Ultraporex B - Michele Caroli Srl

Commenti

Transcript

Ultraporex B - Michele Caroli Srl
GB
Technical Data Sheet
Page 1 of 2
Ultraporex B
The prefilter for the removal of oil, water and dust particles
with absolute retention efficiency.
Product description:
The Ultraporex prefilter contains the highly porous sinter bronze filter medium.
It ensures the retention of coarse solid
and liquid particles.
Characteristics:
By utilising various filtration mechanisms
such as retention by direct impact, sieve
effect and diffusion effect, liquid aerosols
and solid particles will be retained in the
filter down to a 25 µm particle size.
The high-grade sinter bronze medium
guarantees not only a high load of contaminants but also the regeneration of the
filter element.
Ultraporex depth filter
Applications:
Element
Type
Flowrate
at 7 bar g
m3/h *
Operating
Pressure
bar g
Pressure
conversion factor
fp
0035
0035
1
0.25
0070
0070
2
0.38
The Ultraporex prefilter is for example
being utilised in the following industries
0120
0120
3
0.50
0210
0210
4
0.63
• Particle filtration downstream cyclonic
separators
0320
0320
5
0.75
0450
0450
6
0.88
1.00
• Central pre-filtration in compressor
stations
0600
0600
7
• Removal of larger amounts of
condensate
0750
0750
8
1.13
1100
1100
• Pre-filter upstream filter grades “M” and
“S”
Sizing example for pressure which
deviates from nominal pressure:
• Applications with agressive
condensates
Vnom = 350 m3/h, operating pressure = 9 bar (g)
.
.
Vcorr =
.
Vcorr =
9
1.25
10
1.38
11
1.50
12
1.63
Vnom
13
1.75
fp
14
1.88
15
2.00
16
2.13
.
350 m3/h
1.25
= 280 m3/h
Calculated Size: Type 0320
* m3/h related to 1 bar abs. and 20°C
Technical alterations reserved (R01/ 2007/07/18)
Donaldson Filtration Deutschland GmbH · Industrial Filtration Solutions · Büssingstraße 1 · D-42781 Haan · Telefon +49/21 29/569-0 · Telefax +49/21 29/569-100
GB
Technical Data Sheet
Page 2 of 2
Ultraporex B
Features:
Benefits:
Materials:
Void volumeporosity grade larger than 60%
High dirt holding capacity:
lower differential pressure
Filter medium
Regenerative- repeatable regeneration possible, combined with exact
retention rates
Economical, longer service life time
Pure,
sintered bronze
material no. 2.1052
Bonding
Polyurethane
End caps
Glass fibre
reinforced polymer
Retention rate:
O-Rings
Perbunan:
silicone free and free
of compound
(Standard)
100% in gases;
defined retention rate of particles
larger than the pore size (25 µm)
Differential pressure of a B- filter element incl. filter housing in dry condition
at 8 bar absolute
120 mbar
dry
Differential Pressure
100 mbar
80 mbar
60 mbar
40 mbar
20 mbar
0 mbar
20%
40%
60%
Nominal Flow Rate
80%
100%

Documenti analoghi

AGX Shock Absorbers

AGX Shock Absorbers Double tube adjustable shock absorbers and gas cartridges. The KYB AGX adjustable gas shock absorb

Dettagli