Logistic - SCL - Ingegneria strutturale

Transcript

SCL Profile
SCL Ingegneria Strutturale di Calzolari S. Lacavalla S. Sesana S.
Via Carissimi, 12 - 20124 Milano | Sede Legale: Via Volta 3, 22100 Como
e-mail [email protected] | tel. +39 02 67073049 | web www.scl-ingegneria.it
CONTENTS
CONTENTS........................................................................................................................... 2
About SCL ................................................................................................................................................................. 5
Partners .................................................................................................................................................................... 6
Stefano Calzolari ................................................................................................................. 6
Silvano Lacavalla ................................................................................................................. 9
Stefano Sesana ................................................................................................................. 10
Profile ..................................................................................................................................................................... 12
Areas of competence........................................................................................................ 12
Mission.............................................................................................................................. 13
Values ............................................................................................................................... 14
Areas of competence ............................................................................................................................................. 15
Civil structures .................................................................................................................. 15
Industrial structures ......................................................................................................... 16
Logistics ............................................................................................................................ 16
Inspections, tests and expertise ....................................................................................... 17
Stress analysis ................................................................................................................... 17
Testimonials ........................................................................................................................................................... 18
SCL Ingegneria Strutturale
[email protected] | +39 02 67073049 | www.scl-ingegneria.it
-2-
FROM THE PORTFOLIO ........................................................................................................................................... 19
Civil structures ........................................................................................................................................................ 20
VALENTINO: Flagship Store – 39 Old Bond Street, London.............................................. 21
VALENTINO: Boutique show room - Rue Saint Honoré, Paris .......................................... 23
VALENTINO: Flagship store – Piazza di Spagna, Roma ..................................................... 25
VALENTINO: Flagship Store – 5th Avenue, New York ...................................................... 27
VALENTINO: Boutique - Via de Tornabuoni, Firenze ........................................................ 29
VALENTINO: Boutique – Via Montenapoleone, Milano ................................................... 30
CELINE: Boutique Céline – Avenue Montaigne, Paris....................................................... 32
DOLCE & GABBANA: Boutique – Corso Venezia 7, Milano............................................... 34
COventidue S.r.l.: Residential Building, Corso XXII Marzo, Milano .................................. 36
PALAZZO APORTI: via Ferrante Aporti, Milano ................................................................ 38
DEUTSCHE BANK: headquarters, Napoli .......................................................................... 41
BUILDING via Durini, Milano............................................................................................. 43
UNDERGROUND PARKING: Via Turati, Milano ................................................................ 44
PALAZZO LEONE, Corso Vittorio Emanuele II 159, L’Aquila ............................................. 45
HOSPITAL OF VIMERCATE, Milano ................................................................................... 46
AEROPORTI MILANO – Terminal 2 Malpensa ................................................................... 47
Industrial structures and Stress analysis ................................................................................................................ 48
Arvedi Steelworks in Cremona – Fumes treatment ......................................................... 49
Valsabbia Steelworks - Odolo (BS) – Fumes treatment.................................................... 50
-3-
Exhaust fumes treatment scrubbers ................................................................................ 51
IREN Energia – Torino Nord – Air Cooling Condenser ...................................................... 52
Mini hydro-elettric power plant – Comuni di Gera Lario, Trezzone e Montemezzo (CO) 53
ILVA – Taranto .................................................................................................................. 54
PORTOVESME: Cadmium recovery Plant ......................................................................... 55
PORTOVESME: Progetto di Ampliamento dello stabilimento .......................................... 56
ALSTOM: Endesa Generation Litoral 2 Power Plant ......................................................... 57
SPIG: Hitachi Zosen - Air cooling condenser..................................................................... 58
Hellenic Petroleum: Nuovo venturi scrubber................................................................... 59
