flat-tip screwdrivers - Fip Italy articoli tecnici

Transcript

21-
FIP ARTICOLI TECNICI SRL
21 - TOOLS AND INSTRUMENTS
HAND TOOLS FOR BUSINESS 3
MANUAL TOOLS FOR WORKSHOPS 30
TOOL BAGS AND BOXES 59
ELECTRIC TOOLS AND ACCESSORIES 69
ELECTRICAL MATERIALS 83
AUTOGENOUS WELDING 86
CATALISTINO
www.fipitaly.com
Ed. 04/2015
We have made every effort to ensure that details and information given in this catalogue are accurate at the time of issue but give no guarantees as
to the accuracy or completeness of such information. Full technical specifications are not necessarily included and furthermore our policy is one of
continuous improvement and the right is reserved to alter details and information at any time as the need arises. No part of this publication may be
reproduced or transmitted in any form or by any means including photocopying and recording, without our written permission.
GENERAL TERMS OF SALE
1) General Terms: products and/or services supplied by FIP
Articoli Tecnici S.r.l., hereinafter referred to as the Seller,
are regulated by the hallowing condition terms and the
Buyer declares that he knows and accepts them at the time
of his order. By accepting these terms the Buyer, also,
renounced any of his own general purchase terms,
considered individually or on the whole.
2) Orders: the orders are subject to these general terms.
3) Prices: the prices applied are those in force at the time of
order, unless the Buyer asks partial delivery, in which case
the prices in force at the time of the requested shipment
will be applied.
4) Packing: the cost is normally included in the price;
special packing requested by the Buyer will be charged at
the pure cost.
5) Tolerance: in clearing the order, the Seller is entitled to a
tolerance of ± 10% above or below the quantity ordered
and confirmed; the amount charged will correspond to the
real quantity.
6) Transport and returned goods: the goods are sold ex
works from the Seller’s warehouse, unless explicitly agreed
to the contrary; the goods always travel at the Buyer’s own
risk. Insurance coverage will be provided only on specific
request and at the Buyer’s expense.
7) Delivery: the delivery times are indicative and are not
binding for the Seller, who does not accept responsibility
for damage due to non-delivery, to interruptions,
suspensions and delays in supply due to the impossibility or
even to particular difficulties in obtaining raw materials, to
orders or directives issued by the public authorities, or to
any causes beyond the Seller’s control, which may alter the
regular progress of the supplies.
8) Payments: all the payments must be made to the
domicile of the Seller. The issue of draft, acceptance of bills
or checks payable out-of-town does not constitute
exemption from the condition of making payments to the
domicile of the Seller. Payments are due on the agreed
date, even in cases of delay in arrival of the goods, or faults
or partial or total losses during the transport, and also in
cases where the goods, placed at the Buyer’s disposal by
the Seller, are not collected by the Buyer. Where no
exception is made by the provisions of this point or by
other agreements made, art. 1498 of the Civil Code will be
applied. In the event of delayed payment the Seller is
entitled to issue a draft at sight with expenses, raised by
the expenses for collection and interest for arrears at the
current bank rate, increased by three percentage points to
cover bank charges and expenses.
9) Suspension or cancellation of orders: when any one of
the condition established for the supply is not respected,
even only in part, or when variations of any kind are made
in the company name, constitution or commercial capacity
of the Buyer, and in the case of ascertained difficulty in
payment encountered by the Buyer with respect to third
parties, the Seller is entitled to suspend further delivery, or
to ask immediate payment of the sums owed, to ask for
surety before completing the supply or to suspend delivery
of the part not delivered.
10) Property of the good is ruled by art. 1523 and
followings of the Italian Civil Code, therefore goods remain
of the Seller property if not completely paid, including
interest and other expenses.
11) Guarantees: the Seller guarantees compliance of the
products supplied with the technical characteristics
indicated by the Seller, but not their use, over which he has
no possibility of control. No responsibility can therefore be
attributed to the Seller for any damage deriving from the
use of the products supplied, and no claim can be made
except the replacement of goods that have been proved
not complying with the requirement, on condition that the
complaint is made and the goods are returned within the
terms and under the conditions listed below article 13 and
14.
12) Complaints: any complaints concerning non-compliance
with the guarantee as described in the previous article must
be communicated to the Seller within 8 days from receiving
the goods by the Buyer. The complaint cannot be accepted
until the Seller has inspected the goods; for this inspection
the goods must be totally or partly returned, the following
article will apply.
13) Returned goods: the return of goods must be
authorized beforehand by the Seller and must be with
freight prepaid, all expenses covered.
14) Competent court: the Buyer agrees with the Seller that
the competent court for all disputes or legal action is the
Court of Padua.
TOOLS AND INSTRUMENTS - 21
HAND TOOLS FOR BUSINESS CHISEL TIP
Descrizione
Z-C-SCALPELLO DA MURAT. MM.300 PUNTA EC
Lenght mm
300
CUTTING CHISEL
Descrizione
Z-C-SCALPELLO DA MURAT. MM.300 TAGLIO EC
Lenght mm
300
CARPENTER HAMMER
45 cm painted handle, forged head in C45 steel, induction hardened, epoxy powder-coated with polished
and edged swing and feathers.
Descrizione
Weight gr
Z-C-MARTELLO CARPENTIERE 300 BRAGOT.320
300
Z-C-MARTELLO CARPENTIERE 400 BRAGOT.320
400
GERMAN HAMMER
Shaped painted handle, head according to DIN 1041 and C45 steel forged, induction hardened, polished
and painted with epoxy powder with polished and edged swing and peen. Round steel and resin locking
wedge.
Descrizione
Z-C-MARTELLO TIPO TEDESCO GR. 100 376
3
Descrizione
Z-C-MARTELLO TIPO TEDESCO GR.1000 376
WOODEN HANDLE FOR HAMMER
Descrizione
Z-MANICO LEGNO X MARTELLO CARPENT.CM.45
SLEDGEHAMMER
Painted handle, forged in C45 steel, induction hardened, epoxy powder coated with edged and polished
head. Locking steel wedge.
Descrizione
Z-C-MAZZETTA MINATORE C/MAN.GR. 800 495#
Z-C-MAZZETTA MINATORE C/MAN.GR.1000 495
Z-C-MAZZETTA MINATORE C/MAN.GR.1250 495#
WOODEN HANDLE FOR STICK
Descrizione
Z-MANICO LEGNO X MAZZETTA CM.30
4
CLUB WITH HANDLE
90 cm painted handle. Hardened and forged steel head epoxy powder-coated, polished and edged
hammer.
Descrizione
Z-C-MAZZA C/MAN. 2 TES/QUAD.GR. 3000 512
WOODEN HANDLE FOR CLUB
Descrizione
Z-MANICO LEGNO X MAZZA CM.90
SYNTHETIC HANDLE FOR CLUB
Descrizione
Z-MANICO SINTETICO X MAZZA
AXE
Descrizione
Z-ACCETTA GR. 800
Z-ACCETTA GR.1200
5
PICK
In forged steel
Descrizione
Z-C-PICCONE PUNTA CRES. GR.1500 682 #
Weight gr
1500
WOODEN HANDLE FOR PICK
Descrizione
Z-MANICO LEGNO X PICCONE CM.95
Size cm
95
FORGED STEEL SHOVEL
Tip shovel for construction works without handle. In forged steel.
Descrizione
Z-C-BADILE ACCIAIO FORGIATO S/MANICO
Weight gr
1100
SHOVEL
Painted plate shovel without handle.
Descrizione
Z-C-BADILE ACCIAIO X EDILIZIA S/MANICO #
Peso gr:
900
6
DURABLE SHOVEL
Hardened steel round tip shovel with handle.
Descrizione
Z-C-BADILE DURABLE PUNTA C/MANICO
Weight gr
1600
WOODEN SHOVEL HANDLE
Descrizione
Z-MANICO LEGNO X BADILE CM.140
Size cm
140
SYNTHETIC HANDLE FOR SHOVEL
Unbreakable synthetic material.
Descrizione
Z-MANICO SINTETICO X BADILE CM.140
Size cm
140
RAKE
In painted steel, withouth handle.
Descrizione
Z-C-RASTRELLO A 10 DENTI
7
RAKE WITH REINFORCEMENT
In painted steel, withouth handle.
Descrizione
Z-C-RASTRELLO A 12 DENTI C/RINFORZO
Z-C-RASTRELLO A 22 DENTI C/RINFORZO
TINPLATE MUD RASP
Descrizione
Z-C-RASPAFANGO IN LAMIERA CM.40
BROOM WITHOUT HANDLE
Descrizione
Z-SCOPA A SPINTA CM. 60 S/MANICO
PLASTIC BROOM WITHOUT HANDLE
Descrizione
Z-SCOPA PLAST.A CAMPANA IND.LE S/MANICO
8
INDUSTRIAL BROOM WITHOUT HANDLE
Descrizione
Z-SCOPA PLAST.IND.LE CM.35 S/MANICO
HOUSEHOLD PLASTIC BROOM WITHOUT HANDLE
Descrizione
Z-SCOPA PLAST.USO DOMESTICO COL. S/MANIC
BESOM BROOM
With handle
Descrizione
Z-SCOPA SAGGINA
WOODEN HANDLE FOR BROOM AND RAKE
Lenght 145 cm.
Descrizione
Z-MANICO LEGNO SCOPA SPINTA/RASTR. 145CM
9
SQUARE TIP MASON’S TROWEL
Descrizione
Z-C-CAZZUOLA MURATORE P.QUADRA 120
ROUND TIP MASON’S TROWEL
Descrizione
Z-C-CAZZUOLA MURATORE P.TONDA 180
MASON’S BUCKET
Descrizione
External diam. mm
Volume lt
340
10
SECCHIO MURATORE NERO
1
MORTAR CASES
Descrizione
CASSE PER MALTA
Size mm
Volume lt
670x460x180
30
1
5
10
PLASTERER’S SPATULA
Heavy-duty and resistant. In steel with wooden handle.
Descrizione
Size mm
Z-C-SPATOLA DA STUCCATORE N° 5
50
60
80
Z-C-SPATOLA DA STUCCATORE N°10
100
PVC PLASTERING TROWEL
Integral plastering trowel; plastic handle and base. Single block
Descrizione
Z-FRATTAZZO PVC 140X440
Z-FRATTAZZO PVC 180X270
PVC PLASTERING TROWEL WITH SPONGE
Plastic handle and base. Orange sponge.
Descrizione
Z-FRATTAZZO PVC C/SPUGNA ARANCIO 140X210
CURVED BRUSHES
Descrizione
Z-PENNELLO CURVO PER RADIATORI MM.30
11
OVAL BRUSHES
Descrizione
Z-PENNELLO OVALINO N. 6
Z-PENNELLO OVALINO N. 8
Z-PENNELLO OVALINO N.10
Z-PENNELLO OVALINO N.12
FLAT BRUSHES
Descrizione
Z-PENNELLO PIATTO MM.30
CEILING BRUSHES
Descrizione
Z-PENNELLO PLAFONE 120X 30
ROLLER BRUSHES
Descrizione
Z-PENNELLO RULLO MM.200 IN LANA
12
GALVANIZED STEEL ABRAMS’ CONE WITH KIT
Suitable for measuring the consistency of fresh cohesive concrete and packed with aggregates having
maximum size not greater than 40 mm.
Descrizione
Z-CONO DI ABRAMS ACC.ZINC.-C/KIT
MOD FOR CONCRETE SPECIMENS
Made with high density, one-piece, crushproof, reusable material. The internal surfaces are studied in
order to avoid the adjustment of the specimens before the test of breakage.
Descrizione
Z-STAMPI X PROVINI CLS CUBI CM.15 1P PVC
PENCIL FOR BRICKLAYERS AND CARPENTERS
Oval profile and hard lead. Red painted.
Descrizione
Z-MATITA DA FALEGNAME ROSSA MM.180
Lenght cm:
18
PENCIL FOR BRICKLAYERS
For stonemasons with oval profile and hard lead. Green painted.
Descrizione
Z-MATITA DA MURATORE VERDE MM.250
Lenght cm:
25
13
MASON’S LEAD
Descrizione
Z-C-PIOMBI MURATORE CILINDRICI GR.300
SCRIBER
Descrizione
Z-HOD-PUNTE A TRACCIARE MATITA HF604/ZP
LINES TRACKER AND CHALK
Descrizione
Z-HOD-SEGNALINEE HF 1189/30
Z-HOD-GESSO X SEGNALINEE HF1196/100 BLU
Z-HOD-GESSO X SEGNALINEE HF1196/250 BLU
Z-HOD-GESSO X SEGNALINEE HF1196/100 ROSS
MARKERS FOR METALS
Suitable for marking all types of surface: metal, glass, porcelain, plastic, rubber, wood, cardboard, etc..
