CX-5100AH
Transcript
CX-5100AH
CX-5100AH HDMI with Audio Amplifier Operation Manual CX-5100AH TABLE OF CONTENTS 1. Introduction ........................................................................................ 3 2. Features ............................................................................................... 3 3. Remote Control ................................................................................... 3 4. Hardware Descriptionl ....................................................................... 4 4.1 Front View....................................................................................... 4 4.2 Rear View ....................................................................................... 5 5. LCM Operation ......................................................................................6 5.1 LCM Menu................................................................................... 6 5.2 LCM Menu 1................................................................................ 7 5.3 LCM Operation table................................................................. 8 6. Audio output format table................................................................. 8 7. Connection and Installation.............................................................. 10 8. Specifications...................................................................................... 10 1. Introduction This is the most advanced solution for HDMI with Audio Amplifier. That supports three HMDI input and two HDMI output, also supports Analog/Digital audio input/output. Simply select from the LCM menu or remote control to select desire combination. 2. Features Compliant with HDMI 1.2, HDCP 1.1 and DVI 1.0 specifications. Full HD 1080p supported. Supports a wide range of PC and HDTV resolutions from VGA to UXGA and 480p to 1080p. Maximum resolution bandwidth is 165MHz. Built-in EDID simulator and HDCP keyset allows each output to work independently in connecting to a HDMI display. Lip Sync delay (up to 480ms can be split up to 4 channels). Supports Concert Hall, Jazz Club, Rock Concert, Cathedral, Karaoke, Stadium, Echo, Studio and 3D panorama audio effects. Easy to install and simple to operate. 3. Remote Control POWER 1 1 2 3 MUTE ► ◄ 3 2 DIGITAL AUDIO IN OPT1 OPT2 COAX1 COAX2 4 ANALOG AUDIO IN 1 2 3 4 5 7 MULTI CH 2CH HDMI LPCM VOLUME MENU ► ◄ 1. Power: Press to turn ON/OFF the system. When power on the LED will indicate in Green 3 color, when power off the LED will indicate in Red color. 2. Mute: Press to mute the audio, press again to turn ON the audio. 3. HDMI in: Select the desire HDMI input source. 4. Audio in: Select the desire audio input source. 5. Analog audio in: Select the desire stereo analog input source. 6. HDMI LPCM: Select the audio LPCM output from HDMI ports for 2 Channels or Multi6 Channels. 7. +/-: Press to adjust the volume, Press [ - ]: to deouace the volume, the minimum lovels 8 Press [ + ]: to increase the volume, the maximum levels up to+64. 8. Menu/ / /◄ / ►: Press [MENU] enter LCM menu and sub-menu, From Sub-menu. Press[/ / /◄ / ► ]to adjust Bass/Treble/ Loundness/Lipsync LR,c and defanlt Setting. HDMI IN CR-36 4. Hardware Description 4.1 Front View Power 1 2 3 Home Video In Audio In Menu 4 5 6 VOLUME + - 7 8 1 Power indicator: When power on the LED will indicate in Green color, when power off the LED will indicate in Red color. 2 Power switch: Turn the system ON/OFF. 3 IR sensor. 4 Home menu: Press the button to enter the LCM menu selection. For the LCM menu selection please refer to “section 5. LCM Operation”. 