ASTALDI Canada: Muskrat Falls Project............................................................................ 60
EXPO 2015 – Coperture metalliche cluster BMD-ADZ-CRT-ISL ....................................... 61
Logistic .................................................................................................................................................................... 62
Inspection, test and expertise .......................................................................................... 70
PORTA VOLTA Fondazione Feltrinelli, Milano ................................................................. 71
POLIRONE MONASTIC BUILDING COMPLEX ..................................................................... 73
VILLA REALE, Monza ......................................................................................................... 75
NEW HOSPITAL BUILDING OF NIGUARDA, Milano ........................................................... 76
-4-
About SCL
SCL is an Engineering firm, which provides structural and civil engineering services and
consulting world-wide.
The Company, based in Milan, was founded in 1992 by Ing. Stefano Calzolari and Ing.
Silvano Lacavalla; Ing. Stefano Sesana joined the company in 1997.
The organization chart of SCL refers to a team of collaborators (21) -mainly structural
engineers - whose number has grown steadily over the years and to a wide network of
external consultants, whose skills cover various areas of competences. This enables SCL
to offer complete "turnkey" projects and Project Managing in complex and diversified
areas.
-5-
Partners
Stefano Calzolari
Founding member
Graduated in Civil Engineering at Politecnico di Milano in 1985
Enrolled in the professional register of the Milano Order of Engineers at n. 15110
Since February 2015:
President of “Agenzia Nazionale per la Certificazione Volontaria delle Competenze
CERT-ING” (National Agency for the voluntary certification of competences CERT-ING) of
the National board of Engineers (CNI).
Since September 2011:
Member of VIA (national committee of the Ministry of Environment and Protection of
Land and Sea).
Since 2009:
President of Milan Institute of Engineers, where he was previously Counselor and
President of “Professional Training and updating” and “Quality Certification”
Committees.
1999-2002:
President of Formation and Professional Development at Milan Order of Engineers.
2002-2006:
-6-
Consultant of CTA (board of technicians specialized in steel constructions).
2002-2012:
President of CEN TC 344 “Steel Static Storage System” from 2002 to 2011. Member of
ERF Board ERF – European Racking Federation.
Since October 1998:
Inclusion in the list of Structural Check Engineers at n. 2598 for the following categories:
“Buildings and supplies”, “Complex Structures” e “Reinforced Concrete Structures”.
Since October 1996:
Trainer on Safety Management in Construction Sites (D.lgs. 494/96 e 528/99) specialized
in Steel Structures at Politecnico di Milano and Milan Institute of Engineers.
Since October 1996:
Member of IGQ Committee (Italian Institute of Quality Guarantee).
Since July 1996:
Italian representative in the International committee F.E.M. Section X (now ERF –
European Racking Federation), specialized in industrial raking systems and steel
structures for storage warehouses.
Nel 1995
Consultant in Quality Management (ISO 9000) for Italian Association of Steel Builders. In
November 1995 he passed the Final Examination to become “Evaluator of Quality
Systems”.
-7-
Since 1992:
Consultant to ACAI (Italian Association of Steel Builders) as specialist of steel structures
for the Racks Section, the Scaffold Section and the Stakes Section. Many publications in
magazines "Costruzioni Metalliche" and “Geoide”, in the structure section.
1991-1992:
Consultant to Falck Lamiere, as promoter of steel beams made of steel plates.
1991-1992
Science of the Construction auxiliary assistant at Politecnico di Milano (Prof. Leo Finzi).
Since 1991:
Independent professional for civil and industrial building design. Enrolled in the
Professional Register of the Milano Order of Engineers since 1987 (n° 15110).
From 1986 to 1991:
Professional training at Studio BCV Progetti – Milano. Structural Engineering project firm
of Prof. Ing. Giulio Ballio, Dott. Ing. A. Vintani, Dott. Ing. C. Raffa.
-8-
Silvano Lacavalla
Founding member
Graduated in Civil Engineering at Politecnico in Milan in 1986
Enrolled in the professional register of the Milano Order of Engineers at n. 15175
Qualified as Construction and safety Manager (D. Lgs. 494/96, poi 528/99 ora 81/08).
In 2015:
Q-Ing Certified Engineer, by the Order of Engineers of Milano.
From 2010:
-Member of “Commissione Bandi e gare d’appalto” of the Order of Engineer of Milano.
- Professor on contract at Civil and Environmental Engineer Department of Politecnico di
Milano, for the section Science of the Construction.
From 2005:
Member of the European Working Group 2 for the for the review of the Norm for the
industrial racking systems (CEN-TC 344).
From April 1999 to September 2000: scientific executive director of the scientific
magazine “A&C – Analisi e calcolo”.
From September 1998:
Enrolled in the register of “Collaudatori della Regione Lombardia” at n° 2597, for the
categories: buildings and related supply, complex structures and reinforced concrete
structures.
Qualified instructor ALGOR FEA System.
ACAI Instructor of CISI software for structural calculation of industrial racking systems
Science of the Construction auxiliary assistant at Politecnico di Milano.
-9-
Stefano Sesana
Partner of SCL since January 1997
Graduated in Civil Engineering at the Politecnico di Milano in 1989
Enrolled in the register of the Order of Engineers of Milano n° 16176
From 2015: Q-Ing Certified Engineer at level 2 in the field of structures with the
following specialization: Design, Construction supervision and testing of metal and r.c.
structures and of industrial racking systems.
From 2014 and currently: Joint secretary of the TC 355 WG1 for the review of the Norm
EN15512 for the seismic design of pallet racks.
From 2013 and currently: Member of the Technical Committee 21 - SC 03/GL 01
