plaster_Lexan F2000_F6000
Transcript
plaster_Lexan F2000_F6000
Speciality Film & Sheet 2 Mercati di Riferimento • Aviazione • Ferrovie • Quadri Elettrici, Apparecchi Medicali • Veicoli Speciali • Vassoi movimentazione (Auto / Industria) • Lexan* Policarbonato • Ultem* Polieterimmide • Autoestinguenza 3 Opaque Overview 4 Product Overview riciclato Non FR Lexan* DSP155 Non FR Gepax* 7000 UV Coex Gepax* 8000 Coprente Virgin Gepax* 9020 EXL Coex Lexan* F6000 Gepax* 7200 Start FR Trasparente FR UV Coex Gepax* 8200 Elevata resistenza alla Temperatura/chimica Ultem™R16SG00 Ultem™ 1668A/L Lexan* F2000 Lexan* 9600 5 Applicazioni Gepax Gepax* 7200 Gepax* 3000 Gepax* 8000 DSP 155 Gepax* 7000/8000 series 6 Applicazioni Gepax Gepax* 7006 DSP 155 Gepax* 8000 Gepax* 7006 Gepax* 8006 7 Lexan F6000 Excellent Product For The Aviation Industry 8 Lexan EXL Value proposition Description • Lexan* Sheets based in on EXL co-polymer. With EXL resin it is possible to make both transparent and opaque materials • Impact Resistance: Ductile at -60 [DegC] - Ductile after accelerated weathering • Improved chemical resistance • Clean and Safe Burning behavior - Eco-compliant: V0 at 1.5 [mm] - Oxygen Index: 35 - Pass 1[mm] Glow wire at 960 [DegC] Technology • Lexan* EXL is a proprietary GEAM resin technology. • ECO-compliant flame retardant technology • Possible to make FDA approved materials Extreme Low Temperature Impact 9 Ultem 1668A • Opaque sheet based on Ultem* polyetherimide resin with unsurpassed flame retardancy. • Impact Resistance • High chemical resistance • High Flammability Resistance - Low Toxicity UL V0 at 1.6 [mm] Pass FR 25.583 and ABD0031 Pass OSU 6565 Heat Release • Pass OSU 6565 Heat Release Technology Excellent Stain Resistance Black Coffee / Tea / Milk / Hot Chocolade Catsup / Ball Point / Neoprene Heel Scuff Makers can be easily removed with water or standard mild cleaners Improvement Of Production Yields 10 Ultem * R16SG29 Description Value proposition: • An opaque in-colored sheet based on Ultem* Poly-etherimide resin suitable for applications in the Railway industry • Impact Resistance • Chemical Reistance • High Flame Resistance - Low Toxicity - UL V0-1.6 [mm] - DIN5510 Part 2: S4/SR2/ST2 - NF P 92-501/5: M1 / F1 - BS476 Part 6&7: Class 1Y • Impact Resistance Technology: • Extremely good flame resistance • Good Anti-graffiti behavior Meets Demanding Railway Requirments 11 Ultem 1668L Description Value proposition • An in-colored opaque sheet based on Ultem* Polyetherimide resin specifically targeted towards First-class and Business class aircraft seating. The key benefit of the materials is the low gloss surface after forming • Low Gloss Surface • High Stiffness (3000N/mm2) Thinner Parts • Impact Resistance • Pass Flame / Smoke / Toxicity & Heat Release • Low Weight, density: 1.3 ( PPSU: 1.4, PVC/Acrylic: 1.48) Gas Component Excellent performance versus FAR and Airbus Toxicity tests PPM limit ULTEM 1668L Hydrogen fluoride (HF) 100 3 Hydrogen chloride (HCl) 150 <1 Hydrogen cyanide (HCN) 150 3 Sulphur dioxide (SO2) 100 <1 Nitrous gases (NO/NO2 ) 100 4 3,500 <10 Carbon monoxide (CO) Hydrogen sulphide (H2S) Safe And Aesthetically Appealing 100 NR 