Descrizione
Z-HOD-MARCATORE PER METALLI BIANCO
Z-HOD-MARCATORE PER METALLI BLU
Z-HOD-MARCATORE PER METALLI GIALLO
Z-HOD-MARCATORE PER METALLI NERO
Z-HOD-MARCATORE PER METALLI ROSSO
Z-HOD-MARCATORE PER METALLI VERDE
14
DOUBLE STANDARD YARDSTICK 1/2 STICK
Wooden slats with sealed steel springs. Red decimals and heads. Double rows of millimetres. Colors:
WHITE / YELLOW, customizable.
Descrizione
Measure mt:
Class
2
III
Z-METRO DOPPIO LEGNO BIANCO/GIALLO
FLEXOMETER
ABS Ergonomic case. Tape made of carbon steel with great number readability. Belt attachment steel clip.
Without locking tape. Accuracy class II. PACKAGED IN BLISTER
Descrizione
Tape widht mm
Z-HOD-FLESSOMETRO HF 775 DA 2 MT.
16
16
19
25
IRWIN TAPE MEASURE RANGE
All kind of measuring jobs. Available in 3m, 5m and 8m.
Descrizione
Z-FLESSOMET. MT. 3 NASTRO 13 BULK IR
MEASURING TAPE
Impact-resistant ABS enclosure. High resistance plastic material starting ringfixed to the bend with safety
rivets. Bend in fiberglass with reinforced initial segment. Rewind mechanism operated with a retractable
handle. Accuracy Class: III
Descrizione
Tape widht mm
Z-HOD-ROTELLA METRICA HF791 DA MT.10
15
15
15
15
MEASURING ROLLER TAPE
Measuring tape with 13 mm enameled steel tape. Accuracy according to EU standards. CL II. Ergonomic
handle with rubber insert. Metal structure. Snap handle. 50 mt steel tape with millimeters.
Descrizione
Z-ROTELLA METRICA NASTRO ACC. MT. 50
3 ADJUSTED BASIS VIALS LEVELS
High resistance anodized aluminum body, thickness 1.5 mm. Antishock acrylic vials. Reinforced base.
Working precision 0.5 mm/m. Width 22 mm.
Descrizione
Z-HOD-LIVELLA HF 1180/CM. 30
Z-HOD-LIVELLA HF 1180/CM.100
2 VIALS MAGNETIC LEVELS
High resistance anodized aluminum body thickness 1.5 mm. Antishock acrylic vials. Reinforced base.
Working precision 0.5 mm/m. Width 22 mm.
Descrizione
Z-HOD-LIVELLA HF 1183/CM.100
16
SLIDING CALIPERS
Chromed stainless steel. 4 functions. Internal and external controls. Depth and tracking. UNI ISO 3599 DIN 862
Descrizione
Z-HOD-CALIBRO A CORSOIO HF 9300
Lenght mm
Hooks mm
230
40
DIAL CALIPERS
Made in stainless steel, fast forward thumbwheel and protected rack. Resolution: 0.02 mm. DIN 862
Descrizione
Z-HOD-CALIBRO A OROLOGIO
HF 9306
Lenght mm
Hooks mm
230
40
DIGITAL CALIPERS
LCD display with RS 232 serial output. Converting mm and inches. Switching on and off with button, reset
in any point. It allows 4 types of measurements. In a case - Resolution 1/100 mm (0.01 mm). With ABS.
Large LCD display (digit height 7.5 mm) according to DIN 862.
Descrizione
Z-HOD-CALIBRO A CORSOIO DIG.L.150 HF9309
Lenght mm
Hooks mm
150
40
BOW SAW
Arched bow saw, steel blade with straight-set and hardened toothing. Structure in painted steel. Tilting
blade.
Descrizione
Blade lenght mm
Z-SEGONCINO MM.530
530
Z-SEGONCINO MM.610
610
17
SPARE SANDVIK BLADES
Made of steel with straight-set and hardened toothing.
Descrizione
Blade lenght mm
Z-SEGONCINO-LAME DI RICAMBIO PER 530
530
Z-SEGONCINO-LAME DI RICAMBIO PER 610
610
CLASSIC MODEL ARCH
High-strength balanced structure for professional use. Ergonomic shock-resistant plastic and aluminum/
plastic end. For 300 mm (12 inches) blades . Lacquered tubular arch. Supplied with cobalt blade.
Descrizione
Z-HOD-ARCHETTO HF 102 C/LAMA
Lenght mm
Height mm
525
110
BLADE FOR ARCH
Manufactured from HSS steel with added cobalt. Four different hardnesses blade thanks to its gradual
hardening. Side set toothing - electrostatic painting. Tested to AFNOR NFE 73-072 rules. Recommended
for difficult conditions works on hard materials such as steels to stainless steels. Features: multi-use, flexible, unbreakable, ideal for intensive use.
Descrizione
Z-HOD-LAME A MANO BI-HARD Z 24
Lenght mm
Widht mm
Thickness mm
Teeth in an inch
300
13
0,65
Z24
PLUS HANDSAWS
Water based lacquer gives four times better rust protection than traditional lacquer, high quality steel
blade that is stable and ensures maximum power transfer, new ergonomically designed two-component
soft-grip handle for increased grip and enhanced comfort, sharp razor, double-ground teeth that cut in
both the push and pull stroke for transfer cutting with less effort, hard point teeth for longer life.
Descrizione
Z-SEGACCIO UNIVERSALE 880 PLUS MM.500 2”
18
BAR BENDER
Jaw bending in forged, hardened and painted steel.
Descrizione
Z-C-PIEGAFERRI D. 8
Z-C-PIEGAFERRI D. 10
TWO-MOUTHS BAR BENDER
In hardened, forged and galvanized steel.
Descrizione
Z-C-PIEGAFERRI D. 6/ 8 A DUE BOCCHE
Z-C-PIEGAFERRI D. 10/12 A DUE BOCCHE
Z-C-PIEGAFERRI D. 14/16 A DUE BOCCHE
CROWBAR
In forged steel.
Descrizione
Size cm
Weight kg
Z-C-LEVA A UNGHIA APERTA MM.1000
100
4
120
6
140
8
19
DISARMAMENT LEVER
Italian type
Descrizione
Size cm
Diam. mm
Z-C-LEVERINO DISARMO TIPO ITA CM60/16
60
16
Z-C-LEVERINO DISARMO TIPO ITA CM80/18
80
18
PLASTIC COATED IRON STAKES
Round or octagonal.
Descrizione
Z-PALINE OTTOG.ANIMA FERRO D.28
Height cm
Diam mm
160
28
KNIPEX PRINCERS
Used to twist and cut the wire from the roll in one quick and safe operation. Hardness of cutting edges
approx. 61 HRC. Special forged, oil-hardened steel. Boxes of 6 pcs.
Descrizione
Z-KNIPEX-TENAGLIE CEMENTISTI MM.250
Z-KNIPEX-TENAGLIE CEMENTISTI MM.280
SIDE CUTTING NIPPERS
Special tool chrome vanadium steel which provides high toughness and uniformity of hardness. Entirely
tempered body with induction hardened cutter. Chrome-plated head, glossy finish. PVC insulated
handles. DIN 5238 - UNI-ISO 5749.
Descrizione
Z-HOD-TRONCHESE FIRMA 164/160
L mm
A mm
B mm
C mm
160
21
10
20
20
KNIPEX ADJUSTABLE PLIERS
Atramentised gray pliers, clean head, non-slip plastic coated handles. FAST ADJUSTMENT AND ACCURATE
PRESSURE BY THE BUTTON DIRECTLY ON THE WORKING PART. Fine adjustment allows adaptation to the
pieces to tighten even in the most various forms and helps to find the optimal position of the handles for
the hand. Self-locking on hoses and nuts: no slipping on the workpiece to tighten. Surfaces of the jaws
with treated with a special tempering toothing, the hardness of teeth approx. 61 HRC: grip with high wear
resistance. Passing joint: high stability thanks to the double guide. Secure click hinge pin: no unintentional shifting adjustment. With contrast lock to prevent accidental crushing. Chrome vanadium steel,
forged, oil termpered.
Descrizione
Z-KNIPEX-PINZA “COBRA” MM.300
Z-KNIPEX-PINZA “COBRA” MM.400
MULTIPLE PLIERS FOR HYDRAULICS
Hinge closed models. T-ribbed and milled handles. Forged in chrome vanadium steel and fully hardened
body. High resistance toothing with additionally induction hardened temper. Sliding adjustment precision for a perfect parallelism of the clamps and quick positioning. Regulation to 6 positions. DIN 5231
UNI-ISO 8976
Descrizione
Lenght mm
Max opening mm
Z-HOD-PINZA MULTIPLA X IDRAULICI 744/240
240
35
Z-HOD-PINZA MULTIPLA X IDRAULICI 744/300
300
42
UNIVERSAL PLIERS
Multi grip jaws - groove direction, cable cutter up to ø 1,6 mm, induction hardened cutting face to stay
longer sharper, chromium nickel steel for improved durability on the gripping and cutting face, moulded
2 component handle - comfortable, pull-resistant handles.
Descrizione
Z-PINZA UNIVERSALE MM.170
IR
Z-PINZA UNIVERSALE MM.200
IR
LONG NOSE PLIERS
Long grip jaws - groove direction, induction hardened cutting face to stay sharper longer, cable cutter
up to ø 1,6 mm cables, chromium nickel steel for improved durability on the gripping and cutting face,
moulded 2-component handle - comfortable, pull-resistant handles.
Descrizione
Z-PINZA A BECCO LUNGO MM.150
IR
Z-PINZA A BECCO LUNGO MM.200
IR
21
BENT NOSE PLIERS
40° Bent Nose Grip Jaws - Groove Direction, induction hardened cutting face to stay longer sharper, cable
cutter up to Ø 1,6 mm, chromium nickel steel for improved durability on the gripping and cutting face.
Moulded 1 component handles - comfortable, pull-resistant handles.
Descrizione
Z-PINZA A BECCO LUNGO PIEG. MM.200 IR
FRONTAL CUT CROPPER
Made of forged and hardened high strength steel. Additionally hardened with induction cutting edges.
Tubular steel handles designed for an optimum weight/shear force ratio. PVC non-slip grips.
Descrizione
L mm
B mm
C mm
D mm
F mm
Z-HOD-TAGLIABULLONI HF 800/480
480
34
70
34
8
650
37
86
42
9,7
750
38
96
46
11,2
900
45
110
50
13,7
MINI CROPPERS
SK 5 special high-strength, forged steel, additionally hardened, accuraterly shaped blades. Housing made
of sheets of high-strength steel. Insulated thermoplastic non-slip handles. Chromed hook closure. Ideal
for cutting copper, aluminum, iron and steel up to Ø 4 mm (R = 800 N/mm2). Adjustable finger guard.
CUT AT THE LEVEL.
Descrizione
Z-HOD-TAGLIABULLONI HF 810
L mm
B mm
C mm
D mm
F mm
210
12
43
6
4,5
SHEAR FOR ELECTRIC CABLES
Special steel for tools with high carbon content that guarantees high toughness and uniformity of
hardness. Entirely hardened oil body, with further induction hardened cutting edge. Blades hardness 5355 HRC. Plastic-coated handles. For cutting multifilament cables 60 mm2.
Descrizione
Z-HOD-TAGLIACAVI GRANDE EFFETTO HF994
Lenght mm
Weight gr
240
490
22
KNIPEX CABLE SHEAR (RATCHET SYST.) WITH TELESCOPIC HANDLES
Cable Shears with adjustable and folding telescopic handles. For cables up to Ø 38 mm, folding handles
for adjusting the optimum spam, also suitable for working in confined spaces. Comfortable working
thanks to the ratchet and to its light weight. High-strength aluminum tubular oval telescopic handles; removable up to 770 mm for maximum leverage effect on the cables of large diameter; readjustable to 570
mm for space-saving transport. Interchangeable head. Wide range of cutting up to max. Ø 38 mm or max.
280 mm² (eg 4 x 70 mm² NYY) for Cu and Al single and multicore cables . Easy and clean cutting, thanks
to the optimized shape of the cutting edges. Adjustable screw joint. Head: hardened and tempered oilhardened special steel. Handles: tubular aluminum oval, highly resistant. With adjustment button.
Descrizione
Z-KNIPEX-TAGLIACAVI D.38 C/MANICO TELES.
RATCHETING SHEAR FOR STANDARD PVC HOSES
Lightweight easy to handle aluminum alloy body. Special SK5 steel blades for precise cutting. Blade
hardness 53-55 HRC
Descrizione
Z-HOD-CESOIA A CRICCHETTO HF 57
Lenght mm
For hoses Ø mm
195
6 - 25
LONG RATCHETING SHEAR FOR STANDARD PVC
HOSES
Lightweight, easy to handle aluminum alloy body. Special SK5 steel blades for precise cutting. Blade
hardness 53-55 HRC
Descrizione
Z-HOD-CESOIA A CRICCHETTO HF 59
Lenght mm
For hoses Ø mm
430
6 - 63
CUTTER SHEAR
Professional model for cuts of metal sheets up to 1.2 mm without deforming the blade. Provided with a
chip breaker and cutter. The internal mechanism allows cutting with minimal effort. lever safety locking
