resine e materiali filtranti
Transcript
resine e materiali filtranti
RESINE E MATERIALI FILTRANTI Resine a scambio ionico RESINA CATIONICA FORTE PER ADDOLCIMENTO Resina cationica per addolcimento food grade. Struttura polimerica gelulare stirolica. Rimuove durezza da calcio e magnesio scambiandola con ioni sodio. Rigenerabile con cloruro di sodio. La capacità di scambio dipende largamente dalla quantità di sale utilizzato durante la rigenerazione. Resine equivalenti: - Dowex HCRS/S - Purolite C100E; - Rhom and Haas: SR1L Na - Bayer Levatit S100LF Codice Conf./l RE-CS 25 Euro/l Chiedere offerta per i pallets completi RESINA CATIONICA FORTE PER DEMINERALIZZAZIONE Resina cationica forte per demineralizzazione, dealcalizzazione ed addolcimento. Struttura polimerica gelulare stirolica, alto coefficiente di uniformità Resine equivalenti: - Dowex Marathon C - Purolite C100H; - Rhom and Haas: IR120 - Bayer: Levatit S100H Monoplus Codice RE-CD 126 Conf./l 25 Euro/l SCHEDA TECNICA Polymer Matrix Structure Physical Form and Appearance Whole Bead Count Ionic Form ,as shipped Shipping Weight (approx.) Particle Size Range Moisture Retention, Na+ form Swelling Na+® H+ Ca2+®Na+ Total Exchange Capacity, Na+ form, wet, volumetric Operating Temperature, Na+ Form pH Range, Stability Minimum Bed Depth Backwash Rate Regenerant Flow Rate Regenerant Contact Time Regenerant Level Service Flow Rate Styrene Crosslinked with DVB Clear spherical beads 95% min. Na 810 g/l (51 lb/ft3) +1.2 mm <5%, -0.3 mm <1% 45-50% 10% max. 5% max. 1.90 eq/l min. 150ºC (300ºF) max. 0 - 14 0.6m 25 to 50% Bed Expansion 4 to 12 BV/h (0.5 to 1.5gpm/cu/ft.) At least 30 minutes 112 -300g/lt 10-25m/h (2 to 10 gpm/cu/ft.) SCHEDA TECNICA Polymer Matrix Structure Physical Form and Appearance Whole Bead Count Ionic Form, as shipped Total Exchange Capacity, Na+ form, wet, volumetric Moisture Retention, Na+ form Particle Size Range Uniformity Coefficient Swelling Na+® H+ PH Range, Stability Minimum Bed Depth Backwash Rate Regenerant Concentration Hydrogen Cycle Regenerant Flow Rate Regenerant Contact Time Regenerant Level Service Flow Rate Styrene Crosslinked with DVB Clear spherical beads 95% min. Na 2.0 eq/l min. 43-48% 0.50mm-0.71mm>95% 1.15 10% max. 0 - 14 0.6m(24inches) 25 to 50% Bed Expansion 6% HCl or 4 to 8%H2SO4 4 to 12 BV/h At least 30 minutes 112 -300g/L 10-25m/h Resine a scambio ionico RESINA ANIONICA PER DEMINERALIZZAZIONE Resina anionica forte gelulare Tipo 1, ad alto coefficiente di uniformità. Idonea per impianti di demineralizzazione anche a letto misto. Resine equivalenti: - Dowex Marathon A, SBR-P; - Purolite A 400; - Rhom and Haas: IRA 420; - Bayer: Levatit M 500 Monoplus Codice Conf./l RE-AD 25 Euro/l RESINA ANIONICA SELETTIVA PER NITRATI Resina anionica forte macroporosa idonea per la rimozione selettiva dei nitrati anche in presenza di alte concentrazioni di solfati. Di conseguenza si ha una maggiore purezza dell'acqua trattata ed una elevata resa ciclica. Resine equivalenti: - Purolite A 520E; - Rhom and Haas: IP555. Codice Conf./l RE-AN 25 Euro/l RESINA A LETTO MISTO Resine a letto misto rigenerabili pronte all'uso. Idonee per la produzione di acqua ultra pura. Resine equivalenti: - Dowex MB50; - Purolite MB46, MB47; - Rhom and Haas: MB20; - Bayer: Levatit SM94 Codice Conf./l RE-MB 25 Euro/l SCHEDA TECNICA Styrene Crosslinked with DVB Clear spherical beads 1.3 eq/l min. 48-58% 0.50mm-0.71mm>95% 1.15 20-30% 0 - 14 0.6m(24inches) 50 to 75% Bed Expansion 2 -6% 2 to 8 BV/h (0.25 to 1.0gpm/cu/ft.) At least 40 minutes 112 -300g/L (4 to 10 pounds/ cu/ft.) 10-25m/h (2 to 10 gpm/cu/ft.) Polymer Matrix Structure Physical Form and Appearance Total Exchange Capacity, CL- form, wet, volum. Moisture Retention, CL- form Particle Size Range Uniformity Coefficient Swelling CL-® OHPH Range, Stability Minimum Bed Depth Backwash Rate Regenerant Concentration Regenerant Flow Rate Regenerant Contact Time Regenerant Level Service Flow Rate SCHEDA TECNICA Milky white, Clear spherical beads CL 0,8 3.00 50-60 0.65-0.75 1.05-1.10 4,5 - 8,5 60°C Physical Form and Appearance Ionic Form ,as shipped Volume Exchange Capacity (mmol/ml) Total Exchange Capacity (mmol/g) Water Retention (%) Shipping Weight (g/ml) True (Wet) Density (g/ml) PH Range, Stability Operating temperature (max) SCHEDA TECNICA Polymer Matrix Structure Functional Group Volume ratio Total Exchange Capacity, min. eq/l Water Retention Capacity % Particle Size Distribution >1.25 mm max.% <0.40 mm, max % Whole Bead Count, min. % Moisture Content as shipped, max PH Range, Stability Shipping weight (approx.) Ionic conversion, min. % OH - F o r m H + Form Gel PolyStyrene Crosslinked with DVB Sulfonic acid Quaternary Amine 0.9 part 1.1 parts 1,80 1,25 45-50 53-58 5 2 95 5 2 95 65% 0-14 700-780 g/l 90 99 127