Registered Office: Via del Saliccio, 11A. 21040 Sumirago (VA) Italy

Registered Office:
Via del Saliccio, 11A.
21040 Sumirago (VA) Italy
Phone
+39 (0)331 271 011
Fax
+39 (0)331 908 669
Reg. Imprese di Varese/C.F./P. IVA 02391260029
Società soggetta a direzione e controllo da VIAR Meccanica s.r.l.
Capitale sociale i.v. 50.000 €
Registered Office:
Via del Saliccio, 11A.
21040 Sumirago (VA) Italy
Phone
+39 (0)331 271 011
Fax
+39 (0)331 908 669
Reg. Imprese di Varese/C.F./P. IVA 02391260029
Società soggetta a direzione e controllo da VIAR Meccanica s.r.l.
Capitale sociale i.v. 50.000 €
2
Registered Office:
Via del Saliccio, 11A.
21040 Sumirago (VA) Italy
Phone
+39 (0)331 271 011
Fax
+39 (0)331 908 669
Reg. Imprese di Varese/C.F./P. IVA 02391260029
Società soggetta a direzione e controllo da VIAR Meccanica s.r.l.
Capitale sociale i.v. 50.000 €
Contents Introduction List of Special Items p.4 p.5 Integral Forged Tee ‐Barred ‐Lateral Integral Wye Piece Anchor Flange Swivel Flange p.6 p.6 p.8 p.9 p.10 p.11 Misalignment Flange Compact Flange ‐ NORSOK Compact Flange ‐ VIAR Compact Flange ‐ Sealing System and Advantages Clamp Connectors p.12 p.13 p.13 P.14 p.15 p.16 ‐VIAR‐Lock ‐ Seal Ring Mechanism ‐ Advantages ‐ Interchangeability of Pipe Clamp Connections ‐Quick VIAR‐Lock Closure Flanged Tees, Studded Tees, Integral Spool Pieces p.16 p.18 p.19 p.19 p.20 p.22 Special Applications Reference List How To Reach Us p.23 p.25 p.27 3
Registered Office:
Via del Saliccio, 11A.
21040 Sumirago (VA) Italy
Phone
+39 (0)331 271 011
Fax
+39 (0)331 908 669
Reg. Imprese di Varese/C.F./P. IVA 02391260029
Società soggetta a direzione e controllo da VIAR Meccanica s.r.l.
Capitale sociale i.v. 50.000 €
INTRODUCTION VIAR Engineering provides comprehensive and professional engineering services to oil, gas and pressure vessel industries as well as power plants. VIAR Engineering was founded as an extension of VIAR®, a prestigious and dynamic company with over 25 years experience in providing outlets, flanges, fittings and tailor made pieces to oil and gas industries. Our company is specialised in the conception, design and development of new products in response to clients needs in addition to providing general engineering services. Predominantly involved in the special and non‐standard component market, VIAR Engineering is also able to provide calculations and verifications for all other pieces as and when required. Designs are carried out in conformity with all main international codes: ASME VIII div.1 and 2, ASME B31.1, B31.3, B31.4 and B31.8, EN/ISO codes, Stoomwezen, AD 2000‐Merkblatt/TRD 100. Special components are designed employing sophisticated analysis instruments such as Finite Element Analysis according to ASME VIII Div.2 code and specific tests of all special components can be performed in agreement with the customer. VIAR Engineering also develops calculation sheets for design according to international codes. For any further information please contact our offices. 4
Registered Office:
Via del Saliccio, 11A.
21040 Sumirago (VA) Italy
Phone
+39 (0)331 271 011
Fax
+39 (0)331 908 669
Reg. Imprese di Varese/C.F./P. IVA 02391260029
Società soggetta a direzione e controllo da VIAR Meccanica s.r.l.
Capitale sociale i.v. 50.000 €
LIST OF SPECIAL ITEMS VIAR Engineering is specialised in the conception and detailed design of special and unlisted piping components. Here are some examples of products that VIAR Engineering designs: ƒ
Integral Forged Barred Tees ƒ
Integral Lateral Tees ƒ
Integral Wye Pieces ƒ
Anchor/Hanger Flanges ƒ
Swivel Ring Flanges ƒ
Misalignment Flanges ƒ
Compact Flanges ƒ
Special Forged Flanges ƒ
Clamp Connectors – VIAR‐LOCK ƒ
Quick Closures ‐ QUICK VIAR‐LOCK CLOSURE ƒ
API Flanged Tee, Studded Tee and Integral Spool Pieces 5
Registered Office:
O
INTEGRAL FO
ORGED BARREED TEESS Via deel Saliccio, 11A.