"Scaffalature industriali metalliche" as expert.
From 2011 and currently: Convener of the TC 355 WG5 developing the new Norm
EN16681 for the seismic design of pallet racks.
From 2010 and currently: Member of the Product Committee of IGQ (Istituto Garanzia
Qualità, Italian Notified Body) for the CE certification of construction products.
From 2005 and currently: Member of several working groups of FEM Section X “Racking
and Shelving” and ERF (European Racking Federation) as expert of seismic and
structural engineering and technical representative of the Italian Association of racks
Manufacturers:
• Working Group 2 “Drive-in” for the formulation of the Norm FEM 10.2.07 (2012)
- 10 -
•
Working Group "Seismic Design" of FEM Section X for the design of pallet racks in
seismic zones and editor of the Norm FEM 10.2.08 (2010).
From 2003 to 2013:
Consultant of ACAI (Italian Association of Manufacturers Steel) as specialist in seismic
engineering of steel structures for the Group Racking Manufacturers.
From 2004 to 2008:
Technical Advisor of ACAI (Italian Association of Steel Manufacturers) section lighting
Poles and Towers. Development of specialized an automatic procedure for the design
and verification of poles for lighting.
From 2005 to 2006:
Technical Advisor of IGQ (Istituto Garanzia Qualità, Italian Notified Body) for the CE
certification of lighting columns; activities subsequently developed by other engineering
employee of SCL Ingegneria Strutturale.
March 1998:
Attendance to the AICQ training for “Evaluator of Quality Systems ISO 9000”, passing
the final test (post graduate studies).
From 1989 to 1995: freelance engineer at BCV Progetti Srl of Milano.
- 11 -
Profile
Areas of competence
Structures for industrial plants: new plants, revamping of existing plants, design of
components and equipment.
Seismic engineering: risk assessment, design of retrofit works.
Public and private building works: architectural and structural design, project managing,
tests.
Public works and infrastructures: general direction of works, project management,
financial and administrative supervision.
Large restructuring works of ancient and historical buildings: structural design, study of
the execution sequences, direction of works.
Legal expertise: forensic and extra-judicial.
Structures for Logistics: industrial racks and shelves, silos and clad warehouses,
warehouses safety, research and development of components and systems,
participation to drafting norms and technical standards.
Stress analysis: special studies and analyses using advanced tools and methods to
evaluate the behaviour and stress levels in structures and components.
- 12 -
Mission
The primary goal of our work is the complete satisfaction of the Client.
The positive approach to research and study, the aptitude to problem solving and the
deep knowledge of the Italian and the international norms and standards drive SCL to
develop and maintain up-to-dated his wide knowledge and know-how. Solid theoretical
and technical skills enable SCL to offer complete and accurate services, with great
attention to each specific detail.
- 13 -
Values
We achieve our goals, working with enthusiasm on projects or providing services, with
complete personal and professional dedication.
Our core values are:
Partnership with the Client
SCL considers the customer a partner and the job a shared goal. For us the trust based
relationship with the Client who, we hope, will appreciates our professionalism and the
quality of our services is an added value.
Knowledge and competence
The up to date knowledge, technical skills and tools are the key assets of SCL and the
allow us to do our job successfully reaching the objectives.
Collaboration, satisfaction and reliability
SCL trust in long lasting partnerships based on the professional, technical and economic
progress and satisfaction of all parties involved.
For this reason, we have established solid relationships with the majority of our Clients.
The Team
Our passion for the job is also expressed in the training of the new generations. The
skilled team of senior collaborators supports a group of young, professional and
motivated engineers that, over the years, acquire roles as protagonists within the
organization. The full time team is now composed by 24 professionals (15 Engineers, 2
Architects, 1 Surveyor, 4 Technicians, 2 Clerical workers).
- 14 -
Areas of competence
Civil structures
The analysis and the understanding of the Client’s needs, the technical skills and the
flexibility in finding solutions drive SCL on the process from the concept to the
finalization of a project. The Client is always supported by a creative design, innovative
and adapted both to functional and architectural needs.
The knowledge achieved working with market leader construction companies, the
professional activities "in the field", the participation in the organizations and entities
responsible for the development of technical regulations in the various fields of the
structural engineering, are the basis for the comprehensive and multidisciplinary
understanding of the building process and of the main issues of complex construction
works made of steel, concrete, wood and other materials, in almost all areas of civil and
industrial engineering.
Relying on established partnerships, SCL is also able to develop plant and functional
projects and to provide specialized advice in different areas of design and construction
process, with the possibility of providing a complete "turnkey" design, including all the
information necessary to complete the construction work.
Thanks to the experience gained in the work planning, in the coordination between
different activities, in the interface between Companies and Professionals and in the
organization of the construction site, SCL performs general and specialized supervision
of construction works.
- 15 -
Industrial structures
SCL designs civil works, facilities and equipment of industrial plants in collaboration with
leading engineering Companies in Italy and abroad. Thanks to the skills acquired
through experience on processes and equipment design, SCL provides effective
interaction with all parties involved.
