711 5 4470 30254524 4100 10,761 5 4470/F22 30224524 4100 10,741 5 4100 10,791 5 4100 10,771 5 4101 - +0,02 Dead bolt 3 locking points CARATTERISTICHE COSTRUTTIVE: Scatola e coperchio in acciaio zincato e plastificato - Frontale in acciaio inox - Catenaccio COD. EF AM autocentrante in acciaio nichelato con sistema antiscasso Cilindro a spillo cod. 4052 o 4052/1 (con chiavi lunghe). 4461 25254024 4100 FUNZIONAMENTO: Catenaccio comandato dalla chiave. MANO: Unica. 4461/F22 25224024 4100 PARTI IN DOTAZIONE: 3 chiavi, 2 borchie cod. 0441 N, sottofrontale cod. 0623 N (frontale 25 mm.) oppure 2 cod. 0625 N (frontale 22 mm.), 4471 30254524 4100 viti di fissaggio in acciaio inox, istruzioni di montaggio. 4471/F22 30224524 CONSTRUCTIVE FEATURES: Zinc and plastic plated steel case and 35255024 4481 cover - Stainless steel forend - Nickel-plated steel self-centering dead bolt with lock-picking system - Cross cylinder cod.4052 or 4481/F22 35225024 4052/1 (with long keys). WORKING: Key driven dead bolt. HAND: No hand. PROVIDED WITH: 3 keys, 2 roses cod. 0441 N, forend spacer cod. 0623 N (forend 25 mm.) or 2 cod. 0625 N (forend 22 mm.), Chiavi lunghe - Long keys ----/1 stainless steel fixing screws, assembling instructions. 150 throws 25254024 35255024 CONSTRUCTIVE FEATURES: Zinc and plastic plated steel case and 4480 cover - Stainless steel forend - Nickel-plated steel self-centering dead bolt with lock-picking system - Special nickel-plated alloy 4480/F22 35225024 latch bolt - Special zinc-plated alloy square spindle device mm.8 - Cross cylinder cod.4052 or 4052/1 (with long keys). WORKING: Key driven dead bolt - Handle or key driven latch bolt. HAND: Reversible. PROVIDED WITH: 3 keys, 2 roses cod. 0441 N, forend spacer cod. 0623 N (forend 25 mm.) or 2 cod. 0625 N (forend 22 mm.), ----/1 Chiavi lunghe - Long keys stainless steel fixing screws, assembling instructions. Catenaccio 3 punti di chiusura - mandate mandate throws 10,681 5 10,661 5 10,701 5 4100 10,681 5 4100 10,731 5 4100 10,711 5 4101 - +0,02 Serrature di sicurezza per montanti Vertical security locks Catenaccio e rullo regolabile 3 punti di chiusura - CARATTERISTICHE COSTRUTTIVE: Scatola e coperchio in acciaio zincato e plastificato - Frontale in acciaio inox - Catenaccio autocentrante in acciaio nichelato con sistema antiscasso - Rullo in ottone nichelato - Cilindro a spillo cod. 4052 o 4052/1 (con chiavi lunghe). FUNZIONAMENTO: Catenaccio comandato dalla chiave - Rullo comandato a pressione o dalla chiave. MANO: Unica. PARTI IN DOTAZIONE: 3 chiavi, 2 borchie cod. 0441 N, sottofrontale cod. 0623 N (frontale 25 mm.) oppure 2 cod. 0625 N (frontale 22 mm.), viti di fissaggio in acciaio inox, istruzioni di montaggio. COD. 4465 Dead and adjustable roller bolt 3 locking points EF AM throws 25254024 4100 10,731 5 4465/F22 25224024 4100 10,711 5 4475 30254524 4100 10,761 5 4475/F22 30224524 4100 10,741 5 4100 10,791 5 4100 10,771 5 4101 - +0,02 CONSTRUCTIVE FEATURES: Zinc and plastic plated steel case and 4485 35255024 cover - Stainless steel forend - Nickel-plated steel self-centering dead bolt with lock-picking system - Nickel-plated brass roller bolt 4485/F22 35225024 - Cross cylinder cod.4052 or 4052/1 (with long keys). WORKING: Key driven dead bolt - Pressure or key driven roller bolt. HAND: No hand. PROVIDED WITH: 3 keys, 2 roses cod. 0441 N, forend spacer cod. 0623 N (forend 25 mm.) or 2 cod. 0625 N (forend 22 mm.), Chiavi lunghe - Long keys stainless steel fixing screws, assembling instructions. ----/1 Gancio 3 punti di chiusura - mandate Hook bolt 3 locking points CARATTERISTICHE COSTRUTTIVE: Scatola e coperchio in acciaio zincato e plastificato - Frontale in acciaio inox - Gancio in acciaio COD. EFA nichelato - Cilindro a spillo cod. 4052 o 4052/1 (con chiavi lunghe). FUNZIONAMENTO: Gancio comandato dalla chiave. 4466 252540 4100 MANO: Unica. PARTI IN DOTAZIONE: 3 chiavi, 2 borchie cod. 0441 N, sottofrontale 4466/F22 252240 4100 cod. 0623 N (frontale 25 mm.) oppure 2 cod. 0625 N (frontale 22 mm.), viti di fissaggio in acciaio inox, istruzioni di montaggio. 4476 302545 4100 CONSTRUCTIVE FEATURES: Zinc and plastic plated steel case 4476/F22 302245 and cover - Stainless steel forend - Nickel-plated steel hook bolt 352550 4486 Cross cylinder cod.4052 or 4052/1 (with long keys). WORKING: Key driven hook bolt. 4486/F22 352250 HAND: No hand. PROVIDED WITH: 3 keys, 2 roses cod. 0441 N, forend spacer cod. 0623 N (forend 25 mm.) or 2 cod. 0625 N (forend 22 mm.), stainless steel fixing screws, assembling instructions. Chiavi lunghe - Long keys ----/1 mandate throws 10,661 5 10,641 5 10,681 5 4100 10,661 5 4100 10,711 5 4100 10,691 5 4101 - +0,02 151 Serrature di sicurezza per montanti Vertical security locks Alto e basso 2 punti di chiusura - Top and bottom 2 locking points CARATTERISTICHE COSTRUTTIVE: Scatola e coperchio in acciaio zincato e plastificato - Frontale in acciaio inox - Cilindro a spillo COD. EFA cod. 4052 o 4052/1 (con chiavi lunghe). FUNZIONAMENTO: Aste verticali comandate dalla chiave. 4462 252540 4100 MANO: Unica. PARTI IN DOTAZIONE: 3 chiavi, 2 borchie cod. 0441 N, sottofrontale 4462/F22 252240 4100 cod. 0623 N (frontale 25 mm.) oppure 2 cod. 0625 N (frontale 22 4472 302545 4100 mm.), viti di fissaggio in acciaio inox, istruzioni di montaggio. CONSTRUCTIVE FEATURES: Zinc and plastic plated steel case and 4472/F22 302245 cover - Stainless steel forend - Cross cylinder cod.4052 or 4052/1 4482 352550 (with long keys). 4482/F22 352250 WORKING: Key driven vertical rods. HAND: No hand. PROVIDED WITH: 3 keys, 2 roses cod. 0441 N, forend spacer cod. 0623 N (forend 25 mm.) or 2 cod. 0625 N (forend 22 mm.), stainless steel fixing screws, assembling instructions. Chiavi lunghe - Long keys ----/1 Gancio con maniglia 3 punti di chiusura corsa da 25 mm - CARATTERISTICHE COSTRUTTIVE: Scatola e coperchio in acciaio zincato e plastificato - Frontale in acciaio inox - Gancio in COD. acciaio nichelato - Ingegno maniglia in acciaio nichelato foro mm.8 - Cilindro a spillo cod. 4072 o 4072/1 (con chiavi lunghe). 4473 - 3 punti di chiusura realizzabili con kit cod. 0673 FUNZIONAMENTO: Gancio comandato dalla maniglia - Blocco maniglia comandato dalla chiave. MANO: Unica. PARTI IN DOTAZIONE: 3 chiavi, 2 borchie cod. 0441 N, viti di fissaggio in acciaio inox. throws 10,611 5 10,591 5 10,651 5 4100 10,631 5 4100 10,681 5 4100 10,661 5 4101 - +0,02 Hook bolt with handle 3 locking points rod projection 25 mm EFA 302547 CONSTRUCTIVE FEATURES: Zinc and plastic plated steel case and cover - Stainless steel forend - Nickel-plated steel hook bolt - Nickel plated steel square spindle device mm.8 - Cross cylinder cod.4072 or 4072/1 (with long keys) - 3 locking points version using cod. 0673 WORKING: Handle driven hook bolt - Key driven handle interlock. HAND: No hand. Chiavi lunghe - Long keys PROVIDED WITH: 3 keys, 2 roses cod. 0441 N, stainless steel ----/1 fixing screws. 152 mandate mandate throws 4100 10,881 - 4101 - +0,02 Elettroserrature di sicurezza per montanti Vertical security electric locks Catenaccio, scrocco regolabile e pistone regolabile Dead bolt, adjustable latch bolt and adjustable piston CARATTERISTICHE COSTRUTTIVE: Scatola e coperchio in acciaio zincato e plastificato - Frontale in acciaio inox - Catenaccio autocentrante in acciaio nichelato con sistema antiscasso - Scrocco in lega speciale nichelata - Pistone di ricarica in acciaio nichelato Ingegno maniglia in lega speciale zincata foro mm.8 - Bobina cod. 037 (12V-10Wa.c./d.c.) CE. FUNZIONAMENTO: Catenaccio comandato dalla chiave - Scrocco comandato dalla chiave, dalla maniglia o dal comando elettrico a distanza - Il funzionamento è garantito anche in mancanza di corrente. MANO: Reversibile. PARTI IN DOTAZIONE: 2 borchie cod. 0120 N, sottofrontale cod. 0623 N (frontale mm.25) oppure 2 cod. 0625 N (frontale mm.22), vite cilindro, viti di fissaggio in acciaio inox, istruzioni di montaggio. CONSTRUCTIVE FEATURES: Zinc and plastic plated steel case and cover - Stainless steel forend - Nickel-plated steel self-centering dead bolt with lock-picking system - Special nickel-plated alloy latch bolt - Nickel-plated steel piston - Special zinc-plated alloy square spindle device mm.8 - Coil set cod. 037 (12V-10W a.c./d.c.) CE. WORKING: Key driven dead bolt - Key, handle or remote control driven latch bolt Working is assured also without current. HAND: Reversible. PROVIDED WITH: 2 roses cod. 0120 N, forend spacer cod. 0623 N (forend 25 mm.) or 2 cod. 0625 N (forend 22 mm.), cylinder screw, stainless steel fixing screws, assembling instructions. COD. Catenaccio e scrocco - EFAM throws 1437 25 25 40241 0,70 1- 1437/F22 25 22 40241 0,68 1- 1447 30 25 45241 0,74 1- 1447/F22 30 22 45241 0,72 1- 1457 35 25 50241 0,78 1- 1457/F22 35 22 50241 0,76 1- Dead and latch bolt CARATTERISTICHE COSTRUTTIVE: Scatola e coperchio in acciaio zincato e plastificato - Frontale in acciaio inox - Catenaccio autocentrante in acciaio nichelato con sistema antiscasso - Scrocco in ottone nichelato - Pistone di ricarica in acciaio nichelato - Bobina cod. 038 (12V-10W a.c./d.c.) CE. FUNZIONAMENTO: Catenaccio comandato dalla chiave - Scrocco comandato dalla chiave, dal comando elettrico a distanza o dal pulsante meccanico cod. 058 - Il funzionamento è garantito anche in mancanza di corrente. FERMO A GIORNO: Con il pulsante meccanico cod. 059 è consentito il bloccaggio dell’elettroserratura in posizione di “aperto”. MANO: Reversibile. PARTI IN DOTAZIONE: 2 borchie cod. 0120 N, sottofrontale cod. 0623 N (frontale mm.25) oppure 2 cod. 0625 N (frontale mm.22), vite cilindro, viti di fissaggio in acciaio inox, istruzioni di montaggio. CONSTRUCTIVE FEATURES: Zinc and plastic plated steel case and cover - Stainless steel forend - Nickel-plated steel self-centering dead bolt with lock-picking system - Nickel-plated brass latch bolt - Nickel-plated steel piston - Coil set cod. 038 (12V-10W a.c./d.c.) CE. WORKING: Key driven dead bolt - Key, remote control or push-button cod. 058 driven latch bolt - Working is assured also without current. HOLD OPEN DEVICE: With push-button cod. 059, it is possible to block the electric lock in its “open” position. HAND: Reversible. PROVIDED WITH: 2 roses cod. 0120 N, forend spacer cod. 0623 N (forend 25 mm.) or 2 cod. 0625 N (forend 22 mm.), cylinder screw, stainless steel fixing screws, assembling instructions. COD. 1438 EFAM mandate throws 25 25 40241 0,61 15 1438/F2225 22 40241 0,59 15 1448 30 25 45241 0,64 15 22 45241 0,62 15 1448/F2230 1458 35 25 50241 0,68 15 1458/F2235 22 50241 0,66 15 153 Elettroserrature di sicurezza per montanti Vertical security electric locks Scrocco - Latch bolt CARATTERISTICHE COSTRUTTIVE: Scatola e coperchio in acciaio zincato e plastificato - Frontale in acciaio inox - Scrocco in ottone nichelato - Pistone di ricarica in acciaio nichelato - Bobina cod. 038 (12V-10W a.c./d.c.) CE. FUNZIONAMENTO: Scrocco comandato dalla chiave, dal comando elettrico a distanza o dal pulsante meccanico cod. 058 - Il funzionamento è garantito anche in mancanza di corrente. FERMO A GIORNO: Con il pulsante meccanico cod. 059 è consentito il bloccaggio dell’elettroserratura in posizione di “aperto”. MANO: Reversibile. PARTI IN DOTAZIONE: 2 borchie cod. 0120 N, sottofrontale cod. 0623 N (frontale mm.25) oppure 2 cod. 0625 N (frontale mm.22), vite cilindro, viti di fissaggio in acciaio inox, istruzioni di montaggio. CONSTRUCTIVE FEATURES: Zinc and plastic plated steel case and cover - Stainless steel forend - Nickel-plated brass latch bolt - Nickel-plated steel piston - Coil set cod. 038 (12V-10W a.c./d.c.) CE. WORKING: Key, remote control or push-button cod. 058 driven latch bolt - Working is assured also without current. HOLD OPEN DEVICE: With push-button cod. 059, it is possible to block the electric lock in its “open” position. HAND: Reversible. PROVIDED WITH: 2 roses cod. 0120 N, forend spacer cod. 0623 N (forend 25 mm.) or 2 cod. 0625 N (forend 22 mm.), cylinder screw, stainless steel fixing screws, assembling instructions. COD. E F A 1439 mandate throws 252540 10,611 5 1439/F22 252240 10,591 5 1449 302545 10,641 5 1449/F22 302245 10,621 5 1459 352550 10,681 5 1459/F22 352250 10,661 5 Scrocco regolabile, pistone regolabile e quadro maniglia Adjustable latch bolt, adjustable piston and square spindle CARATTERISTICHE COSTRUTTIVE: Scatola e coperchio in acciaio zincato e plastificato - Frontale in acciaio inox - Scrocco in in lega speciale nichelata - Pistone di ricarica in acciaio nichelato - Ingegno maniglia in lega speciale zincata foro mm.8 - Bobina cod. 037 (12V-10W a.c./d.c.) CE. FUNZIONAMENTO: Scrocco comandato dalla chiave, dalla maniglia o dal comando elettrico a distanza - Il funzionamento è garantito anche in mancanza di corrente. MANO: Reversibile. PARTI IN DOTAZIONE: 2 borchie cod. 0120 N, sottofrontale cod. 0623 N (frontale mm.25) oppure 2 cod. 0625 N (frontale mm.22), vite cilindro, viti di fissaggio in acciaio inox, istruzioni di montaggio. CONSTRUCTIVE FEATURES: Zinc and plastic plated steel case and cover - Stainless steel forend - Special nickel-plated alloy latch bolt - Nickel-plated steel piston - Special zinc-plated alloy square spindle device mm.8 - Coil set cod. 037 (12V-10W a.c./d.c.) CE. WORKING: Key, handle or remote control driven latch bolt - Working is assured also without current. HAND: Reversible. PROVIDED WITH: 2 roses cod. 0120 N, forend spacer cod. 0623 N (forend 25 mm.) or 2 cod. 0625 N (forend 22 mm.), cylinder screw, stainless steel fixing screws, assembling instructions. COD. E F A 14379 mandate throws 252540 10,701 - 14379/F22252240 10,681 - 14479 302545 10,741 - 14479/F22302245 10,721 - 14579 352550 10,781 - 14579/F22352250 10,761 - 154 Elettroserrature di sicurezza per montanti Vertical security electric locks Catenaccio, scrocco regolabile, pistone regolabile 3 punti di chiusura Dead bolt, adjustable latch bolt and adjustable piston 3 locking points CARATTERISTICHE COSTRUTTIVE: Scatola e coperchio in acciaio zincato e plastificato - Frontale in acciaio inox - Catenaccio autocentrante in acciaio nichelato con sistema antiscasso - Scrocco in lega speciale nichelata - Pistone di ricarica in acciaio nichelato Ingegno maniglia in lega speciale zincata foro mm.8 - Bobina cod. 037 (12V-10W a.c./d.c.) CE. FUNZIONAMENTO: Catenaccio comandato dalla chiave - Scrocco comandato dalla chiave, dalla maniglia o dal comando elettrico a distanza - Il funzionamento è garantito anche in mancanza di corrente. MANO: Reversibile. PARTI IN DOTAZIONE: 2 borchie cod. 0120 N, sottofrontale cod. 0623 N (frontale mm.25) oppure 2 cod. 0625 N (frontale mm.22), vite cilindro, viti di fissaggio in acciaio inox, istruzioni di montaggio. CONSTRUCTIVE FEATURES: Zinc and plastic plated steel case and cover - Stainless steel forend - Nickel-plated steel self-centering dead bolt with lock-picking system - Special nickel-plated alloy latch bolt - Nickel-plated steel piston - Special zinc-plated alloy square spindle device mm.8 - Coil set cod. 037 (12V-10W a.c./d.c.) CE. WORKING: Key driven dead bolt - Key, handle or remote control driven latch bolt Working is assured also without current. HAND: Reversible. PROVIDED WITH: 2 roses cod. 0120 N, forend spacer cod. 0623 N (forend 25 mm.) or 2 cod. 0625 N (forend 22 mm.), cylinder screw, stainless steel fixing screws, assembling instructions. COD. EFAM mandate throws 1467 25 25 40241 0,74 1- 1467/F22 25 22 40241 0,72 1- 1477 30 25 45241 0,78 1- 1477/F22 30 22 45241 0,76 1- 1487 35 25 50241 0,82 1- 1487/F22 35 22 50241 0,80 1- Catenaccio e scrocco 3 punti di chiusura - Dead and latch bolt 3 locking points CARATTERISTICHE COSTRUTTIVE: Scatola e coperchio in acciaio zincato e plastificato - Frontale in acciaio inox - Catenaccio autocentrante in acciaio nichelato con sistema antiscasso - Scrocco in ottone nichelato - Pistone di ricarica in acciaio nichelato - Bobina cod. 038 (12V-10W a.c./d.c.) CE. FUNZIONAMENTO: Catenaccio comandato dalla chiave - Scrocco comandato dalla chiave, dal comando elettrico a distanza o dal pulsante meccanico cod. 058 - Il funzionamento è garantito anche in mancanza di corrente. FERMO A GIORNO: Con il pulsante meccanico cod. 059 è consentito il bloccaggio dell’elettroserratura in posizione di “aperto”. MANO: Reversibile. PARTI IN DOTAZIONE: 2 borchie cod. 0120 N, sottofrontale cod. 0623 N (frontale mm.25) oppure 2 cod. 0625 N (frontale mm.22), vite cilindro, viti di fissaggio in acciaio inox, istruzioni di montaggio. CONSTRUCTIVE FEATURES: Zinc and plastic plated steel case and cover - Stainless steel forend - Nickel-plated steel self-centering dead bolt with lock-picking system - Nickel-plated brass latch bolt - Nickel-plated steel piston - Coil set cod. 038 (12V-10W a.c./d.c.) CE. WORKING: Key driven dead bolt - Key, remote control or push-button cod. 058 driven latch bolt - Working is assured also without current. HOLD OPEN DEVICE: With push-button cod. 059, it is possible to block the electric lock in its “open” position. HAND: Reversible. PROVIDED WITH: 2 roses cod. 0120 N, forend spacer cod. 0623 N (forend 25 mm.) or 2 cod. 0625 N (forend 22 mm.), cylinder screw, stainless steel fixing screws, assembling instructions. COD. 1468 EFAM mandate throws 25 25 40241 0,65 15 1468/F2225 22 40241 0,63 15 1478 30 25 45241 0,68 15 22 45241 0,66 15 1478/F2230 1488 35 25 50241 0,73 15 22 50241 0,71 15 1488/F2235 155 Elettroserrature di sicurezza per montanti Vertical security electric locks Catenaccio, scrocco regolabile e pistone regolabile Dead bolt, adjustable latch bolt and adjustable piston CARATTERISTICHE COSTRUTTIVE: Scatola e coperchio in acciaio zincato e plastificato Frontale in acciaio inox - Catenaccio autocentrante in acciaio nichelato con sistema antiscasso - Scrocco in lega speciale nichelata - Pistone di ricarica in acciaio nichelato - Ingegno maniglia in lega speciale zincata foro mm.8 - Bobina cod. 037 (12V-10W a.c./d.c.) CE - Cilindro a spillo cod. 4052 o 4052/1 (con chiavi lunghe). FUNZIONAMENTO: Catenaccio comandato dalla chiave - Scrocco comandato dalla chiave, dalla maniglia o dal comando elettrico a distanza - Il funzionamento è garantito anche in mancanza di corrente. MANO: Reversibile. PARTI IN DOTAZIONE: 3 chiavi, 2 borchie cod. 0441 N, sottofrontale cod. 0623 N (frontale mm.25) oppure 2 cod. 0625 N (frontale mm.22), viti di fissaggio in acciaio inox, istruzioni di montaggio. CONSTRUCTIVE FEATURES: Zinc and plastic plated steel case and cover - Stainless steel forend - Nickel-plated steel self-centering dead bolt with lock-picking system - Special nickel-plated alloy latch bolt - Nickel-plated steel piston - Special zinc-plated alloy square spindle device mm.8 - Coil set cod. 037 (12V-10W a.c./d.c.) CE - Cross cylinder cod. 4052 or 4052/1 (with long keys). WORKING: Key driven dead bolt - Key, handle or remote control driven latch bolt Working is assured also without current. HAND: Reversible. PROVIDED WITH: 3 keys, 2 roses cod. 0441 N, forend spacer cod. 0623 N (forend 25 mm.) or 2 cod. 0625 N (forend 22 mm.), stainless steel fixing screws, assembling instructions. COD. Catenaccio e scrocco - mandate E F A M 4437 25 25 40 24 4100 1 0,79 1 - 4437/F22 25 22 40 24 4100 1 0,77 1 - 4447 30 25 45 24 4100 1 0,83 1 - 4447/F22 30 22 45 24 4100 1 0,81 1 - 4457 35 25 50 24 4100 1 0,87 1 - 4457/F22 35 22 50 24 4100 1 0,85 1 - Chiavi lunghe - Long keys ----/1 4101 - +0,02 throws Dead and latch bolt CARATTERISTICHE COSTRUTTIVE: Scatola e coperchio in acciaio zincato e plastificato - Frontale in acciaio inox - Catenaccio autocentrante in acciaio nichelato con sistema antiscasso - Scrocco in ottone nichelato - Pistone di ricarica in acciaio nichelato - Bobina cod. 038 (12V-10W a.c./d.c.) CE - Cilindro a spillo cod. 4052 o 4052/1 (con chiavi lunghe). FUNZIONAMENTO: Catenaccio comandato dalla chiave - Scrocco comandato dalla chiave, dal comando elettrico a distanza o dal pulsante meccanico cod. 058 - Il funzionamento è garantito anche in mancanza di corrente. FERMO A GIORNO: Con il pulsante meccanico cod. 059 è consentito il bloccaggio dell’elettroserratura in posizione di “aperto”. MANO: Reversibile. PARTI IN DOTAZIONE: 3 chiavi, 2 borchie cod. 0441 N, sottofrontale cod. 0623 N (frontale mm.25) oppure 2 cod. 0625 N (frontale mm.22), viti di fissaggio in acciaio inox, istruzioni di montaggio. CONSTRUCTIVE FEATURES: Zinc and plastic plated steel case and cover - Stainless steel forend - Nickel-plated steel self-centering dead bolt with lock-picking system - Nickel-plated brass latch bolt - Nickel-plated steel piston - Coil set cod. 038 (12V-10W a.c./d.c.) CE - Cross cylinder cod.4052 or 4052/1 (with long keys). WORKING: Key driven dead bolt - Key, remote control or push-button cod. 058 driven latch bolt - Working is assured also without current. HOLD OPEN DEVICE: With push-button cod. 059, it is possible to block the electric lock in its “open” position. HAND: Reversible. PROVIDED WITH: 3 keys, 2 roses cod. 0441 N, forend spacer cod. 0623 N (forend 25 mm.) or 2 cod. 0625 N (forend 22 mm.), stainless steel fixing screws, assembling instructions. COD. 4438 mandate throws 25254024 4100 10,701 5 4438/F22 25224024 4100 10,681 5 4448 30254524 4100 10,731 5 4448/F22 30224524 4100 10,711 5 35255024 4100 10,771 5 4458/F22 35225024 4100 10,751 5 Chiavi lunghe - Long keys ----/1 4101 - +0,02 4458 156 EF AM Elettroserrature di sicurezza per montanti Vertical security electric locks Scrocco - Latch bolt CARATTERISTICHE COSTRUTTIVE: Scatola e coperchio in acciaio zincato e plastificato - Frontale in acciaio inox - Scrocco in ottone nichelato - Pistone di ricarica in acciaio nichelato - Bobina cod. 038 (12V-10W a.c./d.c.) CE - Cilindro a spillo cod. 4052 o 4052/1 (con chiavi lunghe). FUNZIONAMENTO: Scrocco comandato dalla chiave, dal comando elettrico a distanza o dal pulsante meccanico cod. 058 - Il funzionamento è garantito anche in mancanza di corrente. FERMO A GIORNO: Con il pulsante meccanico cod. 059 è consentito il bloccaggio dell’elettroserratura in posizione di “aperto”. MANO: Reversibile. PARTI IN DOTAZIONE: 3 chiavi, 2 borchie cod. 0441 N, sottofrontale cod. 0623 N (frontale mm.25) oppure 2 cod. 0625 N (frontale mm.22), viti di fissaggio in acciaio inox, istruzioni di montaggio. CONSTRUCTIVE FEATURES: Zinc and plastic plated steel case and cover - Stainless steel forend - Nickel-plated brass latch bolt - Nickel-plated steel piston - Coil set cod. 038 (12V10W a.c./d.c.) CE - Cross cylinder cod.4052 or 4052/1 (with long keys). WORKING: Key, remote control or push-button cod. 058 driven latch bolt - Working is assured also without current. HOLD OPEN DEVICE: With push-button cod. 059, it is possible to block the electric lock in its “open” position. HAND: Reversible. PROVIDED WITH: 3 keys, 2 roses cod. 0441 N, forend spacer cod. 0623 N (forend 25 mm.) or 2 cod. 0625 N (forend 22 mm.), stainless steel fixing screws, assembling instructions. COD. 4439 EFA mandate throws 252540 4100 10,701 5 4439/F22 252240 4100 10,681 5 4449 302545 4100 10,731 5 4449/F22 302245 4100 10,711 5 352550 4100 10,771 5 4459/F22 352250 4100 10,751 5 Chiavi lunghe - Long keys ----/1 4101 - +0,02 4459 Scrocco regolabile, pistone regolabile e quadro maniglia Adjustable latch bolt, adjustable piston and square spindle CARATTERISTICHE COSTRUTTIVE: Scatola e coperchio in acciaio zincato e plastificato Frontale in acciaio inox - Scrocco in lega speciale nichelata - Pistone di ricarica in acciaio nichelato - Ingegno maniglia in lega speciale zincata foro mm.8 - Bobina cod. 037 (12V10W a.c./d.c.) CE - Cilindro a spillo cod. 4052 o 4052/1 (con chiavi lunghe). FUNZIONAMENTO: Scrocco comandato dalla chiave, dalla maniglia o dal comando elettrico a distanza - Il funzionamento è garantito anche in mancanza di corrente. MANO: Reversibile. PARTI IN DOTAZIONE: 3 chiavi, 2 borchie cod. 0441 N, sottofrontale cod. 0623 N (frontale mm.25) oppure 2 cod. 0625 N (frontale mm.22), viti di fissaggio in acciaio inox, istruzioni di montaggio. CONSTRUCTIVE FEATURES: Zinc and plastic plated steel case and cover - Stainless steel forend - Special nickel-plated alloy latch bolt - Nickel-plated steel piston - Special zinc-plated alloy square spindle device mm.8 - Coil set cod. 037 (12V-10W a.c./d.c.) CE - Cross cylinder cod. 4052 or 4052/1 (with long keys). WORKING: Key, handle or remote control driven latch bolt - Working is assured also without current. HAND: Reversible. PROVIDED WITH: 3 keys, 2 roses cod. 0441 N, forend spacer cod. 0623 N (forend 25 mm.) or 2 cod. 0625 N (forend 22 mm.), stainless steel fixing screws, assembling instructions. COD. 44379 mandate EFA throws 252540 4100 10,791 - 44379/F22252240 4100 10,771 - 44479 302545 4100 10,831 - 44479/F22302245 4100 10,811 - 352550 4100 10,871 - 44579/F22352250 4100 10,851 - Chiavi lunghe - Long keys ----/1 4101 - +0,02 44579 157 Elettroserrature di sicurezza per montanti Vertical security electric locks Catenaccio, scrocco regolabile e pistone regolabile 3 punti di chiusura Dead bolt, adjustable latch bolt and adjustable piston 3 locking points CARATTERISTICHE COSTRUTTIVE: Scatola e coperchio in acciaio zincato e plastificato Frontale in acciaio inox - Catenaccio autocentrante in acciaio nichelato con sistema antiscasso - Scrocco in lega speciale nichelata - Pistone di ricarica in acciaio nichelato - Ingegno maniglia in lega speciale zincata foro mm.8 - Bobina cod. 037 (12V-10W a.c./d.c.) CE - Cilindro a spillo cod. 4052 o 4052/1 (con chiavi lunghe). FUNZIONAMENTO: Catenaccio comandato dalla chiave - Scrocco comandato dalla chiave, dalla maniglia o dal comando elettrico a distanza - Il funzionamento è garantito anche in mancanza di corrente. MANO: Reversibile. PARTI IN DOTAZIONE: 3 chiavi, 2 borchie cod. 0441 N, sottofrontale cod. 0623 N (frontale mm.25) oppure 2 cod. 0625 N (frontale mm.22), viti di fissaggio in acciaio inox, istruzioni di montaggio. CONSTRUCTIVE FEATURES: Zinc and plastic plated steel case and cover - Stainless steel forend - Nickel-plated steel self-centering dead bolt with lock-picking system - Special nickel-plated alloy latch bolt - Nickel-plated steel piston - Special zinc-plated alloy square spindle device mm.8 - Coil set cod. 037 (12V-10W a.c./d.c.) CE - Cross cylinder cod. 4052 or 4052/1 (with long keys). WORKING: Key driven dead bolt - Key, handle or remote control driven latch bolt Working is assured also without current. HAND: Reversible. PROVIDED WITH: 3 keys, 2 roses cod. 0441 N, forend spacer cod. 0623 N (forend 25 mm.) or 2 cod. 0625 N (forend 22 mm.), stainless steel fixing screws, assembling instructions. COD. 4467 EF AM mandate throws 25254024 4100 10,831 - 4467/F22 25224024 4100 10,811 - 4477 30254524 4100 10,871 - 4477/F22 30224524 4100 10,851 - 35255024 4100 10,921 - 4487/F22 35225024 4100 10,901 - Chiavi lunghe - Long keys ----/1 4101 - +0,02 4487 Catenaccio e scrocco 3 punti di chiusura - Dead and latch bolt 3 locking points CARATTERISTICHE COSTRUTTIVE: Scatola e coperchio in acciaio zincato e plastificato - Frontale in acciaio inox - Catenaccio autocentrante in acciaio nichelato con sistema antiscasso - Scrocco in ottone nichelato - Pistone di ricarica in acciaio nichelato - Bobina cod. 038 (12V-10W a.c./d.c.) CE - Cilindro a spillo cod. 4052 o 4052/1 (con chiavi lunghe). FUNZIONAMENTO: Catenaccio comandato dalla chiave - Scrocco comandato dalla chiave, dal comando elettrico a distanza o dal pulsante meccanico cod. 058 - Il funzionamento è garantito anche in mancanza di corrente. FERMO A GIORNO: Con il pulsante meccanico cod. 059 è consentito il bloccaggio dell’elettroserratura in posizione di “aperto”. MANO: Reversibile. PARTI IN DOTAZIONE: 3 chiavi, 2 borchie cod. 0441 N, sottofrontale cod. 0623 N (frontale mm.25) oppure 2 cod. 0625 N (frontale mm.22), viti di fissaggio in acciaio inox, istruzioni di montaggio. CONSTRUCTIVE FEATURES: Zinc and plastic plated steel case and cover - Stainless steel forend - Nickel-plated steel self-centering dead bolt with lock-picking system - Nickel-plated brass latch bolt - Nickel-plated steel piston - Coil set cod. 038 (12V-10W a.c./d.c.) CE - Cross cylinder cod.4052 or 4052/1 (with long keys). WORKING: Key driven dead bolt - Key, remote control or push-button cod. 058 driven latch bolt - Working is assured also without current. HOLD OPEN DEVICE: With push-button cod. 059, it is possible to block the electric lock in its “open” position. HAND: Reversible. PROVIDED WITH: 3 keys, 2 roses cod. 0441 N, forend spacer cod. 0623 N (forend 25 mm.) or 2 cod. 0625 N (forend 22 mm.), stainless steel fixing screws, assembling instructions. COD. 4468 mandate throws 25254024 4100 10,741 5 4468/F22 25224024 4100 10,721 5 4478 30254524 4100 10,771 5 4478/F22 30224524 4100 10,751 5 35255024 4100 10,821 5 4488/F22 35225024 4100 10,801 5 Chiavi lunghe - Long keys ----/1 4101 - +0,02 4488 158 EF AM Serrature di sicurezza ad ingranaggi per montanti Vertical security locks with gear mechanism movement Intercambiabile con tutte le serrature di sicurezza per montanti con catenaccio basculante Interchangeable with all vertical security locks with tipping dead bolt Intercambiabilità scrocco/rullo Interchangeability latch bolt/roller bolt Scrocco regolabile ~ 5 mm Adjustable latch bolt ~ 5 mm Rullo cod. 01435 Roller bolt cod. 01435 Predisposizione per chiusure supplementari (3/5 punti di chiusura) Additional locking points device (3/5 locking points) Meccanismo ad ingranaggi che riduce lo sforzo sulla chiave Scatola chiusa per evitare che trucioli entrino nella serratura Gear mechanism movement that reduces the operating force to turn the key Closed lock case to stop profile machining chips from entering the mechanism Tappo cod. 01431 Plug cod. 01431 Catenaccio autocentrante a scorrimento orizzontale con sistema antiscasso Self-centering advancing dead bolt with lock-picking system Progettata e testata secondo la norma europea EN 12209 Designed and tested according to european standard EN 12209 Predisposizione per montaggio della borchia di protezione del cilindro (defender) Designed to be fitted with security escutcheon providing additional protection for the cylinder Interasse maniglia/cilindro 85 mm e 92 mm Handle/cylinder centre distance 85 mm and 92 mm 159 Serrature di sicurezza ad ingranaggi per montanti Vertical security locks with gear mechanism movements Catenaccio e scrocco regolabile - Dead and adjustable latch bolt Scrocco intercambiabile con rullo cod. 01435 - CARATTERISTICHE COSTRUTTIVE: Scatola chiusa e coperchio in acciaio zincato e plastificato - Frontale in acciaio inox - Catenaccio autocentrante in lega speciale nichelata con sistema antiscasso - Scrocco in lega speciale nichelata - Ingegno maniglia in lega speciale zincata foro mm.8. FUNZIONAMENTO: Catenaccio comandato dalla chiave - Scrocco comandato dalla chiave o dalla maniglia. MANO: Reversibile. PARTI IN DOTAZIONE: 2 borchie cod. 0120 N, sottofrontale cod. 0623 N (frontale 25 mm.) oppure 2 cod. 0625 N (frontale 22 mm.), vite cilindro, viti di fissaggio in acciaio inox, istruzioni di montaggio. CONSTRUCTIVE FEATURES: Zinc and plastic plated steel closed case and cover - Stainless steel forend - Special nickel-plated alloy selfcentering dead bolt with lock-picking system - Special nickel-plated alloy latch bolt - Special zinc-plated alloy square spindle device mm.8. WORKING: Key driven dead bolt - Handle or key driven latch bolt. HAND: Reversible. PROVIDED WITH: 2 roses cod. 0120 N, forend spacer cod. 0623 N (forend 25 mm.) or 2 cod. 0625 N (forend 22 mm.), cylinder screw, stainless steel fixing screws, assembling instructions. Catenaccio e scrocco regolabile - COD. interasse EFA M centre distance mandate throws 1600.25.25252541 20 85 20,781 5 1600.25.22252241 20 85 20,761 5 1600.30.25302546 20 85 20,821 5 1600.30.22302246 20 85 20,801 5 1600.35.25352551 20 85 20,861 5 1600.35.22352251 20 85 20,841 5 1600.40.25402556 20 85 20,901 5 1600.40.22402256 20 85 20,881 5 Dead and adjustable latch bolt Scrocco intercambiabile con rullo cod. 01435 - CARATTERISTICHE COSTRUTTIVE: Scatola chiusa e coperchio in acciaio zincato e plastificato - Frontale in acciaio inox - Catenaccio autocentrante in lega speciale nichelata con sistema antiscasso - Scrocco in lega speciale nichelata - Ingegno maniglia in lega speciale zincata foro mm.8. FUNZIONAMENTO: Catenaccio comandato dalla chiave - Scrocco comandato dalla chiave o dalla maniglia. MANO: Reversibile. PARTI IN DOTAZIONE: 2 borchie cod. 0120 N, sottofrontale cod. 0623 N (frontale 25 mm.) oppure 2 cod. 0625 N (frontale 22 mm.), vite cilindro, viti di fissaggio in acciaio inox, istruzioni di montaggio. CONSTRUCTIVE FEATURES: Zinc and plastic plated steel closed case and cover - Stainless steel forend - Special nickel-plated alloy selfcentering dead bolt with lock-picking system - Special nickel-plated alloy latch bolt - Special zinc-plated alloy square spindle device mm.8. WORKING: Key driven dead bolt - Handle or key driven latch bolt. HAND: Reversible. PROVIDED WITH: 2 roses cod. 0120 N, forend spacer cod. 0623 N (forend 25 mm.) or 2 cod. 0625 N (forend 22 mm.), cylinder screw, stainless steel fixing screws, assembling instructions. 