PTDLDCC RGB
Transcript
PTDLDCC RGB
Modulo controllo colore professionale a 3 canali RGB con alimentatore 110-240V integrato. Adatto per moduli led RGB in CDT con tre canali da 350mA (da 4 a 12,5W per canale). Funzionalità Master-Slave con possibilità di collegamento fino a 99 moduli “slave” (../SL/..) con funzionamento sincronizzato tramite cavo di segnale lungo 2 metri. Dimmerabilità separata per ogni canale con telecomando IR a infrarossi (TC/RGB/N). Modulo master con sensore IR compreso nella confezione; modulo “slave” comprensivo di cavo per collegamento sincronizzato; telecomando da ordinarsi separatamente. Funzionamento Con il tasto nero (1a) sul telecomando si possono selezionare 3 programmi colore: con pressione breve (<1sec) si selezionano in sequenza il programma arcobaleno ( tutti i colori), solo colori caldi, solo colori freddi. Con pressione prolungata (>1 sec) si spegne o si accende il sistema con memorizzazione dell’ultimo programma colore impostato anche in assenza di rete. Inoltre ciascun colore è regolabile separatamente tramite tasto colorato del telecomando (2a rosso-verde-blu): con azionamento breve (< 1 sec) si ha l’on-off colore; con azionamento prolungato (> 1 sec) si regola il colore con stop al minimo e al massimo. Fattore di potenza > 0,85. Protezioni: termica, sovraccarico, sovratensione e cortocircuito. Norme di riferimento: Sicurezza: EN 61347-1; EN 61347-2-13 Radio disturbi: EN 55015; EN 55015-A1; EN 55015-A2 Armoniche: EN 61000-3-2 Immunità: EN 61547 Professional RGB three channels colour control device with built in 110-240V power supply. Suitable for RGB CDT led modules with 3 channels for 350mA (from 4 to 12,5W per channel). Master-Slave functionality: till to 99 slave synchronized modules (../SL/..) can be connected by means of suitable 2 meters signal cable. Each colour is dimmable by means of IR remote control (TC/RGB/N). Master module with IR sensor within the packaging; “slave” module with cable for synchronization; remote control to be ordered separately. Operation By means of black button (1a) on remote control it is possible to select 3 colour programs. Rainbow (all colours), warm colours, cold colours programs can be selected in sequence with short push (<1 sec) on the button. The colour control device can be switched on and off by means of a long pressure( >1 sec) on the button with memory of the last program selected also in case of mains voltage interruption. Besides each colour can be regulated by means of buttons on remote control (2a redgreen-blue); with short push(<1 sec) colour on-off; with long push(>1 sec) colour dimming till stop at minimum and maximum. Power factor > 0,85. Protections: thermal, overload, overvoltage and short circuit. Standard reference: Safety: EN 61347-1; EN 61347-2-13 Radio Interferencies: EN 55015; EN 55015-A1; EN 55015-A2 Harmonics: EN 61000-3-2 Immunity: EN 61547 CDT PTDLDCC RGB PTDLDCC RGB CDT IP20 V PTDLDCC/RGB/B Master 110÷240 PTDLDCCRGBSLB Slave TC/RGB/N 110÷240 Hz W W min mA V out LxPxH (mm) Pcs Code Euro cad. 50÷60 12,5x3 4x3 350x3 39 ta °C tc °C 40 75 71,5x157x34 1 PTDLDCC/RGB/B 73,39 50÷60 12,5x3 4x3 350x3 39 40 75 71,5x157x34 1 PTDLDCCRGBSLB 77,89 174x29x18 1 TC/RGB/N 3,95 Telecomando IR - IR remote control 157 34 167 145 59 71,5 TC/RGB/N Telecomando IR (non incluso, da ordinare a parte). 2a Ricevitore infrarosso Infrared receiver 1a IR remote control (not included, to be ordered separately). Per ulteriori informazioni e per visionare altri sistemi RGB consulatre il Catalogo Components For further information and to view other RGB system, please refer to our Components catalogue Schemi di collegamento - Wiring diagrams PTDLDCC/RGB/B MASTER OUTPUTS SLAVE OUT N 230 VAC L BGRR+ G+ B+ Max 9 Max 37,5W PTDLDCC/RGB/SL/B SLAVE 01 N L 230 VAC Max 9 Max 37,5W OUTPUTS SLAVE IN SLAVE OUT BGRR+ G+ B+ + Slaves (MAX 99) LED 2014 - www.relcogroup.com 57 LEDs Drivers Art. LED Drivers RGB R OHS compliance