TFT LCD -5”/COL
Transcript
TFT LCD -5”/COL
I GB TFT LCD -5”/COL IS1168-AA Manuale di Installazione Installation manual Monitor a colori LCD TFT 5” senza fili 2.4 GHz 2.4 GHz Wireless CCD 5" TFT color LCD monitor 1/8 TFT LCD-5”/COL GUIDA DI INSTALLAZIONE RAPIDA – RICEVITORE (MONITOR LCD) Positivo al centro Ingresso Segnale Supporto Opzione Opzio ne Rosso: Video Giallo:ingresso ingresso video Bianco: ingr esso dio Bianco: ingresso au audio CONTENUTO CONFEZIONE: MONITOR LCD ALIMENTATORE CAVETTO MANUALE DI ISTRUZIONI 2/8 TFT LCD-5”/COL COMMUTAZIONE CICLICA E FUNZIONI MONITOR LCD DIP-SWITCH Entrambi i DIP in posizione ON Durata ciclo 2 secondi (1.1) Dip 1 in ON – Dip 2 in OFF 4 secondi (0.1) Dip 1 in OFF – Dip 2 in ON 8 secondi (1.0) Dip 1 in OFF – Dip 2 in OFF 12 secondi (0.0) Selezione canale E’ possibile selezionare il canale del ricevitore tramite i dipswitch. Per ricevere il segnale della telecamera sul canale CH1 posizionare in ON il dip-switch 1, per ricevere il segnale della telecamera sul canale CH2 posizionare in ON il dipswitch 2 etc… CH1: RICEZIONE CANALE 1 CH2: RICEZIONE CANALE 2 CH3: RICEZIONE CANALE 3 CH4: RICEZIONE CANALE 4 STAND-BY Led alimentazione (acceso fisso) e AV IN (lampeggiante) Led Canali di ricezione POWER ON & AV IN: pulsante di accensione e commutatore AV IN. Per commutare dalla modalità senza fili alla modalità filare tenere premuto il pulsante per 3 secondi fino a che il led comincia a lampeggiare 3/8 TFT LCD-5”/COL COMMUTAZIONE CICLICA / CANALI FISSI Quando il sistema è dotato di 2 o più telecamere premere uno dei tasti selezione canali sul ricevitore. Contemporaneamente premere “POWER”, il sistema entra automaticamente nella commutazione ciclica dei canali. Il led del canale selezionato si accenderà e il led del canale ricevuto lampeggerà. Premendo uno qualunque dei tasti canale si entra nella modalità CANALI FISSI. CARATTERISTICHE TECNICHE Risoluzione Sistema Retroilluminazione Luminosità (cd/m2) Fattore di Contrasto Antenna Frequenza Ingresso Video Uscita Video Ingresso Audio Uscita Audio Alimentazione Assorbimento Temperatura di funzionamento Umidità relativa Dimensioni Peso 600 x 234 NTSC / PAL EDGE LIGHT 240 120:1 Dipolo CH1= 2413 Mhz, CH2 = 2432 Mhz, CH3 = 2451 Mhz, CH4 = 2470 Mhz Video composito 1 V p-p, 75 Video composito 1 V p-p, 75 1 V p-p max 3 V p-p max 12Vcc DC 12V – 500 mA Da -5°C a +35°C 5% a 75% 155mm x 120 mm x 120 mm 470 gr 4/8 TFT LCD-5”/COL QUICK INSTALLATION GUIDE – RECEIVER (LCD MONITOR) Positive in the centre Signal line Install rack Option Option Red:Yellow: vid eo in put input video Whi te: vi deo ou tp ut White: audio input PACKING: LCD MONITOR POWER SUPPLY CABLE INSTRUCTION MANUAL 5/8 TFT LCD-5”/COL AUTO SEQUENCE AND FUNCTIONS OF LCD DIP-SWITCH Both switches ON Auto sequence duration 2 seconds (1.1) Dip 1 ON – Dip 2 OFF 4 seconds (0.1) Dip 1 OFF – Dip 2 ON 8 seconds (1.0) Dip 1 OFF – Dip 2 OFF 12 seconds (0.0) Channel selector You can set channel of receiver by the dip-switch, if you want watch camera of CH1 dip-switch 1 must be set “ON “ position, if you want watch camera of CH2 dip-switch 2 must be set “ON “ position etc.... CH1: CHANNEL 1 RECEIVING CH2: CHANNEL 2 RECEIVING CH3: CHANNEL 3 RECEIVING CH4: CHANNEL 4 RECEIVING STAND-BY Power indicator & AV In flashing Channel indicators POWER ON & AV IN: Power ON button and AV In switch. To switch between wired and wireless modes, press the button for three seconds until the light start to flash 6/8 TFT LCD-5”/COL AUTO SWITCH / FIXED CHANNEL When the system has two cameras or more, press one of the channel selection button of receiver. In the same time press POWER, the system will go into auto switch function. LED of selected channel will light and LED or receiving channel will flash. Press any key, the system go into fixed function TECHNICAL FEATURES Resolution DOT System Backlight Brightness (cd/m2) Contrast ratio Antenna Frequency Video input Video output Audio input Audio output Power supply Consumption Operation temperature Operation humidity Dimensions Weight 600 x 234 NTSC / PAL EDGE LIGHT 240 120:1 DIPOLE CH1= 2413 Mhz, CH2 = 2432 Mhz, CH3 = 2451 Mhz, CH4 = 2470 Mhz Composite video 1 V p-p, 75 Composite video 1 V p-p, 75 1 V p-p max 3 V p-p max 12Vdc DC 12V – 500 mA Da -5°C a +35°C 5% a 75% 155mm x 120 mm x 120 mm 470 gr 7/8 TFT LCD-5”/COL ELKRON S.p.A. Via G. Carducci, 3 – 10092 Beinasco (TO) – ITALY Tel. +39 (0)11.3986711 – Fax +39 (0)11.3499434 8/8 - mailto: [email protected] www.elkron.it TFT LCD-5”/COL