device in the closed position with cutter up to Ø 3 mm. Ideal for cutting binary of drywall, electronic printed circuit, works of modeling. Recommended for: Galvanized sheet galvanized up to 1.2 mm thick, brass
and copper up to 1.5 mm thick, PVC, aluminum and tiles vinyl up to 2 mm thick.
Descrizione
Z-HOD-CESOIA RODITRICE HF 56
Lenght mm
Weight gr
265
480
23
CABLE-CUTTER SHEAR
For cutting up to Ø 20 mm. Grinded and angled blades allowing clean cuts. Hidden spring automatic
opening. Button locking.
Descrizione
Z-HOD-CESOIA TAGLIACAVI HF 32
Lenght mm
Weight gr
230
430
ROPE-CUTTER SHEAR
Compact and lightweight tool with reported blades and handles made of forged aluminum. Great ability
of cutting through demultiplier. Nickel chrome steel blades. Surface hardening heat treatment. For
cutting mild steel multi-fiber cables 60/100 Kg/mm2: up to Ø 8 mm. To cut hard steel cables MFA 130/160
Kg/mm2: up to Ø 7 mm. For cutting filled cables 60/70 Kg/mm2: up to 6 mm
Descrizione
Z-HOD-CESOIA TAGLIAFUNI HF 34
Lenght mm
Weight gr
340
890
LEFT-HANDED-CUT METAL SHEETS-CUTTER SHEAR
Articulated hinge professional model with high precision and low shear stress. Special hardened steel
central pins. Hot forged and hardened steel blades. The toothed profile of the blade retains the sheet
during the cutting. Ergonomic PVC insulated handles. Hinge with locking lever and return spring. Highperformance model for continuous and long cuts. For left-handed cuts. Cutting thickness: 1.2 mm - 1 mm
(stainless steel)
Descrizione
Z-HOD-CESOIA TAGLIALAMIERE HF 41 L
L mm
A mm
B mm
D mm
252
35
28
36
LEFT-HANDED-CUT METAL SHEETS-CUTTER SHEAR
during the cutting. Ergonomic PVC insulated handles. Hinge with locking lever and return spring. Highperformance model for continuous and long cuts. For right-handed cuts. Cutting thickness: 1.2 mm - 1
mm (stainless steel)
Descrizione
Z-HOD-CESOIA TAGLIALAMIERE HF 41 R
L mm
A mm
B mm
D mm
252
35
28
36
24
STRAIGHT-CUT METAL SHEET-CUTTER SHEAR
during the cutting. Ergonomic PVC insulated handles. Hinge with locking lever and return spring. For
straight cuts. Cutting thickness: 1.2 mm - 1 mm (stainless steel)
Descrizione
Z-HOD-CESOIA TAGLIALAMIERE HF 42 S
L
A mm
B mm
D mm
248
28
20
40
SWEDISH MOD. PIPE WRENCH WITH 90° CLAMPS
Forged and hardened chrome vanadium steel body. Ergonomic finger-guard handle. High resistance with
additionally induction hardened temper toothing. Ribbed handles for extra strength. Handle forged in
one piece with the upper clamp. Thread turned. Thin clamps for use in difficult to access locations. Balanced structure for use even with one hand. DIN 5234.
Descrizione
For hoses in inch.
Opening mm
Lenght mm
1”
50
325
1.1/2”
60
415
Z-HOD-GIRATUBI HF 571-90° 2”
2”
80
540
3”
105
685
Z-HOD-GIRATUBI HF 571-90° 1”1/2
SWEDISH MOD. PIPE WRENCH WITH 45° CLAMPS
Forged and hardened chrome vanadium steel body. Ergonomic finger-guard handle. High resistance with
additionally induction hardened temper toothing. Ribbed handles for extra strength. Handle forged in
one piece with the upper clamp. Thread turned. Thin clamps for use in difficult to access locations. Balanced structure for use even with one hand. DIN 5234.
Descrizione
For hoses in inch.
Opening mm
Lenght mm
1/2”
35
265
1”
45
335
1.1/2”
55
430
2”
70
555
3”
95
700
Z-HOD-GIRATUBI HF 671-45° 1/2”
Z-HOD-GIRATUBI HF 671-45° 1”1/2
25
AMERICAN MOD. PIPE WRENCH WITH CAST IRON
BODY
Induction hardened steel clamps. Malleable forged iron body. Toothing hardness 55 HRC. Ribbed
high-strength balanced for more comfort structure. Thread precision of the clamps. Clamp with spring
mechanism inside.
Descrizione
Lenght inches
Lenght mm
For hoses in inch. Opening D mm
S mm
Z-HOD-GIRATUBI HF 1000/ 8”
8”
203
1”
34
14
Z-HOD-GIRATUBI HF 1000/10”
10”
255
1.1/2”
49
17
12”
305
2”
60
21
14”
355
2”
60
21
18”
457
2,1/2”
76
26
24”
610
3”
90
28
AMERICAN MOD. PIPE WRENCH WITH ALUMINIUM ALLOY BODY
Induction hardened steel clamps. Toothing hardness: 55 HRC . Ribbed high-strength balanced for more
comfort structure. Thread precision of the clamps. Clamp with spring mechanism inside. High-strength
aluminum alloy body. Low specific weight then it guarantees great ease of use.
Descrizione
Lenght inches
Lenght mm
For hoses in inch. Opening D mm
S mm
14”
355
2”
60
21
18”
457
2.1/2”
76
25
24”
610
3”
90
28
POCKET PIPE CUTTER
Body and knob made of aluminum alloy. Bearings, feed screws and springs in stainless steel for tools.
Steel SK 2 cutting wheels . Models for metal pipes are fitted with a flarer and a replacement wheel. Screw
return. Cutting capacity: min. 1/8 “. - Max 1 “
Descrizione
Z-HOD-TAGLIATUBI A VITE HF 850/25
Cutting capacity min - max
Lenght mm
1/8” - 1”
65
26
SCREW PIPE CUTTER
Steel SK 2 cutting wheels. Models for metal pipes are fitted with a flarer and a replacement wheel. Screw
return. Cutting capacity: min. 1/8 “- max 1.1/8”
Descrizione
Lenght mm
1/8” - 1.1/8”
160
TELESCOPIC PIPE CUTTER WITH TWO BEARINGS
Descrizione
Lenght mm
1/8” - 1.3/8”
140
IRON PIPE CUTTER
Descrizione
Z-HOD-TAGLIATUBI A VITE HF 853
Lenght mm
1/8” - 2”
400
TELESCOPIC PIPE CUTTER WITH 4 BEARINGS
Steel SK 2 cutting wheels. Quick wheel change system without tools. Screw return. Models for metal pipes
are fitted with a flarer and a replacement wheel. Cutting Capacity: min 1/4 “- max 2.5 / 8”
Descrizione
Lenght mm
1/4” - 2.5/8”
215
27
KNIPEX PIPE CUTTER FOR FLEXIBLE PLASTIC PIPES AND SHEATS
For cutting thin lining plastic reinforced with glass fibers pipes Ø 25 mm (1 “), and rubber hoses. Not suitable for cutting cables. With opening spring and locking lever. Tool body in plastic material reinforced with
glass fiber. Replaceable blade made of oil-hardened, special steel.
Descrizione
Z-KNIPEX-TAGLIATUBO X TUBI PLAST. 2/25
KNIPEX PIPE CUTTER FOR PLASTIC RIGID PIPES
For cutting coated pipes and hoses with synthetic resin section up to Ø 40 mm. To cut hoses with ratchet
system in more corses. With supporting mobile jaws for the exact bearing of the hose for 90° cuts. Tool
body made of chrome vanadium hardened, oil tempered steel. Oil-hardened, tempered and hardened
steel replaceable blade.
Descrizione
Z-KNIPEX-TAGLIATUBO X TUBI PLAST. 6/40
CARPENTER’S BAG
Carpenter’s bag made of split cowhide with belt.
Descrizione
Z-BORSA CARPENTIERE CROSTA CON CINT.
BELT PLIERS HOOK
Made of galvanized steel, patented.
Descrizione
Z-C-GANCI DA CINTURA PORTA TENAGLIA
28
BELT HAMMER HOOK
Made of galvanized steel, patented.
Descrizione
Z-C-GANCI DA CINTURA PORTA MARTELLO
29
MANUAL TOOLS FOR WORKSHOPS FLAT-TIP SCREWDRIVERS
Chrome vanadium steel, high resistance blade. Induction hardened black tip. Ergonomic and patented
handle made of two-component, non-slip material. High resistance to shocks. UNI 5264 DIN 10562 ISO
2380
A mm
B mm
C mm
D mm
E mm
Z-HOD-CACCIAVITI FIRMA 500 3 X 80
Descrizione
0,5
3
80
3
165
Z-HOD-CACCIAVITI FIRMA 500 4 X100
0,8
4
100
4
190
Z-HOD-CACCIAVITI FIRMA 500 5,5X100
1
5,5
100
5
200
1
5,5
150
5
250
1,2
6,5
100
6
210
1,2
6,5
125
6
235
1,2
6,5
150
6
260
1,2
6,5
200
6
310
1,2
8
150
7
270
1,2
8
200
7
320
1,6
10
200
8
320
2
12
250
9
370
PHILLIPS-TIP SCREWDRIVERS
handle made of two-component, non-slip material. High resistance to shocks. DIN 5260 UNI-ISO 8764
Descrizione
PH-N°
A mm
B mm
C mm
Z-HOD-CACCIAVITI FIRMA 520-PH0 3 X 60
0
60
3
145
Z-HOD-CACCIAVITI FIRMA 520-PH1 4,5X 80
1
80
4,5
180
Z-HOD-CACCIAVITI FIRMA 520-PH1 4,5X125
1
125
4,5
225
Z-HOD-CACCIAVITI FIRMA 520-PH1 4,5X280
1
280
4,5
380
Z-HOD-CACCIAVITI FIRMA 520-PH2 6 X100
2
100
6
210
2
150
6
260
2
280
6
390
3
150
8
270
4
200
10
320
30
POZIDRIV-TIP SCREWDRIVERS
handle made of two-component, non-slip material. High resistance to shocks. DIN 5260 UNI-ISO 8764
Descrizione
PZ-N°
A mm
B mm
C mm
Z-HOD-CACCIAVITI FIRMA 530-PZ0 3 X 60
0
60
3
145
Z-HOD-CACCIAVITI FIRMA 530-PZ1 4,5X 80
1
80
4,5
180
Z-HOD-CACCIAVITI FIRMA 530-PZ1 4,5X125
1
125
4,5
225
Z-HOD-CACCIAVITI FIRMA 530-PZ2 6 X100
2
100
6
210
MIDGET TYPE FLAT-TIP SCREWDRIVERS
handle made of two-component, non-slip material. High resistance to shocks. DIN 5264 UNI 10562 ISO
2380
Descrizione
A mm
B mm
C mm
D mm
E mm
0,8
4
25
4
85
MIDGET TYPE PHILLIPS-TIP SCREWDRIVERS
handle made of two-component, non-slip material, ergonomic and patented. High resistance to shocks.
DIN 5260 UNI-ISO 8764
Descrizione
PH-N°
A mm
B mm
C mm
Z-HOD-CACCIAVITI FIRMA 541-PH1 4,5X 25
1
25
4,5
85
Z-HOD-CACCIAVITI FIRMA 541-PH2 6 X 25
2
25
6
85
FLAT-TIP SCREWDRIVERS FOR ELECTRICIANS
handle made of two-component, non-slip material. DIN 5264 UNI 10562 ISO 2380
A mm
B mm
C mm
D mm
E mm
Z-HOD-CACCIAVITI FIRMA 510 2,5X 60
Descrizione
0,4
2,5
60
2,5
145
0,5
3
80
3
165
0,5
3
100
3
185
0,8
4
125
4
215
0,8
4
150
4
240
0,8
4
250
4
340
1
5,5
150
5,5
250
31
Descrizione
A mm
B mm
C mm
D mm
E mm
1
5,5
280
5,5
380
FLAT-TIP INSULATED BLADE SCREWDRIVERS
handle made of two-component, non-slip material. DIN 5264 UNI 10562 ISO 2380
A mm
B mm
C mm
D mm
E mm
Z-HOD-CACCIAVITI FIRMA 511 2,5X 75
Descrizione
0,4
2,5
75
2,5
160
0,8
4
100
4
190
0,8
4
125
4
215
BIT HOLDER SCREWDRIVERS WITH FLEXIBLE ROD
Cellulose acetate, shape squared handle, which allows a firm and effective grip. High quality fixed carbon
steel rod, special for tools. Steel silicon elastic sheet. Used in difficult-to-reach locations and also in right
angles operations. For inserts with hex joint 1/4 “- Form C
Descrizione
Z-HOD-CACCIAVITI HF 296 ASTA FLESSIBILE
A mm
B mm
115
265
BIT HOLDER SCREWDRIVERS WITH FIXED ROD
Cellulose acetate, shape squared handle, which allows a firm and effective grip. High quality fixed carbon
steel rod, special for tools. Used in easily accessible positions where strong torsion is needed. For joints
with hex shank 1/4 “. Form C
Descrizione
Z-HOD-CACCIAVITI HF 297 PORTAINSERTI
A mm
B mm
115
210
32
SERIES OF 7 INSERTS REVOLVING BOX
Splits to facilitate the exit of the piece to use. Composition: 1 insert every of the following Ref.: HF 210/
PH1 - HF 210/PH2 - HF220/PZ1 HF 220/PZ2 - HF 200/3 - HF 200/8 1 inox magnetic bit holder. Ref. HF
290/60.
Descrizione
Z-HOD-INSERTI ASSORTITI HF 300
FLAT-TIP PHASE DETECTOR WITH CLIP
Acrilicoextrabrillante material body, envisioning LED lens. Special hardened steel blade for WS tool. IF and
CE Insulation norms. Model with clip and terminal plastic fixing LED.
Descrizione
B
C
D
E
Z-HOD-CACCIAVITI HF 485 CERCAFASE
3
65
3
140
FLAT-TIP PHASE DETECTOR LONG VERSION MOD.
Acrilicoextrabrillante material body, envisioning LED lens. Special hardened steel blade for WS tool. IF and
CE Insulation norms. Long version model with LED brass fastening block.
Descrizione
B
C
D
E
Z-HOD-CACCIAVITI HF 486 CERCAFASE
3,5
100
3,5
190
1000V INSULATED FLAT-TIP SCREWDRIVERS
Isolated in accordance with the provisions of German VDE-GS individually tested at a voltage of 10,000
Volts. Blades made of high resistance chrome vanadium steel. Induction hardened black tip. Two-component, non-slip material, ergonomic design. CEI EN 60900