210400 Sumirago (VA) Itaaly
Phonee
+39 (0)331 271
2 011
Fax
+39 (0)331 908
9 669
9
Reg. Impresse di Varese/C.F./P.. IVA 02391260029
Società sogggetta a direzione e ccontrollo da VIAR Meccanica
M
s.r.l.
Capitale socciale i.v. 50.000 €
Integral Forrged Barred Tees are employed on
n pipe lines destined forr a PIG (Pipeline Inspecction Gauge)) assembly. Manufacturred from a single forged piece, Integgral Forged B
Barred Tees h
have less strructural weaknesses and
d a superior rresistance to
o corrosion. In effect, as tthe bars havve not been w
welded into place, the co
omponent iss not only more m
structurally sound but the likeelihood of any eventuall corrosion o
of the joint is seriouslyy reduced. The resistance of the material useed is chosen
n in function
n of the corrrosiveness of the fluid of process:: Integral barrred tees aree commonly employed in
n oil extraction where th
his chemical aggression ((sour servicee restriction) is high. 6
Registered Office:
Reg. Imprese di Varese/C.F./P. IVA 02391260029
Società soggetta a direzione e controllo da VIAR Meccanica s.r.l.
Capitale sociale i.v. 50.000 €
Via del Saliccio, 11A.
21040 Sumirago (VA) Italy
Phone
+39 (0)331 271 011
Fax
+39 (0)331 908 669
7
Registered Office:
O
Via deel Saliccio, 11A.
210400 Sumirago (VA) Itaaly
Phonee
+39 (0)331 271
2 011
Fax
+39 (0)331 908
9 669
9
Reg. Impresse di Varese/C.F./P.. IVA 02391260029
Società sogggetta a direzione e ccontrollo da VIAR Meccanica
M
s.r.l.
Capitale socciale i.v. 50.000 €
INTEGRAL LA
ATERALL TEES
8
Registered Office:
Via del Saliccio, 11A.
21040 Sumirago (VA) Italy
Phone
+39 (0)331 271 011
Fax
+39 (0)331 908 669
Reg. Imprese di Varese/C.F./P. IVA 02391260029
Società soggetta a direzione e controllo da VIAR Meccanica s.r.l.
Capitale sociale i.v. 50.000 €
INTEGRAL WYE PIECES Forged Wye Pieces are designed for special applications and can have various angles between branches. A comprehensive engineering process locates critical areas and provides reinforcement accordingly. This requires a great deal of design and calculation, including 3D Finite Element Analysis. Ultimately, a structurally sound and high quality piece can be conceived, designed and produced in conformity with the client’s requirements and all current principal codes. 9
Registered Office:
O
Via deel Saliccio, 11A.
210400 Sumirago (VA) Itaaly
Phonee
+39 (0)331 271
2 011
Fax
+39 (0)331 908
9 669
9
Reg. Impresse di Varese/C.F./P.. IVA 02391260029
Società sogggetta a direzione e ccontrollo da VIAR Meccanica
M
s.r.l.
Capitale socciale i.v. 50.000 €
ANCHO
OR FLA
ANGES Anchor flan
nges are designed to limit the displacement of the pipeline by re‐distrib
buting the axxial thrust to
o the foundattion where the anchor flaange is embeedded. Due to flucctuating tem
mperatures both inside and outside the pipeline, the maaterial is susceptible to
o yielding. An
nchor Flangees, used at in
ntervals oveer long pipelines, are designed to ab
bsorb these movementss and impedee any eventu
ual buckling of the pipe. Once welde
ed to the con
nnecting pipes, the assem
mbly is then
n set in concrrete to enhan
nce the stability of the co
onnection. Each Ancho
or Flange is specifically designed in accordancce with conditions perttinent to the
e maximum
m temperaturre variation b
between insttallation and operating. 10
Registered Office:
O
Via deel Saliccio, 11A.
