Scheda tecnica Dip-K5 Probe Inglese.cdr

DueBi
srl
Sistemi per pulizia e igiene nell’Industria Alimentare e nella Zootecnia
Sede legale
: via Villani, 2 - 26900 - Lodi
Sede operativa : via Napoli, 6 - 26900 - Lodi
P.IVA 03313430963 - R.E.A. 1452054
e-mail [email protected]
Tel. (39) 0371 610210
Fax (39) 0371 417859
Probe DIP-K5
Code 3040
Description
The conductivity probe DIP-K5 can easily be installed in washing tanks,
reservoirs etc.,
where other type of probes can result in difficult
applications. The probe is higly reliable and very strong because is totally
made of stainless steel. It can be connected to many controllers as MP100,
MATRIX, COMPACT ect. The probe is temperature compensated and can be
manufactured on request with different thermal sensor i.e. Pt100/Pt1000 in
two wires technology.
DIP-K5 can also be supplied in different lenght, on request.
The standard probe (K5) controls conductivity values up to 100 mS.
Fitting thread
M1” G
Seal
Viton 4131
Wet parts
AISI 304-PVDF
Epoxy resin-carbon
Operating temperature
90°C. max.
Connector 3 poles
DIN 43650/A-IP65
PG9/11
Body
AISI 304
Size
D. 28 mm. max.
Immersion lenght
1000 mm.
Weight
1900 grs.
10/05
Main features