Descrizione
A mm
B mm
C mm
D mm
E mm
Z-HOD-CACCIAVITI HF 500/I 2,5X 75
0,4
2,5
75
4,9
160
Z-HOD-CACCIAVITI HF 500/I 3 X 100
0,5
3
100
6,1
180
0,6
3,5
100
6,1
190
0,8
4
100
7
190
1
5,5
125
8,8
225
1,2
8
175
12,3
285
33
1000V INSULATED PHILLIPS-TIP SCREWDRIVERS
Isolated in accordance with the provisions of German VDE-GS individually tested at a voltage of 10,000
Volts. Blades made of high resistance chrome vanadium steel. Induction hardened black tip. Two-component, non-slip material, ergonomic design. CEI EN 60900
Descrizione
PH-N°
A mm
B mm
C mm
Z-HOD-CACCIAVITI HF 520/I PH0 5 X 60
0
60
5
140
1
80
7
170
2
100
10
200
INSULATED SCREWDRIVERS SET 7 PIECES
Ph philips
Descrizione
Z-HOD-CACCIAVITI SET7PZ.ISOL.1000V HF552
SCREWDRIVERS 7/11 SERIES
Ph philips
Descrizione
Z-HOD-CACCIAVITI FIRMA SERIE 7 PEZZI
Z-HOD-CACCIAVITI FIRMA SERIE 11 PEZZI
DOUBLE-FORKED SPANNERS
Chrome Vanadium steel. Thin chrome finish heads for maximum manageability. Sandblasted chrome
finish body. Great strength and reliability. DIN 3110-899 ISO 3318 UNI 6736
Size mm
L mm
C mm
Z-HOD-CHIAVI FORCHETTA HF 100 6/7
Descrizione
6x7
123
3,7
8x9
140
4
10x11
156
4,8
12x13
172
5,2
14x15
190
5,6
16x17
204
5,9
18x19
221
6,3
34
Descrizione
Size mm
L mm
C mm
20x22
237
7,1
21x23
247
7,7
24x27
263
8
25x28
279
8,5
30x32
298
9
31x33
302
6,1
12 DOUBLE-FORKED SPANNERS SET
IN CARDBOARD BOX. Composition: 1 key for each of the following measures: 6x7 - 8x9 - 10x11 - 12x13 14x15 - 16x17 - 18x19 - 20x22 - 21x23 - 24x27 - 25x28 - 30x32 mm.
Descrizione
Z-HOD-CHIAVI FORCHETTA HF 100 SET PZ.12
POLYGONAL AND FORKED COMBINATION SPANNERS
Chrome vanadium steel. Thin chrome finish heads for maximum manageability. Sandblasted chrome
finish body. Great strength and reliability. DIN 3113-899 ISO 3318 UNI 6741
Descrizione
Size mm
L mm
A mm
C mm
Z-HOD-CHIAVI COMBINATE HF 110 5,5
5,5
96
4,6
9,5
Z-HOD-CHIAVI COMBINATE HF 110 6
6
100
4,7
10,1
7
110
5
11,5
8
120
5,5
12,8
9
130
5,9
14,2
10
140
6,5
15,6
11
150
6,9
16,9
12
160
7,3
18,3
13
170
7,8
19,7
14
180
8,3
21,2
15
190
8,6
22,5
16
200
8,9
24
17
210
9,3
25,3
18
220
9,9
26,8
19
230
10,5
28,1
20
240
10,9
29,7
35
Descrizione
Size mm
L mm
A mm
C mm
21
250
11,3
31,3
22
260
11,5
32,6
23
270
11,8
34,2
24
280
12,1
35,5
25
290
12,5
36,9
26
300
12,8
38,2
27
310
13,1
39,6
28
320
13,3
40,9
29
330
13,5
42,3
30
340
13,7
43,7
32
360
14,3
46,4
34
420
20
12
38
450
21,5
13
26 POLYGONAL AND FORKED COMBINATION
SPANNERS SET
IN CARDBOARD BOX. Composition: 1 key for each of the following measures: 6-7-8-9-10-11-12-13-14-1516-17-18-19-20-21-22-23-24-25-26-27-28-29-30-32 mm
Descrizione
Z-HOD-CHIAVI COMBINATE HF 110 SET PZ.26
DOUBLE POLYGONAL SPANNERS
finish body. Great strength and reliability. DIN 838-899 ISO 3318
Descrizione
Size mm
L mm
A mm
A1 mm
Z-HOD-CHIAVI POLIG. HF 130 6/7
6x7
168
5,7
6,3
8x9
183
6,7
7
10x11
198
7,4
7,7
12x13
217
8,1
8,4
14x15
239
8,8
9,1
16x17
260
9,5
9,8
18x19
292
10,1
10,4
20x22
318
10,9
11,4
21x23
326,5
11,2
11,6
36
Descrizione
Size mm
L mm
A mm
A1 mm
24x27
329
12,4
13,4
30x32
362
14,4
15,2
8 DOUBLE POLYGONAL SPANNERS SET
finish body. Great strength and reliability.899 ISO 3318. Composition: 1 key for each of the following
measures: 6x7 - 8x9 - 10x11 - 12x13 - 14x15 - 16x17 - 18x19 - 20x22 mm.
Descrizione
Z-HOD-CHIAVI POLIG. HF 130 SET 8 PZ.
FORKED COMBINATION SPANNERS AND RATCHET
POLYGONAL SPANNERS AND RATCHET
Vanadium molybdenum chrome steel. Ideal for fast tightening without removing the key from the nut.
Polished chrome finish. DIN 3113-899 ISO 3318
Size mm
L mm
D mm
Z-HOD-CHIAVI COMBIN. C/FRIZIONE HF154 8
Descrizione
8
140
16,5
10
159
18,5
13
178
23
15
199
26,7
17
225
30,6
19
248
32,5
HEXAGONAL OPENING SOCKET WRENCHES
Satin chrome finish. Built from high-strength extruded tubing. A norme DIN 896.
Descrizione
Size mm
D mm
D1 mm
L mm
Z-HOD-CHIAVI TUBO HF 137 6X 7
6x7
11
10,2
110
Z-HOD-CHIAVI TUBO HF 137 8X 9
8x9
11
12,2
110
Z-HOD-CHIAVI TUBO HF 137 10X11
10x11
14
15
120
12x13
16
17
140
14x15
16
19
140
16x17
18
21
150
18x19
20
24
160
37
Descrizione
Size mm
D mm
D1 mm
L mm
20x22
24
27
170
30x32
32
37
210
T SPANNERS WITH HEXAGONAL OPENING
Vanadium chrome steel. Chrome plated polished head. Hexagonal opening. Sliding and removable bar.
UNI 6742 DIN 3112
Descrizione
Size mm
A mm
C mm
L mm
Z-HOD-CHIAVI BOCCA ESAG. HF 148 7
7
11,3
165
215
13
19,2
180
260
19
26,5
240
300
JOINT T SPANNERS WITH HEXAGONAL OPENING
Chrome steel vanadium. Satin chrome finish. Jointed hexagonal socket in the mouth. Universal joint with
high-resistance pins and spring clutch to allow the pre-positioning of the socket with the desired angle.
Rotation angle of 45°. Use in a fixed position at 90°. Sliding bar with safety latch. UNI 6743 ISO 2336 DIN
896
Size mm
D mm
L1 mm
L2 mm
Z-HOD-CHIAVI T SNOD.BOCCA ESAG.HF 152 6
Descrizione
6
10
97
204
7
11
97
204
8
13
98
204
9
14
98
204
10
16
497
204
11
17
497
204
12
18
497
203
13
18
497
203
14
20
497
204
15
22
497
204
16
22
497
204
17
24
497
204
18
26
497
204
19
27
496
203
20
28
497
204
21
28
497
204
22
30
497
204
24
32
502
203
38
HEXAGON SPANNERS WITH HANDLE
Deep hexagonal spanner to operate on the protruding screws. Ergonomic two-component handle. Body
in chrome vanadium steel. Satin chrome finish.
Hex. mm
B mm
A mm
C mm
L mm
Z-HOD-CHIAVI BOCCA ESAG.C/IMP.HF565 4
Descrizione
4
125
7
20
235
5
125
8,8
30
235
Z-HOD-CHIAVI BOCCA ESAG.C/IMP.HF565 5,5
5,5
125
8,8
30
235
6
125
9,4
35
235
7
125
11
35
235
8
125
12
50
245
9
125
13,3
50
245
10
125
14,4
50
245
12
125
17
50
245
13
125
18,5
55
245
RATCHET WRENCHES 1/2”
Reversible ratchet with quick release square coupling. Body in chrome vanadium steel. Non-slip ergonomic grip. Blasted satin finish. DIN 3120 - 3122.
Descrizione
Z-HOD-CRICCHETTO HF 331 1/2”
Lenght mm:
240
RATCHET WRENCHES 3/4”
Reversible ratchet with quick release square coupling. Body in chrome vanadium steel. Non-slip ergonomic grip. Blasted satin finish DIN 3120 - 3122.
Descrizione
Z-HOD-CRICCHETTO HF1710 3/4”
Lenght mm:
500
39
HEXAGONAL SPANNERS 1/2”
Chromium molybdenum vanadium steel with professional phosphate finish. Groove and lock hole on the
square joint. Subjected to strict tests at all stages of the process to ensure the highest quality and finish
all the parts produced. High resistance to twisting and FLANK DRIVE new concept profile, guaranteeing
a perfect contact surface between sleeve and nut to be tightened, allows to have a greater power in the
clamping and an increase of the duration of both the tool and the dice DIN 3120 - 3124
Descrizione
mm
Ø Q mm
Ø H mm
W mm
L mm
Z-HOD-CHIAVI BUSS.ESAG.HF 330 1/2” 10
10
15
21,8
10
38
11
16
21,8
10
38
12
17,5
21,8
10
38
13
19
21,8
10
38
14
20
21,8
10
38
15
21,6
21,8
10
38
16
21,8
23,1
10
38
17
23,8
22
10
38
18
25,4
23
12
38
19
25,8
23
12
38
20
27,8
24
12
38
21
27,8
24
12
38
22
29,8
26
16
40
23
31,6
28
16
40
24
31,8
28
16
40
26
33,8
30
16
40
27
35,8
30
22
42
28
37,8
32
22
42
30
39,8
34
22
42
32
41,8
36
22
45
IMPACT HEXAGONAL SPANNERS DA 1/2”
clamping and an increase of the duration of both the tool and the dice. DIN 3129 - 3121
Size mm
A mm
C mm
B mm
L mm
Z-HOD-CHIAVI BUSS.ESAG.HF1600 1/2” 8
Descrizione
8
15
7
25
38
9
16
7
25
38
10
17,5
7
25
38
11
18,5
8
25
38
12
19,5
9
25
38
40
Descrizione
Size mm
A mm
C mm
B mm
L mm
13
20,5
10
25
38
14
22
10
25
38
15
23,5
11
30
38
16
24,5
11
30
38
17
26
12
30
38
18
27
13
30
38
19
28
13
30
38
20
29
13
30
38
21
30
14
30
38
22
31,8
14
30
38
23
33,8
14
30
41
24
33,8
14
30
41
25
35,8
14
30
41
26
37,8
15
30
41
27
37,8
16
30
41
28
40,8
17
30
41
29
41,8
17
30
41
30
42,5
17
30
41
32
44,5
17
30
41
HEXAGONAL SPANNERS SET
Descrizione
N. pieces per pack
Z-HOD-CHIAVI BUSS.ESAG.HF 350 1/2” SET
19
Z-HOD-CHIAVI BUSS.ESAG.HF 351 1/2” SET
25
41
HEXAGONAL SOCKET SPANNERS 3/4”
clamping and an increase of the duration of both the tool and the nuts. DIN 3120 - 3122
Descrizione
Size mm
B mm
A mm
L mm
C mm
22
36
32
50
14
24
36
34
50
16
27
36
38
52
18
28
38
40
52
18
30
38
42
54
20
32
38
44
56
22
36
42
50
58
25
38
45
52
60
25
41
45
56
64
28
46
47
62
68
31
2 HEX HEADED T SPANNERS WITH HANDLE
T Ergonomic handle in impact-resistant polypropylene. Blade: chrome molybdenum CV satin steel.
Hardness: 50-55 HRC
Descrizione
Hex. size mm
A mm
C mm
B mm
L mm
Z-HOD-CHIAVI MASCHIO ES.C/IMP.HF405/ 2,5
2,5
125
46
15
155
Z-HOD-CHIAVI MASCHIO ES.C/IMP.HF405/ 3
3
125
46
15
155
3,5
125
46
15
155
4
125
46
15
155
4,5
150
68
20
188
5
150
68
20
188
6
150
68
20
188
7
175
88
25
223
8
175
88
25
223
Z-HOD-CHIAVI MASCHIO ES.C/IMP.HF405/10
10
200
88
25
248
42
HEX. THREE-HEADED T SPANNERS WITH HANDLE
Highly resistant chrome vanadium steel. Hardness of 52 HRC. Satin chrome finish. Sliding rod ideal for
clamping screws in deep holes. End burnished up to 6 mm to guarantee maximum accuracy (essential in
small sizes).
Descrizione
mm
ØD mm
L mm
L1 mm
Z-HOD-CHIAVI T TESTA ESAG. HF 395 2
2
4
125
65
Z-HOD-CHIAVI T TESTA ESAG. HF 395 2,5
2,5
4
125
65
3
4
125
65
3,5
4
125
65
4
6
180
85
4,5
6
180
85
5
6
180
75
6
8
210
100
8
10
242
105
10
12
300
165
12
14
315
160
14
16
340
165
MALE BENT HEXAGONAL WRENCHES SET OF 9
PCS
Set of 9 hex keys bent. Made of chrome vanadium. Perfect angle. Caulked heads flatbed blunt for a complete internal insertion in the impression and the achievement of a high value of torque. Burnished finish.
With metal ring. UNI 6753 ISO 2936 DIN 911. Packed in blister. Sizes: 1,5 - 2 - 2,5 - 3 - 4 - 5 - 6 - 8 - 10 mm.
Descrizione
Z-HOD-CHIAVI ESAG.HF911-CV-BOX-210 SET
MALE BENT HEX. WRENCHES WITH ONE SPHEROIDAL END SET OF 9 PCS
Model of wrenches at one end spheroidal. It can operate with an inclination of 25°. Body in chrome
vanadium steel with caulked heads. Satin finish. With hanging support clips in plastic. Packed in blister.
Composition: 1 wrench for each of the following sizes: 1,5 - 2 - 2,5 - 3 - 4 - 5 - 6 - 8 - 10 mm.
Descrizione
Z-HOD-CHIAVI ESAG.HF380 PUNTA SFERA SET
43
ROLLING ADJUSTABLE SPANNERS
Differentiated total hardening. Hardness between 40 and 50 HRC. Made of chrome vanadium steel AISI
6140. Precision wrenches with scale. Perfectly smooth, backlash-free lower jaw in the specific milling.
Pronounced and rounded handle nervations for a comfortable and secure grip. Head tilted 22.5 degrees.
Chromed, satined, non-reflective finish. DIN 3117
L
A Max
Z-HOD-CHIAVI RULLINO HF 1040 MM.100
Descrizione
4” - 100 mm
1/2” - 13 mm
6” - 150 mm
3/4” - 19 mm
8” - 200 mm
15/16” - 24 mm
10” - 250 mm
1-3/16” - 30 mm
12” - 300 mm
1-3/8” - 34 mm
15” - 375 mm
1-3/4” - 44 mm
DYNAMOMETRIC WRENCHES
Snap-in model with great precision. Easy-to-read scale with methacrylate protection. Use for right-handed and left-handed tightenings. Selected pair locking ferrule. Comfortable impact-resistant plastic grip.
ISO 6789
Descrizione
Joint inches
Capacity Nm
Z-HOD-CHIAVI DINAMOM. HF9010 NM 20-100
3/8”
20-100
Z-HOD-CHIAVI DINAMOM. HF9010 NM 40-200
1/2”
40-200
TWO-JAWS FORGED STEEL EXTRACTOR