210400 Sumirago (VA) Itaaly
Phonee
+39 (0)331 271
2 011
Fax
+39 (0)331 908
9 669
9
Reg. Impresse di Varese/C.F./P.. IVA 02391260029
Società sogggetta a direzione e ccontrollo da VIAR Meccanica
M
s.r.l.
Capitale socciale i.v. 50.000 €
SWIVEEL FLAN
NGES Swivel Ring Flanges aree designed principally for use in subssea applicatiions. The Sw
wivel Flange’ss rotary ringg enables a trouble‐free alignment o
of bolt holes with the co
orrespondingg Welding Neeck Flange. Accordingly,, mbly whilst ensuring a stable and sound connection to th
he matchingg their construction facillitates assem
Welding Neeck Flange. p to 48” coveering all presssure classes (#150 up to #2500). Oth
her sizes and
d Swivel Ring Flanges are available up
pressure claasses are avaailable on req
quest. 11
Registered Office:
O
Via deel Saliccio, 11A.
210400 Sumirago (VA) Itaaly
Phonee
+39 (0)331 271
2 011
Fax
+39 (0)331 908
9 669
9
Reg. Impresse di Varese/C.F./P.. IVA 02391260029
Società sogggetta a direzione e ccontrollo da VIAR Meccanica
M
s.r.l.
Capitale socciale i.v. 50.000 €
MISALLIGNMEENT FLLANGESS Misalignmeent Flanges aare principally destined ffor use in su
ubsea applicaations. Theyy have been designed so
o that the main ball flange axis can be misalign
ned by appro
oximately 12
2° ‐14° in fu
ull 3D space around thee longitudinal pipe axis. In
n this manneer misaligned
d pipelines caan be connected. The design is centred arround metal to metal contact. In ord
der to increasse the reliability and performance off the connecttion and of itts sealing surrfaces, it hass to be speciaally treated w
with Carbidee Tungsten. The standard design co
overs the ANSI range fo
or pressure and size. Otther sizes and pressure
e classes aree available on
n request. 12
Registered Office:
O
Via deel Saliccio, 11A.
210400 Sumirago (VA) Itaaly
Phonee
+39 (0)331 271
2 011
Fax
+39 (0)331 908
9 669
9
Reg. Impresse di Varese/C.F./P.. IVA 02391260029
Società sogggetta a direzione e ccontrollo da VIAR Meccanica
M
s.r.l.
Capitale socciale i.v. 50.000 €
COMP
PACT FLLANGESS K COMPA
ACT FLAN
NGES NORSOK
C
Compact Fla
anges are non‐gasketed sstatic pipe co
onnections w
where bolt lo
oads are tran
nsferred thro
ough metal tto contaact between the two coomplementary flange faces. VIAR Enngineering ddevelops Compact Flangge metal c connections nce with Norrsok Standard
ds L‐005. in accordan
13
Registered Office:
O
Via deel Saliccio, 11A.
210400 Sumirago (VA) Itaaly
Phonee
+39 (0)331 271
2 011
Fax
+39 (0)331 908
9 669
9
Reg. Impresse di Varese/C.F./P.. IVA 02391260029
Società sogggetta a direzione e ccontrollo da VIAR Meccanica
M
s.r.l.
Capitale socciale i.v. 50.000 €
VIAR CO
OMPACT FLANGEES VIAR Comp
pact Flanges have been developed by VIAR Engineering srrl. to provid
de a compacct and high‐‐
performancce connectio
on for pipeliines and riseers. The VIA
AR Compact Flange is aa static pipe connection
n where the b
bolt loads aree transferred
d through metal to metal contact bettween the flange faces. 14
Registered Office:
Via del Saliccio, 11A.
21040 Sumirago (VA) Italy
Phone
+39 (0)331 271 011
Fax
+39 (0)331 908 669
Reg. Imprese di Varese/C.F./P. IVA 02391260029
Società soggetta a direzione e controllo da VIAR Meccanica s.r.l.