The mechanical design of the plant and of the equipment – from the "on the field"
study of the layout to the detail design – has been recently developed in the fields of
gas and fume treatment in various industrial sectors. Relevant experience has been
achieved in the areas of energy, steel and cement production and in the chemical
Industry.
Also in this area of competence the deep knowledge of the International Norms is an
important added value for customers working at a global level.
Logistics
SCL has been operating for more than twenty years in the research and design of the
structures and systems in the logistics industry.
The wide-range of skills and experience in this specific field, have also been developed
especially thanks to constant research and participation in the formulation of the
technical regulations.
The professional activity is carried out in collaboration with the major companies
operating in various areas of logistics and distribution, including manufacturers of
industrial racks and shelving, suppliers of automation systems, or companies where
logistics plays a relevant role.
In 2014 SCL created, within its organization, SCL-Log a specific section, which heads the
activities within the facilities for logistics. More info at www.scl-log.it.
- 16 -
Inspections, tests and expertise
Inspections, tests and technical expertise play a relevant role among the activities of
SCL.
Static testing on construction works
SCL has extensive experience in the operations of static testing and commissioning of
the works in Italy according to the 1086/71 in the field of civil and industrial steel and
concrete constructions, shelving and industrial warehouses.
Technical and administrative inspections and approvals
SCL operates in the area of technical and administrative inspections and approvals,
which regulates the official approvals of public works, carrying out legal functions within
the inspection and approval committees, according to the requirements of the Italian
statutory regulations.
Legal and technical expertise
The experience achieved in various fields of engineering, as well as the knowledge
acquired at the level of legislative and statutory framework, provides to SCL the
theoretical and applicative basis to accomplish complex forensic and extra-judicial
technical advice and expertise.
Stress analysis
Stress analysis is a tool used to solve complex problems and to perform advanced
investigations, when required, for specific optimization needs.
For many years, we have approached this type of integrated analysis, mainly for steel
structures, equipment and components. The main used programs are HSH Straus7 and
Autodesk Robot Analysis.
- 17 -
Testimonials
Private Companies
ABB Sae Sadelmi
Amazon
Boldrocchi Ecologia
Casa Damiani Gioiellerie
Celine S.p.A.
COIMA S.r.l.
COMECA S.p.A. - S.T.F.E.
De Cardenas S.p.A.
DEGREMONT SPA
Deutsche Bank
Dolce & Gabbana
Durini 1 S.r.l.
F&B S.p.A
Foster Wheeler Italiana
Frans Maas
Fujikura Ltd.
Gruppo Marcegaglia
HAMON THERMAL EUROPE
Hamon Research Cottrell Italia
Hines Italia S.r.l.
Inarcheck
Architects
Citterio & Partners
David Chipperfield Architets
Foster &Partners
Freyrie & Pestalozza
Studio 3
Studio Dordoni
BAM Design
Italimpianti
Ikea
KEC International Ltd.
LMI - Lazzari Montaggi Industriali
Lucchini Impianti S.p.A.
Metalcoop
Miroglio
PIME
Pomellato S.p.A.
Portovesme S.r.l
Procter & Gamble
Ratti S.p.A.
SIRTI S.p.A.
SPX Cooling Technologies
Studio Geotecnico Italiano
Turbosonic Inc.
Tekne S.p.A.
Valentino S.p.A.
Yves Saint Laurent
Public Corporations
AO Vimercate Salute
AO Ospedale Niguarda Ca’ Granda
AO Ospedale Papa Giovanni XXIII
Comune di Abbiategrasso
Comune di Monza
Infrastrutture Lombarde S.p.A.
SEA Aeroporti di Milano.
- 18 -
FROM THE PORTFOLIO
In order to give a 360° view of our activities we have, hereby, chosen from our portfolio
a selection of representative projects focusing on the main areas of competence:
- Civil Structures
- Industrial Structures and stress analysis
- Logistic
- Inspections, test and expertise
More projects at www.scl-ingegneria.it
- 19 -
Civil structures
- 20 -
VALENTINO: Flagship Store – 39 Old Bond Street, London
Client:
Valentino S.p.A.
Architectural Design:
David Chipperfield Architects
Project surface:
Year:
Area of competence:
ca 545 sq. m (net), 331 of which dedicated to sales
2015-2016
Civil-Commercial
Aim of the project:
The project involves the complete renovation of
the building (5 floors above ground and a
basement) and a completely renovated
distribution and structural system.
By SCL:
Executive Design and direction of all the structural
works. The structure of the building has been
completely redone, creating the new floors and
columns within the existing steel building (“box in
the box”). The demolitions of existing floors and
central pillar occurred after completing the new
structure. The architectural project has also
featured the demolition of the r.c. existing scale
and of the lift and the construction, in a different
location, of both the lift and the new steel
staircase. The project foresees the partial
remaking of the roof, now temporarily supporting
a technical volume, and the remaking of the
façade on Old Bond Street.
- 21 -
VALENTINO: Flagship Store – 39 Old Bond Street, London
- 22 -
VALENTINO: Boutique show room - Rue Saint Honoré, Paris
Client:
Valentino S.p.A.
Project surface:
Almost 1000 m2 overall. In detail: 335 dedicated to
the shop and 662 to showroom and offices.
Year:
Area of competence:
2015-16
Civil-Commercial
Aim of the project:
While keeping the shop active on ground and first
floor, works are meant to convert the second floor
into shopping area, the third floor into offices and
the fourth, fifth and sixth floor into showroom.
By SCL:
Executive Design and Works Management of the
structural works (r.c., steel and masonry).
Most notable activities involve the creation of the
new, indoor, circular staircase between first and
second floor and the considerable openings in the
existing masonry floors from 2 to 6.
All the structural and building renovations were
completed in just four months.
- 23 -
VALENTINO: Boutique Show Room – Rue Saint Honoré
Honoré, Paris
- 24 -
VALENTINO: Flagship store – Piazza di Spagna, Roma
Client:
Valentino S.p.A.