5 Video in: Press [Video in ▲] switch between different input video sources (HDMI 1, HDMI 2, HDMI 3). 6 Audio in: Press [Audio in ▼] switch between different input audio sources (Optical 1, Optical 2, Coaxial 1, Coaxial 2, L/R 1, L/R 2, L/R 3, L/R 4 or HDMI). Please refer to “section 5. LCM Operation”. 7 Volume -/+: Press [-] / [+] to adjust the volume up/down. 8 LCM display. 4 6 4.2 Rear View DIGITAL IN 5.1CH AMP OUTPUT FRONT L/Lt R/Rt L REAR R CENTER SUBWOOFER OPTICAL HDMI INPUT DIGITAL OUT COAXIAL 8 1 HDMI OUT 2 3 1 (TOTAL) 1 2 1 2 OPTICAL COAXIAL CENTER L 2 DC 12V R 1 2 3 ANALOG INPUT 1 2 3 4 5 7 4 FRONT REAR SUB 5.1CH OUTPUT 9 10 1 5.1CH AMP out: Connect the Front/Rear/Center/Subwoofer to the Speakers. 2 Optical 1/2 in: Connect the Optical input ports to the Optical output port of your source equipments. Only support LPCM 2ch input when input source is Dolby 2ch or 5.1ch the system will sound less and the LCM will show "NonPCM". 3 Coaxial in: Connect the Coaxial input ports to the Coaxial output port of your source equipments. Only support LPCM 2ch input when input source is Dolby 2ch or 5.1ch the system will sound less and the LCM will show "NonPCM". 4 Optical out: Connect the Optical output port to the input port of your audio equipment. Only support LPCM 2ch. 5 Coaxial out: Connect the Coaxial output port to the input port of your audio equipment. Only support LPCM 2ch. 6 HDMI in: Connect the HDMI 1 ~ 3 input ports to the HDMI output port of your source equipments. The HDMI audio output are follow HDMI input Sources. 7 HDMI out: Connect the HDMI 1 ~ 2 output ports to the HDMI input port of your display or Amplifier. 8 Analog audio input: There are four L/R input connectors; it can connect to four different stereo audio sources. 9 5.1 CH out: Connect the Front/Rear/Center/Subwoofer to the Amplifier. 10 Power: Plug the 12VDC power supply into the unit and connect the adaptor to AC wall outlet. 5 V:HDMI_3 A:Opt_1 L:+16 V:HDMI_2 A:Opt_1 L:+16 V:HDMI_1 A:Opt_1 L:+16 ↓ ↓ V:HDMI_1 A:Opt_2 L:+16 ↓ ↓ V:HDMI_1 A:Coax_1 V:HDMI_1 A:Coax_2 L:+16 V:HDMI_1 A:LR_1 L:+16 ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ 6 ↓ ↓ ↓ Default On >Press MENU Exit ↓ ↓ Wait... ↓ Load Default Wait… Main menu V:HDMI_1 Start Menu Display A:Opt_1 ↓ ( Manual ) L:16 Factory Setting - OFF Factory Setting - ON ↓( Manual ) Default +00 Default +00 LipSync C +16 >Press MENU Exit ↓ Default Off >Press MENU Exit 9. Factory setting Default +00 LipSync LR +16 >Press MENU Exit ↓ LipSync C +00 >Press MENU Exit 8. LipSync Center Default +00 Loudness +16 >Press MENU Exit ↓ LipSync LR +00 >Press MENU Exit 7. LipSync LR Default +00 ↓ Loudness +00 >Press MENU Exit 6. Loudness Adjustment Treble +12 >Press MENU Exit ↓ Treble -12 >Press MENU Exit 5. Treble Adjustment Default +00 Bass +12 >Press MENU Exit ↓ Bass -12 >Press MENU Exit 4. Bass Adjustment Default +16 V:HDMI_1 A:Opt_1 L:+64 ↓ V:HDMI_1 A:Opt_1 L:+00 ↓ L/R 3 input V:HDMI_1 A:Opt_1 L:+16 L/R 4 input ↓ V:HDMI_1 A:HDMI L:+16 HDMI input MENU:Switch between Main Manual or Sub-Manual or Confirm the selection. ←→ :Press ←→to move the cursor or adjust the value. ↓↑ :Press ↓↑to move the cursor. Operation instruction: V:HDMI_1 A:LR_3 L:+16 ↓ L/R 2 input ↓ ↓ 3. Volume Adjustment V:HDMI_1 A:LR_2 L:+16 ↓ ↓ Optical 1 input Optical 2 input Coaxial 1 input Coaxial 2 input L/R 1 input V:HDMI_1 A:Opt_1 L:+16 2. Audio input selection ↓ L:+16 HDMI 3 input HDMI 2 input HDMI 1 input 5.1 LCM Menu 1. Video input selection 5. LCM Operation ↓ 7 Wait Default LipSync C LipSync LR Loudness Treble Sub Menu Bass Volume Audio In Main MenuVideo In 5.2 LCM Menu 1 H s r 1 a 0 B υ P H r r r r r a i o W a L f