Capitale sociale i.v. 50.000 €
Sealing system
The distinguishing characteristic of the VIAR Compact Flange is the design of the flange face. A slightly convex bevel (flange face angle) creates a slight toe around the outer extremity of the flange (Fig.1). This means that once the bolts are fully tightened the two faces of the complementary flanges touch unlike conventional flanges (Fig.2). This metal to metal contact of the flange faces gives the structure enhanced stability: yielding of components is limited thanks to the static nature of the flange thus reducing strain on components. The main seal is obtained thanks to the self energising and pressure energised Seal Ring (VR type Seal Ring – see VIAR‐
Lock for more details). Advantages of VIAR Compact Flange in comparison with ASME B31.3/ ASME VIII, Div.2 Flanges The design of the Compact Flange: •
•
Reduces corrosion/erosion problems. Metal to metal contact of the flange faces reduces exposure to oxygen and other corrosive agents thus limiting eventual corrosive damage to the flange faces, the stressed length of the bolts and the Seal Ring. Limits leakages and eliminates need for re‐tightening of bolts. Slight deformation due to eventual yielding of the flange, flange neck or bolt will not result in leakages due to the static nature of the flange and the design of the reusable Seal Ring (Seal Ring is leak tight up to and including maximum load, independent of bolt preload level) •
Gives a technically superior connection. The outer rims of the complementary flanges are brought together during bolting up resulting in a reduction of stress exerted on the flange in comparison with conventional flange designs. Moreover, bolt stress can be controlled by a defined tightening procedure (Lower bolt forces required for the secure installation of the Seal Ring in comparison with those needed in standard connections to achieve a leak‐free joint). Significant addition/ external loads can be accommodated for with complete documentation. Practical ‘collapse’ tests results correspond very well with those foreseen by FEA. Ù VIAR Compact Flanges ensure a optimum, stable and leak‐free connection for pipe work. 15
Registered Office:
O
Via deel Saliccio, 11A.
210400 Sumirago (VA) Itaaly
Phonee
+39 (0)331 271
2 011
Fax
+39 (0)331 908
9 669
9
Reg. Impresse di Varese/C.F./P.. IVA 02391260029
Società sogggetta a direzione e ccontrollo da VIAR Meccanica
M
s.r.l.
Capitale socciale i.v. 50.000 €
CLAMP
P CONN
NECTORS VIAR‐LOC
CK The VIAR‐LO
OCK has beeen designed tto offer optimum reliability with regaards to the p
performance
e of the jointt even under the most seevere operating condition
ns. Due to the intelligent d
design of thee VIAR‐Lock n
not only is itt perfect for use in pipin
ng systems w
where a high
h integrity off the seal is required but it also
o is well‐ad
dapted to corrosive c
orr erosive co
onditions orr environmen
nts that expeerience severre pressure//temperature
e cycles. C
Composi
tion of V
VIAR‐Lock 16
Registered Office:
O
Via deel Saliccio, 11A.
210400 Sumirago (VA) Itaaly
Phonee
+39 (0)331 271
2 011
Fax
+39 (0)331 908
9 669
9
Reg. Impresse di Varese/C.F./P.. IVA 02391260029
Società sogggetta a direzione e ccontrollo da VIAR Meccanica
M
s.r.l.
Capitale socciale i.v. 50.000 €
How the Seal Ringg operatess To understaand how thee VIAR‐LOCK
K Seal Ring operates o
we can examin
ne a cross seection of the
e assembled
d joint (Fig.1)). The leg of o the invertted ‘T’ visible in this cro
oss section fo
orms a rib that stops th
he hub facess touching du
uring the asssembly of th
he lock. The base part off the inverted ‘T’ formed
d by the Seal Ring formss the ‘lip seals’. As its nam
me suggests, this elemen
nt seals the lo
ock to ensuree a leak‐freee joint. In fact, duriing the assembly of the joint, the tw
wo hubs are drawn togetther by the ttightening off the clampss (Fig. 3a &b)). Simultaneo
ously, the Seeal Ring lips eelastically de
eflect againstt the inner su
urfaces of th
he two hubs.. This forms tthe self‐enerrgised seal (FFig. 3c & Fig. 2) When interrnal pressuree is exerted o
on the pipe‐‐line the lips of the Seal Ring are preessed harderr against thee inner surfacces of the hu
ubs. Accordingly, the seaal is reinforcced as the internal pressure rises. Co
onsequently,, the connecttion is all thee more effecttive as it is b
both self and pressure en
nergised. 17
Registered Office:
Advantages of VIAR‐LOCK versus Conventional Flanges ƒ Compact – fewer parts – lighter structure ƒ Quick assembly: 4 bolts to fix clamp and no bolt holes to align ƒ Reduced cost during use due to minimal maintenance ƒ Lower installation cost for 600 class and higher services ƒ
Lower torque requirements ƒ
No need for special tensioning tools ƒ
Self‐energised and pressure energised Seal Ring ƒ
Re‐usable Seal Ring ƒ
High performance of the joint under external forces ƒ
High performance of the joint despite effect of thermal loads: as the bolts do not come into contact with the process fluid, the ‘bolt relaxation effect’ is reduced 18
Via del Saliccio, 11A.