Project surface:
Final overall area: 1583 sq. m (net)
Year:
Area of competence:
2015
Civil-Commercial
Aim of the project:
New Valentino flagship store on ground, first and
second floor of a historic masonry building in
Rome's old city centre.
By SCL:
Executive Design and Works Management of all
structural works (steel and reinforced concrete) by
law 1086. Work completed in four months.
Most notable structural works include:
- 3 monumental stone staircases.
- a major double-height atrium upon demolition
of floors portions and addition of two steel
frames (including a double-height one) in order to
grant full support to upper floors.
- Additional support to existing crawl spaces and
opening of many compartments into bearing wall
alignments.
- 25 -
VALENTINO: Flagship Store – Piazza di Spagna, Roma
- 26 -
VALENTINO: Flagship Store – 5th Avenue, New York
Client:
Valentino S.p.A.
Project surface:
Final overall area: apx 1200 sm. m (net)
Year:
Area of competence:
2014
Civil-Commercial
Aim of the project:
Renovation of the New York City Valentino
flagship store featuring the realisation of a new
monumental staircase at the entrance and a huge
clock (1.2 m diameter) built on the facade.
By SCL:
Executive design and direction of works for the
monumental staircase, which features a double
cantilever walkway on 6.0 m and 3.5 m spans.
The most notable engineering techniques adopted
in this project were meant to find worthy
solutions for:
- Mobility of single steel elements preassembled in Italy.
- Structural criticalities of the project due to the
reduced thickness of available supports for loadbearing elements.
Outside the huge clock's steel structure and its
junction to the facade were inspected through a
stress analysis.
- 27 -
VALENTINO: Flagship Store – 5th Avenue, New York
- 28 -
VALENTINO: Boutique - Via de Tornabuoni, Firenze
Client:
Valentino S.p.a.
Studio David Chipperfield Architects
Project surface:
Year:
Area of competence:
Almost 350 m2 overall.
Work in progress (2016)
Civil-Commercial
Aim of the project:
New shop at ground and first floor of an historical
building dated 1733 located next to the Church of
Santa Trinità.
Most notable structural works include:
- strengthening of all the wooden floor
-strengthening of the main vertical structures
-substitution of the existing strengthening
structure with a new metal portal
-realization of a new steel staircase in order to
substitute the existing one (part of a renewal work
of the 70’s)
-a new elevator steel shaft in order to connect the
ground and first floor
By SCL:
Executive Design and works management of all
the structural works. Analysis and check of the
impact of the intervention on the adjacent
Church of Santa Trinità. Assistance and support to
the client all the way trough (from the bid to the
achievement of all the permits).
- 29 -
VALENTINO: Boutique – Via Montenapoleone, Milano
Client:
Valentino S.p.A.
Project surface:
Final overall area: apx. 900 m (net)
2
Year and area of competence: 2011 Civil-Commercial
Aim of the project:
Expansion and renovation of the men and women
apparel store located, from ground to second
floor, in an historic masonry building in the city
center of Milan.
By SCL:
the structural works (r.c., steel and masonry).
Remarkable parts of the project include:
- reinforcement on existing wood and concretmasonry slab due to a change of use.
- Realisation of a new main steel staircase from
ground to 1st floor and development of
construction details.
- realisation of a new service steel staircase from
basement up to the first floor.
- realisation of steel portals following the
demolition of some bearing walls in order to
create new openings.
The previous renovation, by Antonio Citterio and
Partners, dated 2001-2002.
- 30 -
VALENTINO: Boutique – Via Montenapoleone, Milano
- 31 -
CELINE: Boutique Céline – Avenue Montaigne, Paris
Client:
Céline S.p.A.
Project surface:
Final overall area: 520 sq. m (net)
Year:
Area of competence:
2014
Civil-Commercial
Aim of the project:
Renovation of the store, from the location of the
storage room at floor -1 up to the 1st floor.
Implementation of vertical connection by a new
elevator and 2 new staircases, one of which between ground and first floor- made of
reinforced concrete and performing an helical
shape.
By SCL:
the structural works (r.c., steel and masonry).
Most notable activities involved the creation of
the new, indoor, helical shaped staircase and the
considerable modifications of the structures
elements related to a previous intervention on the
original bearing structures.
All the structural and building renovations were
completed in just four months.
- 32 -
CELINE: Boutique Céline – Avenue Montagne, Paris
- 33 -
DOLCE & GABBANA: Boutique – Corso Venezia 7, Milano
Client:
Dolce & Gabbana S.p.A
Project surface:
BAM Design
2
Final overall area: apx. 900 m (net)
Year:
Area of competence:
2009
Civil-Commercial
Aim of the project:
Renovation of the three levels D&G boutique in the
historical center of Milano.
By SCL:
the structural works. Remarkable parts of the
project include:
- a new elevator shaft made of reinforced concrete
- a new steel staircase, including the development of
the crystal railings' structural details.
- reinforcements of the 1st floor slab due to the
change of use from residential to shopping area.
- remaking of a portion of the 1st floor slab at the
landing of elevator and staircase.
- metal portals employed for the demolition of two
portions of the bearing walls at the 1st floor,
around the building atrium.
- 34 -
DOLCE & GABBANA: Boutique – Corso Venezia, Milano
- 35 -
COventidue S.r.l.: Residential Building, Corso XXII Marzo, Milano
Client:
COventidue S.r.l.
FreyrieFlores Architettura
Betaprogetti
Installation Design:
Project surface:
Year:
Area of competence:
Aim of the project:
2
Final overall area: apx. m 6000
Work in progress (2016)
Civil-Residential
Requalification, seismic and static improving of an existing
building of 5 floor and an attic. New construction of terraces
and bioclimatic greenhouses in the existing courtyards.
To be pointed out:
- the existing and uncompleted strengthening
due to a previous
structural intervention
project started with the old owner.
