Idroval 09-12 - Valli Zabban S.p.a.
Transcript
Idroval 09-12 - Valli Zabban S.p.a.
IDROVAL Idropittura per manti bituminosi DESCRIZIONE Idropittura colorata specifica per la protezione e/o decorazione di manti impermeabili prefabbricati a base di bitume polimero. CARATTERISTICHE Aspetto: liquido Colore: bianco/verde/grigio/rosso/testa di moro Densità: 1,3+0,05 (20°C) Fuori polvere minuti: 60–90 (20°C) Residuo secco (%): 50+2 Essiccazione: 8–10 ore (20°C) Ph: 9+1 Viscosità Brookfield a 20°C: 4000+300 Resistenza agli agenti atmosferici: buona Resistenza al gelo/disgelo: buona Allungamento (%): 300 Temperatura minima di applicazione: +10°C IDROVAL aderisce perfettamente alle superfici bituminose ed ha grande resistenza agli agenti atmosferici. L'umidità eventualmente presente sulla superficie da proteggere non pregiudica il buon esito della verniciatura. PRODOTTO CLASSIFICATO «NON TOSSICO E NON NOCIVO» (D.M. 28.1.92 - art. 10). DILUIZIONE E RESA FINALE Può essere diluita con 10 ÷ 20% di acqua. Con IDROVAL si ottengono rese finali di 8 ÷ 10 m²/kg. AVVERTENZE E METODI DI APPLICAZIONE IDROVAL teme il gelo: non esporre le confezioni a temperatura inferiore a +5°C. Mescolare con cura prima dell'uso. I migliori risultati si ottengono stendendo il prodotto su manti impermeabili puliti e leggermente invecchiati (30 giorni dalla posa in opera). Applicare due mani di IDROVAL opportunamente diluito con un intervallo, dipendente dalle condizioni atmosferiche, variabile da 2 a 4 ore; si esalteranno così le caratteristiche di adesività dell'idropittura. Durante la stagione estiva l’applicazione di IDROVAL non va fatta durante le ore più calde per evitare un’evaporazione troppo veloce della parte liquida, in questo periodo è opportuno scegliere le prime ore del mattino o della sera, La posa di IDROVAL deve essere evitata su superfici dove possono verificarsi ristagni d’acqua. La copertura verniciata con IDROVAL deve essere sottoposta a manutenzione minimo annuale (prima dell’inverno) , devono essere rimosse le foglie e tutti i residui di terriccio trasportato dal vento o dalle acque meteoriche, deve essere verificata la funzionalità degli scarichi e verificato il regolare deflusso delle acque lungo le pendenze in modo da scongiurare il crearsi di aree di ristagno. Per una migliore garanzia di protezione la verniciatura andrebbe rifatta, previa profonda pulizia della copertura, almeno ogni 2 anni. IDROVAL si può applicare a pennello, rullo o spruzzo. COLORI Bianco, verde, grigio, rosso, testa di moro. CONFEZIONE IDROVAL è fornito in secchi da kg 25 netti. Rev. 4 - 09/12 IDROVAL Water paint for bituminous surfaces DESCRIPTION Coloured water paint mainly used to protect and decorate prefabricated waterproofing membranes based on polymer bitumen. FEATURES Appearance: liquid Colour: white/green/grey/red/dark brown. Density: 1,3+0,05 (20°C) Outside dust: 60–90 (20°C) Dry residue (%): 50+2 Drying: 8–10 ore (20°C) Ph: 9+1 Brookfield viscosity at 20°C: 4000+300 Resistance to atmospherical agents: good Resistance to freezing/ice-out: good Elongation (%): 300 Do not apply below: +10°C IDROVAL adheres perfectly to bituminous surfaces and is weatherproof. The humidity that may be present on the surface to be protected does not affect the good result of the work. CLASSIFIED AS "NON-TOXIC AND NON-HARMFUL" (D.M. 28.1.92 - ART. 10). DILUTION AND FINAL YIELD IDROVAL can be diluted with water in amount of 10 ÷ 20%. A final yield of 8 ÷ 10 m2/kg is obtainable. PRECAUTIONS AND APPLICATION METHODS IDROVAL has to be protected against temperatures below +5°C. Stir the product carefully before use. Excellent results are obtainable when the product is applied on clean and slightly aged (30 days after laying) roofings. Apply two coats of IDROVAL, adequately diluted, at intervals from 2 to 4 hours, depending on weather conditions; this way the adhesive properties of the water paint will be enhanced. In the Summer period IDROVAL should not be applied during the hottest hours to avoid a too fast evaporation of the liquid component, in this period early morning or evening are recommended. Laying of IDROVAL on surfaces with water stagnations must be avoided. The roof coated with IDROVAL must be maintained at least annually (before Winter time), leaves and all traces of soil carried by wind or storm water must be removed, the functionality of the drains and the regular flowing of water along the slopes so as to prevent the occurrence of stagnation areas must be checked and verified. For a better protection guarantee, the painting should be restored at least every 2 years, after cleansing the covering. IDROVAL can be applied by brush, roller or sprayer. IDROVAL can be applied by brush, roller or sprayer. COLOURS White, green, grey, red, dark brown. PACKAGING IDROVAL is available in 25 kgs. drums. Rev. 4 - 09/12