21040 Sumirago (VA) Italy
Phone
+39 (0)331 271 011
Fax
+39 (0)331 908 669
Reg. Imprese di Varese/C.F./P. IVA 02391260029
Società soggetta a direzione e controllo da VIAR Meccanica s.r.l.
Capitale sociale i.v. 50.000 €
Registered Office:
Via del Saliccio, 11A.
21040 Sumirago (VA) Italy
Phone
+39 (0)331 271 011
Fax
+39 (0)331 908 669
Reg. Imprese di Varese/C.F./P. IVA 02391260029
Società soggetta a direzione e controllo da VIAR Meccanica s.r.l.
Capitale sociale i.v. 50.000 €
VIAR‐Locks are completely interchangeable with equivalents by major manufacturers according to the size chart below. Pressure ratings may vary slightly depending on the manufacturer based on material used and design verification methods. INTERCHANGEABILITY OF PIPE CLAMP CONNECTORS HUB SIZE VIAR‐LOCK HUB SIZE VIAR‐LOCK OTHER 1VR4 1VR5 1VR7 1VR11 1 1/2 VR11 1 1/2 VR14 2VR14 2VR16 2VR20 3VR23 3VR25 3VR27 4VR27 4VR31 4VR34 4VR40 6VR46 6VR52 6VR54 6VR56 6VR62 8VR64 8VR67 8VR72 8VR76 8VR82 10H76 10H82 10H84 10H94 10H97 10H102 12M94 12M97 12M102 12M106 12M112 12M120 X14VR112 X14VR120 X14VR122 X14VR130 X14VR134 5P106 5P112 5P120 X16VR137 X16VR140 X16VR144 X16VR152 S134 S137 S140 S144 S152 S160 3Y180 3Y192 3Y200 3Y210 1GR4 1GR5 1GR7 1GR11 1 1/2 GR11 1 1/2 GR14 2GR14 2GR16 2GR20 3GR23 3GR25 3GR27 4GR27 4GR31 4GR34 4GR40 6GR46 6GR52 6GR54 6GR56 6GR62 8GR64 8GR67 8GR72 8GR76 8GR82 10H76 10H82 10H84 10H94 19
OTHER 10H97 10H102 12M94 12M97 12M102 12M106 12M112 12M120 X14GR112 X14GR120 X14GR122 X14GR130 X14GR134 NS P106 NS P112 NS P120 X16GR137 X16GR140 X16GR144 X16GR152 NS S134 NS S137 NS S140 NS S144 NS S152 NS S160 3Y180 3Y192 3Y200 3Y210 Registered Office:
O
Via deel Saliccio, 11A.
210400 Sumirago (VA) Itaaly
Phonee
+39 (0)331 271
2 011
Fax
+39 (0)331 908
9 669
9
Reg. Impresse di Varese/C.F./P.. IVA 02391260029
Società sogggetta a direzione e ccontrollo da VIAR Meccanica
M
s.r.l.
Capitale socciale i.v. 50.000 €
QUICK
K CLOSU
URE ‐ Q
QUICK VIAR LOCK CLLOSUREE The Quick VIAR‐LOCK V
C
CLOSURE hass been deveeloped as an
n extension of o the VIAR‐‐LOCK clamp
p connector.. With one bolt b instead of four, its configuratio
on ensures trouble‐free t
and rapid d
disassembly to facilitatee internal verrification/ insspection of the pipeline. 20
Registered Office:
O
Via deel Saliccio, 11A.