- the inability to proceed with strengthening structural
intervention on underground and ground level as not
included in the client’s property
- the new self-supporting structure for the landing balcony
in the courtyards
- the new structure for the reconstruction of the roof
By SCL:
Survay of the existing structure and evaluation of the
impact of the new project on the building. Executive Design
and works management of all the structural works
- 36 -
COVentidue S.r.l. , Milano
- 37 -
PALAZZO APORTI: via Ferrante Aporti, Milano
Client:
Project surface:
Year:
Area of competence:
Business Port
Antonio Citterio & Partners
Aim of the project:
Building requalification of the Ferrante Aporti
complex. The renovation included the realization of
new volumes created inside the original building as
well as the recovery of the attics in the overhead
parts of the construction, for a total of approximately
2
7.750 m .
By SCL:
Executive Design and Works Management of
structural works. Remarkable parts include:
- General reinforcement of foundations and
elevated r.c. structures; study of new static
schemes and systematic integration of existing
RC structures with the new materials.
- Strengthening of existing elements.
- Organization of the complex sequences of
demolition, reinforcement and new construction.
- Emptying of one of the existing buildings while
preserving the facades and creating new slabs.
- Building of a new car ramp from second
underground level to ground floor.
- Remaking of 6 elevator shafts and stairs.
- Rebuilding of the roofing of the overhead parts of
two buildings.
- Development of 15x8 m sized lightwell in existing slab
- Realization of 18 m single span steel beams.
-
Final overall area: 43.390 m
2
2007
Civil-Commercial
- 38 -
Palazzo Aporti: via Ferrante Aporti, Milano
- 39 -
Palazzo Aporti: via Ferrante Aporti, Milano
- 40 -
DEUTSCHE BANK: headquarters, Napoli
Client:
Deutsche Bank
Structure Design:
M.S.C.
Installation design:
Ingg. Fabio Fumagalli e Corrado Nava
Project surface:
Year:
Area of competence:
Final overall area: 3.500 m2
2010-2015
Civil-Commercial
Aim of the project:
Complete requalification of the building, new
distribution of internal spaces, seismic improving
and total renewal of all installation.
By SCL:
Feasibility. Architectural design, executive design
(architectural, installation and fire protection) and
general works management. Final installation
testing.
- 41 -
Deutsche Bank, headquarters: Napoli
- 42 -
BUILDING via Durini, Milano
Client:
Durini 1 S.r.l.
Project surface:
Year:
Area of competence:
Aim of the project:
Antonio Citterio & Partners
Net final overall surface: sq. m 2450
By SCL:
Executive Design and Works Management of all the
structural works. Remarkable works
include
reinforcement of existing floors in brick and concrete
structure with insertion of steel beams to ensure live
loads of 3 to 4 kN/sq.m
- full height reinforcement of the most stressed r. c.
pillars
- demolition of portions of slabs for new staircases and
new lift shafts and hoists
- the construction, at basement level, of a new
reinforced concrete floor in order to sustain two
central pillars of the building
- the realization, for two underground levels and for the
60% of the building area, of the r.c. "envelope" for the
underground parking
- careful
and
detailed
study
of
the
construction/excavation sequence, due to the need to
support two central pillars of the building at the level 1, in order to proceed with the construction of the car
park at the levels -2 and -3
2006
Civil-Commercial
Renovation of the seven floors building and construction
of two new underground levels underneath the existing
floors.
- 43 -
UNDERGROUND PARKING: Via Turati, Milano
Client:
Turati Immobiliare
Project surface:
apx total 1300 m2
Year:
2010
Area of competence:
Civil
Aim of the project:
Bring to an end the construction of an automated
underground parking of 6 floor with a non regular
plan shape (approximately 16 x 13,5 m) and the
lowest level at - a 22,25 m.
By SCL:
Legal expertise.
Executive Design and Works Management of all
the structural works needed to complete the work.
The legal expertise gave the opportunity to
identify the week aspects of previous project and
realization mainly related to the fragile solutions
adopted in order to face the flood due to the
ground water table rise. Considering the above
the intervention of SCL focused on the dewatering
of the site in order to proceed with the structure
construction, the reinforcing of the parts already
built and the waterproofing system.
- 44 -
PALAZZO LEONE,, Corso Vittorio Emanuele II 159, L’Aquila
Client:
Condominio Leone
Project surface:
apx total 1500 sq. m (apx. 300 for each floor).
Year:
Area of competence:
2009
Civil-Residential
Aim of the project:
Renovation and seismic improving of a five floor,
including basement, building in the center of
L’Aquila. Mixed
ixed structure
structure: concrete and briks.
Direction of work, construction
onstruction and safety
Managing.
By SCL:
Technical expertise and analysis in order to verify
the structure and the damage after the
earthquake of April 6th 2009. Result: the building
has being declared not habitable (seismic E level).
Strengthening
project
finalized
to
the
rehabilitation of the building as residential
location. Renovation of all the apartments.
- 45 -
HOSPITAL OF VIMERCATE, Milano
Client:
Vimercate Salute
Infrastrutture Lombarde SpA
Project Surface:
About 115.000 sq. m
Year:
Area of competence:
2006
Civil-Public
Aim of the project:
The project featured a new hospital characterized
by different building units dedicated to various
function: reception and welcome area, central
area, forepart, recovering area, technological
department and parking.
By SCL:
Direction and approval of the structural work
(concrete and steel construction) according to the
requirements of the Italian statutory regulations
law 1086.
Cooperation with the general direction of the work
both architectural and plant engineering.
- 46 -
AEROPORTI MILANO – Terminal 2 Malpensa
Cliente:
SEA
Year:
2011 Analysis of seismic vulnerability
2013 Structural strengthening and seismic
improving
Area of competence:
Civile-Public
By SCL
Technical tests in order to verify the seismic