160 Latch bolt interchangeable into roller bolt cod. 01435 Latch bolt interchangeable into roller bolt cod. 01435 COD. interasse EFA M centre distance interasse 92 mm centre distance 92 mm mandate throws 1620.25.25252541 20 92 2 0,78 1 5 1620.25.22252241 20 92 2 0,76 1 5 1620.30.25302546 20 92 2 0,82 1 5 1620.30.22302246 20 92 2 0,80 1 5 1620.35.25352551 20 92 2 0,86 1 5 1620.35.22352251 20 92 2 0,84 1 5 1620.40.25402556 20 92 2 0,90 1 5 1620.40.22402256 20 92 2 0,88 1 5 Serrature di sicurezza ad ingranaggi per montanti Vertical security locks with gear mechanism movements Catenaccio - Dead bolt CARATTERISTICHE COSTRUTTIVE: Scatola chiusa e coperchio in interasse mandate acciaio zincato e plastificato - Frontale in acciaio inox - Catenaccio COD. EFA M centre distance throws autocentrante in lega speciale nichelata con sistema antiscasso. FUNZIONAMENTO: Catenaccio comandato dalla chiave. MANO: Unica. 1601.25.25252541 20 85 20,701 5 PARTI IN DOTAZIONE: 2 borchie cod. 0120 N, sottofrontale cod. 0623 N (frontale 25 mm.) oppure 2 cod. 0625 N (frontale 22 mm.), 1601.25.22252241 20 85 20,681 5 vite cilindro, viti di fissaggio in acciaio inox, istruzioni di montaggio. CONSTRUCTIVE FEATURES: Zinc and plastic plated steel closed case and cover - Stainless steel forend - Special nickel-plated alloy selfcentering dead bolt with lock-picking system. WORKING: Key driven dead bolt. HAND: No hand. PROVIDED WITH: 2 roses cod. 0120 N, forend spacer cod. 0623 N (forend 25 mm.) or 2 cod. 0625 N (forend 22 mm.), cylinder screw, stainless steel fixing screws, assembling instructions. 1601.30.25302546 20 85 20,741 5 1601.30.22302246 20 85 20,721 5 1601.35.25352551 20 85 20,781 5 1601.35.22352251 20 85 20,761 5 1601.40.25402556 20 85 20,821 5 1601.40.22402256 20 85 20,801 5 Catenaccio - Dead bolt interasse 92 mm centre distance 92 mm CARATTERISTICHE COSTRUTTIVE: Scatola chiusa e coperchio in interasse mandate acciaio zincato e plastificato - Frontale in acciaio inox - Catenaccio COD. EFA M centre distance throws autocentrante in lega speciale nichelata con sistema antiscasso. FUNZIONAMENTO: Catenaccio comandato dalla chiave. MANO: Unica. 1621.25.25252541 20 92 2 0,70 1 PARTI IN DOTAZIONE: 2 borchie cod. 0120 N, sottofrontale cod. 0623 N (frontale 25 mm.) oppure 2 cod. 0625 N (frontale 22 mm.), 1621.25.22252241 20 92 2 0,68 1 vite cilindro, viti di fissaggio in acciaio inox, istruzioni di montaggio. CONSTRUCTIVE FEATURES: Zinc and plastic plated steel closed case and cover - Stainless steel forend - Special nickel-plated alloy selfcentering dead bolt with lock-picking system. WORKING: Key driven dead bolt. HAND: No hand. PROVIDED WITH: 2 roses cod. 0120 N, forend spacer cod. 0623 N (forend 25 mm.) or 2 cod. 0625 N (forend 22 mm.), cylinder screw, stainless steel fixing screws, assembling instructions. 5 5 1621.30.25302546 20 92 2 0,74 1 5 1621.30.22302246 20 92 2 0,72 1 5 1621.35.25352551 20 92 2 0,78 1 5 1621.35.22352251 20 92 2 0,76 1 5 1621.40.25402556 20 92 2 0,82 1 5 1621.40.22402256 20 92 2 0,80 1 5 161 Serrature di sicurezza ad ingranaggi per montanti Vertical security locks with gear mechanism movements Catenaccio e rullo regolabile - Dead and adjustable roller bolt CARATTERISTICHE COSTRUTTIVE: Scatola chiusa e coperchio in acciaio interasse mandate zincato e plastificato - Frontale in acciaio inox - Catenaccio autocentrante COD. EFA M centre distance throws in lega speciale nichelata con sistema antiscasso - Rullo in ottone nichelato. FUNZIONAMENTO: Catenaccio comandato dalla chiave - Rullo comandato 1605.25.25252541 20 85 20,781 5 a pressione o dalla chiave. MANO: Unica. 1605.25.22252241 20 85 20,761 5 PARTI IN DOTAZIONE: 2 borchie cod. 0120 N, sottofrontale cod. 0623 N (frontale 25 mm.) oppure 2 cod. 0625 N (frontale 22 mm.), vite cilindro, 1605.30.25302546 20 85 20,821 5 viti di fissaggio in acciaio inox, istruzioni di montaggio. 1605.30.22302246 20 85 20,801 5 CONSTRUCTIVE FEATURES: Zinc and plastic plated steel closed case and cover - Stainless steel forend - Special nickel-plated alloy self-centering dead bolt with lock-picking system - Nickel-plated brass roller bolt. WORKING: Key driven dead bolt - Pressure or key driven roller bolt. HAND: No hand. PROVIDED WITH: 2 roses cod. 0120 N, forend spacer cod. 0623 N (forend 25 mm.) or 2 cod. 0625 N (forend 22 mm.), cylinder screw, stainless steel fixing screws, assembling instructions. Catenaccio e rullo regolabile - 1605.35.25352551 20 85 20,861 5 1605.35.22352251 20 85 20,841 5 1605.40.25402556 20 85 20,901 5 1605.40.22402256 20 85 20,881 5 Dead and adjustable roller bolt interasse 92 mm centre distance 92 mm CARATTERISTICHE COSTRUTTIVE: Scatola chiusa e coperchio in acciaio interasse mandate zincato e plastificato - Frontale in acciaio inox - Catenaccio autocentrante COD. EFAM centre distance throws in lega speciale nichelata con sistema antiscasso - Rullo in ottone nichelato. FUNZIONAMENTO: Catenaccio comandato dalla chiave - Rullo comandato 1625.25.25252541 20 92 2 0,78 1 a pressione o dalla chiave. MANO: Unica. 1625.25.22252241 20 92 2 0,76 1 PARTI IN DOTAZIONE: 2 borchie cod. 0120 N, sottofrontale cod. 0623 N (frontale 25 mm.) oppure 2 cod. 0625 N (frontale 22 mm.), vite cilindro, 1625.30.25302546 20 92 2 0,82 1 viti di fissaggio in acciaio inox, istruzioni di montaggio. CONSTRUCTIVE FEATURES: Zinc and plastic plated steel closed case and cover - Stainless steel forend - Special nickel-plated alloy self-centering dead bolt with lock-picking system - Nickel-plated brass roller bolt. WORKING: Key driven dead bolt - Pressure or key driven roller bolt. HAND: No hand. PROVIDED WITH: 2 roses cod. 0120 N, forend spacer cod. 0623 N (forend 25 mm.) or 2 cod. 0625 N (forend 22 mm.), cylinder screw, stainless steel fixing screws, assembling instructions. 162 5 5 5 1625.30.22302246 20 92 2 0,80 1 5 1625.35.25352551 20 92 2 0,86 1 5 1625.35.22352251 20 92 2 0,84 1 5 1625.40.25402556 20 92 2 0,90 1 5 1625.40.22402256 20 92 2 0,88 1 5 Serrature di sicurezza ad ingranaggi per montanti Vertical security locks with gear mechanism movements Catenaccio e scrocco regolabile 3 punti di chiusura Scrocco intercambiabile con rullo cod. 01435 - CARATTERISTICHE COSTRUTTIVE: Scatola chiusa e coperchio in acciaio zincato e plastificato - Frontale in acciaio inox - Catenaccio autocentrante in lega speciale nichelata con sistema antiscasso Scrocco in lega speciale nichelata - Ingegno maniglia in lega speciale zincata foro mm.8. FUNZIONAMENTO: Catenaccio comandato dalla chiave - Scrocco comandato dalla chiave o dalla maniglia. MANO: Reversibile. PARTI IN DOTAZIONE: 2 borchie cod. 0120 N, sottofrontale cod. 0623 N (frontale 25 mm.) oppure 2 cod. 0625 N (frontale 22 mm.), vite cilindro, viti di fissaggio in acciaio inox, istruzioni di montaggio. CONSTRUCTIVE FEATURES: Zinc and plastic plated steel closed case and cover - Stainless steel forend - Special nickel-plated alloy selfcentering dead bolt with lock-picking system - Special nickel-plated alloy latch bolt - Special zinc-plated alloy square spindle device mm.8. WORKING: Key driven dead bolt - Handle or key driven latch bolt. HAND: Reversible. PROVIDED WITH: 2 roses cod. 0120 N, forend spacer cod. 0623 N (forend 25 mm.) or 2 cod. 0625 N (forend 22 mm.), cylinder screw, stainless steel fixing screws, assembling instructions. COD. interasse EFAM centre distance CARATTERISTICHE COSTRUTTIVE: Scatola chiusa e coperchio in acciaio zincato e plastificato - Frontale in acciaio inox - Catenaccio autocentrante in lega speciale nichelata con sistema antiscasso Scrocco in lega speciale nichelata - Ingegno maniglia in lega speciale zincata foro mm.8. FUNZIONAMENTO: Catenaccio comandato dalla chiave - Scrocco comandato dalla chiave o dalla maniglia. MANO: Reversibile. PARTI IN DOTAZIONE: 2 borchie cod. 0120 N, sottofrontale cod. 0623 N (frontale 25 mm.) oppure 2 cod. 0625 N (frontale 22 mm.), vite cilindro, viti di fissaggio in acciaio inox, istruzioni di montaggio. CONSTRUCTIVE FEATURES: Zinc and plastic plated steel closed case and cover - Stainless steel forend - Special nickel-plated alloy selfcentering dead bolt with lock-picking system - Special nickel-plated alloy latch bolt - Special zinc-plated alloy square spindle device mm.8. WORKING: Key driven dead bolt - Handle or key driven latch bolt. HAND: Reversible. PROVIDED WITH: 2 roses cod. 0120 N, forend spacer cod. 0623 N (forend 25 mm.) or 2 cod. 0625 N (forend 22 mm.), cylinder screw, stainless steel fixing screws, assembling instructions. mandate throws 1610.25.25252541 20 85 20,801 5 1610.25.22252241 20 85 20,781 5 1610.30.25302546 20 85 20,841 5 1610.30.22302246 20 85 20,821 5 1610.35.25352551 20 85 20,881 5 1610.35.22352251 20 85 20,861 5 1610.40.25402556 20 85 20,921 5 1610.40.22402256 20 85 20,901 5 Catenaccio e scrocco regolabile 3 punti di chiusura Scrocco intercambiabile con rullo cod. 01435 - Dead and adjustable latch bolt 3 locking points Latch bolt interchangeable into roller bolt cod. 01435 Dead and adjustable latch bolt 3 locking points Latch bolt interchangeable into roller bolt cod. 01435 COD. interasse EFAM centre distance interasse 92 mm centre distance 92 mm mandate throws 1630.25.25252541 20 92 2 1630.25.22252241 20 92 2 0,78 1 0,80 1 5 5 1630.30.25302546 20 92 2 0,84 1 5 1630.30.22302246 20 92 2 0,82 1 5 1630.35.25352551 20 92 2 0,88 1 5 1630.35.22352251 20 92 2 0,86 1 5 1630.40.25402556 20 92 2 0,92 1 5 1630.40.22402256 20 92 2 0,90 1 5 163 Serrature di sicurezza ad ingranaggi per montanti Vertical security locks with gear mechanism movements Catenaccio 3 punti di chiusura - Dead bolt 3 locking points CARATTERISTICHE COSTRUTTIVE: Scatola chiusa e coperchio in interasse mandate acciaio zincato e plastificato - Frontale in acciaio inox - Catenaccio COD. EFAM centre distance throws autocentrante in lega speciale nichelata con sistema antiscasso. FUNZIONAMENTO: Catenaccio comandato dalla chiave. 1611.25.25252541 20 85 20,721 5 MANO: Unica. PARTI IN DOTAZIONE: 2 borchie cod. 0120 N, sottofrontale cod. 1611.25.22252241 20 85 20,701 5 0623 N (frontale 25 mm.) oppure 2 cod. 0625 N (frontale 22 mm.), vite cilindro, viti di fissaggio in acciaio inox, istruzioni di montaggio. 1611.30.25302546 20 85 20,761 5 CONSTRUCTIVE FEATURES: Zinc and plastic plated steel closed case and cover - Stainless steel forend - Special nickel-plated alloy self-centering dead bolt with lock-picking system. WORKING: Key driven dead bolt. HAND: No hand. PROVIDED WITH: 2 roses cod. 0120 N, forend spacer cod. 0623 N (forend 25 mm.) or 2 cod. 0625 N (forend 22 mm.), cylinder screw, stainless steel fixing screws, assembling instructions. Catenaccio 3 punti di chiusura - 1611.30.22302246 20 85 20,741 5 1611.35.25352551 20 85 20,801 5 1611.35.22352251 20 85 20,781 5 1611.40.25402556 20 85 20,841 5 1611.40.22402256 20 85 20,821 5 Dead bolt 3 locking points interasse 92 mm centre distance 92 mm CARATTERISTICHE COSTRUTTIVE: Scatola chiusa e coperchio in interasse mandate acciaio zincato e plastificato - Frontale in acciaio inox - Catenaccio COD. EFAM centre distance throws autocentrante in lega speciale nichelata con sistema antiscasso. FUNZIONAMENTO: Catenaccio comandato dalla chiave. 1631.25.25252541 20 92 2 0,72 1 MANO: Unica. PARTI IN DOTAZIONE: 2 borchie cod. 0120 N, sottofrontale cod. 1631.25.22252241 20 92 2 0,70 1 0623 N (frontale 25 mm.) oppure 2 cod. 0625 N (frontale 22 mm.), vite cilindro, viti di fissaggio in acciaio inox, istruzioni di montaggio. 1631.30.25302546 20 92 2 0,76 1 CONSTRUCTIVE FEATURES: Zinc and plastic plated steel closed case and cover - Stainless steel forend - Special nickel-plated alloy self-centering dead bolt with lock-picking system. WORKING: Key driven dead bolt. HAND: No hand. PROVIDED WITH: 2 roses cod. 0120 N, forend spacer cod. 0623 N (forend 25 mm.) or 2 cod. 0625 N (forend 22 mm.), cylinder screw, stainless steel fixing screws, assembling instructions. 164 5 5 5 1631.30.22302246 20 92 2 0,74 1 5 1631.35.25352551 20 92 2 0,80 1 5 1631.35.22352251 20 92 2 0,78 1 5 1631.40.25402556 20 92 2 0,84 1 5 1631.40.22402256 20 92 2 0,82 1 5 Serrature di sicurezza ad ingranaggi per montanti Vertical security locks with gear mechanism movements Catenaccio e rullo regolabile 3 punti di chiusura - CARATTERISTICHE COSTRUTTIVE: Scatola chiusa e coperchio in acciaio zincato e plastificato - Frontale in acciaio inox - Catenaccio autocentrante in lega speciale nichelata con sistema antiscasso Rullo in ottone nichelato. FUNZIONAMENTO: Catenaccio comandato dalla chiave - Rullo comandato a pressione o dalla chiave. MANO: Unica. PARTI IN DOTAZIONE: 2 borchie cod. 0120 N, sottofrontale cod. 0623 N (frontale 25 mm.) oppure 2 cod. 0625 N (frontale 22 mm.), vite cilindro, viti di fissaggio in acciaio inox, istruzioni di montaggio. CONSTRUCTIVE FEATURES: Zinc and plastic plated steel closed case and cover - Stainless steel forend - Special nickel-plated alloy self-centering dead bolt with lock-picking system - Nickel-plated brass roller bolt. WORKING: Key driven dead bolt - Pressure or key driven roller bolt. HAND: No hand. PROVIDED WITH: 2 roses cod. 0120 N, forend spacer cod. 0623 N (forend 25 mm.) or 2 cod. 0625 N (forend 22 mm.), cylinder screw, stainless steel fixing screws, assembling instructions. COD. Dead and adjustable roller bolt 3 locking points interasse EFAM centre distance mandate throws 1615.25.25252541 20 85 20,801 5 1615.25.22252241 20 85 20,781 5 1615.30.25302546 20 85 20,841 5 1615.30.22302246 20 85 20,821 5 1615.35.25352551 20 85 20,881 5 1615.35.22352251 20 85 20,861 5 1615.40.25402556 20 85 20,921 5 1615.40.22402256 20 85 20,901 5 Catenaccio e rullo regolabile 3 punti di chiusura - Dead and adjustable roller bolt 3 locking points interasse 92 mm centre distance 92 mm CARATTERISTICHE COSTRUTTIVE: Scatola chiusa e coperchio in acciaio zincato e plastificato - Frontale in acciaio inox - Catenaccio autocentrante in lega speciale nichelata con sistema antiscasso Rullo in ottone nichelato. FUNZIONAMENTO: Catenaccio comandato dalla chiave - Rullo comandato a pressione o dalla chiave. MANO: Unica. PARTI IN DOTAZIONE: 2 borchie cod. 0120 N, sottofrontale cod. 0623 N (frontale 25 mm.) oppure 2 cod. 0625 N (frontale 22 mm.), vite cilindro, viti di fissaggio in acciaio inox, istruzioni di montaggio. CONSTRUCTIVE FEATURES: Zinc and plastic plated steel closed case and cover - Stainless steel forend - Special nickel-plated alloy self-centering dead bolt with lock-picking system - Nickel-plated brass roller bolt. WORKING: Key driven dead bolt - Pressure or key driven roller bolt. HAND: No hand. PROVIDED WITH: 2 roses cod. 0120 N, forend spacer cod. 0623 N (forend 25 mm.) or 2 cod. 0625 N (forend 22 mm.), cylinder screw, stainless steel fixing screws, assembling instructions. COD. interasse EFAM centre distance mandate throws 1635.25.25252541 20 92 2 0,80 1 5 1635.25.22252241 20 92 2 0,78 1 5 1635.30.25302546 20 92 2 0,84 1 5 1635.30.22302246 20 92 2 0,82 1 5 1635.35.25352551 20 92 2 0,88 1 5 1635.35.22352251 20 92 2 0,86 1 5 1635.40.25402556 20 92 2 0,92 1 5 1635.40.22402256 20 92 2 0,90 1 5 165 166 Kit per chiusure supplementari Kits for additional locking points Aste esterne Aste esterne Aste interne External rods Internal rods (agganciate direttamente) External rods Horizontal locks Serrature per fasce (direct connection) non applicabile Vertical locks Serrature per montanti not applicable COD. COD. COD. COD. COD. Aste 3 punti di chiusura 0670 0671 0674 0675 0630T Deviatori basculanti 3 punti di chiusura 0680 0681 0682 0684 _ 0689 Deviatori basculanti 5 punti di chiusura 0690 0691 0692 0694 _ 0699 0780 0781 0782 0784 _ 0789 3 locking points rods 3 locking points tipping deviators 5 locking points tipping deviators Deviatori avanzanti 3/5 punti di chiusura 3/5 locking points advancing deviators 167 Kit per chiusure supplementari Kits for additional locking points Kit aste interne - Internal rods kit COD. 0670 0670 E Descrizione - Description Kit completo - Complete kit 0,4810 - Kit senza 0630 T - Kit without 0630 T 0,4610 - Parti in dotazione: 2 aste cod. AST001, 2 pinze guida asta cod. ANY031, 2 boccole cod. ANY032, boccola cod. ANY033, 2 puntali antisega cod. PRS071, prolunga cod. PRS070, boccola a pavimento cod. 0630 T. Provided with: 2 rods cod AST001, 2 rod guide cod.ANY031, 2 bushings cod. ANY032, bushing cod. ANY033, 2 steel - saw resistant tip cod. PRS071, pin joint cod.PRS070, floor striker cod. 0630 T. Kit aste esterne - External rods kit COD. 0671 0671 E Descrizione - Description Kit completo - Complete kit 0,0610 - Kit senza 0630 T - Kit without 0630 T 0,0410 - Parti in dotazione: 2 piastrine di collegamento cod. PSR028 con viti, boccola a pavimento cod. 0630 T. Provided with: 2 connecting plates cod. PSR028 with screws, floor striker cod. 0630 T. Kit per aste interne filettate M8 - Kit for internal threaded M8 rods COD. 0673 Parti in dotazione: 2 blocchetti cod. NGM019 in lega speciale. Provided with: 2 special alloy connecter cod. NGM019. 168 0,0410 - Kit per chiusure supplementari Kits for additional locking points Kit aste esterne - External rods kit COD. Descrizione - Description 0674 0674 E Kit completo - Complete kit 0,0410 - Kit senza 0630 T - Kit without 0630 T 0,0210 - Parti in dotazione: 2 piastrine di collegamento cod. PSR073, boccola a pavimento cod. 0630 T. Provided with: 2 connecting plates cod. PSR073, floor striker cod. 0630 T. Kit aste esterne - NEW External rods kit COD. 0675 0,0510 - Parti in dotazione: 2 piastrine di collegamento cod. PSR093 Provided with: 2 connecting plates cod. PSR093 Per serrature serie - For locks series cod. 1460-1461-1462-1465-1466-1467-1468-1470-1471-1472-1475-1476-1477-1478-1480-1481 -1482-1485-1486-1487-1488-1610-1611-1615-1630-1631-1635-4460-4461-4462-4465-4466 -4467-4468-4470-4471-4472-4475-4476-4477-4478-4480-4481-4482-4485-4486-4487-4488 Boccola antipolvere in ottone a pavimento - Brass sprung dust floor striker COD. 0630 T 0,0210 - Parti in dotazione: Boccola a pavimento cod. 0630 T. Provided with: Floor striker cod 0630 T. 169 Kit per chiusure supplementari con catenaccio basculante Kits for additional locking points with tipping dead bolt Kit deviatori aste interne 3 punti di chiusura - COD. 0680 3 locking points internal rods deviators kit Cod. deviatore - Cod. deviator 0661 0680/F22 0661/F22 Frontale inox Stainless steel forend 25 0,881 - 22 0,861 - Parti in dotazione: 2 deviatori, 2 aste cod. AST002, 2 pinze guida asta cod. ANY031, viti di fissaggio in acciaio inox. Provided with: 2 deviators, 2 rods cod. AST002, 2 rod guide cod. ANY031, stainless steel fixing screws. Kit deviatori aste esterne 3 punti di chiusura - COD. 0681 3 locking points external rods deviators kit Cod. deviatore - Cod. deviator 0661 0681/F22 0661/F22 Frontale inox Stainless steel forend 25 0,921 - 22 0,901 - Parti in dotazione: 2 deviatori, 2 aste cod. AST003, viti di fissaggio in acciaio inox. Provided with: 2 deviators, 2 rods cod. AST003, stainless steel fixing screws. Kit deviatori aste esterne 3 punti di chiusura (con piastrine di collegamento) 3 locking points external rods deviators kit (with connecting plates) COD. 0682 Cod. deviatore - Cod. deviator 0661 0682/F22 0661/F22 Frontale inox Stainless steel forend 25 0,731 - 22 0,711 - Parti in dotazione: 2 deviatori, 4 piastrine di collegamento cod. PSR028 con viti, viti di fissaggio in acciaio inox. Provided with: 2 deviators, 4 connecting plates cod. PSR028 with screws, stainless steel fixing screws. 170 Kit per chiusure supplementari con catenaccio basculante Kits for additional locking points with tipping dead bolt Kit deviatori aste esterne 3 punti di chiusura (con piastrine di collegamento) 3 locking points external rods deviators kit (with connecting plates) COD. 0684 Cod. deviatore - Cod. deviator Frontale inox Stainless steel forend 0661 0684/F22 0661/F22 25 0,691 - 22 0,671 - Parti in dotazione: 2 deviatori, 4 piastrine di collegamento cod. PSR073. viti di fissaggio in acciaio inox. Provided with: 2 deviators, 4 connecting plates cod. PSR073. stainless steel fixing screws. Kit deviatori aste esterne 3 punti di chiusura (agganciate direttamente) 3 locking points external rods deviators kit (direct connection) COD. 0689 Cod. deviatore - Cod. deviator 0661 0689/F22 0661/F22 Frontale inox Stainless steel forend 25 0,681 - 22 0,661 - Parti in dotazione: 2 deviatori, viti di fissaggio in acciaio inox. Provided with: 2 deviators, stainless steel fixing screws. 171 Kit per chiusure supplementari con catenaccio basculante Kits for additional locking points with tipping dead bolt Kit deviatori aste interne 5 punti di chiusura - COD. 0690 5 locking points internal rods deviators kit Cod. deviatore - Cod. deviator 0662 0690/F22 0662/F22 Frontale inox Stainless steel forend 25 1,101 - 22 1,081 - Parti in dotazione: 2 deviatori, 3 aste cod. AST002, 4 pinze guida asta cod. ANY031, 2 boccole cod. ANY032, boccola cod. ANY033, 2 puntali antisega cod. PRS071, prolunga cod. PRS070, boccola a pavimento cod. 0630 T, viti di fissaggio in acciaio inox. Provided with: 2 deviators, 3 rods cod. AST002, 4 rod guide cod. ANY031, 2 bushings cod. ANY032, bushing cod. ANY033, 2 steel-saw resistant tip cod. PRS071, pin joint cod. PRS070, floor striker cod. 0630 T, stainless steel fixing screws. Kit deviatori aste esterne 5 punti di chiusura - COD. 0691 5 locking points external rods deviators kit Cod. deviatore - Cod. deviator 0662 0691/F22 0662/F22 Frontale inox Stainless steel forend 25 1,021 - 22 1,001 - Parti in dotazione: 2 deviatori, 2 aste cod. AST003, 2 piastrine di collegamento cod. PSR028 con viti, boccola a pavimento cod. 0630 T, viti di fissaggio in acciaio inox. Provided with: 2 deviators, 2 rods cod. AST003, 2 connecting plates cod. PSR028 with screws, floor striker cod. 0630 T, stainless steel fixing screws. Kit deviatori aste esterne 5 punti di chiusura (con piastrine di collegamento) 5 locking points external rods deviators kit (with connecting plates) COD. 0692 Cod. deviatore - Cod. deviator 0662 0692/F22 0662/F22 Frontale inox Stainless steel forend 25 0,851 - 22 0,831 - Parti in dotazione: 2 deviatori, 6 piastrine di collegamento cod. PSR028 con viti, boccola a pavimento cod. 0630 T, viti di fissaggio in acciaio inox. Provided with: 2 deviators, 6 connecting plates cod. PSR028 with screws, floor striker cod.0630 T, stainless steel fixing screws. 172 Kit per chiusure supplementari con catenaccio basculante Kits for additional locking points with tipping dead bolt Kit deviatori aste esterne 5 punti di chiusura (con piastrine di collegamento) 5 locking points external rods deviators kit (with connecting plates) COD. 0694 Cod. deviatore - Cod. deviator 0662 0694/F22 0662/F22 Frontale inox Stainless steel forend 25 0,791 - 22 0,771 - Parti in dotazione: 2 deviatori, 6 piastrine di collegamento cod. PSR073, boccola a pavimento cod. 0630 T, viti di fissaggio in acciaio inox. Provided with: 2 deviators, 6 connecting plates cod. PSR073, floor striker cod.0630 T, stainless steel fixing screws. Kit deviatori aste esterne 5 punti di chiusura (agganciate direttamente) 5 locking points external rods deviators kit (direct connection) COD. 0699 Cod. deviatore - Cod. deviator 0662 0699/F22 0662/F22 Frontale inox Stainless steel forend 25 0,721 - 22 0,701 - Parti in dotazione: 2 deviatori, boccola a pavimento cod. 0630 T, viti di fissaggio in acciaio inox. Provided with: 2 deviators, floor striker cod. 0630 T, stainless steel fixing screws. 173 Kit per chiusure supplementari con catenaccio avanzante Kits for additional locking points with advancing dead bolt Kit deviatori aste interne 3/5 punti di chiusura - COD. 0780 3/5 locking points internal rods deviators kit Cod. deviatore - Cod. deviator 0761 0780/F22 0761/F22 NEW Frontale inox Stainless steel forend 25 0,811 - 22 0,791 - Parti in dotazione: 2 deviatori, 2 aste cod. AST002, 2 pinze guida asta cod. ANY031, viti di fissaggio in acciaio inox. Provided with: 2 deviators, 2 rods cod. AST002, 2 rod guide cod. ANY031, stainless steel fixing screws. Kit deviatori aste esterne 3/5 punti di chiusura - COD. 0781 3/5 locking points external rods deviators kit Cod. deviatore - Cod. deviator 0761 0781/F22 0761/F22 NEW Frontale inox Stainless steel forend 25 0,851 - 22 0,831 - Parti in dotazione: 2 deviatori, 2 aste cod. AST003, viti di fissaggio in acciaio inox. Provided with: 2 deviators, 2 rods cod. AST003, stainless steel fixing screws. Kit deviatori aste esterne 3/5 punti di chiusura (con piastrine di collegamento) 3/5 locking points external rods deviators kit (with connecting plates) COD. 0782 Cod. deviatore - Cod. deviator 0761 0782/F22 0761/F22 Frontale inox Stainless steel forend 25 0,661 - 22 0,641 - Parti in dotazione: 2 deviatori, 4 piastrine di collegamento cod. PSR028 con viti, viti di fissaggio in acciaio inox. Provided with: 2 deviators, 4 connecting plates cod. PSR028 with screws, stainless steel fixing screws. 174 NEW Kit per chiusure supplementari con catenaccio avanzante Kits for additional locking points with advancing dead bolt Kit deviatori aste esterne 3/5 punti di chiusura (con piastrine di collegamento) 3/5 locking points external rods deviators kit (with connecting plates) COD. 0784 Cod. deviatore - Cod. deviator NEW Frontale inox Stainless steel forend 0761 0784/F22 0761/F22 25 0,621 - 22 0,601 - Parti in dotazione: 2 deviatori, 4 piastrine di collegamento cod. PSR073, viti di fissaggio in acciaio inox. Provided with: 2 deviators, 4 connecting plates cod. PSR073, stainless steel fixing screws. Kit deviatori aste esterne 3/5 punti di chiusura (agganciate direttamente) NEW 3/5 locking points external rods deviators kit (direct connection) COD. 0789 Cod. deviatore - Cod. deviator 0761 0789/F22 0761/F22 Frontale inox Stainless steel forend 25 0,611 - 22 0,591 - Parti in dotazione: 2 deviatori, viti di fissaggio in acciaio inox. Provided with: 2 deviators, stainless steel fixing screws. 