210400 Sumirago (VA) Itaaly
Phonee
+39 (0)331 271
2 011
Fax
+39 (0)331 908
9 669
9
Reg. Impresse di Varese/C.F./P.. IVA 02391260029
Società sogggetta a direzione e ccontrollo da VIAR Meccanica
M
s.r.l.
Capitale socciale i.v. 50.000 €
10000 Psi AP
PI FLAN
NGED TTEE , STUDDED
D TEE &
& INTEG
GRAL SPOOLL PIECEES 21
Registered Office:
O
Via deel Saliccio, 11A.
210400 Sumirago (VA) Itaaly
Phonee
+39 (0)331 271
2 011
Fax
+39 (0)331 908
9 669
9
Reg. Impresse di Varese/C.F./P.. IVA 02391260029
Società sogggetta a direzione e ccontrollo da VIAR Meccanica
M
s.r.l.
Capitale socciale i.v. 50.000 €
22
Registered Office:
O
Via deel Saliccio, 11A.
210400 Sumirago (VA) Itaaly
Phonee
+39 (0)331 271
2 011
Fax
+39 (0)331 908
9 669
9
Reg. Impresse di Varese/C.F./P.. IVA 02391260029
Società sogggetta a direzione e ccontrollo da VIAR Meccanica
M
s.r.l.
Capitale socciale i.v. 50.000 €
SPECIA
AL APPLICATIO
ONS Flow Tee
Inte
egral Flanged Tee
e (Comp
pact Flangge Sysstem) Miisalignme
ent Flangge 23
Registered Office:
O
Via deel Saliccio, 11A.
210400 Sumirago (VA) Itaaly
Phonee
+39 (0)331 271
2 011
Fax
+39 (0)331 908
9 669
9
Reg. Impresse di Varese/C.F./P.. IVA 02391260029
Società sogggetta a direzione e ccontrollo da VIAR Meccanica
M
s.r.l.
Capitale socciale i.v. 50.000 €
Speciaal Appliications Quick D
Door 24
Registered Office:
Via del Saliccio, 11A.
21040 Sumirago (VA) Italy
Phone
+39 (0)331 271 011
Fax
+39 (0)331 908 669
Reg. Imprese di Varese/C.F./P. IVA 02391260029
Società soggetta a direzione e controllo da VIAR Meccanica s.r.l.
Capitale sociale i.v. 50.000 €
Reference List VIAR Engineering works in conjunction with VIAR® to conceive, design and manufacture items of optimum quality. Special components developed and designed by VIAR Engineering have been employed in numerous projects worldwide. YEAR
PROJECT NAME
DESTINATION
EPC/ CLIENT
END USER
ITEMS SUPPLIED
DIMENSIONS
MATERIAL
2009
HALFDAN B PHASE IV
HBD PLATFORM
DEVELOPEMENT
PROJECT
SINGAPORE
SMOE - MAERSK
SMOE SINGAPORE
SUB SEA SWIVEL/
COMPACT FLANGES
3", 10", 12", 16"
A694 F60
2009
SPM & PLEM SYSTEM
FOR TURKMENISTAN
BLOCK 1 GAS
DEVELOPMENT
TURKMENISTAN
BLUEWATER
ENERGY
SERVICES B.V.
PETRONAS
CARIGALI SDN
BHD
SWIVEL RING
FLANGES
12"
A105N, A694
F52
2009
ARTHIT WELLHEAD
PLATFORM PHASE 1B
THAILAND
KBR - TNS
ENGINEERING
TNS
SUB SEA PIGGABLE
WYE
16”
A694 F60
SPECTABLE BLIND
FLANGES
UP TO 10"
VIAR ELBS
UP TO 18"
SWIVEL RING
FLANGES
UP TO 18"
CON. & ECC.
