Parametri posta di Ingegneria
Transcript
Parametri posta di Ingegneria
Pagine 2-11 premi qui Page 12-21 click here Configurazione di Outlook Andare sotto impostazioni account, scegliere cambia, poi inserire i parametri come di seguito riportati: 993 587 Mario Rossi [email protected] rossim Scegliere server della posta in uscita e selezionare come segue: Mario Rossi [email protected] rossim Configurazione di Mail Andare sotto il menu Mail e poi sceglier preferenze, poi inserire i parametri come di seguito riportati: In Server posta in uscita (SMTP) cliccare sul menu a tendina e poi scegliere “Modifica elenco del server SMTP”. [email protected] Mario Rossi rossim Inserire i parametri come di sotto evidenziati: rossim Configurazione di Mozilla Thunderbird Andare sotto il menu Opzioni e scegliere impostazione account, poi inserire i parametri come di seguito riportati: Mario Rossi [email protected] rossim Configurazione Apple iPhone Andare sotto il menu Opzioni della posta, poi inserire i parametri come di seguito riportati: rossim Configurazione Android Nei parametri della posta in uscita inserire i valori come di seguito riportati: rossim Configurazione di Pine Premere (S)etup poi (C)onfig ed inserire i parametri come di seguito riportati: Es: rossim Configurazione di altri client di posta Nel caso di configurazione di client di posta diversi da quelli elencati, riepiloghiamo i parametri di posta del server mail di Ingegneria da settare: SERVER DI SPEDIZIONE a) nome host: smtp.ing.unitn.it b) nome utente: (credenziale per la posta di ingegneria) c) password: (riferita alla posta di ingegneria) d) TLS: abilitato. e) autenticazione: nome utente e password f) porta server: 587 SERVER POSTA IN ARRIVO (CONSIGLIATO) a) nome host: imap.ing.unitn.it b) nome utente: (credenziale per la posta di ingegneria) c) password: (riferita alla posta di ingegneria) d) SSL: abilitato. e) autenticazione: nome utente e password f) porta server: 993 SERVER POSTA IN ARRIVO (SCONSIGLIATO) Per configurare POPs impostare come porta la 995. Outlook configuration From account setup, select «change» and insert the parameters as follows: Choose outmail server and select as follows: Mail configuration From Mail menu, select «preferences», and insert the parameters as follows: Select outmail server (SMTP) click and select «Edit list of SMTP server» from the pull-down menu. Enter the parameters as shown below : Mozilla Thunderbird configuration from the menu Option choose «account setup», and insert the parameters as shown below: Apple iPhone configuration insert parameters as shown below from mail option menu: Android configuration Insert value as shown below into the outmail parameters : Pine configuration Click on (S)etup then (C)onfig and insert parameters as shown below : Other electronic mail client configuration In the case of configuring mail clients other than those listed, we summarize the parameters of the email server to be set in Engineering : DELIVERY SERVER a) host name: smtp.ing.unitn.it b) user name : (credential for e-engineering mail) c) password: (referred to e-engineering) d) TLS: enabled. e) authentication : username and password f) server port: 587 INCOMING SERVER (RECOMMENDED) a) host name: imap.ing.unitn.it b) User name: (credential for e-engineering mail) c) password: (credential for e-engineering mail) d) SSL: enabled. e) credential for e-engineering mail : username and password f) Server port: 993 INCOMING SERVER (NOT RECOMMENDED) To setup POPs choose as port 995.