175 176 178 Serrature multipunto per montanti Vertical multi-point locks Scrocco e rullo intercambiabili - Interchangeable latch bolt/roller bolt Scrocco regolabile ~ 5 mm Adjustable latch bolt ~ 5 mm Rullo cod. 01435 Roller bolt cod. 01435 COD. Per serrature serie cod. cod. For locks series cod. 01431 1160 - 1170 - 1180 tappo - plug Tappo cod. 01431 Plug cod. 01431 01435 rullo - roller bolt Montaggio cilindro a spillo - Per serrature serie cod. Cross key cylinder cod. For locks series cod. 4052 1160 - 1161 - 1165 - 1166 - 1167 - 1168 con chiavi lunghe long keys 1560 - 1570 - 1580 1660 - 1670 - 1680 Cross key cylinder assembly Cilindro a spillo cod. 4052/1 1260 - 1270 - 1280 1170 - 1171 - 1175 - 1176 - 1177 - 1178 1180 - 1181 - 1185 - 1186 - 1187 - 1188 1260 - 1261 - 1265 - 1266 - 1267 - 1268 1270 - 1271 - 1275 - 1276 - 1277 - 1278 1280 - 1281 - 1285 - 1286 - 1287 - 1288 1560 - 1561 - 1565 - 1566 - 1567 - 1568 1570 - 1571 - 1575 - 1576 - 1577 - 1578 1580 - 1581 - 1585 - 1586 - 1587 - 1588 1660 - 1661 - 1665 - 1666 - 1667 - 1668 1670 - 1671 - 1675 - 1676 - 1677 - 1678 1680 - 1681 - 1685 - 1686 - 1687 - 1688 179 Serrature multipunto per montanti Vertical multi-point locks 3 catenacci e scrocco regolabile - 3 dead bolts and adjustable latch bolt Scrocco intercambiabile con rullo cod. 01435 - Latch bolt interchangeable into roller bolt cod. 01435 CARATTERISTICHE COSTRUTTIVE: Scatole e coperchi in acciaio zincato e plastificato - Catenacci autocentranti in acciaio nichelato con sistema antiscasso - Scrocco in lega speciale nichelata - Ingegno maniglia in lega speciale zincata foro mm.8. FUNZIONAMENTO: Catenacci comandati dalla chiave - Scrocco comandato dalla chiave o dalla maniglia. MANO: Reversibile. PARTI IN DOTAZIONE: 2 borchie cod. 0120 N, 2 sottofrontali cod. 0633 N, vite cilindro, viti di fissaggio in acciaio inox (frontale inox) oppure in acciaio brunito (frontale verniciato), istruzioni di montaggio. CONSTRUCTIVE FEATURES: Zinc and plastic plated steel cases and covers - Nickelplated steel self-centering dead bolts with lock-picking system - Special nickel-plated alloy latch bolt - Special zinc-plated alloy square spindle device mm.8. WORKING: Key driven dead bolts - Handle or key driven latch bolt. HAND: Reversible. PROVIDED WITH: 2 roses cod. 0120 N, 2 forend spacers cod. 0633 N, cylinder screw, stainless steel fixing screws (stainless steel forend) or burnished steel fixing screws (painted forend), assembling instructions. COD. frontale E L AM forend mandate throws 1160 25157040 24 1 1,97 1 5 1170 Stainless steel 30157045 24 1 2,00 1 5 1180 35157050 24 1 2,03 1 5 25230040 24 1 2,30 1 5 Acciaio inox 1260 180 1270 Acciaio inox 30230045 24 Stainless steel 1280 35230050 24 1 2,36 1 5 1260 E 25230040 24 1 2,30 1 5 1270 E Verniciato nero 30230045 24 Black painted 1 2,33 1 5 1280 E 35230050 24 1 2,36 1 5 1 2,33 1 5 Serrature multipunto per montanti Vertical multi-point locks 3 catenacci - 3 dead bolts CARATTERISTICHE COSTRUTTIVE: Scatole e coperchi in acciaio zincato e plastificato - Catenacci autocentranti in acciaio nichelato con sistema antiscasso. FUNZIONAMENTO: Catenacci comandati dalla chiave. MANO: Unica. PARTI IN DOTAZIONE: 2 borchie cod. 0120 N, 2 sottofrontali cod. 0633 N, vite cilindro, viti di fissaggio in acciaio inox (frontale inox) oppure in acciaio brunito (frontale verniciato), istruzioni di montaggio. CONSTRUCTIVE FEATURES: Zinc and plastic plated steel cases and covers - Nickelplated steel self-centering dead bolts with lock-picking system. WORKING: Key driven dead bolts. HAND: No hand. PROVIDED WITH: 2 roses cod. 0120 N, 2 forend spacers cod. 0633 N, cylinder screw, stainless steel fixing screws (stainless steel forend) or burnished steel fixing screws (painted forend), assembling instructions. COD. frontale E L AM forend mandate throws 1161 25157040 24 1 1,90 1 5 1171 Stainless steel 30157045 24 1 1,93 1 5 1181 35157050 24 1 1,96 1 5 1261 25230040 24 1 2,23 1 5 Acciaio inox 1271 Acciaio inox 30230045 24 Stainless steel 1281 35230050 24 1 2,29 1 5 1261 E 25230040 24 1 2,23 1 5 1271 E Verniciato nero 30230045 24 Black painted 1 2,26 1 5 1281 E 35230050 24 1 2,29 1 5 1 2,26 1 5 181 Serrature multipunto per montanti Vertical multi-point locks 3 catenacci e rullo regolabile - 3 dead bolts and adjustable roller bolt CARATTERISTICHE COSTRUTTIVE: Scatole e coperchi in acciaio zincato e plastificato - Catenacci autocentranti in acciaio nichelato con sistema antiscasso - Rullo in ottone nichelato. FUNZIONAMENTO: Catenacci comandati dalla chiave - Rullo comandato a pressione o dalla chiave. MANO: Unica. PARTI IN DOTAZIONE: 2 borchie cod. 0120 N, 2 sottofrontali cod. 0633 N, vite cilindro, viti di fissaggio in acciaio inox (frontale inox) oppure in acciaio brunito (frontale verniciato), istruzioni di montaggio. CONSTRUCTIVE FEATURES: Zinc and plastic plated steel cases and covers - Nickel-plated steel self-centering dead bolts with lock-picking system - Nickel-plated brass roller bolt. WORKING: Key driven dead bolts - Pressure or key driven roller bolt. HAND: No hand. PROVIDED WITH: 2 roses cod. 0120 N, 2 forend spacers cod. 0633 N, cylinder screw, stainless steel fixing screws (stainless steel forend) or burnished steel fixing screws (painted forend), assembling instructions. COD. 182 frontale E L AM forend mandate throws 1165 25157040 24 1 2,00 1 5 1175 Stainless steel 30157045 24 1 2,03 1 5 1185 35157050 24 1 2,06 1 5 1265 25230040 24 1 2,33 1 5 1275 30230045 24 Stainless steel 1 2,36 1 5 1285 35230050 24 1 2,39 1 5 1265 E 25230040 24 1 2,33 1 5 1275 E Verniciato nero 30230045 24 Black painted 1 2,36 1 5 1285 E 35230050 24 1 2,39 1 5 Acciaio inox Acciaio inox Serrature multipunto per montanti Vertical multi-point locks 3 ganci - 3 hook bolts CARATTERISTICHE COSTRUTTIVE: Scatole e coperchi in acciaio zincato e plastificato - Ganci in acciaio nichelato. FUNZIONAMENTO: Ganci comandati dalla chiave. MANO: Unica. PARTI IN DOTAZIONE: 2 borchie cod. 0120 N, 2 sottofrontali cod. 0633 N, vite cilindro, viti di fissaggio in acciaio inox (frontale inox) oppure in acciaio brunito (frontale verniciato), istruzioni di montaggio. CONSTRUCTIVE FEATURES: Zinc and plastic plated steel cases and covers - Nickel-plated steel hook bolts. WORKING: Key driven hook bolts. HAND: No hand. PROVIDED WITH: 2 roses cod. 0120 N, 2 forend spacers cod. 0633 N, cylinder screw, stainless steel fixing screws (stainless steel forend) or burnished steel fixing screws (painted forend), assembling instructions. COD. frontale ELA forend mandate throws 1166 25157040 1 1,83 1 5 1176 Stainless steel 30157045 1 1,86 1 5 1186 35157050 1 1,89 1 5 1266 25230040 1 2,16 1 5 Acciaio inox 1276 Acciaio inox 30230045 Stainless steel 1286 35230050 1 2,22 1 5 1266 E 25230040 1 2,16 1 5 Black painted 1 2,19 1 5 1276 E 30230045 1 2,19 1 5 1286 E 35230050 1 2,22 1 5 183 Serrature multipunto per montanti Vertical multi-point locks 3 catenacci e scrocco regolabile - 3 dead bolts and adjustable latch bolt Scrocco intercambiabile con rullo cod. 01435 - Latch bolt interchangeable into roller bolt cod. 01435 CARATTERISTICHE COSTRUTTIVE: Scatole e coperchi in acciaio zincato e plastificato - Catenacci autocentranti in acciaio nichelato con sistema antiscasso - Scrocco in lega speciale nichelata - Ingegno maniglia in lega speciale zincata foro mm.8. FUNZIONAMENTO: Catenacci comandati dalla chiave - Scrocco comandato dalla chiave o dalla maniglia. MANO: Reversibile. PARTI IN DOTAZIONE: 2 borchie cod. 0120 N, vite cilindro, viti di fissaggio in acciaio inox (frontale inox) oppure in acciaio brunito (frontale verniciato), istruzioni di montaggio. CONSTRUCTIVE FEATURES: Zinc and plastic plated steel cases and covers - Nickelplated steel self-centering dead bolts with lock-picking system - Special nickel-plated alloy latch bolt - Special zinc-plated alloy square spindle device mm.8. WORKING: Key driven dead bolts - Handle or key driven latch bolt. HAND: Reversible. PROVIDED WITH: 2 roses cod. 0120 N, cylinder screw, stainless steel fixing screws (stainless steel forend) or burnished steel fixing screws (painted forend), assembling instructions. COD. frontale E L AM forend mandate throws 1560 25157040 24 1 1,91 1 5 1570 Stainless steel 30157045 24 1 1,94 1 5 1580 35157050 24 1 1,97 1 5 Acciaio inox 1660 184 25230040 24 1 2,30 1 5 1670 30230045 24 Stainless steel 1 2,33 1 5 1680 35230050 24 1 2,36 1 5 1660 E 25230040 24 1 2,35 1 5 1670 E 30230045 24 Black painted 1 2,38 1 5 1680 E 35230050 24 1 2,41 1 5 Acciaio inox Verniciato nero Serrature multipunto per montanti Vertical multi-point locks 3 catenacci - 3 dead bolts CARATTERISTICHE COSTRUTTIVE: Scatole e coperchi in acciaio zincato e plastificato - Catenacci autocentranti in acciaio nichelato con sistema antiscasso. FUNZIONAMENTO: Catenacci comandati dalla chiave. MANO: Unica. PARTI IN DOTAZIONE: 2 borchie cod. 0120 N, vite cilindro, viti di fissaggio in acciaio inox (frontale inox) oppure in acciaio brunito (frontale verniciato), istruzioni di montaggio. CONSTRUCTIVE FEATURES: Zinc and plastic plated steel cases and covers - Nickel-plated steel self-centering dead bolts with lock-picking system. WORKING: Key driven dead bolts. HAND: No hand. PROVIDED WITH: 2 roses cod. 0120 N, cylinder screw, stainless steel fixing screws (stainless steel forend) or burnished steel fixing screws (painted forend), assembling instructions. COD. frontale E L AM forend mandate throws 1561 25157040 24 1 1,84 1 5 1571 Stainless steel 30157045 24 1 1,87 1 5 1581 35157050 24 1 1,90 1 5 1661 25230040 24 1 2,23 1 5 1671 30230045 24 Stainless steel 1 2,26 1 5 1681 35230050 24 1 2,29 1 5 1661 E 25230040 24 1 2,28 1 5 1671 E Verniciato nero 30230045 24 Black painted 1 2,31 1 5 1681 E 35230050 24 1 2,34 1 5 Acciaio inox Acciaio inox 185 Serrature multipunto per montanti Vertical multi-point locks 3 catenacci e rullo regolabile - 3 dead bolts and adjustable roller bolt CARATTERISTICHE COSTRUTTIVE: Scatole e coperchi in acciaio zincato e plastificato - Catenacci autocentranti in acciaio nichelato con sistema antiscasso - Rullo in ottone nichelato. FUNZIONAMENTO: Catenacci comandati dalla chiave - Rullo comandato a pressione o dalla chiave. MANO: Unica. PARTI IN DOTAZIONE: 2 borchie cod. 0120 N, vite cilindro, viti di fissaggio in acciaio inox (frontale inox) oppure in acciaio brunito (frontale verniciato), istruzioni di montaggio. CONSTRUCTIVE FEATURES: Zinc and plastic plated steel cases and covers Nickel-plated steel self-centering dead bolts with lock-picking system - Nickel-plated brass roller bolt. WORKING: Key driven dead bolts - Pressure or key driven roller bolt. HAND: No hand. PROVIDED WITH: 2 roses cod. 0120 N, cylinder screw, stainless steel fixing screws (stainless steel forend) or burnished steel fixing screws (painted forend), assembling instructions. COD. 186 frontale E L AM forend mandate throws 1565 25157040 24 1 1,94 1 5 1575 Stainless steel 30157045 24 1 1,97 1 5 1585 35157050 24 1 2,00 1 5 1665 25230040 24 1 2,33 1 5 1675 30230045 24 Stainless steel 1 2,36 1 5 1685 35230050 24 1 2,39 1 5 1665 E 25230040 24 1 2,38 1 5 1675 E 30230045 24 Black painted 1 2,41 1 5 1685 E 35 2300 50 1 Acciaio inox Acciaio inox Verniciato nero 24 2,44 1 5 Serrature multipunto per montanti Vertical multi-point locks 3 ganci - 3 hook bolts CARATTERISTICHE COSTRUTTIVE: Scatole e coperchi in acciaio zincato e plastificato Ganci in acciaio nichelato. FUNZIONAMENTO: Ganci comandati dalla chiave. MANO: Unica. PARTI IN DOTAZIONE: 2 borchie cod. 0120 N, vite cilindro, viti di fissaggio in acciaio inox (frontale inox) oppure in acciaio brunito (frontale verniciato), istruzioni di montaggio. CONSTRUCTIVE FEATURES: Zinc and plastic plated steel cases and covers - Nickelplated steel hook bolts. WORKING: Key driven hook bolts. HAND: No hand. PROVIDED WITH: 2 roses cod. 0120 N, cylinder screw, stainless steel fixing screws (stainless steel forend) or burnished steel fixing screws (painted forend), assembling instructions. COD. frontale ELA forend mandate throws 1566 25157040 1 1,77 1 5 1576 Stainless steel 30157045 1 1,80 1 5 1586 35157050 1 1,83 1 5 1666 25230040 1 2,16 1 5 1676 30230045 Stainless steel 1 2,19 1 5 1686 35230050 1 2,22 1 5 1666 E 25230040 1 2,21 1 5 1676 E 30230045 Black painted 1 2,24 1 5 1686 E 35230050 1 2,27 1 5 Acciaio inox Acciaio inox Verniciato nero 187 Elettroserrature multipunto per montanti Vertical multi-point electric locks 3 catenacci, scrocco regolabile e pistone regolabile 3 dead bolts, adjustable latch bolt and adjustable piston CARATTERISTICHE COSTRUTTIVE: Scatole e coperchi in acciaio zincato e plastificato - Catenacci autocentranti in acciaio nichelato con sistema antiscasso - Scrocco in lega speciale nichelata - Pistone di ricarica in acciaio nichelato - Ingegno maniglia in lega speciale zincata foro mm.8 - Bobina cod. 037 (12V-10W a.c./d.c.) CE. FUNZIONAMENTO: Catenacci comandati dalla chiave - Scrocco comandato dalla chiave, dalla maniglia o dal comando elettrico a distanza - Il funzionamento è garantito anche in mancanza di corrente. MANO: Reversibile. PARTI IN DOTAZIONE: 2 borchie cod. 0120 N, 2 sottofrontali cod. 0633 N, vite cilindro, viti di fissaggio in acciaio inox, istruzioni di montaggio. CONSTRUCTIVE FEATURES: Zinc and plastic plated steel cases and covers - Nickelplated steel self-centering dead bolts with lock-picking system - Special nickel-plated alloy latch bolt - Nickel-plated steel piston - Special zinc-plated alloy square spindle device mm.8 - Coil set. cod. 037 (12V-10W a.c./d.c.) CE. WORKING: Key driven dead bolts - Key, handle or remote control driven latch bolt Working is assured also without current. HAND: Reversible. PROVIDED WITH: 2 roses cod. 0120 N, 2 forend spacers cod. 0633 N, cylinder screw, stainless steel fixing screws, assembling instructions. COD. 188 frontale E L AM forend mandate throws 1167 25157040 24 1177 30157045 24 Stainless steel 1 2,10 1 5 1187 35157050 24 1 2,13 1 5 1267 25230040 24 1 2,39 1 5 1277 Acciaio inox 30230045 24 Stainless steel 1 2,43 1 5 1287 35230050 24 1 2,46 1 5 Acciaio inox 1 2,06 1 5 Elettroserrature multipunto per montanti Vertical multi-point electric locks 3 catenacci e scrocco - 3 dead bolts and latch bolt CARATTERISTICHE COSTRUTTIVE: Scatole e coperchi in acciaio zincato e plastificato Catenacci autocentranti in acciaio nichelato con sistema antiscasso - Scrocco in ottone nichelato - Pistone di ricarica in acciaio nichelato - Bobina cod. 038 (12V-10W a.c./d.c.) CE. FUNZIONAMENTO: Catenacci comandati dalla chiave - Scrocco comandato dalla chiave, dal comando elettrico a distanza o dal pulsante meccanico cod. 058 - Il funzionamento è garantito anche in mancanza di corrente. FERMO A GIORNO: Con il pulsante meccanico cod. 059 è consentito il bloccaggio dell’elettroserratura in posizione di “aperto”. MANO: Reversibile. PARTI IN DOTAZIONE: 2 borchie cod. 0120 N, 2 sottofrontali cod. 0633 N, vite cilindro, viti di fissaggio in acciaio inox, istruzioni di montaggio. CONSTRUCTIVE FEATURES: Zinc and plastic plated steel cases and covers - Nickelplated steel self-centering dead bolts with lock-picking system - Nickel-plated brass latch bolt - Nickel-plated steel piston - Coil set. cod. 038 (12V-10W a.c./d.c.) CE. WORKING: Key driven dead bolts - Key, remote control or push-button cod. 058 driven latch bolt - Working is assured also without current. HOLD OPEN DEVICE: With push-button cod.059, it is possible to block the electric lock in its “open” position. HAND: Reversible. PROVIDED WITH: 2 roses cod. 0120 N, 2 forend spacers cod. 0633 N, cylinder screw, stainless steel fixing screws, assembling instructions. COD. frontale E L AM forend mandate throws 1168 25157040 24 1 1,97 1 5 1178 Stainless steel 30157045 24 1 2,00 1 5 1188 35157050 24 1 2,03 1 5 1268 25230040 24 1 2,30 1 5 1278 30230045 24 Stainless steel 1 2,33 1 5 1288 35230050 24 1 2,36 1 5 Acciaio inox Acciaio inox 189 Elettroserrature multipunto per montanti Vertical multi-point electric locks 3 catenacci, scrocco regolabile e pistone regolabile 3 dead bolts, adjustable latch bolt and adjustable piston CARATTERISTICHE COSTRUTTIVE: Scatole e coperchi in acciaio zincato e plastificato - Catenacci autocentranti in acciaio nichelato con sistema antiscasso - Scrocco in lega speciale nichelata - Pistone di ricarica in acciaio nichelato - Ingegno maniglia in lega speciale zincata foro mm.8 - Bobina cod. 037 (12V-10W a.c./d.c.) CE. FUNZIONAMENTO: Catenacci comandati dalla chiave - Scrocco comandato dalla chiave, dalla maniglia o dal comando elettrico a distanza - Il funzionamento è garantito anche in mancanza di corrente. MANO: Reversibile. PARTI IN DOTAZIONE: 2 borchie cod. 0120 N, vite cilindro, viti di fissaggio in acciaio inox, istruzioni di montaggio. CONSTRUCTIVE FEATURES: Zinc and plastic plated steel cases and covers - Nickelplated steel self-centering dead bolts with lock-picking system - Special nickel-plated alloy latch bolt - Nickel-plated steel piston - Special zinc-plated alloy square spindle device mm.8 - Coil set. cod. 037 (12V-10W a.c./d.c.) CE. WORKING: Key driven dead bolts - Key, handle or remote control driven latch bolt Working is assured also without current. HAND: Reversible. PROVIDED WITH: 2 roses cod. 0120 N, cylinder screw, stainless steel fixing screws, assembling instructions. COD. 190 frontale E L AM forend mandate throws 1567 25157040 24 1577 30157045 24 Stainless steel 1 2,04 1 5 1587 35157050 24 1 2,07 1 5 1667 25230040 24 1 2,33 1 5 1677 30230045 24 1 2,36 1 5 1687 35230050 24 1 2,39 1 5 Acciaio inox Acciaio inox Stainless steel 1 2,00 1 5 Elettroserrature multipunto per montanti Vertical multi-point electric locks 3 catenacci e scrocco - 3 dead bolts and latch bolt CARATTERISTICHE COSTRUTTIVE: Scatole e coperchi in acciaio zincato e plastificato Catenacci autocentranti in acciaio nichelato con sistema antiscasso - Scrocco in ottone nichelato - Pistone di ricarica in acciaio nichelato - Bobina cod. 038 (12V-10W a.c./d.c.) CE. FUNZIONAMENTO: Catenacci comandati dalla chiave - Scrocco comandato dalla chiave, dal comando elettrico a distanza o dal pulsante meccanico cod. 058 - Il funzionamento è garantito anche in mancanza di corrente. FERMO A GIORNO: Con il pulsante meccanico cod. 059 è consentito il bloccaggio dell’elettroserratura in posizione di “aperto”. MANO: Reversibile. PARTI IN DOTAZIONE: 2 borchie cod. 0120 N, vite cilindro, viti di fissaggio in acciaio inox, istruzioni di montaggio. CONSTRUCTIVE FEATURES: Zinc and plastic plated steel cases and covers - Nickel-plated steel self-centering dead bolts with lock-picking system - Nickel-plated brass latch bolt Nickel-plated steel piston - Coil set. cod. 038 (12V-10W a.c./d.c.) CE. WORKING: Key driven dead bolts - Key, remote control or push-button cod. 058 driven latch bolt - Working is assured also without current. HOLD OPEN DEVICE: With push-button cod. 059, it is possible to block the electric lock in its “open” position. HAND: Reversible. PROVIDED WITH: 2 roses cod. 0120 N, cylinder screw, stainless steel fixing screws, assembling instructions. COD. frontale E L AM forend mandate throws 1568 25157040 24 1 1,91 1 5 1578 Stainless steel 30157045 24 1 1,94 1 5 1588 35157050 24 1 1,97 1 5 1668 25230040 24 1 2,30 1 5 Acciaio inox 1678 Acciaio inox 30230045 24 Stainless steel 1688 35230050 24 1 2,33 1 5 1 2,36 1 5 191 192 Serrature multipunto ad ingranaggi per montanti Vertical multi-point locks with gear mechanism movements Intercambiabile con le serrature multipunto maggiormente diffuse sul mercato Interchangeable with the most popular multipoint locks in the market Predisposizione per punti di chiusura supplementari Catenacci supplementari a scorrimento orizzontale con uscita maggiorata Meccanismo ad ingranaggi che riduce lo sforzo sulla chiave Designed for additional locking points Gear mechanism movement that reduces the operating force to turn the key Advancing longer dead bolts Catenaccio autocentrante a scorrimento orizzontale con sistema antiscasso Self-centering advancing dead bolt with lock-picking system Intercambiabilità scrocco/rullo Interchangeability latch bolt/roller bolt Scrocco regolabile ~ 5 mm Adjustable latch bolt ~ 5 mm Rullo cod. 01435 Roller bolt cod. 01435 Tappo cod. 01431 Plug cod. 01431 Scatola chiusa per evitare che trucioli entrino nella serratura Closed lock case to stop profile machining chips from entering the mechanism Predisposizione per montaggio della borchia di protezione del cilindro (defender) Interasse maniglia/cilindro 85 mm e 92 mm Designed to be fitted with security escutcheon providing additional protection for the cylinder Handle/cylinder centre distance 85 mm and 92 mm Punti di chiusura indipendenti: qualora venga forzato uno dei catenacci i restanti rimangono in posizione di blocco Independent locking points: if one of the dead bolts is forced open the others stay closed Progettata e testata secondo il progetto di norma europea pr EN 15685 Designed and tested according to the draft european standard pr EN 15685 193 Serrature multipunto ad ingranaggi per montanti Vertical multi-point locks with gear mechanism movements 3 catenacci e scrocco regolabile - 3 dead bolts and adjustable latch bolt Scrocco intercambiabile con rullo cod. 01435 - Latch bolt interchangeable into roller bolt cod. 01435 CARATTERISTICHE COSTRUTTIVE: Scatole chiuse e coperchi in acciaio zincato e plastificato - Frontale in acciaio inox - Catenacci autocentranti in lega speciale nichelata con sistema antiscasso - Scrocco in lega speciale nichelata - Ingegno maniglia in lega speciale zincata foro mm.8. FUNZIONAMENTO: Catenacci comandati dalla chiave - Scrocco comandato dalla chiave o dalla maniglia. MANO: Reversibile. PARTI IN DOTAZIONE: 2 borchie cod. 0120 N, 2 sottofrontali cod. 0633 N, vite cilindro, viti di fissaggio in acciaio inox, istruzioni di montaggio. CONSTRUCTIVE FEATURES: Zinc and plastic plated steel closed cases and covers Stainless steel forend - Special nickel-plated alloy self-centering dead bolts with lockpicking system - Special nickel-plated alloy latch bolt - Special zinc-plated alloy square spindle device mm.8. WORKING: Key driven dead bolts - Handle or key driven latch bolt. HAND: Reversible. PROVIDED WITH: 2 roses cod. 0120 N, 2 forend spacers cod. 0633 N, cylinder screw, stainless steel fixing screws, assembling instructions. COD. 194 mandate throws 1700.25.UC25157041 20 85 2 1,97 1 5 1700.30.UC30157046 20 85 2 2,011 5 1700.35.UC35157051 20 85 2 2,05 1 5 1700.40.UC40157056 20 85 2 2,09 1 5 COD. interasse 92 mm centre distance 92 mm interasse E L AM centre distance interasse E L AM centre distance mandate throws 1720.25.UC25157041 20 92 2 1,971 5 1720.30.UC30157046 20 92 2 2,011 5 1720.35.UC35157051 20 92 2 92 2 2,091 5 1720.40.UC40157056 20 2,05 1 5 Serrature multipunto ad ingranaggi per montanti Vertical multi-point locks with gear mechanism movements 3 catenacci e scrocco regolabile - 3 dead bolts and adjustable latch bolt Scrocco intercambiabile con rullo cod. 01435 - Latch bolt interchangeable into roller bolt cod. 01435 CARATTERISTICHE COSTRUTTIVE: Scatole chiuse e coperchi in acciaio zincato e plastificato - Frontale in acciaio inox - Catenacci autocentranti in lega speciale nichelata con sistema antiscasso - Scrocco in lega speciale nichelata - Ingegno maniglia in lega speciale zincata foro mm.8. FUNZIONAMENTO: Catenacci comandati dalla chiave - Scrocco comandato dalla chiave o dalla maniglia. MANO: Reversibile. PARTI IN DOTAZIONE: 2 borchie cod. 0120 N, 2 sottofrontali cod. 0633 N, vite cilindro, viti di fissaggio in acciaio inox, istruzioni di montaggio. CONSTRUCTIVE FEATURES: Zinc and plastic plated steel closed cases and covers Stainless steel forend - Special nickel-plated alloy self-centering dead bolts with lockpicking system - Special nickel-plated alloy latch bolt - Special zinc-plated alloy square spindle device mm.8. WORKING: Key driven dead bolts - Handle or key driven latch bolt. HAND: Reversible. PROVIDED WITH: 2 roses cod. 0120 N, 2 forend spacers cod. 0633 N, cylinder screw, stainless steel fixing screws, assembling instructions. COD. interasse E L AM centre distance throws 1700.25.UL 25230041 20 85 2 2,30 1 5 1700.30.UL30230046 20 85 2 2,341 5 1700.35.UL 85 2 85 2 2,42 1 5 35 2300 51 20 1700.40.UL 40230056 20 COD. interasse 92 mm centre distance 92 mm mandate interasse E L AM centre distance 2,38 1 5 mandate throws 1720.25.UL 25230041 20 92 2 2,301 5 1720.30.UL30230046 20 92 2 2,341 5 1720.35.UL 35230051 20 92 2 92 2 2,421 5 1720.40.UL 40230056 20 2,38 1 5 195 Serrature multipunto ad ingranaggi per montanti Vertical multi-point locks with gear mechanism movements 3 catenacci - 3 dead bolts CARATTERISTICHE COSTRUTTIVE: Scatole chiuse e coperchi in acciaio zincato e plastificato - Frontale in acciaio inox - Catenacci autocentranti in lega speciale nichelata con sistema antiscasso. FUNZIONAMENTO: Catenacci comandati dalla chiave. MANO: Unica. PARTI IN DOTAZIONE: 2 borchie cod. 0120 N, 2 sottofrontali cod. 0633 N, vite cilindro, viti di fissaggio in acciaio inox, istruzioni di montaggio. CONSTRUCTIVE FEATURES: Zinc and plastic plated steel closed cases and covers - Stainless steel forend - Special nickel-plated alloy self-centering dead bolts with lockpicking system. WORKING: Key driven dead bolts. HAND: No hand. PROVIDED WITH: 2 roses cod. 0120 N, 2 forend spacers cod. 0633 N, cylinder screw, stainless steel fixing screws, assembling instructions. COD. interasse E L AM centre distance 85 2 1,90 1 5 1701.30.UC30157046 20 85 2 1,941 5 1701.35.UC 85 2 85 2 2,02 1 5 COD. 196 throws 1701.25.UC25157041 20 35 1570 51 20 1701.40.UC40157056 20 interasse 92 mm centre distance 92 mm mandate interasse E L AM centre distance 1,98 1 mandate throws 1721.25.UC25157041 20 92 2 1,901 5 1721.30.UC30157046 20 92 2 1,941 5 1721.35.UC35157051 20 92 2 92 2 2,021 5 1721.40.UC40157056 20 5 1,98 1 5 Serrature multipunto ad ingranaggi per montanti Vertical multi-point locks with gear mechanism movements 3 catenacci - 3 dead bolts CARATTERISTICHE COSTRUTTIVE: Scatole chiuse e coperchi in acciaio zincato e plastificato - Frontale in acciaio inox - Catenacci autocentranti in lega speciale nichelata con sistema antiscasso. FUNZIONAMENTO: Catenacci comandati dalla chiave. MANO: Unica. PARTI IN DOTAZIONE: 2 borchie cod. 0120 N, 2 sottofrontali cod. 0633 N, vite cilindro, viti di fissaggio in acciaio inox, istruzioni di montaggio. CONSTRUCTIVE FEATURES: Zinc and plastic plated steel closed cases and covers - Stainless steel forend - Special nickel-plated alloy self-centering dead bolts with lockpicking system. WORKING: Key driven dead bolts. HAND: No hand. PROVIDED WITH: 2 roses cod. 0120 N, 2 forend spacers cod. 0633 N, cylinder screw, stainless steel fixing screws, assembling instructions. COD. mandate throws 1701.25.UL 25230041 20 85 2 2,23 1 5 1701.30.UL30230046 20 85 2 2,271 5 1701.35.UL 35230051 20 85 2 2,31 1 5 1701.40.UL 40230056 20 85 2 2,35 1 5 COD. interasse 92 mm centre distance 92 mm centre distance E L AM interasse E L AM centre distance mandate throws 1721.25.UL 25230041 20 92 2 2,231 5 1721.30.UL30230046 20 92 2 2,271 5 1721.35.UL 35230051 20 92 2 92 2 2,351 5 1721.40.UL 40230056 20 2,31 1 5 197 Serrature multipunto ad ingranaggi per montanti Vertical multi-point locks with gear mechanism movements 3 catenacci e rullo regolabile - 3 dead bolts and adjustable roller bolt CARATTERISTICHE COSTRUTTIVE: Scatole chiuse e coperchi in acciaio zincato e plastificato - Frontale in acciaio inox - Catenacci autocentranti in lega speciale nichelata con sistema antiscasso - Rullo in ottone nichelato. FUNZIONAMENTO: Catenacci comandati dalla chiave - Rullo comandato a pressione o dalla chiave. MANO: Unica. PARTI IN DOTAZIONE: 2 borchie cod. 0120 N, 2 sottofrontali cod. 0633 N, vite cilindro, viti di fissaggio in acciaio inox, istruzioni di montaggio. CONSTRUCTIVE FEATURES: Zinc and plastic plated steel closed cases and covers - Stainless steel forend - Special nickel-plated alloy self-centering dead bolts with lockpicking system - Nickel-plated brass roller bolt. WORKING: Key driven dead bolts - Pressure or key driven roller bolt. HAND: No hand. PROVIDED WITH: 2 roses cod. 0120 N, 2 forend spacers cod. 0633 N, cylinder screw, stainless steel fixing screws, assembling instructions. COD. interasse E L AM centre distance 85 2 2,00 1 5 1705.30.UC30157046 20 85 2 2,041 5 1705.35.UC 85 2 85 2 2,12 1 5 COD. 198 throws 1705.25.UC25157041 20 35 1570 51 20 1705.40.UC40157056 20 interasse 92 mm centre distance 92 mm mandate interasse E L AM centre distance 2,08 1 5 mandate throws 1725.25.UC25157041 20 92 2 2,001 5 1725.30.UC30157046 20 92 2 2,041 5 1725.35.UC35157051 20 92 2 92 2 2,121 5 1725.40.UC40157056 20 2,08 1 5 Serrature multipunto ad ingranaggi per montanti Vertical multi-point locks with gear mechanism movements 3 catenacci e rullo regolabile - 3 dead bolts and adjustable roller bolt CARATTERISTICHE COSTRUTTIVE: Scatole chiuse e coperchi in acciaio zincato e plastificato - Frontale in acciaio inox - Catenacci autocentranti in lega speciale nichelata con sistema antiscasso - Rullo in ottone nichelato. FUNZIONAMENTO: Catenacci comandati dalla chiave - Rullo comandato a pressione o dalla chiave. MANO: Unica. PARTI IN DOTAZIONE: 2 borchie cod. 0120 N, 2 sottofrontali cod. 0633 N, vite cilindro, viti di fissaggio in acciaio inox, istruzioni di montaggio. CONSTRUCTIVE FEATURES: Zinc and plastic plated steel closed cases and covers - Stainless steel forend - Special nickel-plated alloy self-centering dead bolts with lockpicking system - Nickel-plated brass roller bolt. WORKING: Key driven dead bolts - Pressure or key driven roller bolt. HAND: No hand. PROVIDED WITH: 2 roses cod. 0120 N, 2 forend spacers cod. 0633 N, cylinder screw, stainless steel fixing screws, assembling instructions. COD. mandate throws 1705.25.UL 25230041 20 85 2 2,33 1 5 1705.30.UL30230046 20 85 2 2,371 5 1705.35.UL 35230051 20 85 2 2,41 1 5 1705.40.UL 40230056 20 85 2 2,45 1 5 COD. interasse 92 mm centre distance 92 mm interasse E L AM centre distance interasse E L AM centre distance mandate throws 1725.25.UL 25230041 20 92 2 2,331 5 1725.30.UL30230046 20 92 2 2,371 5 1725.35.UL 35230051 20 92 2 92 2 2,451 5 1725.40.UL 40230056 20 2,41 1 5 199 Serrature multipunto ad ingranaggi per montanti Vertical multi-point locks with gear mechanism movements 3 catenacci e scrocco regolabile - 3 dead bolts and adjustable latch bolt Scrocco intercambiabile con rullo cod. 01435 - Latch bolt interchangeable into roller bolt cod. 01435 CARATTERISTICHE COSTRUTTIVE: Scatole chiuse e coperchi in acciaio zincato e plastificato - Frontale in acciaio inox - Catenacci autocentranti in lega speciale nichelata con sistema antiscasso - Scrocco in lega speciale nichelata - Ingegno maniglia in lega speciale zincata foro mm.8. FUNZIONAMENTO: Catenacci comandati dalla chiave - Scrocco comandato dalla chiave o dalla maniglia. MANO: Reversibile. PARTI IN DOTAZIONE: 2 borchie cod. 0120 N, vite cilindro, viti di fissaggio in acciaio inox, istruzioni di montaggio. CONSTRUCTIVE FEATURES: Zinc and plastic plated steel closed cases and covers - Stainless steel forend - Special nickel-plated alloy self-centering dead bolts with lockpicking system - Special nickel-plated alloy latch bolt - Special zinc-plated alloy square spindle device mm.8. WORKING: Key driven dead bolts - Handle or key driven latch bolt. HAND: Reversible. PROVIDED WITH: 2 roses cod. 0120 N, cylinder screw, stainless steel fixing screws, assembling instructions. COD. interasse E L AM centre distance 85 2 1,91 1 5 1700.30.PC30157046 20 85 2 1,951 5 1700.35.PC 35 1570 51 85 2 85 2 2,03 1 5 COD. 200 throws 1700.25.PC25157041 20 20 1700.40.PC 40157056 20 interasse 92 mm centre distance 92 mm mandate interasse E L AM centre distance 1,99 1 5 throws 1720.25.PC25157041 20 92 2 1,911 5 1720.30.PC30157046 20 92 2 1,951 5 1720.35.PC35157051 20 92 2 1,99 1 5 1720.40.PC 40157056 20 92 2 2,031 5 Serrature multipunto ad ingranaggi per montanti Vertical multi-point locks with gear mechanism movements 3 catenacci e scrocco regolabile - 3 dead bolts and adjustable latch bolt Scrocco intercambiabile con rullo cod. 01435 - Latch bolt interchangeable into roller bolt cod. 01435 CARATTERISTICHE COSTRUTTIVE: Scatole chiuse e coperchi in acciaio zincato e plastificato - Frontale in acciaio inox - Catenacci autocentranti in lega speciale nichelata con sistema antiscasso - Scrocco in lega speciale nichelata - Ingegno maniglia in lega speciale zincata foro mm.8. FUNZIONAMENTO: Catenacci comandati dalla chiave - Scrocco comandato dalla chiave o dalla maniglia. MANO: Reversibile. PARTI IN DOTAZIONE: 2 borchie cod. 0120 N, vite cilindro, viti di fissaggio in acciaio inox, istruzioni di montaggio. CONSTRUCTIVE FEATURES: Zinc and plastic plated steel closed cases and covers - Stainless steel forend - Special nickel-plated alloy self-centering dead bolts with lockpicking system - Special nickel-plated alloy latch bolt - Special zinc-plated alloy square spindle device mm.8. WORKING: Key driven dead bolts - Handle or key driven latch bolt. HAND: Reversible. PROVIDED WITH: 2 roses cod. 0120 N, cylinder screw, stainless steel fixing screws, assembling instructions. COD. mandate throws 1700.25.PL 25230041 20 85 2 2,30 1 5 1700.30.PL30230046 20 85 2 2,341 5 1700.35.PL 35230051 20 85 2 2,38 1 5 1700.40.PL 40230056 20 85 2 2,42 1 5 COD. interasse 92 mm centre distance 92 mm interasse E L AM centre distance interasse E L AM centre distance mandate throws 1720.25.PL 25230041 20 92 2 2,301 5 1720.30.PL30230046 20 92 2 2,341 5 1720.35.PL 35230051 20 92 2 92 2 2,421 5 1720.40.PL 40230056 20 2,38 1 5 201 Serrature multipunto ad ingranaggi per montanti Vertical multi-point locks with gear mechanism movements 3 catenacci - 3 dead bolts CARATTERISTICHE COSTRUTTIVE: Scatole chiuse e coperchi in acciaio zincato e plastificato - Frontale in acciaio inox - Catenacci autocentranti in lega speciale nichelata con sistema antiscasso. FUNZIONAMENTO: Catenacci comandati dalla chiave. MANO: Unica. PARTI IN DOTAZIONE: 2 borchie cod. 0120 N, vite cilindro, viti di fissaggio in acciaio inox, istruzioni di montaggio. CONSTRUCTIVE FEATURES: Zinc and plastic plated steel closed cases and covers - Stainless steel forend - Special nickel-plated alloy self-centering dead bolts with lockpicking system. WORKING: Key driven dead bolts. HAND: No hand. PROVIDED WITH: 2 roses cod. 0120 N, cylinder screw, stainless steel fixing screws, assembling instructions. COD. interasse E L AM centre distance 85 2 1,84 1 5 1701.30.PC30157046 20 85 2 1,881 5 1701.35.PC 85 2 85 2 1,96 1 5 COD. 202 throws 1701.25.PC25157041 20 35 1570 51 20 1701.40.PC 40157056 20 interasse 92 mm centre distance 92 mm mandate interasse E L AM centre distance 1,92 1 5 mandate throws 1721.25.PC25157041 20 92 2 1,841 5 1721.30.PC30157046 20 92 2 1,881 5 1721.35.PC35157051 20 92 2 1,92 1 5 1721.40.PC 40157056 20 92 2 1,961 5 Serrature multipunto ad ingranaggi per montanti Vertical multi-point locks with gear mechanism movements 3 catenacci - 3 dead bolts CARATTERISTICHE COSTRUTTIVE: Scatole chiuse e coperchi in acciaio zincato e plastificato - Frontale in acciaio inox - Catenacci autocentranti in lega speciale nichelata con sistema antiscasso. FUNZIONAMENTO: Catenacci comandati dalla chiave. MANO: Unica. PARTI IN DOTAZIONE: 2 borchie cod. 0120 N, vite cilindro, viti di fissaggio in acciaio inox, istruzioni di montaggio. CONSTRUCTIVE FEATURES: Zinc and plastic plated steel closed cases and covers - Stainless steel forend - Special nickel-plated alloy self-centering dead bolts with lockpicking system. WORKING: Key driven dead bolts. HAND: No hand. PROVIDED WITH: 2 roses cod. 0120 N, cylinder screw, stainless steel fixing screws, assembling instructions. COD. mandate throws 1701.25.PL 25230041 20 85 2 2,23 1 5 1701.30.PL30230046 20 85 2 2,271 5 1701.35.PL 35230051 20 85 2 2,31 1 5 1701.40.PL 40230056 20 85 2 2,35 1 5 COD. interasse 92 mm centre distance 92 mm interasse E L AM centre distance interasse E L AM centre distance mandate throws 1721.25.PL 25230041 20 92 2 2,231 5 1721.30.PL30230046 20 92 2 2,271 5 1721.35.PL 35230051 20 92 2 2,31 1 5 1721.40.PL 40230056 20 92 2 2,351 5 203 Serrature multipunto ad ingranaggi per montanti Vertical multi-point locks with gear mechanism movements 3 catenacci e rullo regolabile - 3 dead bolts and adjustable roller bolt CARATTERISTICHE COSTRUTTIVE: Scatole chiuse e coperchi in acciaio zincato e plastificato - Frontale in acciaio inox - Catenacci autocentranti in lega speciale nichelata con sistema antiscasso - Rullo in ottone nichelato. FUNZIONAMENTO: Catenacci comandati dalla chiave - Rullo comandato a pressione o dalla chiave. MANO: Unica. PARTI IN DOTAZIONE: 2 borchie cod. 0120 N, vite cilindro, viti di fissaggio in acciaio inox, istruzioni di montaggio. CONSTRUCTIVE FEATURES: Zinc and plastic plated steel closed cases and covers - Stainless steel forend - Special nickel-plated alloy self-centering dead bolts with lockpicking system - Nickel-plated brass roller bolt. WORKING: Key driven dead bolts - Pressure or key driven roller bolt. HAND: No hand. PROVIDED WITH: 2 roses cod. 0120 N, cylinder screw, stainless steel fixing screws, assembling instructions. COD. interasse E L AM centre distance 85 2 1,94 1 5 1705.30.PC30157046 20 85 2 1,981 5 1705.35.PC 35 1570 51 85 2 85 2 2,06 1 5 COD. 204 throws 1705.25.PC25157041 20 20 1705.40.PC 40157056 20 interasse 92 mm centre distance 92 mm mandate interasse E L AM centre distance 2,02 1 5 mandate throws 1725.25.PC25157041 20 92 2 1,941 5 1725.30.PC30157046 20 92 2 1,981 5 1725.35.PC35157051 20 92 2 2,02 1 5 1725.40.PC 40157056 20 92 2 2,061 5 Serrature multipunto ad ingranaggi per montanti Vertical multi-point locks with gear mechanism movements 3 catenacci e rullo regolabile - 3 dead bolts and adjustable roller bolt CARATTERISTICHE COSTRUTTIVE: Scatole chiuse e coperchi in acciaio zincato e plastificato - Frontale in acciaio inox - Catenacci autocentranti in lega speciale nichelata con sistema antiscasso - Rullo in ottone nichelato. FUNZIONAMENTO: Catenacci comandati dalla chiave - Rullo comandato a pressione o dalla chiave. MANO: Unica. PARTI IN DOTAZIONE: 2 borchie cod. 0120 N, vite cilindro, viti di fissaggio in acciaio inox, istruzioni di montaggio. CONSTRUCTIVE FEATURES: Zinc and plastic plated steel closed cases and covers - Stainless steel forend - Special nickel-plated alloy self-centering dead bolts with lockpicking system - Nickel-plated brass roller bolt. WORKING: Key driven dead bolts - Pressure or key driven roller bolt. HAND: No hand. PROVIDED WITH: 2 roses cod. 0120 N, cylinder screw, stainless steel fixing screws, assembling instructions. COD. mandate throws 1705.25.PL 25230041 20 85 2 2,33 1 5 1705.30.PL30230046 20 85 2 2,371 5 1705.35.PL 35230051 20 85 2 2,41 1 5 1705.40.PL 40230056 20 85 2 2,45 1 5 COD. interasse 92 mm centre distance 92 mm interasse E L AM centre distance interasse E L AM centre distance mandate throws 1725.25.PL 25230041 20 92 2 2,331 5 1725.30.PL30230046 20 92 2 2,371 5 1725.35.PL 35230051 20 92 2 92 2 2,451 5 1725.40.PL 40230056 20 2,41 1 5 205 206 Blocchetti di chiusura Dead bolt rim locks CARATTERISTICHE COSTRUTTIVE: Scatola in lega speciale verniciata nera - Coperchio in acciaio nichelato - Catenaccio in ottone nichelato. COD. mandate throws FUNZIONAMENTO: Catenaccio comandato dalla chiave. MANO: Unica. 