REDUCERS
UP TO 6"
TEES
UP TO 8"
SUB SEA PIPES
UP TO 24";
SUB SEA QUICK
OPENING CLOSURE
18", 20", 22", 24"
SUB SEA BARRED
TEE
12"X 10", 12"X12",
16"X10", 16"X16",
16"X12", 16"X16",
18"X12", 18"X16",
18"X18", 22"X18"
SUB SEA TEST
RINGS & SWIVEL
RING FLANGES
12", 16", 18", 22"
SUB SEA WN
FLANGES
12", 16", 18", 22"
SUB SEA CONC. &
ECC. REDUCERS
12"X16", 20"X18",
22"X18", 24"X22",
14"X12", 18"X16",
16"X12", 20"X16"
SUB SEA BLIND
FLANGES
16"
SUB SEA SWIVEL
FLANGES
16", 18", 22"
2009
2009
BONGKOT FIELD
DEVELOPMENT
PROJECT - PHASE 3H &
4A WELLHEAD
PLATFORMS FOR
PROCUREMENT
BONGKOT FIELD
DEVELOPMENT
PROJECT - PHASE 3H &
4A WELLHEAD
PLATFORMS FOR
PROCUREMENT
PIG TRAP
THAILAND
THAILAND
PTTEP
PTTEP
PTT
EXPLORATION
&
PRODUCTION
(PTTEP) THAI
NIPPON STEEL
(TNS)
PTT
EXPLORATION
&
PRODUCTION
(PTTEP) THAI
NIPPON STEEL
(TNS)
25
A240 TP321,
A240 TP316L,
A240 UNS
S31803,
SB/B402 UNS
C70600, A516
GR.70, A105N
A694 F60
Registered Office:
Via del Saliccio, 11A.
21040 Sumirago (VA) Italy
Phone
+39 (0)331 271 011
Fax
+39 (0)331 908 669
Reg. Imprese di Varese/C.F./P. IVA 02391260029
Società soggetta a direzione e controllo da VIAR Meccanica s.r.l.
Capitale sociale i.v. 50.000 €
Reference List
YEAR
PROJECT NAME
2008
2008
2008
2008
DESTINATION
EPC/ CLIENT
END USER
ITEMS SUPPLIED
DIMENSIONS
MATERIAL
WATER INJECTION
PROJECT EL FEEL
PLANT NC-174
LYBIA
ENI
MELLITA OIL.
COMPACT FLANGES
32"
A350 LF2
CAIRO WEST PROJECT
SIDI KRIR & EL ATIF
EGYPT
CIMTAS BORUPGESCO
CAIRO WEST
SIDI KRIR & EL
ATIF
WYE PIECES
18”X14”, 16”X16”,
18”X16”, 28”X24”,
32”X24”
A182 F91,
A105
PIGGABLE WYE
PIECES
8"
WN FLANGES
8"
PETROBRAS - FPSO
CIUDADE DE SAO
MATEUS PROJECT 384
BG HYDRA FEED
PROJECT SWP
WELLHEAD PLATFORM
PROJECT N° BGG0801V
2008
MOPUSTOR YME FIELD
DEVELOPMENT
PROJECT
2008
COLBUN CONTRATO
CTCB-001 PUERTO
CORONEL CENTRAL
TERMOELECTRICA A
CARBON
2008
BRAZIL
THAILAND
ABB LUMMUS
WORLEYPARSONS
- CUEL LTD.
PETROBRAS
CUEL LTD. THAILAND
SWIVEL RING
FLANGES
9"
VIAR-LOCK
6” (6VR46), 8”
(8VR72), 12”
(12M102)
SWIVEL RING
FLANGES/ HUBS
13"
SUB SEA SWIVEL
RING FLANGES
4"
HANGER FLANGES
4", 12", 14"
WN FLANGES
4"
MISALIGNMENT
FLANGE
4"
BLIND FLANGES
4"
A105N, A694
F52, A694
F65, A182 F51
A694 F60,
A694 F65
NORWAY
SBM OFFSHORE –
GUSTO
ENGINEERING
TALISMAN
ENERGY
VIAR-LOCK
16” HEAVY DUTY
SERIE (S130R)
A694 F65
CHILE
MAIRE
ENGINEERING
COLBUN
SPECIAL WYE
PIECES
38”X22”, 38”X24”
A182 F91
SARAWAK GAS
DEVELOPMENT
PROJECT
MALAYSIA
PETRONAS
MURPHY
SARAWAK OIL
CO. LTD.