Two-jaw extractor for outdoor and indoor, sliding jaws along the crossbaeam. The seal is made with bolts
of the jaws zinc chromed.
Descrizione
Z-HOD-ESTRATTORE HF 8030 MM. 80
Z-HOD-ESTRATTORE HF 8030 MM.130
44
ELECTRICIAN SCISSORS
Hinged overlapped models with an adjusting screw. Groove thread-cutter blades in high-carbon hot forged and hardened steel. Hardness of 52 HRC. PVC insulated handles. HEAVY MODEL with finely serrated
blade.
Descrizione
L1 mm
L mm
A mm
B mm
Blade
Z-HOD-FORBICI HF 1010/LC
45
145
17
10
Bent
Z-HOD-FORBICI HF 1010/LD
45
145
17
8
Straight
PROFESSIONAL OLFA SCISSORS
Stainless steel blades with non-slip toothing for precision cutting with minimal effort. ABS handles that
combine lightness and maneuverability at full strength. Ambidextrous use. Ideal both at home and for a
professional use.
Descrizione
Lenght mm
Z-HOD-FORBICI OLFA SCS 1
141
Z-HOD-FORBICI OLFA SCS 2
175
OLFA CUTTERS
For specific uses, lightduty uses, heavy-duty EXL uses, heavy duty BN-L uses, heavy duty L1 uses, accident
prevention, extra heavy H-1 uses.
Descrizione
Lenght mm
Z-HOD-COLTELLO OLFA HOK 1
174
LIGHT-DUTY OLFA CUTTERS
For specific uses, light-duty uses, heavy-duty EXL uses, heavy duty BN-L uses, heavy duty L1 uses, accident
Blade mm
Lenght mm
Z-HOD-COLTELLO OLFA 180
Descrizione
9
140
Z-HOD-COLTELLO OLFA 180/B
9
149
45
EXL HEAVY-DUTY OLFA CUTTERS
Descrizione
Z-HOD-COLTELLO OLFA EXL
Blade mm
Lenght mm
18
164
BN-L HEAVY-DUTY OLFA CUTTERS
prevention, extra heavy H-1uses.
Descrizione
Z-HOD-COLTELLO OLFA BN-L
Blade mm
Lenght mm
18
160
L1 HEAVY-DUTY OLFA CUTTERS
Descrizione
Z-HOD-COLTELLO OLFA L1
Blade mm
Lenght mm
18
140
SAFETY OLFA CUTTERS
Descrizione
Z-HOD-COLTELLO OLFA SK 4
Blade mm
Lenght mm
18
142
46
H-1 HEAVY-DUTY OLFA CUTTERS
Descrizione
Z-HOD-COLTELLO OLFA H-1
Blade mm
Lenght mm
25
173
CARPET LAYERS CUTTER
Solid cast aluminium body, lightweight and durable handle, screw thread, built in metal carpet tucker.
Descrizione
Z-COLTELLO CARPET LAMA BIM.18 MM IR
SELF-RETRACTING KNIFE
A TUV certified safety knife featuring a spring return shuttle to minimise risk of injury, two position selfretracting mechanism for extra safe handling, captive screw prevents loss during blade change, includes
one shatterproof Bi-metal Blue Safety blade, internal blade storage for up to 5 blades.
Descrizione
Z-COLTELLO ANTINFORTUNISTICA
IR
CARBON STEEL HOOKED BLADES
Descrizione
Z-LAMA DI RICAMBIO AD UNCINO
47
AB 10 NARROW PARTITIONED OLFA BLADES
With 12 parts 5 mm each. For narrow blade cutters (9mm): 180 - S - A - A3 - 300 - SILVER - PA-2. In plastic
case with 10 blades.
Descrizione
Z-HOD-LAME OLFA REF. AB 10 CONF.10 PZ
Lenght mm
Height mm
Thickness mm
80
9
0,38
LB 10 LARGE PARTITIONED OLFA BLADES
With 7 parts 10 mm each. For large blade cutters (18 mm): PL-1 - LL - L-1 - L-2 - OL - FL - L3 - EXL - BN-AL BN-L - NL-AL - SL-1 - ML - L5-AL - CL - NOL-1. In plastic case with 10 blades.
Descrizione
Z-HOD-LAME OLFA REF. LB 10 CONF.10 PZ
Lenght mm
Height mm
Thickness mm
100
18
0,5
HEAVY-DUTY PARTITIONED OLFA BLADES
With 6 parts. For 25 mm blade cutters: 25 mm: H-1 - NH-1. In plastic case with 5 blades.
Descrizione
Z-HOD-LAME OLFA REF. HB 5B CONF. 5 PZ
Lenght mm
Height mm
Thickness mm
126
25
0,7
BLADES HOLDER
For all Olfa blades models. Essential for the safety of the operators and protection of the environment.
ABS body. Stainless steel top plate. Locking ring made of steel.
Descrizione
Z-HOD-PORTALAME DC 2
48
MANUAL SEAMER
Arrow hammer manual seamer. Ideal for intensive use, reduces fatigue caused by the continuous use.
Patented anti jamming system - high power. Recommended for buildings and industry for the installation
of insulation materials and vibration dampers for nailing crates and for fixings on wood. Unbreakable
non-slip grip balanced handle. Chromed. 170 stitchers charger.
Descrizione
Z-HOD-AGGRAFFATRICE MANUALE T 50
SEAMER STITCHERS
5000 pieces pack.
Descrizione
Z-HOD-AGGRAF.PUNTI X T50 1/2”
RIVETER
Descrizione
Z-HOD-RIVETTATRICE MANUALE HF 1140
Z-HOD-RIVETTATRICE MANUALE HF 1141 GIREV
RIVETS
500 pieces pack.
Descrizione
Z-RIVETTI ALL/CH.ACC.ZIN.MAGG. 4,8X10X16
Z-RIVETTI ALL/CHIODO ACC.ZIN. D.3 X 8
49
Descrizione
Z-RIVETTI ALL/CHIODO ACC.ZIN. D.3,4X 7
AUTOMATIC WIRE STRIPPER
Capacity from 0.6 to 6 mm2. Automatic Model with thread cutting system. Application: electrical and
electronic field and production lines.
Descrizione
Z-HOD-SPELAFILI HF 980
Lenght mm
For wires max mm2
165
0,6-6
TRACTION WIRE STRIPPER
For cables Ø 4 - Ø 28 mm. Application: electrical and electronic field and production lines.
Descrizione
Z-HOD-SPELAFILI HF 997
Capacity Ø mm
4_28
50
CABLE LUGS PLIERS
For insulated cable lugs from 0.5 to 6 mm2. ABS handles. Burnished finish. Mobile clamps. Adjustable
clamping.
Descrizione
Lenght mm
Z-HOD-PINZA CAPICORDA HF 730
229
Z-HOD-PINZA CAPICORDA HF 734
227
CURVED JAW LOCKING PLIERS
Self-energising lower jaw provides three times more gripping power, with no slipping or stripping on any
style nut or bolt head. Unique curved jaw CR, built strong to last long, hex key adjusting screw, self-energising lowe jaw, guarded realease.
Descrizione
Z-PINZA GRIP 034 MM.125
GENTLE MUNCH FLAT BLADE
Produced with advanced technological processes and high-strength steels. Hardened in controlled atmosphere. Hardness: HRC 64 ÷ 66.
Descrizione
Z-HOD-LIME PIATTE 6” D
Inches
MANICATE
6”
WOOD ROUND 1/2 GENTLE HANDLE RASP
Produced with advanced technological processes and high-strength steels. Hardened in controlled atmosphere. Hardness: 64-66 HRC
Descrizione
Z-HOD-RASPA TONDA 1/2 DOLCE MANICATA 10”
Inches
10”
51
TIRE LEVER
Forged pattern with lateral ribs. Maximum strength and reduced weight. Satin chrome finish. Hardness
30/40 HRC.
Descrizione
Lenght mm
Z-HOD-LEVAGOMME HF 75 MM.300
300
400
500
DEBOUNCING MALLETS
The thin grit contained within the head creates an inertia which prevents the rebound. Essential for finishing and accuracy works. Head in high strength steel. Rilsan interchangeable inserts. Shaped ash handle
with waxed finish. Handle fixed to the head with a cylindrical metal insert for maximum resistance.
D mm
L mm
Z-HOD-MAZZUOLA ANTIRIMBALZO HF 1137/30
Descrizione
30
330
35
330
40
335
45
335
50
350
60
360
POLYURETHANE MALLETS
Polyurethane interchangeable knockers. High-resistance to flaking knockers. Steel head. Shaped handle
in polished beech wood. To be used on machined surfaces. Applications: machine shops, plant engineering, mechanical parts assembly, maintenance. DIN 7784.
Descrizione
D mm
L mm
Z-HOD-MAZZUOLA POLIURETANO HF 1138/22
22
130
28
250
35
400
45
710
60
1450
52
RIBBED CHISELS
Splinter-resistant chrome silicon manganese nickel steel. Self-hardening. Re-sharpening. Chrome finish.
Descrizione
A mm
B mm
L mm
Z-HOD-SCALPELLO HF 1221/150
20
11
150
26
13
200
30
15
250
36
18
300
HEXAGONAL BODY CHISELS
Chrome vanadium steel body. Chrome finish.
Descrizione
Z-HOD-SCALPELLO HF 453 CVC
L mm
Hex. mm
150
12
REPORTED TIP COTTER TOOL
High quality chrome vanadium, molybdenum special steel. Defferently hardened body, chrome-burnished tip. Hardness on tip HRC 57-6. Handle found (prevents chipping during use). Handle Hardness 36-44
HRC. ISO and DIN standards.
Descrizione
L mm
Hex. mm
Tip diameter mm
Z-HOD-CACCIACOPPIGLIE HF 531/2 CVC
145
8
2
160
8
3
185
10
4
200
10
5
210
12
6
215
12
8
230
14
10
53
RECTIFIED HOLE SAWS
In HSS with a hardness of 64 HRC. Fully adjusted with side cutting chipbreaker. It is particularly suitable for the drilling of metal sheets in general, such as iron and light alloys, plastics, steels with a tensile
strength up to R: 800 N/mm2. Height 23mm cutter. Drilling depth up to 8 mm. High efficiency and high
precision drilling. It’s advisable to use the drills lubricating, where possible, with cutting oil or emulsion.
From Ø 12 to Ø 14: SPINDLE d = 8mm. From Ø 15 to Ø 50: SPINDLE d = 10mm. From Ø 51 to Ø 120:
SPINDLE d = 13mm.
Descrizione
Z-HOD-FRESA TAZZA IN HSS MM 10
BI-METAL HOLE SAWS
HSS M3 toothing and stainless steel casing. Max drilling depth = 10 MM - Useful depth of cut = 30 mm.
Maxime resistance to impact and tearing thanks to the laser welding between toothing and body. Recommended for quick cuts and perfect on: common stainless steels and cast iron, ferrous and non-ferrous
metals, wood compact even with the presence of nails materials, plywood and plastics. It is suggested to
carefully follow the recommended cutting speeds. Individually packed.
Descrizione
Ø Inches
Z-HOD-SEGA A TAZZA BIMETALL. HPU650 14
9/16”
5/8”
11/16”
3/4”
13/16”
7/8”
15/16”
54
Descrizione
Ø Inches
1”
1-1/16”
1-1/8”
1-3/16”
1-1/4”
1-5/16”
1-3/8”
1-1/2”
1-9/16”
1-5/8”
1-3/4”
1-13/16”
1-7/8”
2”
2-1/16”
2-1/8”
2-1/4”
2-3/8”
2-1/2”
2-3/4”
2-7/8”
3”
3-1/4”
3-3/8”
3-1/2”
3-5/8”
3-3/4”
3-7/8”
4”
4-1/4”
4-3/8”
4-1/2”
4-3/4”
55
HAND TAPS FINISHER IN ISO METRIC THREAD
In HSS. Pack of 3 pieces. DIN 352 standard. Metric ISO thread - large step. Suitable for threading through
and blind holes, structural steel, quenched and tempered steels and metal materials in general with a
tensile strength of up to R 600 N/mm2. It is recommended the use of taps lubricating, where possible,
with cutting oil or emulsion.
Descrizione
Z-MASCHIO MANO 3PZ. ACC M 3 X 0,5
Z-MASCHIO MANO 3PZ. ACC M 4X 0,7
Z-MASCHIO MANO 3PZ. ACC M 5X 0,8
Z-MASCHIO MANO 3PZ. ACC M 6X1
Z-MASCHIO MANO 3PZ. ACC M 8X1,25
Z-MASCHIO MANO 3PZ. ACC M10X1,5
Z-MASCHIO MANO 3PZ. ACC M12X1,75
Z-MASCHIO MANO 3PZ. ACC M14X2
Z-MASCHIO MANO 3PZ. ACC M16X2
HAND TAPS IN SETS OF 2 PIPE THREAD PIECES
In HSS. UNI 338 - DIN 5157 standards. In series 2 pieces: sketcher and finisher. Gas thread. Suitable for
threading through and blind holes, structural steel, quenched and tempered steels and metal materials in
general with a tensile strength of up to R 600 N/mm2. It is recommended the use of the taps lubricating,
where possible, with cutting oil or emulsion.
Descrizione
Z-MASCHIO MANO 2PZ. ACC G 1/8
ISO METRIC THREADS MACHINE TAPS
In cobalt HSS. DIN 371/B standards. Reinforced shank. Metric ISO thread - large step - straight flutes,
proper opening. For through holes in steel, cast iron and metal materials in general with a tensile strength
up to R: 900 N/mm2. It is recommended the use of taps lubricating, where possible, with cutting oil or
emulsion. Individual 1 piece packing in plastic.
Descrizione
Ø x Pitch
L tot mm
L thread mm
Z-HOD-MASCHI MAC.PASSO G.HPU 410 M 3X0,5
M3 x 0,5
56
11
Z-HOD-MASCHI MAC.PASSO G.HPU410 M 4X0,7
M4 x 0,7
63
13
M5 x 0,8
70
16
Z-HOD-MASCHI MAC.PASSO G.HPU410 M 6X1
M6 x 1
80
19
M8 x 1,25
90
22
56
Descrizione
Ø x Pitch
L tot mm
L thread mm
M10 x 1,5
100
24
ROUND DIES
In HSS. In accordance with DIN 223 - EN 22568. Entrance properly guided. Metric ISO thread - large pitch Tolerance 6g. It’s advisable to use lubricating chains, where possible, with cutting oil or emulsion.