210 103/04 1 0,14 10 - PARTI IN DOTAZIONE: 3 chiavi, viti di fissaggio in acciaio zincato, contropiastra in acciaio nichelato con spessori e viti di fissaggio. CONSTRUCTIVE FEATURES: Black painted special alloy case Nickel-plated steel cover - Nickel-plated brass dead bolt. WORKING: Key driven dead bolt. HAND: No hand. PROVIDED WITH: 3 keys, zinc-plated fixing screws, nickel-plated steel striking plate with spacers and fixing screws. CARATTERISTICHE COSTRUTTIVE: Scatola in acciaio verniciato mandate nero - Coperchio in acciaio zincato - Catenaccio in acciaio zincato. COD. throws FUNZIONAMENTO: Catenaccio comandato dalla chiave. MANO: Unica. 4220 4101 1 0,30 10 - PARTI IN DOTAZIONE: 3 chiavi, contropiastra in acciaio verniciato nero con spessori. CONSTRUCTIVE FEATURES: Black painted steel case - Zinc-plated steel cover - Zinc-plated steel dead bolt. WORKING: Key driven dead bolt. HAND: No hand. PROVIDED WITH: 3 keys, black painted steel striking plate with spacers. No impianti speciali - No special keying systems 208 SERRATURE PER PROFILI IN FERRO LOCKS FOR IRON PROFILES Pag. 211 - SERRATURE A DOPPIA MAPPA PER FASCE - DOUBLE-bit key locks -serrature di sicurezza per montanti -serrature multipunto per montanti - vertical security locks - vertical multi-point locks Pag. 213 Pag. 221 209 210 Serrature a doppia mappa per fasce Horizontal double-bit key locks Scrocco intercambiabile - Interchangeable latch bolt Attacco M8 M8 device Scrocco regolabile ~ 5 mm Adjustable latch bolt ~ 5 mm Tappo cod. 05931 Plug cod. 05931 COD. Per serrature serie cod. cod. For locks series cod. 05931 5970 EM8 tappo - plug 211 Serrature a doppia mappa per fasce Horizontal double-bit key locks Catenaccio e scrocco regolabile 3 punti di chiusura Scrocco intercambiabile con rullo cod. 05935 Con attacchi M8 - Provided with M8 devices Dead and adjustable latch bolt 3 locking points Latch bolt interchangeable into roller bolt cod. 05935 CARATTERISTICHE COSTRUTTIVE: Scatola e coperchio in acciaio zincato e plastificato - Frontale in acciaio inox - Catenaccio in COD. EF AM acciaio nichelato - Scrocco in lega speciale nichelata - Ingegno mm.8. maniglia in acciaio brunito foro FUNZIONAMENTO: Catenaccio comandato dalla chiave - Scrocco 5970 EM8 90 2518637 5100/06 comandato dalla chiave o dalla maniglia. MANO: Reversibile. PARTI IN DOTAZIONE: 2 chiavi, 2 borchie cod. 0590 A. CONFEZIONAMENTO: Imballo singolo in cellophane. mandate throws 4 1,2520 - CONSTRUCTIVE FEATURES: Zinc and plastic plated steel case and cover - Stainless steel forend - Nickel-plated steel dead bolt - Nichel-plated special alloy latch bolt - Burnished steel square spindle device mm.8. WORKING: Key driven dead bolt - Handle or key driven latch bolt. HAND: Reversible. PROVIDED WITH: 2 keys, 2 escutcheons cod. 0590 A. PACKAGING: Single cellophane pack. Catenaccio 3 punti di chiusura Con attacchi M8 - Dead bolt 3 locking points Provided with M8 devices CARATTERISTICHE COSTRUTTIVE: Scatola e coperchio in acciaio zincato e plastificato - Frontale in acciaio inox - Catenaccio in COD. EF AM acciaio nichelato. FUNZIONAMENTO: Catenaccio comandato dalla chiave. 5971 EM8 90 2518637 5100/06 MANO: Unica. PARTI IN DOTAZIONE: 2 chiavi, 2 borchie cod. 0590 A. CONFEZIONAMENTO: Imballo singolo in cellophane. CONSTRUCTIVE FEATURES: Zinc and plastic plated steel case and cover - Stainless steel forend - Nickel-plated steel dead bolt. WORKING: Key driven dead bolt. HAND: No hand. PROVIDED WITH: 2 keys, 2 escutcheons cod. 0590 A. PACKAGING: Single cellophane pack. 212 mandate throws 4 1,0520 - Serrature di sicurezza per montanti Vertical security locks Scrocco intercambiabile - Interchangeable latch bolt Frontale in acciaio inox Stainless steel forend Attacco M8 M8 device Corsa 25 mm Rod projection 25 mm Scatola chiusa Sealed lock case Movimento dei catenacci laterali con meccanismo ad ingranaggi Lateral dead bolts gear mechanism movement Scrocco regolabile ~ 5 mm Adjustable latch bolt ~ 5 mm Rullo cod. 01435 Roller bolt cod. 01435 Sistema antiscasso brevettato Patented lock-picking system Tappo cod. 01431 Montaggio cilindro a spillo Plug cod. 01431 Cross key cylinder assembly Catenaccio autocentrante Self-centering dead bolt Corsa 25 mm Rod projection 25 mm Attacco M8 M8 device Il movimento maggiorato dei catenacci laterali permette un migliore inserimento dei puntali delle aste nel telaio del serramento, assicurando l’efficacia delle chiusure alto e basso. Longer rod projection allows a better fitting of dead bolts in the profiles, ensuring a safer and more effective locking. COD. Per serrature serie cod. Cilindro a spillo cod. Per serrature serie cod. Cod. For locks series cod. Cross key cylinder cod. For locks series cod. 01431 1490 - 4490 4052 1490 - 1491 - 1492 - 1495 - 1496 4490 - 4491 - 4492 - 4495 - 4496 tappo - plug 4052/1 01435 con chiavi lunghe rullo - roller bolt long keys 213 Serrature di sicurezza per montanti Vertical security locks Catenaccio e scrocco regolabile 3 punti di chiusura Scrocco intercambiabile con rullo cod. 01435 Con attacchi M8 - Provided with M8 devices Dead and adjustable latch bolt 3 locking points Latch bolt interchangeable into roller bolt cod. 01435 CARATTERISTICHE COSTRUTTIVE: Scatola e coperchio in acciaio zincato e plastificato - Frontale in acciaio inox - Catenaccio COD. autocentrante in lega speciale nichelata con sistema antiscasso - Scrocco in lega speciale nichelata - Ingegno maniglia in lega speciale zincata foro mm.8. 1490.25.25.M8.E FUNZIONAMENTO: Catenaccio comandato dalla chiave - Scrocco 1490.30.25.M8.E comandato dalla chiave o dalla maniglia. MANO: Reversibile. 1490.35.25.M8.E PARTI IN DOTAZIONE: 1 borchia cod. 0120 N, vite cilindro. CONFEZIONAMENTO: Imballo singolo in cellophane. NEW corsa 25 mm rod projection 25 mm mandate E F A M 25 25 40 24 1 0,64 30 - 30 25 45 24 1 0,66 30 - 35 25 50 24 1 0,69 30 - throws CONSTRUCTIVE FEATURES: Zinc and plastic plated steel case and cover - Stainless steel forend - Nickel-plated special alloy self-centering dead bolt with lock-picking system - Nichel-plated special alloy latch bolt - Zinc-plated special alloy square spindle device mm.8. WORKING: Key driven dead bolt - Handle or key driven latch bolt. HAND: Reversible. PROVIDED WITH: 1 rose cod. 0120 N, cylinder screw. PACKAGING: Single cellophane pack. Catenaccio 3 punti di chiusura Con attacchi M8 - Dead bolt 3 locking points CARATTERISTICHE COSTRUTTIVE: Scatola e coperchio in acciaio zincato e plastificato - Frontale in acciaio inox - Catenaccio COD. autocentrante in lega speciale nichelata con sistema antiscasso. FUNZIONAMENTO: Catenaccio comandato dalla chiave. 1491.25.25.M8.E MANO: Unica. PARTI IN DOTAZIONE: 1 borchia cod. 0120 N, vite cilindro. 1491.30.25.M8.E CONFEZIONAMENTO: Imballo singolo in cellophane. 1491.35.25.M8.E CONSTRUCTIVE FEATURES: Zinc and plastic plated steel case and cover - Stainless steel forend - Nickel-plated special alloy selfcentering dead bolt with lock-picking system. WORKING: Key driven dead bolt. HAND: No hand. PROVIDED WITH: 1 rose cod. 0120 N, cylinder screw. PACKAGING: Single cellophane pack. 214 NEW corsa 25 mm rod projection 25 mm Provided with M8 devices mandate E F A M 25 25 40 24 1 0,58 30 - 30 25 45 24 1 0,60 30 - 35 25 50 24 1 0,63 30 - throws Serrature di sicurezza per montanti Vertical security locks Catenaccio con maniglia 3 punti di chiusura Con attacchi M8 - Dead bolt with handle 3 locking points Provided with M8 devices CARATTERISTICHE COSTRUTTIVE: Scatola e coperchio in acciaio zincato e plastificato - Frontale in acciaio inox - Catenaccio COD. autocentrante in lega speciale nichelata con sistema antiscasso Ingegno maniglia in lega speciale zincata foro mm.8. FUNZIONAMENTO: Catenaccio comandato dalla maniglia - Blocco 1491Q.25.25.M8.E maniglia comandato dalla chiave. 1491Q.30.25.M8.E MANO: Unica. PARTI IN DOTAZIONE: 1 borchia cod. 0120 N, vite cilindro. 1491Q.35.25.M8.E CONFEZIONAMENTO: Imballo singolo in cellophane. NEW corsa 25 mm rod projection 25 mm mandate E F A M 25 25 40 24 1 0,68 30 - 30 25 45 24 1 0,71 30 - 35 25 50 24 1 0,74 30 - throws CONSTRUCTIVE FEATURES: Zinc and plastic plated steel case and cover - Stainless steel forend - Nickel-plated special alloy selfcentering dead bolt with lock-picking system - Zinc-plated special alloy square spindle device mm.8. WORKING: Handle driven dead bolt - Key driven handle interlock. HAND: No hand. PROVIDED WITH: 1 rose cod. 0120 N, cylinder screw. PACKAGING: Single cellophane pack. Catenaccio e rullo regolabile 3 punti di chiusura Con attacchi M8 - Dead and adjustable roller bolt 3 locking points NEW Provided with M8 devices CARATTERISTICHE COSTRUTTIVE: Scatola e coperchio in acciaio zincato e plastificato - Frontale in acciaio inox - Catenaccio autocentrante in lega speciale nichelata con sistema antiscasso Rullo in ottone nichelato. FUNZIONAMENTO: Catenaccio comandato dalla chiave-Rullo comandato a pressione o dalla chiave. MANO: Unica. PARTI IN DOTAZIONE: 1 borchia cod. 0120 N, vite cilindro. CONFEZIONAMENTO: Imballo singolo in cellophane. NEW corsa 25 mm rod projection 25 mm COD. mandate E F A M throws 1495.25.25.M8.E 25 25 40 24 1 0,64 30 - 1495.30.25.M8.E 30 25 45 24 1 0,66 30 - 1495.35.25.M8.E 35 25 50 24 1 0,69 30 - CONSTRUCTIVE FEATURES: Zinc and plastic plated steel case and cover - Stainless steel forend - Nickel-plated special alloy self-centering dead bolt with lock-picking system - Nichel-plated brass roller bolt. WORKING: Key driven dead bolt - Pressure or key driven roller bolt. HAND: No hand. PROVIDED WITH: 1 rose cod. 0120 N, cylinder screw. PACKAGING: Single cellophane pack. 215 Serrature di sicurezza per montanti Vertical security locks Gancio 3 punti di chiusura Con attacchi M8 - Hook bolt 3 locking points NEW NEW corsa 25 mm rod projection 25 mm Provided with M8 devices CARATTERISTICHE COSTRUTTIVE: Scatola e coperchio in acciaio zincato e plastificato - Frontale in acciaio inox - Gancio in acciaio nichelato. FUNZIONAMENTO: Gancio comandato dalla chiave. MANO: Unica. PARTI IN DOTAZIONE: 1 borchia cod. 0120 N, vite cilindro. CONFEZIONAMENTO: Imballo singolo in cellophane. COD. mandate E F A throws 1496.25.25.M8.E 25 25 40 1 0,61 30 - 1496.30.25.M8.E 30 25 45 1 0,64 30 - 1496.35.25.M8.E 35 25 50 1 0,65 30 - CONSTRUCTIVE FEATURES: Zinc and plastic plated steel case and cover - Stainless steel forend - Nickel-plated steel hook bolt. WORKING: Key driven hook bolt. HAND: No hand. PROVIDED WITH: 1 rose cod. 0120 N, cylinder screw. PACKAGING: Single cellophane pack. Alto e basso 2 punti di chiusura Con attacchi M8 - Top and bottom 2 locking points CARATTERISTICHE COSTRUTTIVE: Scatola e coperchio in acciaio zincato e plastificato - Frontale in acciaio inox. COD. FUNZIONAMENTO: Aste verticali comandate dalla chiave. MANO: Unica. 1492.25.25.M8.E PARTI IN DOTAZIONE: 1 borchia cod. 0120 N, vite cilindro. CONFEZIONAMENTO: Imballo singolo in cellophane. 1492.30.25.M8.E CONSTRUCTIVE FEATURES: Zinc and plastic plated steel case and 1492.35.25.M8.E cover - Stainless steel forend. WORKING: Key driven vertical rods. HAND: No hand. PROVIDED WITH: 1 rose cod. 0120 N, cylinder screw. PACKAGING: Single cellophane pack. 216 NEW corsa 25 mm rod projection 25 mm Provided with M8 devices mandate E F A throws 25 25 40 1 0,58 30 - 30 25 45 1 0,60 30 - 35 25 50 1 0,63 30 - Serrature di sicurezza per montanti Vertical security locks Catenaccio e scrocco regolabile 3 punti di chiusura Scrocco intercambiabile con rullo cod. 01435 Con attacchi M8 - Provided with M8 devices CARATTERISTICHE COSTRUTTIVE: Scatola e coperchio in acciaio zincato e plastificato - Frontale in acciaio inox - Catenaccio autocentrante in lega speciale nichelata con sistema antiscasso - Scrocco in lega speciale nichelata - Ingegno maniglia in lega speciale zincata foro mm.8 - Cilindro a spillo cod. 4052. FUNZIONAMENTO: Catenaccio comandato dalla chiave - Scrocco comandato dalla chiave o dalla maniglia. MANO: Reversibile. PARTI IN DOTAZIONE: 3 chiavi, 2 borchie cod. 0441 N. CONFEZIONAMENTO: Imballo singolo in cellophane. Dead and adjustable latch bolt 3 locking points Latch bolt interchangeable into roller bolt cod. 01435 COD. NEW corsa 25 mm rod projection 25 mm mandate EF AM throws 4490.25.25.M8.E25 25 40 24 4100 1 0,7230 - 4490.30.25.M8.E30 25 45 24 4100 1 0,7430 - 4490.35.25.M8.E35 25 50 24 4100 1 0,7730 - CONSTRUCTIVE FEATURES: Zinc and plastic plated steel case and cover - Stainless steel forend - Nickel-plated special alloy self-centering dead bolt with lock-picking system - Nichel-plated special alloy latch bolt - Zinc-plated special alloy square spindle device mm.8 - Cross cylinder cod.4052. WORKING: Key driven dead bolt - Handle or key driven latch bolt. HAND: Reversible. PROVIDED WITH: 3 keys, 2 roses cod. 0441 N. PACKAGING: Single cellophane pack. Catenaccio 3 punti di chiusura Con attacchi M8 - Dead bolt 3 locking points Provided with M8 devices NEW corsa 25 mm rod projection 25 mm CARATTERISTICHE COSTRUTTIVE: Scatola e coperchio in acciaio mandate zincato e plastificato - Frontale in acciaio inox - Catenaccio COD. EF AM autocentrante in lega speciale nichelata con sistema antiscasso throws Cilindro a spillo cod. 4052. FUNZIONAMENTO: Catenaccio comandato dalla chiave. 4491.25.25.M8.E25 25 40 24 4100 1 0,6630 MANO: Unica. PARTI IN DOTAZIONE: 3 chiavi, 2 borchie cod. 0441 N. 4491.30.25.M8.E30 25 45 24 4100 1 0,6830 CONFEZIONAMENTO: Imballo singolo in cellophane. CONSTRUCTIVE FEATURES: Zinc and plastic plated steel case 4491.35.25.M8.E35 25 50 24 and cover - Stainless steel forend - Nickel-plated special alloy self-centering dead bolt with lock-picking system - Cross cylinder cod.4052. WORKING: Key driven dead bolt. HAND: No hand PROVIDED WITH: 3 keys, 2 roses cod. 0441 N. PACKAGING: Single cellophane pack. 4100 1 0,7130 - 217 Serrature di sicurezza per montanti Vertical security locks Catenaccio con maniglia 3 punti di chiusura Con attacchi M8 - Dead bolt with handle 3 locking points Provided with M8 devices CARATTERISTICHE COSTRUTTIVE: Scatola e coperchio in acciaio zincato e plastificato - Frontale in acciaio inox - Catenaccio autocentrante in lega speciale nichelata con sistema antiscasso - Ingegno maniglia in lega speciale zincata foro mm.8 - Cilindro a spillo cod. 4052. FUNZIONAMENTO: Catenaccio comandato dalla maniglia - Blocco maniglia comandato dalla chiave. MANO: Unica. PARTI IN DOTAZIONE: 3 chiavi, 2 borchie cod. 0441 N. CONFEZIONAMENTO: Imballo singolo in cellophane. COD. NEW corsa 25 mm rod projection 25 mm mandate EF AM throws 4491Q.25.25.M8.E25 25 40 24 4100 1 0,76 30 - 4491Q.30.25.M8.E30 25 45 24 4100 1 0,79 30 - 4491Q.35.25.M8.E35 25 50 24 4100 1 0,82 30 - CONSTRUCTIVE FEATURES: Zinc and plastic plated steel case and cover - Stainless steel forend - Nickel-plated special alloy selfcentering dead bolt with lock-picking system - Zinc-plated special alloy square spindle device mm.8 - Cross cylinder cod.4052. WORKING: Handle driven dead bolt - Key driven handle interlock. HAND: No hand. PROVIDED WITH: 3 keys, 2 roses cod. 0441 N. PACKAGING: Single cellophane pack. Catenaccio e rullo regolabile 3 punti di chiusura Con attacchi M8 - CARATTERISTICHE COSTRUTTIVE: Scatola e coperchio in acciaio zincato e plastificato - Frontale in acciaio inox - Catenaccio autocentrante in lega speciale nichelata con sistema antiscasso - Rullo in ottone nichelato - Cilindro a spillo cod. 4052 o 4052/1 (con chiavi lunghe). FUNZIONAMENTO: Catenaccio comandato dalla chiave-Rullo comandato a pressione o dalla chiave. MANO: Unica. PARTI IN DOTAZIONE: 3 chiavi, 2 borchie cod. 0441 N. CONFEZIONAMENTO: Imballo singolo in cellophane. CONSTRUCTIVE FEATURES: Zinc and plastic plated steel case and cover - Stainless steel forend - Nickel-plated special alloy selfcentering dead bolt with lock-picking system - Nichel-plated brass roller bolt - Cross cylinder cod. 4052 or 4052/1 (with long keys). WORKING: Key driven dead bolt - Pressure or key driven roller bolt. HAND: No hand. PROVIDED WITH: 3 keys, 2 roses cod. 0441 N. PACKAGING: Single cellophane pack. 218 Dead and adjustable roller bolt 3 locking points NEW Provided with M8 devices NEW corsa 25 mm rod projection 25 mm COD. mandate EF AM throws 4495.25.25.M8.E25 25 40 24 4100 1 0,7230 - 4495.30.25.M8.E30 25 45 24 4100 1 0,7430 - 4495.35.25.M8.E35 25 50 24 4100 1 0,7730 - Serrature di sicurezza per montanti Vertical security locks Gancio 3 punti di chiusura Con attacchi M8 - Hook bolt 3 locking points Provided with M8 devices NEW corsa 25 mm rod projection 25 mm CARATTERISTICHE COSTRUTTIVE: Scatola e coperchio in acciaio mandate zincato e plastificato - Frontale in acciaio inox - Gancio in acciaio COD. EF A throws nichelato - Cilindro a spillo cod. 4052. FUNZIONAMENTO: Gancio comandato dalla chiave. 4496.25.25.M8.E25 25 40 4100 1 0,6930 MANO: Unica. PARTI IN DOTAZIONE: 3 chiavi, 2 borchie cod. 0441 N. 4496.30.25.M8.E30 25 45 4100 1 0,7230 CONFEZIONAMENTO: Imballo singolo in cellophane. CONSTRUCTIVE FEATURES: Zinc and plastic plated steel case and cover - Stainless steel forend - Nickel-plated steel hook bolt - Cross cylinder cod.4052. WORKING: Key driven hook bolt. HAND: No hand. PROVIDED WITH: 3 keys, 2 roses cod. 0441 N. PACKAGING: Single cellophane pack. Alto e basso 2 punti di chiusura Con attacchi M8 - 4496.35.25.M8.E35 25 50 Top and bottom 2 locking points Provided with M8 devices 4100 1 0,7330 - NEW corsa 25 mm rod projection 25 mm CARATTERISTICHE COSTRUTTIVE: Scatola e coperchio in acciaio mandate zincato e plastificato - Frontale in acciaio inox - Cilindro a spillo COD. EF A throws cod. 4052. FUNZIONAMENTO: Aste verticali comandate dalla chiave. 4492.25.25.M8.E25 25 40 4100 1 0,6630 MANO: Unica. PARTI IN DOTAZIONE: 3 chiavi, 2 borchie cod. 0441 N. 4492.30.25.M8.E30 25 45 4100 1 0,6830 CONFEZIONAMENTO: Imballo singolo in cellophane. 4492.35.25.M8.E35 25 50 4100 1 0,7130 - CONSTRUCTIVE FEATURES: Zinc and plastic plated steel case and cover - Stainless steel forend - Cross cylinder cod.4052. WORKING: Key driven vertical rods. HAND: No hand. PROVIDED WITH: 3 keys, 2 roses cod. 0441 N. PACKAGING: Single cellophane pack. 219 220 Serrature multipunto per montanti Vertical multi-point locks Scrocco intercambiabile - Interchangeable latch bolt Attacco M8 M8 device Frontale in acciaio inox Stainless steel forend Montaggio cilindro a spillo Cross key cylinder assembly Scrocco regolabile ~ 5 mm Adjustable latch bolt ~ 5 mm Sistema antiscasso brevettato Patented lock-picking system Tappo cod. 01431 Plug cod. 01431 Catenaccio autocentrante Self-centering dead bolt Cilindro a spillo cod. Per serrature serie cod. Cross key cylinder cod. For locks series cod. 4052 11061/5 - 11071/5 - 11081/5 - 1161/2 - 1171/2 4052/1 Attacco M8 M8 device con chiavi lunghe - 1181/2 - 1260/5 - 1261/5 - 1270/5 - 1271/5 1280/5 - 1281/5 - 1531 long keys 221 Serrature multipunto per montanti Vertical multi-point locks 2 catenacci - 2 dead bolts NEW CARATTERISTICHE COSTRUTTIVE: Scatole e coperchi in acciaio zincato e plastificato - Frontale in acciaio inox - Catenacci autocentranti in acciaio nichelato con sistema antiscasso. FUNZIONAMENTO: Catenacci comandati dalla chiave. MANO: Unica. PARTI IN DOTAZIONE: 2 borchie cod. 0120 N, 2 sottofrontali cod. 0633 N, vite cilindro, viti di fissaggio in acciaio inox. CONSTRUCTIVE FEATURES: Zinc and plastic plated steel cases and covers - Stainless steel forend - Nickel-plated steel self-centering dead bolts with lock-picking system. WORKING: Key driven dead bolts. HAND: No hand. PROVIDED WITH: 2 roses cod. 0120 N, 2 forend spacers cod. 0633 N, cylinder screw, stainless steel fixing screws. COD. 222 E L A M mandate throws 1161/2 25100040 24 1 1,10 5 - 1171/2 30100045 24 1 1,13 5 - 1181/2 35100050 24 1 1,16 5 - Serrature multipunto per montanti Vertical multi-point locks 2 catenacci 4 punti di chiusura Con attacchi M8 - 2 dead bolts 4 locking points NEW Provided with M8 devices CARATTERISTICHE COSTRUTTIVE: Scatole e coperchi in acciaio zincato e plastificato - Frontale in acciaio inox - Catenacci autocentranti in acciaio nichelato con sistema antiscasso. FUNZIONAMENTO: Catenacci comandati dalla chiave. MANO: Unica. PARTI IN DOTAZIONE: 2 borchie cod. 0120 N, 2 sottofrontali cod. 0633 N, vite cilindro, viti di fissaggio in acciaio inox. CONSTRUCTIVE FEATURES: Zinc and plastic plated steel cases and covers - Stainless steel forend - Nickel-plated steel self-centering dead bolts with lock-picking system. WORKING: Key driven dead bolts. HAND: No hand. PROVIDED WITH: 2 roses cod. 0120 N, 2 forend spacers cod. 0633 N, cylinder screw, stainless steel fixing screws. COD. E L A M mandate throws 1531.25.UC M8 25100040 24 1 1,16 5 - 1531.30.UC M8 30100045 24 1 1,19 5 - 1531.35.UC M8 35100050 24 1 1,22 5 - 223 Serrature multipunto per montanti Vertical multi-point locks 3 catenacci 5 punti di chiusura Con attacchi M8 - 3 dead bolts 5 locking points NEW Provided with M8 devices CARATTERISTICHE COSTRUTTIVE: Scatole e coperchi in acciaio zincato e plastificato - Frontale in acciaio inox - Catenacci autocentranti in acciaio nichelato con sistema antiscasso. FUNZIONAMENTO: Catenacci comandati dalla chiave. MANO: Unica. PARTI IN DOTAZIONE: 2 borchie cod. 0120 N, 2 sottofrontali cod. 0633 N, vite cilindro, viti di fissaggio in acciaio inox. CONSTRUCTIVE FEATURES: Zinc and plastic plated steel cases and covers - Stainless steel forend - Nickel-plated steel self-centering dead bolts with lock-picking system. WORKING: Key driven dead bolts. HAND: No hand. PROVIDED WITH: 2 roses cod. 0120 N, 2 forend spacers cod. 0633 N, cylinder screw, stainless steel fixing screws. COD. 224 E L A M mandate throws 11061/5 M8 25157040 24 1 1,94 5 - 11071/5 M8 30157045 24 1 1,97 5 - 11081/5 M8 35157050 24 1 2,00 5 - Serrature multipunto per montanti Vertical multi-point locks 3 catenacci e scrocco regolabile 5 punti di chiusura NEW 3 dead bolts and adjustable latch bolt 5 locking points Con attacchi M8 - Provided with M8 devices CARATTERISTICHE COSTRUTTIVE: Scatole e coperchi in acciaio zincato e plastificato - Frontale in acciaio inox - Catenacci autocentranti in acciaio nichelato con sistema antiscasso - Scrocco in lega speciale nichelata - Ingegno maniglia in lega speciale mm.8. zincata foro FUNZIONAMENTO: Catenacci comandati dalla chiave - Scrocco comandato dalla chiave o dalla maniglia. MANO: Reversibile. PARTI IN DOTAZIONE: 2 borchie cod. 0120 N, 2 sottofrontali cod. 0633 N, vite cilindro, viti di fissaggio in acciaio inox. CONSTRUCTIVE FEATURES: Zinc and plastic plated steel cases and covers - Stainless steel forend - Nickel-plated steel self-centering dead bolts with lock-picking system Special nichel-plated alloy latch bolt - Special zinc-plated alloy square spindle device mm.8. WORKING: Key driven dead bolts - Handle or key driven latch bolt. HAND: Reversible. PROVIDED WITH: 2 roses cod. 0120 N, 2 forend spacers cod. 0633 N, cylinder screw, stainless steel fixing screws. COD. E L A M mandate throws 1260/5 M8 25230040 24 1 2,34 1 5 1270/5 M8 30230045 24 1 2,37 1 5 1280/5 M8 35230050 24 1 2,40 1 5 225 Serrature multipunto per montanti Vertical multi-point locks 3 catenacci 5 punti di chiusura Con attacchi M8 - 3 dead bolts 5 locking points NEW Provided with M8 devices CARATTERISTICHE COSTRUTTIVE: Scatole e coperchi in acciaio zincato e plastificato - Frontale in acciaio inox - Catenacci autocentranti in acciaio nichelato con sistema antiscasso. FUNZIONAMENTO: Catenacci comandati dalla chiave. MANO: Unica. PARTI IN DOTAZIONE: 2 borchie cod. 0120 N, 2 sottofrontali cod. 0633 N, vite cilindro, viti di fissaggio in acciaio inox. CONSTRUCTIVE FEATURES: Zinc and plastic plated steel cases and covers - Stainless steel forend - Nickel-plated steel self-centering dead bolts with lock-picking system. WORKING: Key driven dead bolts. HAND: No hand. PROVIDED WITH: 2 roses cod. 0120 N, 2 forend spacers cod. 0633 N, cylinder screw, stainless steel fixing screws. COD. 226 E L A M mandate throws 1261/5 M8 25230040 24 1 2,27 1 5 1271/5 M8 30230045 24 1 2,30 1 5 1281/5 M8 35230050 24 1 2,33 1 5 ACCESSORI ACCESSORIES - BORCHIE Pag. 229 - ROSES - ACCESSORI PER ELETTROSERRATURE - ACCESSORIES FOR ELECTRIC LOCKS - ACCESSORI PER CHIUSURE SUPPLEMENTARI - ACCESSORI VARI - SOTTOFRONTALI - SUNDRY ACCESSORIES - FOREND SPACERS - ACCESSORIES FOR ADDITIONAL LOCKING POINTS Pag. 230 Pag. 231 Pag. 233 Pag. 235 227 228 Borchie Roses Borchia Coppia borchie guida chiave (con viti) Rose Pair of key guide escutcheon (with screws) Per cilindri ovali For oval cylinders COD. 0140 N Materiale - Material Nylon nero - Black nylon Per serrature a doppia mappa For double-bit key locks COD. 0,002100 - 0590 N 0,04010 - Key guide escutcheon Rose Per cilindri sagomati For profile cylinders 0120 N Nylon nero - Black nylon Borchia guida chiave Borchia COD. Materiale - Material Materiale - Material Nylon nero - Black nylon Per serrature a doppia mappa For double-bit key locks COD. 0,004100 - 0590 A Materiale - Material Acciaio zincato - Zinc-plated steel 0,04050 - Borchia guida chiave (con viti) Key guide escutcheon (with screws) Per serrature con cilindro a spillo For cross key locks COD. 0440 N Materiale - Material Nylon nero - Black nylon 0,01050 - Borchia guida chiave Key guide rose Per serrature con cilindro a spillo For cross key locks COD. 0441 N Materiale - Material Nylon nero - Black nylon 0,001100 - 229 Accessori per elettroserrature Accessories for electric locks Coppia contatti (con spessori) Gruppo bobine Pair of contacts (with spacers) Coil set Per elettroserrature serie For electric locks series cod. 388-399-788-799-888-899-999 Per elettroserrature For electric locks COD. Caratteristiche elettriche COD. Electrical features 050 12V - 1,5 A 0,03010 - Pulsante meccanico di apertura (con viti) Mechanical push-button (with screws) 034 Materiale - Material 058 Nylon Pulsante meccanico di apertura con fermo a giorno (con viti) Mechanical push-button with hold open device (with screws) Materiale - Material 059 Nylon 037 Gruppo bobine 230 Electrical features 12V - 10W a.c. / d. c. 0,02110 - Coil set Per elettroserrature serie For electric locks series cod.1168-1178-1188-1268-12781288-1438-1439-1448-1449-14581459-1468-1478-1488-1568-15781588-1668-1678-1688-4438-44394448-4449-4458-4459-4468-44784488 038 Caratteristiche elettriche Electrical features 12V - 10W a.c. / d. c. 0,02110 - Coil set Per elettroserrature serie For electric locks series c o d . 