MALAYSIA
SUB SEA PIGGABLE
WYES
8”, 20”
A350LF6 CL.1
BLACKTIP DEVELOPMENT PROJECT 2008 PIPELINE SYSTEM DESIGN AUSTRALIA ENI ‐ SAIPEM ENI AUSTRALIA J P KENNY SUB SEA COMPACT FLANGES 20" A350 LF2, SB/B564 UNS NO6625 THAILAND
CHEVRON – CUEL
CUEL
THAILAND
VIAR-LOCK
3” (3VR27)
A182 F51
USA
GENERAL
ELECTRIC
CIMTAS/
GENERAL
ELECTRIC
ONE BOLT VIARLOCK QUICK
CLOSURE CLAMP
CONNECTOR
1” (1VR11), 1.25”
(1.25VR14), 1.5”
(1.5VR14), 2” (2VR20)
A182 F304L
2007
CUEL PHASE 37
INTEGRATED
WELLHEAD
PLATFORMS OIL AND
GAS 3 YEAR
CONTRACT
2007
CLAMPED PIPING
CONNECTION
QUALIFICATION
REQUIREMENTS
26
Registered Office:
O
via deel Saliccio, 11A.
210400 Sumirago (VA) Itaaly
Phonee
+39 (0)331 271
2 011
Fax
+39 (0)331 908
9 669
Reg. Impresse di Varese/C.F./P.. IVA 02391260029
9
Società sogggetta a direzione e ccontrollo da VIAR Meccanica
M
s.r.l.
Capitale socciale i.v. 50.000 €
Refere
ence Lisst YEA
AR
PROJECT NAME
200
07
U
11442 RFK UPGRADE
PROJECT SH
H/CEPSA
BLOCK 406A
A BERKINE
BASIN
ALGERIA
SU TU FIELD
D
DEVELOPME
ENT SU TU
VAN CUU LO
ONG
VIETNAM
200
07
200
07
BONGKOT FIELD
F
DEVELOPME
ENT 3G PIG
TRAP
D
DESTINATION
THAILAND
EPC/ CLIENT
SONATRACH
J. RAY
MCDERMOTT AS
M
SIA
PACIFIC P.L
PTTEP- THAI
L
NIPPON STEEL
END USER
ITEMS
S SUPPLIED
DIMENSIONS
S
MATERIIAL
VIA
AR-LOCK
4” (4VR31), 6””
(6VR46)
A694 F6
65,
AISI414
40,
A182 F5
52,
A182 F60
COMPAC
CT FLANGES
14”
A694 F52
SUB SEA SWIVEL
RING FLANGES
24”
A694 F5
52,
A105, A6
694
F65
SONATRA
ACH/
CEPSA
A
Y
J. RAY
MCDERMOTT
TERBAYSWAT
SINGAPO
ORE
PTT
EXPLORAT
TION &
PRODUCT
TION
(PTTEP) THAI
T
NIPPON ST
TEEL
(TNS))
P
PIPES
UP TO 20"
WN FLANGES
F
UP TO 18"
CONC
CENTRIC &
ECC
CENTRIC
RED
DUCERS
14"X12", 16"X12
2",
18"X16", 20"X16"
BARR
RED TEES
12"X12", 16"X10
0",
16"X12", 16"X16"
SWIV
VEL RING
FL
LANGES
UP TO 16"
QUICK
K OPENING
CLOSING HUB &
D
DOOR
UP TO 20"
How to
o reach
h us VIAR Engineeering can bee easily reached by car and is located
d close to thee A8 highwayy (from Milan to Varese). The closest exitt being Solbiiate Arno. Ro
oad signs will guide you tto the compaany. Milan Malpensa Airportt is only 15km
m away. You are most welcome to come and
d visit us in Quinzano
o di Sumiraggo. Please do not hesitate tto contact uss for any technical or commeercial information. VIAR ENGIN
NEERING Head offices Via del Salicccio, 11/A 21040 Sumiirago (VA) Italy Phone: (+39
9) 0331.271.011 Fax: (+39) 0
0331.908.669
9 27 A105, A3
350
LF2, A6
694
F60, A182
LADD
F316L, CL
OVERLA
AY IN
SS316
6
VIAR ENGINEERING srl
Via del Saliccio, 11A 21040 Sumirago (VA) Italy Tel: (+39) 0331 271 011 Fax: (+39) 0331 908 669 Email: [email protected] www.viar.it