Descrizione
Z-FILIERE TONDE M 3X0,5 D.25,4
Z-FILIERE TONDE M 6X1 D.25,4
ROUND DIES G
Descrizione
Z-FILIERE TONDE G 1/4 D.38,1
DIE HOLDER
Descrizione
Z-PORTA FILIERE MANO UITA D.20,6 .6.170
Z-PORTA FILIERE MANO UITA D.25,4 .6.171
Z-PORTA FILIERE MANO UITA D.30 6.17.6
Z-PORTA FILIERE MANO UITA D.38,1 6.17.2
57
TAP WRENCHES
Descrizione
Z-GIRAMASCHI UITA N°0 MM130
TOOLHOLDER
Descrizione
Z-PORTA UTENSILI UNIV.UITA MM. 80 6.16.1
Z-PORTA UTENSILI UNIV.UITA MM. 90 6.16.2
Z-PORTA UTENSILI UNIV.UITA MM.100 6.16.3
Z-PORTA UTENSILI UNIV.UITA MM.150 6.16A1
Z-PORTA UTENSILI UNIV.UITA MM.150 6.16A2
58
TOOL BAGS AND BOXES TOOLS HOLDER TROUSSE
Empty tools holder bag for belts. In high-strength waterproof nylon. Attachment rotating clip that facilitates any movement.
Descrizione
Size mm
Z-HOD-TROUSSE UTENSILI HF 175 VUOTA
120 x 220
TOOLBAG FOR ELECTRICIANS
Entirely in reinforced leather. Black color. Transport belt and tool holder loops inside.
Descrizione
Size mm
Z-HOD-BORSA PORTATTREZ.X ELETTRIC.135/35
350 x 180 x 220
400 x 120 x 250
450 x 120 x 250
TOOLBAG FOR HYDRAULICS
Entirely in reinforced leather. Black color. Transport belt and tool holder loops inside. Steel corner protection and reinforcement studs.
Descrizione
Z-HOD-BORSA PORTATTREZ.X IDRAULIC.122/55
Size mm
550 x 180 x 180
TOOLBAG WITH HANDLE FOR HYDRAULICS
Entirely in reinforced leather. Black color. Transport belt and tool holder loops inside. Steel corner protection and reinforcement studs. With handle.
Descrizione
Z-HOD-BORSA PORTATTREZ.X IDRAULIC.123/42
Size mm
420 x 180 x 270
59
EMPTY METAL TOOLBOX
Professional model with 5 drawers with pantograph opening. Increased high-strength rivets. Reclining
handles in sideways, in hose Ø 12 mm, thickness 2 mm. Lids with safety lock and padlock. High-resistance
welding realized in controlled atmosphere. Electrostatic painting.
Descrizione
Size mm:
Z-HOD-CASSETTA PORTAUTENSILI HF 4000/5
455 x 202
530 x 202
METAL TOOLBOX WITH TOOLS FOR MECHANICS
Professional model with 5 drawers with pantograph opening. Complete with 38 pieces for mechanical
(HF 4005/1) and 35 pieces for electricians (HF 4005/2). Increased high-strength rivets. Reclining handles in
sideways, Ø 12 mm, thickness 2 mm. Lids with safety lock and padlock. High resistance welding realized
in controlled atmosphere. Electrostatic painting.
Descrizione
EMPTY PLASTIC TOOLBOX
Toolbox made of polypropylene. Removable tray. Metal latches. Ergonomic handles covered with rubber.
Descrizione
Size cm:
Z-HOD-CASSETTA PORTAUTENSILI HF 4200
40x21x17,57
Z-HOD-CASSETTA PORTAUTENSILI HF 4205
50x25x26
PROFESSIONAL ABS TOOL STORAGE CASE
Professional ABS tool storage case. Document storage pocket with small pockets, 2 tool panels with
elastics or pockets, thermoformed bottom with modular compartments and 2 small parts organizers, ABS
satin-finish handle with soft, ergonomic, non-slip grip, steel latches with key.
Descrizione
Z-VALIGIA ASS.TECN. PC600E
1
60
PROFESSIONAL ABS TOOL TROLLEY
Professional ABS tool trolley. Document storage pocket with small pockets, 2 tool panels with elastics,
thermoformed polystyrene bottom with modular compartments and 2 small parts organizers, ABS satinfinish handle with soft, ergonomic, non-slip grip, light alloy wheels with ball bearings and rubber tread,
steel latches with key.
Descrizione
Z-VALIGIA ASS.TECN. PC620E
1
PROFESSIONAL TOOL BAG
Professional tool storage case. Document storage compartment, 2 tool storage panels with elastics, one is
removable, handle with soft, ergonomic, non-slip grip, adjustable shoulder strap, padlock option.
Descrizione
Z-VALIGIA ASSIS.TECNICA 48X40X17 19”
UTILITY ORGANIZER
Utility organizer with built in handle and transparent cover. Double angular lock, number of compartments: from 7 to 47.
Descrizione
Z-CASSETTA PLAST.PORTAMIN.37X30X6,3 523
SMALL PARTS SUITCASES
Plate sheet 8/10 small parts holder, latch with nylon ratchet, steel hinge, powder coating with textured
epoxy.
Descrizione
Size mm:
Z-VALIGIA PORTAMINUT/12P 325X 250XH. 70
325x250x70h
Z-VALIGIA PORTAMINUT/18P 485X 250XH. 70
485x250x70h
Z-VALIGIA PORTAMINUT/33P 470X 315XH.105
470x315x105h
Z-VALIGIA PORTAMINUT/36P 450X 250XH.115
450x250x115h
61
ORGANIZER
15 removable trays for small parts: 5 large, 10 standard. Metal handle and closures, compartment for long
tools.
Descrizione
Z-VALIGETTA PORTAMINUT.PP 42X37,2X 7 16”
SMALL PARTS ORGANIZER
Organiser. 8 removable trays for small parts: 6 large, 2 extra large, metal handle and latches, compartment
for long tools, extra deep.
Descrizione
Z-VALIGETTA PORTAMINUT.PP 42X37,2X10 16”
Small parts organizer in transparent polypropylene. Number of compartments: 12.
Descrizione
Small parts organizer in transparent polypropylene. Number of compartments: 18.
Descrizione
62
SMALL PARTS ORGANIZER WITH COLORED
LATCHES
Small parts organizer with handle in transparent polypropylene. New resistant coloured latches. Number
of modular compartments: from 4 to 24.
Descrizione
SMALL PARTS CANTILEVER
Tool/parts-holder cantilever. 18 removable trays: 6 large, 12 standard, metal closures, heavy duty long
handle in metal, non-slip and shockproof rubber feet.
Descrizione
Z-VALIGETTA PORTAMINUT.PP 45X25X14,5 18”
TOOL HOLDER SUITCASE
Sober and clean suitcase, made of satin silver anodized aluminum and scratch-resistant bush hammered.
Anodized brushed aluminum profiles and angulars, protective abs corners printed in silver or black color.
Excellent resistance, appealing lightness and appreciated aesthetic result. External length 440 mm. External depth 350 mm. Inner length 420 mm. Internal depth 325 mm.
Descrizione
Ext. height mm:
Int. height mm:
Weight kg:
Z-VALIGIA PORTAUTENSILI
197/ST
140
120
4,5
Z-VALIGIA PORTAUTENSILI
198/ST
170
150
5,6
LIGHT TYPE METAL TRUNKS
Trunk with handles on the sides for an easy grip, central locking with padlock, internal hinges and linkages to lock the lid. Made of plate sheet 8/10.
Descrizione
Size mm:
Weight kg:
Z-VALIGIA BAULE MET.TR/1 700X 400XH.350
700x400x350
10
Z-VALIGIA BAULE MET.TR/5 1100X 400XH.400
1100x400x400h
14
63
HEAVY METAL TRUNKS
Toolbox with inclined lid.
Descrizione
Z-VALIGIA BAULE VH9035 CM 1800X600XH.600
Available size mm:
Size mm:
Weight kg:
1670x800x650
1730x830x660
119
EMPTY COMPARTMENT METAL BOXES
Empty compartment container, nylon ratchet closure with textured epoxy powder coating.
Descrizione
Size mm:
Z-VALIGIA CONTENITORE/023 355X 185XH.120
355x185x120h
Z-VALIGIA CONTENITORE/027 600X 270XH.220
600x270x220h
DISCOVER CARGO TOOLBOX IN PP
Cargo toolbox with wheels. Double opening system with lid removal option, featuring wheels and handle
for transport, padlock option.
Descrizione
Z-BAULE PP DISCOVER 81X42X38 32”
PLASTIC TOOLBOX
Toolbox. Built-in organizer tote, number of modular compartments: from 6 to 14, padlock option.
Descrizione
Z-CASSETTA PLAST.PORTAUT. 44X26X26 911
64
PP TOOLBOX
Toolbox. Metal closures, spacious lower compartment for tools, tote tray, ergonomic soft-grip, non-slip
handle, padlock option.
Descrizione
Z-CASSETTA PP PORTAUTENSILI 42X23X23 16”
PP TOOLBOX
Toolbox. Metal latches, deep lower compartment for tools, tote tray suitable for carrying power screwdrivers and/or small parts organiser, convenient side grips for carrying by two persons, ergonomic soft-grip,
non-slip handle, padlock option.
Descrizione
PP TOOLBOX
Toolbox. Quick latch tool box, handle with non-slip grip, internal tote tray, padlock option.
Descrizione
TOOLBOX
Toolbox. Metal latches, spacious lower compartment for tools, tote tray, ergonomic soft-grip, non-slip
handle, padlock option.
Descrizione
65
TOOLBAG 556 TX
Tool pocket with elastic bands for small precision tools. Inner padded anti-shock pocket for delicate tools,
2 pockets with zip, multiple carriage system: handle, shoulder strap and loop for belt.
Descrizione
Z-BORSA PORTAUTENSILI 556 TX
TECHNICS TOOLHOLDER BELT
Belt in reinforced material. Adjustable waist size from 90 to 120 cm, quick release.
Descrizione
Z-CINTURA PORTAUTENSILI TECHNICS
DRILL HOLSTER
Holster for cordless drill. Special reinforced material, pockets for bits and accessories, fit for technics belt.
Descrizione
Z-CINTURA-FONDINA PORTATRAPANO TECHNICS
ELECTRICIAN’S TOOL POUCH
Electrician’s tool pouch in special reinforced material. Elasticated loop for tools, insulating-tape holder, fit
for technics belt.
Descrizione
Z-CINTURA-TASCA X ELETTRICISTA TECHNICS
66
TECHNICS NAIL POCKET
Nail pocket in special reinforced material. Double fabric and special shape to prevent holes, high capacity,
fit for technics belt.
Descrizione
Z-CINTURA-TASCA PORTACHIODI TECHNICS
TECHNICS HAMMER HOLDER
‘Snap-In’ hammer holder. Swinging sling, metal holder-fits all hammers, comfort padding, fit for technics
belt.
Descrizione
Z-CINTURA-PORTAMARTELLO TECHNICS
TECHNICS TOOL BUMBAG
Tool bumbag with handle. Special reinforced material, adjustable waist belt, document compartment
inside flap, inner and outer pockets.
Descrizione
Z-MARSUPIO PORTAUTENSILI TECHNICS
PROFESSIONAL TOOLBAG TECHNICS
Professional tool bag. Water-resistant material, ripstop fabric, organisers compartments, padlock option,
tool holding system, pocket for document, opening on both sides.
Descrizione
Z-BORSA PORTAUTENSILI PROF.TECHNICS
67
METAL CABINET FOR SMALL OBJECTS
Shelf for small objects. Made of high-grade steel sheet thickness 8/10 molded and cold shaped. The doors
are lockable with key. Drawers can be made of sheet metal or plastic, fitted with 2 movable dividers and
a white card label with transparent protective PVC. Baked epoxy painting (after phosphodegreasing
treatment). Color: shelves and drawers: made of metale sheet, gray RAL 7038, drawers can be made of
plastic, green or transparent. Dimensions mm 900 x 355 x 2000, drawers n. 114 size drawers mm 130 x 300
x 70.
Descrizione
Z-ARMADI PORTAMINUTERIE CASS.114 E222
Size mm:
Drawers n.
Drawers size mm:
900x355x2000h
114
130x300x70h
68
ELECTRIC TOOLS AND ACCESSORIES GRINDING MACHINE GWS 22-230 H
Angle grinder. Ball bearing with double seal and particularly robust gears. Motor windings protected
from the aggressive sanding dust. Safety switch Tricontrol. Protective cap, mounting flange, clamping
nut, double hole wrench, extra grip. Size disc 230 mm. Spindle thread M14. European plug Type 2 pin CEE
7/16. No-load speed r/min 6500.
Descrizione
Z-BOSCH-SMERIGL.GWS 22-230 H 0601882M03
Power W:
Voltage V:
2200
230
GRINDING MACHINE GWS 660-115
Angle grinder. Grippy and powerful grip small diameter to work safely with just one hand. Power of 660
W and low weight of only 1.4 kg. Flat gear head. Axial coding of the protective guard. • Spindle lock for an
easy disc replacement. • Safety switch • Disarming brushes.• Auxiliary handle applicable on the left and on
the right. • Protectes motor winding. • Grinding cover with axial safe. Diameter size for rough grinding and
