volkswagen touareg
Transcript
volkswagen touareg
VOLKSWAGEN TOUAREG Item Code Codice Articolo Réference Article GB STAINLESS STEEL OVAL GRAND PEDANA/DESIGN SIDE PROTECTION GPO/150/IX DSP/150/IX ITA GRAND PEDANA OVALE/PROTEZIONE LATERALE DESIGN IN ACCIAIO INOX FR GRAND PEDANA OVALE/PROTECTION LATERALE DESIGN EN ACCIER INOX VOLKSWAGEN TOUAREG Part List Lista della bulloneria Liste des piéces A T B C E I 8X20 I GPO/150/ P1-DX L GPO/150/ P1-SX x 8 B Ø 8 x 1 x 1 x 16 C Ø 8 M x 2 x 16 D M 8 E x 16 TE 8X25 with welded rod con tondino saldato avec fer rond saudé N O TE 12X40 with welded rod and bush con tondino e boccola saldati avec fer rond et douille saudés x 2 G H M 12 x 2 Ø 12 x 2 GPO/150ADX x 1 GPO/150ASX x 1 x4 F GP/150/P3 P GP/150A-1 x 2 Q TE 8X30 R M6 x 2 x 2 GB FITTING INSTRUCTIONS FRONT SIDE 1. Insert E (pictures 1-2) 2. In order to strengthen the Grand Pedana supplied brackets use the P brackets that can be fitted on the N and O brackets using Q,B,C and D. The brackets shall be fixed to the bodywork by drilling a Ø 9 hole in correspondence of the hole located on P bracket as shown in pictures 3 and 4. 3. Insert R in the hole just drilled. P.S. For a better fitting the P brackets has already been welded to the N,O brackets. REAR SIDE ITA FR ISTRUZIONI DI MONTAGGIO PARTE ANTERIORE 1. Inserire E (foto 1-2) 2. Per rinforzare ulteriormente lo staffaggio in dotazione vengono fornite le staffe P che possono essere montate sulle staffe N ed O utilizzandoQ,B,C e D. Queste staffe vanno fissate al telaio praticando un foro Ø 9 in corrispondenza del foro presente sulla staffa P come indicato in foto 3,4. 3. Inserire R nel foro appena effettuato. INSTRUCTIONS DE MONTAGE PARTIE ANTERIEURE N.B. Per un miglior montaggio le staffe P sono state saldate alle staffe N,O. 1. Insérer E (photos 1-2) 2. Pour renforcer ulterieurement les pattes de fixation fournies utiliser les pattes de fixation P qui puivent étre montés sûr les pattes N et O en utilisant Q,B,C et D. Fixer les pattes au châssis en perceant un trou Ø 9 en correspondence du trou qui se trouve sûr la patte P comme indiqué dans les photos 3 et 4. 3. Insérer R dans le trou percé. P.S. Pour un meilleur montage les pattes de fixation P ont étés déjà saudées à les pattes N et O. PARTE POSTERIORE PARTE POSTERIEURE 1. Unscrew the bolts that fix the plastic protection 1. Svitare i bulloni protezione in plastica 2. Remove the cover inside the plastic protection 2. Sfilare il coperchio protezione in plastica 3. Insert the M brackets 3. Inserire le staffe M 3. Insérer les étriers M 4. Insert F (picture 5) 4. Inserire F (foto 5). 4. Insérer F (photo 5) 5. Fix I and L on F and M as shown in picture 6 using B,C,D for M and G,H for F. 6. Reassemble the plastic protections without cover che fissano inserito la 1. Dèvisser les boulons qui fixent la protéction en plastique nella 2. Enlever le couvercle inséré dans la protéction en plastique 5. Fissare I e L su F e M come indicato in foto 6 utilizzando B,C,D per quanto riguarda M e G e H per quanto riguarda F. 5. Fixer I et L sûr F et M comme indiqué dans la photo 6 en utilisant B,C,D pour M et G,H pour F. 6. Rimontare coperchio. 6. Reassembler couvercle. le plastiche senza les plastiques sans 2 1 5 4 Date Data Date 15/03/06 Item Code Cod.Articolo Réf. Article GPO/150/IX DSP/150/IX Document checked and approved by Documento controllato ed approvato da Document controlé et approuvé par Vehicle model Modello Veicolo Modèle de Voiture VOLKSWAGEN TOUAREG Claudio Gallo 3 3 6