111 4 8 - 111 7 8 - 1 9 4 8 - 1 9 7 8 41148-41178-4948-4978-59385948-5968-5978 Per elettroserrature serie For electric locks series cod. 1777-377-378-777-778-877-878 033 Caratteristiche elettriche Bobina Coil set COD. 0,03010 - Bobina COD. 0,03010 - Per elettroserrature serie For electric locks series cod.1167-1177-1187-1267-12771287-1437-14379-1447-144791457-14579-1467-1477-1487-15671577-1587-1667-1677-1687-443744379-4447-44479-4457-445794467-4477-4487 Per elettroserrature predisposte For predisposed electric locks COD. 12V - 15W a.c. Coil set COD. 0,03010 - Electrical features Bobina Per elettroserrature predisposte For predisposed electric locks COD. Caratteristiche elettriche Caratteristiche elettriche 048 Electrical features 12V - 15W a.c. 0,03110 - Caratteristiche elettriche Electrical features Accessori per chiusure supplementari Accessories for additional locking points Asta interna Prolunga Internal rod Pin joint Per kits serie For kits series cod. 0670-0690 Per kit serie - For kit series cod. 0670 COD. AST001 Materiale - Material Acciaio zincato - Zinc-plated steel COD. 0,19610 - Asta interna PRS070 Materiale - Material Acciaio zincato - Zinc-plated steel Puntale antisega Internal rod Steel-saw resistant tip Per kits serie For kits series cod. 0670-0690 Per kits serie - For kits series cod. 0680-0690-0780 COD. AST002 Materiale - Material Acciaio zincato - Zinc-plated steel COD. 0,10010 - PRS071 Per kits serie For kits series cod. 0670-0680-0690-0780 Per kits serie - For kits series cod. 0681-0691-0781 Materiale - Material Acciaio zincato - Zinc-plated steel COD. 0,12610 - Piastrina di collegamento ANY031 0,00350 - Per kits serie For kits series cod. 0670-0690 Materiale - Material Acciaio zincato - Zinc-plated steel Nylon nero - Black nylon Bushing Per kits serie - For kits series cod. 0671-0682-0691-0692-0782 PSR028 Materiale - Material Boccola Connecting plate COD. 0,02750 - Rod guide External rod AST003 Materiale - Material Acciaio cementato e zincato Hardened and zinc-plated steel Pinza guida asta Asta esterna COD. 0,01050 - COD. 0,16050 - ANY032 Materiale - Material Nylon nero - Black nylon 0,001100 - 231 Accessori per chiusure supplementari Accessories for additional locking points Deviatore basculante per 5 punti di chiusura Boccola 5 locking points tipping deviator Bushing Per kits serie For kits series cod. 0670-0690 COD. ANY033 Materiale - Material Nylon nero - Black nylon 0,001100 - Boccola antipolvere a pavimento Sprung dust floor striker Per kits serie For kits series cod. 0670-0671-0674-0690-06910692-0694-0699 Per kits serie - For kits series cod. 0690-0691-0692-0694-0699 COD. COD. 0630 T Materiale - Material Ottone - Brass 0662 0,02010 - 0662/F22 F AM 25 3724 0,3502 - 22 3724 0,3302 - Deviatore basculante per 3 punti di chiusura Deviatore avanzante per 3/5 punti di chiusura Per kits serie - For kits series cod. 0680-0681-0682-0684-0689 Per kits serie - For kits series cod. 0780-0781-0782-0784-0789 3 locking points tipping deviator COD. 0661 0661/F22 232 F AM 3/5 locking points advancing deviator COD. 25 3724 0,3402 - 22 3724 0,3202 - 0761 0761/F22 NEW F AM 25 4120 0,3002 - 22 4120 0,2802 - Accessori vari Sundry accessories Scrocco intercambiabile Scrocco intercambiabile Interchangeable latch bolt Interchangeable latch bolt Per serrature serie For locks series cod. 338-358-4338-4530-530-540 COD. 0370 Materiale - Material Lega speciale nichelata - Special nickel-plated alloy0,018 10 COD. - Scrocco intercambiabile 01430 Materiale - Material Lega speciale nichelata - Special nickel-plated alloy0,058 10 COD. - 0371 0,00210 - Per serrature serie For locks series cod. 11140-11170-1940-197041140-41170-4940-4970-59305940-5960-5970 Materiale - Material Lega speciale nichelata - Special nickel-plated alloy0,037 10 COD. - Scrocco intercambiabile 05931 Materiale - Material Nylon grigio - Grey nylon 0,00210 - Tappo Interchangeable latch bolt Plug Per serrature serie For locks series cod. 1160-1170-1180-1260-1270-12801430-1440-1450-1460-1470-1480-14901560-1570-1580-1600-1610-1620-16301660-1670-1680-1700-1720-4430-44404450-4460-4470-4480-4490 Per serrature serie For locks series cod. 11140-11170-1940-1970-4114041170-4940-4970-5930-5940-59605970 05930 Nylon grigio - Grey nylon Plug Per serrature serie For locks series cod. 390-790-890-990 COD. Materiale - Material Tappo Interchangeable latch bolt 0390 - Per serrature serie For locks series cod. 371-771-871 Scrocco intercambiabile COD. Lega speciale nichelata - Special nickel-plated alloy0,024 10 Plug Per serrature serie For locks series cod. 380-780-880-1780 0380 Materiale - Material Tappo Interchangeable latch bolt COD. Per serrature serie For locks series cod. 100030-100040-100050-100060100130-100140-100150-100160-11601167-1170-1177-1180-1187-1260-12671270-1277-1280-1287-1430-1437-143791440-1447-14479-1450-1457-145791460-1467-1470-1477-1480-1487-14901560-1567-1570-1577-1580-1587-16001610-1620-1630-1660-1667-1670-16771680-1687-1700-1720-4430-4437-443794440-4447-44479-4450-4457-445794460-4467-4470-4477-4480-4487-4490 Materiale - Material Lega speciale nichelata - Special nickel-plated alloy0,026 10 COD. - 01431 Materiale - Material Nylon grigio - Grey nylon 0,00210 - 233 Accessori vari Sundry accessories Rullo intercambiabile Rullo intercambiabile (con molle) Interchangeable roller bolt Interchangeable roller bolt ( with springs) Per serrature serie For locks series cod. 100030-100040-100050-100060100130-100140-100150-100160-11601170-1180-1260-1270-1280-14301440-1450-1460-1470-1480-14901560-1570-1580-1600-1610-16201630-1660-1670-1680-1700-17204430-4440-4450-4460-4470-4480-4490 Per serrature serie For locks series cod. 380-780-880-1780 COD. 0385 Materiale - Material Ottone nichelato - Nckel-plated brass COD. 0,05010 - Rullo intercambiabile Materiale - Material 01435 Ottone nichelato - Nckel-plated brass 0,02610 - Vite cilindro Interchangeable roller bolt Cylinder screw Per serrature serie For locks series cod. 390-790-890-990 COD. 0395 Materiale - Material Ottone nichelato - Nckel-plated brass 0,03210 - Rullo intercambiabile Per cilindri For cylinders Interchangeable roller bolt COD. A Materiale - Material VTC00122 Acciaio nichelato - Nickel-plated steel0,002100 - Acciaio nichelato - Nickel-plated steel 0,003100 - VTC00227 Acciaio nichelato - Nickel-plated steel0,004100 - VTC00337 Per serrature serie For locks series Acciaio nichelato - Nickel-plated steel0,006100 - VTC00447 cod. 11140-11170-1940-1970-41140Acciaio nichelato - Nickel-plated steel0,008100 - VTC00667 41170-4940-4970-5930-5940-59605970 Acciaio nichelato - Nickel-plated steel0,009100 - VTC00777 COD. 05935 Acciaio nichelato - Nickel-plated steel0,010100 - VTC00887 Materiale - Material Ottone nichelato - Nckel-plated brass Acciaio nichelato - Nickel-plated steel 0,011 100 VTC00997 0,03210 - Rullo intercambiabile Interchangeable roller bolt Per serrature serie For locks series cod. 338-358-4338-4530-530-540 COD. 0535 234 Materiale - Material Ottone nichelato - Nckel-plated brass 0,01810 - - Acciaio nichelato - Nickel-plated steel0,014100 VTC011117 Sottofrontali Forend spacers Sottofrontale Sottofrontale Forend spacer Forend spacer Per serrature con frontale mm. 16 For locks with forend mm. 16 cod. 320-322-328-330-332-338-340-342-348-350-352-358-4320-4328-4330 4338-4340-4350-4530-4535-530-535-540-545 COD. 0720 N Materiale - Material Nylon nero - Black nylon Per serrature di sicurezza per montanti con frontale mm. 25 For vertical security locks with forend mm. 25 COD. 0,01250 - Sottofrontale 0623 N Materiale - Material Nylon nero - Black nylon Sottofrontale Forend spacer Forend spacer Per serrature di sicurezza e a doppia mappa per fasce con frontale mm. 25 For horizontal security and double-bit key locks with forend mm. 25 Per serrature con frontale mm. 16 For locks with forend mm. 16 cod. 320-322-328-330-332-338-340-342-348-350-352-358-4320-4328-4330 4338-4340-4350-4530-4535-530-535-540-545 COD. 0721 N Materiale - Material Nylon nero - Black nylon COD. 0,01350 - 0624 N Per serrature per fasce con frontale mm. 16 e per montanti For horizontal locks with forend mm. 16 and vertical locks cod. 327-334-335-337-339-345-351-354-355-356-357-359-4335-4339-4355 4356-4531-531-541 Materiale - Material Nylon nero - Black nylon 0,01050 - 0625 N Materiale - Material Nylon nero - Black nylon 0,00250 - Sottofrontale Forend spacer Forend spacer Per serrature per fasce con frontale mm. 16 e per montanti For horizontal locks with forend mm. 16 and vertical locks cod. 327-334-335-337-339-345-351-354-355-356-357-359-4335-4339-4355 4356-4531-531-541 0731 N 0,00450 - Per serrature con frontale mm. 22 For locks with forend mm. 22 COD. Sottofrontale COD. Nylon nero - Black nylon Forend spacer Forend spacer 0730 N Materiale - Material Sottofrontale Sottofrontale COD. 0,00750 - Materiale - Material Nylon nero - Black nylon Per serrature multipunto con frontale a U For multi-point locks with forend U COD. 0,01150 - 0633 N Materiale - Material Nylon nero - Black nylon 0,00350 - 235 INCONTRI ELETTRICI ELECTRIC STRIKING PLATES - INCONTRI ELETTRICI - ELECTRIC STRIKING PLATES Pag. 239 - PIASTRE FRONTALI PER INCONTRI ELETTRICI - FACEPLATES FOR ELECTRIC STRIKES Pag. 245 - CORPO INCONTRI ELETTRICI Pag. 249 - ELECTRIC STRIKES 237 238 Incontri elettrici Electric striking plates Caratteristiche costruttive Corpo incontro elettrico e controscrocco in lega speciale nichelata Piastra frontale in acciaio inox Leve di ancoraggio in acciaio inox Viti e camme INOX Stainless steel screws and cams Caratteristiche tecniche Corpo incontro elettrico da 16,5 mm adattabile a tutti i profili Controscrocco reversibile, radiale e regolabile Piastre frontali intercambiabili e disponibili sia in versione per serrature con catenaccio basculante che per serrature con catenaccio avanzante Piastra INOX satinata Plate in brush-polished stainless steel Fermo a giorno Mechanical unlatching Protezione elettronica 300.000 aperture garantite Resistente a impatti fino a 400 kg Basso consumo elettrico Resistente alla corrosione come da standard UNI ISO 9227 Rispetta gli standard di compatibilità elettromagnetica 2004/108/CE (EN 55014) Vaschetta copri-spacco Housing cover Antiripetitore Hold open device Constructive features Special nickel-plated electric strike and latch Stainless steel forend Stainless steel anchor levers Corpo incontro da 16,5 mm regolabile, reversibile, radiale Electric strike 16,5 mm radial, turning adjustable latch Technical features Electric strike dimension: 16,5 mm, suitable for all profiles Radial turning adjustable latch Interchangeable faceplates designed both for locks with tipping dead bolt and for locks with advancing dead bolt Electronic protection 300.000 guaranteed openings Withstands impacts up to 400 kg Low power consumption Corrosion resistant according to UNI ISO 9227 standards Complies with electromagnetic compatibility standard 2004/108/CE (EN 55014) Regolazione verticale Regolazione orizzontale Vertical adjustment Horizontal adjustment Versioni disponibili Versions available cod. 060 Antiripetitore e fermo a giorno Hold open with mechanical unlatching cod. 061 Senza antiripetitore e fermo a giorno Fail secure with mechanical unlatching cod. 072 Antipanico Fail safe FUNZIONAMENTO Sganciamento permanente dopo l’impulso elettrico. Fermo a giorno. WORKING Hold open with mechanical release function FUNZIONAMENTO Sganciamento solo durante l’impulso elettrico. Fermo a giorno. WORKING Fail secure with mechanical release function FUNZIONAMENTO Sganciamento solo in caso di interruzione di corrente. WORKING Fail safe 239 Incontri elettrici Electric striking plates Reversibile - Reversible Per serrature serie - For locks series cod. 100020-100030-100040-100050-100060-100120-100130-100140-100150100160-1160-1170-1180-1260-1270-1280-1430-1440-1450-1460-1470-14801560-1570-1580-1660-1670-1680-327-330-332-337-338-350-351-352-357-3584330-4338-4350-4430-4440-4450-4460-4470-4480-4530-530-540 Funzionamento Voltaggio COD. Working Voltage 02526XEL60 02526XEL61 02526XEL72 Sganciamento permanente dopo l’impulso elettrico Fermoa giorno Hold open with mechanical release function Sganciamento solo durante l’impulso elettrico Fermo a giorno Fail secure with mechanical release function Sganciamento solo in caso di interruzione di corrente Fail safe 9 ÷ 16 V a.c./d.c.0,240 1 5 9 ÷ 16 V a.c./d.c.0,240 1 5 12 V d.c. 0,2401 5 Per serrature ad ingranaggi con catenaccio avanzante For locks with gear mechanism movements with advancing dead bolt Reversibile - Reversible Per serrature serie - For locks series cod. 1600-1610-1620-1630-1700-1720 Funzionamento Voltaggio COD. Working Voltage 02576XEL60 02576XEL61 02576XEL72 240 Sganciamento permanente dopo l’impulso elettrico Fermoa giorno Hold open with mechanical release function Sganciamento solo durante l’impulso elettrico Fermoa giorno Fail secure with mechanical release function Sganciamento solo in caso di interruzione di corrente Fail safe 9 ÷ 16 V a.c./d.c.0,245 1 5 9 ÷ 16 V a.c./d.c.0,245 1 5 12 V d.c. 0,2451 5 Incontri elettrici Electric striking plates Per serrature ad ingranaggi con catenaccio avanzante For locks with gear mechanism movements with advancing dead bolt Regolazione orizzontale e verticale Horizontal and vertical adjustment Reversibile - Reversible Per serrature serie - For locks series cod. 1600-1610-1620-1630-1700-1720 Funzionamento Voltaggio COD. Working Voltage 02376XEL60 02376XEL61 Per profili tipo - For profiles type Domal stopper PG Finestra NC 45 Int. Finestra 02376XEL72 Sganciamento permanente dopo l’impulso elettrico Fermoa giorno Hold open with mechanical release function Sganciamento solo durante l’impulso elettrico Fermoa giorno Fail secure with mechanical release function Sganciamento solo in caso di interruzione di corrente Fail safe 9 ÷ 16 V a.c./d.c.0,265 1 5 9 ÷ 16 V a.c./d.c.0,265 1 5 12 V d.c. 0,2651 5 Regolazione orizzontale e verticale Horizontal and vertical adjustment Reversibile - Reversible Per serrature serie - For locks series cod. 100020-100030-100040-100050-100060-100120-100130-100140-100150100160-1160-1170-1180-1260-1270-1280-1430-1440-1450-1460-1470-14801560-1570-1580-1660-1670-1680-327-330-332-337-338-350-351-352-357-3584330-4338-4350-4430-4440-4450-4460-4470-4480-4530-530-540 Funzionamento Voltaggio COD. Working Voltage 02396XEL60 02396XEL61 Per profili tipo - For profiles type Domal stopper PG Finestra NC 45 Int. Finestra 02396XEL72 Sganciamento permanente dopo l’impulso elettrico Fermoa giorno Hold open with mechanical release function Sganciamento solo durante l’impulso elettrico Fermoa giorno Fail secure with mechanical release function Sganciamento solo in caso di interruzione di corrente Fail safe 9 ÷ 16 V a.c./d.c.0,260 1 5 9 ÷ 16 V a.c./d.c.0,260 1 5 12 V d.c. 0,2601 5 241 Incontri elettrici Electric striking plates Per serrature ad ingranaggi con catenaccio avanzante For locks with gear mechanism movements with advancing dead bolt Regolazione orizzontale e in profondità Horizontal and depht adjustment Reversibile - Reversible Per serrature serie - For locks series cod. 1600-1610-1620-1630-1700-1720 Funzionamento Voltaggio COD. Working Voltage 02676XEL60 Per profili tipo - For profiles type Domal Break PA 52 Porta Domal stopper PG Porta NC 55 Int. Porta NC 45 Int. Porta 02676XEL61 02676XEL72 Sganciamento permanente dopo l’impulso elettrico Fermoa giorno Hold open with mechanical release function Sganciamento solo durante l’impulso elettrico Fermoa giorno Fail secure with mechanical release function Sganciamento solo in caso di interruzione di corrente Fail safe 9 ÷ 16 V a.c./d.c.0,265 1 5 9 ÷ 16 V a.c./d.c.0,265 1 5 12 V d.c. 0,2651 5 Regolazione orizzontale e in profondità Horizontal and depht adjustment Reversibile - Reversible Per serrature serie - For locks series cod. 100020-100030-100040-100050-100060-100120-100130-100140-100150100160-1160-1170-1180-1260-1270-1280-1430-1440-1450-1460-1470-14801560-1570-1580-1660-1670-1680-327-330-332-337-338-350-351-352-357-3584330-4338-4350-4430-4440-4450-4460-4470-4480-4530-530-540 Funzionamento Voltaggio COD. Working Voltage 02696XEL60 Per profili tipo - For profiles type Domal Break PA 52 Porta Domal stopper PG Porta NC 55 Int. Porta NC 45 Int. Porta 242 02696XEL61 02696XEL72 Sganciamento permanente dopo l’impulso elettrico Fermoa giorno Hold open with mechanical release function Sganciamento solo durante l’impulso elettrico Fermoa giorno Fail secure with mechanical release function Sganciamento solo in caso di interruzione di corrente Fail safe 9 ÷ 16 V a.c./d.c.0,260 1 5 9 ÷ 16 V a.c./d.c.0,260 1 5 12 V d.c. 0,2601 5 Incontri elettrici Electric striking plates Per serrature ad ingranaggi con catenaccio avanzante For locks with gear mechanism movements with advancing dead bolt Regolazione orizzontale e verticale Horizontal and vertical adjustment Reversibile - Reversible Per serrature serie - For locks series cod. 1600-1610-1620-1630-1700-1720 Funzionamento Voltaggio COD. Working Voltage 02876XEL60 02876XEL61 Per profili tipo - For profiles type 02876XEL72 R 40, R 50 Sganciamento permanente dopo l’impulso elettrico Fermoa giorno Hold open with mechanical release function Sganciamento solo durante l’impulso elettrico Fermoa giorno Fail secure with mechanical release function Sganciamento solo in caso di interruzione di corrente Fail safe 9 ÷ 16 V a.c./d.c.0,305 1 5 9 ÷ 16 V a.c./d.c.0,305 1 5 12 V d.c. 0,3051 5 Regolazione orizzontale e verticale Horizontal and vertical adjustment Reversibile - Reversible Per serrature serie - For locks series cod. 100020-100030-100040-100050-100060-100120-100130-100140-100150100160-1160-1170-1180-1260-1270-1280-1430-1440-1450-1460-1470-14801560-1570-1580-1660-1670-1680-327-330-332-337-338-350-351-352-357-3584330-4338-4350-4430-4440-4450-4460-4470-4480-4530-530-540 Funzionamento Voltaggio COD. Working Voltage 02896XEL60 02896XEL61 Per profili tipo - For profiles type R 40, R 50 02896XEL72 Sganciamento permanente dopo l’impulso elettrico Fermoa giorno Hold open with mechanical release function Sganciamento solo durante l’impulso elettrico Fermoa giorno Fail secure with mechanical release function Sganciamento solo in caso di interruzione di corrente Fail safe 9 ÷ 16 V a.c./d.c.0,300 1 5 9 ÷ 16 V a.c./d.c.0,300 1 5 12 V d.c. 0,3001 5 243 Incontri elettrici Electric striking plates Per serrature ad ingranaggi con catenaccio avanzante For locks with gear mechanism movements with advancing dead bolt Regolazione orizzontale e verticale Horizontal and vertical adjustment Reversibile - Reversible Per serrature serie - For locks series cod. 1600-1610-1620-1630-1700-1720 Funzionamento Voltaggio COD. Working Voltage 03076XEL60 03076XEL61 Per profili tipo - For profiles type 03076XEL72 All.co 5 Sormonto Sganciamento permanente dopo l’impulso elettrico Fermoa giorno Hold open with mechanical release function Sganciamento solo durante l’impulso elettrico Fermoa giorno Fail secure with mechanical release function Sganciamento solo in caso di interruzione di corrente Fail safe 9 ÷ 16 V a.c./d.c.0,280 1 5 9 ÷ 16 V a.c./d.c.0,280 1 5 12 V d.c. 0,2801 5 Regolazione orizzontale e verticale Horizontal and vertical adjustment Reversibile - Reversible Per serrature serie - For locks series cod. 100020-100030-100040-100050-100060-100120-100130-100140-100150100160-1160-1170-1180-1260-1270-1280-1430-1440-1450-1460-1470-14801560-1570-1580-1660-1670-1680-327-330-332-337-338-350-351-352-357-3584330-4338-4350-4430-4440-4450-4460-4470-4480-4530-530-540 Funzionamento Voltaggio COD. Working Voltage 03096XEL60 03096XEL61 Per profili tipo - For profiles type All.co 5 Sormonto 244 03096XEL72 Sganciamento permanente dopo l’impulso elettrico Fermoa giorno Hold open with mechanical release function Sganciamento solo durante l’impulso elettrico Fermoa giorno Fail secure with mechanical release function Sganciamento solo in caso di interruzione di corrente Fail safe 9 ÷ 16 V a.c./d.c.0,275 1 5 9 ÷ 16 V a.c./d.c.0,275 1 5 12 V d.c. 0,2751 5 Piastre frontali per incontri elettrici Faceplates for electric strikes Reversibile - Reversible Per serrature serie - For locks series cod. 100020-100030-100040-100050-100060-100120-100130-100140-100150100160-1160-1170-1180-1260-1270-1280-1430-1440-1450-1460-1470-14801560-1570-1580-1660-1670-1680-327-330-332-337-338-350-351-352-357-3584330-4338-4350-4430-4440-4450-4460-4470-4480-4530-530-540 COD. 02526XEL Per serrature ad ingranaggi con catenaccio avanzante For locks with gear mechanism movements with advancing dead bolt Materiale - Material Acciaio inox - Stainless steel 0,09510 - Reversibile - Reversible Per serrature serie - For locks series cod. 1600-1610-1620-1630-1700-1720 COD. 02576XEL Per serrature ad ingranaggi con catenaccio avanzante For locks with gear mechanism movements with advancing dead bolt Materiale - Material Acciaio inox - Stainless steel 0,10010 - Regolazione orizzontale e verticale Horizontal and vertical adjustment Reversibile - Reversible Per serrature serie - For locks series cod. 1600-1610-1620-1630-1700-1720 Per profili tipo - For profiles type Domal stopper PG Finestra NC 45 Int. Finestra COD. 02376XEL Materiale - Material Acciaio inox - Stainless steel 0,12010 - 245 Piastre frontali per incontri elettrici Faceplates for electric strikes Regolazione orizzontale e verticale Horizontal and vertical adjustment Reversibile - Reversible Per serrature serie - For locks series cod. 100020-100030-100040-100050-100060-100120-100130-100140-100150100160-1160-1170-1180-1260-1270-1280-1430-1440-1450-1460-1470-14801560-1570-1580-1660-1670-1680-327-330-332-337-338-350-351-352-357-3584330-4338-4350-4430-4440-4450-4460-4470-4480-4530-530-540 Per profili tipo - For profiles type Domal stopper PG Finestra NC 45 Int. Finestra Per serrature ad ingranaggi con catenaccio avanzante For locks with gear mechanism movements with advancing dead bolt COD. 02396XEL Materiale - Material Acciaio inox - Stainless steel 0,11510 - Regolazione orizzontale e in profondità Horizontal and depht adjustment Reversibile - Reversible Per serrature serie - For locks series cod. 1600-1610-1620-1630-1700-1720 Per profili tipo - For profiles type Domal Break PA 52 Porta Domal stopper PG Porta NC 55 Int. Porta NC 45 Int. Porta COD. 02676XEL Materiale - Material Acciaio inox - Stainless steel 0,12010 - Regolazione orizzontale e in profondità Horizontal and depht adjustment Reversibile - Reversible Per serrature serie - For locks series cod. 100020-100030-100040-100050-100060-100120-100130-100140-100150100160-1160-1170-1180-1260-1270-1280-1430-1440-1450-1460-1470-14801560-1570-1580-1660-1670-1680-327-330-332-337-338-350-351-352-357-3584330-4338-4350-4430-4440-4450-4460-4470-4480-4530-530-540 Per profili tipo - For profiles type Domal Break PA 52 Porta Domal stopper PG Porta NC 55 Int. Porta NC 45 Int. Porta 246 COD. 02696XEL Materiale - Material Acciaio inox - Stainless steel 0,11510 - Piastre frontali per incontri elettrici Faceplates for electric strikes Per serrature ad ingranaggi con catenaccio avanzante For locks with gear mechanism movements with advancing dead bolt Regolazione orizzontale e verticale Horizontal and vertical adjustment Reversibile - Reversible Per serrature serie - For locks series cod. 1600-1610-1620-1630-1700-1720 Per profili tipo - For profiles type R 40, R 50 COD. 02876XEL Materiale - Material Acciaio inox - Stainless steel 0,16010 - Regolazione orizzontale e verticale Horizontal and vertical adjustment Reversibile - Reversible Per serrature serie - For locks series cod. 100020-100030-100040-100050-100060-100120-100130-100140-100150100160-1160-1170-1180-1260-1270-1280-1430-1440-1450-1460-1470-14801560-1570-1580-1660-1670-1680-327-330-332-337-338-350-351-352-357-3584330-4338-4350-4430-4440-4450-4460-4470-4480-4530-530-540 Per profili tipo - For profiles type R 40, R 50 Per serrature ad ingranaggi con catenaccio avanzante For locks with gear mechanism movements with advancing dead bolt COD. 02896XEL Materiale - Material Acciaio inox - Stainless steel 0,15510 - Regolazione orizzontale e verticale Horizontal and vertical adjustment Reversibile - Reversible Per serrature serie - For locks series cod. 1600-1610-1620-1630-1700-1720 Per profili tipo - For profiles type All.co 5 Sormonto COD. 03076XEL Materiale - Material Acciaio inox - Stainless steel 0,13510 - 247 Piastre frontali per incontri elettrici Faceplates for electric strikes Regolazione orizzontale e verticale Horizontal and vertical adjustment Reversibile - Reversible Per serrature serie - For locks series cod. 100020-100030-100040-100050-100060-100120-100130-100140-100150100160-1160-1170-1180-1260-1270-1280-1430-1440-1450-1460-1470-14801560-1570-1580-1660-1670-1680-327-330-332-337-338-350-351-352-357-3584330-4338-4350-4430-4440-4450-4460-4470-4480-4530-530-540 Per profili tipo - For profiles type All.co 5 Sormonto 248 COD. 03096XEL Materiale - Material Acciaio inox - Stainless steel 0,13010 - Corpo incontri elettrici Electric strikes Sganciamento permanente Hold - open Reversibile, radiale, regolabile Reversible, radial, adjustable Funzionamento: L’incontro elettrico si sgancia con un singolo impulso elettrico predisponendosi all’apertura; si bloccherà nuovamente solo aprendo e chiudendo la porta - Funzione di rilascio meccanico (fermo a giorno). Working: The electric strike opens with a single electrical impulse; it remains in open position until the closing of the door - Provided with mechanical release function. Per incontri elettrici serie - For electric striking plates series cod. - - - - - - - - 60 COD. 060 Sganciamento momentaneo Fail - secure Voltaggio - Voltage 9 ÷ 16 V a.c./d.c. 0,1501 10 Reversibile, radiale, regolabile Reversible, radial, adjustable Funzionamento: L’incontro elettrico si sgancia solamente mentre riceve l’impulso Funzione di rilascio meccanico (fermo a giorno). Working: The electric strike is locked when unenergized - Provided with mechanical release function. Per incontri elettrici serie - For electric striking plates series cod. - - - - - - - - 61 COD. 061 Antipanico Fail - safe Voltaggio - Voltage 9 ÷ 16 V a.c./d.c. 0,1501 10 Reversibile, radiale, regolabile Reversible, radial, adjustable Funzionamento: L’incontro elettrico rimane chiuso quando è alimentato da corrente elettrica. In mancanza di corrente l’incontro elettrico resta in posizione di “aperto” Working: The electric strike remains in closed position while the coil is selected. When the electric current is stopped, the electric strike stays in open position. Per incontri elettrici serie - For electric striking plates series cod. - - - - - - - - 72 COD. 072 Voltaggio - Voltage 12 V d.c. 0,1501 10 249 Contropiastre per serrature Striking plates for locks - CONTROPIASTRE PIANE Pag. 253 - FLAT STRIKING PLATES - CONTROPIASTRE IN NYLON Pag. 259 - NYLON STRIKING PLATES - CONTROPIASTRE IN METALLO - METAL STRIKING PLATES - CONTROPIASTRE REGOLABILI IN ACCIAIO INOX Pag. 282 - STAINLESS STEEL ADJUSTABLE STRIKING PLATES Pag. 300 251 Contropiastre piane Flat striking plates Per serrature serie - For locks series cod. 1770-1775-370-375-378-382-770-775-778-782-870-875-878-882 COD. A Materiale - Material 01611 A 16 Acciaio cromato - Chrome-plated steel0,03350 02211 A 22 Acciaio cromato - Chrome-plated steel0,05450- - Per serrature serie - For locks series cod. 1771-1777-1780-1781-1785-371-377-380-381-385-388-390-391-395-771-777780-781-785-788-790-791-795-871-877-880-881-885-888-890-891-895-990-991995 COD. A Materiale - Material 01613 A 16 Acciaio cromato - Chrome-plated steel0,04650 - 02213 A 22 Acciaio cromato - Chrome-plated steel0,06750 - Per serrature serie - For locks series cod. 100021-100031-100041-100051-100061-334-335-339-354-355-359-43354339-4355-4531-531-541 252 COD. A Materiale - Material 01614 A 16 Acciaio cromato - Chrome-plated steel0,02150 - 02214 A 22 Acciaio cromato - Chrome-plated steel0,03450 - Contropiastre piane Flat striking plates Per serrature serie - For locks series cod. 345 COD. A Materiale - Material 01615 A 16 Acciaio cromato -Chrome-plated steel 0,04650 - 02215 A 22 Acciaio cromato - Chrome-plated steel0,06750 - Per serrature serie - For locks series cod. 100020-100025-100030-100035-100040-100045-100050-100055-100060100065-328-330-332-338-348-350-352-358-4328-4330-4338-4350-4530-4535530-535-540-545 COD. A Materiale - Material 01616 A 16 Acciaio cromato - Chrome-plated steel0,03650 - 02216 A 22 Acciaio cromato - Chrome-plated steel0,04850 - Per serrature serie - For locks series cod. 1776-327-337-351-356-357-376-386-396-399-4356-776-786-796-799-899-999 COD. A Materiale - Material 01619 A 16 Acciaio cromato - Chrome-plated steel0,02450 - 02219 A 22 Acciaio cromato - Chrome-plated steel0,03850 - 253 Contropiastre piane Flat striking plates Per serrature serie - For locks series cod. 4621/F20 COD. 02014 A Materiale - Material Acciaio nichelato - Nickel-plated steel 0,02950 - Per serrature serie - For locks series cod. 4626/F20 COD. 02019 A Materiale - Material Acciaio nichelato - Nickel-plated steel 0,03250 - Per serrature serie - For locks series cod. 11140-11141-11145-11148-11170-11171-11175-11178-1940-1941-1945-19481970-1971-1975-1978-41140-41141-41145-41148-41170-41171-41175-411784940-4941-4945-4948-4970-4971-4975-4978-5930-5931-5935-5938-5940-59415945-5948-5950-5951-5960-5961-5965-5968-5970-5971-5975-5978-5980-5981 COD. 02521 X 254 Materiale - Material Acciaio inox - Stainless steel 0,06250 - Contropiastre piane Flat striking plates Per serrature serie - For locks series cod. 11061-11071-11081-1161-1166-1171-1176-1181-1186-1261-1266-1271-12761281-1286-1431-1436-1441-1446-1451-1456-1461-1466-1471-1473-1476-14811486-1491-1496-1531-1561-1566-1571-1576-1581-1586-1661-1666-1671-16761681-1686-4431-4436-4441-4446-4451-4456-4461-4466-4471-4473-4476-44814486-4491-4496 Per deviatori serie - For deviators series cod. 0661-0662 COD. 02524 L Materiale - Material Alluminio - Aluminium 0,02150 - Per serrature serie - For locks series cod. 11061-11071-11081-1161-1166-1171-1176-1181-1186-1261-1266-1271-12761281-1286-1431-1436-1441-1446-1451-1456-1461-1466-1471-1473-1476-14811486-1491-1496-1531-1561-1566-1571-1576-1581-1586-1661-1666-1671-16761681-1686-4431-4436-4441-4446-4451-4456-4461-4466-4471-4473-4476-44814486-4491-4496 Per deviatori serie - For deviators series cod. 0661-0662 COD. 02524 X Materiale - Material Acciaio inox - Stainless steel 0,04650 - Per serrature serie - For locks series cod. 100020-100025-100030-100035-100040-100045-100050-100055-100060100065-100120-100125-100130-100135-100140-100145-100150-100155100160-100165-1160-1165-1167-1170-1175-1177-1180-1185-1187-1260-12651267-1270-1275-1277-1280-1285-1287-1430-1435-1437-14379-1440-1445-144714479-1450-1455-1457-14579-1460-1465-1467-1470-1475-1477-1480-14851487-1490-1495-1560-1565-1567-1570-1575-1577-1580-1585-1587-1660-16651667-1670-1675-1677-1680-1685-1687-4430-4435-4437-44379-4440-4445-444744479-4450-4455-4457-44579-4460-4465-4467-4470-4475-4477-4480-44854487-4490-4495 COD. 02526 L Materiale - Material Alluminio - Aluminium 0,02650 - 255 Contropiastre piane Flat striking plates Per serrature serie - For locks series cod. 100020-100025-100030-100035-100040-100045-100050-100055-100060100065-100120-100125-100130-100135-100140-100145-100150-100155100160-100165-1160-1165-1167-1170-1175-1177-1180-1185-1187-1260-12651267-1270-1275-1277-1280-1285-1287-1430-1435-1437-14379-1440-1445-144714479-1450-1455-1457-14579-1460-1465-1467-1470-1475-1477-1480-14851487-1490-1495-1560-1565-1567-1570-1575-1577-1580-1585-1587-1660-16651667-1670-1675-1677-1680-1685-1687-4430-4435-4437-44379-4440-4445-444744479-4450-4455-4457-44579-4460-4465-4467-4470-4475-4477-4480-44854487-4490-4495 COD. 02526 X Materiale - Material Acciaio inox - Stainless steel 0,06050 - Per serrature serie - For locks series cod. 1168-1178-1188-1268-1278-1288-1438-1439-1448-1449-1458-1459-1468-1478 1488-1568-1578-1588-1668-1678-1688-4438-4439-4448-4449-4458-4459-4468 4478-4488 COD. 02528 X Materiale - Material Acciaio inox - Stainless steel 0,06450 - Per serrature serie - For locks series cod. 1601-1611-1621-1631-1701-1721-1731-1741 Per deviatori serrature multipunto ad ingranaggi For deviators of vertical multi-point locks with gear mechanism movements COD. 02574 X 256 Materiale - Material Acciaio inox - Stainless steel 0,05150 - Contropiastre piane Flat striking plates Per serrature serie - For locks series cod. 1600-1605-1610-1615-1620-1625-1630-1635-1700-1705-1720-1725-1740 COD. 02576 X Materiale - Material Acciaio inox - Stainless steel 0,06550 - 257 258 Contropiastre in nylon Nylon striking plates Per serrature serie - For locks series cod. 100021-100031-100041-100051-100061-100121-100131-100141-100151100161-1770-1771-1777-1780-1781-1785-327-334-335-337-339-351-354-355357-359-370-371-377-378-380-381-382-385-388-390-391-395-399-4335-43394355-4531-531-541-770-771-777-778-780-781-782-785-788-790-791-795-799870-871-877-878-880-881-882-885-888-890-891-895-899-990-991-995-999 Per profili tipo - For profiles type All.co 5 COD. 02181 N Materiale - Material Nylon nero - Black nylon 0,02420 - Per serrature serie - For locks series cod. 330-332-338-350-352-358-4330-4338-4350-4530-530-540 Per profili tipo - For profiles type All.co 5 COD. 02186 N Materiale - Material Nylon nero - Black nylon 0,02220 - Per serrature serie - For locks series cod. 1775-320-322-328-340-342-345-348-375-4320-4328-4340-4535-535-545-775-875 Per profili tipo - For profiles type All.co 5 COD. 02187 N Materiale - Material Nylon