safety level. Executive project of the static
strengthening and the seismic improvement of
the buildings and the infrastructures of the
aerostation Terminal 2 Milano Malpensa.
Terminal 2 has a complex and articulated
organizations composed by 6 buildings of 2 or 3
floors and an underground level. The
heterogeneous substructures dating from
different periods and the need to reinforce the
structure over ground by keeping their flexibility
represented a great task during both the project
phase and the realization.
- 47 -
Industrial structures and Stress analysis
- 48 -
Arvedi Steelworks in Cremona – Fumes treatment
Client:
STFE – Studio Feneri Ecologia
Year:
Area of competence:
2009
Industrial – Iron and steel
Aim of the project:
Exhaust fumes treatment system from
CONSTEEL furnace of the new Arvedi
Steelworks in Cremona
Process design:
Constructions:
STFE
Comeca S.p.A.
By SCL:
Design of the structures and equipment of
the plant:
• Ducts of the primary and secondary
fumes pipelines
• Pre-separation groups (cyclons)
• Quencher
• Fumes filtration (fabric filter)
• Stack
• Support structures
• Secondary service pipelines
- 49 -
Valsabbia Steelworks - Odolo (BS) – Fumes treatment
Client:
COMECA S.p.A.
Year:
Area of competence:
2010
Industrial – Iron and steel
Aim of the project:
Revamping and improvement of fume treatment
plant from the electric arc furnace.
New extractor hood supported by the reinforced
concrete building of the steelworks of the 70s,
connected to a new
ew roof of the raw steel deposit,
with earthquake resistance function.
Pre-treatment
treatment equipment (axial cyclone) and
fumes ducts connected to existing fabric filters.
Ducts, dampers and supports.
Work executed in 40 days during the summer
production stopping including dismantling of the
hood and roofs, reinforcement of the existing
structures, assembly and installation of the new
structures and equipment.
Process design and
construction:
By SCL:
Comeca S.p.A.
Structural desing,
Project of the erection sequence of the extractor
hood, that was executed with a 800t movable
crane handling the pre-assembled
assembled modules of the
hood up to 50t complete of the smoke
smoke-proof
cladding.
- 50 -
Exhaust fumes treatment scrubbers
Client:
Hamon Research Cottrell - HRC
Year:
Area of competence:
2008-2010
Industrial - Equipment
Aim of the project:
Structural design of scrubbers for the fumes
treatment manly for the fertilizers production
plants; circular and rectangular sections
Main projects:
Abu Dabi (2008): 2 circular section scrubbers
QAFCO V - Qatar (2008): 2 rectangular section
scrubbers
ARZEW (2009): 2 rectangular section scrubbers
SMUR (2010): 2 rectangular section scrubbers
TAF-Tatarstan (2011) : 2 circular section scrubbers
Process design and
construction:
By SCL:
HRC
Structural design for manufacturing of the
equipment to ASME, ASCE-7 Norms and local
regulations of the installation Countries.
- 51 -
IREN Energia – Torino Nord – Air Cooling Condenser
Client:
Year:
Area of competence:
2011-2012
Industrial - Power
Aim of the project:
Construction of the Air Cooling condenser in the
new Power generation Plant of Torino Nord,
including a combined cycle co-generation plant
with a total capacity of approx. 400 MW power
and 220 MW thermal, exclusively from with
natural gas
Process design and
construction:
By SCL:
Design and works direction of the steel structures
of the ACC and of the ducts to Law 1086/71 (Italian
building regulations)
- 52 -
Mini hydro-elettric power plant – Comuni di Gera
Lario, Trezzone e Montemezzo (CO)
Client:
Energia Pura Gera Lario SRL
Year:
Area of competence:
2015
Industrial - Power
Aim of the project:
Construction of a new mini hydro-elettric
power plant on the Torrent San Vincenzo in the
territory of Como’s province.
The work is part of the “Piano di Riassetto
Idrogeologico – 1° Stralcio” of the Provence
Authority of Como.
By SCL:
Static testing to Law 1086/71 (Italian building
regulations) of the structures.
- 53 -
ILVA – Taranto
Client:
ILVA – Taranto
Year:
Area of competence:
1994
Industrial
Aim of the project:
Structural design of various civil works for the
“Mater Gratiae” dump (2nd category type B) in the
territory of Taranto.
Basins, roads, lighting towers, foundations etc.
By SCL:
Structural design for construction.
In cooperation with SGI - Studio Geotecnico
Italiano
- 54 -
PORTOVESME: Cadmium recovery Plant
Client:
Portovesme S.r.l.
Year:
Area of competence:
2001
Industrial
Aim of the project:
New structures for the improvement of the
cadmium recovery plant.
By SCL:
Structural design for construction and work
direction of the civil works, steel structures,
equipment and tanks for the revamping of the
cadmium recovery plant.
Work commissioned by LMI S.p.a., Lazzari
Montaggi Industriali, Treviolo, Bergamo.
- 55 -
PORTOVESME: Progetto di Ampliamento dello stabilimento
Client:
Portovesme S.r.l.
Year:
Area of competence:
2005
Industrial - Production
Aim of the project:
Expansion of the Electrolytic Zinc Production Plant
By SCL:
Design for construction of the New Plant including
services and utilities (electric, mechanic, water
treatment, silos and internal service roads).
- 56 -
ALSTOM: Endesa Generation Litoral 2 Power Plant
Client:
Alstom Italia / ENEL
Year:
Area of competence:
2014-in progress
Industrial - Power
Aim of the project:
Revamping absorber
By SCL:
In the context of the improvement project of the
Litoral Power Station di Endesa Educa in Carbonera
- Almeria (Spain), Alstom Italia has commissioned
to SCL the structural checks of the existing
absorber to assess the stability with new
technological systems considering new working
conditions.
Similar assessments and design have been
executed for ALSTOM in the EDF power plants of
Le Havre and Cordemais in France.
- 57 -
SPIG: Hitachi Zosen - Air cooling condenser
Client:
SPIG
Year:
Area of competence:
2014-2015
Industrial- Power
Aim of the project:
New ACC installed in the SEVERNSIDE Energy
Recover Centre (UK)
By SCL:
In the ambit of the project of the new energy
recovery 34 MW power plant SCL has carried out
the plan for construction of the ACC structures and
the exhaust steam ducts.
- 58 -
Hellenic Petroleum: Nuovo venturi scrubber
Client:
Turbosonic inc. Italian Branch