cutting mm: 115. Rubber pad diameter mm: 115. Cup brushes diameter mm: 70.
Descrizione
N. R/min w/o
load:
Z-BOSCH-SMERIGL.GWS 660-115 060137506D
11000
Absorbed power
Threaded joint:
W:
660
Weight kg:
M 14
1,4
CUTTING DISCS TYPE A
For steel and stainless steel. 25 pieces pack.
Descrizione
Ø mm
Thickness mm
Hole mm
Z-DISCO TAGLIO TIPO A 115X1
115
1
22,2
Z-DISCO TAGLIO TIPO A 115X1,6
115
1,6
22,2
115
3,2
22,2
125
3
22,2
230
2
22,2
230
3,2
22,2
69
CUTTING DISCS TYPE C
For stone and cast iron. 25 pieces pack.
Descrizione
Z-DISCO TAGLIO TIPO C 115X3
Z-DISCO TAGLIO TIPO C 230X3,2
CUTTING DISCS INOX TYPE
Grinding wheels reinforced in the center plane for cutting with portable machines. Stainless steel and
high-strength steels. Packs of 25 pcs.
Descrizione
Z-DISCO TAGLIO TIPO INOX 115X1,6
Ø mm
Thickness mm
Hole mm
115
1,6
22,2
FLAP DISCS WITH GLASS FIBRE SUPPORT
Suitable for mild steel and low alloy
Ø mm
Hole mm
Grain
Z-DISCO LAMELLARI CORIN.115 GR. 40 NY
Descrizione
115
22,2
40
115
22,2
60
115
22,2
80
Z-DISCO LAMELLARI CORIN.115 GR.120 NY
115
22,2
120
OFF-WHEELS DISCS TYPE A
Reinforced depressed center grinding wheels for grinding with portable machines. Steel, ferrous materials, various steels, welding
Descrizione
Z-DISCO SBAVO TIPO A 115X6,4
70
OFF-WHEELS DISCS TYPE C
For steel, ferrous materials, various steels, welding.
Descrizione
Z-DISCO SBAVO TIPO C 115X6,4
DIAMOND DISCS
Suitable for concrete, reinforced concrete, brick, bricks, granite, natural stone and plastic.
Max rpm
Size
Z-DISCO DIAM.CONDOR RD T/UNIV. 115X22
Descrizione
6650
115x22
Z-DISCO DIAM.CONDOR RD T/UNIV. 230X22
6650
230x22
Z-DISCO DIAM.CONDOR RK T/UNIV. 115
6650
115
DIAMOND DISCS FOR GRANITE CUTTING
Used for stoneware, ceramic, granite, marble, tiles.
Descrizione
Z-DISCO DIAM.RS
T/GRANITO 115
Max rpm
Size
13300
115
DIAMOND DISCS FOR CERAMIC AND GLASS
Used for ceramic, stoneware and tiles.
Descrizione
Z-DISCO DIAM.SMY
T/CERAMICA 110
Max rpm
Size
13800
110
71
DIAMOND DISCS FOR GROOVES
Diamond disc for grooves. Cement, concrete, bricks, tiles, granite and natural stone.
Descrizione
Z-DISCO DIAM.SPARTAN KF UNIV.SR9 230X22
Max rpm
Size
6650
230x22
ZIRCONIUM FLAP DISCS
Flap discs for stainless steels and high strength steels.
Descrizione
Ø mm
Hole mm
Grain
Z-DISCO LAMELLARI ZIRC.115 GR. 36 NY
115
22,2
36
115
22,2
40
115
22,2
60
115
22,2
80
Z-DISCO LAMELLARI ZIRC.115 GR.120
115
22,2
120
HAMMER DRILL
With SDS Max joint. Reduced weight hammer drill. The sturdy hammer with SDS-max toolholder for holes
with diameters up to 38 mm. With chisel function for universal use. Long life even with the most difficult
applications thanks to the robust metal housing and compact design. Powerful 1,050 W high concrete
drilling rate thanks to optimization of the percussion technique Various-Lock with 12 different chisel
positions. Safety no-overload clutch. Toolholder SDS-max Drilling in concrete with hammer drill bits 16-38
mm. Diameter in concrete with breakthrough drill bits 45 - 55 mm. Drilling diameter in concrete with core
cutters 40-90 mm.
Descrizione
Z-BOSCH-MARTELLO GBH 5-38 D 0611240003
Power W
Power of hit J:
Weight without
load kg:
Holes:
1050
5,9
5,8
16_38
MAX HAMMER DRILL
Hammer drill powerful in drilling and chiselling, equipped with the innovative system SDS-max comfort,
it has an impact force that is up to 10 Joules in drilling and increases to 11 Joules in chiselling thanks to
Turbopower. This allows to easily drill holes up to 40 mm diameter in concrete or carry out repairs without
difficulty. This is possible thanks to Constant Electronic which allows to maintain the constant speed even
under strain. The new “SDS-Max Comfort” simplifies the work on site, enabling quick change tool with
one hand while the other should hold the hammer. It’s enough to back the adjusting nut with one hand,
so that the spindle remains automatically in the open position and the user can remove the accessory.
Once inserted the new tip, the ring locks automatically and it will be possible to continue the work. The
vibrations are reduced at two points: on the impact mass and handle. A cushion of air reduces the pressure between the piston and the impact mass. This cushion counteracts the oscillations and, like a spring,
reduces vibration to the point of origin: the impact mass.
Descrizione
Power W
Power of the
hit J:
Weight kg:
Holes:
72
Descrizione
Z-BOSCH-MARTELLO GBH 5-40DE 0611241703
Power W
Power of the
hit J:
Weight kg:
Holes:
1150
8,8
6,2
12_40
DRILL DRIVER
Drill driver with battery percussion (2 batteries). Fast and robust. For drilling and screwing diameters from
medium to large. Extremely durable and long lasting. The tightening torque allows a gradual increase in
exact setup for each size of screw. Ergonomically shaped handle for a secure grip to work without effort.
Replaceable brushes. Hole wood diameter 40 mm max. Hole steel diameter 13 mm max. Hole masonry
diameter 14 mm max.
Descrizione
Z-BOSCH-TRAPANO GSB 14,4 VE-2 0601994H00
Max n. of hits:
Charge duration
29000 R/min
30 min
PERCUSSION DRILL
Percussion drill with 2 speeds. Durable metal armor gear ensures long vitality. Anti-Rotation safety
clutch ensures safety. Keyless chuck with Bosch Auto-Lock. Brushes rotating platform with equal power
in forward and reverse rotation. New safety handle with innovative fixing for a secure grip of the tool.
Ball hitch for a maximum range of action and to avoid breakage of the cable. Preset speed control with
setting wheel for working in the variety of materials. Softgrip for a safer and more comfortable grip. The
collar diameter which is 43 mm (European standard), can also be used in drill stands. 18-13 mm concrete
hole diameter. 40-25 mm wood hole diameter hole. 13-8 mm steel hole diameter. 20-15 mm stone hole
diameter. 20-15 mm masonry hole diameter.
Descrizione
Z-BOSCH-TRAPANO GSB 19-2E 060117B500
Power W
Supplied power W:
Weight kg:
850
430
2,6
BATTERY SWING DRILL
Cordless swing drill. Nickel cadmium battery. Energy management: Battery 14.4V. Maximum rotational
force: 22 Nm. Maximum screw diameter of 6 mm. Steel hole diameter up to 10 mm. Masonry hole diameter 12 mm max. Max 25 mm wood hole diameter.
Descrizione
Z-SKIL-TRAPANO 2497 14,4V. F0152497AB
Weight g
2100
73
CLAMPING CHUCK
Descrizione
Z-BOSCH-MANDRINO 13 AUTOSERR. 2608572105
HILLS ROLLED SHORT SERIES TWIST DRILLS
In HSS, forged, rolled tips. Cylindrical shank, 118° cutting angle, burnished finish. In accordance with DIN
338 standards, diameter tolerance h8. Suitable for drilling of all the metals in general, iron, non-alloy steel
construction with a tensile strength up to R: 600 N/mm2. It is recommended the use of tips lubricating,
where possible, with cutting oil or emulsion.
Ø mm
L1 mm
L2 mm
Z-HOD-PUNTE HSS CORTE HILLS 1,5
Descrizione
1,5
40
18
Z-HOD-PUNTE HSS CORTE HILLS 2
2
49
24
2,5
57
30
3
61
33
3
70
39
3,75
70
39
4
75
43
4,5
80
47
5
86
52
5,25
86
52
5,5
93
57
6
93
57
6,5
101
63
7
109
69
8,5
117
75
9
125
81
74
REDUCED TANG HSS DRILL BITS
Twist cylindrical rolled drills with reduced tang short series.
Ø mm
L1 mm
L2 mm
Z-HOD-PUNTE HSS CODOLO RID. HPU101 13,5
Descrizione
13,5
160
108
Z-HOD-PUNTE HSS CODOLO RID. HPU101 14
14
160
108
14,5
169
114
15
169
114
15,5
178
120
16
178
120
16,5
184
125
17
184
125
17,5
191
130
18
191
130
18,5
198
135
19
198
135
19,5
205
140
20
205
140
ADJUSTED TWIST DRILLS SHORT SERIES
In HSS, adjusted drills. Cylindrical shank, 118° cutting angle, burnished finish. In accordance with DIN 338
standards, diameter tolerance h8. Recommended for precision holes. Suitable for drilling of all the metals
in general, iron, alloy steels with a tensile strength up to R: 800 N/mm2. It is recommended the use of tips
lubricating, where possible, with cutting oil or emulsion.
Descrizione
Ø mm
L1 mm
L2 mm
1
34
12
Z-HOD-PUNTE HSS CORTE HPU110 1,25
1,25
38
16
1,5
40
18
1,75
46
22
2
49
24
2,25
53
27
2,5
57
30
2,75
61
33
3
61
33
3,25
65
36
3,5
70
39
3,75
70
39
4
75
43
4,25
75
43
Z-HOD-PUNTE HSS CORTE HPU110 1
75
Descrizione
Ø mm
L1 mm
L2 mm
4,5
80
47
4,75
80
47
5
86
52
5,25
86
52
5,5
93
57
5,75
93
57
6
93
57
6,25
101
63
6,5
101
63
6,75
109
69
7
109
69
7,25
109
69
7,5
109
69
7,75
117
75
8
117
75
8,25
117
75
8,5
117
75
8,75
125
81
9
125
81
9,25
125
81
9,5
125
81
9,75
133
87
10
133
87
10,25
133
87
10,5
133
87
10,75
142
94
11
142
94
11,5
142
94
12
151
101
12,5
151
101
13
151
101
20
205
140
76
5% ADJUSTED COBALT TWIST DRILLS SHORT SERIES
Special super fast “HSS” 5% cobalt steel drills entirely adjusted. Cylindrical shank, 135°cutting angle SPLIT
POINT. In accordance with DIN 338, diameter tolerance h8. Suitable for drilling in stainless steels, cast iron
and non-alloy steel with a tensile strength of up to R: 1200 N/mm2. It is recommended the use of tips
lubricating, where possible, with cutting oil. FEATURES: High wear resistance and excellent resistance to
thermal strain.
Descrizione
Ø mm
L1 mm
L2 mm
1
34
12
1,25
1,25
34
12
Z-PUNTE HSS+CO5%
1,50
1,5
40
18
Z-PUNTE HSS+CO5%
1,75
1,75
43
20
Z-PUNTE HSS+CO5%
2
2
49
24
Z-PUNTE HSS+CO5%
2,25
2,25
53
27
Z-PUNTE HSS+CO5%
2,50
2,5
57
30
Z-PUNTE HSS+CO5%
2,75
2,75
61
33
Z-PUNTE HSS+CO5%
3
3
61
33
Z-PUNTE HSS+CO5%
3,25
3,25
65
36
Z-PUNTE HSS+CO5%
3,50
3,5
70
39
Z-PUNTE HSS+CO5%
3,75
3,75
70
39
Z-PUNTE HSS+CO5%
4
4
75
43
Z-PUNTE HSS+CO5%
4,25
4,25
75
43
Z-PUNTE HSS+CO5%
4,50
4,5
80
47
Z-PUNTE HSS+CO5%
4,75
4,75
80
47
Z-PUNTE HSS+CO5%
5
5
86
52
Z-PUNTE HSS+CO5%
5,25
5,25
86
52
Z-PUNTE HSS+CO5%
5,50
5,5
93
57
Z-PUNTE HSS+CO5%
5,75
5,75
93
57
Z-PUNTE HSS+CO5%
6
6
93
57
Z-PUNTE HSS+CO5%
6,25
6,25
101
63
Z-PUNTE HSS+CO5%
6,50
6,5
101
63
Z-PUNTE HSS+CO5%
6,75
6,75
101
63
Z-PUNTE HSS+CO5%
7
7
109
69
Z-PUNTE HSS+CO5%
7,25
7,25
109
69
Z-PUNTE HSS+CO5%
7,50
7,5
109
69
Z-PUNTE HSS+CO5%
7,75
7,75
117
75
Z-PUNTE HSS+CO5%
8
8
117
75
Z-PUNTE HSS+CO5%
8,25
8,25
117
75
Z-PUNTE HSS+CO5%
8,50
8,5
117
75
Z-PUNTE HSS+CO5%
8,75
8,75
125
81
Z-PUNTE HSS+CO5%
1
Z-PUNTE HSS+CO5%
77
Descrizione
Ø mm
L1 mm
L2 mm
9
125
81
Z-PUNTE HSS+CO5%
9
Z-PUNTE HSS+CO5%
9,25
9,25
125
81
Z-PUNTE HSS+CO5%
9,50
9,5
125
81
Z-PUNTE HSS+CO5%
9,75
9,75
133
87
Z-PUNTE HSS+CO5%
10
10
133
87
Z-PUNTE HSS+CO5%
10,25
10,25
133
87
Z-PUNTE HSS+CO5%
10,50
10,5
133
87
Z-PUNTE HSS+CO5%
10,75
10,75
142
94
Z-PUNTE HSS+CO5%
11
11
142
94
Z-PUNTE HSS+CO5%
11,25
11,25
142
94
Z-PUNTE HSS+CO5%
11,50
11,5
142
94
Z-PUNTE HSS+CO5%
11,75
11,75
142
94
Z-PUNTE HSS+CO5%
12
12
152
101
Z-PUNTE HSS+CO5%
12,25
12,25
152
101
Z-PUNTE HSS+CO5%
12,50
12,5
152
101
Z-PUNTE HSS+CO5%
12,75
12,75
152
101
Z-PUNTE HSS+CO5%
13
13
152
101
DRILLS WITH SDS/MAX JOINT
The particular conformation of the head with three cutting edges allows a rapid penetration even in the
hardest concrete. It facilitates the removal of the crushed materials. Suitable for drilling concrete, natural
stone and wall. Suitable for electro-pneumatic hammers of more than 5 kg with SDS MAX joint.