nero - Black nylon 0,02320 - 259 Contropiastre in nylon Nylon striking plates Per serrature serie - For locks series cod. 11141-11148-11171-11178-1161-1171-1181-1261-1271-1281-1431-1441-14511461-1471-1481-1561-1571-1581-1661-1671-1681-1941-1948-1971-1978-4114141148-41171-41178-4431-4441-4451-4461-4471-4481-4941-4948-4971-49785931-5941-5948-5951-5961-5971-5978-5981 Per deviatori serie - For deviators series cod. 0661-0662 Per profili tipo - For profiles type All.co 5 COD. 02194 N Materiale - Material Nylon nero - Black nylon 0,01520 - Per serrature serie - For locks series cod. 100020-100025-100030-100035-100040-100045-100050-100055-100060-100065100120-100125-100130-100135-100140-100145-100150-100155-100160-1001651160-1165-1167-1170-1175-1177-1180-1185-1187-1260-1265-1267-1270-12751277-1280-1285-1287-1430-1435-1437-14379-1440-1445-1447-14479-1450-14551457-14579-1460-1465-1467-1470-1475-1477-1480-1485-1487-1560-1565-15671570-1575-1577-1580-1585-1587-1660-1665-1667-1670-1675-1677-1680-16851687-4430-4435-4437-44379-4440-4445-4447-44479-4450-4455-4457-445794460-4465-4467-4470-4475-4477-4480-4485-4487-5930-5935-5960-5965 Per profili tipo - For profiles type All.co 5 COD. 02196 N Materiale - Material Nylon nero - Black nylon 0,02220 - Per serrature serie - For locks series cod. 11140-11145-11170-11175-1168-1178-1188-1268-1278-1288-1438-1439-14481449-1458-1459-1468-1478-1488-1568-1578-1588-1668-1678-1688-1940-19451970-1975-41140-41145-41170-41175-4438-4439-4448-4449-4458-4459-44684478-4488-4940-4945-4970-4975-5938-5940-5945-5950-5968-5970-5975-5980 Per profili tipo - For profiles type All.co 5 COD. 02198 N 260 Materiale - Material Nylon nero - Black nylon 0,02420 - Contropiastre in nylon Nylon striking plates Per serrature serie - For locks series cod. 100021-100031-100041-100051-100061-100121-100131-100141-100151100161-1770-1771-1777-1780-1781-1785-327-334-335-337-339-351-354-355357-359-370-371-377-378-380-381-382-385-388-390-391-395-399-4335-43394355-4531-531-541-770-771-777-778-780-781-782-785-788-790-791-795-799870-871-877-878-880-881-882-885-888-890-891-895-899-990-991-995-999 Per profili tipo - For profiles type Domal stopper PG Finestra NC 45 Int. Finestra COD. 02381 N Materiale - Material Nylon nero - Black nylon 0,01120 - Per serrature serie - For locks series cod. 100021-100031-100041-100051-100061-100121-100131-100141-100151100161-1771-1777-327-337-351-357-371-377-380-381-385-388-390-391-395399-771-777-780-781-785-788-790-791-795-799-871-877-880-881-885-888-890891-895-899-990-991-995-999 Per profili tipo - For profiles type Domal stopper PG Finestra NC 45 Int. Finestra COD. 02383 N Materiale - Material Nylon nero - Black nylon 0,01420 - Per serrature serie - For locks series cod. 330-332-338-350-352-358-4330-4338-4350-4530-530-540 Per profili tipo - For profiles type Domal stopper PG Finestra NC 45 Int. Finestra COD. 02386 N Materiale - Material Nylon nero - Black nylon 0,01120 - 261 Contropiastre in nylon Nylon striking plates Per serrature serie - For locks series cod. 1775-320-322-328-340-342-345-348-375-4320-4328-4340-4535-535-545-775875 Per profili tipo - For profiles type Domal stopper PG Finestra NC 45 Int. Finestra COD. 02387 N Materiale - Material Nylon nero - Black nylon 0,01520 - Per serrature serie - For locks series cod. 11141-11148-11171-11178-1161-1171-1181-1261-1271-1281-1431-1441-14511461-1471-1481-1561-1571-1581-1661-1671-1681-1941-1948-1971-1978-4114141148-41171-41178-4431-4441-4451-4461-4471-4481-4941-4948-4971-49785931-5941-5948-5951-5961-5971-5978-5981 Per deviatori serie - For deviators series cod. 0661-0662 Per profili tipo - For profiles type Domal stopper PG Finestra NC 45 Int. Finestra COD. 02394 N Materiale - Material Nylon nero - Black nylon 0,00820 - Per serrature serie - For locks series cod. 100020-100025-100030-100035-100040-100045-100050-100055-100060-100065100120-100125-100130-100135-100140-100145-100150-100155-100160-1001651160-1165-1167-1170-1175-1177-1180-1185-1187-1260-1265-1267-1270-12751277-1280-1285-1287-1430-1435-1437-14379-1440-1445-1447-14479-1450-14551457-14579-1460-1465-1467-1470-1475-1477-1480-1485-1487-1560-1565-15671570-1575-1577-1580-1585-1587-1660-1665-1667-1670-1675-1677-1680-16851687-4430-4435-4437-44379-4440-4445-4447-44479-4450-4455-4457-445794460-4465-4467-4470-4475-4477-4480-4485-4487-5930-5935-5960-5965 Per profili tipo - For profiles type Domal stopper PG Finestra NC 45 Int. Finestra 262 COD. 02396 N Materiale - Material Nylon nero - Black nylon 0,00820 - Contropiastre in nylon Nylon striking plates Per serrature serie - For locks series cod. 11140-11145-11170-11175-1168-1178-1188-1268-1278-1288-1438-1439-14481449-1458-1459-1468-1478-1488-1568-1578-1588-1668-1678-1688-1940-19451970-1975-41140-41145-41170-41175-4438-4439-4448-4449-4458-4459-44684478-4488-4940-4945-4970-4975-5938-5940-5945-5950-5968-5970-5975-5980 Per profili tipo - For profiles type Domal stopper PG Finestra NC 45 Int. Finestra COD. 02398 N Materiale - Material Nylon nero - Black nylon 0,00820 - Per serrature serie - For locks series cod. 100021-100031-100041-100051-100061-100121-100131-100141-100151100161-1770-1771-1777-1780-1781-1785-327-334-335-337-339-351-354-355357-359-370-371-377-378-380-381-382-385-388-390-391-395-399-4335-43394355-4531-531-541-770-771-777-778-780-781-782-785-788-790-791-795-799870-871-877-878-880-881-882-885-888-890-891-895-899-990-991-995-999 Per profili tipo - For profiles type Alphetta 445 COD. 02481 N Materiale - Material Nylon nero - Black nylon 0,02120 - Per serrature serie - For locks series cod. 330-332-338-350-352-358-4330-4338-4350-4530-530-540 Per profili tipo - For profiles type Alphetta 445 COD. 02486 N Materiale - Material Nylon nero - Black nylon 0,02320 - 263 Contropiastre in nylon Nylon striking plates Per serrature serie - For locks series cod. 100021-100031-100041-100051-100061-100121-100131-100141-100151100161-1770-1771-1777-1780-1781-1785-327-334-335-337-339-351-354-355357-359-370-371-377-378-380-381-382-385-388-390-391-395-399-4335-43394355-4531-531-541-770-771-777-778-780-781-782-785-788-790-791-795-799870-871-877-878-880-881-882-885-888-890-891-895-899-990-991-995-999 Per profili tipo - For profiles type Alpha 255 ALU.K N 53 Complanare COD. 02581 N Materiale - Material Nylon nero - Black nylon 0,02620 - Per serrature serie - For locks series cod. 330-332-338-350-352-358-4330-4338-4350-4530-530-540 Per profili tipo - For profiles type Alpha 255 ALU.K N 53 Complanare COD. 02586 N Materiale - Material Nylon nero - Black nylon 0,02520 - Per serrature serie - For locks series cod. 11141-11148-11171-11178-1161-1171-1181-1261-1271-1281-1431-1441-14511461-1471-1481-1561-1571-1581-1661-1671-1681-1941-1948-1971-1978-4114141148-41171-41178-4431-4441-4451-4461-4471-4481-4941-4948-4971-49785931-5941-5948-5951-5961-5971-5978-5981 Per deviatori serie - For deviators series cod. 0661-0662 Per profili tipo - For profiles type Alpha 255 ALU.K N 53 Complanare 264 COD. 02594 N Materiale - Material Nylon nero - Black nylon 0,01820 - Contropiastre in nylon Nylon striking plates Per serrature serie - For locks series cod. 100020-100025-100030-100035-100040-100045-100050-100055-100060-100065100120-100125-100130-100135-100140-100145-100150-100155-100160-1001651160-1165-1167-1170-1175-1177-1180-1185-1187-1260-1265-1267-1270-12751277-1280-1285-1287-1430-1435-1437-14379-1440-1445-1447-14479-1450-14551457-14579-1460-1465-1467-1470-1475-1477-1480-1485-1487-1560-1565-15671570-1575-1577-1580-1585-1587-1660-1665-1667-1670-1675-1677-1680-16851687-4430-4435-4437-44379-4440-4445-4447-44479-4450-4455-4457-445794460-4465-4467-4470-4475-4477-4480-4485-4487-5930-5935-5960-5965 Per profili tipo - For profiles type Alpha 255 ALU.K N 53 Complanare COD. 02596 N Materiale - Material Nylon nero - Black nylon 0,02720 - Per serrature serie - For locks series cod. 11140-11145-11170-11175-1168-1178-1188-1268-1278-1288-1438-1439-14481449-1458-1459-1468-1478-1488-1568-1578-1588-1668-1678-1688-1940-19451970-1975-41140-41145-41170-41175-4438-4439-4448-4449-4458-4459-44684478-4488-4940-4945-4970-4975-5938-5940-5945-5950-5968-5970-5975-5980 Per profili tipo - For profiles type Alpha 255 ALU.K N 53 Complanare COD. 02598 N Materiale - Material Nylon nero - Black nylon 0,02620 - Per serrature serie - For locks series cod. 100021-100031-100041-100051-100061-100121-100131-100141-100151100161-1770-1771-1777-1780-1781-1785-327-334-335-337-339-351-354-355357-359-370-371-377-378-380-381-382-385-388-390-391-395-399-4335-43394355-4531-531-541-770-771-777-778-780-781-782-785-788-790-791-795-799870-871-877-878-880-881-882-885-888-890-891-895-899-990-991-995-999 Per profili tipo - For profiles type Domal stopper PG Porta NC 45 Int. Porta COD. 02681 N Materiale - Material Nylon nero - Black nylon 0,01820 - 265 Contropiastre in nylon Nylon striking plates Per serrature serie - For locks series cod. 330-332-338-350-352-358-4330-4338-4350-4530-530-540 Per profili tipo - For profiles type Domal stopper PG Porta NC 45 Int. Porta COD. 02686 N Materiale - Material Nylon nero - Black nylon 0,01820 - Per serrature serie - For locks series cod. 11141-11148-11171-11178-1161-1171-1181-1261-1271-1281-1431-1441-14511461-1471-1481-1561-1571-1581-1661-1671-1681-1941-1948-1971-1978-4114141148-41171-41178-4431-4441-4451-4461-4471-4481-4941-4948-4971-49785931-5941-5948-5951-5961-5971-5978-5981 Per deviatori serie - For deviators series cod. 0661-0662 Per profili tipo - For profiles type Domal stopper PG Porta NC 45 Int. Porta COD. 02694 N Materiale - Material Nylon nero - Black nylon 0,01120 - Per serrature serie - For locks series cod. 100020-100025-100030-100035-100040-100045-100050-100055-100060-100065100120-100125-100130-100135-100140-100145-100150-100155-100160-1001651160-1165-1167-1170-1175-1177-1180-1185-1187-1260-1265-1267-1270-12751277-1280-1285-1287-1430-1435-1437-14379-1440-1445-1447-14479-1450-14551457-14579-1460-1465-1467-1470-1475-1477-1480-1485-1487-1560-1565-15671570-1575-1577-1580-1585-1587-1660-1665-1667-1670-1675-1677-1680-16851687-4430-4435-4437-44379-4440-4445-4447-44479-4450-4455-4457-445794460-4465-4467-4470-4475-4477-4480-4485-4487-5930-5935-5960-5965 Per profili tipo - For profiles type Domal stopper PG Porta NC 45 Int. Porta 266 COD. 02696 N Materiale - Material Nylon nero - Black nylon 0,01920 - Contropiastre in nylon Nylon striking plates Per serrature serie - For locks series cod. 11140-11145-11170-11175-1168-1178-1188-1268-1278-1288-1438-1439-14481449-1458-1459-1468-1478-1488-1568-1578-1588-1668-1678-1688-1940-19451970-1975-41140-41145-41170-41175-4438-4439-4448-4449-4458-4459-44684478-4488-4940-4945-4970-4975-5938-5940-5945-5950-5968-5970-5975-5980 Per profili tipo - For profiles type Domal stopper PG Porta NC 45 Int. Porta COD. 02698 N Materiale - Material Nylon nero - Black nylon 0,01820 - Per serrature serie - For locks series cod. 100021-100031-100041-100051-100061-100121-100131-100141-100151100161-1770-1771-1777-1780-1781-1785-327-334-335-337-339-351-354-355357-359-370-371-377-378-380-381-382-385-388-390-391-395-399-4335-43394355-4531-531-541-770-771-777-778-780-781-782-785-788-790-791-795-799870-871-877-878-880-881-882-885-888-890-891-895-899-990-991-995-999 Per profili tipo - For profiles type R 40, R 50 COD. 02881 N Materiale - Material Nylon nero - Black nylon 0,02420 - Per serrature serie - For locks series cod. 330-332-338-350-352-358-4330-4338-4350-4530-530-540 Per profili tipo - For profiles type R 40, R 50 COD. 02886 N Materiale - Material Nylon nero - Black nylon 0,02420 - 267 Contropiastre in nylon Nylon striking plates Per serrature serie - For locks series cod. 1775-320-322-328-340-342-345-348-375-4320-4328-4340-4535-535-545-775-875 Per profili tipo - For profiles type R 40, R 50 COD. 02887 N Materiale - Material Nylon nero - Black nylon 0,03220 - Per serrature serie - For locks series cod. 11141-11148-11171-11178-1161-1171-1181-1261-1271-1281-1431-1441-14511461-1471-1481-1561-1571-1581-1661-1671-1681-1941-1948-1971-1978-4114141148-41171-41178-4431-4441-4451-4461-4471-4481-4941-4948-4971-49785931-5941-5948-5951-5961-5971-5978-5981 Per deviatori serie - For deviators series cod. 0661-0662 Per profili tipo - For profiles type R 40, R 50 COD. 02894 N Materiale - Material Nylon nero - Black nylon 0,01320 - Per serrature serie - For locks series cod. 100020-100025-100030-100035-100040-100045-100050-100055-100060-100065100120-100125-100130-100135-100140-100145-100150-100155-100160-1001651160-1165-1167-1170-1175-1177-1180-1185-1187-1260-1265-1267-1270-12751277-1280-1285-1287-1430-1435-1437-14379-1440-1445-1447-14479-1450-14551457-14579-1460-1465-1467-1470-1475-1477-1480-1485-1487-1560-1565-15671570-1575-1577-1580-1585-1587-1660-1665-1667-1670-1675-1677-1680-16851687-4430-4435-4437-44379-4440-4445-4447-44479-4450-4455-4457-445794460-4465-4467-4470-4475-4477-4480-4485-4487-5930-5935-5960-5965 Per profili tipo - For profiles type R 40, R 50 COD. 02896 N 268 Materiale - Material Nylon nero - Black nylon 0,01920 - Contropiastre in nylon Nylon striking plates Per serrature serie - For locks series cod. 11140-11145-11170-11175-1168-1178-1188-1268-1278-1288-1438-1439-14481449-1458-1459-1468-1478-1488-1568-1578-1588-1668-1678-1688-1940-19451970-1975-41140-41145-41170-41175-4438-4439-4448-4449-4458-4459-44684478-4488-4940-4945-4970-4975-5938-5940-5945-5950-5968-5970-5975-5980 Per profili tipo - For profiles type R 40, R 50 COD. 02898 N Materiale - Material Nylon nero - Black nylon 0,02120 - Per serrature serie - For locks series cod. 100021-100031-100041-100051-100061-100121-100131-100141-100151100161-1770-1771-1777-1780-1781-1785-327-334-335-337-339-351-354-355357-359-370-371-377-378-380-381-382-385-388-390-391-395-399-4335-43394355-4531-531-541-770-771-777-778-780-781-782-785-788-790-791-795-799870-871-877-878-880-881-882-885-888-890-891-895-899-990-991-995-999 Per profili tipo - For profiles type Nuovo NC 40 Sormonto 1 anta COD. 02981 N Materiale - Material Nylon nero - Black nylon 0,01920 - Per serrature serie - For locks series cod. 330-332-338-350-352-358-4330-4338-4350-4530-530-540 Per profili tipo - For profiles type Nuovo NC 40 Sormonto 1 anta COD. 02986 N Materiale - Material Nylon nero - Black nylon 0,01820 - 269 Contropiastre in nylon Nylon striking plates Per serrature serie - For locks series cod. 11141-11148-11171-11178-1161-1171-1181-1261-1271-1281-1431-1441-14511461-1471-1481-1561-1571-1581-1661-1671-1681-1941-1948-1971-1978-4114141148-41171-41178-4431-4441-4451-4461-4471-4481-4941-4948-4971-49785931-5941-5948-5951-5961-5971-5978-5981 Per deviatori serie - For deviators series cod. 0661-0662 Per profili tipo - For profiles type Nuovo NC 40 Sormonto 1 anta COD. 02994 N Materiale - Material Nylon nero - Black nylon 0,00920 - Per serrature serie - For locks series cod. 100020-100025-100030-100035-100040-100045-100050-100055-100060-100065100120-100125-100130-100135-100140-100145-100150-100155-100160-1001651160-1165-1167-1170-1175-1177-1180-1185-1187-1260-1265-1267-1270-12751277-1280-1285-1287-1430-1435-1437-14379-1440-1445-1447-14479-1450-14551457-14579-1460-1465-1467-1470-1475-1477-1480-1485-1487-1560-1565-15671570-1575-1577-1580-1585-1587-1660-1665-1667-1670-1675-1677-1680-16851687-4430-4435-4437-44379-4440-4445-4447-44479-4450-4455-4457-445794460-4465-4467-4470-4475-4477-4480-4485-4487-5930-5935-5960-5965 Per profili tipo - For profiles type Nuovo NC 40 Sormonto 1 anta COD. 02996 N Materiale - Material Nylon nero - Black nylon 0,01520 - Per serrature serie - For locks series cod. 11140-11145-11170-11175-1168-1178-1188-1268-1278-1288-1438-1439-14481449-1458-1459-1468-1478-1488-1568-1578-1588-1668-1678-1688-1940-19451970-1975-41140-41145-41170-41175-4438-4439-4448-4449-4458-4459-44684478-4488-4940-4945-4970-4975-5938-5940-5945-5950-5968-5970-5975-5980 Per profili tipo - For profiles type Nuovo NC 40 Sormonto 1 anta 270 COD. 02998 N Materiale - Material Nylon nero - Black nylon 0,01520 - Contropiastre in nylon Nylon striking plates Per serrature serie - For locks series cod. 100021-100031-100041-100051-100061-100121-100131-100141-100151100161-1770-1771-1777-1780-1781-1785-327-334-335-337-339-351-354-355357-359-370-371-377-378-380-381-382-385-388-390-391-395-399-4335-43394355-4531-531-541-770-771-777-778-780-781-782-785-788-790-791-795-799870-871-877-878-880-881-882-885-888-890-891-895-899-990-991-995-999 Per profili tipo - For profiles type All.co 5 Sormonto COD. 03281 N Materiale - Material Nylon nero - Black nylon 0,03120 - Per serrature serie - For locks series cod. 330-332-338.350-352-358-4330-4338-4350-4530-530-540 Per profili tipo - For profiles type All.co 5 Sormonto COD. 03286 N Materiale - Material Nylon nero - Black nylon 0,03420 - Per serrature serie - For locks series cod. 11141-11148-11171-11178-1161-1171-1181-1261-1271-1281-1431-1441-14511461-1471-1481-1561-1571-1581-1661-1671-1681-1941-1948-1971-1978-4114141148-41171-41178-4431-4441-4451-4461-4471-4481-4941-4948-4971-49785931-5941-5948-5951-5961-5971-5978-5981 Per deviatori serie - For deviators series cod. 0661-0662 Per profili tipo - For profiles type All.co 5 Sormonto COD. 03294 N Materiale - Material Nylon nero - Black nylon 0,01720 - 271 Contropiastre in nylon Nylon striking plates Per serrature serie - For locks series cod. 100020-100025-100030-100035-100040-100045-100050-100055-100060-100065100120-100125-100130-100135-100140-100145-100150-100155-100160-1001651160-1165-1167-1170-1175-1177-1180-1185-1187-1260-1265-1267-1270-12751277-1280-1285-1287-1430-1435-1437-14379-1440-1445-1447-14479-1450-14551457-14579-1460-1465-1467-1470-1475-1477-1480-1485-1487-1560-1565-15671570-1575-1577-1580-1585-1587-1660-1665-1667-1670-1675-1677-1680-16851687-4430-4435-4437-44379-4440-4445-4447-44479-4450-4455-4457-445794460-4465-4467-4470-4475-4477-4480-4485-4487-5930-5935-5960-5965 Per profili tipo - For profiles type All.co 5 Sormonto COD. 03296 N Materiale - Material Nylon nero - Black nylon 0,02820 - Per serrature serie - For locks series cod. 11140-11145-11170-11175-1168-1178-1188-1268-1278-1288-1438-1439-14481449-1458-1459-1468-1478-1488-1568-1578-1588-1668-1678-1688-1940-19451970-1975-41140-41145-41170-41175-4438-4439-4448-4449-4458-4459-44684478-4488-4940-4945-4970-4975-5938-5940-5945-5950-5968-5970-5975-5980 Per profili tipo - For profiles type All.co 5 Sormonto COD. 03298 N Materiale - Material Nylon nero - Black nylon 0,03020 - Per serrature serie - For locks series cod. 100021-100031-100041-100051-100061-100121-100131-100141-100151100161-1770-1771-1777-1780-1781-1785-327-334-335-337-339-351-354-355357-359-370-371-377-378-380-381-382-385-388-390-391-395-399-4335-43394355-4531-531-541-770-771-777-778-780-781-782-785-788-790-791-795-799870-871-877-878-880-881-882-885-888-890-891-895-899-990-991-995-999 Per profili tipo - For profiles type R 50 COD. 03581 N 272 Materiale - Material Nylon nero - Black nylon 0,03410 - Contropiastre in nylon Nylon striking plates Per serrature serie - For locks series cod. 330-332-338-350-352-358-4330-4338-4350-4530-530-540 Per profili tipo - For profiles type R 50 COD. 03586 N Materiale - Material Nylon nero - Black nylon 0,03010 - Regolazione orizzontale - Horizontal adjustment Per serrature serie - For locks series NEW cod. 100021-100031-100041-100051-100061-100121-100131-100141-100151100161-1770-1771-1777-1780-1781-1785-327-334-335-337-339-351-354-355357-359-370-371-377-378-380-381-382-385-388-390-391-395-399-4335-43394355-4531-531-541-770-771-777-778-780-781-782-785-788-790-791-795-799870-871-877-878-880-881-882-885-888-890-891-895-899-990-991-995-999 Per profili tipo - For profiles type R 40, R50, Domal stopper COD. PG Finestra, nuovo NC 40 sormonto 2 ante con riporto 03781 N Materiale - Material Nylon nero - Black nylon 0,01810 - Regolazione orizzontale - Horizontal adjustment Per serrature serie - For locks series NEW cod. 100021-100031-100041-100051-100061-100121-100131-100141-100151100161-1771-1777-327-337-351-357-371-377-380-381-385-388-390-391-395399-771-777-780-781-785-788-790-791-795-799-871-877-880-881-885-888-890891-895-899-990-991-995-999 Per profili tipo - For profiles type R 40, R50, Domal stopper COD. PG Finestra, nuovo NC 40 sormonto 2 ante con riporto 03783 N Materiale - Material Nylon nero - Black nylon 0,02210 - 273 Contropiastre in nylon Nylon striking plates Per serrature serie - For locks series cod. 100021-100031-100041-100051-100061-100121-100131-100141-100151100161-1770-1771-1777-1780-1781-1785-327-334-335-337-339-351-354-355357-359-370-371-377-378-380-381-382-385-388-390-391-395-399-4335-43394355-4531-531-541-770-771-777-778-780-781-782-785-788-790-791-795-799870-871-877-878-880-881-882-885-888-890-891-895-899-990-991-995-999 Per profili tipo - For profiles type GR 9 COD. 04051 N Materiale - Material Nylon nero - Black nylon 0,02620 - Per serrature serie - For locks series cod. 100021-100031-100041-100051-100061-100121-100131-100141-100151100161-1771-1777-327-337-351-357-371-377-380-381-385-388-390-391-395399-771-777-780-781-785-788-790-791-795-799-871-877-880-881-885-888-890891-895-899-990-991-995-999 Per profili tipo - For profiles type GR 9 COD. 04053 N Materiale - Material Nylon nero - Black nylon 0,02920 - Per serrature serie - For locks series cod. 330-332-338-350-352-358-4330-4338-4350-4530-530-540 Per profili tipo - For profiles type GR 9 COD. 04056 N 274 Materiale - Material Nylon nero - Black nylon 0,02420 - Contropiastre in nylon Nylon striking plates Per serrature serie - For locks series cod. 1775-320-322-328-340-342-345-348-375-4320-4328-4340-4535-535-545-775-875 Per profili tipo - For profiles type GR 9 COD. 04057 N Materiale - Material Nylon nero - Black nylon 0,02520 - Per serrature serie - For locks series cod. 100021-100031-100041-100051-100061-100121-100131-100141-100151100161-1770-1771-1777-1780-1781-1785-327-334-335-337-339-351-354-355357-359-370-371-377-378-380-381-382-385-388-390-391-395-399-4335-43394355-4531-531-541-770-771-777-778-780-781-782-785-788-790-791-795-799870-871-877-878-880-881-882-885-888-890-891-895-899-990-991-995-999 Per profili tipo - For profiles type NC 40 COD. 04061 N Materiale - Material Nylon nero - Black nylon 0,02120 - Per serrature serie - For locks series cod. 100021-100031-100041-100051-100061-100121-100131-100141-100151100161-1771-1777-327-337-351-357-371-377-380-381-385-388-390-391-395399-771-777-780-781-785-788-790-791-795-799-871-877-880-881-885-888-890891-895-899-990-991-995-999 Per profili tipo - For profiles type NC 40 COD. 04063 N Materiale - Material Nylon nero - Black nylon 0,01720 - 275 Contropiastre in nylon Nylon striking plates Per serrature serie - For locks series cod. 330-332-338-350-352-358-4330-4338-4350-4530-530-540 Per profili tipo - For profiles type NC 40 COD. 04066 N Materiale - Material Nylon nero - Black nylon 0,02120 - Per serrature serie - For locks series cod. 1775-320-322-328-340-342-345-348-375-4320-4328-4340-4535-535-545-775-875 Per profili tipo - For profiles type NC 40 COD. 04067 N Materiale - Material Nylon nero - Black nylon 0,02120 - Per serrature serie - For locks series cod. 11141-11148-11171-11178-1161-1171-1181-1261-1271-1281-1431-1441-14511461-1471-1481-1561-1571-1581-1661-1671-1681-1941-1948-1971-1978-4114141148-41171-41178-4431-4441-4451-4461-4471-4481-4941-4948-4971-49785931-5941-5948-5951-5961-5971-5978-5981 Per deviatori serie - For deviators series cod. 0661-0662 Per profili tipo - For profiles type NC 40 COD. 04094 N 276 Materiale - Material Nylon nero - Black nylon 0,01120 - Contropiastre in nylon Nylon striking plates Per serrature serie - For locks series cod. 100020-100025-100030-100035-100040-100045-100050-100055-100060-100065100120-100125-100130-100135-100140-100145-100150-100155-100160-1001651160-1165-1167-1170-1175-1177-1180-1185-1187-1260-1265-1267-1270-12751277-1280-1285-1287-1430-1435-1437-14379-1440-1445-1447-14479-1450-14551457-14579-1460-1465-1467-1470-1475-1477-1480-1485-1487-1560-1565-15671570-1575-1577-1580-1585-1587-1660-1665-1667-1670-1675-1677-1680-16851687-4430-4435-4437-44379-4440-4445-4447-44479-4450-4455-4457-445794460-4465-4467-4470-4475-4477-4480-4485-4487-5930-5935-5960-5965 Per profili tipo - For profiles type NC 40 COD. 04096 N Materiale - Material Nylon nero - Black nylon 0,01620 - Per serrature serie - For locks series cod. 11140-11145-11170-11175-1168-1178-1188-1268-1278-1288-1438-1439-14481449-1458-1459-1468-1478-1488-1568-1578-1588-1668-1678-1688-1940-19451970-1975-41140-41145-41170-41175-4438-4439-4448-4449-4458-4459-44684478-4488-4940-4945-4970-4975-5938-5940-5945-5950-5968-5970-5975-5980 Per profili tipo - For profiles type NC 40 COD. 04098 N Materiale - Material Nylon nero - Black nylon 0,02020 - Per serrature serie - For locks series cod. 100021-100031-100041-100051-100061-100121-100131-100141-100151100161-1770-1771-1777-1780-1781-1785-327-334-335-337-339-351-354-355357-359-370-371-377-378-380-381-382-385-388-390-391-395-399-4335-43394355-4531-531-541-770-771-777-778-780-781-782-785-788-790-791-795-799870-871-877-878-880-881-882-885-888-890-891-895-899-990-991-995-999 Per profili tipo - For profiles type GR 12 COD. 05051 N Materiale - Material Nylon nero - Black nylon 0,03220 - 277 Contropiastre in nylon Nylon striking plates Per serrature serie - For locks series cod. 330-332-338-350-352-358-4330-4338-4350-4530-530-540 Per profili tipo - For profiles type GR 12 COD. 05056 N Materiale - Material Nylon nero - Black nylon 0,03020 - Per serrature serie - For locks series cod. 100021-100031-100041-100051-100061-100121-100131-100141-100151100161-1770-1771-1777-1780-1781-1785-327-334-335-337-339-351-354-355357-359-370-371-377-378-380-381-382-385-388-390-391-395-399-4335-43394355-4531-531-541-770-771-777-778-780-781-782-785-788-790-791-795-799870-871-877-878-880-881-882-885-888-890-891-895-899-990-991-995-999 Per profili tipo - For profiles type NC 50 B COD. 05061 N Materiale - Material Nylon nero - Black nylon 0,02320 - Per serrature serie - For locks series cod. 100021-100031-100041-100051-100061-100121-100131-100141-100151100161-1771-1777-327-337-351-357-371-377-380-381-385-388-390-391-395399-771-777-780-781-785-788-790-791-795-799-871-877-880-881-885-888-890891-895-899-990-991-995-999 Per profili tipo - For profiles type NC 50 B COD. 05063 N 278 Materiale - Material Nylon nero - Black nylon 0,03020 - Contropiastre in nylon Nylon striking plates Per serrature serie - For locks series cod. 330-332-338-350-352-358-4330-4338-4350-4530-530-540 Per profili tipo - For profiles type NC 50 B COD. 05066 N Materiale - Material Nylon nero - Black nylon 0,02720 - Per serrature serie - For locks series cod. 1775-320-322-328-340-342-345-348-375-4320-4328-4340-4535-535-545-775-875 Per profili tipo - For profiles type NC 50 B COD. 05067 N Materiale - Material Nylon nero - Black nylon 0,02420 - Per serrature serie - For locks series cod. 11141-11148-11171-11178-1161-1171-1181-1261-1271-1281-1431-1441-14511461-1471-1481-1561-1571-1581-1661-1671-1681-1941-1948-1971-1978-4114141148-41171-41178-4431-4441-4451-4461-4471-4481-4941-4948-4971-49785931-5941-5948-5951-5961-5971-5978-5981 Per deviatori serie - For deviators series cod. 0661-0662 Per profili tipo - For profiles type NC 50 B COD. 05094 N Materiale - Material Nylon nero - Black nylon 0,01420 - 279 Contropiastre in nylon Nylon striking plates Per serrature serie - For locks series cod. 100020-100025-100030-100035-100040-100045-100050-100055-100060-100065100120-100125-100130-100135-100140-100145-100150-100155-100160-1001651160-1165-1167-1170-1175-1177-1180-1185-1187-1260-1265-1267-1270-12751277-1280-1285-1287-1430-1435-1437-14379-1440-1445-1447-14479-1450-14551457-14579-1460-1465-1467-1470-1475-1477-1480-1485-1487-1560-1565-15671570-1575-1577-1580-1585-1587-1660-1665-1667-1670-1675-1677-1680-16851687-4430-4435-4437-44379-4440-4445-4447-44479-4450-4455-4457-445794460-4465-4467-4470-4475-4477-4480-4485-4487-5930-5935-5960-5965 Per profili tipo - For profiles type NC 50 B COD. 05096 N Materiale - Material Nylon nero - Black nylon 0,02220 - Per serrature serie - For locks series cod. 11140-11145-11170-11175-1168-1178-1188-1268-1278-1288-1438-1439-14481449-1458-1459-1468-1478-1488-1568-1578-1588-1668-1678-1688-1940-19451970-1975-41140-41145-41170-41175-4438-4439-4448-4449-4458-4459-44684478-4488-4940-4945-4970-4975-5938-5940-5945-5950-5968-5970-5975-5980 Per profili tipo - For profiles type NC 50 B COD. 05098 N 280 Materiale - Material Nylon nero - Black nylon 0,02120 - 281 Contropiastre in metallo Metal striking plates Per serrature serie - For locks series cod. 11140-11141-11145-11148-11170-11171-11175-11178-1940-1941-1945-19481970-1971-1975-1978-41140-41141-41145-41148-41170-41171-41175-411784940-4941-4945-4948-4970-4971-4975-4978-5930-5931-5935-5938-5940-59415945-5948-5950-5951-5960-5961-5965-5968-5970-5971-5975-5978-5980-5981 Per profili tipo - For profiles type All.co 5 COD. Materiale - Material 02121 L Lega speciale verniciata - Painted special alloy 0,15120 - Per serrature serie - For locks series cod. 100021-100031-100041-100051-100061-100121-100131-100141-100151100161-1770-1771-1777-1780-1781-1785-327-334-335-337-339-351-354-355357-359-370-371-377-378-380-381-382-385-388-390-391-395-399-4335-43394355-4531-531-541-770-771-777-778-780-781-782-785-788-790-791-795-799870-871-877-878-880-881-882-885-888-890-891-895-899-990-991-995-999 Per profili tipo - For profiles type All.co 5 COD. Materiale - Material 02181 L Lega speciale verniciata - Painted special alloy 0,13620 - Per serrature serie - For locks series cod. 1161-1171-1181-1261-1271-1281-1431-1441-1451-1461-1471-1481-1561-15711581-1661-1671-1681-4431-4441-4451-4461-4471-4481 Per deviatori serie - For deviators series cod. 0661-0662 Per profili tipo - For profiles type All.co 5 COD. 02194 L 282 Materiale - Material Lega speciale verniciata - Painted special alloy0,05320 - Contropiastre in metallo Metal striking plates Per serrature serie - For locks series cod. 100020-100025-100030-100035-100040-100045-100050-100055-100060100065-100120-100125-100130-100135-100140-100145-100150-100155100160-100165-1160-1165-1167-1170-1175-1177-1180-1185-1187-1260-12651267-1270-1275-1277-1280-1285-1287-1430-1435-1437-14379-1440-1445-144714479-1450-1455-1457-14579-1460-1465-1467-1470-1475-1477-1480-14851487-1560-1565-1567-1570-1575-1577-1580-1585-1587-1660-1665-1667-16701675-1677-1680-1685-1687-4430-4435-4437-44379-4440-4445-4447-444794450-4455-4457-44579-4460-4465-4467-4470-4475-4477-4480-4485-4487 Per profili tipo - For profiles type All.co 5 COD. 02196 L Materiale - Material Lega speciale verniciata - Painted special alloy0,14320 - Per serrature serie - For locks series cod. 1168-1178-1188-1268-1278-1288-1438-1439-1448-1449-1458-1459-1468-1478 1488-1568-1578-1588-1668-1678-1688-4438-4439-4448-4449-4458-4459-4468 4478-4488 Per profili tipo - For profiles type All.co 5 COD. 02198 L Materiale - Material Lega speciale verniciata - Painted special alloy0,06320 - Per serrature serie - For locks series cod. 11141-11148-11171-11178-1161-1171-1181-1261-1271-1281-1431-1441-14511461-1471-1481-1561-1571-1581-1661-1671-1681-1941-1948-1971-1978-4114141148-41171-41178-4431-4441-4451-4461-4471-4481-4941-4948-4971-49785931-5941-5948-5951-5961-5971-5978-5981 Per deviatori serie - For deviators series cod. 0661-0662 Per profili tipo - For profiles type Domal stopper PG Finestra NC 45 Int. Finestra COD. 02224 X Materiale - Material Acciaio inox - Stainless steel 0,05210 - 283 Contropiastre in metallo Metal striking plates Per serrature serie - For locks series cod. 