Year:
Area of competence:
2010-2011
Industrial - Petrochemical
Aim of the project:
New venture scrubber for HELP (Hellenic
Petroleum)
By SCL:
Structural design of the equipment to ASME
Standard (pressure vessel)
- 59 -
ASTALDI Canada: Muskrat Falls Project
Client:
ASTALDI Spa (Canadian branch)
Year:
Area of competence:
2015
Water and Energy
Generation Facility
Aim of the project:
Dismantling of I.C.S Temporary Building
By SCL:
Preliminary study on global stability of I.C.S.
steel structure, used in the construction of
the Muskrat Falls hydroelectric generation
facility (Labrador region), according to
dismantling sequence of its roof maintrusses.
–
Hydroelectric
- 60 -
EXPO 2015 – Coperture metalliche cluster BMD-ADZ-CRT-ISL
Client:
SERING S.r.L. – Rubner S.p.A.
Pre-Metal S.p.A.
Year:
Area of competence:
2013-14
Civil
Aim of the project:
Structural design of roofing of the four clusters
Biomediterraneo, Zone Aride, Cereali e Tuberi and
Isole, commissioned to Rubner.
Construction:
Pre-Metal S.p.A.
By SCL:
Structural design of the steel roofing of the outside
areas of the pavilions for SERING S.r.L.
Production of the construction documents for the
steel manufacturer Pre-Metal S.r.L.
Assistance for testing
- 61 -
Logistic
- 62 -
SCL has been operating, for more than twenty years, in the research and design of the structures and systems in the logistics industry.
The firm, as technical coordinator of ACAI-CISI (Associazione Costruttori Acciaio Italiani and Costruttori Italiani Scaffalature Industriali),
represented the Italian constructors of shelving system in the European Racking Federation (ERF), in the FEM-Section X (Racking and Shelving) and
in the CEN TC/344 “Steel Static Storage Systems”, collaborating at the definition of all FEM’s documents and at the definitions of the norms EN.
SCL Ingegneria Strutturale is also a partner of UNI ( Ente Italiano di Normazione) and a member of GdL UNI/CT021/SC03/GL01 for shelving
systems. In 2014 was created, within the organization, SCL-Log a specific section, which leads all the activities in the logistics field.
Among the clients of SCL-Log: Procter & Gamble, Amazon and Ikea.
Push back rack in low temperature cell and Shuttle racking system
More info at www.scl-log.it
- 63 -
Pushover Analysis
- 64 -
Rack-clad storage system warehouse
Test on racking components
- 65 -
Adjustable pallet racks. Lagos, Nigeria
- 66 -
Numeric analysis shuttle rack
Whisky storage rack (UK)
- 67 -
Work in progress:
Installation of racking system in
a warehouse of a Distribution Centre.
Guangzhou, PRC
- 68 -
Retail shop
- 69 -
Inspection, test and expertise
- 70 -
PORTA VOLTA Fondazione Feltrinelli, Milano
Client:
Finaval s.p.a.
Herzog & de Meuron Basel Ldt
Structural Design:
SD Partners
Installation Design:
Polistudio A.E.S.
Project surface:
Year:
Area of competence:
Superficie netta complessiva finale ca. mq 15.000
Works in progress (2013-2016)
Civil –Service
Aim of the project:
As part of the redefinition of the area the
intervention consists in the construction of two
multilevel office building (with 2 underground
floor) and a generous green area. The position
of the buildings, characterized by the visible r.c.
structure of the façade, emphasize the historical
Porta Volta gate houses.
By SCL:
In progress and final structural testing by the law
1068/1971 e s. m. i.
- 71 -
Porta Volta Fondazione Feltrinelli: Milano
- 72 -
POLIRONE MONASTIC BUILDING COMPLEX
San Benedetto Po (MN)
Municipality of San Benedetto Po
Client:
Structural Design:
Work Management:
Dott. Ing. Stefano De Vito
Dott. Ing. Nicola Berlucchi
Amount structural work:
Year:
€ 1.140.000
2015 - 2016
Aim of the project:
Local interventions and general seismic
improving in order to restore the damages after
the earthquake of May 2012.
By SCL:
Final structural testing by the law 1068/1971.
The main area of testing where localized in San
Simeone cloister and in the access area of
Secolari cloister.
- 73 -
Polirone Monastic building complex. San Benedetto Po (MN)
- 74 -
VILLA REALE, Monza
Client:
Structural Design and
Work Management:
Lazzari
Infrastrutture Lombarde
Dott. Arch Laura F.
Structural Design:
Dott. Ing. Giorgio Croci
Amount structural work:
Year:
Area of competence:
€ 21.409.682
2014
Civil-Public
Aim of the project:
Giving back to Villa Reale the role of “cultural pole and luxury location” was the main goal of the intervention. was – an - The
general riqualification of this historical building under the superintendency of cultural heritage focused on the central area, on
part of the two side wings and on the court yard. The main structural elements have been reinforced, an upgrading of the general
installations has been done as well as a very fine restorations of the finishing and art masterpieces.
By SCL:
Technical and administrative final inspections, approval of the structural work according to the requirements of the Italian
statutory regulations by the law 1086
- 75 -
NEW HOSPITAL BUILDING OF NIGUARDA, Milano
Client:
Azienda Ospedaliera Nuovo Ospedale di Niguarda
Year:
Area of competence:
2007-2013
Civil-Public works
Aim of the project:
Renovation and complete redesign of the Hospital
building of “Niguarda Ca’ Granda”. New
constructions and renovation of the existing
pavilions bounded to the Superintendence of
Cultural
Heritage.
Construction
of
the
interconnection
network
of
underground
passages.
By SCL:
Technical and administrative final inspections,
approval of the structural work according to the
requirements of the Italian statutory regulations
law 1086.
- 76 -
“In the ancient times of Arts Builders refinished with great care even the
slightest, invisible part because the Goods see everywhere”
A.E. Van Voght
- 77 -

Logistic - SCL - Ingegneria strutturale

Transcript

Documenti analoghi

19-21 May 2014 Hotel Palais des Roses Agadir, Morocco Keynote

on the dynamics of suspension bridge decks with wind

Scarica - Corsi di Laurea Ingegneria Meccanica

experimental study on the effect of reynolds number in a

medical rhinoplasty: practical course on filler and

flyer - Università degli studi di Pavia

Special Session SIG E3 Program - Transport Economic Regulation

advise

Technical Datasheet

English version - Stefano Pellegrini