e υ P D p i υ P L p i υ P L u o υ P L e r υ P 2 t t t d e a e S e S e d e b e s 3 . s u s y s y s n s l s 4 t D M O p : 4 D M O p : T 3 D M O p A : 2 H V : : A A : V 1 0 V 6 6 1 έ 1 έ 1 έ . D s l s n s n s e s e s . e t c c s Ё 1 2 5 έ I έ I _ I 5 E 8 8 f M M M M s M a E O E C E L E E Ё 1 2 M 7 1 1 1 7 u N f N N R N : Ѐ 1 6 : Ѐ 1 6 : Ѐ 1 6 U U E x Ѐ 0 0 E x l U f U t E x E x Ѐ 0 0 U U E x E x i i i i i i t t t t t t A B C D E F L L L A B C D E F Ѐ 0 0 N N 9 9 0 1 a r o i i e υ P D υ P L υ P L υ P L υ P T υ P B r f r p r p r u r e r s 2 e a e S e S e d e b e s 3 s u s y s y s n s l s 4 5 6 s l s n s n s e s e s t c c s Ѐ 1 2 E 8 M M M M s M E O E C E L E E Ѐ 1 2 M 7 U U N n N N R N E x Ѐ 1 6 E x U U E x E x Ѐ 1 6 U U E x E x i i i i i i t t t t t t A B C D E F Ѐ 1 6 N N 9 5.3 LCM Operation table Function Level Suggestion level Bass -6 ~ +6 0 Treble -6 ~ +6 0 Loudness -6 ~ +6 0 LipSync LR 0 ~ 16 0 LipSync C 0 ~ 16 0 Default Off/On off LipSync can delay120ms +/5% for each mono channel. 6. Audio output format table Output Jacker & Format HDMI_1 Out HDMI_2 Out OPT Out COAX Out 6 RCA Line Out PCM 2 CH PCM 2 CH HDMI_1 PCM 5.1 PCM 5.1 Real 5.1 (Downmix) (Downmix) In CH / Mute CH / Mute CH / Mute / Mute / Mute Input Jacker & Format PCM 2 CH PCM 2 CH PCM HDMI_2 PCM 5.1 PCM 5.1 Real 5.1 (Downmix) (Downmix) 5.1 CH In CH / Mute CH / Mute CH / Mute / Mute / Mute PCM 2 CH PCM 2 CH HDMI_3 PCM 5.1 PCM 5.1 Real 5.1 (Downmix) (Downmix) In CH / Mute CH / Mute CH / Mute / Mute / Mute HDMI_1 PCM 2 CH PCM 2 CH PCM 2 CH PCM 2 CH Virtual 5.1 In / Mute / Mute / Mute / Mute CH / Mute PCM 2 HDMI_2 PCM 2 CH PCM 2 CH PCM 2 CH PCM 2 CH Virtual 5.1 CH In / Mute / Mute / Mute / Mute CH / Mute HDMI_3 PCM 2 CH PCM 2 CH PCM 2 CH PCM 2 CH Virtual 5.1 In / Mute / Mute / Mute / Mute CH / Mute 8 PCM 2 CH PCM 2 CH Virtual PCM 2 CH PCM 2 CH OPT_1 In / 5.1 CH / / 5.1 CH / 5.1 CH / / Mute / Mute Mute Mute Mute Input Jacker & Format PCM 2 CH PCM 2 CH OPT_2 In / 5.1 CH / / 5.1 CH / Mute Mute PCM 2 CH PCM 2 CH PCM 2 CH COAX_1 / 5.1 CH / / 5.1 CH / In Mute Mute Virtual PCM 2 CH PCM 2 CH 5.1 CH / / Mute / Mute Mute Virtual PCM 2 CH PCM 2 CH 5.1 CH / / Mute / Mute Mute PCM 2 CH PCM 2 CH Virtual PCM 2 CH PCM 2 CH COAX_2 / 5.1 CH / / 5.1 CH / 5.1 CH / / Mute / Mute Mute Mute Mute PCM 2 CH PCM 2 CH Virtual RCA PCM 2 CH PCM 2 CH / 5.1 CH / / 5.1 CH / 5.1 CH / Line_1 In / Mute / Mute Mute Mute Mute PCM 2 CH PCM 2 CH RCA / 5.1 CH / / 5.1 CH / Line_2 In Mute Mute Line 2 CH PCM 2 CH PCM 2 CH RCA / 5.1 CH / / 5.1 CH / Line_3 In Mute Mute Virtual PCM 2 CH PCM 2 CH 5.1 CH / / Mute / Mute Mute Virtual PCM 2 CH PCM 2 CH 5.1 CH / / Mute / Mute Mute PCM 2 CH PCM 2 CH Virtual RCA PCM 2 CH PCM 2 CH / 5.1 CH / / 5.1 CH / 5.1 CH / Line_4 In / Mute / Mute Mute Mute Mute Note: 1. 6 ports of RCA output only support 5.1 Channels. 2. This system can’t support compress audio input (AC3 or DTS), if the audio sources are contain compress audio the output from Optical, Coaxial and 6 RCA are soundless and this is normal phenomena. 9 7. Connection and Installation 8. Specifications Video input ports Digital audio input ports Analog audio input ports Video output ports Digital audio output ports Analog audio output ports Power Supply Dimensions (mm) Weight(g) Chassis Material Silk Skin Color Operating Temperature 3 x HDMI 2 x Coaxial, 2 x Optical 4 x Audio R/L 2 x HDMI 1 x Coaxial, 1 x Optical 5.1 channels output clips (6ohm speakers at 1 Vrms 1KHz, the output power is around 12wx6.) (8ohm trumpets, the output power is around 9wx6.) 12V/6A DC (US/EU standards, CE/FCC/UL certified) 171(W) x 356(D) x 70(H) 1764 Aluminum Silver Operating from 0°C ~ 40°C 10