TLED 1B AS
Transcript
TLED 1B AS
Technical Dept. TLED 1B AS Rev. 03-12 Scheda prodotto - Product Sheet DIVISIONE TECNICA TLED 1B AS CARATTERISTICHE PRINCIPALI - Main features Applicazioni Gruppo ottico Inclinazione apparecchio Classe di isolamento Protezione agli urti Grado di protezione Montaggio Cablaggio Dimensioni Norme di riferimento Applications Optic Tilt angle Insulation class Impact protection Protection degree Fixing Gear tray Dimensions Main reference standards Tunnel entry, exit lighting AS: Asymmetrical optic for reinforcement lighting of tunnel Color temperature: 6000K (others upon request) CRI typical: 70(6000K) Photobiological safety class EXEMPT GROUP LED source efficiency: 112lm/W @ 700mA According to lighting calculation. II IK08 IP66 total IP65 (RS-485) Mounting system for cable channel with manual double closing-hook and safety lock. GxF: Upon request. (standard 100x75mm) Separated, non removable. See table n.1 EN 60598-1, EN 60598-2-3, EN 62471, EN 55015, EN 61547, EN 61000-3-2, EN 61000-3-3 CARATTERISTICHE ELETTRICHE - Electric Features 220÷240V 50/60Hz(others upon request) Alimentazione Rated voltage See table n.2 Corrente LED LED Current >0,9 (full load) Fattore di potenza Power factor Sistema di controllo Connessione di rete Connettore comunicazione (solo RS-485) Cavo di comunicazione (solo RS-485) Vita gruppo ottico (Ta=25°C) Attacco Disipatore Corpo Ottica Schermo Pressacavo Ganci di sicurezza vetro Control system Wiring system F: Fixed, non dimmable. PLM: Single point communication module. RS-485: Single point serial communication module. Branch wiring Cable FG7OM1 0.6/1kV 3x1.5mmq L.1.5mt Plug IEC309 2P+T 16A IP67 Other types of plugs and cables are available upon request. Communication connector (only RS-485) Double panel connector IP65 (Communication cable excluded) Communication cable RS-485 3xAWG24 twistated with shield, RS-485 (120Ohm), LSZH, 0,6/1kV , Length upon request. ≥50.000hr B20L80 (including critical failures) ≥70.000hr L80, TM-21 MATERIALI - Materials Fixing Stainless steel AISI 304 (AISI 316L upon request) Heatsink Extruded, anodized aluminium Body Stainless steel AISI304 Optic High efficiency metalized aluminium Screen Flat tempered glass 5mm Cable clamp Plastic M20x1.5 - IP68 Optical unit life (Ta=25°C) Screen safety hooks Stainless steel AISI304 AEC Illuminazione S.r.l. www.aecilluminazione.it - [email protected] All the published photometrical data has been obtained according to EN 13032-1 e IES LM 79-08 TLED 1B AS Technical Dept. Rev. 03-12 Dimensioni - size Table n.1 204 136 F 630x340x94mm (AxBxC) PLM RS-485 437x340x94mm (AxBxC) 15Kg 13Kg 68 34 274x340x94mm 274x216x94mm (AxBxC) (AxBxC) 9Kg 5Kg Esternal P.S. Scheda prodotto - Product Sheet DIVISIONE TECNICA Ta(°C) 50 40 25 15 5 0 Tk 3200 3950 6000 Moltiplicatore Multiplier 0.95 0.97 1.00 1.02 1.03 1.04 Moltiplicatore Multiplier 0.81 0.95 1 Coefficiente di moltiplicazione per ricavare il flusso luminoso in funzione di Ta e Tk. Multiplier to obtain the luminous flux as a function of Ta and Tk. Performance Table n.2 Flusso iniziale apparecchio Rated luminaire initial flux (Ta=25°C, 6000K ) Rated Power ( Ta=25°C, Vin=230Vac) Corrente Led - Led current 700mA (Other upon request) #LED 204 LED 136 LED 68 LED 34 LED Potenza nominale 36250lm 24400lm 12250lm 6500lm 450W 300W 150W 75W Valori nominali – tolleranza ±5% Nominal values - tolerance ± 5% AEC Illuminazione S.r.l. www.aecilluminazione.it - [email protected] To encourage a continuous updating of its products, AEC reserves the right to make changes without notice.