100020-100025-100030-100035-100040-100045-100050-100055-100060-100065100120-100125-100130-100135-100140-100145-100150-100155-100160-1001651160-1165-1167-1170-1175-1177-1180-1185-1187-1260-1265-1267-1270-12751277-1280-1285-1287-1430-1435-1437-14379-1440-1445-1447-14479-1450-14551457-14579-1460-1465-1467-1470-1475-1477-1480-1485-1487-1560-1565-15671570-1575-1577-1580-1585-1587-1660-1665-1667-1670-1675-1677-1680-16851687-4430-4435-4437-44379-4440-4445-4447-44479-4450-4455-4457-445794460-4465-4467-4470-4475-4477-4480-4485-4487-5930-5935-5960-5965 Per profili tipo - For profiles type Domal stopper PG Finestra NC 45 Int. Finestra COD. 02226 X Materiale - Material Acciaio inox - Stainless steel 0,06810 - Per serrature serie - For locks series cod. 100021-100031-100041-100051-100061-100121-100131-100141-100151100161-1770-1771-1777-1780-1781-1785-327-334-335-337-339-351-354-355357-359-370-371-377-378-380-381-382-385-388-390-391-395-399-4335-43394355-4531-531-541-770-771-777-778-780-781-782-785-788-790-791-795-799870-871-877-878-880-881-882-885-888-890-891-895-899-990-991-995-999 Per profili tipo - For profiles type Domal stopper PG Finestra NC 45 Int. Finestra COD. 02381 L Materiale - Material Alluminio - Aluminium 0,07620 - Per serrature serie - For locks series cod. 330-332-338-350-352-358-4330-4338-4350-4530-530-540 Per profili tipo - For profiles type Domal stopper PG Finestra NC 45 Int. Finestra 284 COD. 02386 L Materiale - Material Alluminio - Aluminium 0,03520 - Contropiastre in metallo Metal striking plates Per serrature serie - For locks series cod. 11141-11148-11171-11178-1161-1171-1181-1261-1271-1281-1431-1441-14511461-1471-1481-1561-1571-1581-1661-1671-1681-1941-1948-1971-1978-4114141148-41171-41178-4431-4441-4451-4461-4471-4481-4941-4948-4971-49785931-5941-5948-5951-5961-5971-5978-5981 Per deviatori serie - For deviators series cod. 0661-0662 Per profili tipo - For profiles type Domal stopper PG Finestra NC 45 Int. Finestra COD. 02394 L Materiale - Material Alluminio - Aluminium 0,03520 - Per serrature serie - For locks series cod. 100020-100025-100030-100035-100040-100045-100050-100055-100060-100065100120-100125-100130-100135-100140-100145-100150-100155-100160-1001651160-1165-1167-1170-1175-1177-1180-1185-1187-1260-1265-1267-1270-12751277-1280-1285-1287-1430-1435-1437-14379-1440-1445-1447-14479-1450-14551457-14579-1460-1465-1467-1470-1475-1477-1480-1485-1487-1560-1565-15671570-1575-1577-1580-1585-1587-1660-1665-1667-1670-1675-1677-1680-16851687-4430-4435-4437-44379-4440-4445-4447-44479-4450-4455-4457-445794460-4465-4467-4470-4475-4477-4480-4485-4487-5930-5935-5960-5965 Per profili tipo - For profiles type Domal stopper PG Finestra NC 45 Int. Finestra COD. 02396 L Materiale - Material Alluminio - Aluminium 0,03820 - Per serrature serie - For locks series cod. 11140-11145-11170-11175-1168-1178-1188-1268-1278-1288-1438-1439-14481449-1458-1459-1468-1478-1488-1568-1578-1588-1668-1678-1688-1940-19451970-1975-41140-41145-41170-41175-4438-4439-4448-4449-4458-4459-44684478-4488-4940-4945-4970-4975-5938-5940-5945-5950-5968-5970-5975-5980 Per profili tipo - For profiles type Domal stopper PG Finestra NC 45 Int. Finestra COD. 02398 L Materiale - Material Alluminio - Aluminium 0,03820 - 285 Contropiastre in metallo Metal striking plates Per serrature serie - For locks series NEW cod. 1731 - 1741 Per deviatori serrature multipunto ad ingranaggi - For deviators of vertical multi-point locks with gear mechanism movements COD. 02474 XU Materiale - Material Acciaio inox - Stainless steel 0,07710 - Per serrature serie - For locks series NEW cod. 1740 COD. 02476 XU Materiale - Material Acciaio inox - Stainless steel Per serrature serie - For locks series 0,08910 - NEW cod. 11061 - 11071 - 11081 - 1161 - 1171 - 1181 - 1261 - 1271 - 1281 - 1491 - 1496 - 1531 - 4491 - 4496 Per deviatori serrature multipunto - For multi-point locks deviators COD. 02494 XU 286 Materiale - Material Acciaio inox - Stainless steel 0,07210 - Contropiastre in metallo Metal striking plates Per serrature serie - For locks series NEW cod. 1260-1270-1280-1490-1495-4490-4495 COD. 02496 XU Materiale - Material Acciaio inox - Stainless steel 0,08410 - Per serrature serie - For locks series cod. 100021-100031-100041-100051-100061-100121-100131-100141-100151100161-1770-1771-1777-1780-1781-1785-327-334-335-337-339-351-354-355357-359-370-371-377-378-380-381-382-385-388-390-391-395-399-4335-43394355-4531-531-541-770-771-777-778-780-781-782-785-788-790-791-795-799870-871-877-878-880-881-882-885-888-890-891-895-899-990-991-995-999 Per profili tipo - For profiles type Domal Break PA 52 Porta NC 55 Int. Porta COD. 02681 L Materiale - Material Alluminio - Aluminium 0,05610 - Per serrature serie - For locks series cod. 330-332-338-350-352-358-4330-4338-4350-4530-530-540 Per profili tipo - For profiles type Domal Break PA 52 Porta NC 55 Int. Porta COD. 02686 L Materiale - Material Alluminio - Aluminium 0,05310 - 287 Contropiastre in metallo Metal striking plates Per serrature serie - For locks series cod. 11141-11148-11171-11178-1161-1171-1181-1261-1271-1281-1431-1441-14511461-1471-1481-1561-1571-1581-1661-1671-1681-1941-1948-1971-1978-4114141148-41171-41178-4431-4441-4451-4461-4471-4481-4941-4948-4971-49785931-5941-5948-5951-5961-5971-5978-5981 Per deviatori serie - For deviators series cod. 0661-0662 Per profili tipo - For profiles type Domal Break PA 52 Porta NC 55 Int. Porta COD. 02694 L Materiale - Material Alluminio - Aluminium 0,05310 - Per serrature serie - For locks series cod. 100020-100025-100030-100035-100040-100045-100050-100055-100060-100065100120-100125-100130-100135-100140-100145-100150-100155-100160-1001651160-1165-1167-1170-1175-1177-1180-1185-1187-1260-1265-1267-1270-12751277-1280-1285-1287-1430-1435-1437-14379-1440-1445-1447-14479-1450-14551457-14579-1460-1465-1467-1470-1475-1477-1480-1485-1487-1560-1565-15671570-1575-1577-1580-1585-1587-1660-1665-1667-1670-1675-1677-1680-16851687-4430-4435-4437-44379-4440-4445-4447-44479-4450-4455-4457-445794460-4465-4467-4470-4475-4477-4480-4485-4487-5930-5935-5960-5965 Per profili tipo - For profiles type Domal Break PA 52 Porta NC 55 Int. Porta COD. 02696 L Materiale - Material Alluminio - Aluminium 0,06010 - Per serrature serie - For locks series cod. 11140-11145-11170-11175-1168-1178-1188-1268-1278-1288-1438-1439-14481449-1458-1459-1468-1478-1488-1568-1578-1588-1668-1678-1688-1940-19451970-1975-41140-41145-41170-41175-4438-4439-4448-4449-4458-4459-44684478-4488-4940-4945-4970-4975-5938-5940-5945-5950-5968-5970-5975-5980 Per profili tipo - For profiles type Domal Break PA 52 Porta NC 55 Int. Porta 288 COD. 02698 L Materiale - Material Alluminio - Aluminium 0,05910 - Contropiastre in metallo Metal striking plates Per serrature serie - For locks series cod. 100021-100031-100041-100051-100061-100121-100131-100141-100151100161-1770-1771-1777-1780-1781-1785-327-334-335-337-339-351-354-355357-359-370-371-377-378-380-381-382-385-388-390-391-395-399-4335-43394355-4531-531-541-770-771-777-778-780-781-782-785-788-790-791-795-799870-871-877-878-880-881-882-885-888-890-891-895-899-990-991-995-999 Per profili tipo - For profiles type EKIP 40, 50 Complanare COD. 02781 L Materiale - Material Alluminio - Aluminium 0,06510 - Per serrature serie - For locks series cod. 330-332-338-350-352-358-4330-4338-4350-4530-530-540 Per profili tipo - For profiles type EKIP 40, 50 Complanare COD. 02786 L Materiale - Material Alluminio - Aluminium 0,07110 - Per serrature serie - For locks series cod. 11141-11148-11171-11178-1161-1171-1181-1261-1271-1281-1431-1441-14511461-1471-1481-1561-1571-1581-1661-1671-1681-1941-1948-1971-1978-4114141148-41171-41178-4431-4441-4451-4461-4471-4481-4941-4948-4971-49785931-5941-5948-5951-5961-5971-5978-5981 Per deviatori serie - For deviators series cod. 0661-0662 Per profili tipo - For profiles type EKIP 40, 50 Complanare COD. 02794 L Materiale - Material Alluminio - Aluminium 0,07110 - 289 Contropiastre in metallo Metal striking plates Per serrature serie - For locks series cod. 100020-100025-100030-100035-100040-100045-100050-100055-100060-100065100120-100125-100130-100135-100140-100145-100150-100155-100160-1001651160-1165-1167-1170-1175-1177-1180-1185-1187-1260-1265-1267-1270-12751277-1280-1285-1287-1430-1435-1437-14379-1440-1445-1447-14479-1450-14551457-14579-1460-1465-1467-1470-1475-1477-1480-1485-1487-1560-1565-15671570-1575-1577-1580-1585-1587-1660-1665-1667-1670-1675-1677-1680-16851687-4430-4435-4437-44379-4440-4445-4447-44479-4450-4455-4457-445794460-4465-4467-4470-4475-4477-4480-4485-4487-5930-5935-5960-5965 Per profili tipo - For profiles type EKIP 40, 50 Complanare COD. 02796 L Materiale - Material Alluminio - Aluminium 0,07010 - Per serrature serie - For locks series cod. 11140-11145-11170-11175-1168-1178-1188-1268-1278-1288-1438-1439-14481449-1458-1459-1468-1478-1488-1568-1578-1588-1668-1678-1688-1940-19451970-1975-41140-41145-41170-41175-4438-4439-4448-4449-4458-4459-44684478-4488-4940-4945-4970-4975-5938-5940-5945-5950-5968-5970-5975-5980 Per profili tipo - For profiles type EKIP 40, 50 Complanare COD. 02798 L Materiale - Material Alluminio - Aluminium 0,08010 - Per serrature serie - For locks series cod. 11140-11141-11145-11148-11170-11171-11175-11178-1940-1941-1945-19481970-1971-1975-1978-41140-41141-41145-41148-41170-41171-41175-411784940-4941-4945-4948-4970-4971-4975-4978-5930-5931-5935-5938-5940-59415945-5948-5950-5951-5960-5961-5965-5968-5970-5971-5975-5978-5980-5981 Per profili tipo - For profiles type R 40, R 50 COD. 02821 L 290 Materiale - Material Lega speciale verniciata - Painted special alloy0,13320 - Contropiastre in metallo Metal striking plates Per serrature serie - For locks series cod. 100021-100031-100041-100051-100061-100121-100131-100141-100151100161-1770-1771-1777-1780-1781-1785-327-334-335-337-339-351-354-355357-359-370-371-377-378-380-381-382-385-388-390-391-395-399-4335-43394355-4531-531-541-770-771-777-778-780-781-782-785-788-790-791-795-799870-871-877-878-880-881-882-885-888-890-891-895-899-990-991-995-999 Per profili tipo - For profiles type R 40, R 50 COD. 02881 L Materiale - Material Lega speciale verniciata - Painted special alloy0,11820 - Per serrature serie - For locks series cod. 1161-1171-1181-1261-1271-1281-1431-1441-1451-1461-1471-1481-1561-15711581-1661-1671-1681-4431-4441-4451-4461-4471-4481 Per deviatori serie - For deviators series cod. 0661-0662 Per profili tipo - For profiles type R 40, R 50 COD. 02894 L Materiale - Material Lega speciale verniciata - Painted special alloy 0,11220 - Per serrature serie - For locks series cod. 100020-100025-100030-100035-100040-100045-100050-100055-100060100065-100120-100125-100130-100135-100140-100145-100150-100155100160-100165-1160-1165-1167-1170-1175-1177-1180-1185-1187-1260-12651267-1270-1275-1277-1280-1285-1287-1430-1435-1437-14379-1440-1445-144714479-1450-1455-1457-14579-1460-1465-1467-1470-1475-1477-1480-14851487-1560-1565-1567-1570-1575-1577-1580-1585-1587-1660-1665-1667-16701675-1677-1680-1685-1687-4430-4435-4437-44379-4440-4445-4447-444794450-4455-4457-44579-4460-4465-4467-4470-4475-4477-4480-4485-4487 Per profili tipo - For profiles type R 40, R 50 COD. 02896 L Materiale - Material Lega speciale verniciata - Painted special alloy0,11920 - 291 Contropiastre in metallo Metal striking plates Per serrature serie - For locks series cod. 1168-1178-1188-1268-1278-1288-1438-1439-1448-1449-1458-1459-1468-1478 1488-1568-1578-1588-1668-1678-1688-4438-4439-4448-4449-4458-4459-4468 4478-4488 Per profili tipo - For profiles type R 40, R 50 COD. 02898 L Materiale - Material Lega speciale verniciata - Painted special alloy0,12720 - Per serrature serie - For locks series cod. 100021-100031-100041-100051-100061-100121-100131-100141-100151100161-1770-1771-1777-1780-1781-1785-327-334-335-337-339-351-354-355357-359-370-371-377-378-380-381-382-385-388-390-391-395-399-4335-43394355-4531-531-541-770-771-777-778-780-781-782-785-788-790-791-795-799870-871-877-878-880-881-882-885-888-890-891-895-899-990-991-995-999 Per profili tipo - For profiles type Domal stopper PG Porta NC 45 Int. Porta COD. 03181 L Materiale - Material Alluminio - Aluminium 0,07810 - Per serrature serie - For locks series cod. 330-332-338-350-352-358-4330-4338-4350-4530-530-540 Per profili tipo - For profiles type Domal stopper PG Porta NC 45 Int. Porta 292 COD. 03186 L Materiale - Material Alluminio - Aluminium 0,07310 - Contropiastre in metallo Metal striking plates Per serrature serie - For locks series cod. 11141-11148-11171-11178-1161-1171-1181-1261-1271-1281-1431-1441-14511461-1471-1481-1561-1571-1581-1661-1671-1681-1941-1948-1971-1978-4114141148-41171-41178-4431-4441-4451-4461-4471-4481-4941-4948-4971-49785931-5941-5948-5951-5961-5971-5978-5981 Per deviatori serie - For deviators series cod. 0661-0662 Per profili tipo - For profiles type Domal stopper PG Porta NC 45 Int. Porta COD. 03194 L Materiale - Material Alluminio - Aluminium 0,07510 - Per serrature serie - For locks series cod. 100020-100025-100030-100035-100040-100045-100050-100055-100060-100065100120-100125-100130-100135-100140-100145-100150-100155-100160-1001651160-1165-1167-1170-1175-1177-1180-1185-1187-1260-1265-1267-1270-12751277-1280-1285-1287-1430-1435-1437-14379-1440-1445-1447-14479-1450-14551457-14579-1460-1465-1467-1470-1475-1477-1480-1485-1487-1560-1565-15671570-1575-1577-1580-1585-1587-1660-1665-1667-1670-1675-1677-1680-16851687-4430-4435-4437-44379-4440-4445-4447-44479-4450-4455-4457-445794460-4465-4467-4470-4475-4477-4480-4485-4487-5930-5935-5960-5965 Per profili tipo - For profiles type Domal stopper PG Porta NC 45 Int. Porta COD. 03196 L Materiale - Material Alluminio - Aluminium 0,09310 - Per serrature serie - For locks series cod. 11140-11145-11170-11175-1168-1178-1188-1268-1278-1288-1438-1439-14481449-1458-1459-1468-1478-1488-1568-1578-1588-1668-1678-1688-1940-19451970-1975-41140-41145-41170-41175-4438-4439-4448-4449-4458-4459-44684478-4488-4940-4945-4970-4975-5938-5940-5945-5950-5968-5970-5975-5980 Per profili tipo - For profiles type Domal stopper PG Porta NC 45 Int. Porta COD. 03198 L Materiale - Material Alluminio - Aluminium 0,08510 - 293 Contropiastre in metallo Metal striking plates Per serrature serie - For locks series cod. 100021-100031-100041-100051-100061-100121-100131-100141-100151100161-1770-1771-1777-1780-1781-1785-327-334-335-337-339-351-354-355357-359-370-371-377-378-380-381-382-385-388-390-391-395-399-4335-43394355-4531-531-541-770-771-777-778-780-781-782-785-788-790-791-795-799870-871-877-878-880-881-882-885-888-890-891-895-899-990-991-995-999 Per profili tipo - For profiles type ALLIANCE Sistema A COD. 03381 L Materiale - Material Alluminio - Aluminium 0,08010 - Per serrature serie - For locks series cod. 330-332-338-350-352-358-4330-4338-4350-4530-530-540 Per profili tipo - For profiles type ALLIANCE Sistema A COD. 03386 L Materiale - Material Alluminio - Aluminium 0,03710 - Per serrature serie - For locks series cod. 11141-11148-11171-11178-1161-1171-1181-1261-1271-1281-1431-1441-14511461-1471-1481-1561-1571-1581-1661-1671-1681-1941-1948-1971-1978-4114141148-41171-41178-4431-4441-4451-4461-4471-4481-4941-4948-4971-49785931-5941-5948-5951-5961-5971-5978-5981 Per deviatori serie - For deviators series cod. 0661-0662 Per profili tipo - For profiles type ALLIANCE Sistema A COD. 03394 L 294 Materiale - Material Alluminio - Aluminium 0,07610 - Contropiastre in metallo Metal striking plates Per serrature serie - For locks series cod. 100020-100025-100030-100035-100040-100045-100050-100055-100060-100065100120-100125-100130-100135-100140-100145-100150-100155-100160-1001651160-1165-1167-1170-1175-1177-1180-1185-1187-1260-1265-1267-1270-12751277-1280-1285-1287-1430-1435-1437-14379-1440-1445-1447-14479-1450-14551457-14579-1460-1465-1467-1470-1475-1477-1480-1485-1487-1560-1565-15671570-1575-1577-1580-1585-1587-1660-1665-1667-1670-1675-1677-1680-16851687-4430-4435-4437-44379-4440-4445-4447-44479-4450-4455-4457-445794460-4465-4467-4470-4475-4477-4480-4485-4487-5930-5935-5960-5965 Per profili tipo - For profiles type ALLIANCE Sistema A COD. 03396 L Materiale - Material Alluminio - Aluminium 0,08510 - Per serrature serie - For locks series cod. 11140-11145-11170-11175-1168-1178-1188-1268-1278-1288-1438-1439-14481449-1458-1459-1468-1478-1488-1568-1578-1588-1668-1678-1688-1940-19451970-1975-41140-41145-41170-41175-4438-4439-4448-4449-4458-4459-44684478-4488-4940-4945-4970-4975-5938-5940-5945-5950-5968-5970-5975-5980 Per profili tipo - For profiles type ALLIANCE Sistema A COD. 03398 L Materiale - Material Alluminio - Aluminium 0,08210 - Per serrature serie - For locks series cod. 100021-100031-100041-100051-100061-100121-100131-100141-100151100161-1770-1771-1777-1780-1781-1785-327-334-335-337-339-351-354-355357-359-370-371-377-378-380-381-382-385-388-390-391-395-399-4335-43394355-4531-531-541-770-771-777-778-780-781-782-785-788-790-791-795-799870-871-877-878-880-881-882-885-888-890-891-895-899-990-991-995-999 Per profili tipo - For profiles type NC 40 COD. 04061 A Materiale - Material Acciaio plastificato - Plastic plated steel 0,06050 - 295 Contropiastre in metallo Metal striking plates Per serrature serie - For locks series cod. 100021-100031-100041-100051-100061-100121-100131-100141-100151100161-1771-1777-327-337-351-357-371-377-380-381-385-388-390-391-395399-771-777-780-781-785-788-790-791-795-799-871-877-880-881-885-888-890891-895-899-990-991-995-999 Per profili tipo - For profiles type NC 40 COD. 04063 A Materiale - Material Acciaio plastificato - Plastic plated steel 0,04650 - Per serrature serie - For locks series cod. 100021-100031-100041-100051-100061-100121-100131-100141-100151100161-1770-1771-1777-1780-1781-1785-327-334-335-337-339-351-354-355357-359-370-371-377-378-380-381-382-385-388-390-391-395-399-4335-43394355-4531-531-541-770-771-777-778-780-781-782-785-788-790-791-795-799870-871-877-878-880-881-882-885-888-890-891-895-899-990-991-995-999 Per profili tipo - For profiles type Export 50 T.T. Porta apertura esterna COD. 04481 L Materiale - Material Alluminio - Aluminium 0,07410 - Per serrature serie - For locks series cod. 330-332-338-350-352-358-4330-4338-4350-4530-530-540 Per profili tipo - For profiles type Export 50 T.T. Porta apertura esterna 296 COD. 04486 L Materiale - Material Alluminio - Aluminium 0,07110 - Contropiastre in metallo Metal striking plates Per serrature serie - For locks series cod. 11141-11148-11171-11178-1161-1171-1181-1261-1271-1281-1431-1441-14511461-1471-1481-1561-1571-1581-1661-1671-1681-1941-1948-1971-1978-4114141148-41171-41178-4431-4441-4451-4461-4471-4481-4941-4948-4971-49785931-5941-5948-5951-5961-5971-5978-5981 Per deviatori serie - For deviators series cod. 0661-0662 Per profili tipo - For profiles type Export 50 T.T. Porta apertura esterna COD. 04494 L Materiale - Material Alluminio - Aluminium 0,07110 - Per serrature serie - For locks series cod. 100020-100025-100030-100035-100040-100045-100050-100055-100060-100065100120-100125-100130-100135-100140-100145-100150-100155-100160-1001651160-1165-1167-1170-1175-1177-1180-1185-1187-1260-1265-1267-1270-12751277-1280-1285-1287-1430-1435-1437-14379-1440-1445-1447-14479-1450-14551457-14579-1460-1465-1467-1470-1475-1477-1480-1485-1487-1560-1565-15671570-1575-1577-1580-1585-1587-1660-1665-1667-1670-1675-1677-1680-16851687-4430-4435-4437-44379-4440-4445-4447-44479-4450-4455-4457-445794460-4465-4467-4470-4475-4477-4480-4485-4487-5930-5935-5960-5965 Per profili tipo - For profiles type Export 50 T.T. Porta apertura esterna COD. 04496 L Materiale - Material Alluminio - Aluminium 0,07910 - Per serrature serie - For locks series cod. 11140-11145-11170-11175-1168-1178-1188-1268-1278-1288-1438-1439-14481449-1458-1459-1468-1478-1488-1568-1578-1588-1668-1678-1688-1940-19451970-1975-41140-41145-41170-41175-4438-4439-4448-4449-4458-4459-44684478-4488-4940-4945-4970-4975-5938-5940-5945-5950-5968-5970-5975-5980 Per profili tipo - For profiles type Export 50 T.T. Porta apertura esterna COD. 04498 L Materiale - Material Alluminio - Aluminium 0,07910 - 297 Contropiastre in metallo Metal striking plates Per serrature serie - For locks series cod. 100021-100031-100041-100051-100061-100121-100131-100141-100151100161-1770-1771-1777-1780-1781-1785-327-334-335-337-339-351-354-355357-359-370-371-377-378-380-381-382-385-388-390-391-395-399-4335-43394355-4531-531-541-770-771-777-778-780-781-782-785-788-790-791-795-799870-871-877-878-880-881-882-885-888-890-891-895-899-990-991-995-999 Per profili tipo - For profiles type NC 50 B COD. 05061 A Materiale - Material Acciaio plastificato - Plastic plated steel 0,07725 - Per serrature serie - For locks series cod. 100021-100031-100041-100051-100061-100121-100131-100141-100151100161-1771-1777-327-337-351-357-371-377-380-381-385-388-390-391-395399-771-777-780-781-785-788-790-791-795-799-871-877-880-881-885-888-890891-895-899-990-991-995-999 Per profili tipo - For profiles type NC 50 B COD. 05063 A 298 Materiale - Material Acciaio plastificato - Plastic plated steel 0,06150 - 299 Contropiastre regolabili in acciaio inox Serie 023 X Stainless steel adjustable striking plates Per profili tipo - For profiles type Camera Europea serie finestra, Domal stopper PG finestra, NC 45 Int. finestra, Export 45 finestra, Nuovo NC 40 Sormonto 1 anta. Viti e camme INOX Stainless steel screws and cams Inserto per elettroserrature Electric locks device Vaschetta guida scrocco e rullo Latch bolt and roller bolt guide Piastra INOX satinata Plate in brush-polished stainless steel Vaschetta copri-spacco Housing cover Regolazione verticale Vertical adjustment Regolazione orizzontale Horizontal adjustment 300 Contropiastre regolabili in acciaio inox Stainless steel adjustable striking plates Per serrature serie - For locks series cod. 11140-11141-11145-11148-11170-11171-11175-11178-1940-1941-1945-19481970-1971-1975-1978-41140-41141-41145-41148-41170-41171-41175-411784940-4941-4945-4948-4970-4971-4975-4978-5930-5931-5935-5938-5940-59415945-5948-5950-5951-5960-5961-5965-5968-5970-5971-5975-5978-5980-5981 Per profili tipo - For profiles type Domal stopper PG Finestra NC 45 Int. Finestra COD. 02321 X Materiale - Material Acciaio inox - Stainless steel 0,12610 - Per serrature ad ingranaggi con catenaccio avanzante For locks with gear mechanism movements with advancing dead bolt cod. 1601-1611-1621-1631-1701-1721 Per deviatori serrature multipunto ad ingranaggi For deviators of vertical multi-point locks with gear mechanism movements Per profili tipo - For profiles type Domal stopper PG Finestra NC 45 Int. Finestra COD. 02374 X Materiale - Material Acciaio inox - Stainless steel 0,12310 - 301 Contropiastre regolabili in acciaio inox Stainless steel adjustable striking plates Per serrature ad ingranaggi con catenaccio avanzante For locks with gear mechanism movements with advancing dead bolt cod. 1600-1605-1610-1615-1620-1625-1630-1635-1700-1705-1720-1725 Per profili tipo - For profiles type Domal stopper PG Finestra NC 45 Int. Finestra COD. 02376 X Materiale - Material Acciaio inox - Stainless steel 0,13810 - Per serrature serie - For locks series cod. 100021-100031-100041-100051-100061-100121-100131-100141-100151100161-1770-1771-1775-1777-1780-1781-1785-327-334-335-337-339-351-354355-357-359-370-371-375-377-378-380-381-382-385-388-390-391-395-399-43354339-4355-4531-531-541-770-771-775-777-778-780-781-782-785-788-790-791795-799-870-871-875-877-878-880-881-882-885-888-890-891-895-899-990-991995-999 Per profili tipo - For profiles type Domal stopper PG Finestra NC 45 Int. Finestra 302 COD. 02381 X Materiale - Material Acciaio inox - Stainless steel 0,11210 - Contropiastre regolabili in acciaio inox Stainless steel adjustable striking plates Per serrature serie - For locks series cod. 1161-1171-1181-1261-1271-1281-1431-1441-1451-1461-1471-1481-1561-15711581-1661-1671-1681-4431-4441-4451-4461-4471-4481 Per deviatori serie - For deviators series cod. 0661-0662 Per profili tipo - For profiles type Domal stopper PG Finestra NC 45 Int. Finestra COD. 02394 X Materiale - Material Acciaio inox - Stainless steel 0,11810 - Per serrature serie - For locks series cod. 100020-100025-100030-100035-100040-100045-100050-100055-100060-100065100120-100125-100130-100135-100140-100145-100150-100155-100160-1001651160-1165-1167-1168-1170-1175-1177-1178-1180-1185-1187-1188-1260-1265-12671268-1270-1275-1277-1278-1280-1285-1287-1288-1430-1435-1437-14379-14381439-1440-1445-1447-14479-1448-1449-1450-1455-1457-14579-1458-1459-14601465-1467-1468-1470-1475-1477-1478-1480-1485-1487-1488-1560-1565-1567-15681570-1575-1577-1578-1580-1585-1587-1588-1660-1665-1667-1668-1670-1675-16771678-1680-1685-1687-1688-320-322-328-330-332-338-340-342-345-348-350-352358-4320-4328-4330-4338-4340-4350-4430-4435-4437-44379-4438-4439-4440-44454447-44479-4448-4449-4450-4455-4457-44579-4458-4459-4460-4465-4467-44684470-4475-4477-4478-4480-4485-4487-4488-4530-4535-530-535-540-545 Per profili tipo - For profiles type Domal stopper PG Finestra NC 45 Int. Finestra COD. 02396 X Materiale - Material Acciaio inox - Stainless steel 0,13310 - 303 Contropiastre regolabili in acciaio inox Serie 026 X Stainless steel adjustable striking plates Per profili tipo - For profiles type Domal break porte 52, NC65 STH porte, Export 50TT porte, ALU-K 62TT porte. Spessori per regolazione profondità Depht adjusting spacer Vaschetta guida rullo Roller bolt guide Viti INOX Stainless steel screws Vaschetta copri-spacco Housing cover Piastra INOX satinata Plate in brush-polished stainless steel Regolazione profondità Depht adjustable Regolazione orizzontale Horizontal adjustment 304 Contropiastre regolabili in acciaio inox Stainless steel adjustable striking plates Per serrature serie - For locks series cod. 11140-11141-11145-11148-11170-11171-11175-11178-1940-1941-1945-19481970-1971-1975-1978-41140-41141-41145-41148-41170-41171-41175-411784940-4941-4945-4948-4970-4971-4975-4978-5930-5931-5935-5938-5940-59415945-5948-5950-5951-5960-5961-5965-5968-5970-5971-5975-5978-5980-5981 Per profili tipo - For profiles type Domal Break PA 52 Porta Domal stopper PG Porta NC 55 Int. Porta NC 45 Int. Porta COD. 02621 X Materiale - Material Acciaio inox - Stainless steel 0,19310 - Per serrature ad ingranaggi con catenaccio avanzante For locks with gear mechanism movements with advancing dead bolt cod. 1601-1611-1621-1631-1701-1721 Per deviatori serrature multipunto ad ingranaggi For deviators of vertical multi-point locks with gear mechanism movements Per profili tipo - For profiles type Domal Break PA 52 Porta Domal stopper PG Porta NC 55 Int. Porta NC 45 Int. Porta COD. 02674 X Materiale - Material Acciaio inox - Stainless steel 0,16010 - 305 Contropiastre regolabili in acciaio inox Stainless steel adjustable striking plates Per serrature ad ingranaggi con catenaccio avanzante For locks with gear mechanism movements with advancing dead bolt cod. 1600-1605-1610-1615-1620-1625-1630-1635-1700-1705-1720-1725 Per profili tipo - For profiles type Domal Break PA 52 Porta Domal stopper PG Porta NC 55 Int. Porta NC 45 Int. Porta COD. 02676 X Materiale - Material Acciaio inox - Stainless steel 0,18810 - Per serrature serie - For locks series cod. 100021-100031-100041-100051-100061-100121-100131-100141-100151100161-1770-1771-1775-1777-1780-1781-1785-327-334-335-337-339-351-354355-357-359-370-371-375-377-378-380-381-382-385-388-390-391-395-399-43354339-4355-4531-531-541-770-771-775-777-778-780-781-782-785-788-790-791795-799-870-871-875-877-878-880-881-882-885-888-890-891-895-899-990-991995-999 Per profili tipo - For profiles type Domal Break PA 52 Porta Domal stopper PG Porta NC 55 Int. Porta NC 45 Int. Porta 306 COD. 02681 X Materiale - Material Acciaio inox - Stainless steel 0,15010 - Contropiastre regolabili in acciaio inox Stainless steel adjustable striking plates Per serrature serie - For locks series cod. 1161-1171-1181-1261-1271-1281-1431-1441-1451-1461-1471-1481-1561-15711581-1661-1671-1681-4431-4441-4451-4461-4471-4481 Per deviatori serie - For deviators series cod. 0661-0662 Per profili tipo - For profiles type Domal Break PA 52 Porta Domal stopper PG Porta NC 55 Int. Porta NC 45 Int. Porta COD. 02694 X Materiale - Material Acciaio inox - Stainless steel 0,15510 - Per serrature serie - For locks series cod. Per profili tipo - For profiles type Domal Break PA 52 Porta Domal stopper PG Porta NC 55 Int. Porta NC 45 Int. Porta 100020-100025-100030-100035-100040-100045-100050-100055-100060-100065100120-100125-100130-100135-100140-100145-100150-100155-100160-1001651160-1165-1167-1168-1170-1175-1177-1178-1180-1185-1187-1188-1260-1265-12671268-1270-1275-1277-1278-1280-1285-1287-1288-1430-1435-1437-14379-14381439-1440-1445-1447-14479-1448-1449-1450-1455-1457-14579-1458-1459-14601465-1467-1468-1470-1475-1477-1478-1480-1485-1487-1488-1560-1565-1567-15681570-1575-1577-1578-1580-1585-1587-1588-1660-1665-1667-1668-1670-1675-16771678-1680-1685-1687-1688-320-322-328-330-332-338-340-342-345-348-350-352358-4320-4328-4330-4338-4340-4350-4430-4435-4437-44379-4438-4439-4440-44454447-44479-4448-4449-4450-4455-4457-44579-4458-4459-4460-4465-4467-44684470-4475-4477-4478-4480-4485-4487-4488-4530-4535-530-535-540-545 COD. 02696 X Materiale - Material Acciaio inox - Stainless steel 0,18310 - 307 Contropiastre regolabili in acciaio inox Stainless steel adjustable striking plates Spessore laterale per contropiastre Lateral spacer for striking plates cod. 02621 X - 02676 X - 02696 X Per profili PORTE APERTURA ESTERNA tipo For external opening door profiles type NC 65 STH ALUK 62 TT EURO LINE 60 COD. 0740 N Materiale - Material Nylon nero - Black nylon 0,02610 - Spessore laterale per contropiastre Lateral spacer for striking plates cod. 02674 X - 02681 X - 02694 X Per profili PORTE APERTURA ESTERNA tipo For external opening door profiles type NC 65 STH ALUK 62 TT EURO LINE 60 COD. 0741 N Materiale - Material Nylon nero - Black nylon 0,02210 - Spessore laterale per contropiastre Lateral spacer for striking plates cod. 02621 X - 02676 X - 02696 X Per profili PORTE APERTURA ESTERNA tipo For external opening door profiles type DOMAL BREAK 52 NC 55 TH EXPORT 50 TT 308 COD. 0742 N Materiale - Material Nylon nero - Black nylon 0,03810 - Contropiastre regolabili in acciaio inox Stainless steel adjustable striking plates Spessore laterale per contropiastre Lateral spacer for striking plates cod. 02674 X - 02681 X - 02694 X Per profili PORTE APERTURA ESTERNA tipo For external opening door profiles type DOMAL BREAK 52 NC 55 TH EXPORT 50 TT COD. 0743 N Materiale - Material Nylon nero - Black nylon 0,03210 - Spessore laterale per contropiastre Lateral spacer for striking plates cod. 02621 X - 02676 X - 02696 X Per profili PORTE APERTURA ESTERNA tipo For external opening door profiles type ALUK 67IW COD. 0744 N Materiale - Material Nylon nero - Black nylon 0,03410 - Spessore laterale per contropiastre Lateral spacer for striking plates cod. 02674 X - 02681 X - 02694 X Per profili PORTE APERTURA ESTERNA tipo For external opening door profiles type ALUK 67IW COD. 0745 N Materiale - Material Nylon nero - Black nylon 0,02810 - 309 Contropiastre regolabili in acciaio inox Serie 028 X Stainless steel adjustable striking plates Per profili tipo - For profiles type R40, R50, NEW-TEC Viti e camme INOX Stainless steel screws and cams Inserto per elettroserrature Electric locks device Vaschetta guida scrocco e rullo Latch bolt and roller bolt guide Piastra INOX satinata Plate in brush-polished stainless steel Vaschetta copri-spacco Housing cover Regolazione verticale Vertical adjustment Regolazione orizzontale Horizontal adjustment 310 Contropiastre regolabili in acciaio inox Stainless steel adjustable striking plates Per serrature serie - For locks series cod. 11140-11141-11145-11148-11170-11171-11175-11178-1940-1941-1945-19481970-1971-1975-1978-41140-41141-41145-41148-41170-41171-41175-411784940-4941-4945-4948-4970-4971-4975-4978-5930-5931-5935-5938-5940-59415945-5948-5950-5951-5960-5961-5965-5968-5970-5971-5975-5978-5980-5981 