12 Opaque 13 Gepax* 90211N EXL layer texture 11N Recycle Core –black: 3 – 6 mm EXL Layer texture sandblast • EXL co-ex on both sides to provide: - chemical resistance - Easier Cleaning - Easier to Form • Available with 11N top texture, Gauges 4/5/6 [mm] • Typical Applications: Materials Handling / Specialty Vehicle Cladding Ready For Sale Now 14 H6000 • PC/ABS High stiffness / Ductile Platform • ECO FR, Better Fire Ratings than F6000 • 50% higher Modulus > 3000 Mpa • 10-20% Lower Gloss • Lower temperatures @ forming etc • Avoidance of pre-drying under evaluation • Slightly improved chemical resistance 15 SABIC Innovative Plastics Global Disclaimer I MATERIALI, PRODOTTI E SERVIZI DELLA SABIC INNOVATIVE PLASTICS HOLDING BV, DELLE SUE CONTROLLATE E AFFILIATE (“VENDITORE”), VENGONO VENDUTI SUBORDINATAMENTE ALLE CONDIZIONI STANDARD DI VENDITA, CHE SI POSSONO TROVARE NEL SITO http://www.sabicip.com, E SONO DISPONIBILI A RICHIESTA. SEBBENE QUALSIASI INFORMAZIONE, RACCOMANDAZIONE O SUGGERIMENTO QUI CONTENUTO SIA RIPORTATO IN BUONA FEDE, IL VENDITORE NON FORNISCE ALCUNA GARANZIA NÉ’ ASSICURAZIONE, SIA ESSA ESPLICITA O IMPLICITA, IN MERITO A (i) IL RAGGIUNGIMENTO DEI RISULTATI QUI DESCRITTI NELLE CONDIZIONI FINALI D’USO, O L’EFFICACIA O SICUREZZA DI QUALSIASI MODELLO CHE INTEGRI I PRODOTTI, MATERIALI, SERVIZI, RACCOMANDAZIONI O SUGGERIMENTI DEL VENDITORE. AD ECCEZIONE DI QUANTO PREVISTO NELLE CONDIZIONI STANDARD DI VENDITA DEL VENDITORE, IN NESSUN CASO IL VENDITORE POTRA’ ESSERE RITENUTO RESPONSABILE DI QUALSIVOGLIA PERDITA DERIVANTE DA QUALUNQUE UTILIZZO DEI SUOI MATERIALI, PRODOTTI O SERVIZI, COSÌ COME QUI DESCRITTI. (ii) Ciascun utente è interamente responsabile delle proprie decisioni in merito all’idoneità dei prodotti, materiali, servizi, raccomandazioni o suggerimenti del Venditore per il suo impiego specifico. (iii) Ciascun utente è tenuto a identificare ed effettuare tutte le prove ed analisi necessarie a garantire che le parti finite da lui realizzate con l’integrazione di prodotti, materiali o servizi del Venditore siano sicure e adatte all’uso nelle condizioni finali d’uso. Nessun elemento del presente o altro documento, né nessuna raccomandazione o suggerimento orale, potrà essere considerato come una modifica, variazione, sostituzione o rinuncia a qualsiasi clausola delle Condizioni standard di vendita del Venditore o alla presente Clausola di garanzia da eventuali responsabilità, salvo che tale modifica sia stata specificatamente approvata in un documento scritto firmato dal Venditore. (iv) Nessuna dichiarazione qui contenuta e attinente a un utilizzo possibile o suggerito di qualunque materiale, prodotto, servizio o modello è intesa, o deve essere interpretata, come concessione di qualsivoglia licenza sulla base di qualunque brevetto o altro diritto di proprietà intellettuale detenuto dal Venditore relativamente a tale utilizzo o modello, o come raccomandazione per l’utilizzo di tale materiale, prodotto, servizio o modello in violazione di qualsiasi brevetto o altro diritto di proprietà intellettuale. SABIC Innovative Plastics è il marchio registrato di Sabic Holding Europe BV * marchio registrato della SABIC Innovative Plastics IP BV.