Descrizione
Ø mm
L1 mm
L2 mm
Z-HOD-PUNTE MURO SDS/MAX HPU210 12 X340
12
340
200
12
540
400
14
340
200
14
540
400
16
340
200
16
540
400
18
340
200
18
540
400
20
320
200
20
520
400
22
320
200
22
520
400
25
320
200
25
520
400
78
Descrizione
Ø mm
L1 mm
L2 mm
25
920
800
28
370
250
28
570
450
30
370
250
30
570
450
32
370
250
32
570
450
Z-HOD-PUNTE MURO SDS/MAX HPU210 32X920SL
32
920
800
35
570
450
38
570
450
40
570
450
DRILLS WITH SDS/PLUS JOINT
Hard metal plate welded to the body for special copper alloy brazing. The propeller, with a new design
S4L with four spirals, ensures optimum discharge of dust. 130°cutting angle - SDS/PLUS. Head geometry
for aggressive rapid drillings. More productivity (+35%), more tip life (+35%). To use on electro-hammers
for drilling natural stones, bricks, concrete, etc..
Descrizione
Ø mm
L1 mm
L2 mm
Z-HOD-PUNTE MURO SDS/PLUS HPU200 4 X110
4
110
50
5
110
50
5
160
100
6
110
50
6
160
100
6
210
150
7
110
50
7
160
100
8
110
50
8
160
100
8
210
150
8
260
200
8
310
250
8
450
400
9
160
100
9
210
150
10
160
100
10
210
150
10
260
200
79
Descrizione
Ø mm
L1 mm
L2 mm
10
310
250
10
450
400
10
600
550
11
160
100
12
160
100
12
210
150
12
260
200
12
310
250
12
450
400
12
600
550
14
160
100
14
210
150
14
260
200
14
450
400
15
160
100
16
160
100
16
210
150
16
250
175
16
310
250
16
450
400
17
200
125
18
200
125
18
250
175
18
310
250
18
450
400
20
200
125
20
450
400
22
450
400
24
450
400
26
450
400
80
HSS TITANIUM DRILL BITS
Titanium nitride coated bits last up to six times longer than standard high speed steel drill bits. Cutting
edge stays sharper longer, titanium nitride coating reduces friction, manufactured to DIN 338 Standards.
Applications: repetitive metal drilling with portable drills, stationary drill presses.
Descrizione
Ø mm
Working Lenght
Z-PUNTE HSS TITANIO
1,00
1
12
200
Z-PUNTE HSS TITANIO
1,50
1,5
18
200
Z-PUNTE HSS TITANIO
2,00
2
24
200
Z-PUNTE HSS TITANIO
2,50
2,5
30
200
Z-PUNTE HSS TITANIO
3,00
3
33
200
Z-PUNTE HSS TITANIO
3,50
3,5
39
200
Z-PUNTE HSS TITANIO
4,00
4
43
200
Z-PUNTE HSS TITANIO
4,50
4,5
47
200
Z-PUNTE HSS TITANIO
5,00
5
52
200
Z-PUNTE HSS TITANIO
6,00
6
57
200
Z-PUNTE HSS TITANIO
7,00
7
69
100
Z-PUNTE HSS TITANIO
8,00
8
75
100
Z-PUNTE HSS TITANIO
9,00
9
81
100
Z-PUNTE HSS TITANIO 10,00
10
87
100
11
94
50
12
101
50
13
101
50
BOSCH JIGSAW
Jigsaw with oscillation of the blade in 4 positions and dust extraction.
Descrizione
Z-BOSCH-SEGHETTO GST 75 BE 060158E000
Voltage:
Power:
Weight w/o
load:
Cutting
deep in
wood:
Cutting
deep in
aluminium:
Cutting
deep in
steel:
230 V
650 W
2,3 kg
90 mm
20 mm
10 mm
81
SKIL JIGSAW
Variable speed and orbital adjustment handy Jigsaw. The good visibility of the cutting line is provided by
a blower function which can be activated just like the integrated spotlight that allows to work even under
less than optimal lighting.
Descrizione
Power W:
Z-SKIL-SEGHETTO ALT. 4581 F0154581AA
710
ULTRA JIGSAW BLADES
CV alloy steel blade. For wood, plywood and plastic up to 30 mm thick. Toothing ground - cutting super
fine. CV alloy steel. For wood and chipboard up to 50 mm thick. Sharp straight-set toothing - Fine and
quick cut. In HSS. For steels up to 3 mm thick and non-ferrous metals up to 6 mm thick. Milled wavy
toothing - ordinary cutting. IN BOXES OF 20 BLISTER.
Descrizione
Pitch mm
Lenght mm
Z-HOD-LAME 8001 ULTRA 5 LAME
2,5
74
4
70
1,2
50
40W ELECTRIC GLUE GUN
Semiconductors heating System. No-drop nozzle. Bonding in 6 seconds on paper, cardboard, PVC, plexiglass, plastic, ceramic, glass, wood, leather, textiles, metal, carpet, insulated windows. Supplied complete
with stand and glue. Voltage 220 V - max temperature 193°C degrees. PACKED IN A HANGING DOUBLE
BLISTER.
Descrizione
Z-HOD-INCOLLATRICE ELETT. HF 3200/40
Power W
40
Z-HOD-COLLA BARRETTE HF3210 TRASP.KG.2,5
82
ELECTRICAL MATERIALS INDUSTRIAL CABLE REEL
Cable reels for industrial use inside and outside, built according to EN 61316. Also suitable for environments where there are particularly harsh conditions, such as construction sites and/or demolitions.
Constructed with thermoplastic materials that pass the tests of resistance to shock and temperature
changes. Approved flexible cord in abrasion resistant rubber (Neoprene) H07RN-F. Indelible technical
features in the label of the item. Thermal circuit breaker which shall automatically disconnect power to
the sockets block in the event of overheating both in rolled and unrolled cable; manual reset by pressing
the red button after that the temperature will be restored to normal levels.
Cable lenght mt.
Cable size:
Plug:
N. and sockets
type:
Z-EL-AVVOLG. M.30 3X2,5 H07RN-F 11128
30
3G2,5
2P+T 16A 230V IP44
3 sockets 2P+T 16A
230V IP44
Z-EL-AVVOLG. M.30 4X2,5 H07RN-F 11164
30
4G2,5
3P+T 16A 400V IP44
3 sockets 3P+T 16A
400V IP44
Descrizione
INDUSTRIAL CABLE REEL WITH TROLLEY
Cable reels for industrial use inside and outside, built according to EN 61316. Also suitable for environments where there are particularly harsh conditions, such as construction sites and/or demolition.
Constructed with thermoplastic materials that pass the tests of resistance to shock and temperature
changes. Approved flexible cord in abrasion resistant rubber (Neoprene) H07RN-F. Indelible technical
features in the label of the item. Thermal circuit breaker which shall automatically disconnect power to
the sockets block in the event of overheating both in rolled and unrolled cable; manual reset by pressing
the red button after that the temperature will be restored to normal levels. Article O420 mm drum trolley
with wheels. The cable reel trolley is suitable for installation in distribution panels 250 and 350 mm, consistent with the type of plug socket.
Cable lenght mt.
Cable size:
Plug:
N. and sockets
type:
Z-EL-AVVOLG. M.50 3X2,5 2P+T 16/A 12128
50
3G2,5
2P+T 16A 230V
IP44
3 sockets 2P+T 16A
230V IP44
Z-EL-AVVOLG. M.50 3X2,5 2P+T 16/A 12160
50
3G2,5
2P+T 16A 230V
IP67
3 sockets 2P+T 16A
230V IP67
Z-EL-AVVOLG. M.50 4X2,5 3P+T 16/A 12170
50
4G2,5
3P+T 16A 400V
IP67
3 sockets 3P+T 16A
400V IP67
Descrizione
INDUSTRIAL SOCKET
Mobile industrial socket. Built according to EN 60309 -1/2. Mating connector suitable for use in various
sectors: industrial, commercial, agricultural, construction, etc.. Made of self-extinguishing thermoplastic
material resistant to heat and fire according to IEC 695-2-1 (GLOW-WIRE test). High impact resistance,
even at low temperatures.
Descrizione
Socket features:
Z-EL-PRESA IND.VOL. 2P+T 16A 230V 71100
6h. IP44
6h. IP67
6h. IP44
6h. IP44
83
Descrizione
Socket features:
6h. IP67
6h. IP44
6h. IP67
Z-EL-PRESA IND.VOL.3P+N+T 16A 400V 71105
6h - IP44
6h - IP44
6h - IP67
MULTIPLE SOCKET 3P.
Descrizione
Z-EL-MULTIP. M.1,5 3X1 3P.16A+T 41010
MULTIPLE SOCKET 6P.
Descrizione
Z-EL-MULTIP. M.1,5 3X1 6P. 10/16A 41103
TRIPLE ADAPTOR
Descrizione
Z-EL-ADATT. TRIPLO SPINA 2P+T 10A 82210
84
SOCKET
Descrizione
Z-EL-PRESA BIPASSO 2P+T 16A BIANCA 81000
LAMP
Descrizione
Z-EL-LAMPADA M.10 2X0,75 PROT.FER. 61060
85
AUTOGENOUS WELDING PRESSURE REDUCERS UNI SERIES
The new UNI series pressure reducers combine the high reliability of their predecessors (ENI series) from
which they inherit all construction technologies and reliable internal solutions (encapsulated valve) in total compliance with the new regulations to whom are strictly respondents. FEATURES: safety valve against
overpressure in pre-set monoblock, a single block shutter (reliability/durability/ease of substitution),
painted gearbox body (greater aesthetics, maximum durability and weather resistance), sintered stainless
steel shutter entrance filter (protection from any impurities that arrives from the bottle), BAM certificates
(German institution), already designed for use with 300 bar tank, all individually tested at the maximum
pressure at the end of production. Two pressure gauges.
Descrizione
Max capacity m3/h
D:
Weight kg:
Z-MU-RIDUTTORE ACETIL.ISO2503 UNI10250
10
A+
1,9
Z-MU-RIDUTTORE OSSIGENO ISO2503 UNI10100
40
A+
1,65
PRESSURE REGULATOR VALVES
Should be fixed to the pressure reducer output (3/8” joint). Guarantee total protection with backfires
(FA) and backgas (NV). Thanks to their compact size they are easy to fix at the output in any regulator
and ensure adequate capacity even for cutting up to 300 mm. Max capacity: 50 m3/h oxygen, 12 m3/h
acetylene. Fully chromed.
Descrizione
Description:
D:
Weight kg:
Z-MU-VALV.MV93 ACETILENE 3/8” 80255
Valve RP 3/8”
A+
0,25
Z-MU-VALV.MV93 OSSIGENO 3/8” 80205
Valve RP 3/8”
A+
0,25
CUTTING TORCH
Chrome cutting torch for thicknesses up to 150 mm for all applications. The mixing in the entrance ensures safe use as distance covered by the gas already mixed is minimum. With dual-gas injector can be used
both with propane and acetylene.
Descrizione
Z-MU-CANN.TAGLIO SIDER 2000 A LEVA 63100
Z-MU-CANN.TAGLIO SIDER 2000 RUBIN. 63000
86
BRASS HANDLE
With two regulating valves.
Descrizione
Z-MU-IMPUGNATURA OTTONE
40100
CUTTING NOZZLE
Standard for mujver torch.
Descrizione
Description:
Z-MU-LANCIA TAGLIO AD
45000
Acetylene nozzle
Z-MU-LANCIA TAGLIO GPL
45500
Propane nozzle
CUTTING TIP
Three cones automixing. Acetylene/AD
Consumption
m3/h OX
Consumption
m3/h GAS
Thickness
mm
Range:
D:
Weight kg:
Z-MU-PUNTA MIX ACETILENE 3- 10 EX46500
1,2
0,35
10
3-10
A
0,105
3
0,5
25
10-25
A+
0,105
8
0,6
50
25-75
A+
0,105
Z-MU-PUNTA MIX ACETILENE 75-125 EX46650
15
0,7
100
75-125
A+
0,105
20
0,9
150
125-175
A+
0,105
25
1,2
200
175-225
A
0,105
Descrizione
87
HOSE-THREAD VALVES
Fixed to the handle and can accommodate from 6 to 8 mm inner diameter hoses (6x13 and 8x15). They
execute 2 functions: anti-backfire, anti-gas return, max load: 40 m3/h oxygen, 10 m3/h acetylene.
Descrizione
Description:
D:
Weight kg:
Z-MU-VALV.MV93 ACETIL./GPL TF 3/8” 80950
Acetylene valve/GPL/
H2-M 3/8”
A+
0,138
Z-MU-VALV.MV93 OSSIGENO TF 3/8” 80900
Valve TF Oxygen 3/8”
A+
0,138
HOSE-HOSE VALVES
TT Safety valves (hose-hose).
Descrizione
Description:
D:
Weight kg:
Z-MU-VALV.MV93 ACETIL./GPL TT 80750
Valve TT Acetylene/
GPL/H2
A+
0,106
Z-MU-VALV.MV93 OSSIGENO TT 80700
Valve TT Oxygen
A+
0,106
CHIPPING HAMMER
For welder
Descrizione
Z-MU-MARTELLINA BATTISCORIE WP21103
88
Annotazioni:
Annotazioni:
Annotazioni:
FIP ARTICOLI TECNICI S.r.l.
Viale Regione Veneto,9
35127 Padova - Italy
Tel: +39 049/8992211
Fax: +39 049/8701069
E-mail: [email protected]
www.fipitaly.com

flat-tip screwdrivers - Fip Italy articoli tecnici

Transcript

Documenti analoghi

Stampa/PDF

Stampa/PDF

Unopened and sealed BALKAN SOBRANIE 250g

star/winter jacket - Fip Italy articoli tecnici

level crossing display system for the crossing

catalistino - Fip Italy articoli tecnici

Dear Sirs, We will present our new Spring/Summer

CONFIDENTIAL AGREEMENT

istruzioni di montaggio powerline squat rack pss60x

Mini Eolic Monitoring Station