Per profili tipo - For profiles type R 40, R 50 COD. 02821 X Materiale - Material Acciaio inox - Stainless steel 0,18010 - Per serrature ad ingranaggi con catenaccio avanzante For locks with gear mechanism movements with advancing dead bolt cod. 1601-1611-1621-1631-1701-1721 Per deviatori serrature multipunto ad ingranaggi For deviators of vertical multi-point locks with gear mechanism movements Per profili tipo - For profiles type R 40, R 50 COD. 02874 X Materiale - Material Acciaio inox - Stainless steel 0,16510 - 311 Contropiastre regolabili in acciaio inox Stainless steel adjustable striking plates Per serrature ad ingranaggi con catenaccio avanzante For locks with gear mechanism movements with advancing dead bolt cod. 1600-1605-1610-1615-1620-1625-1630-1635-1700-1705-1720-1725 Per profili tipo - For profiles type R 40, R 50 COD. 02876 X Materiale - Material Acciaio inox - Stainless steel 0,19010 - Per serrature serie - For locks series cod. 100021-100031-100041-100051-100061-100121-100131-100141-100151100161-1770-1771-1775-1777-1780-1781-1785-327-334-335-337-339-351-354355-357-359-370-371-375-377-378-380-381-382-385-388-390-391-395-399-43354339-4355-4531-531-541-770-771-775-777-778-780-781-782-785-788-790-791795-799-870-871-875-877-878-880-881-882-885-888-890-891-895-899-990-991995-999 Per profili tipo - For profiles type R 40, R 50 312 COD. 02881 X Materiale - Material Acciaio inox - Stainless steel 0,15410 - Contropiastre regolabili in acciaio inox Stainless steel adjustable striking plates Per serrature serie - For locks series cod. 1161-1171-1181-1261-1271-1281-1431-1441-1451-1461-1471-1481-1561-15711581-1661-1671-1681-4431-4441-4451-4461-4471-4481 Per deviatori serie - For deviators series cod. 0661-0662 Per profili tipo - For profiles type R 40, R 50 COD. 02894 X Materiale - Material Acciaio inox - Stainless steel 0,16010 - Per serrature serie - For locks series cod. 100020-100025-100030-100035-100040-100045-100050-100055-100060-100065100120-100125-100130-100135-100140-100145-100150-100155-100160-1001651160-1165-1167-1168-1170-1175-1177-1178-1180-1185-1187-1188-1260-1265-12671268-1270-1275-1277-1278-1280-1285-1287-1288-1430-1435-1437-14379-14381439-1440-1445-1447-14479-1448-1449-1450-1455-1457-14579-1458-1459-14601465-1467-1468-1470-1475-1477-1478-1480-1485-1487-1488-1560-1565-1567-15681570-1575-1577-1578-1580-1585-1587-1588-1660-1665-1667-1668-1670-1675-16771678-1680-1685-1687-1688-320-322-328-330-332-338-340-342-345-348-350-352358-4320-4328-4330-4338-4340-4350-4430-4435-4437-44379-4438-4439-4440-44454447-44479-4448-4449-4450-4455-4457-44579-4458-4459-4460-4465-4467-44684470-4475-4477-4478-4480-4485-4487-4488-4530-4535-530-535-540-545 Per profili tipo - For profiles type R 40, R 50 COD. 02896 X Materiale - Material Acciaio inox - Stainless steel 0,18510 - 313 Contropiastre regolabili in acciaio inox Serie 030 X Stainless steel adjustable striking plates Per profili tipo - For profiles type All.co 5 Sormonto Viti e camme INOX Stainless steel screws and cams Inserto per elettroserrature Electric locks device Vaschetta guida scrocco e rullo Latch bolt and roller bolt guide Piastra INOX satinata Plate in brush-polished stainless steel Vaschetta copri-spacco Housing cover Regolazione verticale Vertical adjustment Regolazione orizzontale Horizontal adjustment 314 Contropiastre regolabili in acciaio inox Stainless steel adjustable striking plates Per serrature serie - For locks series cod. 11140-11141-11145-11148-11170-11171-11175-11178-1940-1941-1945-19481970-1971-1975-1978-41140-41141-41145-41148-41170-41171-41175-411784940-4941-4945-4948-4970-4971-4975-4978-5930-5931-5935-5938-5940-59415945-5948-5950-5951-5960-5961-5965-5968-5970-5971-5975-5978-5980-5981 Per profili tipo - For profiles type All.co 5 Sormonto COD. 03021 X Materiale - Material Acciaio inox - Stainless steel 0,14810 - Per serrature ad ingranaggi con catenaccio avanzante For locks with gear mechanism movements with advancing dead bolt cod. 1601-1611-1621-1631-1701-1721 Per deviatori serrature multipunto ad ingranaggi For deviators of vertical multi-point locks with gear mechanism movements Per profili tipo - For profiles type All.co 5 Sormonto COD. 03074 X Materiale - Material Acciaio inox - Stainless steel 0,13710 - 315 Contropiastre regolabili in acciaio inox Stainless steel adjustable striking plates Per serrature ad ingranaggi con catenaccio avanzante For locks with gear mechanism movements with advancing dead bolt cod. 1600-1605-1610-1615-1620-1625-1630-1635-1700-1705-1720-1725 Per profili tipo - For profiles type All.co 5 Sormonto COD. 03076 X Materiale - Material Acciaio inox - Stainless steel 0,16510 - Per serrature serie - For locks series cod. 100021-100031-100041-100051-100061-100121-100131-100141-100151100161-1770-1771-1775-1777-1780-1781-1785-327-334-335-337-339-351-354355-357-359-370-371-375-377-378-380-381-382-385-388-390-391-395-399-43354339-4355-4531-531-541-770-771-775-777-778-780-781-782-785-788-790-791795-799-870-871-875-877-878-880-881-882-885-888-890-891-895-899-990-991995-999 Per profili tipo - For profiles type All.co 5 Sormonto 316 COD. 03081 X Materiale - Material Acciaio inox - Stainless steel 0,12810 - Contropiastre regolabili in acciaio inox Stainless steel adjustable striking plates Per serrature serie - For locks series cod. 1161-1171-1181-1261-1271-1281-1431-1441-1451-1461-1471-1481-1561-15711581-1661-1671-1681-4431-4441-4451-4461-4471-4481 Per deviatori serie - For deviators series cod. 0661-0662 Per profili tipo - For profiles type All.co 5 Sormonto COD. 03094 X Materiale - Material Acciaio inox - Stainless steel 0,13210 - Per serrature serie - For locks series cod. 100020-100025-100030-100035-100040-100045-100050-100055-100060-100065100120-100125-100130-100135-100140-100145-100150-100155-100160-1001651160-1165-1167-1168-1170-1175-1177-1178-1180-1185-1187-1188-1260-1265-12671268-1270-1275-1277-1278-1280-1285-1287-1288-1430-1435-1437-14379-14381439-1440-1445-1447-14479-1448-1449-1450-1455-1457-14579-1458-1459-14601465-1467-1468-1470-1475-1477-1478-1480-1485-1487-1488-1560-1565-1567-15681570-1575-1577-1578-1580-1585-1587-1588-1660-1665-1667-1668-1670-1675-16771678-1680-1685-1687-1688-320-322-328-330-332-338-340-342-345-348-350-352358-4320-4328-4330-4338-4340-4350-4430-4435-4437-44379-4438-4439-4440-44454447-44479-4448-4449-4450-4455-4457-44579-4458-4459-4460-4465-4467-44684470-4475-4477-4478-4480-4485-4487-4488-4530-4535-530-535-540-545 Per profili tipo - For profiles type All.co 5 Sormonto COD. 03096 X Materiale - Material Acciaio inox - Stainless steel 0,16010 - 317 MANIGLIONI ANTIPANICO PANIC EXIT DEVICES -Certificazioni - certifications Pag. 322 - maniglioni antipanico Pag. 323 - COMANDI ESTERNI -ACCESSORI - panic exit devices Pag. 326 - OUTSIDE ACCESSORIES - ACCESSORIES -schemi di applicazione delle porte - schemes of door application Pag. 329 Pag. 330 319 320 Maniglioni antipanico serie 6210 Panic exit devices series 6210 Certificazioni - Certifications NORMA UNI EN 1125:2008 3 CATEGORIA D’USO 3 = uso molto frequente da parte di persone che possono non prestare attenzione, cioè possibilità di incidente o uso improprio CATEGORY OF USE 3 = high frequency of use where there is little incentive to exercise care; i.e. where there is a chance of an accident occurring and of misuse 7 DURABILITà 6 = 100.000 cicli 7 = 200.000 cicli Classificazione ICIM = 500.000 cicli DURABILITY 6 = 100.000 test cycles 7 = 200.000 test cycles ICIM Classification = 500.000 test cycles MASSA DELLA PORTA 5 = fino a 100 Kg 6 = fino a 200 Kg 7 = oltre 200 Kg Classificazione ICIM = 300 Kg DOOR MASS 5 = up to 100 Kg 6 = up to 200 Kg 7 = over 200 Kg ICIM Classification = 300 Kg IDONEITà ALL’USO SU PORTE TAGLIAFUOCO/ANTIFUMO 0 = non adatto a porte tagliafuoco/antifumo A = adatto a porte antifumo B = adatto a porte tagliafuoco/antifumo SUITABILITY FOR USE ON FIRE/SMOKE DOORS 0 = not approved for use on fire/smoke doors A = suitable for use on smoke doors B = suitable for use on smoke/fire doors 1 SICUREZZA PER LE PERSONE 1 = grado massimo per garantire la sicurezza delle persone SAFETY 1 = top grade: all panic exit devices have a critical safety function 4 RESISTENZA ALLA CORROSIONE 3 = alta resistenza (96 h) 4 = altissima resistenza (240 h) CORROSION RESISTANCE 3 = high resistance (96 h) 4 = very high resistance (240 h) 2 SICUREZZA PER I BENI 2 = la sicurezza dei beni risulta secondaria rispetto a quella delle persone SECURITY 2 = security requirements are secondary to those of safety 2 SPORGENZA DELLA BARRA 1 = fino a 150 mm (maggiorata) 2 = fino a 100 mm (standard) PROJECTION OF HORIZONTAL BAR 1 = up to 150 mm (large) 2 = up to 100 mm (standard) A TIPO DI AZIONAMENTO A = barra a spinta B = barra a contatto TYPE OF HORIZONTAL BAR OPERATION A = push bar B = touch bar CAMPO DI APPLICAZIONE DELLA PORTA A = porta ad un’anta o porta a due ante: anta attiva o passiva B = solo porta ad un’anta C = porta a due ante, solo anta passiva FIELD OF DOOR APPLICATION A = single door, double door: active or inactive B = single door only C = double door, inactive leaf only STANDARD UNI EN 1125:2008 7 A A 322 Maniglioni antipanico serie 6210 Panic exit devices series 6210 Triplice (modulare) - Three locking points (modular) CARATTERISTICHE COSTRUTTIVE: Scatole in acciaio zincato Coperchi in alluminio verniciato - Leve in lega speciale verniciata - Scrocco in lega speciale nichelata - Molle in acciaio inox. FUNZIONAMENTO: Scrocco comandato dalla barra orizzontale o dai comandi esterni. PARTI IN DOTAZIONE: Contropiastra laterale, tappi in nylon, viti di fissaggio, istruzioni di montaggio, dime di foratura. CONSTRUCTIVE FEATURES: Zinc-plated steel cases - Painted aluminium covers - Painted special alloy levers - Nickel-plated special alloy latch bolt - Stainless steel springs. WORKING: Horizontal bar or outside accessories driven latch bolt. PROVIDED WITH: Side striker, nylon plugs, fixing screws, assembling instructions, templates for drilling. COD. Mano - Hand Finitura - Finishing 6213 Reversibile - Reversible Nero - Black RAL 9005 2,18 1 10 6213/B Reversibile - Reversible Bianco - White RAL 9010 2,18 1 10 6213/B16 Reversibile - Reversible Bianco - White RAL 9016 2,18 1 10 6213/G Reversibile - Reversible Grigio - Grey RAL 7040 2,18 1 10 6213/X Reversibile - Reversible Inox satinato - Satinized stainless steel 2,18 1 10 6213 DX Destro - Right Nero - Black RAL 9005 1,95 1 10 6213/B DX Destro - Right Bianco - White RAL 9010 1,95 1 10 6213/B16 DX Destro - Right Bianco - White RAL 9016 1,95 1 10 6213/G DX Destro - Right Grigio - Grey RAL 7040 1,95 1 10 6213/X DX Destro - Right Inox satinato - Satinized stainless steel 1,95 1 10 6213 SX Sinistro - Left Nero - Black RAL 9005 1,95 1 10 6213/B SX Sinistro - Left Bianco - White RAL 9010 1,95 1 10 6213/B16 SX Sinistro - Left Bianco - White RAL 9016 1,95 1 10 6213/G SX Sinistro - Left Grigio - Grey RAL 7040 1,95 1 10 6213/X SX Sinistro - Left Inox satinato - Satinized stainless steel 1,95 1 10 323 Maniglioni antipanico serie 6210 Panic exit devices series 6210 Barre orizzontali - Horizontal bars MATERIALE: Acciaio verniciato. PARTI IN DOTAZIONE: Tappi in nylon. MATERIAL: Painted steel. PROVIDED WITH: Nylon plugs. MATERIALE: Acciaio inox. PARTI IN DOTAZIONE: Tappi in nylon. MATERIAL: Stainless steel. PROVIDED WITH: Nylon plugs. 324 COD. L Finitura - Finishing 6005 AB 1130 Bianco - White RAL 9010 1,06 10 - 6005 AB16 1130 Bianco - White RAL 9016 1,06 10 - 6005 AG 1130 Grigio - Grey RAL 7040 1,06 10 - 6005 AN 1130 Nero - Black RAL 9005 1,06 10 - 6005 AR 1130 Rosso - Red RAL 3020 1,06 10 - 6005 AV 1130 Verde - Green RAL 6024 1,06 10 - 6006 AB 1480 Bianco - White RAL 9010 1,32 10 - 6006 AB16 1480 Bianco - White RAL 9016 1,32 10 - 6006 AG 1480 Grigio - Grey RAL 7040 1,32 10 - 6006 AN 1480 Nero - Black RAL 9005 1,32 10 - 6006 AR 1480 Rosso - Red RAL 3020 1,32 10 - 6006 AV 1480 Verde - Green RAL 6024 1,32 10 - COD. L 6005 X 1130 Satinato - Satinized 1,20 10 - 6006 X 1480 Satinato - Satinized 1,50 10 - Finitura - Finishing Maniglioni antipanico serie 6210 Panic exit devices series 6210 Kit deviatori alto/basso - Top and bottom latch bolts kit CARATTERISTICHE COSTRUTTIVE: Scatole in acciaio zincato - Coperchi in alluminio verniciato - Scrocchi in lega speciale nichelata - Molle in acciaio inox - Aste in acciaio zincato Copriasta in alluminio verniciato. APPLICAZIONE: Maniglioni antipanico triplici. PARTI IN DOTAZIONE: Contropiastra laterale, contropiastra a pavimento, viti e accessori di fissaggio. CONSTRUCTIVE FEATURES: Zinc-plated steel cases - Painted aluminium covers - Nickel-plated special alloy latch bolts - Stainless steel springs - Zinc-plated steel rods - Painted aluminium cover rod. APPLICATION: Three locking points panic exit devices. PROVIDED WITH: Side striker, floor striker, fixing screws and fixing accessories. Kit deviatori laterali - COD. Finitura - Finishing 6040 Nero - Black RAL 9005 2,22 1 - 6040/B Bianco - White RAL 9010 2,22 1 - 6040/B16 Bianco - White RAL 9016 2,22 1 - 6040/G Grigio - Grey RAL 7040 2,22 1 - 6040/X Inox satinato - Satinized stainless steel 2,22 1 - COD. Finitura - Finishing 6041 Nero - Black RAL 9005 2,21 1 - 6041/B Bianco - White RAL 9010 2,21 1 - 6041/B16 Bianco - White RAL 9016 2,21 1 - 6041/G Grigio - Grey RAL 7040 2,21 1 - 6041/X Inox satinato - Satinized stainless steel 2,21 1 - Side latch bolts kit CARATTERISTICHE COSTRUTTIVE: Scatole in acciaio zincato - Coperchi in alluminio verniciato - Scrocchi in lega speciale nichelata - Molle in acciaio inox - Aste in acciaio zincato Copriasta in alluminio verniciato. APPLICAZIONE: Maniglioni antipanico triplici. PARTI IN DOTAZIONE: 2 contropiastre laterali, viti e accessori di fissaggio. CONSTRUCTIVE FEATURES: Zinc-plated steel cases - Painted aluminium covers - Nickel-plated special alloy latch bolts - Stainless steel springs - Zinc-plated steel rods - Painted aluminium cover rod. APPLICATION: Three locking points panic exit devices. PROVIDED WITH: 2 side strikers, fixing screws and fixing accessories. 325 Comandi esterni Outside accessories Placca esterna con maniglia e cilindro - CARATTERISTICHE COSTRUTTIVE: Scatola e maniglia in lega speciale verniciata - Coperchio in acciaio zincato e plastificato - Cilindro in ottone nichelato. FUNZIONAMENTO: Apertura porta comandata dalla maniglia Blocco maniglia comandato dalla chiave (maniglia fissa). PARTI IN DOTAZIONE: 3 chiavi, viti di fissaggio, istruzioni di montaggio, dima di foratura. CONSTRUCTIVE FEATURES: Painted special alloy case and handle - Zinc and plastic plated steel cover - Nickel-plated brass cylinder. WORKING: Door opened by the handle - Handle interlock is controlled by the key (blocked handle). PROVIDED WITH: 3 keys, fixing screws, assembling instructions, template for drilling. Outside plate with handle and cylinder COD. 6011 121/04 H 105/05 Nero - Black RAL 9005 1,00 1 - 6011/B 121/04 H 105/05 Bianco - White RAL 9010 1,00 1 - 6011/B16 121/04 H 105/05 Bianco - White RAL 9016 1,00 1 - 6011/G 121/04 H 105/05 Grigio - Grey RAL 7040 1,00 1 - 6011/X 121/04 H 105/05 Inox satinato - Satinized stainless steel 1,00 1 - Placca esterna con maniglia libera e cilindro - CARATTERISTICHE COSTRUTTIVE: Scatola e maniglia in lega speciale verniciata - Coperchio in acciaio zincato e plastificato - Cilindro in ottone nichelato. FUNZIONAMENTO: Apertura porta comandata dalla maniglia Blocco maniglia comandato dalla chiave (maniglia frizionata). PARTI IN DOTAZIONE: 3 chiavi, viti di fissaggio, istruzioni di montaggio, dima di foratura. CONSTRUCTIVE FEATURES: Painted special alloy case and handle - Zinc and plastic plated steel cover - Nickel-plated brass cylinder. WORKING: Door opened by the handle - Handle interlock is controlled by the key (free handle). PROVIDED WITH: 3 keys, fixing screws, assembling instructions, template for drilling. 326 Finitura - Finishing Outside plate with free handle and cylinder COD. Finitura - Finishing 6012 121/04 H 105/05 Nero - Black RAL 9005 0,99 1 - 6012/B 121/04 H 105/05 Bianco - White RAL 9010 0,99 1 - 6012/B16 121/04 H 105/05 Bianco - White RAL 9016 0,99 1 - 6012/G 121/04 H 105/05 Grigio - Grey RAL 7040 0,99 1 - 6012/X 121/04 H 105/05 Inox satinato - Satinized stainless steel 0,99 1 - Comandi esterni Outside accessories Placca con maniglia e cilindro a chiave piatta - CARATTERISTICHE COSTRUTTIVE: Scatola e maniglia in lega speciale verniciata - Coperchio in acciaio zincato e plastificato - Cilindro in ottone nichelato. FUNZIONAMENTO: Apertura porta comandata dalla maniglia Blocco maniglia comandato dalla chiave (maniglia fissa). PARTI IN DOTAZIONE: 3 chiavi, viti di fissaggio, istruzioni di montaggio, dima di foratura. CONSTRUCTIVE FEATURES: Painted special alloy case and handle - Zinc and plastic plated steel cover - Nickel-plated brass cylinder. WORKING: Door opened by the handle - Handle interlock is controlled by the key (blocked handle). PROVIDED WITH: 3 keys, fixing screws, assembling instructions, template for drilling. Outside plate with handle and flat key cylinder COD. Finitura - Finishing 6013 2121/04 H 2020/06 Nero - Black RAL 9005 1,02 1 - 6013/B 2121/04 H 2020/06 Bianco - White RAL 9010 1,02 1 - 6013/B16 2121/04 H 2020/06 Bianco - White RAL 9016 1,02 1 - 6013/G 2121/04 H 2020/06 Grigio - Grey RAL 7040 1,02 1 - 6013/X 2121/04 H 2020/06 Inox satinato - Satinized stainless steel 1,02 1 - Placca esterna con maniglia libera e cilindro a chiave piatta Outside plate with free handle and flat key cylinder CARATTERISTICHE COSTRUTTIVE: Scatola e maniglia in lega speciale verniciata - Coperchio in acciaio zincato e plastificato - Cilindro in ottone nichelato. FUNZIONAMENTO: Apertura porta comandata dalla maniglia Blocco maniglia comandato dalla chiave (maniglia frizionata). PARTI IN DOTAZIONE: 3 chiavi, viti di fissaggio, istruzioni di montaggio, dima di foratura. CONSTRUCTIVE FEATURES: Painted special alloy case and handle - Zinc and plastic plated steel cover - Nickel-plated brass cylinder. WORKING: Door opened by the handle - Handle interlock is controlled by the key (free handle). PROVIDED WITH: 3 keys, fixing screws, assembling instructions, template for drilling. COD. Finitura - Finishing 6014 2121/04 H 2020/06 Nero - Black RAL 9005 1,01 1 - 6014/B 2121/04 H 2020/06 Bianco - White RAL 9010 1,01 1 - 6014/B16 2121/04 H 2020/06 Bianco - White RAL 9016 1,01 1 - 6014/G 2121/04 H 2020/06 Grigio - Grey RAL 7040 1,01 1 - 6014/X 2121/04 H 2020/06 Inox satinato - Satinized stainless steel 1,01 1 - 327 Comandi esterni Outside accessories Mezzo cilindro nichelato - Nickel-plated half cylinder CARATTERISTICHE COSTRUTTIVE: Corpo in ottone nichel satinato - Cilindretto in ottone nichelato - Perni e controperni in ottone - Molle in bronzo fosforoso - Camma DIN disassata di 30° in acciaio autolubrificante - Chiavi in ottone nichelato. FUNZIONAMENTO: Rotazione della chiave di 360°. PARTI IN DOTAZIONE: 3 chiavi. VARIANTI A RICHIESTA: Impianti speciali KA-MK-GMK-CL. CONSTRUCTIVE FEATURES: Satin nickel-plated brass body - Nickel-plated brass plug Brass pins - Phosphor bronze springs - Steel off center 30° DIN cam - Nichel-plated brass keys. WORKING: Turn the key 360°. PROVIDED WITH: 3 keys. ON REQUEST: Special keying systems KA-MK-GMK-CL. COD. 121/04 H* LAB 40 30 10 5 105/05 Spessore porta Door thickness - 0,14 1 10 121/12 H 978710 5 105/05 60÷75 0,291 5 121/13 H 10797 10 5 105/05 76÷85 0,31 1 5 121/24 H 706010 5 105/05 40÷49 0,221 10 121/26 H 807010 5 105/05 50÷59 0,241 10 *Per placche esterne COD. 6011-6012 For outside plates COD. 6011-6012 Mezzo cilindro nichelato (6 perni) - Nickel-plated half cylinder (6 pins) CARATTERISTICHE COSTRUTTIVE: Corpo in ottone nichel satinato - Cilindretto in ottone nichelato - Perni in acciaio inox - Controperni in ottone - Molle in bronzo fosforoso Camma DIN disassata di 30° in acciaio autolubrificante - Chiavi piatte reversibili in ottone nichelato con numero di codice. FUNZIONAMENTO: Rotazione della chiave di 360°. PARTI IN DOTAZIONE: 3 chiavi. VARIANTI A RICHIESTA: Impianti speciali KA-MK-GMK-CL. CONSTRUCTIVE FEATURES: Satin nickel-plated brass body - Nickel-plated brass plug Stainless steel pins - Brass drivers - Phosphor bronze springs - Steel off center 30° DIN cam - Nichel-plated brass reversible flat keys with code number. WORKING: Turn the key 360°. PROVIDED WITH: 3 keys. ON REQUEST: Special keying systems KA-MK-GMK-CL. COD. 2121/04 H* LAB 40 30 10 6 - 0,15 1 10 2121/24 H 706010 6 2020/06 40÷49 0,261 10 2121/26 H 807010 6 2020/06 50÷59 0,291 10 2121/27 H 908010 6 2020/06 60÷69 0,331 5 *Per placche esterne COD. 6013-6014 For outside plates COD. 6013-6014 328 2020/06 Spessore porta Door thickness Accessori per maniglioni antipanico Accessories for panic exit devices Asta lunga per deviatori Contropiastra laterale Long rod for locking kit Side striker COD. COD. Materiale - Material AST006 Acciaio zincato - Zinc-plated steel ANY117 0,23110 - Copriasta lungo AST016 AST022 AST025 Lega speciale nichelata - Nickel-plated special alloy ANY118 10 - 0,08510 - Floor striker Materiale - Material Alluminio nero RAL 9005 - Black aluminium RAL 90050,22410 Alluminio bianco RAL 9010 - White aluminium RAL 9010 - 0,22410 - Alluminio grigio RAL 7040 - Grey aluminium RAL 70400,224 10 Alluminio satinato - Satinized aluminium AST052 AST055 L ega speciale verniciata nera - Black painted special alloy0,085 Contropiastra a pavimento Long cover rod COD. Materiale - Material - 0,22410 - Alluminio bianco RAL 9016 - White aluminium RAL 90160,224 10 - COD. ANY119 Materiale - Material Lega speciale verniciata nera - Black painted special alloy0,055 Lega speciale nichelata - Nickel-plated special alloy ANY120 10 - 0,05510 - Kit di prolunga per deviatori Prolongation kit for deviators Per porte fino a 3000 mm di altezza For doors high up to 3000 mm COD. 6032 Finitura - Finishing Nero RAL 9005 - Black RAL 9005 0,6505 - 0,6505 - 6032/B Bianco RAL 9010 - White RAL 9010 6032/B16 Bianco RAL 9016 - White RAL 9016 0,6505 - 6032/G Grigio RAL 7040 - Grey RAL 7040 0,6505 - Inox satinato - Satinized stainless steel 0,6505 - 6032/X 329 Schemi di applicazione per porte ad un’anta Schemes for single doors Un punto di chiusura - One locking point 6213 6213 DX 6213 6213 SX Due punti di chiusura - Two locking points 6213 + 6040 6213 DX + 6040 6213 + 6040 6213 SX + 6040 6213 + 6041 6213 DX + 6041 6213 + 6041 6213 SX + 6041 6213 + 6041 6213 DX + 6041 6213 + 6041 6213 SX + 6041 Tre punti di chiusura - Three locking points 6213 + 6040 6213 DX + 6040 330 6213 + 6040 6213 SX + 6040 Schema di applicazione per porte a due ante Schemes for double doors ANTA PASSIVA INACTIVE LEAF Tre punti di chiusura - Three locking points 6213 + 6040 6213 DX + 6040 6213 6213 SX ANTA ATTIVA ACTIVE LEAF Quattro punti di chiusura - Four locking points 6213 + 6040 6213 DX + 6040 6213 + 6041 6213 SX + 6041 6213 + 6040 6213 DX + 6040 6213 + 6041 6213 SX + 6041 Cinque punti di chiusura - Five locking points 6213 + 6040 6213 DX + 6040 6213 + 6041 6213 SX + 6041 331 Serrature per porte in vetro Locks for glass doors Scrocco con mandata - Latch bolt with throw 75 24 66 10 66 3 40 20 14 CARATTERISTICHE COSTRUTTIVE: Scatola e coperchio in acciaio zincato e plastificato - Frontale in acciaio nichelato e cromato - Scrocco in ottone cromato FUNZIONAMENTO: Mandata comandata dalla chiave - Scrocco comandato dalla chiave MANO: Reversibile PARTI IN DOTAZIONE: Vite cilindro 64 F COD. F mandate 1240 18 1 0,18 - 50 1240/F16 16 1 0,18 - 50 throws CONSTRUCTIVE FEATURES: Zinc and plastic plated steel case and cover - Nickel and chrome plated steel faceplate - Chrome plated brass latch bolt WORKING: Key-driven throw - Key-driven latch bolt HAND: Reversible PROVIDED WITH: Cylinder screw Catenaccio 2 mandate - Dead bolt 2 throws 75 66 66 10 24 3 40 CARATTERISTICHE COSTRUTTIVE: Scatola e coperchio in acciaio zincato e plastificato - Frontale in acciaio nichelato e cromato - Catenaccio in ottone cromato FUNZIONAMENTO: Catenaccio comandato dalla chiave MANO: Unica PARTI IN DOTAZIONE: Vite cilindro 64 19 14 F COD. F mandate 1241 18 2 0,18 - 50 1241/F16 16 2 0,18 - 50 throws CONSTRUCTIVE FEATURES: Zinc and plastic plated steel case and cover - Nickel and chrome plated steel faceplate - Chrome plated brass dead bolt WORKING: Key-driven dead bolt HAND: No hand PROVIDED WITH: Cylinder screw 1 Serrature per porte in vetro Locks for glass doors Scrocco - Latch bolt 75 24 66 10 66 3 40 14 CARATTERISTICHE COSTRUTTIVE: Scatola e coperchio in acciaio zincato e plastificato - Frontale in acciaio nichelato e cromato - Scrocco in ottone cromato - Ingegno maniglia in acciaio brunito foro mm.8 FUNZIONAMENTO: Scrocco comandato dalla maniglia MANO: Reversibile PARTI IN DOTAZIONE: / 64 11 F COD. F mandate 1242 18 1 0,20 - 50 1242/F16 16 1 0,20 - 50 throws CONSTRUCTIVE FEATURES: Zinc and plastic plated steel case and cover - Nickel and chrome plated steel faceplate - Chrome plated brass latch bolt - Burnished steel square spindle device mm.8 WORKING: Handle-driven latch bolt HAND: Reversible PROVIDED WITH: / Incontro per art. 1240-1241-1242 - Striking plate for items 1240-1241-1242 66 66 40 64 14 CARATTERISTICHE COSTRUTTIVE: Scatola e coperchio in acciaio zincato e plastificato - Frontale in acciaio nichelato e cromato FUNZIONAMENTO: / MANO: / PARTI IN DOTAZIONE: / CONSTRUCTIVE FEATURES: Zinc and plastic plated steel case and cover - Nickel and chrome plated steel faceplate WORKING: / HAND: PROVIDED WITH: / 2 F COD. F mandate 1243 18 - 0,11 - 50 1243/F16 16 - 0,11 - 50 throws 75 11 3 Serrature per porte in vetro Locks for glass doors Pistone 2 mandate - Piston 2 throws 75 66 66 10 3 40 CARATTERISTICHE COSTRUTTIVE: Scatola e coperchio in acciaio zincato e plastificato - Frontale in acciaio nichelato e cromato - Pistone in lega speciale cromata con spina antisega FUNZIONAMENTO: Pistone comandato dalla chiave MANO: Unica PARTI IN DOTAZIONE: Vite cilindro 64 19 14 F COD. F mandate 1244 18 2 0,16 - 50 1244/F16 16 2 0,16 - 50 throws CONSTRUCTIVE FEATURES: Zinc and plastic plated steel case and cover - Nickel and chrome plated steel faceplate - Chrome plated special alloy piston with saw resistant protection WORKING: Key-driven piston HAND: No hand PROVIDED WITH: Cylinder screw Rullo con mandata - Roller bolt with throw 75 24 66 10 66 3 40 64 14 CARATTERISTICHE COSTRUTTIVE: Scatola e coperchio in acciaio zincato e plastificato - Frontale in acciaio nichelato e cromato - Rullo in ottone cromato FUNZIONAMENTO: Mandata comandata dalla chiave - Rullo comandato a pressione o dalla chiave MANO: Unica PARTI IN DOTAZIONE: Vite cilindro F COD. F mandate 1245 18 1 0,17 - 50 1245/F16 16 1 0,17 - 50 throws CONSTRUCTIVE FEATURES: Zinc and plastic plated steel case and cover - Nickel and chrome plated steel faceplate - Chrome plated brass roller bolt WORKING: Key-driven throw - Pressure or key-driven roller bolt HAND: No hand PROVIDED WITH: Cylinder screw 3 Serrature per porte in vetro Locks for glass doors Gancio - Hook bolt 75 66 10 66 3 40 6 14 CARATTERISTICHE COSTRUTTIVE: Scatola e coperchio in acciaio zincato e plastificato - Frontale in acciaio nichelato e cromato - Gancio in acciaio cromato FUNZIONAMENTO: Gancio comandato dalla chiave MANO: Unica PARTI IN DOTAZIONE: Vite cilindro 64 F COD. F mandate 1246 18 1 0,17 - 50 1246/F16 16 1 0,17 - 50 throws CONSTRUCTIVE FEATURES: Zinc and plastic plated steel case and cover - Nickel and chrome plated steel faceplate - Chrome plated steel hook bolt WORKING: key-driven hook bolt HAND: No hand PROVIDED WITH: Cylinder screw Incontro per art.1244 - Striking plate for item 1244 18 CARATTERISTICHE COSTRUTTIVE: Scatola e coperchio in acciaio zincato e plastificato - Frontale in acciaio nichelato e cromato FUNZIONAMENTO: / MANO: / PARTI IN DOTAZIONE: / CONSTRUCTIVE FEATURES: Zinc and plastic plated steel case and cover - Nickel and chrome plated steel faceplate WORKING: / HAND: / PROVIDED WITH: / 4 64 F COD. F mandate 1247 18 - 0,12 - 50 1247/F16 16 - 0,12 - 50 throws 75 66 66 3 Serrature per porte in vetro Locks for glass doors Pistone con mandata - Piston with throw 111 85 7 97 10 7 3 19 14 CARATTERISTICHE COSTRUTTIVE: Scatola e coperchio in acciaio zincato e plastificato - Frontale in acciaio nichelato e cromato - Pistone in lega speciale cromata con spina antisega FUNZIONAMENTO: Pistone comandato dalla chiave MANO: Unica PARTI IN DOTAZIONE: Vite cilindro 17 34 F COD. F mandate 1144 18 1 0,14 - 50 1144/F16 16 1 0,14 - 50 throws CONSTRUCTIVE FEATURES: Zinc and plastic plated steel case and cover - Nickel and chrome plated faceplate - Chrome plated special alloy piston with saw resistant protection WORKING: Key-driven piston HAND: No hand PROVIDED WITH: Cylinder screw 5 Serrature per porte in vetro Locks for glass doors Scrocco con mandata - Latch bolt with throw 132 10 68 30 54 62 G G 65 49 15 CARATTERISTICHE COSTRUTTIVE: Scatola e coperchio in acciaio zincato - Scrocco in nylon - Ingegno maniglia in ottone foro mm.8 FUNZIONAMENTO: Mandata comandata dalla chiave - Scrocco comandato dalla chiave o dalla maniglia MANO: Reversibile PARTI IN DOTAZIONE: Vite cilindro 20 COD. 1250 N M4 146 G mandate 6.5 1 15 throws 0,43 - 50 CONSTRUCTIVE FEATURES: Zinc plated steel case and cover Nylon latch bolt - Brass square spindle device mm.8 WORKING: Key-driven throw - Handle or key-driven latch bolt HAND: Reversible PROVIDED WITH: Cylinder screw Scrocco con mandata - Latch bolt with throw 132 10 68 30 54 62 G G 65 49 15 CARATTERISTICHE COSTRUTTIVE: Scatola e coperchio in acciaio zincato - Scrocco in nylon - Ingegno maniglia in ottone foro mm.8 FUNZIONAMENTO: Mandata comandata dalla chiave - Scrocco comandato dalla chiave o dalla maniglia MANO: Reversibile PARTI IN DOTAZIONE: Una chiave CONSTRUCTIVE FEATURES: Zinc plated steel case and cover Nylon latch bolt - Brass square spindle device mm.8 WORKING: Key-driven throw - Handle or key-driven latch bolt HAND: Reversible PROVIDED WITH: One key 6 COD. 1251 N 20 M4 146 G mandate 6.5 1 15 throws 0,46 - 50 Serrature per porte in vetro Locks for glass doors Scrocco - Latch bolt 132 10 68 30 54 62 G G 49 15 CARATTERISTICHE COSTRUTTIVE: Scatola e coperchio in acciaio zincato - Scrocco in nylon - Ingegno maniglia in acciaio brunito foro mm.8 FUNZIONAMENTO: Scrocco comandato dalla maniglia MANO: Reversibile PARTI IN DOTAZIONE: / M4 146 11 COD. 1252 N G mandate 6.5 - 15 throws 0,41 - 50 CONSTRUCTIVE FEATURES: Zinc plated steel case and cover Nylon latch bolt - Burnished steel square spindle device mm.8 WORKING: Handle-driven latch bolt HAND: Reversible PROVIDED WITH: / Incontro per art. 1250-1251-1252 - Striking plate for items 1250-1251-1252 132 10 68 54 62 G G M4 15 CARATTERISTICHE COSTRUTTIVE: Scatola e coperchio in acciaio zincato FUNZIONAMENTO: / MANO: / PARTI IN DOTAZIONE: / 146 COD. G mandate 1253 6.5 - 15 throws 0,32 - 50 CONSTRUCTIVE FEATURES: Zinc plated steel case and cover WORKING: / HAND: / PROVIDED WITH: / 7 Serrature per porte in vetro Locks for glass doors Scrocco con mandata - Latch bolt with throw 118 10 G 40 14 CARATTERISTICHE COSTRUTTIVE: Scatola e coperchio in acciaio zincato - Scrocco in ottone cromato - Ingegno maniglia in ottone foro mm.8 FUNZIONAMENTO: Mandata comandata dalla chiave - Scrocco comandato dalla chiave o dalla maniglia MANO: Reversibile PARTI IN DOTAZIONE: Vite cilindro CONSTRUCTIVE FEATURES: Zinc plated steel case and cover Chrome plated brass latch bolt - Brass square spindle device mm.8 WORKING: Key-driven throw - Handle or key-driven latch bolt HAND: Reversible PROVIDED WITH: Cylinder screw 8 64 24 51 61 G 60 20 M4 132 COD. G mandate 1230 10 1 14 throws 0,39 - 50